electrical test & measurement equipment · electrical test & measurement equipment 844 ......

ELECTRICAL TEST &MEASUREMENT EQUIPMENT

www.protecequip.com 844-PROTEC-0

ABOUT US

Founded by Kevin Nichols in 2004, Protec Equipment Resources, Inc. has been the leader in electrical test equipment rental for over 10 years. We service our customers with a singular focus To Be the Best at What We Do … By a Wide Margin.

Our service has become Legendary within the electrical testing community, and we pride ourselves on continual improvement, centered around our company’s Core Values:

• To Be the Best at What We Do … By a Wide MarginWe accomplish this by employing a team of professionals with a passion to be the Best and a Commitment to Excellence in everything we do.

• Character & IntegrityBuilding trust through ethical and honorable conduct in all our dealings with customers, vendors, and one another.

• TeamworkA commitment to each other and an exceptionally high level of interpersonal support.

• Legendary Customer ServiceOur service is Legendary. We care deeply about our customers and their suc-cess, and strive to provide superior customer service, from working after hours to driving 800 miles overnight for an emergency job … we are there when and where you need us.

Table of Contents

BATTERY TEST EQUIPMENT

Battery Ground Fault Testers .........................................................................32Megger Battery Ground Fault LocatorMegger Battery Ground Fault Tracer

Battery Hydrometers ........................................................................................33Alber DMA-35-CRT Hydrometer with Data LoggingSBS-2002 Battery HydrometerSBS-2003 Digital Hydrometer /Density MeterSBS-3500 Hydrometer

Battery Impedance Test Sets .........................................................................34Megger BITE 2P Battery Impedance Test SetMegger BITE 3 Battery Impedance Test SetSBS IBEX-1000P Battery Impedance Test Set

Battery Load Unit Test Sets ............................................................................35Megger Battery Voltage MonitorMegger TORKEL 860 Battery Load UnitMegger TORKEL 950 Battery Load Unit

Battery Multimeters ..........................................................................................36Alber Cellcorder CRT-400 Cell Resistance Tester

Current Probes ....................................................................................................37RxMS 2000A 2” ID ProbeRxMS 4000A 4.5x2.5 ID ProbeRxMS Wireless Battery Dc ProbeRxMS Wireless DCx 10 Channel ProbeRxMS Wireless Communications DeviceRxMS Wireless Temperature and Humidity Probe


Power Quality Monitoring .................................................................................39RxMS Cx Monitor

HIGH POTENTIAL, CABLE & BUS TEST EQUIPMENT

AC Hipot Test Equipment ..................................................................................42Adwel HVA40-10 High Voltage AC HipotHigh Voltage ALT-120/60 120kV / 60kV AC HipotHigh Voltage PFT-1003CM 100kV 3kVA AC HipotHigh Voltage PFT-103CM 10kV 3kVA AC HipotHigh Voltage PFT-301CM 30kV 1.5kVA AC HipotHigh Voltage PFT-303 30kV 3kVA AC HipotHigh Voltage PFT-503CM 50kV 3kVA AC HipotHigh Voltage PFT-652CM 65kV 2kVA AC HipotHipotronics 100HVT 100kV 5kVA AC HipotHipotronics 750-2 50kV AC HipotMegger 230425 0-4 kV AC and 0-5 kV DC High-Pot Tester

Cable Fault Locating Test Equipment ..........................................................45Amprobe AT-3000 Underground Cable LocatorAquatronics EG 3000 Secondary Cable Fault LocatorAquatronics S.D.A.D. Acoustic Fault DetectorFault Wizard Portable Fault Location SystemHigh Voltage CDS-2010B ThumperFluke FOM Fiber Optic MeterHigh Voltage CDS-2010B 20kV ThumperMegger PFL22M1500 Power Cable Fault Locator SystemMegger PFL40A Power Cable Fault Locator SystemMegger SG32-1500M Power Cable Fault LocatorTIF 300HV Tic TracerUEI CLM100 Cable Length Meter

DC Hipots ............................................................................................................... 48Baker ST112A 12kV Surge TesterBaker ST124R 24kV Surge TesterHigh Voltage PTS-130 130kV DC HipotHigh Voltage PTS-200 200kV DC Hipot with Megohmmeter

HIGH POTENTIAL CABLE & BUS TEST EQUIPMENT

DC Hipots (cont.) ..................................................................................................49High Voltage PTS-75 75kV DC Hipot with MegohmmeterHigh Voltage PTS-80 80kV DC HipotHigh Voltage VLF-34E 34kV VLF HipotHigh Voltage VLF-65E 65kV VLF TesterHipotronics 880PL 80kV DC HipotHV Diagnostics HVA28TD 28kV VLF / DC High Voltage Test InstrumentHV Diagnostics HVA30 30kV VLF / DC High Voltage Test InstrumentHV Diagnostics HVA34 34kV VLF / DC High Voltage Test InstrumentHV Diagnostics HVA60 60kV VLF / DC High Voltage Test InstrumentHV Diagnostics HVA90 90kV VLF / DC High Voltage Test InstrumentHV Diagnostics TD90-MC 90kV Portable Tan Delta Measurement SystemMegger 230425 0-4 kV AC and 0-5 kV DC High-Pot TesterSKF (Baker) 12kV Static Motor Analyzer AWA-IV/12

Phasing Kits ........................................................................................................... 53Bierer PD800W Cordless Phasing TesterHD Electric Double Vision Dual Display Wireless Voltage Indicating Phaser - DDVIP-40HD Electric Mark II 45kV Phasing KitHD Electric MARK III 75k 75kV Dual Range Voltmeters and Phasing Set

Tan Delta Bridge Test Equipment .................................................................54High Voltage TD-34E 34kV Tan Delta BridgeHigh Voltage TDB-60 60kV Tan Delta BridgeHV Diagnostics TD30 30kV Tan Delta BridgeHV Diagnostics TD60 60kV Tan Delta Bridge

Time Domain Reflectometers (TDR) ............................................................. 55High Voltage TDR1669 Time Domain ReflectometerHipotronics TDR1130A Time Domain ReflectometerMegger CFL510F Hand-held Time Domain ReflectometerMegger CFL535G Advanced Dual Channel TDRMegger MTDR1 Single-Phase Time Domain Reflectometer

VLF Hipots .............................................................................................................. 57High Voltage ADL-1 Data LoggerHigh Voltage VLF-4022CM 40kV AC VLF HipotHigh Voltage VLF-6022 60kV VLF HipotHigh Voltage VLF-34E 34kV VLF Hipot

HIGH POTENTIAL CABLE & BUS TEST EQUIPMENT

VLF Hipots (cont.) ................................................................................................58HV Diagnostics HVA28TD 28kV VLF /DC High Voltage Test InstrumentHV Diagnostics HVA30 30kV VLF / DC High Voltage Test InstrumentHV Diagnostics HVA34 34kV VLF / DC High Voltage Test InstrumentHV Diagnostics HVA60 60kV VLF / DC High Voltage Test InstrumentHV Diagnostics HVA90 90kV VLF / DC High Voltage Test InstrumentHV Diagnostics TD90-MC 90kV Portable Tan Delta Measurement System

INSPECTION TEST EQUIPMENT

Borescopes ............................................................................................................62Everest VIT XLF8575B BorescopeEverest VIT XL875 Pro BorescopeOlympus IPLEX RT Videoscope

Dewpoint Analyzers ..........................................................................................63Cosa XPDM Portable Dew Point Meter

Electrostatic Locators ........................................................................................63Vaisala DM70 Dewpoint AnalyzerACL 300B Precision Electrostatic Locator

Infrared Cameras .................................................................................................64FLIR C2 Compact Thermal Imaging SystemFLIR T440 Thermal Imaging CameraFLIR T640 Thermal Imaging CameraFluke Ti32 Thermal ImagerFluke Ti55 IR FlexCam Thermal ImagerMikron 7200v Infrared Camera with Visual Light CameraOfil Systems DayCor Superb-OD Corona CameraExtech 42540 Infrared ThermometerFluke 63 Mini IR ThermometerFluke 66 Infrared ThermometerFluke ST60T Non-Contact Infrared ThermometerWavetek TMA10 Anemometer Thermometer


Light Meters ..........................................................................................................68AEMC CA811 LightmeterAEMC CA813 LightmeterFluke FOS-1300 Fiber Optic Light Source

Partial Discharge Test Equipment ................................................................69EA Technology UltraTEV Plus+ Partial Discharge DetectorEA Technology CableData CollectorPMDT PDetector Handheld Partial Discharge DetectorOmicron CAL 542 Charge CalibratorOmicron MCT 120 High-Frequency Current TransformerOmicron OMS 605 Portable Partial Discharge (PD) Monitoring SystemOmicron PD Terminal BoxOmicron UCS1 UHF Cable SensorOmicron UHF 620 Bandwidth ConverterOmicron UPG 620 Pulse Generator

Tachometers ......................................................................................................... 72Ametek 1726 Dual Function Digital TachometerMonarch Nova Strobe Digital Strobe TachometerMonarch Pocket Laser Tach 200

UHF Radios ............................................................................................................ 73Motorola XU2100 UHF Radio

Ultrasonic Detectors .......................................................................................... 74Fuji PortaFlow X Ultrasonic Flow MeterUE Systems UltraProbe 100 Ultrasonic Leak DetectorUE Systems Ultraprobe 15,000 TouchUE Systems UWC-15 Ultrasonic Wave Form Concentrator (Parabolic Dish)

Vibration Meters .................................................................................................. 75Fluke 810 Vibration TesterRion VM-82 Vibration MeterSPM Vibrameter VIB-11 Vibration Meter

INSULATION & GROUND TEST EQUIPMENT

Clamp On Ground Test Equipment ...............................................................78AEMC 2610 Ground Fault / Leakage DetectorAEMC 3711 Clamp On Ground Resistance Test SetAEMC 3731 Clamp On Ground Resistance Test SetAEMC 6416 Clamp On Ground Resistance TesterMegger DET24C Ground Resistance Tester

Ground Resistance Test Equipment .............................................................80AEMC 2610 Ground Fault / Leakage DetectorAEMC 3711 Clamp On Ground Resistance Test SetAEMC 3731 Clamp On Ground Resistance Test SetAEMC 6416 Clamp On Ground Resistance TesterBender LT3000 Line Isolation Monitor (LIM) and GFCI TesterFluke 1625 GEO Earth Ground TesterFluke 1625-2 GEO Earth Ground TesterMegger 250202 DET2/2 Digital Ground Resistance TesterMegger Battery Ground Fault LocatorMegger Battery Ground Fault TracerMegger DET24C Ground Resistance TesterMegger DET3TC Digital Ground TesterMegger DET3TD Digital Ground TesterMegger DET4TCR2 Ground Resistance Test KitMegger DET4TD Earth TesterMegger DET62D Ground Resistance Test KitMegger Professional Earth Test KitMetrel 2088 Ground TesterOhmic BET-300AD Equipotential Test SetOmicron CP CU1 Multifunctional Coupling Unit for the CPC 100

Insulation Resistance (Megohmmeters) Test Equipment ....................85AEMC 1026 1kV Digital MegohmmeterAEMC 5060 5kV MegohmmeterAmprobe DM-III Multitest Power Quality RecorderFluke 1587/MDT FC Advanced Motor and Drive Troubleshooting KitMegger 210415 15kV Analog MegohmmeterMegger BM15 Analog 5kV Insulation Resistance TesterMegger MIT40X Industrial Insulation TesterMegger MIT410 Industrial Insulation TesterMegger MIT430-TC2 Insulation Resistance and Continuity TesterMegger MIT485 Industrial Insulation Tester Megger MIT520/2 5kV Insulation Resistance TesterMegger MIT525 5kV Insulation Resistance Tester


Insulation Resistance (Megohmmeters) Test Equipment (cont.) ....... 88Megger MIT1025 10kV Insulation Resistance TesterMegger MIT1525 15kV Insulation Resistance TesterMegger S1-554 5kV Insulation Resistance TesterMetrel 2077 5kV Insulation Resistance TesterMetrel 3103 1kV Insulation Resistance TesterMetrel 3200 TeraOhm 10kV Insulation Resistance Tester

METERS & METER TEST EQUIPMENT

Capacitance & Inductance Test Equipment .............................................. 92ABB CB-2000 Portable Capacitance MeterB&K Precision 885 High Accuracy Handheld LCR/ESR MeterOmicron CP TD1 Capacitance/Dissipation Factor Testing Device (Tan Delta)Omicron CPC 100 Multi-Functional Primary Test SystemPowerComm PCA-4125 Power Communications AnalyzerSencore LC53 Capacitance and Inductance Meter

Current Meters .....................................................................................................94Arbiter 928A Power System MultimeterFluke 336 Clamp MeterFluke 337 Clamp MeterHD Electric HVA-2000 High Voltage Digital Ammeter

Multimeters ........................................................................................................... 95Arbiter 928A Power System MultimeterFluke 33 1000A AC/DC Clamp On AmmeterFluke 87 Industrial MultimeterFluke 87-III True RMS MultimeterFluke 87-V True RMS MultimeterFluke 287 True-RMS Electronics Logging MultimeterFluke 322 Clamp MeterFluke 787 ProcessMeterFluke 789 ProcessMeterFluke 1587 Insulation MultimeterHipotronics KV100A 100kV AC / DC Kilovolt MeterMegger PMM-1 Power Multimeter


Multimeters (cont.) ..............................................................................................98PowerComm PCA-4125 Power Communications AnalyzerTri State TSW-22 10:1, 5kV High Voltage Divider

Watthour Meters ..................................................................................................99General Electric IB-9 Watthour MeterGeneral Electric IB-10 Watthour MeterRadian Research RB-10 Bantam Lite Portable Test Kit Radian Research RM-DS/s Meter Disk SensorScientific Columbia SC10 (220-1) Watthour Standard

MOTOR & ROTATING APPARATUS TEST EQUIPMENT

Megohmmeters ...................................................................................................104AEMC 1026 1kV Digital MegohmmeterAEMC 5060 5kV MegohmmeterAmprobe DM-III Multitest Power Quality RecorderFluke 1587/MDT FC Advanced Motor and Drive Troubleshooting KitMegger 210415 15kV Analog MegohmmeterMegger BM15 Analog 5kV Insulation Resistance TesterMegger MIT40X Industrial Insulation TesterMegger MIT410 Industrial Insulation TesterMegger MIT430-TC2 Insulation Resistance and Continuity TesterMegger MIT485 Industrial Insulation TesterMegger MIT520/2 5kV Insulation Resistance TesterMegger MIT525 5kV Insulation Resistance TesterMegger MIT1025 10kV Insulation Resistance TesterMegger MIT1525 15kV Insulation Resistance TesterMegger S1-554 5kV Insulation Resistance TesterMetrel 2077 5kV Insulation Resistance TesterMetrel 3103 1kV Insulation Resistance TesterMetrel 3200 TeraOhm 10kV Insulation Resistance Tester

Motor Analyzers .................................................................................................. 109PdMA MCE 5kV Electric Motor AnalyzerPdMA MCE Max 5kV Motor Circuit Evaluation Analyzer

MOTOR & ROTATING APPARATUS TEST EQUIPMENT

Phase Sequence & Motor Rotation Test Equipment.............................. 110Amprobe PRM-1 Phase Sequence IndicatorFluke 1587/MDT FC Advanced Motor and Drive Troubleshooting KitPdMA MCE 5kV Electric Motor AnalyzerPdMA MCE Max 5kV Motor Circuit Evaluation AnalyzerTri State TSW-45 5kV Phase Sequence Indicator

Power Factor Test Equipment ........................................................................112Doble M4000 M4100 Power Factor Insulation AnalyzerDoble M4110 Leakage Reactance ModuleDoble M4140 Capacitor Bank Test KitDoble Type C 10kV Resonating InductorMegger CB-100 28V Power Factor Test SetMegger Delta-2000 Power Factor Test SetMegger DELTA-3000 10 kV Automated Insulation Power Factor Test SetMegger DELTA4000 Series 12 kV Insulation Diagnostic SystemMegger DELTA4310 12kV Insulation Diagnostic SystemMegger IDAX300 Insulation Diagnostic AnalyzerOmicron CP TD1 Capacitance/Dissipation Factor Testing Device (Tan Delta)Omicron CPC 100 Multi-Functional Primary Test System

Surge Test Equipment .......................................................................................115Baker ST112A 12kV Surge TesterBaker ST124R 24kV Surge TesterSKF (Baker) 12kV Static Motor Analyzer AWA-IV/12

POWER ANALYSIS & DATA ACQUISITION TEST EQUIPMENT

Chart Recorders .................................................................................................. 118Astro-Med Dash 18 18-Channel Chart RecorderAstro-Med TMX-18 High-Speed Data Acquisition System

Current Probes .................................................................................................... 119AEMC 275HVD Non-Contact Voltage DetectorAEMC MN103 10A Rigid Current ProbeAEMC MR521 1000AC, 1500 DC, Rigid AC/DC Current ProbeAEMC SL201 AC/DC Current Probe


Current Probes (cont.) ......................................................................................120Amprobe A-1000 AC/DC Clamp On TransducerAmprobe ACF-3000DM-A Flexible Current TransducerDranetz 300A - 3000A Flexible Current ProbesDranetz RR3035A-24 Flexible Current ProbeDranetz RR3035A-36 Flexible Current ProbeDranetz TR-2023 3000A Current TransformerDranetz TR-2510 10A Rigid Current ProbeFluke 3005 5A Current ProbeFluke 3014 40A Current ProbeFluke 3310 5000A Flex Current Probe Fluke 80K-6 High Voltage ProbeFluke 80T-IR Infrared Temperature ProbeFluke HV231-10 28kV AC High Voltage ProbeFluke i1010 AC/DC Current ClampFluke i2000 Flex AC Current ClampFluke i410 AC/DC Current ClampHastings 6799 Hot Stick TesterReliable Power Meter (Fluke) 3014 40A Current Transformer (CT)RxMS 3,000A RopeRxMS 10,000A Gen2 RopeRxMS AC Current Probe 10A Clamp-On 0.75” DiameterRxMS AC Current Probe 200A Clamp-On 0.75” DiameterRxMS 2000A 2” ID ProbeRxMS 4000A 4.5x2.5 ID ProbeRxMS Wireless Battery Dc ProbeRxMS Wireless Communications DeviceRxMS Wireless DCx 10 Channel ProbeRxMS Wireless Temperature and Humidity ProbeSummit Technology 5KVP High Voltage Probe SetSummit Technology 15KVP 15k Voltage Probe Set with Hot Sticks

Data Acquisition Test Equipment .................................................................128AEMC L230 AC Voltage Simple LoggerAllen-Bradley 193-DNCT DeviceNet Configuration TerminalFluke 2645 NetDAQ Data Acquisition UnitFluke 2686 Data Acquisition SystemFluke 2686A Data Acquisition System


Oscilloscopes .......................................................................................................130Fluke 123 ScopeMeterFluke 190-204/S ScopeMeter Test ToolFluke 192 ScopeMeterFluke 196 ScopeMeterLarkin Power Components Power Semiconductor Tester - Model M3KPowerComm PCA-4125 Power Communications Analyzer

Phase Angle Meters ........................................................................................... 132Bierer PD800W Cordless Phasing TesterDranetz 314 Phase Angle MeterHD Electric Double Vision Dual Display Wireless VoltageIndicating Phaser - DDVIP-40SMC PME-20-PH Phase Angle Meter

Power Quality Test & Power Recorder Equipment.................................133AEMC PEL 105 Power and Energy LoggerAmprobe DM-II Pro Data Logger RecorderAmprobe DM-III Multitest Power Quality RecorderBaker ST112A 12kV Surge TesterBaker ST124R 24kV Surge TesterDent ELITEpro Data LoggerDran-View Enterprise Software KeyDran-View Hasp KeyDranetz HDPQ Xplorer Power Quality AnalyzerDranetz PowerXplorer PX5 Power MonitorDranetz PPA-PP1R-115 Phase Power AdapterFluke 43B Single Phase Power Quality AnalyzerFluke 434 Energy AnalyzerFluke 435 Power Quality Energy AnalyzerFluke 1735 Three-Phase Power Quality LoggerFluke 1750 Three Phase Power RecorderFluke T5-1000 Voltage, Continuity and Current TesterHioki 3196 Power Quality AnalyzerHioki PW3198 Power Quality AnalyzerMegger Power DB Hardware KeyMegger MIT430-TC2 Insulation Resistance and Continuity TesterPowerSight PS3550 Power & Energy AnalyzerRxMS Cx Monitor


Solar Monitoring Equipment ..........................................................................139Hukseflux I-V400 Peak Performance Analyzer

PROCESS INSTRUMENTATION & CONTROLS TEST EQUIPMENT

Barometers ...........................................................................................................142Druck DPI 740 Precision Barometer

Decade Box ...........................................................................................................143AEMC BR07 Decade BoxGeneral Resistance DA-RTD-200 Decade BoxPrime Technology RTD-100 SimulatorTranscat 7010T RTD Simulator

Hand Pumps ........................................................................................................ 144Ametek T-620 3000 PSI Hydraulic Hand PumpAmetek T-740 200 PSI Pneumatic Hand PumpBeamex PGM 300 PSI Hand PumpGE SI Pressure HTP1 10000 PSI Hydraulic Hand PumpGE SI Pressure TP1-40 - 600 PSI Pneumatic Hand PumpKNF N726 Motorized Vacuum PumpRalston APGO 300 PSI Pneumatic Hand PumpRalston DPPV Low Pressure and Vacuum Hand PumpRalston XHGV 5000 PSI Hydraulic Hand PumpTranscat 23622P 600 PSI Transmation Pneumatic Hand PumpTranscat 6215P 150 PSI Pressure PumpTransmation 2000PV Universal Hand PumpTransmation 4238P 600mm Vacuum Pump

Megohmmeters .................................................................................................. 148AEMC 1026 1kV Digital MegohmmeterAEMC 5060 5kV MegohmmeterAmprobe DM-III Multitest Power Quality RecorderFluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit


Megohmmeters (cont.) .................................................................................... 149Megger 210415 15kV AnalogMegohmmeterMegger BM15 Analog 5kV Insulation Resistance TesterMegger MIT40X Industrial Insulation TesterMegger MIT410 Industrial Insulation TesterMegger MIT430-TC2 Insulation Resistance and Continuity TesterMegger MIT485 Industrial Insulation TesterMegger MIT520/2 5kV Insulation Resistance TesterMegger MIT525 5kV Insulation Resistance TesterMegger MIT1025 10kV Insulation Resistance TesterMegger MIT1525 15kV Insulation Resistance TesterMegger S1-554 5kV Insulation Resistance TesterMetrel 2077 5kV Insulation Resistance TesterMetrel 3103 1kV Insulation Resistance TesterMetrel 3200 TeraOhm 10kV Insulation Resistance Tester

Multifunction & Process Calibrators ........................................................... 154Altek 211 RTD CalibratorAltek 234 Signal AnalyzerAltek 334 Loop CalibratorAltek 422 Universal Thermocouple CalibratorAltek 941 Multi-Frequency CalibratorAltek TechChek 820 Process CalibratorBacharach 125 Fyrite Pro Combustion Gas AnalyzerBently Nevada TK3-2 Calibration InstrumentBiosystems Multivision Gas DetectorDruck DPI 600 300 PSI Pressure CalibratorDruck UPS-II Loop CalibratorDwyer 1221 Slack Tube ManometerExtech 407117 Heavy Duty Mini Metal Vane AnemometerExtech 407736 Sound Level MeterExtech 407764 Sound Level MeterFluke 707 Loop CalibratorFluke 718-100G Pressure CalibratorFluke 725 Multifunction Process CalibratorFluke 743B Documenting Process CalibratorFluke 744 Documenting Process Calibrator Fluke 754 Documenting Process CalibratorFluke 787 ProcessMeterFluke 789 ProcessMeter


Multifunction & Process Calibrators (cont.) .............................................. 161Fluke 922 Airflow Meter / MicromanometerGow-Mac 21-070 Gas Leak DetectorHoneywell GasAlertMicro Gas DetectorLeader LFG-1300S Function GeneratorMartel MC-1000 Multifunction Process CalibratorMeriam D1000IW Precision ManometerMeriam DP200I Portable Digital Manometer / CalibratorPIE 531 Loop CalibratorQualitrol KIT-013-1 Field Test KitRKI GX-2001 Portable Gas Meter (LEL, 02, CO, H2S)TESCOM (Emerson) 44-100 Pressure RegulatorTranscat 4363T RTD CalibratorTransmation 92 36 PSI Digital Pressure CalibratorUniversal Services GLI-01 Proximity Sensor Calibrator

Power Supplies ....................................................................................................165Adwel TPS-1 Three Phase Power SourceAgilent N5750A DC Power SupplyBK Precision 1601 Regulated DC Power SupplyEaton Cutler Hammer Power Supply for Digitrip Test SetsETI AD-1 Portable AC DC Power SupplyETI AD-2 AC DC Variable Power SupplyKeysight Technologies N5750 DC Power SupplyMagna PS-12/480 AC/DC Power SupplyStaco 1520-3 480V, 3 Phase, 9A Variable TransformerTranscat 21052E Portable Loop Power SupplyTranscat 23232E 3A, 34V DC Power SupplyVanguard UPS-S2 300V DC, 240V AC 10A Power Supply

Pressure Modules & Gauges .......................................................................... 168Ashcroft 1082A 0-30 PSI Test GaugeAshcroft 1082A 3-15 PSI Test GaugeAshcroft 1082A 3-60 PSI Test GaugeAshcroft 1082A 3-200 PSI Test GaugeAshcroft 1082A 3-600 PSI Test GaugeAshcroft 1082A 4.5-1500 PSI Test GaugeAshcroft 1082A 4.5-5000 PSI Test GaugeAshcroft 1082A 4-10K PSI Test Gauge


Pressure Modules & Gauges (cont.) .............................................................170Crystal XP2I 100 PSI Pressure GaugeCrystal XP2I 500 PSI Pressure GaugeCrystal XP2I 5,000 PSI Pressure GaugeCrystal XP2I 3,000 PSI Presssure GaugeFluke 700P00 1 H20 Pressure ModuleFluke 700P01 10 H20 Pressure ModuleFluke 700P02 1 PSI Pressure ModuleFluke 700P03 5 PSI Pressure ModuleFluke 700P04 15 PSI Pressure ModuleFluke 700P05 30 PSI Pressure ModuleFluke 700P06 100 PSI Pressure Module Fluke 700P07 500 PSI Pressure ModuleFluke 700P08 1,000 PSI Pressure ModuleFluke 700P22 1 PSI Pressure ModuleFluke 700P23 5 PSI Pressure ModuleFluke 700P24 15 PSI Pressure ModuleFluke 700P27 300 PSI Pressure ModuleFluke 700P29 3,000 PSI Pressure ModuleFluke 700P31 10,000 PSI Pressure ModuleFluke 700PA5 30 PSI Pressure ModuleFluke 700PA6 100 PSI Pressure ModuleFluke 700PD2 1 PSI Pressure ModuleFluke 700PD3 5 PSI Pressure ModuleFluke 700PD4 15 PSI Pressure ModuleFluke 700PD5 30 PSI Pressure ModuleFluke 700PD6 100 PSI Pressure ModuleFluke 700PD7 200 PSI Pressure ModuleFluke 700PV4 15 PSI Pressure ModuleFluke 750P27 300 PSI Pressure ModuleMartel PI-10K 10,000 PSI Pressure GaugeRosemount 1151 1 H20 Pressure TransmitterTESCOM (Emerson) 44-100 10,000 PSI Pressure RegulatorTranscat 23300P-15 15 PSI Digital Pressure GaugeTranscat 23300P-30 30 PSI Digital Pressure GaugeTranscat 23300P-50 50 PSI Digital Pressure GaugeTranscat 23300P-100 100 PSI Digital Pressure GaugeTranscat 23300P-200 200 PSI Digital Pressure GaugeTranscat 23300P-500 500 PSI Digital Pressure GaugeTranscat 23300P-750 750 PSI Digital Pressure GaugeTranscat 23300P-1000 1,000 PSI Test Gauge


Pressure Modules & Gauges (cont.) ............................................................ 180Transmation PD1121 5 PSID Pressure ModuleUEI Static Pressure Test KitUSG 3-30 3”, 30 PSIG Test GaugeUSG 3-200 3”, 200 PSIG Test GaugeUSG 3-300 3”, 300 PSIG Test GaugeUSG 3-1000 3”, 3000 PSIG Test GaugeUSG 3-3000 3”, 3,000 PSIG Test Gauge

SF6 Gas Test Equipment ..................................................................................182DILO 3-027-R002 SF6 Percentage Analyzing DeviceDILO 3-033-R002 SF6 Gas Leak DetectorDILO 3-033-R050 SF6 IR-Leak DetectorDILO 3-033-R200 SF6-LeakSpyDILO 3-037-R050 Moisture AnalyzerDILO 3-038-R032 SF6 Multi-AnalyzerDILO 3-038R-R303 Zero Emission SF6 AnalyzerDILO D-155-R016 SF6 Service HoseDILO SF6 Analyzer Adapter KitDILO SF6 Cylinder Heating Blanket HB 120AION LCP-1-P HS SF6 Gas DetectorWIKA GA10 SF6 Breaker AnalyzerWIKA GA20 SF6 Moisture-Humiditor Analyzer

Smart Communicators .................................................................................... 186Hart Scientific (Fluke) 275 Smart CommunicatorHart Scientific (Fluke) 375 Smart CommunicatorHart Scientific (Fluke) 375 FB Smart Communicator Field Bus EnabledHoneywell STS103 CommunicatorRelcom FBT-6 Foundation Fieldbus Monitor

Temperature Test Equipment ....................................................................... 188Ametek CTC-650A Compact Dry Block Temperature CalibratorAmetek Jofra CTC Compact Temperature CalibratorDickson SP100 Temperature and Humidity Data LoggerFluke 9140 Dry Well CalibratorHart Scientific (Fluke) 9100S-A Dry-Well CalibratorHart Scientific (Fluke) 9102S Dry-Well Calibrator Hart Scientific (Fluke) 9140-A Dry-Well Calibrator Hart Scientific (Fluke) 9141-A Dry-Well Calibrator


Temperature Test Equipment (cont.) ......................................................... 190Vaisala HM34 Temperature / Relative Humidity Meter

RELAY & PROTECTIVE TEST EQUIPMENT

Controllers............................................................................................................ 194Doble Universal Controller

Shunts.................................................................................................................... 194Empro Shunts B-1000-50 1000A 50Mv Shunt

Single Phase Relay Test Equipment ............................................................195Doble F2253 Single Phase Relay Test SetDoble F2500 Single Phase Relay Test SetDoble F2700 High Quality Relay Test SetISA T-1000 Single Phase Relay Test Set Megger SMRT1 Single-Phase Relay Test SystemMegger SR-98 Single Phase Relay Test Set

Testing Automation Software ........................................................................196Enoserv RTS Relay Dongle Key

Three Phase Relay Test Equipment .............................................................197Doble F6051 Time SynchronizerDoble F6150 Relay Testing SystemDoble F6150e Relay Testing SystemDoble F6150SV Relay Testing SystemDoble F6150sv Relay Testing System (F6860 IEC61850 GSE Interface Module)Manta MTS-5000 Protective Relay Test SystemManta MTS-5100 Protective Relay Test SystemMegger MPRT8430 Three Phase Protective Relay Test SystemMegger MPRT8445 Three Phase Protective Relay Test SystemMegger PULSAR Universal Protective Relay Test SystemMegger SMRT36 Three-Phase Protective Relay Test SystemMegger SMRT410 Multi-phase Relay Tester


Three Phase Relay Test Equipment (cont.) ............................................. 200Omicron CMC 356 Universal Relay Test Set and Commissioning ToolSMC Mentor 12 Three Phase Relay Test Set

SWITCHGEAR, CIRCUIT BREAKER & RECLOSER TEST EQUIPMENT

Cable Fault Locating Test Equipment ...................................................... 204Amprobe AT-2000 Advanced Wire TracerAmprobe AT-2005 Wire TracerAmprobe AT-2005-A Industrial Multipurpose TracerAmprobe AT-3000 Underground Cable LocatorAmprobe AT-7020 Advanced Wire Tracer KitAmprobe AT-7030 Advanced Wire TracerAquatronics EG 3000 Secondary Cable Fault Locator

Circuit Breaker Timing and Motion Analyzers ........................................206ABB Ekip Connect Secondary Injection Test SetDoble TDR900 Circuit Breaker Test SystemDoble TDR9000 Circuit Breaker Test SystemDoble TDR9100 Circuit Breaker Test SystemDoble TR3100 Circuit Breaker Timer / AnalyzerDoble TR3190 Linear and Rotary TransducerFuji FLD22 TransducerOmicron CIBANO 500 Circuit Breaker Test SystemSiemens Breaker Data Adapter Plus (BDA Plus)Vanguard CT-6500 Circuit Breaker Timer / AnalyzerVanguard CT-6500-6 6 Channel Circuit Breaker Timer / AnalyzerVanguard CT-7000 Digital Circuit Breaker AnalyzerVanguard CT-7500 S2 Circuit Breaker Timer / AnalyzerVanguard DIGITMR Circuit Breaker Timer / AnalyzerVanguard Doble Transducer Adapter 9084-UCVanguard RT-2 Rotary TransducerVanguard RT-1 Rotary Transducer with Magnetic MountVanguard TR-1 25" Linear TransducerVanguard TR-2 10" Linear TransducerVanguard TR-HMA ABB AHMA-8 TransducerVanguard TR-HMB ABB HMB Transducer


