1

www.krugg.us

Bathroom Cabinet Installation & User Guide

KINETIC

2

www.krugg.us

WARNING:• All fittings must be installed in

accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.

• Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.

• Suitable for Bathroom Zones 2, 3 and non bathroom/dry areas. See diagram below.

• NOT suitable for above baths or Zone 1 nor for installation in Saunas, Steam Rooms or Shower Cubicles.

• DO NOT connect to a plug and socket outlet. Suitable for indoor use only.

• Do not fix to damp or conductive surfaces .

• Site well away from curtains and fabrics. • Never cover the mirror. • Switch off after use

3

www.krugg.us

• Inspect the product immediately upon receipt for transit damage or missing parts.

• Handle the product with care and protect against knocks to all sides and edges of the glass.

• Make sure that you have all the tools you need to complete the job (SEE BELOW)

• Ensure there are no hidden pipes or cables in the wall before drilling.

TOOLS USED

Aftercare Instructions• Clean using a soft dry cloth only when

turned off.• Never use cleaning agents or abrasive

materials.• Do not allow moisture to come into

contact with lamps.

• If drilling holes in ceramic tiles use a piece of masking tape on the tile to stop the drill bit from slipping.

IMPORTANT—BEFORE YOU BEGIN

4

www.krugg.us

ELECTRICAL WIRE INFORMATIONKinetic Electrical ConnectionThe LED Driver inside the enclosed Kinetic Cabinet has already converted the electric to 110 volts. You can connect the wires that are coming out of the center of the back of the mirror directly to your electrical connection box. The lead contains 3 wires:• Copper Wire (Green) = GROUND wire.... connect to ground wire in your box, or to the box

as a ground.• White (or can be Brown) = NEUTRAL wire.... connect to the White neutral wire in your box.• Black (or can be Blue) = HOT wire.... connect to the Black hot wire in your box.

The Kinetic Cabinet wires get connected to your 110 Volt electric box that you should have placed in the wall, behind where your Kinetic Cabinet will be mounted. It doesn’t have to be exactly in the center as the lead wire gives you flexibility in the placement. However we suggest you place it somewhere towards the center.

CONTENTS OF THE BOX

CABINET WITH ELECTRICAL COMPONENTS

MIRROR DOOR GLASS SHELF

GLASS PARTITION ANCHORS SCREWS

5

www.krugg.us

Position the cabinet up to the wall with the label on top. Make it sure it’s nice and flat against the wall.

Mark out each anchor position onto the wall.

Connect the electrical wires. (It requires 2 people to hold the cabinet and the one connecting the wires).

Use 5/16 Drill Bit to make the holes inside to the wall and position Anchors that included in the hardware kit.

STEP 1

STEP 4STEP 3

STEP 2

6

www.krugg.us

Reposition the cabinet where the mark of the holes from anchors, and screw in with the screws provided on the tip of each position.

Attach the glass partition covering the electrical wires using th Philips screws provided in the hardware kit.

Attach the mirror onto the cabinet. Coordinate the holes on the rails (top and bottom) to the holes on the cabinet and attach.

Slide the mirror over, to expose the other side. Screw the top and bottom portion.

STEP 5 STEP 6

STEP 7 STEP 8

7

www.krugg.us

The shelf is independent of the switch inside the cabinet, which turns on the light. You can use it for anything.

Position the glass shelf over the attached anchors inside the cabinet. You can position it at any height as you wish.

STEP 10STEP 9

USE AND MAINTENANCE• The cabinet door and interior are constructed of mirrored glass and aluminum. Use only a

damp cloth to clean. Ammonia or vinegar-based cleaners can damage mirrors.• When cleaning, spray the cloth, not the cabinet, mirror, or surround surfaces. Do not use

abrasive cleansers on any part of the light fixture.

8

www.krugg.us

LIMITED WARRANTY, THREE-YEAR TERMKRUGG is not responsible for installation costs. The warranty time period for operating components including door hinges and opening devices to the original owner extends beyond the three-year term. The warranty is void in the event the product is damaged in transit, or if damage or failure is caused by abuse, misuse, abnormal usage, faulty installation, damage in an accident, improper maintenance, or any repairs other than those authorized by KRUGG. At the expiration of the three-year warranty period, KRUGG shall be under no further obligation under any warranty, expressed or implied, including the implied warranty of merchantability. KRUGG shall not be liable for any consequential damages arising out of or in connection with the use or performance of its products. Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any liability against KRUGG under any implied warranty, including the warranty of merchant-ability, is expressly limited to the terms of this warranty. Permission to return any merchandise under this warranty must be authorized by KRUGG and returned prepaid by the purchaser.