e&i qc engineer

5
CURRICULUM VITAE MUHAMMAD SHOAIB KHAN QA/QC ENGINEER E & I Carrier Objective Seeking for a job an organization where I would utilize my abilities, knowledge, expertise to given responsibilities for better results. To fine a concentrations and honesty. I am confident that I can face challenges and achieved targets/ which are assigned to me. QUALIFICATION ( RD1000+) Portable Ground Penetrating Radar System Certification by QATAR.(2014) B-TECH Honour Electronics from Preston University Islamabad.(2011) B-TECH PASS Electronics from Preston University Islamabad.(2010) D.A.E Electronics from Sargodha Board.(2007) COMPUTER SKIL Primavera (P-6) Microsoft office Excel Microsoft office World SAFETY TRANING I have attended permit to work (PTW) training for Qatar chemical. I have attended ( RD1000+) Portable Ground Penetrating Radar System Training for Ragas. I have attended ISI training for Ras Gas. I have attended H2S training for Ras Gas I have attended AGI training for Ras Gas I have attended H2S training for Qatar Gas. I have attended confined space training CP1 MEP project Lusail city. PERSONAL INFORMATIONS Father’s Name : Saeed Ahmed Khan Date of Birth : 29.03.1985 CNIC. NO. : 38302-1752563-9 1

Upload: muhammad-shoaib-khan

Post on 11-Feb-2017

172 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: E&I QC ENGINEER

CURRICULUM VITAEMUHAMMAD SHOAIB KHAN QA/QC ENGINEER E & I

Carrier Objective

Seeking for a job an organization where I would utilize my abilities, knowledge, expertise to given

responsibilities for better results. To fine a concentrations and honesty. I am confident that I can face

challenges and achieved targets/ which are assigned to me.

QUALIFICATION

( RD1000+) Portable Ground Penetrating Radar System Certification by QATAR.(2014) B-TECH Honour Electronics from Preston University Islamabad.(2011) B-TECH PASS Electronics from Preston University Islamabad.(2010) D.A.E Electronics from Sargodha Board.(2007)

COMPUTER SKIL Primavera (P-6)

Microsoft office Excel

Microsoft office World

SAFETY TRANING

I have attended permit to work (PTW) training for Qatar chemical.

I have attended ( RD1000+) Portable Ground Penetrating Radar System Training for Ragas.

I have attended ISI training for Ras Gas.

I have attended H2S training for Ras Gas

I have attended AGI training for Ras Gas

I have attended H2S training for Qatar Gas.

I have attended confined space training CP1 MEP project Lusail city.

PERSONAL INFORMATIONS

Father’s Name : Saeed Ahmed Khan

Date of Birth : 29.03.1985

CNIC. NO. : 38302-1752563-9

Religion : Islam

Email Address: [email protected]

Marital Status : Married

P. Address : House No F-1/3-4 Housing colony Iskanderabad Distt. Mianwali

Contact No. : +974-55670087 & +92-3347638288,

Passport Number EH519563

1

Page 2: E&I QC ENGINEER

PROFILE

6 years of working experience as a E&I QA/QC Inspector/Engineer at various Oil, Gas, civil and MEP projects both in Pakistan as well as in gulf.

Responsibilities:

Daily meeting with Site In charge discuss about the daily work activities. ALL Material Receiving Inspection of Instrument & Electrical for Site Installation

Work Activities. Plan the daily activities and execute in the field. Co ordinate with Client and discuss about the going on work activities. Obtaining the Permit to Work and Execute the job as per Ras Gas procedures. Preparation of job safety analysis (JSA) according to the job and site safety

requirements. Site Inspection of ESDV CONTROL VALVE & ON/OF CONTROL VALVE. Site Inspection of ANALYZER CABINET. Site Inspection of INSTRUMENT WIRELESS ACCESS POINT UNIT. Site Inspection of INSTRUMENT EMRC TUBE , HEAT BUNDLE TUBE. Site Inspection of INSTRUMENT EMRC PROBE, WET O2 PROBE and AP-PROBE Site Inspection of PDB with ANALYZER. Site Inspection and Calibration of different type of PDG with Manifold. Site Inspection of Impulse Tubing Pressure Leak test for PDG with Manifold. Site Inspection and Calibration of different Type Gauges with PRV. Site Inspection of different type of instruments and panels. Inspection Calibration of Control Valve, Flow Transmitter and Pressure Transmitters. Perform the QA/QC job as per RAS GAS requirements and specifications Preparing of INSPECTION TEST PLAN, Inspection Reports and Method Statement. Raised the RFI for inspection. Coordination with Client regarding Electrical Engineering & Execution work. Site Inspection of panels MV, MCC, RPC, VVVF etc. Site Inspection of JBs,DBs,LCS Site Inspection of lightning system Site Inspection of Cable Ladder and cable Tray. Site Inspection of Earthing & Grounding system. Site Inspection of CT, PT, Surge Arrestors, SF6 Circuit Breakers & Motors Site Megger Test of MV, LV Cables & panels. Torque Test of Cts, PTs and Bus Bars of MVs & Cables. Signal Loop Testing of Control panels & Cables. Oil Dehydration test of Transformer. Hi-pot test of MV cables. Testing and commissioning of Substation panels. Inspection of all electrical equipments related to Cement Factory including

Transformers, HV and MV Panels, MCCs, Panel

2

Page 3: E&I QC ENGINEER

OVERSEAS WORK EXPERIENCE

Project : Descon Engineering limited from Qatar with CHIYODA ALMANA. From: 21-09-2014 to till date.. Client: Ras Gas Qatar (Natural Gas Purification & Liquefying Company Qatar Response ability: QA/QC Engineer

Shut Down : Descon Engineering limited from Qatar with CHIYODAALMANA. From: 25-08-2014 to 19-09-2014.. Client: Ras Gas Qatar (Natural Gas Purification & Liquefying Company Qatar Response ability: QA/QC Engineer

Project : Descon Engineering limited from Qatar with CHIYODA ALMANA. From: 07.06.2014 to 20-08-2014.. Client: Ras Gas Qatar (Natural Gas Purification & Liquefying Company Qatar Response ability: QA/QC Inspector

Shut Down work : Descon engineering limited from Qatar with QAFAC. From: 01.02.2014 to 10.04.2014 Client: QAFAC Response ability: QA/QC Inspector

Project : Descon engineering limited from Qatar Lusail City CP1 (MEP) From: 31.05.2012 to 01.01.2014.

Client: SINOHYDRO CORPORATION Response ability: QA/QC Inspector

Shut Down work : Descon engineering limited from Qatar Chemicals. From: 19.02.2012 to 19.03.2012. Client: Qatar Chemicals Response ability: QA/QC Inspector

WORK EXPERIENCE IN PAKISTAN

Project : Descon Engineering limited with Fuji cement plant project From: 01.01.2009 to 01.03.2011. CLIENT: ABB Response ability: QA/QC ENGINEER

3