Dewpoint Analyzers ..........................................................................................212Cosa XPDM Portable Dew Point MeterVaisala DM70 Dewpoint Analyzer

Low Resistance Ohmmeters ......................................................................... 214AEMC 5600 10A Digital Micro-Ohmmeter with Kelvin ProbesAEMC 6240 10A Micro-OhmmeterAEMC 6250 10A Micro-OhmmeterAEMC 6290 200A Micro-OhmmeterMegger MOM2 200A MicrohmmeterMegger 247001 10A Digital Low Resistance OhmmeterMegger DLRO600 600A Digital MicrohmmeterMegger DLRO10HD 10A Digital Low Resistance Ohmmeter Megger DLRO200-115 200A Digital Low Resistance OhmmeterMegger DLRO10 10A Digital Low Resistance OhmmeterOmicron CIBANO 500 Circuit Breaker Test System Raytech Micro Centurion II MC2 200A Precision Micro Ohm MeterRaytech Micro Junior 10A Precision Micro Ohm MeterRaytech Micro Junior 2 10A Precision Micro Ohm MeterVanguard Auto-Ohm 100 100A Micro-Ohmmeter Vanguard Auto-Ohm-200 S3 200A Micro-Ohmmeter

Megohmmeters .................................................................................................. 218AEMC 1026 1kV Digital MegohmmeterAEMC 5060 5kV MegohmmeterAmprobe DM-III Multitest Power Quality RecorderFluke 1587/MDT FC Advanced Motor and Drive Troubleshooting KitMegger 210415 15kV Analog MegohmmeterMegger BM15 Analog 5kV Insulation Resistance TesterMegger MIT40X Industrial Insulation TesterMegger MIT410 Industrial Insulation TesterMegger MIT430-TC2 Insulation Resistance and Continuity TesterMegger MIT485 Industrial Insulation TesterMegger MIT520/2 5kV Insulation Resistance TesterMegger MIT525 5kV Insulation Resistance TesterMegger MIT1025 10kV Insulation Resistance TesterMegger MIT1525 15kV Insulation Resistance TesterMegger S1-554 5kV Insulation Resistance TesterMetrel 2077 5kV Insulation Resistance Tester


Megohmmeters (cont.) .................................................................................... 222Metrel 3103 1kV Insulation Resistance Tester Metrel 3200 TeraOhm 10kV Insulation Resistance Tester

Primary Current Injection Test Equipment ..............................................226ETI Circuit Breaker Test Stabs SystemETI PI-800 Portable Circuit Breaker Test SetETI PI-1600B High Current Test SetETI PI-4000 High Current Test SetETI PI-5000 High Current Test SetETI PI-6000 Primary Circuit Breaker Test SetMegger CB-360-DC/CB-120-DC DC Circuit Breaker Test SetsMegger CB-832 High Current Test SetMegger CB-845 High Current Test SetMegger DDA-1600 Circuit Breaker TesterMegger DDA-6000 Universal Circuit Breaker Test SetMegger MS-2 Circuit Breaker and Overload Relay Test SetMegger MS-2A Circuit Breaker and Overcurrent Relay TesterMegger ODEN AT Primary Current Injection Test SystemMulti-Amp MS-1 Overload Relay and Circuit Breaker Test SetMulti-Amp (Megger) MS-2 Circuit Breaker Test SetOmicron CP CB2 Accessory to the CPC 100 for Current Requirements Up to 2000 AOmicron CPC 100 Multi-Functional Primary Test SystemPhenix HC-1 High Current Test SetVanguard MCCB-250 Circuit Breaker Tester

Recloser Control Test Equipment ................................................................ 232Cooper Power Systems Type METElectronic Recloser Control TesterOmicron RCP1 19-Pin Recloser Control Cable PackageOmicron RST1 14-Pin Recloser Control Cable PackageOmicron RVT1 32-Pin Recloser Control Cable PackageZensol Recloser Control Analyzer - GEN-6

Secondary Current Injection Test Equipment ........................................236ABB 504 Secondary Injection Test SetABB 505 Secondary Injection Test SetABB 606 Secondary Injection Test SetABB 607 Secondary Injection Test Set


Secondary Current Injection Test Equipment (cont.) ........................... 237ABB BTSB Secondary Injection Test SetABB Ekip Connect Secondary Injection Test SetABB PR010/T Secondary Injection Test SetABB TS3 Trip Unit Test SetAllen-Bradley 140G-ELTT Trip Test UnitCarriere STS100 Secondary Injection Test SetEaton Cutler Hammer 1232C50G05 Secondary Injection Test KitEaton Cutler Hammer 1232C50G10 Secondary Injection Test KitEaton Cutler Hammer 1287C56G02 Secondary Injection Seltronic Test KitEaton Cutler Hammer 140D481G02 Secondary Injection Test SetEaton Cutler Hammer 140D481G03 Secondary Injection Test SetEaton Cutler Hammer 70C1056 Functional Test KitEaton Cutler Hammer 70C1056G52 Circuit Breaker Test SetEaton Cutler Hammer 70C1056G54 Circuit Breaker Test SetEaton Cutler Hammer 7801C57 OPTIMizer Programmer / Trip TestEaton Cutler Hammer 8779C02G03 DS / DS II AdaptorEaton Cutler Hammer 8779C02G04 Magnum AdaptorEaton Cutler Hammer MTK1000 Magnum Trip Unit Test KitEaton Cutler Hammer MTK2000 Magnum Trip Unit Test KitEaton Cutler Hammer Power Supply Module (PRTAAPM)Eaton Cutler Hammer SPBPTK Secondary Injection Test SetFEDERAL PIONEER DDT-USRC Field Test UnitGE EntelliGuard GTUTK20 Digital Test KitGE M-PRO Test BoxGeneral Electric DEH-233 Entellisys System Test KitGeneral Electric PST1-1 Secondary Injection Test SetGeneral Electric TAKTS2 Secondary Injection Test SetGeneral Electric TVRMS2 Secondary Injection Test SetGeneral Electric TVTS1 Secondary Injection Test SetGeneral Electric TTS-1 VersaTrip Circuit Breaker Test SetMadTest Instruments DSM4i1 AdapterMerlin Gerin 685836A Secondary Injection Test SetMerlin Gerin ME Test Kit Secondary Injection Test SetSatin American ETC-PTS Secondary Injection Test SetSiemens Breaker Data Adapter Plus (BDA Plus)Siemens ELTPHB VL Portable Test KitSiemens PTS-3 Secondary Injection Test SetSiemens PTS-4 Secondary Injection Test SetSiemens PTS-5 Secondary Injection Test Set


Secondary Current Injection Test Equipment (cont.) ...........................247Siemens SBAPM Auxiliary Power Module for SB BreakersSiemens TS-31 Secondary Injection Test SetSiemens Westrip Amptector Adapter PlugSiemens WLTS Secondary Injection Test SetSquare D by Schneider 55391 ME Test KitSquare D by Schneider CBTMB Adapter for UTS3 Universal Test SetSquare D by Schneider CBTM1 Module for UTS3 Universal Test SetSquare D by Schneider CBTM3 Module for UTS3 Universal Test SetSquare D by Schneider TRV00910 UTA Test SetUtility Relay Co. B-290 Secondary Injection Test SetUtility Relay Co. B-291-MP Secondary Injection Test SetUtility Relay Co. B-291-S Secondary Injection Test SetUtility Relay Co. B-292 Secondary Injection Test SetWestinghouse 1255C48G02 Secondary Injection Test SetWestinghouse SPBPTK Secondary Injection Test Set

SF6 Gas Test Equipment .................................................................................254

DILO 3-027-R002 SF6 Percentage Analyzing DeviceDILO 3-033-R002 SF6 Gas Leak DetectorDILO 3-033-R050 SF6 IR-Leak DetectorDILO 3-033-R200 SF6-LeakSpyDILO 3-037-R050 Moisture AnalyzerDILO 3-038-R032 SF6 Multi-AnalyzerDILO 3-038R-R303 Zero Emission SF6 AnalyzerDILO D-155-R016 SF6 Service HoseDILO SF6 Analyzer Adapter KitDILO SF6 Cylinder Heating Blanket HB 120AION LCP-1-P HS SF6 Gas DetectorWIKA GA10 SF6 Breaker AnalyzerWIKA GA20 SF6 Moisture-Humiditor Analyzer

Vacuum Bottle Test Equipment ...................................................................258Vanguard VBT-60 Vacuum Bottle TesterVanguard VBT-80 Vacuum Bottle TesterVacuum Interrupters MAC-TS4 Magnetron Atmospheric Condition (MAC) Analysis Test SetVacuum Interrupters PowerVAC V1 Rigid Magnetic Coil

TRANSFORMER, MOTOR & GENERATORN DIAGNOSTIC

CT & PT Test Equipment ..................................................................................262Adwel CTX-2000 1200V CT Test SetMegger CTER-91 Current Transformer Excitation, Ratio and Polarity TesterMegger MRCT Relay and Current Transformer TesterMegger MRCT-VT Relay and Current Transformer TesterOmicron CT AnalyzerOmicron CT SB2 Switch Box for CT AnalyzerRaytech CT-T1 Current Transformer (CT) TesterVanguard EZCT Automatic CT Test SetVanguard EZCT-10 Automatic CT Test SetVanguard EZCT-2000 Automated CT Test SetVanguard EZCT-2000A Automated CT Test SetVanguard EZCT-2000B Automated CT Test SetVanguard EZCT-2000C Plus Automated CT Test Set

Capacitance & Inductance Test Equipment ............................................266Omicron CP TD1 Capacitance/Dissipation Factor Testing Device (Tan Delta)Omicron CPC 100 Multi-functional Primary Test System

Dielectric Frequency Response ...................................................................267Megger IDAX300 Insulation Diagnostic Analyzer

Electromagnetic Core Imperfection Detection Test Equipment (ElCID) ................................................................................................................. 268

IRIS Power Electromagnetic Core Imperfection Detection Test Set - EL CID Evolution

Ground Cluster & Safety Test Equipment .................................................269HD Electric AT-100 Arrester and Leakage TesterSalisbury Custom Ground Cluster Cable

Oil Dielectric Test Equipment .......................................................................270Doble OTC Oil Test CellHigh Voltage DTS-60A Oil Dielectric AC Test SetHigh Voltage DTS-60D Oil Dielectric Test SetHigh Voltage DTS-100D Oil Dielectric AC Test SetHipotronics OC60D Digital Liquid Dielectric Testing EquipmentHV Diagnostics BA-75 Portable Breakdown Analyzer for Oil TestingMegger OTS-60PB 60kV Oil Dielectric Test SetMegger OTS-60SX 60kV Oil Dielectric Test Set

TRANSFORMER, MOTOR & GENERATOR DIAGNOSTIC

Phase Sequence & Motor Rotation Test Equipment............................. 272Amprobe PRM-1 Phase Sequence IndicatorFluke 1587/MDT FC Advanced Motor and Drive Troubleshooting KitPdMA MCE 5kV Electric Motor AnalyzerPdMA MCE Max 5kV Motor Circuit Evaluation AnalyzerTri State TSW-45 5kV Phase Sequence Indicator

Power Factor Test Equipment ......................................................................274Doble M4000 M4100 Power Factor Insulation AnalyzerDoble M4110 Leakage Reactance ModuleDoble M4140 Capacitor Bank Test KitDoble Type C 10kV Resonating InductorMegger CB-100 28V Power Factor Test SetMegger Delta-2000 Power Factor Test SetMegger DELTA-3000 10 kV Automated Insulation Power Factor Test SetMegger DELTA4000 Series 12 kV Insulation Diagnostic SystemMegger DELTA4310 12kV Insulation Diagnostic SystemMegger IDAX300 Insulation Diagnostic AnalyzerOmicron CP TD1 Capacitance/Dissipation Factor Testing Device (Tan Delta)Omicron CPC 100 Multi-Functional Primary Test System

SF6 Gas Test Equipment .................................................................................277DILO 3-027-R002 SF6 Percentage Analyzing DeviceDILO 3-033-R002 SF6 Gas Leak DetectorDILO 3-033-R050 SF6 IR-Leak DetectorDILO 3-033-R200 SF6-LeakSpyDILO 3-037-R050 Moisture AnalyzerDILO 3-038-R032 SF6 Multi-AnalyzerDILO 3-038R-R303 Zero Emission SF6 AnalyzerDILO D-155-R016 SF6 Service HoseDILO SF6 Analyzer Adapter KitDILO SF6 Cylinder Heating Blanket HB 120AION LCP-1-P HS SF6 Gas DetectorWIKA GA10 SF6 Breaker AnalyzerWIKA GA20 SF6 Moisture-Humiditor Analyzer

Surge Test Equipment ......................................................................................281Baker ST112A 12kV Surge TesterBaker ST124R 24kV Surge TesterSKF (Baker) 12kV Static Motor Analyzer AWA-IV/12

TRANSFORMER, MOTOR & GENERATOR DIAGNOSTIC

Sweep Frequency Response (SFRA) Test Equipment .......................... 282Doble M5200 Sweep Frequency Response AnalyzerDoble M5400 Sweep Frequency Response AnalyzerIRIS Power Electromagnetic Core Imperfection Detection Test Set - EL CID EvolutionMegger Sweep Frequency Response Analyzer

Transformer Turn Ratio Test Equipment .................................................. 283AEMC DTR-8500 Digital Transformer RatiometerAEMC DTR 8510 High-Performance RatiometerDoble TTR - Transformer Turns Ratio CapacitorMegger TTR310 Three-Phase Transformer Turns Ratio Test SetMegger PFL20-1500 Power Cable Fault Locator SystemRaytech T-Rex Three Phase Voltage Extension to Turns Ratio MeterRaytech TR-1 Single Phase TTR (Transformer Turns Ratio)Raytech TR-SPY Mark II Three Phase TTR (Transformer Turns Ratio)Raytech TR-SPY Mark III Three Phase TTR (Transformer Turns Ratio)Vanguard ATRT-01 Single Phase TTRVanguard ATRT-01B Battery Powered Single Phase TTRVanguard ATRT-03 Automatic Three Phase TTRVanguard ATRT-03 S2 Automatic Three Phase TTRVanguard TRF-100 Automatic Three Phase TTRVanguard TRI-PHASE True Three Phase TTR

Winding Resistance Test Equipment ......................................................... 287Adwel DWR Winding Resistance Test SetAdwel WRT-100 Winding Resistance Test SetOmicron CP SB1 Switch Box for Fully Automatic Testing of Three-Phase Power TransformersOmicron CPC 100 Multi-Functional Primary Test SystemRaytech WR14 15 Amp Winding Resistance MeterRaytech WR50-12 Two Channel Winding Resistance Test SetRaytech WR50-13 Three Channel Winding Resistance Test SetRaytech WR50-1A 50A Winding Resistance Test SetRaytech WR50-2 Two Channel Winding Resistance Test SetVanguard LTCA-40 Load Tap Changer AnalyzerVanguard TRM-403 Transformer Resistance MeterVanguard WRM-10 Winding Resistance Test Set

This page intentionally left blank.

www.protecequip.com


www.protecequip.com

BATTERY TESTEQUIPMENT


The Megger Battery Ground Fault Locator (BGL) simplifies the tracking of ground faults on float-ing DC-powered control systems.

The Megger Battery Ground Fault Tracer (BGFT) is an economical, easy-touse instrument that identifies, traces and locates ground faults in un-grounded DC systems— on-line.

Megger Battery Ground Fault Locator

Megger Battery Ground Fault Tracer

Megger BGL

Megger BGFT

Battery Ground Fault Testers

32 protecequip.com Toll Free 844-Protec-0


Touch one button and the processor does the rest. Within seconds you have a temperature compensated accurate reading of specific gravity and temperature. The SBS-2002 Digital Battery Hydrometer measures specific gravity and tem-perature automatically via a temperature-com-pensated simple one-button test to 35°C (77°F).

SBS-2002 Battery Hydrometer

SBS-2002

Battery Hydrometers

Easily complete specific gravity testing with the SBS by simply inserting the nozzle into the battery and depressing the finger pump which draws a few drops of sulfuric acid (H2 S04 ) through the tube.

SBS-2003 Digital Hydrometer / Density Meter

SBS-2003

The Alber DMA-35-CRT Hydrometer has a meas-urement range of 0 to 3 g/cm3, resolution to 0.0001 g/cm3 and accuracy of +/- 0.001 g/cm3.

Alber DMA-35-CRT Hydrometer with Data Logging

Alber DMA-35-CRT

The portable density meter, the SBS-3500 Hy-drometer measures the density of liquids in g/cm3 or kg/m3 according to the oscillating U-tube principle.

SBS-3500 Hydrometer

SBS-3500

33protecequip.com Toll Free 844-Protec-0

Megger BITE 3 Battery Impedance Test Set


The Megger BITE 2P is a Battery Impedance Test Set used to test and trend the state-of-health of either lead-acid or NiCd cells up to 7000 Ah.

SBS IBEX-1000P Battery Impedance Test Set that offers simple, icon menu driven operation that automatically measures and stores data through contact probes, with simple data management and report generation via the SBS Exmons Pro software.

Megger BITE3 Battery Impedance Test Equip-ment determines the health of lead-acid cells up to 2000 Ah. The BITE3 measures cell impedance, an internal ohmic test, cell voltage, intercell con-nection resistance and ripple current.

Megger BITE 2P Battery Impedance Test Set

SBS IBEX-1000P Battery Impedance Test Set

Megger BITE 2P

SBS IBEX-1000P

Megger BITE 3

Battery Impedance Test Sets



The Megger Battery Voltage Monitor (BVM) is a battery voltage measurement device that is used for capacity testing of large, industrial battery banks and in conjunction with a battery load bank, such as the Megger Torkel series.

Megger Battery Voltage Monitor

Megger BVM

The Megger TORKEL 860 Battery Load Unit is used for testing the discharge capacity of standby battery systems. The Megger TORKEL 860 is used for systems ranging from 12 to 480 V, and dis-charging can proceed at up to 110 A.

Megger TORKEL 860 Battery Load Unit

Megger Torkel 860

Battery Load Unit Test Sets

This unit must be used in combination with the Megger TORKEL 860

Utilized to preform load and discharge testing on batteries of up to 500V with a maximum dis-charge current of 220A.

Megger TORKEL 950 Battery Load Unit

Megger TORKEL 950



The Alber Cellcorder CRT-400 Cell Resistance Tester is a handheld cell voltage and resistance tester that measures and records cell float volt-age, internal cell resistance, and intercell connec-tion resistance.

Alber Cellcorder CRT-400 Cell Resistance Tester

Alber CRT-400

Battery Multimeters

36 protecequip.com Toll Free 844-Protec-036 protecequip.com Toll Free 844-Protec-0protecequip.com Toll Free 844-Protec-0


The RxMS 4000A 4.5”x2.5” ID Probe is a data logging tool that is utilized to monitor multiple points in your system as well as the operating environment surrounding it.

The RxMS 2000A 2" ID Probe is a data logging tool that is utilized to monitor multiple points in your system as well as the operating environment surrounding it.

RxMS 4000A 4.5x2.5 ID Probe

RxMS 2000A 2” ID Probe

RxMS 4000A

RxMS 2000A

The RxMS Wireless Battery Dc Probe is a data logging tool that is utilized to monitor multiple points in your system as well as the operating environment surrounding it.

RxMS Wireless Battery Dc Probe

RxMS Dc Probe

Current Probes

This unit must be used in combination with the RxMS Cx Monitor



The RxMS Wireless DCx 10 Channel Probe is a data logging tool that is utilized to monitor single 600V DC, 10 Channel 60V DC, DC Current as well as Temperature & Humidity.

RxMS Wireless DCx 10 Channel Probe

RxMS DCx


37protecequip.com Toll Free 844-Protec-0 37protecequip.com Toll Free 844-Protec-0protecequip.com Toll Free 844-Protec-0


The RxMS Wireless Communications Device is a data logging tool that is utilized to monitor multi-ple points in your system as well as the operating environment surrounding it.

RxMS Wireless Communications Device

RxMS Comm Device

The RxMS Wireless Temperature and Humidity Probe is an data logging tool that is utilized to monitor multiple points in your system as well as the operating environment surrounding it.

RxMS Wireless Temperature and Humidity Probe

RxMS T/H Probe



Current Probes



The RxMS Cx Monitor is a power quality monitor adapted specifically for the needs of a commis-sioning agent. The monitor gathers all of the voltage and current data required for all of the commissioning tests as well as provide a means for also gathering wireless or DC voltage for over one hundred (100) locations.

RxMS Cx Monitor

RxMS Cx Monitor

Power Quality Monitoring


www.protecequip.com


www.protecequip.com

HIGH POTENTIALCABLE & BUS

TEST EQUIPMENT


The Adwel HVA40-10 High Voltage AC Hipot is capable of supplying 0-40 kV alternating current at a maximum current of 10 milliamperes.

• Designed to meet all ANSI A92.2 testing re-quirements for insulated work platforms, bucket trucks, and linesSuitable for testing aerial lifts and booms 60kV or 120kV AC Hipot • Four-range volt meter • Duty cycle: 4kVA continuous or 7kVA one hour on, two hours off

Adwel HVA40-10 High Voltage AC Hipot

High Voltage ALT-120/60 120kV / 60kV AC Hipot

Adwel HVA40-10

High Voltage ALT-120/60

The High Voltage PFT-103CM 10kV 3kVA AC Hipot is ideal for a variety of field and repair shop test-ing applications

High Voltage PFT-103CM 10kV 3kVA AC Hipot

High Voltage PFT-103CM

High Voltage PFT-1003CM 100kV 3kVA AC Hipot is ideal for a variety of field and repair shop testing applications.



AC Hipot Test Equipment

42 protecequip.com Toll Free 844-Protec-042 protecequip.com Toll Free 844-Protec-0


High Voltage PFT-301CM 30kV 1.5kVA AC Hipot is ideal for testing many types of substation appa-ratus, motors/generators, isophase bus, and other loads requiring an AC withstand test.

High Voltage PFT-301CM 30kV 1.5kVA AC Hipot


The High Voltage PFT-303 30kV 3kVA AC Hipot is an AC hipot tester featuring a test voltage of 30 kiloVolts with up to 100 milliAmperes output cur-rent. Its output test voltage is variable so you can configure it according to the testing standards you need.

High Voltage PFT-303 30kV 3kVA AC Hipot

High Voltage PFT-303

The High Voltage PFT-503CM 50kV 3kVA AC Hipot test set are ideal for a variety of field and repair shop testing applications.



The High Voltage PFT-652CM 65kV 2kVA AC Hipot is a Dielectric Test Set that provides continuously adjustable AC voltage.




43protecequip.com Toll Free 844-Protec-0 43protecequip.com Toll Free 844-Protec-0


The Megger 230425 0-4 kV AC and 0-5 kV DC High-Pot Tester is designed for safety and ease of operation, and readily adapt to development, maintenance or production testing.

Megger 230425 0-4 kV AC and 0-5 kV DC High-Pot Tester

Megger 230425

Hipotronics 750-2 50kV AC Hipot, a two-piece unit provides up to 2 kVA of output power. Voltage ranges: 0 to 10, 25 and 50 kV AC. Current range: 0 to 40 mA.

Hipotronics 750-2 50kV AC Hipot

Hipotronics 750-2

The Hipotronics 100HVT 100kV 5kVA AC Hipot is specifically designed for ANSI/SIA A92.2 specifica-tion procedures for testing insulating booms on work platforms and bucket trucks.

Hipotronics 100HVT 100kV 5kVA AC Hipot

Hipotronics 100HVT



The Amprobe AT-3000 Underground Cable Loca-tor for cable avoidance is made of rugged con-struction to ensure long life and reliability while the simple controls promote effective use with minimal training.

Amprobe AT-3000 Underground Ca-ble Locator

Amprobe AT-3000

The Aquatronics S.D.A.D. Acoustic Fault Detector enhances the ease and speed of fault locating with a thumper.

Aquatronics S.D.A.D. Acoustic Fault Detector

Aquatronics S.D.A.D.

The Fault Wizard Portable Fault Location System is a truly portable, and user-friendly 10kV fault location system for primary underground cable.

Fault Wizard Portable Fault Location System

Fault Wizard


The Aquatronics EG 3000 Secondary Cable Fault Locator is a secondary cable fault / sheath fault locator, employing the most effective fault loca-tion electronics, plus many additional features for safety and operational convenience.

Aquatronics EG 3000 Secondary Ca-ble Fault Locator

Aquatronics EG 3000

Cable Fault Locating Test Equipment



The Megger PFL40A Power Cable Fault Locator System is a high energy cable fault locating sys-tem offering up to 40kV of output voltage.

With additional features like three output taps and remote radar, the High Voltage CDS-2010B 20kV Thumper will give you enough power to get the job done all without compromising safety and insulation integrity.

Megger PFL40A Power Cable FaultLocator System

High Voltage CDS-2010B 20kVThumper

Megger PFL40A

High Voltage CDS-2010B Thumper

The Megger PFL22M1500 Cable Fault Locator System provides a safe, efficient and easy-to-use solution for quickly identifying, prelocating and pinpointing various types of cable faults over a wide variety of power cables up to 20kV.

Megger PFL22M1500 Power Cable Fault Locator System

Megger PFL22M1500

The Fluke Fiber Optic Meter (FOM) is used to test and maintain fiber optic cables.

Fluke FOM Fiber Optic Meter

Fluke FOM



The TIF 300 HV Tic Tracer Voltage Detector by Amprobe is an advanced tic tracer with the ability to check high voltage transformers, high-voltage power transmission lines, and other high voltage distribution equipment.

TIF 300HV Tic Tracer

TIF 300HV


The UEI CLM100 Cable Length Meter benefits both contractors and distributors by measuring cable length on the spool or already installed.

UEI CLM100 Cable Length Meter

UEI CLM100

A portable cable fault location and high voltage test system designed to provide quick, effective, accurate and safe fault location for 10 kV cables, thereby reducing system outages and minutes lost.

Megger SG32-1500M Power Cable Fault Locator

Megger SG32-1500M



HIGH POTENTIAL CABLE & BUSTEST EQUIPMENT

The Baker ST112A 12kV Surge and Hipot Tester is a combination surge comparison tester and DC high-potential tester.

The Baker ST124R 24kV Surge Tester is a combi-nation surge comparison tester and DC high-po-tential tester.

Baker ST112A 12kV Surge Tester

Baker ST124R 24kV Surge Tester

Baker ST112A

Baker ST124R

The High Voltage PTS-130 130kV DC Hipot is a combination high voltage DC proof tester and HV Megohmmeters.

High Voltage PTS-130 130kV DC Hipot

High Voltage PTS-130

The High Voltage PTS-200 200kV DC Hipot with Megohmmeter is a combination high voltage DC proof tester and HV Megohmmeter.

High Voltage PTS-200 200kV DC Hi-pot with Megohmmeter

High Voltage PTS-200

DC Hipots



The High Voltage PTS-75 75kV DC Hipot with Megohmmeter is a combination high voltage DC proof testers, or hipots, and high voltage Meg-ohmmeter.

High Voltage PTS-75 75kV DC Hipot with Megohmmeter

High Voltage PTS-75

The High Voltage PTS-80 DC HiPot Tester and Megohmmeter has a 80kV Output. This model can be operated with a non sine wave producing inverter power source.

High Voltage PTS-80 80kV DC Hipot

High Voltage PTS-80

The High Voltage VLF-34E 34kV VLF Hipot sine wave output is suitable for using optional external PD and TD detection equipment. Using a TD and PD option, the VLF-34E is all that is needed for nearly all cable testing up to 25kV class mainte-nance testing.

The High Voltage VLF-65E 65kV VLF Tester is the latest addition to the new generation of VLF AC Hipots from HVI that use a dry-type, air cooled, solid state design with microprocessor control.

High Voltage VLF-34E 34kV VLF Hi-pot

High Voltage VLF-65E 65kV VLF Test-er

High Voltage VLF-34E


DC Hipots



The Hipotronics 880PL 80kV DC Hipot features accurate kilovoltmeter readings regardless of load current.

The HV Diagnostics HVA28TD 28kV VLF / DC High Voltage Test Instrument is the smallest VLF / DC unit on the market that includes an integrated Tan Delta (TD) measurement system to perform advanced electrical insulation diagnostics.

Hipotronics 880PL 80kV DC Hipot

HV Diagnostics HVA28TD 28kV VLF / DC High Voltage Test Instrument

Hipotronics 880PL

HV Diagnostics HVA28TD

The multi-output HVA30 is suitable for testing transformers, switchgear, rotating machines and other electrical apparatus.

HV Diagnostics HVA30 30kV VLF / DC High Voltage Test Instrument

HV Diagnostics HVA30

The HV Diagnostics HVA34 34kV VLF / DC High Voltage Test Instrument is one of the most ad-vanced HV test systems available and also one of the lightest, most compact instruments of its type on the market.



DC Hipots



The HV Diagnostics HVA60 60kV VLF / DC High Voltage Test Instrument is the instrument of choice when a single instrument is required that can test the full range of Medium Voltage cables available - that is 35kV rated cables and below.



The Megger 230425 0-4 kV AC and 0-5 kV DC High-Pot Tester is designed for safety and ease of operation, and readily adapt to development, maintenance or production testing.

Megger 230425 0-4 kV AC and 0-5 kV DC High-Pot Tester

Megger 230425

The HV Diagnostics HVA90 90kV VLF / DC High Voltage Test Instrument features the ability to test MV and Sub Transmission class cables includ-ing 69kV cable and below.



The HV Diagnostics TD90-MC 90kV Portable Tan Delta Measurement System is an easy to use, single piece, Digital Signal Processor based, field portable, fully automatic VLF (Very Low Frequen-cy) high voltage measurement instrument de-veloped for the high potential measuring of the insulation dielectrics of various types of electrical apparatus.

HV Diagnostics TD90-MC 90kV Portable Tan Delta Measurement System

HV Diagnostics TD90-MC

DC Hipots



The SKF (Baker) 12kV Static Motor Analyzer AWA-IV/12 is a fully-automated motor analyzer that au-tomatically performs repeatable, user-program-mable tests to thoroughly assess the strength of a motor’s insulation and circuit.

SKF (Baker) 12kV Static Motor Analyzer AWA-IV/12

SKF (Baker) AWA-IV/12

DC Hipots



The HD Electric Mark II 45kV Phasing Kit is an analog voltmeter / phaser designed to take volt-age measurements and perform phasing applica-tions on system voltages.

HD Electric Mark II 45kV Phasing Kit

HD Electric Mark II

The HD Electric MARK III 75kV Dual Range Volt-meters and Phasing Set is designed to measure AC and DC voltages on conductors from phase-to-ground and phase-to-phase, and allows users to determine if two conductors are in-phase or out-of-phase with one another.

HD Electric MARK III 75k 75kV Dual Range Voltmeters and Phasing Set

HD Electric MARK III

Phasing Kits

A completely wireless dual display voltage indi-cator and phasing tool for voltages up to 43kV. It includes a pair of lightweight, single stick line-to-ground voltage indicators that communicate with each other wirelessly.

HD Electric Double Vision Dual Dis-play Wireless VoltageIndicating Phaser - DDVIP-40

HD Electric DDVIP-40

A unique tester, the Bierer PD800W is an all-in-one kit for three-phase secondary systems, capac-itive test points, URD systems and overhead and transmission/substation systems,

Bierer PD800W Cordless Phasing Tester

Bierer PD800W



The High Voltage TD-34E 34kV Tan Delta Bridge, along with the High Voltage VLF-34E 34kV VLF Tester , is designed using current electronic tech-nology.

High Voltage TD-34E 34kV Tan Delta Bridge

High Voltage TD-34E

The HV Diagnostics TD30 30kV Tan Delta Bridge is an easy to use, single piece, Digital Signal Pro-cessor based, field portable, fully automatic VLF (Very Low Frequency) high voltage measurement

HV Diagnostics TD30 30kV Tan Delta Bridge

HV Diagnostics TD30

The HV Diagnostics TD60 60kV tan delta bridge uses wireless Bluetooth technology like to the TD 60 to allow easy setup in the field.

HV Diagnostics TD60 60kV Tan Delta Bridge

HV Diagnostics TD60

This unit must be used in combination with the HV Diagnostics HVA30 & HV Diagnostics HVA34

This unit must be used in combination with the HV Diagnostics HVA60

The High Voltage TDB-60 60kV Tan Delta Bridge is used for measuring the loss angle, or dissipa-tion factor, of shielded power cable.

High Voltage TDB-60 60kV Tan Delta Bridge

High Voltage TDB-60

This unit must be used in combination with the High Voltage VLF-34E 34kV VLF Tester.

Tan Delta Bridge Test Equipment



Megger CFL510F Hand-held Time Domain Reflec-tometer can be used on any cable consisting of at least two insulated metallic elements, one of which may be the sheath or shield of the cable.

