electrical-power-engineer-cv

2
PERSONAL INFORMATION Name: Yousif Alonazi Date / Place of birth: September 27, 1992 / Riyadh Nationality: Saudi Marital status: Single Mobile: 0504443399 E-mail: [email protected] OBJECTIVE To work in a challenging environment demanding all my skills and efforts to explore and adapt myself in different fields and realize my potential where I get the opportunity for continuous learning. EDUCATION Bachelor of Science in Electrical Power Engineering, January 2016 King Saud University, Riyadh Excellent with second class honor GPA: 4.53/5 Courses included: Electrical Power Laboratory Fundamentals of Power Systems Power System Protection Power System Operation & Control Power System Planning Power System Analysis Electromechanical Energy Conversion Renewable Energy Engineering Optoelectronic Devices and Systems Solar Cells and Photovoltaic Systems TRAINING Saudi Aramco Company, June 8, 2015 to July 30, 2015 Power operation department (POD), Safaniya - Power system Protection, CTs and PTs tests, relays (electromechanical relay, microprocessor relay, overcurrent relay, overvoltage relay, under voltage relay, differential relay). - Perform different relay tests (trip tests, troubleshooting, and stabilities). - Transformer components and their functions (insulators, radiators, primary& secondary, bushingetc). - Power factor tester, transformer turns ratio (TTR) tester, and oil dielectric Tester. - Conductor types for the overhead lines (ACSR, AAAC), surge arresters function, insulators (post and suspension), and underground cable fault distance detector. - Get familiar with substation single line diagram. - Design and planning of small distribution feeders. Saudi Electricity Company, June 8, 2014 to August 14, 2014 Power plant (PP10), Riyadh - Training program for safety consideration inside the power plant. - Gas turbine component, combined cycle gas turbine, synchronous generator, permanent magnet generator (PMG), starting motor, excitation control, fuel control system. - Step up transformers 13.8/380 KV high rated MVA, transformers cooling systems (ONAN, ONAF), step down transformers, tap changer, voltage transformer (VT), current transformer (CT). - Black start generators, protection system of generators and transformers, plant grounding system. - Turbines operation, generator synchronization procedures, main control panel system. - Get familiar with power plant single line diagram.

Upload: yousif-alanazi

Post on 15-Apr-2017

203 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Electrical-power-engineer-CV

PERSONAL INFORMATION

Name: Yousif Alonazi

Date / Place of birth: September 27, 1992 / Riyadh

Nationality: Saudi

Marital status: Single

Mobile: 0504443399

E-mail: [email protected]

OBJECTIVE

To work in a challenging environment demanding all my skills and efforts to explore and adapt myself in

different fields and realize my potential where I get the opportunity for continuous learning.

EDUCATION

Bachelor of Science in Electrical Power Engineering, January 2016

King Saud University, Riyadh

Excellent with second class honor

GPA: 4.53/5

Courses included:

Electrical Power Laboratory Fundamentals of Power Systems

Power System Protection Power System Operation & Control

Power System Planning Power System Analysis

Electromechanical Energy Conversion Renewable Energy Engineering

Optoelectronic Devices and Systems Solar Cells and Photovoltaic Systems

TRAINING

Saudi Aramco Company, June 8, 2015 to July 30, 2015

Power operation department (POD), Safaniya

- Power system Protection, CTs and PTs tests, relays (electromechanical relay, microprocessor relay, overcurrent relay, overvoltage relay, under voltage relay, differential relay).

- Perform different relay tests (trip tests, troubleshooting, and stabilities). - Transformer components and their functions (insulators, radiators, primary& secondary, bushing…etc). - Power factor tester, transformer turns ratio (TTR) tester, and oil dielectric Tester. - Conductor types for the overhead lines (ACSR, AAAC), surge arresters function, insulators (post and

suspension), and underground cable fault distance detector. - Get familiar with substation single line diagram. - Design and planning of small distribution feeders.

Saudi Electricity Company, June 8, 2014 to August 14, 2014

Power plant (PP10), Riyadh

- Training program for safety consideration inside the power plant. - Gas turbine component, combined cycle gas turbine, synchronous generator, permanent magnet

generator (PMG), starting motor, excitation control, fuel control system. - Step up transformers 13.8/380 KV high rated MVA, transformers cooling systems (ONAN, ONAF), step

down transformers, tap changer, voltage transformer (VT), current transformer (CT). - Black start generators, protection system of generators and transformers, plant grounding system. - Turbines operation, generator synchronization procedures, main control panel system. - Get familiar with power plant single line diagram.

Page 2: Electrical-power-engineer-CV

SKILLS

Work on simulation programs: Matlab, OrCad, LTspice, PowerWorld simulator.

Experience in design and simulation of wireless power transmission systems.

Excellent on power system protection.

Good Knowledge in high voltage engineering (HV Lab).

Strong decision-making and the ability to prioritize and plan effectively.

Strong mathematical skills.

Languages: Arabic, English (intermediate).

TRAINING COURSES

Certificate on complete training program and exam passed for six sigma green belt, 14-Dec-2015, Integral

Management Quality Solutions Inc. Florida, U.S.A.

Project Management Professional (PMP), with 35 training hours, October 17 to 22, 2015, Computer & skills

development training center, Riyadh.

PROJECTS

Graduation project “Design of Wireless Power Transfer (WPT) System” with efficient charging for small

and medium scale applications.

Apply six sigma methodology on “Improve the Quality of Heat Loss of the Solar Panels”.

AWARDS

First position award in graduation projects competition of electrical engineering department, January 2016,

graduation project on “Design of Wireless Power Transfer (WPT) System”.

REFERENCES

Dr. Yasin Khan

Associate Professor,

Department of Electrical Engineering

College of Engineering

King Saud University

Ph: +966-1-467-6759

E-mail: [email protected]

Dr. Abdulrahman Alamoud

Professor,

Microelectronics and Photovoltaics

Department of Electrical Engineering

College of Engineering

King Saud University

Ph: +966-1-467-6795

E-mail: [email protected]

Dr. Saad Alghuwainem

Professor,

Department of Electrical Engineering

College of Engineering

King Saud University

Ph: +966-1-467-6754

E-mail: [email protected]