ejector range - hasco · from the entire ejector range to suit your individual application. new:...

We can also offer you custom-made parts from the entire ejector range to suit your individual application. NEW: with DLC coating, g6 Toleranz Z 400 /. . . Ejector pin Z 443 /. . . Stepped version for greater stability Z 457 /. . . Ejector sleeve Z 4650 /. . . Flat ejector with corner radii Z 4651 /. . . Flat ejector with 2 corner radii Hot-work steel, nitrided Through nitriding, these ejectors have a hard, wear-resistant surface of up to 950 HV to meet stringent specifications, also in the diecasting segment. Z 41/. . . Ejector pin Z 43 /. . . Ejector pin with conical head Z 44 /. . . Stepped version for greater stability Z 45 /. . . High Precision ejector sleeve Z 46 /. . . Flat ejector HASCO Hasenclever GmbH + Co KG Römerweg 4, D–58513 Lüdenscheid T +49 23 51 957-0, F +49 23 51 957-237 [email protected] Download of CAD files www.hascoshop.com www.hasco.com Z 456 /. . . Wear sleeve Depending on the combination of materials, the standard extension of the ejector may come at the cost of the borehole, which thereby wears out faster. The interchangeable wear sleeve can simply be replaced and is a cost-saving alternative to insert coatings or even post-machining. Z 461/. . . When things get tight This special flat ejector is used with extremely deep ribs. Its leaf width is between 0.4 and 1.0 mm. Z 47/. . . Makes more of standard ejectors To bridge long distances, e.g. in large tools, this extension rod can be used to elongate a standard ejector in a stable manner, making it possible to dispense with special extra long custom manufactured parts. Z 413 /. . . Corrosion- free – ideal for medical and food technology The highly wear-resistant chrome steel 1.4125 reliably prevents traces of rust when processing aggressive plastics. Expensive coatings are superfluous, significantly reducing tool costs and maintenance costs. Z 412 /. . . Plasma- nitrided for maximum wear resistance The black abrasion-resistant oxida- tion layer ensures outstanding dry running properties, making it ideal for use in the food segment and medical technology. Through the use of high-performance lubricating grease A 7002, which has been specially developed for this purpose, an even longer service life can be achieved. Tool steel, hardened The proven standard: fully hardened shaft to 62 +/- 2 HRC with swaged head. Z 40 /. . . Ejector pin Z 42 /. . . Ejector pin with conical head Z 441/. . . Stepped version for greater stability Z 451/. . . High Precision ejector sleeve Z 465 /. . . Flat ejector Ejector range

Upload: others

Post on 15-Mar-2020

4 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

We can also offer you custom-made parts from the entire ejectorrange to suit your individual application.

NEW: with DLC coating, g6 Toleranz

Z 400 /. . . Ejector pinZ 443 /. . . Stepped version for greater stabilityZ 457 /. . . Ejector sleeveZ 4650 /. . . Flat ejector with corner radiiZ 4651 /. . . Flat ejector with 2 corner radii

Hot-work steel, nitrided

Through nitriding, these ejectors have a hard, wear-resistant surface of up to 950 HV to meet stringent specifications, also inthe diecasting segment. Z 41/. . . Ejector pinZ 43 /. . . Ejector pin with conical headZ 44 /. . . Stepped version for greater stabilityZ 45 /. . . High Precision ejector sleeveZ 46 /. . . Flat ejector

HASCO Hasenclever GmbH + Co KGRömerweg 4, D–58513 LüdenscheidT +49 23 51 957-0, F +49 23 51 [email protected]

Download of CAD fileswww.hascoshop.com

www.hasco.com

Z 456 /. . . Wear sleeveDepending on the combination ofmaterials, the standard extension ofthe ejector may come at the cost ofthe borehole, which thereby wearsout faster.

The interchangeable wear sleeve can simply be replacedand is a cost-saving alternative to insert coatings or evenpost-machining.

Z 461/. . . When things get tightThis special flat ejector is used with extremely deep ribs. Its leaf width is between 0.4 and 1.0 mm.

Z 47/. . . Makes more of standard ejectorsTo bridge long distances, e.g. in large tools, this extension rod can be used to elongate a standard

ejector in a stable manner, making it possible to dispensewith special extra long custom manufactured parts.

Z 413 /. . . Corrosion-free – ideal for medicaland food technologyThe highly wear-resistant chrome steel 1.4125 reliably prevents traces of rust when processing

aggressive plastics. Expensive coatings are superfluous, significantly reducingtool costs and maintenance costs.

Z 412 /. . . Plasma-nitrided for maximumwear resistanceThe black abrasion-resistant oxida-tion layer ensures outstanding dryrunning properties, making it ideal

for use in the food segment and medical technology. Through the use of high-performance lubricating grease A 7002, which has been specially developed for this purpose, an even longer service life can be achieved.

Tool steel, hardened

The proven standard: fully hardened shaft to 62 +/- 2 HRC with swaged head.

Z 40 /. . . Ejector pinZ 42 /. . . Ejector pin with conical headZ 441/. . . Stepped version for greater stabilityZ 451/. . . High Precision ejector sleeveZ 465 /. . . Flat ejector

Ejector range