The Megger CFL535G Advanced Dual Channel TDR is a state of the art, dual channel, high reso-lution, compact Time Domain Reflectometer

The unique features and technology of the Hi-potronics TDR1130A Time Domain Reflectometer make fault location cost effective and simple.

Megger CFL510F Hand-held TimeDomain Reflectometer

Megger CFL535G Advanced Dual Channel TDR

Hipotronics TDR1130A Time Domain Reflectometer

Megger CFL510F

Megger CFL535G

Hipotronics TDR1130A

High Voltage TDR1669 Time Domain Reflectom-eter is used to locate issues in copper, coax, and metallic cables and wiring.

High Voltage TDR1669 Time Domain Reflectometer

High Voltage TDR1669

Time Domain Reflectometers (TDR)



Time Domain Reflectometers (TDR)

The Megger MTDR1 Single-Phase Time Domain Reflectometer is used for prelocating cable faults.

Megger MTDR1 Single-Phase TimeDomain Reflectometer

Megger MTDR1



The High Voltage VLF-34E 34kV VLF Hipot is a new generation VLF AC hipot that uses a sol-id state design with microprocessor controls. It meets the requirements of applicable world standards regarding cable testing up to 25kV class maintenance testing.

High Voltage VLF-34E 34kV VLF Hi-pot


High Voltage’s VLF-4022CM is a Very Low Fre-quency AC high voltage test system – a 40kV AC VLF Hipot.

High Voltage VLF-4022CM 40kV AC VLF Hipot

High Voltage VLF-4022CM

The High Voltage VLF-6022 60kV VLF Hipot is a Very Low Frequency AC high voltage test system – a 60kV VLF Hipot.

High Voltage VLF-6022 60kV VLFHipot

High Voltage VLF-6022

The High Voltage ADL-1 Data Logger is designed to monitor, record, and wirelessly download all test data from an HVI Very Low Frequency tester to a computer.

High Voltage ADL-1 Data Logger

High Voltage ADL-1

VLF Hipots



The multi-output HVA30 is suitable for testing transformers, switchgear, rotating machines and other electrical apparatus.



The HV Diagnostics HVA34 34kV VLF / DC High Voltage Test Instrument is one of the most ad-vanced HV test systems available and also one of the lightest, most compact instruments of its type on the market.



The HV Diagnostics HVA60 60kV VLF / DC High Voltage Test Instrument is the instrument of choice when a single instrument is required that can test the full range of Medium Voltage cables available - that is 35kV rated cables and below.



The HV Diagnostics HVA28TD 28kV VLF / DC High Voltage Test Instrument is the smallest VLF / DC unit on the market that includes an integrat-ed Tan Delta (TD) measurement system to per-form advanced electrical insulation diagnostics.

HV Diagnostics HVA28TD 28kV VLF /DC High Voltage Test Instrument

HV Diagnostics HVA28TD

VLF Hipots



VLF Hipots

The HV Diagnostics HVA90 90kV VLF / DC High Voltage Test Instrument features the ability to test MV and Sub Transmission class cables includ-ing 69kV cable and below.



The HV Diagnostics TD90-MC 90kV Portable Tan Delta Measurement System is an easy to use, single piece, Digital Signal Processor based, field portable, fully automatic VLF (Very Low Frequen-cy) high voltage measurement instrument de-veloped for the high potential measuring of the insulation dielectrics of various types of electrical apparatus.

HV Diagnostics TD90-MC 90kV Portable Tan Delta Measurement System

HV Diagnostics TD90-MC


www.protecequip.com


Everest VIT XLF8575B Borescope puts the advan-tages of video inspection technology into a single, convenient carrying case.

The Olympus IPLEX RT is a lightweight industrial videoscope that features the unique PulsarPic im-age processor to produce exceptionally high-res-olution, bright images, and features a large 6.5-inch screen with an anti-reflective daylight-view monitor.

Everest VIT XL875 Pro Borescope puts the advan-tages of video inspection technology into a single, convenient carrying case.

Everest VIT XLF8575B Borescope

Olympus IPLEX RT Videoscope

Everest VIT XL875 Pro Borescope

Everest VIT XLF8575B

Olympus IPLEX RT

Everest VIT XL875 Pro


Borescopes


The Cosa portable dew point meter, model XPDM, is a battery operated, hand-held, hygrometer, de-signed for applications where quick and accurate dew point measurements have to be made.

Cosa XPDM Portable Dew Point Me-ter

Cosa XPDM

The Vaisala DM70 Dewpoint Analyzer measures dew point temperature accurately over a wide measurement range.

Vaisala DM70 Dewpoint Analyzer

Vaisala DM70

The ACL 300B Precision Electrostatic Locator is used to indicate the voltage generated from a charged object.

ACL 300B Precision ElectrostaticLocator

ACL 300B


Dewpoint Analyzers

Electrostatic Locators


The FLIR T440 Thermal Imaging Camera is a high performance infrared camera offers many fea-tures including: On-board Visual Camera, Thermal Fusion, Touch Screen and more.

The Fluke Ti32 Thermal Imager is the first 320 x 240 resolution infrared thermal imager that’s rug-ged enough to withstand a 6.5 foot drop. IR-Fu-sion and SmartView analyzing and reporting software included with every model. Clear, crisp images find problems fast.

Rely on the FLIR T640 Thermal Imaging Camera for portable infrared diagnostics. With a crisp image from the 640 x 480 detector, top-of-the-line thermal sensitivities (0.03 °C), and a measure-ment range from -40 to 2000 °C, the FLIR T640 Thermal Imaging Camera has the features you depend on to make critical decisions.

FLIR T440 Thermal Imaging Camera

Fluke Ti32 Thermal Imager

FLIR T640 Thermal Imaging Camera

FLIR T440

Fluke Ti32

FLIR T640


The FLIR C2 Compact Thermal Imaging System is a pocket-sized thermal camera designed for experts and contractors in the building industry.

FLIR C2 Compact Thermal Imaging System

FLIR C2

Infrared Cameras


The Mikron 7200v Infrared Camera with Visual Light Camera is a fully radiometric camera, ergo-nomically designed for comfortable one-handed point-and-shoot operation.

Mikron 7200v Infrared Camera with Visual Light Camera

Mikron 7200v

The Fluke Ti55 IR Flexcam Thermal Imager with Visual Light Fusion offers 320 x 240 resolution with IR-Fusion Technology.

Fluke Ti55 IR FlexCam Thermal Imag-er

Fluke Ti55


The DayCor Superb-OD Corona Camera offers a 5" transflective, adjustable bright color LCD with brightness of 450 cd/m2.

Ofil Systems DayCor Superb-OD Corona Camera

Ofil Systems DayCor Superb-OD

Infrared Cameras


The Extech 42540 Infrared Thermometer is a 16:1 IR thermometer with laser pointer. It has a a large backlit display and a wide temperature range from -58° to 1400°F (-50 to 760°C).

The Fluke 66 Infrared Thermometer is for non-contact temperature measurement, and can determine an object’s surface temperature by measuring the amount of infrared energy radi-ated by the object’s surface with a range of -32 to 600 ºC (-25 to 1100 ºF).

Fluke ST60T Non-Contact Infrared Thermometer is an accurate handheld IR device

Fluke 63 mini IR thermometer gives accurate readings over temperatures ranging from -40°C to 535°C with the enhanced optics for measure-ments in hard-to-reach and dangerous situations.

Extech 42540 Infrared Thermometer

Fluke 66 Infrared Thermometer

Fluke ST60T Non-Contact Infrared Thermometer

Fluke 63 Mini IR Thermometer

Extech 42540

Fluke 66

Fluke ST60T

Fluke 63


Infrared Thermometers


The Wavetek TMA10 Anemometer Thermometer is ideal for HVAC/R technicians measuring Heat/ Ventilation/Air conditioning/ Refrigeration wind flow and temperature in residential, commercial and industrial air conditioning systems.

Wavetek TMA10 AnemometerThermometer

Wavetek TMA10


Infrared Thermometers


The AEMC CA811 Lightmeter is a portable, easy-to-use instrument and provides selectable lux or footcandle units for display and features a 3 1/2 digit backlit LCD, HOLD and MAX functions.

The Fluke FOS-1300 Fiber Optic Light Source is a 1300 NM Fiber Optic Light Source that allow you to test different cable lengths

The AEMC CA813 Lightmeter is a portable, easy-to-use tool featuring optical sensors that is de-signed to match the response of the human eye and makes it an ideal instruments for workspace analysis and planning.

AEMC CA811 Lightmeter

Fluke FOS-1300 Fiber Optic Light Source

AEMC CA813 Lightmeter

AEMC CA811

Fluke FOS-1300

AEMC CA813


Light Meters


The EA Technology UltraTEV Plus+™ is an ad-vanced hand held, dual sensor, Partial Discharge (PD) detector, which enables more detailed iden-tification and comparison of PD activity across multiple substation assets.

EA Technology UltraTEV Plus+ Partial Discharge Detector

EA Technology UltraTEV Plus+


The PMDT PDetector Handheld Partial Discharge Detector is used for Online Partial Discharge (OLPD) testing of medium and high voltage elec-trical equipment.

PMDT PDetector Handheld Partial Discharge Detector

PMDT PDetector

The Omicron CAL 542 Charge Calibrator feeds a defined charge pulse into the measuring circuit. The partial discharge detection system is then calibrated to this value.

Omicron CAL 542 Charge Calibrator

Omicron CAL 542

This unit must be used in combination with the Omicron OMS 605 Portable Partial Discharge (PD) Monitoring System.

Identifies and reports Partial Discharge (PD) activity in live Medium and High Voltage (MV/HV) cable networks

EA Technology CableData Collector

EA Technology CableData

Partial Discharge Test Equipment



The Omicron OMS 605 Portable Partial Discharge (PD) Monitoring System is designed for inspec-tions of high-voltage assets under load, and can be employed for temporary and periodic, condi-tion-based monitoring.

Omicron OMS 605 Portable PartialDischarge (PD) Monitoring System

Omicron OMS 605

The Omicron PD Terminal Box is used for a con-venient connections of permanently-installed PD sensors to the OMS 605 without service interrup-tion.

Omicron PD Terminal Box

Omicron PD Terminal Box


The Omicron UCS1 UHF Cable Sensor is designed for reliable partial discharge (PD) testing and monitoring of high-voltage (HV) cable termina-tions.

Omicron UCS1 UHF Cable Sensor

Omicron UCS1


The Omicron MCT 120 High-Frequency Current Transformer is designed specifically for diagnos-tic and periodic partial discharge (PD) testing on high-voltage cable systems.

Omicron MCT 120 High-FrequencyCurrent Transformer

Omicron MCT 120





The Omicron UHF 620 Bandwidth Converter ex-tends the measurable bandwidth of the Omicron OMS 605 Portable Partial Discharge (PD) Moni-toring System up to the VHF and UHF frequency range.

Omicron UHF 620 BandwidthConverter

Omicron UHF 620


the Omicron UPG 620 Pulse Generator supports testing partial discharge measuring circuits in gas-insulated switchgear (GIS) and power trans-formers.

Omicron UPG 620 Pulse Generator

Omicron UPG 620




The Ametek 1726 Dual Function Digital Tachom-eter is a hand held instrument which can provide contact and non-contact measurement of ration-al and linear motions.

The Monarch Nova Strobe Digital Strobe Tachom-eter is a portable stroboscope used for diagnostic inspection and speed measurements.

Ametek 1726 Dual Function Digital Tachometer

Monarch Nova Strobe Digital Strobe Tachometer

Ametek 1726

Monarch Nova Strobe


A digital, battery-powered portable optical ta-chometer, which operates up to 25 feet (per-formance subject to intensity of ambient light) from a reflective target using a Class 2 laser light source.

Monarch Pocket Laser Tach 200

Monarch Tach 200

Tachometers


Operating on FCC frequencies reserved exclu-sively for business use, the Motorola XU2100 is a powerful two-way radio that helps businesses keep operations on schedule, maximize job shift productivity, enhance security, and increase over-all customer satisfaction.

Motorola XU2100 UHF Radio

Motorola XU2100


UHF Radios



Fuji PortaFlow X Ultrasonic Flow Meter is used for measuring flow rates through pipes from the outside.

Fuji PortaFlow X Ultrasonic FlowMeter

Fuji PortaFlow X

The UE Systems UltraProbe 100 Ultrasonic Leak Detector is the perfect fit for someone looking for cost-effective analog ultrasonic inspection tech-nology. The Ultraprobe senses high frequency sounds produced by operating equipment, leaks and electrical discharges.

UE Systems UltraProbe 100 Ultrason-ic Leak Detector

UE Systems UltraProbe 100

Combining state-of-the-art technology with every known plant inspection requirement, the UE Sys-tems Ultraprobe 15,000 Touch creates an entire ultrasonic condition monitoring lab that fits your hand.

UE Systems Ultraprobe 15,000 Touch

UE Systems Ultraprobe 15,000

Used with the UE Systems Ultraprobe 15,000 Touch, the Parabolic Dish is a highly sensitive, directional sensor capable of doubling the detec-tion distance of a standard scanning module and provides pinpoint accuracy.

UE Systems UWC-15 Ultrasonic Wave Form Concentrator (Parabolic Dish)

UE Systems UWC-15

This unit must be used in combination with the UE Systems Ultraprobe 15,000 Touch.

Ultrasonic Detectors


The Fluke 810 Vibration Tester with diagnostic technology helps to quickly identify and prioritize mechanical problems. Primarily used for trou-bleshooting problem equipment, the Fluke 810 Vibration Tester can also be used to survey equip-ment before or after planned maintenance.

The SPM Vibrameter VIB-11 Vibration Meter is a hand-held instrument for periodic measure-ments, to detect out-of-balance, misalignment, and other mechanical faults in rotating machines.

Rion VM-82 Vibration Meter is an easy-to-use vibration meter for acceleration, velocity, and displacement. It is especially suited for routine maintenance and monitoring of rotational ma-chines.

Fluke 810 Vibration Tester

SPM Vibrameter VIB-11 Vibration Me-ter

Rion VM-82 Vibration Meter

Fluke 810

SPM VIB-11

Rion VM-82


Vibration Meters


www.protecequip.com


www.protecequip.com

INSULATION & GROUND TEST

EQUIPMENT

The AEMC 2610 Ground Fault Detector / Current Leakage Probe measures current shunted to ground caused by insulation faults.

The AEMC 3731 Clamp On Ground Resistance Test Set measures ground rod and small grid resist-ance, without the use of auxiliary ground rods.

The AEMC 6416 Clamp On Ground Resistance Tester measures ground rod and grid resistance and impedance without the use of auxiliary rods.

The AEMC 3711 Clamp On Ground Resistance Test Set simply clamps around the ground conductor or rod and measures the resistance to ground.

AEMC 2610 Ground Fault / Leakage Detector

AEMC 3731 Clamp On Ground Resistance Test Set

AEMC 6416 Clamp On Ground Resistance Tester


AEMC 2610

AEMC 3731

AEMC 6416

AEMC 3711


Clamp On Ground Test Equipment



The Megger DET24C is an advanced clamp-on ground resistance testers that set new standards in terms of access, performance, features, simplic-ity of operation and safety.

Megger DET24C Ground Resistance Tester

Megger DET24C

Clamp On Ground Test Equipment



The AEMC 2610 Ground Fault Detector / Current Leakage Probe measures current shunted to ground caused by insulation faults.

he AEMC 3731 Clamp On Ground Resistance Test Set measures ground rod and small grid resist-ance, without the use of auxiliary ground rods.

The AEMC 3711 Clamp On Ground Resistance Test Set simply clamps around the ground conductor or rod and measures the resistance to ground.

AEMC 2610 Ground Fault / Leakage Detector



AEMC 2610

AEMC 3731

AEMC 3711

Ground Resistance Test Equipment

The AEMC 6416 Clamp On Ground Resistance Tester measures ground rod and grid resistance and impedance without the use of auxiliary rods.

AEMC 6416 Clamp On Ground Resistance Tester

AEMC 6416



The Bender LT3000 Line Isolation Monitor (LIM) and GFCI Tester is an effective and versatile test-ing instrument for easily fulfilling NFPA 99 re-quirements that LIM and GFCI tests be conduct-ed at regular intervals.

Bender LT3000 Line Isolation Monitor (LIM) and GFCI Tester

Bender LT3000

The Fluke 1625 GEO Earth Ground Tester is able to measure earth ground loop resistances using only clamps – called Stakeless testing. This meth-od doesn’t require the use of earth ground stakes or the disconnection of ground rods.

The Fluke 1625-2 GEO Earth Ground Tester can perform all four types of earth ground meas-urement: 3-and 4-pole Fall-of-Potential (us-ing stakes), 4-pole soil resistivity testing (using stakes), Selective testing (using 1 clamp and stakes) and Stakeless testing (using 2 clamps only)

Fluke 1625 GEO Earth Ground Tester

Fluke 1625-2 GEO Earth Ground Tester

Fluke 1625

Fluke 1625-2


The Megger 250202 DET2/2 Digital Ground Resist-ance Tester measures earth electrode resistance and soil resistivity to increase the safety and per-formance of electrical systems.

Megger 250202 DET2/2 Digital Ground Resistance Tester

Megger 250202 DET2/2



The Megger DET3TC Digital Ground Tester is rat-ed to IP54 making it truly an outdoor instrument for 2 and 3 pole testing.

Megger DET3TC Digital Ground Test-er

Megger DET3TC

The Megger DET24C is an advanced clamp-on ground resistance testers that set new standards in terms of access, performance, features, simplic-ity of operation and safety.

Megger DET24C

Megger DET24C Ground Resistance Tester

The Megger Battery Ground Fault Tracer (BGFT) is an economical, easy-to-use instrument that identifies, traces and locates ground faults in un-grounded DC systems— on-line.

Megger Battery Ground Fault Tracer

Megger BGFT

The Megger Battery Ground Fault Locator (BGL) simplifies the tracking of ground faults on float-ing DC-powered control systems.

Megger Battery Ground Fault Locator

Megger BGL




The Megger DET3TD Digital Ground Tester is rat-ed to IP54 making it truly an outdoor instrument for 2 and 3 pole testing.

The Megger DET4TCR2 Ground Resistance Test Kit is a rechargeable battery powered 4-terminal tester with selectable test frequencies, greater measurement sensitivity and attached rod tech-nique and stakeless measurement capability.

Megger DET3TD Digital Ground Test-er

Megger DET4TCR2 Ground Resist-ance Test Kit

Megger DET3TD

Megger DET4TCR2


The Megger DET4TD Earth Tester has been de-signed to be easy to use, a large selector switch makes selection of 2 pole, 3 pole or 4 pole test easy with gloved hands – and the design makes the fitting of shorting links to perform 2 pole tests a thing of the past.

Megger DET4TD Earth Tester

Megger DET4TD

The Megger DET62D Ground Resistance Test Kit is a fully automatic, three terminal instrument built into a rugged, water resistant case giving protection for outdoor use.

Megger DET62D Ground Resistance Test Kit

Megger DET62D



OHMIC Instruments Model BET-300AD performs electrical safety tests for compliance to AAMI, UL-544 and NFPA-99 standards.

Ohmic BET-300AD Equipotential Test Set

Ohmic BET-300AD

The Metrel 2088 Ground Tester is a multifunc-tion, digital measuring instrument for testing of earthing and lighting protection systems, PE conductor continuity testing and DC insulation resistance measurement on low voltage electrical installations in accordance with EN 61557.

Metrel 2088 Ground Tester

Metrel 2088

The Megger Professional Earth Test Kit is de-signed to be as practical as possible. Housed in a tough polyethylene carry case, the kit is stored neatly, well-protected and easy to transport.

Megger Professional Earth Test Kit

Megger Earth Test Kit

Used with the Omicron CPC 100, the CP CU1 Mul-tifunctional coupling unit measures line imped-ances and k-factors on overhead lines and power cables.

Omicron CP CU1 Multifunctional Coupling Unit for the CPC 100

Omicron CP CU1

This unit must be used in combination with the Omicron CPC 100.




The AEMC 1kV 1026 Digital Megohmmeter is a compact, lightweight, battery-operated , hand-held meter. It provides four functional tests, and is a megohmmeter, DC voltmeter, AC voltmeter, ohmmeter and a continuity tester.

The AEMC 5060 5kV Megohmmeter features in-clude automatic calculation and presentation of the Dielectric Absorption Ratio (DAR), Polarization Index (PI) and Dielectric Discharge (DD).

AEMC 1026 1kV Digital Megohmmeter

AEMC 5060 5kV Megohmmeter

AEMC 1026

AEMC 5060

Amprobe DM-III Multitest Power Quality Recorder provides the essential functions and capabilities required to operate accurately and effectively in today’s demanding electrical environments. Includes phase sequence indicator, ground tester, and 1kV megohmmeter.

Amprobe DM-III Multitest Power Quality Recorder

Amprobe DM-III

The Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit includes the Fluke 1587 FC 2-in-1 Insulation DMM, the Fluke i400 Current Clamp and the Fluke 9040 Phase Rotation Indica-tor.

Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit

Fluke 1587/MDT FC

Insulation Resistance (Megohmmeters) Test Equipment


The Megger MIT40X Industrial Insulation Tester can be selected over a range from 10 V to 100 V. Applications include avionics, marine and other military applications, manufacturing, electrostatic measurement and component testing.

Megger MIT40X Industrial Insulation Tester

Megger MIT40X

The Megger 210415 15kV Analog Megohmmeter is an analog meter that measures insulation resist-ance to help reduce shock hazards and downtime on electrical systems that include wires, cables, transformers, and electrical motors.

Megger 210415 15kV AnalogMegohmmeter

Megger 210415


The Megger MIT410 Industrial Insulation Tester has 5 insulation voltage ranges from 50 V to 1000 V and an insulation resistance range of 100 GΩ.

Megger MIT410 Industrial Insulation Tester

Megger MIT410

The Megger BM15 Analog 5kV Insulation Resist-ance Tester offers four test voltages to 5 kV, a dual power supply option, a resilient mounted ana-logue scale, a voltage range to 600 V that indi-cates auto discharge, a pass/fail overlay for rapid testing, and a single scale for insulation value, helping to avoid operator error.

Megger BM15 Analog 5kV Insulation Resistance Tester

Megger BM15




Offering CAT IV, the Megger MIT525 is compact, light 5kV insulation resistance tester for the diag-nostic testing and maintenance of high voltage electrical equipment. As well as measuring insu-lation resistance to 10 TΩ, the Megger MIT525 5kV Insulation Resistance Tester also offers various diagnostic tests such as polarization index, dielec-tric absorption ratio, step voltage, dielectric dis-charge and ramp testing.

Megger MIT525 5kV Insulation Resistance Tester

Megger MIT525

The Megger 520/2 5kV Insulation Resistance Tester is designed specifically to assist the user with the testing and maintenance of high volt-age equipment. The instrument is designed in a landscape style which is more familiar and user friendly.

Megger MIT520/2 5kV Insulation Resistance Tester

Megger MIT520/2

Designed to cope with the additional require-ments of the telecommunications industry, the Megger MIT485 supports both test result storage and downloading. Continuity testing at 200mA down to 0.01Ω. Insulation testing to 1000V and to 200GΩ


Megger MIT485

The MIT430-TC2 allows the user to determine the condition of the insulation of the twisted copper cable pair, which could cause problems for servic-es such as voice, video, and data or VOIP.

Megger MIT430-TC2 Insulation Resistance and Continuity Tester

Megger MIT430-TC2




Megger’s new range DC insulation tester, the MIT1525, is targeted at original equipment man-ufacturers and industrial companies. The top of the range Megger MIT1525 performs insulation re-sistance tests up to 15kV with a 30 TW maximum resistance and an accuracy of ±5 % from 1 MW up to 3 TW.


Megger MIT1525

The Megger S1-554 5kV Insulation Resistance Tester is designed specifically to assist you with the testing and maintenance of high voltage electrical equipment.

Megger S1-554 5kV Insulation Resistance Tester

Megger S1-554

Metrel 2077 5kV Insulation Resistance Tester is an advanced, digital HV measuring instrument with maximum test voltage up to 5000 V DC and resistance measuring range up to 5 TΩ.

Metrel 2077 5kV Insulation Resist-ance Tester

Metrel 2077

Offering CAT IV, the Megger MIT1025 is compact, light 10 kV insulation resistance tester for the di-agnostic testing and maintenance of high volt-age electrical equipment. As well as measuring insulation resistance to 20 TΩ, the MIT1025 also offers various diagnostic tests such as Polarisation index, Dielectric Absorption Ratio, Step Voltage, Dielectric discharge and ramp testing.

Megger MIT1025 10kV InsulationResistance Tester

Megger MIT1025




The Metrel 3103 1kV Insulation Resistance Tester is a portable hand-held battery powered test instru-ment intended for testing of safety measures on mains installations.

Metrel 3103 1kV Insulation Resistance Tester

Metrel 3103


The Metrel 3200 TeraOhm 10kV Insulation Re-sistance Tester is a professional insulation tester, which allows measuring and testing of high volt-age equipment.

Metrel 3200 TeraOhm 10kV Insulation Resistance Tester

Metrel 3200


www.protecequip.com


The ABB CB-2000 Portable Capacitance Meter is characterized by its compact design and low weight, which makes it easy to carry when con-ducting measurements.

Combined with the Omicron CPC 100, the Omi-cron CP TD1 Capacitance/Dissipation Factor Test-ing Device (an Delta) measures the capacitance and dissipation factor (power factor) with labora-tory precision.

ABB CB-2000 Portable Capacitance Meter

Omicron CP TD1 Capacitance/Dissipa-tion Factor Testing Device (Tan Delta)

ABB CB-2000

Omicron CP TD1



Electrical tests on transformers, current trans-formers, voltage transformers, grounding sys-tems, lines and cables, and circuit breakers can be performed with the Omicron CPC 100 Multi-Func-tional Primary Test System.

Omicron CPC 100 Multi-Functional Primary Test System

Omicron CPC 100

Capacitance & Inductance Test Equipment

The B&K Precision 885 High Accuracy Handheld LCR/ESR Meter, a synthesized in-circuit meter, is the first handheld meter of this type on the mar-ket. With a wide range of test frequencies up to 10 kHz, The BK 885 has many measurement parameters including Z, L, C, DCR, ESR, D, Q, and Ø as well.

B&K Precision 885 High Accuracy Hand-held LCR/ESR Meter

B&K Precision 885


PowerComm PCA-4125


The PowerComm PCA-4125 Power Communica-tions Analyzer offers waveform graphs and con-versions displayed automatically, providing the data needed to quickly identify and resolve issues, and offers a frequency range from 5Hz to 5MHz

The LC53 Capacitor/Inductor Analyzer (“Z” Meter) checks Out-of-Circuit Capacitance and induct-ance values and capacitor leakage.

PowerComm PCA-4125 Power Communications Analyzer

Sencore LC53 Capacitance and Inductance Meter

Sencore LC53




Fluke 336 Clamp Meter is a 600A, AC/DC, Clamp on Ammeter

Fluke 336 Clamp Meter

Fluke 336

The Fluke 337 Clamp Meter is a True RMS 1000A clamp meter with MIN/MAX capability and meas-ures AC/DC current and voltage, ohms, motor start up current (in-rush) and frequency.


Fluke 337

The HD Electric HVA-2000 High Voltage Digital Ammeter takes ampere measurements up to 2kA on conductors up to 500kV quickly and easily.

HD Electric HVA-2000 High Voltage Digital Ammeter

HD Electric HVA-2000

The Arbiter 928A Power System Multimeter with Floating-Point DSP™ Digital Signal Analysis is an AC Power measurement instrument used to measure basic data and power quantities, it also measures power quality including harmonics, flicker, sags, surges and interruptions.

Arbiter 928A Power System Multimeter

Arbiter 928A

Current Meters



Fluke 33 1000A AC/DC Clamp On Ammeter

The Fluke 87 Industrial Multimeter with True RMS, allows you take the guesswork out of drive system troubleshooting even in loud, high energy, and high altitude locations. The unit it can meas-ure AC/DC voltage to 1000V and AC/DC current to 10A.

Fluke 33 1000A AC/DC Clamp On Ammeter

Fluke 87 Industrial Multimeter

Fluke 33

Fluke 87

The Fluke 87-III True RMS Multimeter is a True RMS responding device that can measure AC/DC voltage to 1000V and AC/DC current to 10A. AC crest factor can be up to 3 at full scale, 6 at half scale.

Fluke 87-III True RMS Multimeter

Fluke 87-III

The Arbiter 928A Power System Multimeter with Floating-Point DSP™ Digital Signal Analysis is an AC Power measurement instrument used to measure basic data and power quantities, it also measures power quality including harmonics, flicker, sags, surges and interruptions.

Arbiter 928A Power System Multimeter

Arbiter 928A

Multimeters


The Fluke 787 ProcessMeter combines a DMM and a loop calibrator in one rugged, handheld tool, in one device.

Fluke 787 ProcessMeter

Fluke 787


The Fluke 287 True-RMS Electronics Logging Mul-timeter documents performance and graphically displays what happened.

Fluke 287 True-RMS Electronics Logging Multimeter

Fluke 287

The Fluke 322 is designed to verify the presence of load current, AC voltage and continuity of cir-cuits, switches, fuses and contacts. This small and rugged clamp meter is ideally suited for current measurements up to 400 A in tight cable com-partments. The Fluke 322 also offers DC voltage measurements and has a higher resolution for loads below 40 A.


Fluke 322

Delivering the accuracy and advanced trouble-shooting capabilities needed to solve problems fast, the Fluke 87-V True RMS Multimeter, uses its low pass filter function to measure voltage and frequency accurately on electrically “noisy equip-ment like adjustable speed motor drives.

Fluke 87-V True RMS Multimeter

Fluke 87-V

Multimeters



The Hipotronics KV100A 100kV AC / DC Kilovolt Meter is a highly accurate, portable high voltage measurement systems traceable to National and International standards.

The Megger PMM-1 Power Multimeter is a port-able, battery or line operated, multi-function measuring instrument designed to measure ac primary and secondary currents, voltage power, reactive power, phase angle and frequency of single and three-phase systems. .

The Fluke 1587 Insulation Multimeter combines a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versa-tility for both troubleshooting and preventative maintenance.

Hipotronics KV100A 100kV AC / DC Kilovolt Meter

Megger PMM-1 Power Multimeter

Fluke 1587 Insulation Multimeter

Hipotronics KV100A

Megger PMM-1

Fluke 1587

Multimeters

A handheld, battery-operated tool for measuring electrical parameters, supplying steady or ramp-ing current to test process instruments, the Fluke 789 ProcessMeter provides a > 24 V loop power supply. It has all the features of a digital multime-ter, plus current output capability.


Fluke 789



The Tri State TSW-22 10:1, 5kV High Voltage Di-vider is a 10:1 voltage divider for use on AC or DC circuits up to 5000 Volts.

Tri State TSW-22 10:1, 5kV High Volt-age Divider

Tri State TSW-22



PowerComm PCA-4125

Multimeters



General Electric IB-9 Watthour Meter

Radian Research RB-10 Bantam Lite Portable Test Kit makes On-site Watthour Meter Testing more simple. It is a field rugged watthour meter test system with integrated load and RD-20 reference standard.

The Radian Research RM-DS Meter Disk Sensor is a reflective pickup assembly used to sense the disk rotation of an induction type meter.

General Electric IB-10 Watthour Meter GE 120-240V 1-5-12.5-50 Amp 60Hz

General Electric IB-9 Watthour Meter

Radian Research RB-10 Bantam Lite Portable Test Kit

Radian Research RM-DS/s Meter Disk Sensor

General Electric IB-10 Watthour Me-ter

General Electric IB-9

Radian Research RB-10

Radian Research RM-DS/s

General Electric IB-10

This unit must be used in combination with the Radian Research RB-10 Bantam Lite Portable Test Kit

Watthour Meters


The Scientific Columbia SC10 (220-1) Watthour Standard is designed for testing watthour meters. Features include a full autoranging for current and potential inputs and auxiliary power, back-lit LCD readout, and amaximum resolution to 10 µ.Wh (0.00001 Wh).

Scientific Columbia SC10 (220-1) Wat-thour Standard

Scientific Columbia SC10


Watthour Meters


www.protecequip.com


www.protecequip.com

MOTOR & ROTATING APPARATUS TEST

EQUIPMENT


MOTOR & ROTATING APPARATUSTEST EQUIPMENT

The AEMC 1026 1kV Digital Megohmmeter is a compact, lightweight, battery-operated , hand-held meter. It provides four functional tests, and is a megohmmeter, DC voltmeter, AC voltmeter, ohmmeter and a continuity tester.




AEMC 1026

AEMC 5060



Amprobe DM-III

Megohmmeters



Fluke 1587/MDT FC





Megger 210415

Megohmmeters



Megger MIT40X



Megger MIT410



Megger BM15



Megohmmeters



Megger MIT525



Megger MIT485



Megger MIT520/2



Megger MIT430-TC2







Megger S1-554

Metrel 2077



Megger MIT1025



Megger MIT1525

Megohmmeters





Metrel 3200

Megohmmeters



Metrel 3103



The PdMA MCE 5kV Electric Motor Analyzer offers the most versatile approach to troubleshooting and trending de-energized electric motors on the market today.

