electrical design & manufacture - mackay conveyor … · electrical design & manufacture...
TRANSCRIPT
ELECTRICAL DESIGN & MANUFACTURE
9 Transport Ave,
Paget QLD 4740
www.mcequip.com.au
Ph: (07) 4998 5696
Fax: (07) 4998 5617
MCE offer the capability to provide a complete electrical package, from panel design
through to on site commissioning for conveyor systems and other industrial equipment.
We have designed and manufactured conveyor belt starters, VVVF winch controllers,
pump controllers, distributed control panels, remote solar powered monitoring stations
and provided site commissioning of complex conveyor systems with multiple tripper
drives and installed drive powers up to 4.5MW.
Belt Starter With Remote Isolation
Multi Feed changeover switch
KEY SERVICES:
Design & Engineering
Project Management
Conveyor System Electrics
Panel Manufacture
PLC & SCADA development
Site technical support &
commissioning
Belt Starter Hire
ELECTRICAL PROJECTS UNDERTAKEN:
Dual 350KW Belt Starter with Remote
Isolation
Broadmeadow MG7 PLC / SCADA
development
150KW Pump Station Soft Starter
Solar Powered environmental monitor-
ing stations
DD250 Series Starter with VVVF
winch
Distributed I/O control panels
30KW VVVF Winch controller