ELECTROBRAZE PIN BRAZING

ELECTROBRAZE PIN BRAZING

ELECTROBRAZE PIN BRAZING

PIN BRAZING

PIPELINE EARTHING & ISOLATION ACCESSORIES DATASHEET 4.3.1

REVISION 1

Venture Way, Grantham, Lincs NG31 7XS UK. Tel: +44 (0)1476 590666 Fax: +44 (0)1476 570605Email: cpc@cathodic.co.uk Website: www.cathodic.co.ukRegistered Office: Minalloy House, Regent Street, Sheffield S1 3NJ, UK VAT No. 116 8408 71, Reg’d in England No. 478098

DATASHEET4.3.1

PIN BRAZING CONSUMABLES

PACK SIZES

There are two basic types of connection that can be made

• Threaded Type Connection using an M8, M10 or M12 Threaded Brazing Pin. A normal copper crimp lug (suppliedseparately) is attached to the stud and secured in place with locknuts and washers (included with pin).

• Direct Type Connection using an 8mm Direct Brazing Pin and a Pin Brazing cable lug, available to suit cable sizes10mm2 to 50mm2

For each type of connection a ceramic ferrule is required for each braze in either 12mm (threaded connection) or 8mm(direct connection) size

Direct Brazing Pin 8mm : 100 No Threaded Brazing Pin M12 : 40 No

Threaded Brazing Pin M8 : 50 No 8mm Ceramic Ferrule : 200 No

Threaded Brazing Pin M10 : 40 No 12mm Ceramic Ferrule : 100 No

Datasheet 4.3.1 7/8/08 09:55 Page 2