The PdMA MCE Max 5kV Motor Circuit Evalua-tion Analyzer is powered by MCEGold® software integrates testing, diagnostics, inventory control, scheduling, and cost containment.

PdMA MCE 5kV Electric Motor Analyzer

PdMA MCE Max 5kV Motor Circuit Evaluation Analyzer

PdMA MCE

PdMA MCE Max

Motor Analyzers



The Amprobe PRM-1 Phase Sequence Indicator identifies the phase sequence of the three phase electrical system.

Amprobe PRM-1 Phase Sequence Indicator

Amprobe PRM-1





PdMA MCE

PdMA MCE Max

Phase Sequence & Motor Rotation Test Equipment



Fluke 1587/MDT FC



The Tri State TSW-45 5kV Phase Sequence Indica-tor provides positive phase sequence indications, instant readings. .

Tri State TSW-45 5kV Phase Se-quence Indicator

Tri State TSW-45




The Doble M4000 M4100 Power Factor Insulation Analyzer and High Voltage Apparatus Tester is the industry standard for power apparatus and insulation testing. Its unique combination of test capabilities and artificial intelligence analysis soft-ware makes it the power industry’s most trusted Power Factor/Tan-Delta instrument.

The Doble M4140 Capacitor Bank Test Kit con-tains a clamp-on CT probe and cable that allows individual capacitors in a high voltage capacitor bank to be tested without the need to disconnect them from the bank.

When testing large specimens such as motors, generators or the occasional GSU with the Do-ble M4000 M4100 Insulation Analyzer, the Doble Type C 10kV Resonating Inductor provides the extra current needed to achieve high voltage test levels.

The Doble M4110 Leakage Reactance Module, also referred to as the short-circuit impedance test set, is a reliable tool to help indicate transformer winding deformation when used in conjunction with a Doble M4000 M4100 Insulation Analyzer.

Doble M4000 M4100 Power Factor Insulation Analyzer

Doble M4140 Capacitor Bank Test Kit

Doble Type C 10kV Resonating Inductor

Doble M4110 Leakage Reactance Module

Doble M4000 M4100

Doble M4140

Doble Type C

Doble M4110

This unit must be used in combination with the Doble M4000 M4100 Power Factor Insulation Analyzer



Power Factor Test Equipment



The Model CB-100 28V Low-Voltage Capacitance and Insulation Power Factor Test Set is a self-con-tained instrument for the accurate measurement of electrical insulation characteristics.

Megger CB-100 28V Power Factor Test Set

Megger CB-100

Megger Delta-2000 Power Factor Test Set is a fully automatic test set has been designed to provide a comprehensive AC insulation diagnos-tic test for high voltage apparatus, such as trans-formers, bushings, circuit breakers, cables, light-ning arrestors and rotating machinery.

Megger Delta-2000 Power Factor Test Set

Megger Delta-2000

The Megger DELTA-3000 10 kV Automated Insu-lation Power Factor Test Set is a fully automatic 10 kV insulation power factor test set designed for condition assessment of electrical insulation in high voltage apparatus, such as transformers, bushings, circuit breakers, cables, lightning ar-resters and rotating machinery.

Megger DELTA-3000 10 kV Automat-ed Insulation Power Factor Test Set

Megger DELTA-3000

The Megger DELTA4000 Series 12 kV Insulation Diagnostic System is a fully automatic 12 kV insu-lation power factor/dissipation factor (tan∂) test set designed for condition assessment of electri-cal insulation in high voltage apparatus such as transformers, bushings, circuit breakers, cables, lightning arresters and rotating machinery.

Megger DELTA4000 Series 12 kV Insulation Diagnostic System

Megger DELTA4000







Omicron CP TD1This unit must be used in combination with the Omicron CPC 100.



Omicron CPC 100

The Megger IDAX300 Insulation Diagnostic Ana-lyzer delivers an accurate and reliable condition assessment of insulation in transformers, bush-ings, generators and cables.

Megger IDAX300 InsulationDiagnostic Analyzer

Megger IDAX300

The Megger DELTA4310 12kV Insulation Diagnos-tic System is a fully automatic insulation power factor/dissipation factor (tan∂) test set designed for condition evaluation of electrical insulation in high voltage equipment

Megger DELTA4310 12kV Insulation Diagnostic System

Megger DELTA4310







Baker ST112A

Baker ST124R




Surge Test Equipment

www.protecequip.com


The Astro-Med Dash 18 offers a large real-time waveform display, internal hard drive for captur-ing data, integral PC connectivity and optional chart recorder and supply data in the format you want.

The Astro-Med TMX-18 High-Speed Data Acquisi-tion System features a high resolution; 17” touch screen display, as well as pre-defined set up options, making test setup easily, and can effort-lessly create and switch among multiple setup configurations.

Astro-Med Dash 18 18-Channel Chart Recorder

Astro-Med TMX-18 High-Speed Data Acquisition System

Astro-Med Dash 18

Astro-Med TMX-18


Chart Recorders


The AEMC 275HVD Non-Contact Voltage Detector is designed to detect the presence of high volt-age up to 275kV without physical contact.

AEMC 275HVD Non-Contact Voltage Detector

AEMC 275HVD

The AEMC MN103 10A Rigid Current Probe meas-ures leakage current and low currents from 1mA, and measures current on 5A secondaries.

AEMC MN103 10A Rigid Current Probe

AEMC MN103

The AEMC MR521 AC/DC Current Probe offers cur-rent ranges 100mA to 3000Amrs, and measures both AC, DC and AC/DC.

AEMC MR521 1000AC, 1500 DC, Rigid AC/DC Current Probe

AEMC MR521

The AEMC SL201 AC/DC Current Probe measures low DC or AC from 50mA to 150ADC, 120AAC.

AEMC SL201 AC/DC Current Probe

AEMC SL201


Current Probes


The Amprobe A-1000 AC/DC Clamp On Transduc-er allows a Non True RMS DMM to read True Rms Current and also has Waveform Display capabil-ities when used with an oscilloscope. The A-1000 can accurately measure currents up to 1000 A RMS.

Dranetz 300A - 3000A Flexible Current Probes

The Dranetz RR3035A-24Flexible Current Probe is a flexible and lightweight measuring head that allows for quick and easy installation in hard to reach areas,

The Amprobe ACF-3000DM-A Flexible Current Transducer is designed to utilize the light weight and flexibility of the Flexible AC Current probe, and extends current range to 3000 A

Amprobe A-1000 AC/DC Clamp On Transducer

Dranetz 300A - 3000A Flexible Cur-rent Probes

Dranetz RR3035A-24 Flexible Current Probe

Amprobe ACF-3000DM-A Flexible Current Transducer

Amprobe A-1000

Dranetz 300A

Dranetz RR3035A-24

Amprobe ACF-3000DM-A


Current Probes


The Dranetz RR3035A-36 Flexible Current Probe can be used to measure currents up to 30A, 300A and 3000A when used in conjunction with oscil-loscopes, recorders or data loggers.

Dranetz RR3035A-36 Flexible Current Probe

Dranetz RR3035A-36

The Dranetz TR-2023 3000A Current Transformer is a 3000 Amp Current Transformer designed for use with the Dranetz PowerXplorer PX5 Power Monitor.

Dranetz TR-2023 3000A CurrentTransformer

Dranetz TR-2023

The Dranetz TR-2510 10A Rigid Current Probe is designed for use with the Dranetz PowerXplorer PX5 Power Monitor.

Dranetz TR-2510 10A Rigid Current Probe

Dranetz TR-2510


The Fluke 3005 5A Current Probe and flexible cur-rent probes are specially designed to work seam-lessly with Fluke power monitors.

Fluke 3005 5A Current Probe

Fluke 3005

Current Probes



Fluke 3014 40A Current Probe with a current range of 0.01-40A, and an accuracy of 1% RDG +/- 0.1% FS.

Fluke 3014 40A Current Probe

Fluke 3014

Fluke 3310 5000A Flex Current Probe, is a 24”, 5000A that can be used with the Fluke 1750 to measure current from very low frequencies up to 15 kHz.

Fluke 3310 5000A Flex Current Probe

Fluke 3310

The Fluke 80K-6 High Voltage Probe is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 volts peak AC or DC Overvoltage Category I. 6kV DC / 4.3kV AC High Voltage Probe

Fluke 80K-6 High Voltage Probe

Fluke 80K-6

The Fluke 80T-IR Infrared Temperature Probe is a noncontact temperature measurement accessory for use with a test instrument capable of measur-ing DC volts in the millivolt range such as a digital multimeter (DMM). The probe has a temperature range of -18°C to 260°C (0°F to 500°F).

Fluke 80T-IR Infrared Temperature Probe

Fluke 80T-IR

This unit must be used in combination with the Fluke 1750 Three Phase Power Recorder.

Current Probes



Fluke HV231-10 28kV is a high voltage probe for AC or DC, with an extended voltage measuring to 40 kV. Maximum working voltage is 40 kV DC or peak AC (28 kV RMS AC).

The Fluke i2000 Flex AC Current Clampcan be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers.

The Fluke i410 AC/DC current clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current.

The Fluke i1010 AC/DC Current Clamp is a highly reliable device that measures 1 A to 1000 A and provides accurate current reading without break-ing the circuit.

Fluke HV231-10 28kV AC High Voltage Probe

Fluke i2000 Flex AC Current Clamp

Fluke i410 AC/DC Current Clamp

Fluke i1010 AC/DC Current Clamp

Fluke HV231-10

Fluke i2000

Fluke i410

Fluke i1010

Current Probes



The Hastings 6799 Hot Stick Tester applies 75kV/ft (wet) /100kV/ft (dry) in accordance with OSHA 1910.269. Designed for portability. Utilizes a 2500 Volt output to indicate leakage current values that would be present if 75KV were applied (wet test) and 100KVAC per foot of hot stick (dry test).

Hastings 6799 Hot Stick Tester

Hastings 6799

Reliable Power Meter (Fluke) 3014 40A Current Transformer (CT) are specially designed to work seamlessly with Fluke Power Quality / RPM Full Disclosure Power Monitors.

Reliable Power Meter (Fluke) 3014 40A Current Transformer (CT)

Reliable Power Meter (Fluke) 3014

Rx Monitoring Services 3,000A Rope has a wire Length of 8ft, with a measuring range of 5A- 3,200Arms AC

RxMS 3,000A Rope

RxMS 3,000A Rope

Rx Monitoring Service 10,000A Gen2 Rope: Wire Length 12ft with a measuring range: 20A- 10,000Arms AC

RxMS 10,000A Gen2 Rope

RxMS 10,000A Gen2 Rope

Current Probes



RxMS AC Current Probe 10A Clamp-On 0.75” Di-ameter. Clamp-On 10 Arms medium, wire Length 12ft, with a measuring range of 0.01A- 12Arms AC

RxMS AC Current Probe 200A Clamp-On 0.75” Di-ameter. Wire Length 12ft with a measuring range of 0.5A- 240Arms AC

RxMS AC Current Probe 10A Clamp-On 0.75” Diameter

RxMS AC Current Probe 200A Clamp-On 0.75” Diameter

RxMS AC Current Probe 10A

RxMS AC Current Probe 200A

The RxMS 4000A 4.5”x2.5” ID Probe is an data logging tool that is utilized to monitor multiple points in your system as well as the operating environment surrounding it.

The RxMS 2000A 2" ID Probe is an data logging tool that is utilized to monitor multiple points in your system as well as the operating environment surrounding it.

RxMS 4000A 4.5x2.5 ID Probe

RxMS 2000A 2” ID Probe

RxMS 4000A

RxMS 2000A

Current Probes


The RxMS Wireless Communications Device is a data logging tool that is utilized to monitor multi-ple points in your system as well as the operating environment surrounding it.

RxMS Wireless Communications Device

RxMS Wireless Comm Device


The RxMS Wireless Temperature and Humidity Probe is an data logging tool that is utilized to monitor multiple points in your system as well as the operating environment surrounding it.

RxMS Wireless Temperature and Humidity Probe

RxMS Wireless T/H Probe

The RxMS Wireless Temperature and Humidi-ty Probe is a data logging tool that is utilized to monitor multiple points in your system as well as the operating environment surrounding it.

RxMS Wireless Battery Dc Probe

RxMS Dc Probe

The RxMS Wireless DCx 10 Channel Probe is a data logging tool that is utilized to monitor single 600V DC, 10 Channel 60V DC,

RxMS Wireless DCx 10 Channel Probe

RxMS Wireless DCx

Current Probes



Summit Technology provides its 5KVP High Volt-age Probe Set to allow for direct connection to 600 to 5kv rms AC or DC.

Summit Technology 5KVP High Voltage Probe Set

Summit Technology 5KVP

Connect directly to 12,500V power systems with the Summit Technology 15KVP, 15k Voltage Probe Set with Hot Sticks allowing for complete analysis.

Summit Technology 15KVP 15k Volt-age Probe Set with Hot Sticks

Summit Technology 15KVP

Current Probes


The AEMC L230 AC Voltage Simple Logger is a single channel, low cost data logger that requires no user setup. It has the ability to automatically adjust both its scale range and its sample rate to optimize the recording session. This AC voltage logger’s measurement range is 0 to 300Vrms.

The Fluke 2686 Data Acquisition System combine the best of lab precision with the rugged flexibili-ty required in rapidly changing industrial applica-tions. Up to 300V input isolation, 1600V transient overvoltage protection (2680A-PAI)

The Fluke 2645 NetDAQ Networked Data Acqui-sition Unit is a powerful combination of hardware and software that’s ideal for small-to-medium scale process monitoring and test systems, and offers a voltage range of 90mV to 50V DC; 50mV to 30V AC.

AEMC L230 AC Voltage Simple Log-ger

Fluke 2686 Data Acquisition System

Fluke 2645 NetDAQ Data Acquisition Unit

AEMC L230

Fluke 2686

Fluke 2645


The Allen-Bradley 193-DNCT DeviceNet Config-uration Terminal is a handheld device that can be used to commission, configure, program, and monitor other devices on a DeviceNet network.

Allen-Bradley 193-DNCT DeviceNet Configuration Terminal

Allen-Bradley 193-DNCT

Data Acquisition Test Equipment



The Fluke 2686A Data Acquisition System com-bine the best of lab precision with the rugged flexibility required in rapidly changing industrial applications. Up to 300V input isolation, 1600V transient overvoltage protection (2680A-PAI)

Fluke 2686A Data Acquisition System

Fluke 2686A

Data Acquisition Test Equipment



The Fluke 123 ScopeMeter is the rugged solution for industrial troubleshooting and installation applications. Up to 300V input isolation, 1600V transient overvoltage protection (2680A-PAI)

Fluke 123 ScopeMeter

Fluke 123

The Fluke 190-204/S ScopeMeter Test Tool is a four-channel portable scope, safety rated CAT III 1000V / CAT IV 600V.

Fluke 190-204/S ScopeMeter Test Tool

Fluke 190-204/S

The Fluke 192 ScopeMeter combines the high-est safety ratings and rugged portability with the high performance of a bench oscilloscope. Measures current to 4000A and voltage to 1kV at 200MHz


Fluke 192

The Fluke 196 ScopeMeter combines the high-est safety ratings and rugged portability with the high performance of a bench oscilloscope. Measure current to 4000A and voltage to 1kV at 200MHz


Fluke 196

Oscilloscopes



The Larkin Power Semiconductor Tester - Model M3K can test forward or reverse leakage currents at voltages up to 3300V - Designed for testing High Voltage Rectifier Diodes, SCRs/Thyristors, and Power Modules (including IGBTs and Darling-ton Transistors.

Larkin Power Components Power Semiconductor Tester - Model M3K

Larkin M3K



PowerComm PCA-4125

Oscilloscopes



A completely wireless dual display voltage indi-cator and phasing tool for voltages up to 43kV. It includes a pair of lightweight, single stick line-to-ground voltage indicators that communicate with each other wirelessly.

HD Electric Double Vision Dual Dis-play Wireless VoltageIndicating Phaser - DDVIP-40

HD Electric DDVIP-40

The Dranetz 314 Phase Angle Meter features com-parison of phase angles by current and current, voltage and voltage and voltage and current. It has dual current and voltage inputs with a max-imum input voltage of 230 VAC and a maximum current of 10 amperes.

Dranetz 314 Phase Angle Meter

Dranetz 314

The SMC PME-20-PH Phase Angle Meter is an instrument designed mainly as a phase angle meter, The instrument has two inputs, which are galvanically isolated: a voltage input up to 500 V RMS and current input up to 25 A RMS.

SMC PME-20-PH Phase Angle Meter

SMC PME-20-PH

Phase Angle Meters

A unique tester, the Bierer PD800W is an all-in-one kit for three-phase secondary systems, capac-itive test points, URD systems and overhead and transmission/substation systems,

Bierer PD800W Cordless Phasing Tester

Bierer PD800W





Baker ST112A

The Amprobe DM-II Pro Data Logger Recorder is a three phase power quality recorder used to maintain, diagnose and troubleshoot electrical systems. AC Current: 1 - 1000A (expandable to 3000A with optional CT’s) ±(1.0% Rdg + 3 LSD).


Amprobe DM-II Pro Data Logger Recorder


Amprobe DM-II

Amprobe DM-III

Power Quality Test & Power Recorder Equipment

A stand-alone instrument equipped with a self-powering system via its voltage inputs up to 1,000 V, the PEL 105 offers 5 voltage inputs and 4 current inputs, and compatible with a large num-ber of current sensors to make it easier to use

AEMC PEL 105 Power and Energy Logger

AEMC PEL 105





Baker ST124R

The Dent ElitePro Power Analyzer/Recorder is a complete solution for pinpointing electric usage and recording building performance metrics.

Dent ELITEpro Data Logger

Dent ELITEpro

The DRAN-VIEW software enables power profes-sionals to simply and quickly visualize and analyze power and energy monitoring data.

Dran-View Enterprise Software Key

Dran-View Enterprise

The Dran-View Hasp Key enables power profes-sionals to simply and quickly visualize and analyze power and energy monitoring data.

Dran-View Hasp Key

Dran-View Hasp




With high-speed sampling and data capture (1 microsecond/channel), the Dranetz PowerXplorer PX5 is an 8-channel workhorse that simultane-ously captures and characterizes thousands of parameters, using a range of standard and cus-tomizable operating modes.

Fluke 43B Single Phase Power Quality Analyzer performs the measurements needed to maintain power systems and troubleshoot power problems and diagnose equipment failures.

Dranetz PowerXplorer PX5 Power Monitor

Fluke 43B Single Phase Power Quali-ty Analyzer

Dranetz PowerXplorer PX5

Fluke 43B


Allows a user to connect the power supply of a power analyzer to a measurement phase up to 600VAC, eliminating the need for a dedicated 120VAC Outlet.

Dranetz PPA-PP1R-115 Phase Power Adapter

Dranetz PPA-PP1R-115

The Dranetz HDPQ Xplorer Power Quality Ana-lyzer is a PQ monitoring system, and offers high speed transient capture capabilities.

Dranetz HDPQ Xplorer Power Quality Analyzer

Dranetz HDPQ Xplorer



Fluke’s 1735 Three-Phase Power Quality Logger is Fluke's most versatile multi-purpose power quality and energy analyzer on the market for the price and is the ideal power meter for conducting energy studies and basic power quality logging.

Fluke 1735 Three-Phase Power Quali-ty Logger

Fluke 1735

Record three-phase power quality and monitor for power quality disturbances with the Fluke 1750 Three Phase Power Recorder and the Fluke Power Analyze software.

Fluke 1750 Three Phase Power Recorder

Fluke 1750


The Fluke 435 Power Quality and Energy Analyzer is a Power Quality analyzer that can monetize the cost of energy waste due to poor power quality, and offers a safety rating of: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.

Fluke 435 Power Quality Energy Analyzer

Fluke 435

The Fluke 434 Energy Analyzer is the ideal tool for advanced energy logging and energy monetiza-tion, identifying the most energy-wasteful areas of your facility, and offers the highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.

Fluke 434 Energy Analyzer

Fluke 434



The Fluke T5-1000 Voltage, Continuity and Cur-rent Tester is a troubleshooting tool that checks voltage, continuity and current. Displays resist-ance to 1000 Ω.

Fluke T5-1000 Voltage, Continuity and Current Tester

Fluke T5-1000

The Hioki 3196 Power Quality Analyzer supports single-phase 2-wire, single-phase 3-wire, three-phase 3-wire and three-phase 4-wire systems.

Hioki 3196 Power Quality Analyzer

Hioki 3196

Measure all waveforms of power, harmonic, and error events simultaneously with the Hioki PW3198 Power Quality Analyzer. Maximum 6000V transient overvoltage up to 700kHz

Megger Power DB Hardware Key Acceptance & Maintenance Test Data Management Software (PowerDB) allows you to record and maintain field test results.

Hioki PW3198 Power Quality Analyz-er

Megger Power DB Hardware Key

Hioki PW3198

Megger Power DB




The RxMS Cx Monitor is a power quality monitor adapted specifically for the needs of a commis-sioning agent. The monitor gathers all of the voltage and current data required for all of the commissioning tests as well as provide a means for also gathering wireless or DC voltage for over one hundred (100) locations.

RxMS Cx Monitor

RxMS Cx Monitor




Megger MIT430-TC2

Measures voltage, current, KW, KVA, KVAR, true power factor, displacement power factor, KWh, Hz, elapsed and estimated cost, duty cycle.

PowerSight PS3550 Power & Energy Analyzer

PowerSight PS3550



The Hukseflux I-V400 Peak Performance Analyz-er is intended for single module IV curve trace analysis, including additional single module and string system performance parameters up to 1000V / 10A.

Hukseflux I-V400 Peak Performance Analyzer

Hukseflux I-V400

Solar Monitoring Equipment


www.protecequip.com


www.protecequip.com

PROCESS INSTRUMENTATION & CONTROLS TEST

EQUIPMENT

The Druck DPI 740 Precision Barometer provides outstanding capabilities in a handheld package. The fundamental sensor technology employed within the Druck DPI740 is the Druck resonant pressure transducer (RPT). This vibrating element sensor provides accuracies of ±0.004 inHg (±0.15 mbar)

Druck DPI 740 Precision Barometer

Druck DPI 740


Barometers


The General Resistance DA-RTD-200 Decade Box offers GR's exclusive "no adder accuracy" and is the right unit for the job in a wide range of appli-cations. Its absolute accuracy of ±0.020/o over its entire range of 20· 1121.lQ ohms.

General Resistance DA-RTD-200Decade Box

General Resistance DA-RTD-200

Prime Technology RTD-100 Simulator provides an absolute accuracy of ± 0.005% over its entire resistance range.

Prime Technology RTD-100 Simulator

Prime Technology RTD-100

PROCESS INSTRUMENTATION & CONTROLSTEST EQUIPMENT

Transcat 7010T RTD Simulator is used in place of RTDs, then test, analyze, or calibrate the remain-ing instruments precisely and quickly. Gradu-ations are in steps of 1 milliohm. The absolute setting accuracy of ±0.01% or ±0.005% applies over the entire range.

Transcat 7010T RTD Simulator

Transcat 7010T

Used for testing and calibration, the main func-tion of the AEMC BR07 Decade Box is to create a resistance or capacitance with a specific value by using a combination of the rotary decade switch-es, and is equipped with Ø 4mm safety terminals for connection.

AEMC BR07 Decade Box

AEMC BR07

Decade Box


Ametek T-620 3000 PSI Hydraulic Hand Pump is small, lightweight and portable. The Ametek T-620 3000 PSI Hydraulic Hand Pump features a transparent reservoir to easy view of the test fluid.

The Beamex PGM 300 PSI Hand Pump is a hand-operated pressure calibration pump that uses air as its pressure medium. Output pressure: 0 to 20 bar/0 to 300 psi.

Portable hydraulic pumps provide robust and reli-able pressure generation up to 10,000 psi.

Ametek T-740 200 PSI Pneumatic Hand Pump is capable of generating test pressures up to 200 psi (20.6 bar), and is ideal for pressure instrument calibration, can be hand-operated in the field, or mounted on a test stand in the instrument shop.

Ametek T-620 3000 PSI Hydraulic Hand Pump

Beamex PGM 300 PSI Hand Pump

GE SI Pressure HTP1 10000 PSI Hydraulic Hand Pump

Ametek T-740 200 PSI Pneumatic Hand Pump

Ametek T-620

Beamex PGM

GE SI Pressure HTP1

Ametek T-740


Hand Pumps


Pneumatic hand pump provides -28 in Hg Vacu-um to 600 psi.

GE SI Pressure TP1-40 - 600 PSI Pneumatic Hand Pump

GE SI Pressure TP1-40

The diaphragm gas sampling pumps from KNF are based on a simple principle - an elastic dia-phragm, fixed on its edge, moves up and down its central point by means of an eccentric.

KNF N726 Motorized Vacuum Pump

KNF N726

The Ralston APGO-0000 300 PSI Pneumatic Hand Pump Without Gauge is a high pressure pump with an integral test gauge fitting.

Ralston APGO 300 PSI Pneumatic Hand Pump

Ralston APGO

Ralston DPPV Low Pressure and Vacuum Hand Pump generates either a vacuum or a pressure for calibrating low pressure or vacuum instru-mentation using an external pressure calibrator. Generate either 125 psi (8.6 bar) pressure or 23 InHg (584 mm Hg) vacuum with the same pump.

Ralston DPPV Low Pressure and Vacuum Hand Pump

Ralston DPPV


Hand Pumps


The Ralston XHGV 5000 PSI Hydraulic Hand Pump is a pressure source and gauge in one hand.

The Transcat 6215P 150 PSI Pressure Pump is a portable pressure source that generates up to 145 psig/10 bar. Coarse and fine adjustments provide resolution to 0.001 psig.

The Transmation 2000PV Universal Hand Pump is a hand pump hydraulic with pressure to 10,000 PSI, and a pneumatic vacuum with pressure to 600 PSI, Vacuum to 28.5 “Hg, and “H2O Range fine control.

The Transcat 23622P 600 PSI Transmation Pneu-matic Hand Pump can switch between vacuum and pressure with the press of a button.

Ralston XHGV 5000 PSI Hydraulic Hand Pump

Transcat 6215P 150 PSI Pressure Pump

Transmation 2000PV Universal Hand Pump

Transcat 23622P 600 PSI Transma-tion Pneumatic Hand Pump

Ralston XHGV

Transcat 6215P

Transmation 2000PV

Transcat 23622P


Hand Pumps


The Transmation 4238P 600mm Vacuum Pump is a portable vacuum source that generates up to 600 mm/23" Hg. Coarse and fine adjustments provide resolution to 0.001 psig.

Transmation 4238P 600mm Vacuum Pump

Transmation 4238P


Hand Pumps







AEMC 1026

AEMC 5060



Amprobe DM-III

Megohmmeters



Fluke 1587/MDT FC





Megger 210415



Megger MIT40X



Megger MIT410

Megohmmeters



Megger BM15



Megohmmeters



Megger MIT525



Megger MIT485



Megger MIT520/2



Megger MIT430-TC2



Megohmmeters





Megger S1-554

Metrel 2077



Megger MIT1025



Megger MIT1525




Megohmmeters



Metrel 3200



Metrel 3103


The Altek 211 RTD Calibrator allows the user to simulate and read RTDs over the entire indus-trial temperature range. Switch between four Platinum 100, one Pt 1000, one Cu 10, two Ni RTD curves or OHMs ranges from 0.00 to 410.00 and 0.0 to 2010.0.

Altek 211 RTD Calibrator

Altek 211

ALTEK’s triple function 234 Signal Analyzer com-bines a self contained 0-24mA SOURCE, a 2-wire simulator and a large LCD digital readout in a single pocket sized instrument.

Altek 234 Signal Analyzer

Altek 234

The Altek 334 Loop Calibrator will check, calibrate and measure all your current signal instruments in a 4 to 20 milliamp DC loop.

Altek 334 Loop Calibrator

Altek 334

Switch between 14 T/C types or millivolts. High-ac-curacy and stability is achieved through Altek’s exclusive isothermal block. Make your connec-tions directly with thermocouple wires or with miniature thermocouple connectors.

Altek 422 Universal Thermocouple Calibrator

Altek 422

Multifunction & Process Calibrators



The Altek 941 Multi-Frequency Calibrator cali-brates your turbine meters, frequency counters, vibration systems, tachometers, vortex shedders, integrators and any other frequency devices in the shop, plant or field.

The Bacharach 125 Fyrite Pro Combustion Gas Analyzer measures carbon monoxide (CO), oxy-gen (O2), draft, differential pressure, ambient air temperature, stack temperature, and combustion air temperature, as well as calculating combus-tion efficiency, excess air, carbon dioxide (CO2),differential temperature, and CO air free.

The Bently Nevada TK3-2 Calibration Instrument simulates shaft vibration and position for cali-brating Bently Nevada monitors. The mechanical vibration signal from the TK3-2 can range from 50 to 254 µm (2 to 10 mils) peak-to-peak.

The Altek TechChek 820 Process Calibrator light-ens your load. It’s a cartload of test equipment in one test set.

Altek 941 Multi-Frequency Calibrator

Bacharach 125 Fyrite Pro Combustion Gas Analyzer

Bently Nevada TK3-2 Calibration Instrument

Altek TechChek 820 Process Calibra-tor

Altek 941

Bacharach 125 Fyrite Pro

Bently Nevada TK3-2

Altek TechChek 820



The Biosystems Multivision Gas Detector is a four-sensor gas meter that can be configured to meet a wide variety of requirements. The mul-ti-gas detector can use up to four independent sensors for oxygen, combustible gas, carbon monoxide, and hydrogen sulfide.

Biosystems Multivision Gas Detector

Biosystems Multivision

Druck DPI 600 300 PSI Pressure Calibrator meas-ures and displays pneumatic and hydraulic pres-sure applied to the test port or to an externally connected pressure sensor.

Druck DPI 600 300 PSI Pressure Calibrator

Druck DPI 600

The Druck UPS-II loop calibrator is an advanced handheld process calibrator tool. The Druck UPS-II Loop Calibrator can power (24 VDC) and read 2-wire transmitters to perform field calibrations. Output currents are adjustable to a resolution of 10 microamps in both source and transmitter simulation modes.

Druck UPS-II Loop Calibrator

Druck UPS-II

Dwyer 1221 Slack Tube Manometer is as accurate as the finest laboratory “U” gauges and is suitable for total pressures to 100 psi - for determining ve-locity and static pressures, leakage, fan and blow-er efficiency, filter resistance, and gas pressures. Ideal wherever a portable, direct reading manom-eter is needed.

Dwyer 1221 Slack Tube Manometer

Dwyer 1221





The Extech 407117 Heavy Duty Mini Metal Vane Anemometer is an airflow meter with telescoping probe that easily fits into high temperature ducts.

The Extech 407764 Sound Level Meter is a type 2 meter with data logging memory for 128,000 re-cords plus PC interface and software. 30 to 130dB measurement range with ±1.5dB accuracy

The Fluke 707 Loop Calibrator is a high perfor-mance solution for calibration, repair and mainte-nance of current loops. mA sourcing, simulation and measurement. 0.015% accuracy and 0.001 mA resolution.

Extech 407736 Sound Level Meter is a sound level meter with ±1.5dB accuracy meets Type 2 stand-ards.

Extech 407117 Heavy Duty Mini Metal Vane Anemometer

Extech 407764 Sound Level Meter

Fluke 707 Loop Calibrator

Extech 407736 Sound Level Meter

Extech 407117

Extech 407764

Fluke 707

Extech 407736



Calibrate and test pressure devices quickly and easily with the Fluke 718-100G Pressure Calibrator. -12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa).

Fluke 718-100G Pressure Calibrator

Fluke 718-100G

Use the Fluke 725 Multifunction Process Calibra-tor to test and calibrate almost any process pa-rameter. Measure and source mA, volts, tempera-ture (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.

Fluke 725 Multifunction Process Calibrator

Fluke 725

The Fluke 743B Documenting Process Calibrator does the work of several tools – sourcing, simu-lating and measuring pressure, temperature, and electrical signals in one rugged, hand-held de-vice.

Fluke 743B Documenting Process Calibrator

Fluke 743B




The Fluke 744 Documenting Process Calibrator does the work of several tools - sourcing, simulat-ing and measuring pressure, temperature, and electrical signals in one rugged, hand-held de-vice.

Fluke 744 Documenting Process Calibrator

Fluke 744



A multi-functional documenting calibrator, the Fluke 754 Documenting Process Calibrator (DPC) can be used for more than just calibrating in-struments, it also can be utilized to troubleshoot problems or to run routine maintenance.

Fluke 754 Documenting Process Calibrator

Fluke 754




The Fluke 787 ProcessMeter combines a DMM and a loop calibrator in one rugged, handheld tool, in one device.


Fluke 787

A handheld, battery-operated tool for measuring electrical parameters, supplying steady or ramp-ing current to test process instruments, the Fluke 789 ProcessMeter provides a > 24 V loop power supply. It has all the features of a digital multime-ter, plus current output capability.


Fluke 789




The Gow-Mac 21-070 Gas Leak Detector is de-signed to locate leaks in gas or volatile liquid filled systems in laboratory and industrial locations.

The Fluke 922 Airflow Meter / Micromanometer makes airflow measurements easy by combining three tools: differential pressure, airflow, and into a single, rugged meter.

Gow-Mac 21-070 Gas Leak Detector

Fluke 922 Airflow Meter / Micromanometer

Gow-Mac 21-070

Fluke 922


The Leader LFG-1300S is a 2 MHz Function Gener-ator.

Leader LFG-1300S Function Genera-tor

Leader LFG-1300S

The Martel MC-1000 Multifunction Process Cali-brator provides the combination of a high accu-racy process calibrator and common DMM func-tions.

Martel MC-1000 Multifunction Pro-cess Calibrator

Martel MC-1000

The Meriam D1000IW Precision Manometer offers 0.25% rdg +5 digits (22°C) Includes effects of line-arity, hystersis and repeatability.

Meriam D1000IW Precision Manometer

Meriam D1000IW


The Honeywell GasAlertMicro Gas Detector warns of hazardous gas at levels above user-selectable alarm setpoints.

Honeywell GasAlertMicro Gas Detector

Honeywell GasAlertMicro



Meriam DP200I Portable Digital Manometer / Cal-ibrator offers dual (simultaneous) measurement and display capability, high accuracy and trace-ability to the N.1.S.T. uniquely qualify it for calibra-tion of electronic transducer I transmitters as well as mechanical gauges and recorders.

Meriam DP200I Portable Digital Manometer / Calibrator

Meriam DP200I


With the PIECAL 531 Loop Calibrator you can check, calibrate and measure all your current sig-nal instruments in a 4 to 20 milliamp DC loop.

The RKI GX-2001 Portable Gas Meter (LEL, 02, CO, H2S) is armed with standard features like auto calibration, data loggin and rechargeable Ni-MH batteries,

The Qualitrol KIT-013-1 Field Test Kit is a complete field test kit for performing confidence testing of QUALITROL 900/910 Rapid pressure rise relays (RPRRs).

PIE 531 Loop Calibrator

RKI GX-2001 Portable Gas Meter (LEL, 02, CO, H2S)

Qualitrol KIT-013-1 Field Test Kit

PIE 531

RKI GX-2001

Qualitrol KIT-013-1



The Transcat 4363T RTD Calibrator allows the user to simulate and read RTDs over the entire indus-trial temperature range.

Transcat 4363T RTD Calibrator

Transcat 4363T

Transmation 92 36 PSI Digital Pressure Calibrator features accuracy: ±0.05% of Rdg. and resolution 0.001 or 0.1 PSI.

Transmation 92 36 PSI Digital Pres-sure Calibrator

Transmation 92

The Universal Services GLI-01 Proximity Sensor Calibrator is used to test and calibrate installed proximity sensor systems.

Universal Services GLI-01 Proximity Sensor Calibrator

Universal Services GLI-01


The (Emerson) TESCOM 44-100 Pressure Regu-lator, low flow venting regulator offers a piston sensed design, control pressures of 6000-10,000 psig / 414-690 bar, a low torque setting and large handknob.

TESCOM (Emerson) 44-100 Pressure Regulator

TESCOM (Emerson) 44-100




The Adwel TPS-1 Three Phase Power Source pro-vides a convenient source for three phase testing when only a single phase line supply is available.

The BK Precision 1601 Regulated DC Power Sup-ply supplies 0 to 50 Volts at 0 to 2 amps, with a meter range switching that switches from 50V full scale to 25V full scale for better control at low voltages.

The Agilent (Keysight Technologies) N5750 DC Power Supply is a 750 W single-output program-mable DC power supply offers simple DC power applications, and provides stable output power, built-in voltage and current measurement, and output voltage and current from 150 V and 5 A..

Adwel TPS-1 Three Phase Power Source

BK Precision 1601 Regulated DC Pow-er Supply

Agilent N5750A DC Power Supply

Adwel TPS-1

BK Precision 1601

Agilent N5750A

Eaton Cutler Hammer Power Supply for Digitrip Test Sets is an auxiliary power module for Digitrip test sets

Eaton Cutler Hammer Power Supply for Digitrip Test Sets

ECH Power Supply

Power Supplies


The Keysight Technologies (Agilent) N5750 DC Power Supply is a 750 W single-output program-mable DC power supply offers simple DC power applications, and provides stable output power, built-in voltage and current measurement, and output voltage and current from 150 V and 5 A..

Keysight Technologies N5750 DC Power Supply

Keysight Technologies N5750

The PS-12/480 AC/DC Power Supply provides an adjustable voltage/current source to meet a wide variety of field and lab testing applications.

Magna PS-12/480 AC/DC Power Sup-ply

Magna PS-12/480


The AD-1 will provide AC and DC voltage in three nominal ranges from 0 to 120, 240, and 480 volts, at 1 kVA.

ETI AD-1 Portable AC DC Power Sup-ply

ETI AD-1

The AD-2 will provide AC and DC voltage in three nominal ranges from 0 to 120, 240, and 480 volts, at 2 kVA.

ETI AD-2 AC DC Variable Power Sup-ply

ETI AD-2

Power Supplies


The Staco 1520-3 480V, 3 Phase, 9A Variable Trans-former is a 9.5A 480V three-phase wye Variable Transformer with clockwise and counter clock-wise shaft rotation for voltage increase.

Staco 1520-3 480V, 3 Phase, 9A Variable Transformer

Staco 1520-3

The Transcat 21052E Portable Loop Power Supply with a 24 VDC power supply and a Load Range of 0 – 25mA.

Transcat 21052E Portable Loop Power Supply

Transcat 21052E


The Transcat 23232E 3A, 34V DC Power Supply offers selectable constant voltage or constant current modes.

Vanguard UPS-S2 (UPSS2) 300V DC, 240V AC 10A Power Supply offers current capability of 10A con-tinuous in all AC or DC voltage ranges.

Transcat 23232E 3A, 34V DC Power Supply

Vanguard UPS-S2 300V DC, 240V AC 10A Power Supply

Transcat 23232E

Vanguard UPS-S2

Power Supplies



The Ashcroft 1082A-030 test gauge is a used for test and validation, and is an ideal for satisfying most applications and installation requirements needing highly-reliable precision instruments. 30" HG - 0-30 PSI Analog Pressure Gauge

Ashcroft 1082A 0-30 PSI Test Gauge

Ashcroft 1082A 0-30

The Ashcroft 1082A-315 test gauge is a used for test and validation, and is an ideal for satisfying most applications and installation requirements needing highly-reliable precision instruments.3" HG - 3-15 PSI Analog Pressure Gauge


Ashcroft 1082A 3-15

The Ashcroft 1082A-3200 test gauge is a used for test and validation, and is an ideal for satisfying most applications and installation requirements needing highly-reliable precision instruments.3" HG 3- 60 PSI Analog Pressure Gauge


Ashcroft 1082A 3-60

The Ashcroft 1082A-3200 test gauge is a used for test and validation, and is an ideal for satisfying most applications and installation requirements needing highly-reliable precision instruments.3-200 PSI Analog Pressure Gauge


Ashcroft 1082A 3-200

Pressure Modules & Gauges



The Ashcroft 1082A-3600 test gauge is a used for test and validation, and is an ideal for satisfying most applications and installation requirements needing highly-reliable precision instruments.3-600 PSI Analog Pressure Gauge

The Ashcroft 1082A-455000 test gauge is a used for test and validation, and is an ideal for satisfy-ing most applications and installation require-ments needing highly-reliable precision instru-ments.4.5-5000 PSI Analog Pressure Gauge

The Ashcroft 1082A-410K test gauge is a used for test and validation, and is an ideal for satisfying most applications and installation requirements needing highly-reliable precision instruments.4-10K PSI Analog Pressure Gauge

The Ashcroft 1082A-451500 test gauge is a used for test and validation, and is an ideal for satisfy-ing most applications and installation require-ments needing highly-reliable precision instru-ments.4.5" HG 4.5 -1500 PSI Analog Pressure Gauge


Ashcroft 1082A 4.5-5000 PSI Test Gauge

Ashcroft 1082A 4-10K PSI Test Gauge

Ashcroft 1082A 4.5-1500 PSI Test Gauge

Ashcroft 1082A 3-600

Ashcroft 1082A 4.5-5000

Ashcroft 1082A 4-10K

Ashcroft 1082A 4.5-1500



The Crystal XP2I 100 PSI Pressure Test Gauge is an ultra rugged, intrinsically safe, digital test gauge with 0.1% of reading accuracy.

Crystal XP2I 100 PSI Pressure Gauge

Crystal XP2I 100

The Crystal XP2I 500 PSI Pressure Gauge is an ultra rugged, intrinsically safe, digital test gauge with 0.1% of reading accuracy.

Crystal XP2I 500 PSI Pressure Gauge

Crystal XP2I 500

The Crystal XP2I 5,000 PSI Pressure Gauge is an ultra rugged, intrinsically safe, digital test gauge with 0.1% of reading accuracy.

Crystal XP2I 5,000 PSI Pressure Gauge

Crystal XP2I 5,000

The Crystal XP2I 3,000 PSI Pressure Gauge is an ultra rugged, intrinsically safe, digital test gauge with 0.1% of reading accuracy.

Crystal XP2I 3,000 PSI Presssure Gauge

Crystal XP2I 3,000





The Fluke 700P00 Pressure Module displays pres-sure readings in any of 10 different pressure units you specify in the calibrator setup.0 to 1.000 in H2O

Fluke 700P02 Differential Pressure Module dis-plays pressure readings in any of 10 different pres-sure units you specify in the calibrator setup. 0 to 1.0000 psi

Fluke 700P03 Pressure Module displays pressure readings in any of 10 different pressure units you specify in the calibrator setup. 0 to 5.0000 psi

The Fluke 700P01 Pressure Module displays pres-sure readings in any of 10 different pressure units you specify in the calibrator setup. 0 to 10.00 in H2O

Fluke 700P00 1 H20 Pressure Module

Fluke 700P02 1 PSI Pressure Module


Fluke 700P01 10 H20 Pressure Mod-ule

Fluke 700P00

Fluke 700P02

Fluke 700P03

Fluke 700P01





Fluke 700P04


Fluke 700P05 30 PSI Pressure Mod-ule

Fluke 700P05



Fluke 700P06



Fluke 700P07






Fluke 700P23 Pressure Module displays pressure readings in any of 10 different pressure units you specify in the calibrator setup.0 to 5.0000 psi



Fluke 700P08 1,000 PSI Pressure Module




Fluke 700P08

Fluke 700P23

Fluke 700P24

Fluke 700P22



Fluke 700P27 Gauge Pressure Module displays pressure readings in any of 10 different pressure units you specify in the calibrator setup.0 to 300.00 psi


Fluke 700P27

Fluke 700P29 Gauge Pressure Module displays pressure readings in any of 10 different pressure units you specify in the calibrator setup.0 to 3000 psi


Fluke 700P29

Fluke 700P31 Gauge Pressure Module displays pressure readings in any of 10 different pressure units you specify in the calibrator setup.0 to 10,000 psi


Fluke 700P31

Fluke 700PA5 Pressure Module displays pressure readings in any of 10 different pressure units you specify in the calibrator setup.0 to 30.000 psi

Fluke 700PA5 30 PSI Pressure Mod-ule

Fluke 700PA5





Fluke 700PA6 Pressure Module displays pressure readings in any of 10 different pressure units you specify in the calibrator setup.0 to 100.00 psi

Fluke 700PD3 Pressure Module displays pressure readings in any of 10 different pressure units you specify in the calibrator setup.5 to 5.0000 psi

Fluke 700PD4 Pressure Module displays pressure readings in any of 10 different pressure units you specify in the calibrator setup.-15 to 15.000 psi


Fluke 700PA6 100 PSI Pressure Module

Fluke 700PD3 5 PSI Pressure Module

Fluke 700PD4 15 PSI Pressure Mod-ule


Fluke 700PA6

Fluke 700PD3

Fluke 700PD4

Fluke 700PD2




Fluke 700PD5 30 PSI Pressure Mod-ule

Fluke 700PD5



Fluke 700PD6



Fluke 700PD7

Fluke 700PV4 Pressure Module displays pressure readings in any of 10 different pressure units you specify in the calibrator setup.0 to -15.000 psi

Fluke 700PV4 15 PSI Pressure Module

Fluke 700PV4





The Martel PI-10K 10,000 PSI Pressure Gauge combines the accuracy of digital technology with the simplicity of an analog gauge and achieve performance, ease-of-use, and a feature set un-matched in the pressure measurement world.

The (Emerson) TESCOM 44-100 Pressure Regu-lator, low flow venting regulator offers a piston sensed design, control pressures of 6000-10,000 psig / 414-690 bar, a low torque setting and large handknob.

The Rosemount 1151 Pressure Transmitter features zero shift of up to 1 in H2O (0.25 kPa). With liquid level diaphragm in vertical plane, zero shift of up to 1 inH2O (0.25 kPa). With liquid level diaphragm in horizontal plane, zero shift of up to 5 inH2O (1.25 kPa) plus extension length on extended units.

Martel PI-10K 10,000 PSI Pressure Gauge

TESCOM (Emerson) 44-100 10,000 PSI Pressure Regulator

Rosemount 1151 1 H20 Pressure Transmitter

Martel PI-10K

TESCOM (Emerson) 44-100

Rosemount 1151


The Fluke 750P27 300 PSI Pressure Module al-lows gage, differential and absolute pressure measurement with the Fluke 754 and 744 series Documenting Process Calibrators (DPC) and 725 Multifunction Process Calibrator (MPC) to meas-ure pressure.


Fluke 750P27


Transcat 23300P-30 0 PSI - 30 PSI Digital Pressure Gauge

Transcat 23300P-30 30 PSI Digital Pressure Gauge

Transcat 23300P-30



Transcat 23300P-50

Transcat 23300P-100 100 PSI Digital Pressure Gauge - 0-100 PSI


Transcat 23300P-100


Transcat 23300P-15 0 PSI -15 PSI Digital Pressure Gauge


Transcat 23300P-15



Transcat 23300P-200 0 PSI -200 PSI Digital Pres-sure Gauge


Transcat 23300P-200






Transcat 23300P-500

Transcat 23300P-750

Transcat 23300P-1000 1,000 PSI Test Gauge

Transcat 23300P-1000 1,000 PSI Test Gauge

Transcat 23300P-1000



The USG 3-30 3”, 30 PSIG Test Gauge combines high accuracy, rugged construction and portabili-ty for a wide range of field and production testing applications.

USG 3-30 3”, 30 PSIG Test Gauge

USG 3-30



USG 3-200


The UEI Static Pressure Test Kit provides a simple, timesaving alternative to U-tube pressure meas-urements. Use the UEI Static Pressure Test Kit to measure gas supply and draft pressures in resi-dential or light commercial properties.

UEI Static Pressure Test Kit

UEI Static Pressure Test Kit

Transmation PD1121 5 PSID Pressure Module fea-tures dual port, 5 psig, 100 ‘’ H2O and 0.07% Accu-racy

Transmation PD1121 5 PSID Pressure Module

Transmation PD1121





USG 3-300


The USG 3-1000 3”, 3000 PSIG Test Gauge com-bines high accuracy, rugged construction and portability for a wide range of field and produc-tion testing applications.


USG 3-1000

The USG 3-3000 3”, 3,000 PSIG Test Gauge com-bines high accuracy, rugged construction and portability for a wide range of field and produc-tion testing applications.

USG 3-3000 3”, 3,000 PSIG Test Gauge

USG 3-3000




The DILO 3-027-R002 SF6 Percentage Analyzing Device is easy to operate independent of the at-mospheric pressure and location.

DILO 3-027-R002

The DILO 3-033-R050 SF6 IR-Leak Detector pro-vides an easy to use and portable instrument that detects smallest SF6 concentration in air.

DILO 3-033-R050 SF6 IR-Leak Detec-tor

DILO 3-033-R050

SF6 Gas Test Equipment

This Leak Detection device features a digital sig-nal processing unit that permits for management of the circuitry and sensing tip signal.

DILO 3-033-R002 SF6 Gas Leak Detector

DILO 3-033-R002

DILO 3-027-R002 SF6 Percentage Analyzing Device

The SF6-LeakSpy allows for precise localization of leaks by searching the highest SF6 concentration, and is indicated in ppmv as well as by an audible signal.

DILO 3-033-R200 SF6-LeakSpy

DILO SF6-LeakSpy



The DILO 3-038-R032 SF6 Multi-Analyzer is a modular device which can be configured to test for moisture, decomposition and purity of SF6.

DILO 3-038-R032 SF6 Multi-Analyzer

DILO 3-038-R032

The DILO 3-037-R050 Moisture Analyzer is a stand-alone device designed to quickly and accu-rately measure the amount of moisture present with the tested SF6.

DILO 3-037-R050 Moisture Analyzer

DILO 3-037-R050


The DILO 3-038R-R303 Zero Emission SF6 Analyz-er is able to test SF6 purity (vol %), moisture con-tent, and byproducts (SO2).

DILO D-155-R016 SF6 service hose, 3/8” OD x 16’, rubber w/DILO self sealing female couplings on each end.

DILO 3-038R-R303 Zero Emission SF6 Analyzer

DILO D-155-R016 SF6 Service Hose

DILO 3-038R-R303

DILO D-155-R016



Regularly measuring the chemical composition of the gas in a circuit-breaker is needed to make sure the contaminants are within allowable toler-ances, and the WIKA GA10 SF6 Breaker Analyzer is the most time and cost effective instrument to do this.

WIKA GA10 SF6 Breaker Analyzer

WIKA GA10


The ION LCP-1-P HS SF6 Gas Detector is designed for the location, leak testing and measurement of sulfur hexafluoride (SF6) in high voltage electrical switchgear.

ION LCP-1-P HS SF6 Gas Detector

ION LCP-1-P HS

The DILO SF6 Cylinder Heating Blanket HB 120A is a thermostatically controlled heater blanket used to heat the lower part of an SF6 gas bottle to prevent the SF6 from freezing.

DILO SF6 Cylinder Heating Blanket HB 120A

DILO HB 120A

DILO SF6 Analyzer Adapter Kit is used to connect all DILO SF6 Gas Analyzers to most gas filled ap-paratuses.

DILO SF6 Analyzer Adapter Kit




The WIKA GA20 SF6 Moisture-Humiditor Analyzer is a cost effective way to determine the level of moisture (H2O) in SF6-filled equipment to secure the safe operation and prolonged lifetime of elec-trical equipment.

WIKA GA20 SF6 Moisture-Humiditor Analyzer

WIKA GA20




The Hart Scientific (Fluke) 275 Smart Commu-nicator is a hand-held interface that provides a common communication link to all Hart/Fluke-compatible, microprocessor-based instru-ments.

The Hart Scientific (Fluke) 375 FB Smart Commu-nicator Field Bus Enabled is a universal support for HART and FOUNDATION fieldbus devices.

The Honeywell STS103 Communicator is a bat-tery-powered device which establishes secure two-way communications between Honeywell Smart Transmitters and the user over the existing signal lines.

The Hart Scientific (Fluke) 375 Smart Communi-cator is a universal support for HART devices.

Hart Scientific (Fluke) 275 Smart Communicator

Hart Scientific (Fluke) 375 FB Smart Communicator Field Bus Enabled

Honeywell STS103 Communicator

Hart Scientific (Fluke) 375 Smart Communicator

Hart Scientific (Fluke) 275

Hart Scientific (Fluke) 375 FB

Honeywell STS103

Hart Scientific (Fluke) 375

Smart Communicators



Smart Communicators

The Relcom FBT-6 Foundation Fieldbus Monitor is used to examine a live Fieldbus network without interfering with its operation.

Relcom FBT-6 Foundation Fieldbus Monitor

Relcom FBT-6



The Fluke 9140 Dry Well Calibrator has a temper-ature range of 35°C to 350°C, and it reaches its maximum temperature in 12 minutes.

Fluke 9140 Dry Well Calibrator

Fluke 9140

The Ametek CTC-650A Compact Dry Block Tem-perature Calibrator is a fast dry-block that offers both interchangeable inserts, the MVI stability circuitry, and calibration software.

The Dickson SP100 Temperature and Humidity Data Logger is used to monitor temperature or temperature and humidity.

The Ametek Jofra CTC Compact Temperature Calibrator is a fast dry-block that offers both inter-changeable inserts, the MVI stability circuitry, and calibration software.

Ametek CTC-650A Compact Dry Block Temperature Calibrator

Dickson SP100 Temperature and Humidity Data Logger

Ametek Jofra CTC Compact Temperature Calibrator

Ametek CTC-650A

Dickson SP100

Ametek Jofra CTC

Temperature Test Equipment




The Hart Scientific (Fluke) 9100S-A Dry-Well Cali-brator can be used as a portable devise or bench-top temperature calibrator for calibrating ther-mocouple and RTD temperature probes.

The Hart Scientific (Fluke) 9140-A Dry-Well Cali-brator has a temperature range of 35 C to 350 C, and it reaches its maximum temperature in 12 minutes.

The Hart Scientific (Fluke) 9141-A Dry-Well Cali-brator does calibrations up to 650 °C, weighs only eight pounds, and heats up to 650 °C in only 12 minutes

The Hart Scientific (Fluke) 9102S Dry-Well Calibra-tor is a small portable device designed for quick on-site checks and calibration of thermocouple and RTD temperature probes.

Hart Scientific (Fluke) 9100S-A Dry-Well Calibrator

Hart Scientific (Fluke) 9140-A Dry-Well Calibrator

Hart Scientific (Fluke) 9141-A Dry-Well Calibrator

Hart Scientific (Fluke) 9102S Dry-Well Calibrator

Hart Scientific (Fluke) 9100S-A

Hart Scientific (Fluke) 9140-A

Hart Scientific (Fluke) 9141-A

Hart Scientific (Fluke) 9102S



The Vaisala HM34 Temperature / Relative Hu-midity Meter provides a fast and convenient way to accurately spot-check relative humidity and temperature.

Vaisala HM34 Temperature / Relative Humidity Meter

Vaisala HM34



www.protecequip.com


The Doble Universal Controller (DUC) is a rugged tablet computer powerful enough to operate Doble’s suite of high voltage test equipment and software solutions while being tough enough to withstand the rigors of electrical field testing.

The Empro Shunts B-1000-50 1000A 50Mv Shunt can be used in a busbar or cable application.

Doble Universal Controller

Empro Shunts B-1000-50 1000A 50Mv Shunt

Doble DUC

Empro Shunts B-1000-50


Controllers

Shunts


With voltage outputs going as high as 300V AC/ 400 V DC at continuous 150 VA, Doble F2253 is among the best single phase relay testers in the market.

Doble F2253 Single Phase Relay Test Set

Doble F2253



Doble F2500

The F2700 from Doble is a very popular device used for relay testing. It is a testing tool that deliv-ers high performance results and gives a voltage output of 300V AC

Doble F2700 High Quality Relay Test Set

Doble F2700

The ISA T-1000 Single Phase Relay Test Set is designed to give the commissioning engineers a multitasking and highly reliable testing tool.

ISA T-1000 Single Phase Relay Test Set

ISA T-1000


Single Phase Relay Test Equipment


The Megger SMRT1 Single-Phase Relay Test Sys-tem is a stand-alone unit that has the “smart” combination of high compliance voltage and high current.

The Enoserv RTS Relay Dongle Key contains the Relay Testing Software (RTS) byEnoserv.

The Megger SR-98 Single Phase Relay Test Set is a portable, self-contained unit, which provides continuously adjustable current and voltage out-puts, with phase shifting capability and harmonic output currents for testing a wide variety of pro-tective relays.

Megger SMRT1 Single-Phase Relay Test System

Enoserv RTS Relay Dongle Key

Megger SR-98 Single Phase Relay Test Set

Megger SMRT1

Enoserv RTS

Megger SR-98


Single Phase Relay Test Equipment

Testing Automation Software


The Doble F6150 Relay Testing System is used for testing protection relays and schemes, and is capable of performing both simple through the most complex tests.

Doble F6150 Relay Testing System

Doble F6150

The Doble F6150e Relay Testing System tests protection relays, schemes and assess protection system performance for analog testing of 1A and 5A protection devices.

Doble F6150e Relay Testing System

Doble F6150e

The Doble F6150SV Relay Testing System is used for testing protection relays and schemes, assess-ing protection system performance for analog testing of 1A and 5A protection devices.

Doble F6150SV Relay Testing System

Doble F6150SV


Use the Doble F6051 Time Synchronizer in combi-nation with the Doble F6150, F6150e and 6150SV to accept modulated or demodulated signals from station satellite clocks.

Doble F6051 Time Synchronizer

Doble F6051

Three Phase Relay Test Equipment


The Megger MPRT8430 Three Phase Protective Relay Test System is comprised of, The ‘Power Box’, The TouchView Interface (TVI), and AVTS Software.

Megger MPRT8430 Three Phase Protective Relay Test System

Megger MPRT8430


The Manta MTS-5000 Protective Relay Test Sys-tem is an all-in-one relay test system with a direct front panel interface for all functions.

Manta MTS-5000 Protective Relay Test System

Manta MTS-5000

The Manta MTS-5100 Protective Relay Test System is the ideal system for testing and calibrating pro-tective relays using traditional test techniques or applying realistic power system simulations.

Manta MTS-5100 Protective Relay Test System

Manta MTS-5100

The F6150sv tests IEC 61850-based systems at the process level and station level using both sam-pled values and GOOSE (Generic Object Oriented Substation Events) messages.

Doble F6150sv Relay Testing System (F6860 IEC61850 GSE Interface Module)

Doble F6150sv (F6860)



The Megger SMRT410 Multi-phase Relay Tester has the “smart” combination of high compli-ance voltage and high current output to test all electromechanical, solid-state and microproces-sor-based overcurrent relays.

Megger SMRT410 Multi-phase Relay Tester

Megger SMRT410


The The Megger PULSAR Universal Protective Re-lay Test System is a one-unit, modular system that lets you select the testing capabilities you need now and expand as your requirements change.

The Megger SMRT36 Three-Phase Protective Relay Test System is conceivably the smallest, lightest, highest output powered, complete three phase relay test system available.

The Megger MPRT8445 Three Phase Protective Relay Test System is a multipurpose, light-weight, field portable test set.

Megger PULSAR Universal Protective Relay Test System

Megger SMRT36 Three-Phase Protective Relay Test System

Megger MPRT8445 Three Phase Protective Relay Test System

Megger PULSAR

Megger SMRT36

Megger MPRT8445




The Mentor 12 is an advanced three-phase relay test set available for type and field testing of elec-tromechanical and digital protections of any kind, in traditional or IEC-61850 based substations.

SMC Mentor 12 Three Phase Relay Test Set

SMC Mentor 12

The Omicron CMC 356 Universal Relay Test Set and Commissioning Tool is the universal solution for testing all generations and types of protection relays.

Omicron CMC 356 Universal Relay Test Set and Commissioning Tool

Omicron CMC 356



www.protecequip.com


www.protecequip.com

SWITCHGEAR, CIRCUIT BREAKER, &

RECLOSER TEST EQUIPMENT

SWITCHGEAR, CIRCUIT BREAKER & RECLOSERTEST EQUIPMENT

Without interrupting power, the Amprobe AT-2000 Advanced Wire Tracer easily traces ener-gized or non-energized wires or cables buried behind walls up to 13’ (4 m) deep.

The Amprobe AT-2005-A Industrial Multipurpose Tracer not only has the ability to trace live wires, buried or hidden behind walls, up to 13 feet deep, without interrupting power.

The AT-2005 Advanced Tracing System combines both AC/DC into one versatile tool providing the ability to solve virtually all your tracing problems.

Amprobe AT-2000 Advanced Wire Tracer

Amprobe AT-2005-A Industrial Multi-purpose Tracer

Amprobe AT-2005 Wire Tracer

Amprobe AT-2000

Amprobe AT-2005-A

Amprobe AT-2005

The Amprobe AT-3000 Underground Cable Loca-tor for cable avoidance is made of rugged con-struction to ensure long life and reliability while the simple controls promote effective use with minimal training.

Amprobe AT-3000 Underground Ca-ble Locator

Amprobe AT-3000



The Amprobe AT-7020 Advanced Wire Tracer Kit includes the SC-7000 Signal Clamp, and utiliz-es Amprobe’s patented Smart Sensor feature to instantly display the location and orientation of energized wires in walls, floors, and ceilings.

Amprobe AT-7020 Advanced Wire Tracer Kit

Amprobe AT-7020


The Aquatronics EG 3000 Secondary Cable Fault Locator is a secondary cable fault / sheath fault locator, employing the most effective fault loca-tion electronics, plus many additional features for safety and operational convenience.

Aquatronics EG 3000 Secondary Ca-ble Fault Locator

Aquatronics EG 3000

The Amprobe AT-7030 Advanced Wire Tracer Kit includes a Signal Booster Rechargeable battery pack to increase transmitter signal strength and a signal clamp attachment for inducing a signal in wires without access to exposed conductors.Traces AC/DC Circuits from 0-600 V

Amprobe AT-7030 Advanced Wire Tracer

Amprobe AT-7030




The Doble TDR900 Circuit Breaker Test System is a precision instrument for testing all types of circuit breakers. It detects main contact and resis-tor switch timing errors for up to four breaks per phase with motion measurements, at a resolu-tion of 100 μs.

Doble TDR900 Circuit Breaker Test System

Doble TDR900

The Doble TDR9000 Circuit Breaker Test System is a state-of-the-art instrument designed to test all types of circuit breakers. It permits testing up to eight breaks per phase, for a total of 24 main contacts simultaneously.


Doble TDR9000

The Doble TDR9100 Circuit Breaker Test System is an easy-to-use circuit breaker test system for accurate performance measurements with the added flexibility to double or triple your useable channels. It provides the accuracy of a laboratory instrument, but is designed for durability in the field.


Doble TDR9100

The ABB Ekip Connect Secondary Injection Test Set is a software application for personal com-puters that interfaces with ABB low voltage cir-cuit-breakers equipped with compatible protec-tion releases.

ABB Ekip Connect Secondary Injec-tion Test Set

ABB Ekip

Circuit Breaker Timing and Motion Analyzers



The Doble TR3100 Circuit Breaker Timer / Analyzer ensures mechanical motion and contact perfor-mance of dead-tank circuit breakers.

Doble TR3100 Circuit Breaker Timer / Analyzer

Doble TR3100

The Doble TR3190 Linear and Rotary Transducer is for use in conjunction with the Doble TR3100 and Doble TDR9000 series units.

Doble TR3190 Linear and Rotary Transducer

Doble TR3190

The Fuji FLD22 Transduce is a small diameter sen-sor (2 MHz) with a pipe diameter range of 0.50 to 4.0 in, and a temperature range of -40 to 212°F.

Fuji FLD22 Transducer

Fuji FLD22

The Omicron CIBANO 500 Circuit Breaker Test System is a 3-in-1 system capable of testing all types of circuit breakers, medium-voltage or high-voltage circuit breakers with live and dead tank design.

Omicron CIBANO 500 Circuit Breaker Test System

Omicron CIBANO 500




The CT-7000 applies a test voltage of 35 Vdc to each of the contact channels thus allowing an analog to digital converter (A/D) to determine if a close, an open or an insertion resistor was the state of contact.

Vanguard CT-7000 Digital Circuit Breaker Analyzer

Vanguard CT-7000

The Vanguard CT-6500-6 6 Channel Circuit Break-er Timer / Analyzer is a microprocessor-based, digital time travel, circuit breaker analyzer.

Vanguard CT-6500-6 6 Channel Cir-cuit Breaker Timer / Analyzer

Vanguard CT-6500-6

The Vanguard CT-6500 Circuit Breaker Timer / Analyzer is a microprocessor-based, digital time travel, circuit breaker analyzer. The Vanguard CT-6500 Circuit Breaker Timer / Analyzer can fully analyze a utility circuit breaker’s performance by measuring: the contact time, stroke, velocity, over-travel, bounce-back and contact wipe.

Vanguard CT-6500 Circuit Breaker Timer / Analyzer

Vanguard CT-6500

Used to read and change the parameters of the SENTRON WL and SENTRON VL circuit-breakers.

Siemens Breaker Data Adapter Plus (BDA Plus)

Siemens BDA Plus




The Vanguard CT-7500 S2 Digital Circuit Breaker Timer / Analyzer is an easy to use, stand alone or computer-controlled, microprocessor-driven EHV circuit breaker analyzer.

Vanguard CT-7500 S2 Circuit Breaker Timer / Analyzer

Vanguard CT-7500 S2

The Vanguard DIGITMR Circuit Breaker Timer / Analyzer is a microprocessor-based, time-ver-sus-travel, circuit breaker analyzer.

Vanguard DIGITMR Circuit Breaker Timer / Analyzer

Vanguard DIGITMR

For use with Vanguard's line of digital circuit breaker analyzers, the Rotary Transducer RT-2 is used for measuring circuit-breaker contact stroke, velocity, over-travel, and bounce back.

Vanguard RT-2 Rotary Transducer

Vanguard RT-2

The Vanguard Doble Transducer Adapter can be used to interface any Doble travel transducer to a Vanguard circuit breaker analyzer.

Vanguard Doble Transducer Adapter 9084-UC

Vanguard Doble 9084-UC




For use with Vanguard's line of digital circuit breaker analyzers, the Vanguard ABB AHMA-8 Mechanism Transducer is used for measuring circuit-breaker contact stroke, velocity, over-travel, and bounce back.

Vanguard TR-HMA ABB AHMA-8 Transducer

Vanguard TR-HMA

For use with Vanguard's line of digital circuit breaker analyzers, the TR-2 Linear Transducer is used for measuring circuit-breaker contact stroke, velocity, over-travel, and bounce back.

Vanguard TR-2 10" Linear Transducer

Vanguard TR-2

For use with Vanguard's line of digital circuit breaker analyzers, the Rotary Transducer RT-1 with Magnetic Mount is used for measuring cir-cuit-breaker contact stroke, velocity, over-travel, and bounce back.

Vanguard RT-1 Rotary Transducer with Magnetic Mount

Vanguard RT-1

For use with Vanguard's line of digital circuit breaker analyzers, the TR-1 Linear Transducer is used for measuring circuit-breaker contact stroke, velocity, over-travel, and bounce back.

Vanguard TR-1 25" Linear Transducer

Vanguard TR-1




For use with Vanguard's line of digital circuit breaker analyzers, the Vanguard ABB AHMA-8 Mechanism Transducer is used for measuring circuit-breaker contact stroke, velocity, over-travel, and bounce back.

Vanguard TR-HMB ABB HMB Transducer

Vanguard TR-HMB




The Cosa portable dew point meter, model XPDM, is a battery operated, hand-held, hygrometer, de-signed for applications where quick and accurate dew point measurements have to be made.

The Vaisala DM70 Dewpoint Analyzer measures dew point temperature accurately over a wide measurement range.

Cosa XPDM Portable Dew Point Me-ter

Vaisala DM70 Dewpoint Analyzer

Cosa XPDM

Vaisala DM70

Dewpoint Analyzers




213protecequip.com Toll Free 844-Protec-0protecequip.com Toll Free 844-Protec-0


The AEMC 5600 10A Micro-Ohmmeter performs accurate, reliable low resistance measurements with test currents to 10A and resolution to 1mΩ.

AEMC 5600 10A Digital Micro-Ohmmeter with Kelvin Probes

AEMC 5600

The AEMC 6240 10A Micro-Ohmmeter is a rug-ged, 10 Amp, low resistance tester designed for both plant maintenance and field use. Utilizing a four-lead Kelvin method of testing, the AEMC 6240 10A Micro-Ohmmeter accurately measures very low resistance within 0.25%

AEMC 6240 10A Micro-Ohmmeter

AEMC 6240

With an output up to 10 Amps, the AEMC 6250 10A Micro-Ohmmeter is uniquely designed to conduct tests on both resistive and inductive material, with operator selection directly from the front panel.


AEMC 6250

The high-current AEMC 6290 200A Micro-Ohm-meter is a portable, microprocessor-controlled in-strument. It has optimized filters and protection for measurements in electrical substations.


AEMC 6290

Low Resistance Ohmmeters



The Megger MOM2 200A Microhmmeter is an innovative microhmmeter designed to measure the resistance of circuit breaker contacts, bus-bar joints and other high-current links. This product is designed with safety, ease of use and versatility in mind.

The Megger DLRO600 600A Digital Microhmme-ter is a versatile instrument that can provide test currents from 10 amps up to 600 amps subject to the load resistance and supply voltage.

The Megger DLRO10HD 10A Digital Low Resist-ance Ohmmeter is a Heavy Duty DLRO that can supply 10 amps of current at 250milliohms resist-ance (AVO DLRO).

The Megger 247001 10A Digital Low Resistance Ohmmeter (DLRO) is a highly accurate instru-ment that provides a simple, practical and relia-ble means of making low-resistance tests in the field up to 10 Amps.

Megger MOM2 200A Microhmmeter

Megger DLRO600 600A Digital Microhmmeter

Megger DLRO10HD 10A Digital Low Resistance Ohmmeter

Megger 247001 10A Digital Low Re-sistance Ohmmeter

Megger MOM2

Megger DLRO600

Megger DLRO10HD

Megger 247001




For those applications that demand a smooth dc current, the DLRO200-115 has extra filtering on the output to reduce mains frequency ripple and can drive 200 amps through a total current loop resistance of 11 milliohms.

Megger DLRO200-115 200A Digital Low Resistance Ohmmeter

Megger DLRO200-115

The Megger Ducter Digital Low Resistance Ohm-meter DLRO10 brings a high standard to low resistance measurement.

Megger DLRO10 10A Digital Low Resistance Ohmmeter

Megger Ducter

The Omicron CIBANO 500 Circuit Breaker Test System is a 3-in-1 system capable of testing all types of circuit breakers, medium-voltage or high-voltage circuit breakers with live and dead tank design.

Omicron CIBANO 500 Circuit Breaker Test System

Omicron CIBANO 500


The Raytech Micro Centurion II MC2 200A Preci-sion Micro Ohm Meter is a high precision, fully au-tomatic, microprocessor-based Micro Ohm meter for measuring very low resistance.

Raytech Micro Centurion II MC2 200A Precision Micro Ohm Meter

Raytech Micro Centurion II



The Raytech Micro Junior 10A Precision Micro Ohm Meter is designed for high degree of accura-cy to measure very low resistances.

Raytech Micro Junior 10A Precision Micro Ohm Meter

Raytech Micro Junior

Raytech Micro Junior 2 10A Digital Micro Ohm Meter was designed for high degree of accuracy to measure very low resistances. It is battery op-erated with a lithium-ion battery that allows over 2000 test measurements with 10A output without recharging.

The Vanguard Auto-Ohm 200 S3 200A Mi-cro-Ohmmeter is Vanguard’s fourth generation, microprocessor-based, true DC micro-ohmmeter. It is designed for testing EHV circuit-breaker con-tact resistances, bushing contact joints, welding joints, or for any low-resistance measuring appli-cation.

The Vanguard Auto-Ohm 100 100A Micro-Ohm-meter features microprocessor-controlled meas-uring of very low resistances ranging from 1 micro-ohm to 300 milli-ohms with high accuracy.

Raytech Micro Junior 2 10A Precision Micro Ohm Meter

Vanguard Auto-Ohm-200 S3 200A Micro-Ohmmeter

Vanguard Auto-Ohm 100 100A Micro-Ohmmeter

Raytech Micro Junior 2

Vanguard Auto-Ohm-200 S3

Vanguard Auto-Ohm 100







AEMC 1026

AEMC 5060



Amprobe DM-III

Megohmmeters



Fluke 1587/MDT FC





Megger 210415



Megger MIT40X



Megger MIT410

Megohmmeters



Megger BM15



Megohmmeters



Megger MIT525



Megger MIT485



Megger MIT520/2




Megger MIT430-TC2


Megohmmeters





Megger S1-554

Metrel 2077



Megger MIT1025



Megger MIT1525




Megohmmeters



Metrel 3200




Metrel 3103


Model Number Pieces Largest

Breaker 1

Input Voltage, Single Phase

Max. Output

Through a Breaker 2

Shipping Weight 3

Multi-Amp MS-1 1 100 A 120 Vac 500 A 45 lbs.

Megger MS-2 1 125 A 120 Vac 600 A 45 lbs.

Megger MS-2A 1 125 A 120 Vac 750 A 45 lbs.

Vanguard MCCB-250 1 125 A 120 Vac 750 A 55 lbs.

Megger CB-832 1 225 A 120 Vac 1,800 A 104 lbs.

Omicron CP CB2/CPC 100 5 250 A 120 or 240

Vac 2,000 A 200 lbs.

Megger CB-845 2 500 A 208 or 240

Vac 5,000 A 280 lbs.

1 Largest recommended breaker size that the unit can effectively test. This is based on maximum output current available from the test set for both time-delay and instantaneous trip settings.2 This is the maximum rated output into a circuit breaker.3 Estimated pallet weight includes test leads and all pieces strapped to single pallet.4 Available with 480 Vac input only.5 Available with 240 Vac input only.

Primary Current Injection Test Equipment Selection Guide



Model Number Pieces Largest

Breaker 1

Input Voltage, Single Phase

Max. Output

Through a Breaker 2

Shipping Weight 3

ETI PI-800 2 800 A 120 or 240 Vac 8,000 A5 275 lbs.

ETI PI-1600B 3 1,600 A 240 or 480 Vac 16,000 A 385 lbs.

Megger ODEN AT 5 200 A 480 Vac 21,900 A 400 lbs.

ETI PI-4000 2 4,000 A 208/240 or 480 Vac 40,000 A 1,200lbs.

ETI PI-5000 2 4,000 A 480 Vac 40,000 A4 1,200lbs.

ETI PI-6000 1 6,000 A 208 / 240 or480 Vac 60,000 A 1,150lbs.

Megger DDA-1600 3 1,600 A 480 Vac 19,200 A 330 lbs.

Megger DDA-6000 1 6,000 A 480 Vac 60,000 A 1,200 lbs.

Primary Current Injection Test Equipment Selection Guide



The ETI PI-1600B High Current Test Set for prima-ry current injection testing, incorporates modular design and flexibility to provide unequaled capa-bility in a portable package.

ETI PI-1600B High Current Test Set

ETI PI-1600B

ETI PI-4000 High Current Test Set is a versatile and technologically advanced primary injection test set capable of testing circuit breakers up to 4000 amperes frame size.

ETI PI-4000 High Current Test Set

ETI PI-4000

The ETI PI-800 Portable Circuit Breaker Test Set incorporates modular design and flexibility to pro-vide unequaled capability in a portable package.

ETI PI-800 Portable Circuit Breaker Test Set

ETI PI-800

The ETI Circuit Breaker Test Stabs System is an adjustable stab system for use with high-current circuit breaker test sets when testing numerous types of circuit breakers, reducing testing time on large jobs with multiple breakers by as much as 30%.

ETI Circuit Breaker Test Stabs System

ETI Stabs System

Primary Current Injection Test Equipment



The ETI PI-5000 High Current Test Set, for primary current injection testing, is a two-piece enclosure that increases maneuverability and permits low-ering into shafts and manholes.

ETI PI-5000 High Current Test Set

ETI PI-5000

The ETI PI-6000 Primary Circuit Breaker Test Set is a versatile and technologically advanced pri-mary injection test set capable of testing circuit breakers up to 6000 amperes frame size.

ETI PI-6000 Primary Circuit Breaker Test Set

ETI PI-6000

The Megger CB-832 High Current Test Set is a self-contained test set that incorporates a varia-ble high-current output and appropriate control circuitry.

Megger CB-832 High Current Test Set

Megger CB-832

The Megger CB-360-DC/CB-120-DC DC Circuit Breaker Test Sets are mobile, high-current test sets designed specifically for testing DC circuit breakers.

Megger CB-360-DC/CB-120-DC DC Circuit Breaker Test Sets

Megger CB-360-DC/CB-120-DC




The Megger MS-2 Circuit Breaker and Overload Relay Test Set is capable of testing the time-delay characteristics of motor overload relays and mold-ed-case circuit breakers rated up to 125 amperes.

Megger MS-2 Circuit Breaker and Overload Relay Test Set

Megger MS-2

Ideal for testing low-voltage breakers rated to 1600-ampere frame size, the Megger DDA-1600 Circuit Breaker Tester features the Model DDA-1 Digital Data Acquisition Instrumentation and Control System.

Megger DDA-1600 Circuit Breaker Tester

Megger DDA-1600

The Megger DDA-6000 Universal Circuit Breaker Test Set is designed specifically to test low-volt-age power and molded-case circuit breakers equipped with thermal, magnetic or solidstate trip devices.

Megger DDA-6000 Universal Circuit Breaker Test Set

Megger DDA-6000

Megger CB-845 High Current Test Set for testing circuit breakers rated up to 500 amperers.

Megger CB-845 High Current Test Set

Megger CB-845



Megger ODEN AT is designed for primary injec-tion testing of protective relay equipment and circuit breakers, and can also be used to test the turns ratio of current transformers and for other applications that require high variable currents.


Megger ODEN AT Primary Current Injection Test System

Megger ODEN AT

With a patented circuit consisting of a continu-ously variable auto-transformer, which supplies a MULTI-AMP output transformer, the Multi-Amp MS-1 Overload Relay and Circuit Breaker Test Set allows for easy control of output current.

Multi-Amp MS-1 Overload Relay and Circuit Breaker Test Set

Multi-Amp MS-1

The Multi-Amp (Megger) MS-2 Circuit Breaker Test is a self-contained test set that incorporates a variable high-current output and appropriate control circuitry.

Multi-Amp (Megger) MS-2 Circuit Breaker Test Set

Multi-Amp (Megger) MS-2

The Megger MS-2A Circuit Breaker and Overcur-rent Relay Tester is used around the world by sev-eral thousand utility companies, industrial plants and electrical service organizations.

Megger MS-2A Circuit Breaker and Overcurrent Relay Tester

Megger MS-2A




Phenix Technologies’ HC-1 High Current Test Set provides a short duration output through a typi-cal molded-case circuit breaker when an instan-taneous trip element must be tested.

Phenix HC-1 High Current Test Set

Phenix HC-1



Omicron CPC 100

The output current of the Omicron CPC 100 can be increased up to 2000 A using the Omicron CP CB2 Accessory to the CPC 100 for Current Re-quirements Up to 2000 Acurrent amplifier.

Omicron CP CB2 Accessory to the CPC 100 for Current Requirements Up to 2000 A

Omicron CP CB2This unit must be used in combination with the Omicron CPC 100.




The Vanguard MCCB-250 Circuit Breaker Tester is a programmable, high-current source designed specifically for testing molded-case circuit break-ers, thermal magnetic and solid-state overload motor-protection relays.

Vanguard MCCB-250 Circuit Breaker Tester

Vanguard MCCB-250




The Omicron RCP1 19-Pin Recloser Control Cable Package is as an accessory to CMC 356 for com-prehensive testing of 19-pin style (control-pow-ered) recloser controls.

Omicron RCP1 19-Pin Recloser Con-trol Cable Package

Omicron RCP1

The Omicron RST1 14-Pin Recloser Control Cable Package serves as an accessory to CMC 356 for simple and comprehensive testing of standard 14-pin style recloser controls.

Omicron RST1 14-Pin Recloser Control Cable Package

Omicron RST1

The Omicron RVT1 32-Pin Recloser Control Cable Package is an accessory to CMC 356 for simple and comprehensive testing of G&W / Thomas & Betts 32-pin style recloser controls.

Omicron RVT1 32-Pin Recloser Con-trol Cable Package

Omicron RVT1

Recloser Control Test Equipment

The Cooper Power Systems Type MET Electronic Recloser Control Tester is designed specifically for testing Type ME Form 2, Form 3, Form 3A, Form 4A, Form 4C, Form 4D, Form 5, Form 6, Types FX, FXA, and FXB controls.

Cooper Power Systems Type METElectronic Recloser Control Tester

Cooper Power Systems Type MET



A universal recloser control analyzer, the Zensol Recloser Control Analyzer - GEN-6 is designed to test all types of recloser cabinet controllers.

Zensol Recloser Control Analyzer - GEN-6

Zensol GEN-6

Recloser Control Test Equipment



Manufacturer Trip Unit / Circuit Breaker Reference Test Set

ABB Power Shield - Type I-T-E Breakers K-600 thru K4000 504

ABB Power Shield - Type LSS Solid State Trip Device for LK Breakers 505

ABB Micro Power Shield (MPS) 606

ABB Micro Power Shield (MPS) 607

ABB Micro Power Shield (MFS-C and MPSC-2000) BTSB

ABB SACE, ALL, EMAX, EMAX DC, EMAX 2, ISOMAX, New EMAX, NEW EMAX VF, NEW MEGAMAX HF1-2-3-4, T7/T8/X1, TMAX, TMAX XT & X1

Ekip

ABB SACE PR11, PR12, PR113, PR121, PR122, PR123, PR212, PR222, PR223, TOP 25, EMAX

PR010/T

ABB ABB SACE S1, S2, AR1, PR1, PR111, PR112, PR113, PR121, PR122, PR123, PR231, PR232, PR331, PR332, PR333

TS3

Allen-Bradley 140G/140MG,-G, H, I, J, K, L, M & 140G-N, NS R 140G-ELTT

Carriere Carriere FB600ER RMS Trip Unit. STS100

Eaton-Cutler Hammer Seltronic, Series C, Digitrip RMS 310, SPB Digitrip RMS 210 1232C50G05

Eaton-Cutler Hammer Seltronic, Series C, Digitrip RMS 310, Digitrip RMS 310 Mining, SPB Digitrip RMS 210

1232C50G10 (STK2)

Eaton-Cutler Hammer Seltronic Test Kit 1287C56G02

Eaton-Cutler Hammer Amptector, Digitrip, RMS or Optim Trip Units, Digitrip RMS 500, 510,600, 610, 700, 800, 810 & 910 & Optim 750 & 1050 units

140D481G03

Eaton-Cutler Hammer Functional Test Kit - Digitrip 520, 520i, 520MC, 520MCi, 520V, 220+, 1150, 1150i, 1150v, 1150vi, 1150+, 1150i+, Series G & FD

70C1056

Eaton-Cutler Hammer Functional Test Kit - Digitrip 520, 520i, 520MC, 520MCi, 520V, 220+, 1150, 1150i, 1150v, 1150vi, 1150+, 1150i+, Series G & FD, NRX, 310+

70C1056G52

Eaton-Cutler Hammer Functional Test Kit - Digitrip 520, 520i, 520MC, 520MCi, 520V, 220+, 1150, 1150i, 1150v, 1150vi, 1150+, 1150i+, Series G & FD, NRX, 310+

70C1056G54

Eaton-Cutler Hammer OPTIMizer, Hand Held Programmer for Digitrip OPTIM Trip Units 550, 750 or 1050

7801C57

Eaton-Cutler Hammer DS or DSII Adapter for 140D481G03, PRAATM - RMS 500, 510,600, 610, 700, 800, 810 & 910 & Optim 750 & 1050 units

8779C02G03

Eaton-Cutler Hammer Magnum DS Breaker Digitrip Adapter for 140D481G03, DS-232 Digitrip CLIG 48v, Digitrip 220, 520, & 1150

8779C02G04

Eaton-Cutler Hammer Magnum Breaker Trip Unit Test Kit - Digitrip 520 Series, 1150 Series MTK-1000

Eaton-Cutler Hammer Magnum Breaker Trip Unit Test Kit - Digitrip 520 Series, 1150 Series MTK-2000

Eaton-Cutler Hammer Auxiliary Power Module for Digitrip Trip Units 510, 610, 810, 910 PRTAAPM

Eaton-Cutler Hammer Pow-R Break, Pow-R Trip, Pow-R Trip 7 SPBPTK

FEDERAL PIONEER USR and USRC Overcurrent Relay DDT-USRC

GE EntelliGuard EntelliGuard TU Trip Units GTUTK20

General Electric Entellisys Low Voltage Switchgear System DEH-233

General Electric Power Sensor and Power Sensor 1A PST1-1

General Electric ECS, SST and VersaTrip Model 2 TAKTS2

General Electric Power+, RMS-9, Epic, MicroVersaTrip Plus, MicroVersaTrip PM (TT & A, B or C Type) Spectra RMS

TVRMS2

General Electric MicroVersaTrip Programmers. TP4VT, TP9VT, T4VT, T9VT, TAVT, TP4VT20/25/30, & TP9VT20/25/30/40

TVTS1

Secondary Current Injection Test Equipment Selection Guide



Manufacturer Trip Unit / Circuit Breaker Reference Test Set

General Electric VersarTrip Pre-Model 2, including breaker types TJS, TKS, TPSS & THSS TTS-1

MadTest DS Magnum 4 in 1 Adapter. Substitute for 8779C02G03, 8779C02G04 & PR-TAAPM

DSM4i1

Merlin Gerin ME Test Kit (MASTERPACT STxx8, STRx8, COMPACT ST2x4, St205-3x5, STRx5, STCM2, STCM3, COMPACT NS STR22, STRx3

685834A

Merlin Gerin ME Test Kit (MASTERPACT STxx8, STRx8, COMPACT ST2x4, St205-3x5, STRx5, STCM2, STCM3, COMPACT NS STR22, STRx3

ME

Satin American ETC Trip Units ETC-PTS

Siemens Sentron WL, Sentron VL BDA Plus

Siemens VL ETU Breakers ELTPHB

Siemens LimiTrip, Static Trip I (Dual Trip) & Static Trip II PTS-3

Siemens LimiTrip, Static Trip I (Dual Trip) & Static Trip II, Static Trip III PTS-4

Siemens LimiTrip, Static Trip I (Dual Trip) & Static Trip III PTS-5

Siemens Auxilary Power Module for SB Breakers SBAPM

Siemens JD, LD, MD or PD, SB, & STD Breakers, Sensitrip III TS-31

Siemens WL Sentron Breakers, ETM Trip Units, ETU Trip Units (ETU7** Only) Westrip

Siemens RMS-2000, RMS-2007AF, RMS-2012AF WLTS

Square D by Schneider ME Test Kit (MASTERPACT STxx8, STRx8, COMPACT ST2x4, St205-3x5, STRx5, STCM2, STCM3, COMPACT NS STR22, STRx3

55391

Square D by Schneider UTS-3 Test Module, SE Module CBTM1

Square D by Schneider UTS-3 Test Module, ME-NE-PE Module CBTM3

Square D by Schneider UTS-3 Test Module, Series A: M-N-P-S Module CBTM4A

Square D by Schneider UTS-3 Test Module, Series B Module CBTMB

Square D by Schneider MICROLOGIC (MasterPact, PowerPact, Compact NS) Series 2.0, 3.0, 5.0, 6.0, 7.0 & ET Trip Units - S3395 Cable: Compact NS Breaker with STR Trip Units (STR22, STR23, STR43, STR53)

S33594

Square D by Schneider MICROLOGIC (MasterPact, PowerPact, Compact NS) Series 2.0, 3.0, 5.0, 6.0, 7.0 & ET Trip Units - S3395 Cable: Compact NS Breaker with STR Trip Units (STR22, STR23, STR43, STR53)

S33595

Square D by Schneider UTA Tester: Compact NSX 100-250, NSX 400-630, Micrologic 2.2M, 2.3M, 3.2, 3.3, 5.2, 5.3, 6.2, 6.3, Trip Units

TRV00910

Square D by Schneider MicroLogic Full Function Series B, Square D UTS-3 Test Set with Series B Module, NX Micrologic Series B

UTS3

Utility Relay Company Zero-Hertz DC Trip Unit B-290

Utility Relay Company AC Pro Trip Unit B-291

Utility Relay Company AC Pro MP Trip Unit B-291-MP

Utility Relay Company AC-PRO Microcontroller Based Trip Unit B-291-S

Utility Relay Company AC Pro and AC Pro II Trip Unit B-292

Westinghouse SCB II Breakers Operation Test Set 1255C48G02

Westinghouse Pow-R Break, Pow-R Trip, Pow-R Trip 7 SPBPTK



The ABB 504 Secondary Injection Test Set "POW-ER SHIELD" is a solid-state trip device used to pro-tect the power system against damage caused by overloads and faults.

The ABB 606 Secondary Injection Test Set is a tester specifically designed to test only Micro Powershield (Type MPS) solid state trip systems.

The ABB 505 Secondary Injection Test Set Pow-ershield unit is a solid state trip device used to protect the power system against damage caused by overload and faults.

ABB 504 Secondary Injection Test Set



ABB 504

ABB 606

ABB 505

The ABB 607 Secondary Injection Test Set is a Micro PowerShield (MPS-C) unit is a microproces-sor based solid state trip system which provides state-of the-art protection for power systems.


ABB 607

Secondary Current Injection Test Equipment


The ABB BTSB Secondary Injection Test Set is a bench-top Trip Simulator for Breakers (BTSB).

ABB BTSB Secondary Injection Test Set

ABB BTSB

The ABB PR010/T Secondary Injection Test Set is a device capable of performing the functions of testing, programming and reading parameters for the protection units equipping ABB SACE low-voltage circuit-breakers.


ABB PR010/T Secondary Injection Test Set

ABB PR010/T

The ABB TS3 Trip Unit Test Set is a testing device that verifys functionality on Low Voltage ABB SACE air circuit breakers electronic trip units, with one-phase secondary current injection.

ABB TS3 Trip Unit Test Set

ABB TS3

The ABB Ekip Connect Secondary Injection Test Set is a software application for personal com-puters that interface with ABB low voltage cir-cuit-breakers equipped with compatible protec-tion releases.

ABB Ekip Connect Secondary Injec-tion Test Set

ABB Ekip




Eaton Cutler Hammer 1232C50G05 Secondary Injection Test Kit for Seltronic and Series C Circuit Breakers.

Eaton Cutler Hammer 1232C50G05 Secondary Injection Test Kit

Eaton Cutler Hammer 1232C50G05

Eaton Cutler Hammer 1232C50G10 Secondary Injection Test Kit for Seltronic and Digitrip Units.

Eaton Cutler Hammer 1232C50G10 Secondary Injection Test Kit


The Allen-Bradley 140G-ELTT Trip Test Unit is a small hand-held device for testing G, R Frame Molded Case Circuit Breaker.

Allen-Bradley 140G-ELTT Trip Test Unit

Allen-Bradley 140G-ELTT

The Carriere STS100 Secondary Injection Test Set designed to functional test the DIGITAL 600 and FB600E/ER Trip Unit.

Carriere STS100 Secondary Injection Test Set

Carriere STS100



Eaton Cutler Hammer 1287C56G02 Secondary Injection Test Kit for Seltronic Trip Units

Eaton Cutler Hammer 1287C56G02 Secondary Injection Seltronic Test Kit


The Eaton Cutler Hammer 140D481G02 Second-ary Injection Test Set is used to test and verify the pickup levels and time delay settings of a break-er’s Trip Unit.


Eaton Cutler Hammer 140D481G02 Secondary Injection Test Set

Eaton Cutler Hammer 140D481G02

The Eaton Cutler Hammer 140D481G03 Second-ary Injection Test Set is used to test and verify the pickup levels and time delay settings of a break-er’s Trip Unit.

Eaton Cutler Hammer 140D481G03 Secondary Injection Test Set

Eaton Cutler Hammer 140D481G03

The Eaton Cutler Hammer Functional Test Kits 70C1056 and 70C1056G52 are handheld battery powered testers capable of testing trip elements for Digitrip family of Magnum power circuit breaker trip units.

Eaton Cutler Hammer 70C1056 Functional Test Kit

Eaton Cutler Hammer 70C1056




Eaton Cutler Hammer 7801C57 OPTIMizer Pro-grammer / Trip Test is used exclusively with the Digitrip Eaton Cutler Hammer 7801C57 OPTIM Trip Unit System.

Eaton Cutler Hammer 8779C02G03 DS / DS II Adaptor, will enable the 140D481G03 test set to test DS breakers with Digitrip trip units manufac-tured after May 1993.

Eaton Cutler Hammer 7801C57 OPTIMizer Programmer / Trip Test

Eaton Cutler Hammer 8779C02G03 DS / DS II Adaptor

Eaton Cutler Hammer 7801C57


The Eaton Cutler Hammer 70C1056G52 Circuit Breaker Test Set includes a handheld battery powered tester capable for testing trip elements for Digitrip family of Magnum power circuit breaker trip units.

Eaton Cutler Hammer 70C1056G52 Circuit Breaker Test Set


The Eaton Cutler Hammer 70C1056G54 Circuit Breaker Test Set includes a handheld battery powered tester capable for testing trip elements for Digitrip family of Magnum power circuit breaker trip units.

Eaton Cutler Hammer 70C1056G54 Circuit Breaker Test Set




The test kit adapter, style Eaton Cutler Hammer 8779C02G04 Magnum Adaptor, for the Magnum DS Digitrip Trip Units, converts the 11-pin banana plug on the test kit to a 14-pin plug.

The Eaton Cutler Hammer MTK1000 Magnum Trip Unit Test Kit is designed to be a user friendly upgrade from the previous Magnum trip unit test kit (140D481G03 plus 8779C02G04),

Eaton Cutler Hammer 8779C02G04 Magnum Adaptor

Eaton Cutler Hammer MTK1000 Magnum Trip Unit Test Kit


Eaton Cutler Hammer MTK1000

The Eaton Cutler Hammer MTK2000 Magnum Trip Unit Test Kit is used to test and verify the pickup levels and time delay settings of a break-er’s trip unit.


Eaton Cutler Hammer MTK2000 Magnum Trip Unit Test Kit

Eaton Cutler Hammer MTK2000

Eaton Cutler Hammer Power Supply Module is an auxiliary power supply module for Digitrip Trip Units When testing Digitrip Trip Units, either an auxiliary power supply module (PRTAAPM) will be required,

Eaton Cutler Hammer Power Supply Module (PRTAAPM)

Eaton Cutler Hammer PRTAAPM




The GE M-PRO Test Box is a must have when testing the health and configuration of the GE M-PACT Plus Breaker. The GE M-PRO Test Box is used as a means of powering up an M-PRO Plus Protection Relay - Electronic Trip Unit, simulating faults by secondary injection or for performing a forced trip of the breaker.

GE M-PRO Test Box

GE M-PRO

The GE EntelliGuard GTUTK20 Digital Test Kit is a lightweight, portable test instrument designed for field-testing of EntelliGuard TU Trip Units.

GE EntelliGuard GTUTK20 Digital Test Kit

GE EntelliGuard GTUTK20

Eaton Cutler Hammer (Westinghouse) SPBPTK Secondary Injection Test Set is used to test Pow-R breakers.

Eaton Cutler Hammer SPBPTK Sec-ondary Injection Test Set

Eaton Cutler Hammer SPBPTK

he Federal Pioneer DDT-USRC Field Test Unit is a battery powered portable test unit designed for the convenience of field testing of Type USR and USRC family of overcurrent relays.

FEDERAL PIONEER DDT-USRC Field Test Unit

FEDERAL PIONEER DDT-USRC




The General Electric (GE) DEH-233 Entellisys System Test Kit is a portable test instrument de-signed for field testing of the Entellisys Low Volt-age Switchgear System.

The General Electric (GE)TAKTS2 Secondary Injec-tion Test Set is a portable instrument designed for field testing the performance of solid-state overcurrent trip devices.

The General Electric (GE) PST1-1 Secondary Injec-tion Test Set is a portable unit designed to facili-tate on-site testing Power Sensor Trip Devices.

General Electric DEH-233 Entellisys System Test Kit

General Electric TAKTS2 Secondary Injection Test Set

General Electric PST1-1 Secondary Injection Test Set

General Electric DEH-233

General Electric TAKTS2

General Electric PST1-1




The General Electric (GE) TVRMS2 Secondary Injection Test Set is designed for field testing of RMS-9, Epic, Power+, MicroVersaTrip Plus, and MicroVersaTrip PM Trip Units.

General Electric TVRMS2 Secondary Injection Test Set

General Electric TVRMS2

The General Electric (GE) TVTS1 Secondary Injec-tion Test Set is a portable unit for the field testing of Micro-VeraTrip solid-state programmers.

General Electric TVTS1 Secondary Injection Test Set

General Electric TVTS1

The General Electric TTS-1 VersaTrip Circuit Break-er Test Set is a rugged, light weight, port able instrument designed to test the electronics pack-age used with VersaTrip circuit breakers.

General Electric TTS-1 VersaTrip Cir-cuit Breaker Test Set

General Electric TTS-1 VersaTrip

The MadTest Instruments DSM4i1 Adapter is an alternative adapter option that replaces the need for both the Eaton Cutler Hammer 8779C02G03 DS/DSII and Eaton Cutler Hammer 8779C02G04 Magnum adapters.

MadTest Instruments DSM4i1 Adapt-er

MadTest DSM4i1




Merlin Gerin 685836A Secondary Injection Test Set is used for testing ST and CM trip units.

Merlin Gerin 685836A Secondary Injection Test Set

Merlin Gerin 685836A

The Satin American ETC-PTS Secondary Injection Test Set works by producing a single phase signal simulating current sensor output.

Satin American ETC-PTS Secondary Injection Test Set

Satin American ETC-PTS

Merlin Gerin ME Test Kit Secondary Injection Test Set is used for field testing MASTERPACT® Circuit Breakers and COMPACT® Circuit Breakers ST, STR, and STCM Trip Units.

Merlin Gerin ME Test Kit Secondary Injection Test Set

Merlin Gerin ME

Used to read and change the parameters of the SENTRON WL and SENTRON VL circuit-breakers.

Siemens Breaker Data Adapter Plus (BDA Plus)

Siemens BDA Plus




The Siemens ELTPHB is a portable test kit that is a power supply for programming, trip test, and checking CT’s for Electronic Trip Units (ETU) on Siemens VL Breakers.

Siemens test set type PTS-3 is designed for test-ing the static overcurrent tripping systems used on the LA line of low voltage power circuit break-ers.

Siemens ELTPHB VL Portable Test Kit

Siemens PTS-3 Secondary Injection Test Set

Siemens ELTPHB

Siemens PTS-3

Siemens test set type PTS-4 is designed for test-ing the static overcurrent tripping systems used on the LA and RL line of low voltage circuit break-ers.


Siemens PTS-4

The Siemens PTS-5 Secondary Injection Test Set is designed for performing secondary injection test-ing of the Static Trip III (STIII) overcurrent tripping system utilized on the RL breaker.


Siemens PTS-5




The Siemens Auxiliary Power Module is an option offered for conducting a test on a Siemens’ Sys-tem Breaker (SB) Insulated Case Circuit Breaker.

Siemens SBAPM Auxiliary Power Module for SB Breakers

Siemens SBAPM

The Siemens TS-31 Universal test set is designed to be used with Type SJD6, SHJD6, SCJD6, SLD6, SHLD6, SCLD6, SM06, SHMD6, SCMD6, SND6, SHND6, SCND6, SPD6, SHPD6, SKMIII, SHKIII, SKPIII, SHPIII, ST06, SHTD6, SHHTD6, SB &STO Circuit Breakers.

Siemens TS-31 Secondary Injection Test Set

Siemens TS-31

The Siemens WLTS is a test device for WL Breaker Electronic Trip Units (ETU).

Siemens WLTS Secondary Injection Test Set

Siemens WLTS

The Siemens Westrip Amptector Adapter Plug as-sists with the testing of the RMS-2000 Program-mable Logic Controller.

Siemens Westrip Amptector Adapter Plug

Siemens Westrip Adapter




Square D by Schneider CBTM3 Module for the UTS3 Universal Test Set and is designed to per-form operational tests and diagnoses of Square D electronic trip circuit breakers, circuit breaker components and tripping functions.

Square D by Schneider CBTM1 Module for the UTS3 Universal Test Set and is designed to per-form operational tests and diagnoses of Square D electronic trip circuit breakers, circuit breaker components and tripping functions.

Square D by Schneider CBTM3 Mod-ule for UTS3 Universal Test Set

Square D by Schneider CBTM1 Mod-ule for UTS3 Universal Test Set

Square D by Schneider CBTM3

Square D by Schneider CBTM1

The Square D by Schneider 55391 (34547) ME Test Kit is a Full-Function Test Kit calibration unit, re-quiring a power upply of 110 or 240 Vac, 50/60 Hz (two-position selector).

Square D by Schneider 55391 ME Test Kit

Square D by Schneider 55391

Square D by Schneider CBTMB Adapter for the UTS3 Universal Test Set and is designed to per-form operational tests and diagnoses of Square D electronic trip circuit breakers, circuit breaker components and tripping functions.

Square D by Schneider CBTMB Adapter for UTS3 Universal Test Set

Square D by Schneider CBTMB




The Square D by Schneider UTS3 Secondary Injec-tion Test Set is designed to perform operational tests and diagnoses of Square D Micrologic Series B electronic trip units on circuit breakers.

Square D by Schneider UTS3 Secondary Injection Test Set

Square D by Schneider UTS3


CircuitBreaker

Circuit Breaker Series No.

Test Module

LE/LX 1B CBTMB

ME 1 &2 NA-Primary Inject Only

3 CBTM3

4 & 5 CBTM4A

5A CBTM4A

5B CBTMB

MX 4 & 5 CBTM4A

5B CBTMB

NE 1 CBTM3

2 & 3 CBTM4A

3A CBTM4A

3B CBTMB

NX 2 & 3 CBTM4A

3B CBTMB

CircuitBreaker

Circuit Breaker Series No.

Test Module

PE 1,2, & 3 NA-Primary Inject Only

4 CBTM3

5 & 6 CBTM4A

6A CBTM4A

6B CBTMB

PX 5 & 6 CBTM4A

6B CBTMB

SE 1 NA-Primary Inject Only

2 CBTM1

3 CBTM4A

3A CBTM4A

3B CBTMB

Square D by Schneider CBTM4A Module for the UTS3 Universal Test Set and is designed to per-form operational tests and diagnoses of Square D electronic trip circuit breakers, circuit breaker components and tripping functions.

Square D by Schneider CBTM4A Module for UTS3 Universal Test Set

Square D by Schneider CBTM4A




The UUtility Relay Co. B-291-S Secondary Injection Test Set for AC-PRO is a single phase test set spe-cifically designed for testing the operation of hte Utility Relay Co., AC-PRO microcontroller based trip units.

The Utility Relay Co. B-291-MP Secondary Injec-tion Test Set is a single-phase test set specifi-cally designed for testing the operation of the AC-PRO-MPTM microcontroller based trip units manufactured by Utility Relay Co.

Utility Relay Co. B-291-S Secondary Injection Test Set

Utility Relay Co. B-291-MP Secondary Injection Test Set

Utility Relay Co. B-291-S

Utility Relay Co. B-291-MP

Square D by Schneider TRV00910 UTA Test Set operates in one of two modes: In standalone mode (not connected to a computer), In online mode (connected to a computer with USB or Bluetooth

Square D by Schneider TRV00910 UTA Test Set

Square D by Schneider UTA

The Utility Relay Co. B-290 Secondary Injection Test Set is specifically designed for secondary in-jection testing of the ZERO-Hertz DC trip unit.

Utility Relay Co. B-290 Secondary Injection Test Set

Utility Relay Co. B-290




The Westinghouse (Cutler Hammer) SPBPTK Secondary Injection Test Set is used for testing Pow-R breakers.

Westinghouse SPBPTK Secondary Injection Test Set

Westinghouse SPBPTK

Westinghouse 1255C48G02 Secondary Injection Test Set for SCB II Breakers.

Westinghouse 1255C48G02 Second-ary Injection Test Set

Westinghouse 1255C48G02

The Utility Relay Co. B-292 Secondary Injection Test Set is a single-phase test set specifically designed for testing the operation of the AC-PRO and AC-PRO-II microcontroller based trip units manufactured by Utility Relay Co.

Utility Relay Co. B-292 Secondary Injection Test Set

Utility Relay Co. B-292



The Square D by Schneider S33595 Secondary Injection Test Set is a full function test kit that is designed to perform tests on Micrologic, NT and STR Trip units.

Square D by Schneider S33594 Secondary Injection Test Set

Square D by Schneider S33594

Trip Unit Type

Test Cable

Test Functions Inhibit Functions Trip Unit

Power Supply

Short-circuit Trip

Ground-fault Trip

Ground-fault In-

hibit

Thermal-Imaging Inhibit

Non- communicating

STR22, STR23, STR43

2-PinTest

Cable

STR53

ET 1.0, ET 1.0I, ET 1.0M

7-Pin Test

Cable

MICROLOG-IC 2.0,3.0 5.0

Communicating MICROLOG-IC 2.0A, 3.0A, 5.0A, 5.0P,5.0H

MICROLOG-IC 6.0A, 6.0P, 6.0H, 7.0A,7.0P, 7.0H




The Square D by Schneider S33595 Secondary Injection Test Set, a full function test kit designed to perform tests on Micrologic, NT and STR Trip units.

Square D by Schneider S33595 Secondary Injection Test Set

Square D by Schneider S33595

Trip Unit Type

Test Cable

Test Functions Inhibit Functions

AutomaticTrip

ManualTrip

Mechan-ical

Operation

ZSIFunction

Ground-fault

Inhibit

Thermal-Imaging Inhibit

Non- communicating

STR22ME, STR22GE, STR22SE, STR23SE, STR23SP, STR43ME

2-PinTest

Cable

STR53UP, STR53UE

ET 1.0, ET 1.0M

7-Pin Test

CableET 1.0I

MICRO-LOGIC 2.0,3.0 5.0

Communicating MICRO-LOGIC 2.0A, 3.0A, 5.0A, 7.0A

MICRO-LOGIC 5.0P, 5.0H, 7.0P, 7.0H

MICRO-LOGIC 6.0A, 6.0P, 6.0H






DILO 3-027-R002



DILO 3-033-R050



DILO 3-033-R002



DILO SF6-LeakSpy






DILO 3-037-R050



DILO 3-038-R032






DILO 3-038R-R303

DILO D-155-R016





WIKA GA10




ION LCP-1-P HS



DILO HB 120A








WIKA GA20




The VBT-60 is a microprocessor-based, portable, 60kV DC vacuum bottle tester.

Vanguard VBT-60 Vacuum Bottle Tester

Vanguard VBT-60

The Vanguard VBT-80 80kV DC Vacuum Bottle Tester is a microprocessor-based, portable, DC 80kV vacuum bottle tester.

Vanguard VBT-80 Vacuum Bottle Tester

Vanguard VBT-80

Vacuum Interrupters MAC-TS4 Magnetron At-mospheric Condition (MAC) Analysis Test Set (Vacuum Bottle Tester) is a rigid magnetic coil for the vacuum interrupter tester used for the testing of vacuum interrupters in GE PowerVac breakers in place without the need for disassembly.

Vacuum Interrupters MAC-TS4 Mag-netron Atmospheric Condition (MAC) Analysis Test Set

Vacuum Interrupters MAC-TS4

Used in conjunction with the Vacuum Interrupt-ers MAC-TS4 Magnetron Atmospheric Condition (MAC) Analysis Test Set to facilitate the testing of GE PowerVac Breakers without disassembly.

Vacuum Interrupters PowerVAC V1 Rigid Magnetic Coil

Vacuum Interrupters PowerVAC V1

Vacuum Bottle Test Equipment


www.protecequip.com


www.protecequip.com

TRANSFORMER,MOTOR, GENERATOR

DIAGNOSTIC TEST EQUIPMENT

The Adwel CTX-2000 1200V CT Test Set has been designed to test current transformers for Excita-tion, Saturation, Ratio and Polarity by comparing voltage.

The Megger CTER-91 Current Transformer Excita-tion, Ratio and Polarity Tester is capable of testing while mounted in transformers, oil circuit break-ers breakers or switchgear without moving bush-ings and CTs.

Adwel CTX-2000 1200V CT Test Set

Megger CTER-91 Current Transformer Excitation, Ratio and Polarity Tester

Adwel CTX-2000

Megger CTER-91

TRANSFORMER, MOTOR & GENERATORDIAGNOSTIC

The Megger MRCT is a portable unit used to per-form demagnetization, ratio, saturation, winding resistance, polarity, phase deviation, and insula-tion tests.

Megger MRCT Relay and Current Transformer Tester

Megger MRCT

The Megger MRCT Relay and Current Transform-er Test Set has additional features that allow the tester to be configured to test voltage transform-ers, measure ratio errors and phase angles as well as the secondary winding resistance of inductive voltage transformers.

Megger MRCT-VT Relay and Current Transformer Tester

Megger MRCT-VT

CT & PT Test Equipment



The Omicron CT Analyzer is the most complete testing system for protection and metering CTs according to IEEE and IEC standards.

The Omicron CT SB2 switch box is an accessory for the Omicron CT Analyzer that enables the au-tomatic testing of multi-ratio current transform-ers (CTs) with up to 6 tap connections (X1 to X6).

Omicron CT Analyzer

Omicron CT SB2 Switch Box for CT Analyzer

Omicron CT Analyzer

Omicron CT SB2

The Raytech CT-T1 is a microprocessor-based Cur-rent Transformer Tester that measures CT excita-tion current, ratio, and winding polarity tests, all without having to switch the leads during testing.

Raytech CT-T1 Current Transformer (CT) Tester

Raytech CT-T1

This unit must be used in combination with the Omicron CT Analyzer.

The EZCT is a microprocessor-based, cur-rent-transformer test set. This rugged and porta-ble test set can perform the current transformer (CT) excitation, CT current-ratio, and winding polarity tests.

Vanguard EZCT Automatic CT Test Set

Vanguard EZCT




Current transformers can be tested in their fi eld-mounted configuration, eliminating the need to remove bushings or current transformers from the host equipment.

Vanguard EZCT-10 Automatic CT Test Set

Vanguard EZCT-10

The EZCT-2000B Automated CT Test Set is Van-guard’s third-generation microprocessor-based current transformer test set.

Vanguard EZCT-2000B Automated CT Test Set

Vanguard EZCT-2000B

The EZCT-2000A can perform the current trans-former (CT) excitation test, measure the CT wind-ing resistance and CT current-ratio automatically.

Vanguard EZCT-2000A Automated CT Test Set

Vanguard EZCT-2000A

The EZCT-2000 is Vanguard’s second-generation microprocessor-based current transformer test set.

Vanguard EZCT-2000 Automated CT Test Set

Vanguard EZCT-2000




The EZCT-2000C Plus Automated CT Test Set is Vanguard’s third-generation microproces-sor-based current transformer test set.

Vanguard EZCT-2000C Plus Automated CT Test Set

Vanguard EZCT-2000C Plus




Combined with the Omicron CPC 100, the Omi-cron CP TD1 Capacitance/Dissipation Factor Test-ing Device (Tan Delta) measures the capacitance and dissipation factor (power factor) with labora-tory precision.

Electrical tests on transformers, current trans-formers, voltage transformers, grounding sys-tems, lines and cables, and circuit breakers can be performed with the Omicron CPC 100 Multi-func-tional Primary Test System.


Omicron CPC 100 Multi-functional Primary Test System

Omicron CP TD1

Omicron CPC 100







Megger IDAX300

Dielectric Frequency Response



IRIS Power Electromagnetic Core Imperfection Detection Test Set (EL CID or ELCID) Evolution can be used to test turbo-generators, hydro-gen-erators, and large motors.


EL CID Evolution

Electromagnetic Core Imperfection Detection Test Equipment (ElCID)



The HD Electric AT-100 Arrester and Leakage Test-er is a two stick, live line tester designed to test lightning arresters prior to energizing them on a power distribution system.

HD Electric AT-100 Arrester and Leakage Tester

HD Electric AT-100

Protec's Salisbury Custom Ground Cluster Cable can be used in substations to ground lines that are coming into breakers or transformers.

Salisbury Custom Ground Cluster Cable

Salisbury Custom Ground Cluster

Ground Cluster & Safety Test EquipmentElectromagnetic Core Imperfection Detection Test Equipment (ElCID)


Doble OTC Oil Test Cell offers everything you need to determine whether dirt, rust, acid or moisture has entered components to contaminate the oil inside.

The High Voltage DTS-60D Oil Dielectric Test Set provides repeatable and accurate measurement of the breakdown voltage of insulating fluids used in transformers, circuit breakers, bushings and capacitors.

The High Voltage DTS-60A Oil Dielectric AC Test Set provide repeatable, accurate measurement of breakdown voltage of insulating oils used in electrical equipment

Doble OTC Oil Test Cell

High Voltage DTS-60D Oil Dielectric Test Set

High Voltage DTS-60A Oil Dielectric AC Test Set

Doble OTC

High Voltage DTS-60D

High Voltage DTS-60A


The High Voltage DTS-100D Oil Dielectric Test Set is an Oil/Liquid Dielectric AC tester that provides repeatable and accurate measurement of the breakdown voltage of insulating fluids used in transformers, circuit breakers, bushings, capaci-tors, etc. It is rugged, reliable, and designed with field use in mind.

High Voltage DTS-100D Oil Dielectric AC Test Set

High Voltage DTS-100D

Oil Dielectric Test Equipment


The HV Diagnostics BA-75 is a portable Break-down Analyzer for on-site testing of transformer oil.

HV Diagnostics BA-75 Portable Breakdown Analyzer for Oil Testing

HV Diagnostics BA-75

The Megger OTS-60PB 60kV Oil Dielectric Test Set is a fully automatic, battery powered, portable oil test set.

Megger OTS-60PB 60kV Oil Dielec-tric Test Set

Megger OTS-60PB

The Megger OTS-60SX 60kV Oil Dielectric Test Set is a lightweight, semi-automatic, oil dielectric strength test set.

Megger OTS-60SX 60kV Oil Dielectric Test Set

Megger OTS-60SX


The Hipotronics OC60D Digital Liquid Dielectric Testing Equipment is designed to meet testing specifications in all parts of the world and test cells are available for ASTM D877, ASTM D1816 and IEC 156.

Hipotronics OC60D Digital Liquid Dielectric Testing Equipment

Hipotronics OC60D

Oil Dielectric Test Equipment



The Amprobe PRM-1 Phase Sequence Indicator identifies the phase sequence of the three phase electrical system.

Amprobe PRM-1 Phase Sequence Indicator

Amprobe PRM-1





PdMA MCE

PdMA MCE Max



Fluke 1587/MDT FC




The Tri State TSW-45 5kV Phase Sequence Indica-tor provides positive phase sequence indications, instant readings. .

Tri State TSW-45 5kV Phase Se-quence Indicator

Tri State TSW-45



The Doble M4000 M4100 Power Factor Insulation Analyzer and High Voltage Apparatus Tester is the industry standard for power apparatus and insulation testing. Its unique combination of test capabilities and artificial intelligence analysis soft-ware makes it the power industry’s most trusted Power Factor/Tan-Delta instrument.

The Doble M4140 Capacitor Bank Test Kit con-tains a clamp-on CT probe and cable that allows individual capacitors in a high voltage capacitor bank to be tested without the need to disconnect them from the bank.

When testing large specimens such as motors, generators or the occasional GSU with the Do-ble M4000 M4100 Insulation Analyzer, the Doble Type C 10kV Resonating Inductor provides the extra current needed to achieve high voltage test levels.

The Doble M4110 Leakage Reactance Module, also referred to as the short-circuit impedance test set, is a reliable tool to help indicate transformer winding deformation when used in conjunction with a Doble M4000 M4100 Insulation Analyzer.

Doble M4000 M4100 Power Factor Insulation Analyzer

Doble M4140 Capacitor Bank Test Kit

Doble Type C 10kV Resonating Inductor

Doble M4110 Leakage Reactance Module

Doble M4000 M4100

Doble M4140

Doble Type C

Doble M4110







The Model CB-100 28V Low-Voltage Capacitance and Insulation Power Factor Test Set is a self-con-tained instrument for the accurate measurement of electrical insulation characteristics.

Megger CB-100 28V Power Factor Test Set

Megger CB-100

Megger Delta-2000 Power Factor Test Set is a fully automatic test set has been designed to provide a comprehensive AC insulation diagnos-tic test for high voltage apparatus, such as trans-formers, bushings, circuit breakers, cables, light-ning arrestors and rotating machinery.

Megger Delta-2000 Power Factor Test Set

Megger Delta-2000

The Megger DELTA-3000 10 kV Automated Insu-lation Power Factor Test Set is a fully automatic 10 kV insulation power factor test set designed for condition assessment of electrical insulation in high voltage apparatus, such as transformers, bushings, circuit breakers, cables, lightning ar-resters and rotating machinery.

Megger DELTA-3000 10 kV Automat-ed Insulation Power Factor Test Set

Megger DELTA-3000

The Megger DELTA4000 Series 12 kV Insulation Diagnostic System is a fully automatic 12 kV insu-lation power factor/dissipation factor (tan∂) test set designed for condition assessment of electri-cal insulation in high voltage apparatus such as transformers, bushings, circuit breakers, cables, lightning arresters and rotating machinery.

Megger DELTA4000 Series 12 kV Insulation Diagnostic System

Megger DELTA4000







Omicron CP TD1This unit must be used in combination with the Omicron CPC 100.



Omicron CPC 100



Megger IDAX300

The Megger DELTA4310 12kV Insulation Diagnos-tic System is a fully automatic insulation power factor/dissipation factor (tan∂) test set designed for condition evaluation of electrical insulation in high voltage equipment

Megger DELTA4310 12kV Insulation Diagnostic System

Megger DELTA4310






DILO 3-027-R002



DILO 3-033-R050




DILO 3-033-R002



DILO SF6-LeakSpy






DILO 3-038-R032



DILO 3-037-R050





DILO 3-038R-R303

DILO D-155-R016





WIKA GA10




DILO HB 120A






ION LCP-1-P HS






WIKA GA20







Baker ST112A

Baker ST124R

Surge Test Equipment






Transformer testing at its best with the Doble M5200 Sweep Frequency Response Analyzer (SFRA). Short circuits, aging, system faults, or even transportation mishandling can cause prob-lems in a transformer.

The Megger Sweep Frequency Response Analyzer (FRAX 101) detects potential mechanical and elec-trical problems that other methods are unable to detect.

The Doble M5400 uses Sweep Frequency Re-sponse Analysis, a proven technique for making accurate and repeatable measurements.

Doble M5200 Sweep Frequency Response Analyzer

Megger Sweep Frequency Response Analyzer

Doble M5400 Sweep Frequency Response Analyzer

Doble M5200

Megger FRAX 101

Doble M5400

IRIS Power Electromagnetic Core Imperfection Detection Test Set (EL CID or ELCID) Evolution can be used to test turbo-generators, hydro-gen-erators, and large motors.


EL CID Evolution

Sweep Frequency Response (SFRA) Test Equipment


A High-Performance Ratiometer that accurately measures the primary-to-secondary transforma-tion ratio, while also indicating the polarity and excitation current.

AEMC DTR 8510 High-Performance Ratiometer

AEMC DTR 8510

The Doble TTR - Transformer Turns Ratio Capac-itor is an accessory to the Doble M4000 M4100 Power Analysis

Doble TTR - Transformer Turns Ratio Capacitor

Doble TTR

The Megger TTR310 Three-Phase Transformer Turns Ratio Test Set is designed to measure the turns ratio of power, instrument, and distribution transformers in a substation or manufacturing environment.

Megger TTR310 Three-Phase Transformer Turns Ratio Test Set

Megger TTR310


The AEMC DTR-8500 Digital Transformer Ratiom-eter measures power transformers, VT/PTs and current transformer CT turns ratios.

AEMC DTR-8500 Digital Transformer Ratiometer

AEMC DTR-8500

Transformer Turn Ratio Test Equipment



The Megger PFL20-1500 Power Cable Fault Loca-tor System emphasizes portability, featuring all of the basic fault locating tools within one compact package.

Megger PFL20-1500 Power Cable Fault Locator System

Meggger PFL20-1500

The Raytech T-Rex Three Phase Voltage Extension to Turns Ratio Meter was designed to give Engi-neers and Test Technicians the ability to test the phase relationships and actual voltage ratios of transformer windings while applying three phase voltage.

A rugged, lightweight instrument that automati-cally measures Turns Ratio, Voltage Ratio, Excita-tion Current, Phase Relationship, and Phase Dis-placement, the TR-Spy Mark II is a fully automatic instrument that can perform precision laboratory measurements, as well as function extremely well in the field for routine maintenance testing.

Raytech TR-1 Single Phase TTR (Transformer Turns Ratio) is a fully automatic, single phase trans-former turns ratiometer, that can be utilized for precision laboratory, manufacturing or field test measurements.

Raytech T-Rex Three Phase Voltage Extension to Turns Ratio Meter

Raytech TR-SPY Mark II Three Phase TTR (Transformer Turns Ratio)

Raytech TR-1 Single Phase TTR (Transformer Turns Ratio)

Raytech T-Rex

Raytech TR-SPY Mark II

Raytech TR-1



The ATRT-01 S3 is Vanguard’s fourth generation, micro-processor based, single phase, automatic transformer turns-ratio tester.

Vanguard ATRT-01 Single Phase TTR

Vanguard ATRT-01

The Vanguard ATRT-01B Battery Powered Single Phase TTR measures circuitry, and self-adjusts before each measurement to ensure turns-ratio accuracy.

Vanguard ATRT-01B Battery Powered Single Phase TTR

Vanguard ATRT-01B

The Vanguard ATRT-03 is lightweight, rugged, and portable, and is designed for transformer testing at utility power substations.

Vanguard ATRT-03 Automatic Three Phase TTR

Vanguard ATRT-03



The Raytech TR-SPY Mark III Three Phase TTR (Transformer Turns Ratio) is used in routine main-tenance and acceptance testing and for inves-tigating the core, windings, and tap changer settings of transformers for common problems.

Raytech TR-SPY Mark III Three Phase TTR (Transformer Turns Ratio)

Raytech TR-SPY Mark III



The Vanguard ATRT-03 S2 Automatic Three Phase Transformer Turns Ratio Tester outputs an ex-citation test voltage to the transformer primary windings.

Vanguard ATRT-03 S2 Automatic Three Phase TTR

Vanguard ATRT-03 S2

The Vanguard TRI-PHASE outputs a three phase excitation test voltage to the three transformer primary windings.

Vanguard TRI-PHASE True Three Phase TTR

Vanguard TRI-PHASE


The Vanguard TRF-100 Automatic Three Phase TTR is a microprocessor-based, automatic, three phase, transformer The TRF-100’s turns-ratio measurement accuracy is 0.1% or better. turns-ra-tio tester.

Vanguard TRF-100 Automatic Three Phase TTR

Vanguard TRF-100


The Adwel DWR Winding Resistance Test Set pro-vides valuable information about the condition of the transformer windings by measuring the DC resistance in the windings.

Adwel DWR Winding Resistance Test Set

Adwel DWR

The Adwel WRT-100 Winding Resistance Test Set has been designed for fast and extremely accu-rate resistance measurements of highly inductive transformers, generators and motors.

Adwel WRT-100 Winding Resistance Test Set

Adwel WRT-100

The Omicron CP SB1 is an accessory for the Omi-cron CPC 100 and simplifies measurement of three-phase power transformers.

Omicron CP SB1 Switch Box for Fully Automatic Testing of Three-Phase Power Transformers

Omicron CP SB1




Omicron CPC 100


Winding Resistance Test Equipment



The Raytech WR14 Winding Resistance Meter is a battery or line-operated, field-portable instru-ment designed specifically to measure the DC resistance of all types of magnetic windings safely and accurately.

Raytech WR50-13 Three Channel Winding Resist-ance Test Set is the enhanced version winding resistance system with a most advanced demag-netizing circuit.

The Raytech WR50-1A Power Source is an option designed to be used with the Raytech Micro-Jr. and Micro-Jr. 2 digital low resistance test set for testing highly inductive transformer windings.

Raytech’s WR50-12 Winding Resistance Meter of-fers a high output current, longer test leads, and is ideal for testing large transformers that need a higher test current.

Raytech WR14 15 Amp Winding Resistance Meter

Raytech WR50-13 Three Channel Winding Resistance Test Set

Raytech WR50-1A 50A Winding Resistance Test Set

Raytech WR50-12 Two Channel Winding Resistance Test Set

Raytech WR14

Raytech WR50-13

Raytech WR50-1A

Raytech WR50-12

This unit must be used in combination with the Raytech Micro Junior or Raytech Micro Junior 2



The Raytech WR50-2 Two Channel Winding Re-sistance Test Set was designed for a high degree of accuracy for the measurement of very low resistance of inductive loads.

Raytech WR50-2 Two Channel Winding Resistance Test Set

Raytech WR50-2

The Vanguard LTCA-40 Load Tap Changer Ana-lyzer accurately measures winding resistance of highly inductive power transformers.

Vanguard LTCA-40 Load Tap Changer Analyzer

Vanguard LTCA-40

The Vanguard TRM-403 Transformer Resistance Meter is a three phase transformer winding resist-ance meter that allow the user to connect all test cables to the transformer bushings.

Vanguard TRM-403 Transformer Resistance Meter

Vanguard TRM-403

The Vanguard WRM-10 Winding Resistance Test Set is designed to accurately measure the wind-ing resistance of highly inductive power trans-formers.

Vanguard WRM-10 Winding Resistance Test Set

Vanguard WRM-10




IndexAABB 504 Secondary Injection Test Set 236

ABB 505 Secondary Injection Test Set 236



ABB BTSB Secondary Injection Test Set 237

ABB CB-2000 Portable Capacitance Meter 92

ABB Ekip Connect Secondary Injection Test Set 206, 237

ABB PR010/T Secondary Injection Test Set 237

ABB TS3 Trip Unit Test Set 237

AC Hipot Test Equipment 42

ACL 300B Precision Electrostatic Locator 63

Adwel CTX-2000 1200V CT Test Set 262

Adwel DWR Winding Resistance Test Set 287

Adwel HVA40-10 High Voltage AC Hipot 42

Adwel TPS-1 Three Phase Power Source 165

Adwel WRT-100 Winding Resistance Test Set 287

AEMC 275HVD Non-Contact Voltage Detector 119

AEMC 1026 Digital Megohmmeter 85, 104, 148, 218

AEMC 2610 Ground Fault / Leakage Detector 78, 80

AEMC 3711 Clamp On Ground Resistance Test Set 78, 80

AEMC 3731 Clamp On Ground Resistance Test Set 78, 80

AEMC 5060 5000V Megohmmeter 85, 104, 148, 218

AEMC 5600 10A Digital Micro-Ohmmeter with Kelvin Probes 214

AEMC 6240 10A Micro-Ohmmeter 214



AEMC 6416 Clamp On Ground Resistance Tester 78, 80

AEMC CA811 Lightmeter 68

AEMC CA813 Lightmeter 68

AEMC DTR-8500 Digital Transformer Ratiometer 283

AEMC DTR 8510 High-Performance Ratiometer 283

AEMC L230 AC Voltage Simple Logger 128

AEMC MN103 10A Rigid Current Probe 119

AEMC MR521 1000AC, 1500 DC, Rigid AC/DC Current Probe 119

AEMC PEL 105 Power and Energy Logger 133

AEMC SL201 AC/DC Current Probe 119

Agilent N5750A DC Power Supply 165

Alber Cellcorder CRT-400 Cell Resistance Tester 36

Alber DMA-35-CRT Hydrometer with Data Logging 33

Allen-Bradley 140G-ELTT Trip Test Unit 238

Allen-Bradley 193-DNCT DeviceNet Configuration Terminal 128

Altek 211 RTD Calibrator 154

Altek 234 Signal Analyzer 154

Altek 334 Loop Calibrator 154

Altek 422 Universal Thermocouple Calibrator 154

Altek 941 Multi-Frequency Calibrator 155

Altek TechChek 820 Process Calibrator 155

Ametek 1726 Dual Function Digital Tachometer 72

Ametek CTC-650A Compact Dry Block Temperature Calibrator 188

Ametek Jofra CTC Compact Temperature Calibrator 188

Ametek T-620 3000 PSI Hydraulic Hand Pump 144

Ametek T-740 200 PSI Pneumatic Hand Pump 144

Amprobe A-1000 AC/DC Clamp On Transducer 120

Amprobe ACF-3000DM-A Flexible Current Transducer 120

Amprobe AT-2000 Advanced Wire Tracer 204

Amprobe AT-2005-A Industrial Multipurpose Tracer 204

Amprobe AT-2005 Wire Tracer 204

Amprobe AT-3000 Underground Cable Locator 45, 204

Amprobe AT-7020 Advanced Wire Tracer Kit 205

Amprobe AT-7030 Advanced Wire Tracer 205

Amprobe AT-7030 Underground Cable Locator 205

Amprobe DM-III Multitest Power Quality Recorder 85, 104, 133, 148, 218

Amprobe DM-II Pro Data Logger Recorder 133

Amprobe PRM-1 Phase Sequence Indicator 110, 272

Aquatronics EG 3000 Secondary Cable Fault Locator 45, 205

Aquatronics S.D.A.D. Acoustic Fault Detector 45

Arbiter 928A Power System Multimeter 94, 95

Ashcroft 1082A 0-30 PSI Test Gauge 168





Ashcroft 1082A 4.5-1500 PSI Test Gauge 169

Ashcroft 1082A 4.5-5000 PSI Test Gauge 169

Ashcroft 1082A 4-10K PSI Test Gauge 169

Astro-Med Dash 18 18-Channel Chart Recorder 118

Astro-Med TMX-18 High-Speed Data Acquisition System 118

BBacharach 125 Fyrite Pro Combustion Gas Analyzer 155

Baker (SKF) 12kV Static Motor Analyzer AWA-IV/12 52, 115, 281

Baker ST112A 12kV Surge Tester 48, 115, 133, 281

Baker ST124R 24kV Surge Tester 48, 115, 134, 281

Barometers 142

Battery Ground Fault Testers 32

Battery Hydrometers 33

Battery Impedance Test Sets 34

Battery Load Unit Test Sets 35

Battery Multimeters 36

Battery Test Equipment 31, 34

Beamex PGM 300 PSI Hand Pump 144

Bender LT3000 Line Isolation Monitor (LIM) and GFCI Tester 81

Bently Nevada TK3-2 Calibration Instrument 155

Bierer PD800W Cordless Phasing Tester 53, 132

Biosystems Multivision Gas Detector 156

B&K Precision 885 High Accuracy Handheld LCR/ESR Meter 92

BK Precision 1601 Regulated DC Power Supply 165

Borescopes 62

CCable Fault Locating Test Equipment 45, 204, 205

Capacitance & Inductance Test Equipment 92, 93, 266

Carriere STS100 Secondary Injection Test Set 238

Chart Recorders 118

Circuit Breaker Timing and Motion Analyzers 206, 207, 208, 209, 210, 211

Clamp On Ground Test Equipment 78

Controllers 194

Cooper Power Systems Type MET Electronic Recloser Control Tester 232

Cosa XPDM Portable Dew Point Meter 63, 212

Crystal XP2I 3,000 PSI Pressure Gauge 170

Crystal XP2I 5,000 PSI Pressure Gauge 170

Crystal XP2I 100 PSI Pressure Gauge 170

Crystal XP2I 500 PSI Pressure Gauge 170

Current Meters 94

Current Probes 37, 38, 119

DData Acquisition Test Equipment 128, 129

DC Hipots 48

Decade Box 143

Dent ELITEpro Data Logger 134

Dewpoint Analyzers 63

Dewpoint Analyzers 212

Dickson SP100 Temperature and Humidity Data Logger 188

Dielectric Frequency Response 267

DILO 3-027-R002 SF6 Percentage Analyzing Device 182, 254, 277

DILO 3-033-R002 SF6 Gas Leak Detector 182, 254, 277

DILO 3-033-R050 SF6 IR-Leak Detector 182, 254, 277

DILO 3-033-R200 SF6-LeakSpy 182, 254, 277

DILO 3-037-R050 Moisture Analyzer 183, 255, 278

DILO 3-038-R032 SF6 Multi-Analyzer 183, 255, 278

DILO 3-038R-R303 Zero Emission SF6 Analyzer 183, 255, 278

DILO D-155-R016 SF6 Service Hose 183, 255, 278

DILO SF6 Analyzer Adapter Kit 184, 256, 279

DILO SF6 Cylinder Heating Blanket HB 120A 184, 256, 279

Doble DUC 194

Doble F2253 Single Phase Relay Test Set 195

Doble F2500 Single Phase Relay Test Set 195

Doble F2700 High Quality Relay Test Set 195

Doble F6051 Time Synchronizer 197

Doble F6150e Relay Testing System 197

Doble F6150 Relay Testing System 197

Doble F6150SV Relay Testing System 197

Doble F6150sv Relay Testing System (F6860 IEC61850 GSE Interface Module) 198

Doble F6860 IEC61850 GSE Interface Module 198

Doble M4000 M4100 Power Factor Insulation Analyzer 112, 274

Doble M4110 Leakage Reactance Module 112, 274

Doble M4140 Capacitor Bank Test Kit 112, 274

Doble M5200 Sweep Frequency Response Analyzer 282

Doble M5400 Sweep Frequency Response Analyzer 282

Doble OTC Oil Test Cell 270

Doble TDR900 Circuit Breaker Test System 206



Doble TR3100 Circuit Breaker Timer / Analyzer 207

Doble TR3190 Linear and Rotary Transducer 207

Doble TTR - Transformer Turns Ratio Capacitor 283

Doble Type C 10kV Resonating Inductor 112, 274

Doble Universal Controller 194

Dranetz 300A - 3000A Flexible Current Probes 120

Dranetz 314 Phase Angle Meter 132

Dranetz HDPQ Xplorer Power Quality Analyzer 135

Dranetz PowerXplorer PX5 Power Monitor 135

Dranetz PPA-PP1R-115 Phase Power Adapter 135

Dranetz RR3035A-24 Flexible Current Probe 120

Dranetz RR3035A-36 Flexible Current Probe 121

Dranetz TR-2023 3000A Current Transformer 121

Dranetz TR-2510 10A Rigid Current Probe 121

Dran-View Hasp Key 134

Druck DPI 600 300 PSI Pressure Calibrator 156

Druck DPI 740 Precision Barometer 142

Druck UPS-II Loop Calibrator 156

Dwyer 1221 Slack Tube Manometer 156

EEA Technology CableData Collector 69

EA Technology UltraTEV Plus+ Partial Discharge Detector 69

Eaton Cutler Hammer 70C1056 Functional Test Kit 239

Eaton Cutler Hammer 70C1056G52 Circuit Breaker Test Set 240

Eaton Cutler Hammer 70C1056G54 Circuit Breaker Test Set 240

Eaton Cutler Hammer 140D481G02 Secondary Injection Test Set 239

Eaton Cutler Hammer 140D481G03 Secondary Injection Test Set 239

Eaton Cutler Hammer 1232C50G05 Secondary Injection Test Kit 238

Eaton Cutler Hammer 1232C50G10 Secondary Injection Test Kit 238

Eaton Cutler Hammer 1287C56G02 Secondary Injection Seltronic Test Kit 239

Eaton Cutler Hammer 7801C57 OPTIMizer Programmer / Trip Test 240

Eaton Cutler Hammer 8779C02G03 DS / DS II Adaptor 240

Eaton Cutler Hammer MTK1000 Magnum Trip Unit Test Kit 241

Eaton Cutler Hammer MTK2000 Magnum Trip Unit Test Kit 241

Eaton Cutler Hammer Power Supply for Digitrip Test Sets 165

Eaton Cutler Hammer Power Supply Module 241

Eaton Cutler Hammer SPBPTK Secondary Injection Test Set 242

ElCID 268

EL CID Evolution 268, 282

Electromagnetic Core Imperfection Detection Test Equipment 268

Electrostatic Locators 63

Empro Shunts B-1000-50 1000A 50Mv Shunt 194

Enoserv RTS Relay Dongle Key 196

ETI AD-1 Portable AC DC Power Supply 166

ETI AD-2 AC DC Variable Power Supply 166

ETI Circuit Breaker Test Stabs System 226

ETI PI-800 Portable Circuit Breaker Test Set 226

ETI PI-1600B High Current Test Set 226

ETI PI-4000 High Current Test Set 226

ETI PI-5000 High Current Test Set 227

ETI PI-6000 Primary Circuit Breaker Test Set 227

Everest VIT XL875 Pro Borescope 62

Everest VIT XLF8575B Borescope 62

Extech 42540 Infrared Thermometer 66

Extech 407117 Heavy Duty Mini Metal Vane Anemometer 157

Extech 407736 Sound Level Meter 157

Extech 407764 Sound Level Meter 157

FFault Wizard Portable Fault Location System 45

FEDERAL PIONEER DDT-USRC Field Test Unit 242

FLIR C2 Compact Thermal Imaging System 64

FLIR T440 Thermal Imaging Camera 64

FLIR T640 Thermal Imaging Camera 64

Fluke 33 1000A AC/DC Clamp On Ammeter 95

Fluke 43B Single Phase Power Quality Analyzer 135

Fluke 63 Mini IR Thermometer 66

Fluke 66 Infrared Thermometer 66

Fluke 80K-6 High Voltage Probe 122

Fluke 80T-IR Infrared Temperature Probe 122

Fluke 87-III True RMS Multimeter 95

Fluke 87 Industrial Multimeter 95

Fluke 87-V True RMS Multimeter 96

Fluke 123 ScopeMeter 130

Fluke 190-204/S ScopeMeter Test Tool 130



Fluke 275 Smart Communicator 186

Fluke 287 True-RMS Electronics Logging Multimeter 96

Fluke 322 Clamp Meter 96

Fluke 336 Clamp Meter 94, 95

Fluke 337 Clamp Meter 94

Fluke 375 FB Smart Communicator Field Bus Enabled 186

Fluke 434 Energy Analyzer 136

Fluke 435 Power Quality Energy Analyzer 136

Fluke 700P00 1 H20 Pressure Module 171

Fluke 700P01 10 H20 Pressure Module 171

Fluke 700P02 1 PSI Pressure Module 171






Fluke 700P08 1,000 PSI Pressure Module 173







Fluke 700PA5 30 PSI Pressure Module 174

Fluke 700PA6 100 PSI Pressure Module 175

Fluke 700PD2 1 PSI Pressure Module 175






Fluke 700PV4 15 PSI Pressure Module 176

Fluke 707 Loop Calibrator 157

Fluke 718-100G Pressure Calibrator 158

Fluke 725 Multifunction Process Calibrator 158

Fluke 743B Documenting Process Calibrator 158

Fluke 744 Documenting Process Calibrator 159


Fluke 754 Documenting Process Calibrator 159

Fluke 787 ProcessMeter 96, 160

Fluke 789 ProcessMeter 97, 160

Fluke 810 Vibration Tester 75

Fluke 922 Airflow Meter / Micromanometer 161

Fluke 1587 Insulation Multimeter 97

Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit 85, 104, 110, 148, 218, 272

Fluke 1625-2 GEO Earth Ground Tester 81

Fluke 1625 GEO Earth Ground Tester 81

Fluke 1735 Three-Phase Power Quality Logger 136

Fluke 1750 Three Phase Power Recorder 136

Fluke 2645 NetDAQ Data Acquisition Unit 128

Fluke 2686A Data Acquisition System 129

Fluke 2686 Data Acquisition System 128

Fluke 3005 5A Current Probe 121

Fluke 3014 40A Current Probe 122

Fluke 3014 40A Current Transformer (CT) 124

Fluke 3310 5000A Flex Current Probe 122

Fluke 9140 Dry Well Calibrator 188

Fluke FOM Fiber Optic Meter 46

Fluke FOS-1300 Fiber Optic Light Source 68

Fluke HV231-10 28kV AC High Voltage Probe 123

Fluke i410 AC/DC Current Clamp 123

Fluke i1010 AC/DC Current Clamp 123

Fluke i2000 Flex AC Current Clamp 123

Fluke T5-1000 Voltage, Continuity and Current Tester 137

Fluke Ti55 IR FlexCam Thermal Imager 65

Fuji FLD22 Transducer 207

Fuji PortaFlow X Ultrasonic Flow Meter 74

GGE EntelliGuard GTUTK20 Digital Test Kit 242

GE M-PRO Test Box 242

General Electric DEH-233 Entellisys System Test Kit 243

General Electric IB-9 Watthour Meter 99

General Electric IB-10 Watthour Meter 99

General Electric PST1-1 Secondary Injection Test Set 243

General Electric TAKTS2 Secondary Injection Test Set 243

General Electric TTS-1 VersaTrip Circuit Breaker Test Set 244

General Electric TVRMS2 Secondary Injection Test Set 244

General Electric TVTS1 Secondary Injection Test Set 244

General Resistance DA-RTD-200 Decade Box 143

GE SI Pressure HTP1 10000 PSI Hydraulic Hand Pump 144

GE SI Pressure TP1-40 - 600 PSI Pneumatic Hand Pump 145

Ground Cluster & Safety Test Equipment 269

Ground Resistance Test Equipment 80, 81, 82, 83, 84

HHand Pumps 144

Hart Scientific (Fluke) 275 Smart Communicator 186

Hart Scientific (Fluke) 375 FB Smart Communicator Field Bus Enabled 186

Hart Scientific (Fluke) 9100S-A Dry-Well Calibrator 189

Hart Scientific (Fluke) 9102S Dry-Well Calibrator 189

Hart Scientific (Fluke) 9140-A Dry-Well Calibrator 189

Hart Scientific (Fluke) 9141-A Dry-Well Calibrator 189

Hastings 6799 Hot Stick Tester 124

HD Electric AT-100 Arrester and Leakage Tester 269

HD Electric Double Vision Dual Display Wireless Voltage Indicating Phaser - DDVIP-40 53, 132

HD Electric HVA-2000 High Voltage Digital Ammeter 94

HD Electric Mark II 45kV Phasing Kit 53

HD Electric MARK III 75kV Dual Range Voltmeters and Phasing Set 53

High Potential, Cable & Bus Test Equipment 42

High Voltage ADL-1 Data Logger 57

High Voltage ALT-120/60 120kV / 60kV AC Hipot 42

High Voltage CDS-2010B 20kV Thumper 46

High Voltage DTS-60A Oil Dielectric Dielectric AC Test Set 270

High Voltage DTS-60D Oil Dielectric Test Set 270

High Voltage DTS-100D Oil Dielectric AC Test Set 270

High Voltage PFT-103CM 10kV 3kVA AC Hipot 42

High Voltage PFT-301CM 30kV 1.5kVA AC Hipot 43

High Voltage PFT-303 30kV 3kVA AC Hipot 43




High Voltage PTS-75 75kV DC Hipot with Megohmmeter 49

High Voltage PTS-80 80kV DC Hipot 49

High Voltage PTS-130 130kV DC Hipot 48

High Voltage PTS-200 200kV DC Hipot with Megohmmeter 48

High Voltage TD-34E 34kV Tan Delta Bridge 54

High Voltage TDB-60 60kV Tan Delta Bridge 54

High Voltage TDR1669 Time Domain Reflectometer 55

High Voltage VLF-34E 34kV VLF Hipot 49, 57

High Voltage VLF-65E 65kV VLF Tester 49

High Voltage VLF-4022CM 40kV AC VLF Hipot 57

High Voltage VLF-6022 60kV VLF Hipot 57

Hioki 3196 Power Quality Analyzer 137

Hioki PW3198 Power Quality Analyzer 137

Hipotronics 100HVT 100kV 5kVA AC Hipot 44

Hipotronics 750-2 50kV AC Hipot 44

Hipotronics 880PL 80kV DC Hipot 50

Hipotronics KV100A 100kV AC / DC Kilovolt Meter 97

Hipotronics OC60D Digital Liquid Dielectric Testing Equipment 271

Hipotronics TDR1130A Time Domain Reflectometer 55

Honeywell GasAlertMicro Gas Detector 162

Honeywell STS103 Communicator 186

Hukseflux I-V400 Peak Performance Analyzer 139

HV Diagnostics BA-75 Portable Breakdown Analyzer for Oil Testing 271

HV Diagnostics HVA28TD 28kV VLF / DC High Voltage Test Instrument 50, 58

HV Diagnostics HVA30 30kV VLF / DC High Voltage Test Instrument 50, 58




HV Diagnostics TD30 30kV Tan Delta Bridge 54

HV Diagnostics TD60 60kV Tan Delta Bridge 54

HV Diagnostics TD90-MC 90kV 51, 59

IInfrared Cameras 64

Infrared Thermometers 66, 67

Inspection Test Equipment 61

Insulation & Ground Test Equipment 78

Insulation Resistance (Megohmmeters) Test Equipment 85, 86, 87, 88, 89

ION LCP-1-P HS SF6 Gas Detector 184, 256, 279

IRIS Power Electromagnetic Core Imperfection Detection Test Set 114, 267, 268, 276, 282

ISA T-1000 Single Phase Relay Test Set 195

KKNF N726 Motorized Vacuum Pump 145

LLarkin Power Components Power Semiconductor Tester - Model M3K 131

Leader LFG-1300S Function Generator 162

Light Meters 68

Low Resistance Ohmmeters 214, 215, 216, 217

MMadTest Instruments DSM4i1 Adapter 244

Manta MTS-5000 Protective Relay Test System 198

Manta MTS-5100 Protective Relay Test System 198

Martel MC-1000 Multifunction Process Calibrator 162

Martel PI-10K 10,000 PSI Pressure Gauge 177

Megger 210415 15kV Analog Megohmmeter 85, 86, 104, 105, 110, 148, 149, 218, 219, 272

Megger 230425 0-4 kV AC and 0-5 kV DC High-Pot Tester 44, 51

Megger 247001 10A Digital Low Resistance Ohmmeter 215

Megger 250202 DET2/2 Digital Ground Resistance Tester 81

Megger Battery Ground Fault Locator 32, 82

Megger Battery Ground Fault Tracer 32, 82

Megger Battery Voltage Monitor 35

Megger BGL 32, 82

Megger BITE 2P Battery Impedance Test Set 34

Megger BITE 3 Battery Impedance Test Set 34

Megger BM15 Analog 5kV Insulation Resistance Tester 86, 105, 149, 219

Megger CB-100 28V Power Factor Test Set 113, 275

Megger CB-360-DC/CB-120-DC DC Circuit Breaker Test Sets 227

Megger CB-832 High Current Test Set 227

Megger CB-845 High Current Test Set 228

Megger CFL510F Hand-held Time Domain Reflectometer 55

Megger CFL535G Advanced Dual Channel TDR 55

Megger CTER-91 Current Transformer Excitation, Ratio and Polarity Tester 262

Megger DDA-1600 Circuit Breaker Tester 228

Megger DDA-6000 Universal Circuit Breaker Test Set 228

Megger Delta-2000 Power Factor Test Set 113, 275

Megger DELTA-3000 10 kV Automated Insulation Power Factor Test Set 113, 275

Megger DELTA4000 Series 12 kV Insulation Diagnostic System 113, 114, 275, 276

Megger DELTA4310 12kV Insulation Diagnostic System 114, 276

Megger DET3TC Digital Ground Tester 82

Megger DET3TD Digital Ground Tester 83

Megger DET4TCR2 Ground Resistance Test Kit 83

Megger DET4TD Earth Tester 83

Megger DET24C Ground Resistance Tester 79, 82

Megger DET62D Ground Resistance Test Ki 83

Megger DLRO10 10A Digital Low Resistance Ohmmeter 216

Megger DLRO10HD 10A Digital Low Resistance Ohmmeter 215

Megger DLRO200-115 200A Digital Low Resistance Ohmmeter 216

Megger DLRO600 600A Digital Microhmmeter 215

Megger FRAX 101 282

Megger IDAX300 Insulation Diagnostic Analyzer 114, 267, 276

Megger MIT40X Industrial Insulation Tester 86, 105, 149, 219

Megger MIT410 Industrial Insulation Tester 86, 105, 149, 219

Megger MIT430-TC2 Insulation Resistance and Continuity Tester 87, 106, 138, 150, 220

Megger MIT485 Industrial Insulation Tester 87, 106, 150, 220

Megger MIT520/2 5kV Insulation 87, 106, 150, 220

Megger MIT520/2 5kV Insulation Resistance Tester 87, 106, 150, 220

Megger MIT525 5kV Insulation Resistance Tester 87, 106, 150, 220



Megger MOM2 215

Megger MOM2 200A Microhmmeter 215

Megger MPRT8430 Three Phase Protective Relay Test System 198

Megger MPRT8445 Three Phase Protective Relay Test System 199

Megger MRCT Relay and Current Transformer Tester 262

Megger MRCT-VT Relay and Current Transformer Tester 262

Megger MS-2A Circuit Breaker and Overcurrent Relay Tester 229

Megger MS-2 Circuit Breaker and Overload Relay Test Set 228

Megger MTDR1 Single-Phase Time Domain Reflectometer 56

Megger ODEN AT Primary Current Injection Test System 229

Megger OTS-60PB 60kV Oil Dielectric Test Set 271

Megger OTS-60SX 60kV Oil Dielectric Test Set 271

Megger PFL20-1500 Power Cable Fault Locator System 284

Megger PFL22M1500 Power Cable Fault Locator System 46

Megger PFL40A Power Cable Fault Locator System 46, 47

Megger PMM-1 Power Multimeter 97

Megger Power DB Hardware Key 137

Megger Professional Earth Test Kit 84

Megger PULSAR Universal Protective Relay Test System 199

Megger S1-554 5kV Insulation Resistance Tester 88, 107, 151, 221

Megger SG32-1500M Power Cable Fault Locator 47

Megger SMRT1 Single-Phase Relay Test System 196

Megger SMRT36 Three-Phase Protective Relay Test System 199

Megger SMRT410 Multi-phase Relay Tester 199

Megger SR-98 Single Phase Relay Test Set 196

Megger Sweep Frequency Response Analyzer 282

Megger TORKEL 860 Battery Load Unit 35

Megger TORKEL 950 Battery Load Unit 35

Megger TTR310 Three-Phase Transformer Turns Ratio Test Set 283

Megohmmeters 85, 86, 87, 88, 89, 104, 148, 149, 218, 219

Meriam D1000IW Precision Manometer 162

Meriam DP200I Portable Digital Manometer / Calibrator 163

Merlin Gerin 685836A Secondary Injection Test Set 245

Merlin Gerin ME Test Kit Secondary Injection Test Set 245

Meters & Meter Test Equipment 91

Metrel 2077 5kV Insulation Resistance Tester 88, 107, 151, 221

Metrel 2088 Ground Tester 84

Metrel 3103 1kV Insulation Resistance Tester 89, 108, 152, 222

Metrel 3200 TeraOhm 10kV Insulation Resistance Tester 89, 108, 152, 222

Mikron 7200v Infrared Camera with Visual Light Camera 65

Monarch Nova Strobe Digital Strobe Tachometer 72

Monarch Pocket Laser Tach 200 72

Motor Analyzers 109

Motorola XU2100 UHF Radio 73

Motor & Rotating Apparatus Test Equipment 103

Multi-Amp (Megger) MS-2 Circuit Breaker Test Set 229

Multi-Amp MS-1 Overload Relay and Circuit Breaker Test Set 229

Multifunction & Process Calibrators 154

Multimeters 95

OOfil Systems DayCor Superb-OD Corona Camera 65

Ohmic BET-300AD Equipotential Test Set 84

Oil Dielectric Test Equipment 270, 271

Olympus IPLEX RT Videoscope 62

Omicron CAL 542 Charge Calibrator 69

Omicron CIBANO 500 Circuit Breaker Test System 207, 216

Omicron CMC 356 Universal Relay Test Set and Commissioning Tool 200

Omicron CPC 100 Multi-Functional Primary Test System 92, 114, 230, 266, 276, 287

Omicron CP CU1 Multifunctional Coupling Unit for the CPC 100 84

Omicron CP SB1 Switch Box for Fully Automatic Testing of Three-Phase Power Transformers 287

Omicron CP TD1 Capacitance/Dissipation Factor Testing Device (tan Delta) 92, 114, 276

Omicron CP TD1 Capacitance/Dissipation Factor Testing Device (Tan Delta) 266

Omicron CT SB2 Switch Box for CT Analyzer 263

Omicron MCT 120 High-Frequency Current Transformer 70

Omicron OMS 605 Portable Partial Discharge (PD) Monitoring System 70

Omicron PD Terminal Box 70

Omicron RCP1 19-Pin Recloser Control Cable Package 232

Omicron RST1 14-Pin Recloser Control Cable Package 232

Omicron RVT1 32-Pin Recloser Control Cable Package 232

Omicron UCS1 UHF Cable Sensor 70

Omicron UHF 620 Bandwidth Converter 71

Omicron UPG 620 Pulse Generator 71

Oscilloscopes 130

PPartial Discharge Test Equipment 69, 70, 71

PdMA MCE 5kV Electric Motor Analyzer 109, 110, 272

PdMA MCE Max 5kV Motor Circuit Evaluation Analyzer 109, 110, 272

Phase Angle Meters 132

Phase Sequence & Motor Rotation Test Equipment 110, 111, 272, 273

Phasing Kits 53

Phenix HC-1 High Current Test Set 230

PIE 531 Loop Calibrator 163

PMDT PDetector Handheld Partial Discharge Detector 69

Portable Tan Delta Measurement 51, 59

Power Analysis & Data Acquisition Test Equipment 117

PowerComm PCA-4125 Power Communications Analyzer 93, 98, 131

Power Factor Test Equipment 112, 113, 114, 274, 275, 276

Power Quality Test & Power Recorder Equipment 133

PowerSight PS3550 Power & Energy Analyzer 138

Power Supplies 165

Pressure Modules & Gauges 168

Primary Current Injection Test Equipment 224, 225, 226, 227, 228, 229, 230, 231

Primary Current Injection Test Equipment Selection Guide 224, 225

Prime Technology RTD-100 Simulator 143

Process Instrumentation & Controls Test Equipment 141

QQualitrol KIT-013-1 Field Test Kit 163

RRadian Research RB-10 Bantam Lite Portable Test Kit 99

Radian Research RM-DS/s Meter Disk Sensor 99

Ralston APGO 300 PSI Pneumatic Hand Pump 145

Ralston DPPV Low Pressure and Vacuum Hand Pump 145

Ralston XHGV 5000 PSI Hydraulic Hand Pump 146

Raytech CT-T1 Current Transformer (CT) Tester 263

Raytech Micro Centurion II 200A Precision Micro Ohm Meter 84, 216

Raytech Micro Junior 2 10A Precision Micro Ohm Meter 217

Raytech Micro Junior 10A Precision Micro Ohm Meter 217

Raytech TR-1 Single Phase TTR (Transformer Turns Ratio) 284

Raytech T-Rex Three Phase Voltage Extension to Turns Ratio Meter 284

Raytech TR-SPY Mark III Three Phase TTR (Transformer Turns Ratio) 285

Raytech TR-SPY Mark II Three Phase TTR (Transformer Turns Ratio) 284

Raytech WR14 15 Amp Winding Resistance Meter 288

Raytech WR50-1A 50A Winding Resistance Test Set 288

Raytech WR50-2 Two Channel Winding Resistance Test Set 289

Raytech WR50-12 Two Channel Winding Resistance Test Set 288

Raytech WR50-13 Three Channel Winding Resistance Test Set 288

Recloser Control Test Equipment 232, 233

Relay & Protective Test Equipment 193

Relcom FBT-6 Foundation Fieldbus Monitor 187

Reliable Power Meter (Fluke) 3014 40A Current Transformer (CT) 124

Resistance Tester 87, 106, 150, 220

Rion VM-82 Vibration Meter 75

RKI GX-2001 Portable Gas Meter (LEL, 02, CO, H2S) 163

Rosemount 1151 1 H20 Pressure Transmitter 177

RxMS 3,000A Rope 124

RxMS 10,000A Gen2 Rope 124

RxMS 2000A 2” ID Probe 37, 125

RxMS 4000A 4.5x2.5 ID Probe 37, 125

RxMS AC Current Probe 10A Clamp-On 0.75” Diameter 125

RxMS AC Current Probe 200A Clamp-On 0.75” Diameter 125

RxMS Cx Monitor 39, 138

RxMS Wireless Battery Dc Probe 37, 126

RxMS Wireless Communications Device 38, 126

RxMS Wireless DCx 10 Channel Probe 37

RxMS Wireless Temperature and Humidity Probe 38, 126

SSalisbury Custom Ground Cluster Cable 269

Satin American ETC-PTS Secondary Injection Test Set 245

SBS-2002 Battery Hydrometer 33

SBS-2003 Digital Hydrometer / Density Meter 33

SBS-3500 Hydrometer 33

SBS IBEX-1000P Battery Impedance Test Set 34

Scientific Columbia SC10 (220-1) Watthour Standard 99, 100

Secondary Current Injection Test Equipment 236

Sencore LC53 Capacitance and Inductance Meter 93

SF6 Gas Test Equipment 182, 183, 254, 277, 278

SFRA 282

Shunts 194

Siemens Breaker Data Adapter Plus (BDA Plus) 208, 245

Siemens ELTPHB VL Portable Test Kit 246

Siemens PTS-3 Secondary Injection Test Set 246

Siemens PTS-4 Secondary Injection Test Set 246

Siemens PTS-5 Secondary Injection Test Set 246, 247

Siemens SBAPM Auxiliary Power Module for SB Breakers 247

Siemens TS-31 Secondary Injection Test Set 247

Siemens Westrip Amptector Adapter Plug 247

Siemens WLTS Secondary Injection Test Set 247

Single Phase Relay Test Equipment 195, 196

SKF (Baker) 12kV Static Motor Analyzer AWA-IV/12 52, 115, 281

Smart Communicators 186, 187

SMC Mentor 12 Three Phase Relay Test Set 200

SMC PME-20-PH Phase Angle Meter 132

Solar Monitoring Equipment 139

SPM Vibrameter VIB-11 Vibration Meter 75

Square D by Schneider 55391 ME Test Kit 248

Square D by Schneider CBTM1 Module for UTS3 Universal Test Set 248

Square D by Schneider CBTM3 Module for UTS3 Universal Test Set 248

Square D by Schneider CBTM4A Module for UTS3 Universal Test Set 249

Square D by Schneider CBTMB Adapter for UTS3 Universal Test Set 248

Square D by Schneider S33594 Secondary Injection Test Set 252

Square D by Schneider S33595 Secondary Injection Test Set 253

Square D by Schneider UTA Test Set 250

Square D by Schneider UTS3 Secondary Injection Test Set 249

Staco 1520-3 480V, 3 Phase, 9A Variable Transformer 167

Summit Technology 5KVP High Voltage Probe Set 127

Summit Technology 15KVP 15k Voltage Probe Set with Hot Sticks 127

Surge Test Equipment 115, 281

Sweep Frequency Response (SFRA) Test Equipment 282

Switchgear, Circuit Breaker, & Recloser Test Equipment 203

TTachometers 72

Tan Delta 92, 114, 276

Tan Delta Bridge Test Equipment 54

TDR 55, 56

Temperature Test Equipment 188, 189, 190

TESCOM (Emerson) 44-100 10,000 PSI Pressure Regulator 164, 177

Tester, Megger MIT40X Industrial Insulation 86, 105, 149, 219

Tester, Megger MIT410 Industrial Insulation 86, 105, 149, 219

Tester, Megger MIT485 Industrial Insulation 87, 106, 150, 220

Testing Automation Software 196

Three Phase Relay Test Equipment 197, 198, 199, 200

TIF 300HV Tic Tracer 47

Time Domain Reflectometers 55, 56

Transcat 4363T RTD Calibrator 164

Transcat 6215P 150 PSI Pressure Pump 146

Transcat 7010T RTD Simulator 143

Transcat 21052E Portable Loop Power Supply 167

Transcat 23232E 3A, 34V DC Power Supply 167

Transcat 23300P-15 15 PSI Digital Pressure Gauge 178







Transcat 23300P-1000 1,000 PSI Test Gauge 179

Transcat 23622P 600 PSI Transmation Pneumatic Hand Pump 146

Transformer, Motor & Generator Diagnostic 262

Transformer Turn Ratio Test Equipment 283

Transmation 92 36 PSI Digital Pressure Calibrator 164

Transmation 2000PV Universal Hand Pump 146

Transmation 4238P Pneumatic Vacuum Pump 147

Transmation PD1121 5 PSID Pressure Module 180

Tri State TSW-22 10:1, 5kV High Voltage Divider 98

Tri State TSW-45 5kV Phase Sequence Indicator 111, 273

UUEI CLM100 Cable Length Meter 47

UEI Static Pressure Test Kit 180

UE Systems Ultraprobe 15,000 Touch 74

UE Systems UltraProbe 100 Ultrasonic Leak Detector 74

UE Systems UWC-15 Ultrasonic Wave Form Concentrator (Parabolic Dish) 74

UHF Radios 73

Ultrasonic Detectors 74

Universal Services GLI-01 Proximity Sensor Calibrator 164

USG 3-30 3”, 30 PSIG Test Gauge 180





Utility Relay Co. B-290 Secondary Injection Test Set 250

Utility Relay Co. B-291-MP Secondary Injection Test Set 250

Utility Relay Co. B-291-S Secondary Injection Test Set 250

Utility Relay Co. B-292 Secondary Injection Test Set 251

VVacuum Bottle Test Equipment 258

Vacuum Interrupters MAC-TS4 Magnetron Atmospheric Condition (MAC) Analysis Test Set 258

Vacuum Interrupters PowerVAC V1 Rigid Magnetic Coil 258

Vaisala DM70 Dewpoint Analyzer 63, 212

Vaisala HM34 Temperature / Relative Humidity Meter 190

Vanguard ATRT-01B Battery Powered Single Phase TTR 285

Vanguard ATRT-01 Single Phase TTR 285

Vanguard ATRT-03 Automatic Three Phase TTR 285

Vanguard ATRT-03 S2 Automatic Three Phase TTR 286

Vanguard Auto-Ohm 100 Ampere Micro-Ohmmeter 217

Vanguard Auto-Ohm-200 S3 Ampere Micro-Ohmmeter 217

Vanguard CT-6500-6 6 Channel Circuit Breaker Timer / Analyzer 208

Vanguard CT-6500 Circuit Breaker Timer / Analyzer 208

Vanguard CT-7000 Digital Circuit Breaker Analyzer 208

Vanguard CT-7500 Circuit Breaker Timer / Analyzer 209

Vanguard DIGITMR Circuit Breaker Timer / Analyzer 209

Vanguard Doble Transducer Adapter 9084-UC 209

Vanguard EZCT-10 Automatic CT Test Set 263, 264

Vanguard EZCT-2000A Automated CT Test Set 264

Vanguard EZCT-2000 Automated CT Test Set 264

Vanguard EZCT-2000B Automated CT Test Set 264

Vanguard EZCT-2000C Plus Automated CT Test Set 265

Vanguard EZCT Automatic CT Test Set 263

Vanguard LTCA-40 Load Tap Changer Analyzer 289

Vanguard MCCB-250 Circuit Breaker Tester 231

Vanguard RT-1 Rotary Transducer with Magnetic Mount 210

Vanguard RT-2 Rotary Transducer 209

Vanguard TR-1 25" Linear Transducer 210

Vanguard TR-2 10" Linear Transducer 210

Vanguard TRF-100 Automatic Three Phase TTR 286

Vanguard TR-HMA ABB AHMA-8 Transducer 210

Vanguard TR-HMB ABB HMB Transducer 211

Vanguard TRI-PHASE True Three Phase TTR 286

Vanguard TRM-403 Transformer Resistance Meter 289

Vanguard UPS-S2 300V DC, 240V AC 10A Power Supply 167

Vanguard VBT-60 Vacuum Bottle Tester 258

Vanguard VBT-80 Vacuum Bottle Tester 258

Vanguard WRM-10 Winding Resistance Test Set 289

Vibration Meters 75

VLF Hipots 57, 58, 59

WWatthour Meters 99, 100

Wavetek TMA10 Anemometer Thermometer 67

Westinghouse 1255C48G02 Secondary Injection Test Set 251

Westinghouse SPBPTK Secondary Injection Test Set 251

WIKA GA10 SF6 Breaker Analyzer 184, 256, 279

WIKA GA20 SF6 Moisture-Humidito Analyzer 185, 257, 280

Winding Resistance Test Equipment 287, 288, 289

ZZensol Recloser Control Analyzer - GEN-6 233

5-2018


PROTEC EQUIPMENT RESOURCES1517 West Carrier Parkway, Suite 116Grand Prairie, TX 75050

Phone: 844-PROTEC-0 (844-776-8320)

www.protecequip.com

electrical test & measurement equipment · electrical test & measurement equipment 844 ......

Documents