effective: 11/12/07 subject to change without notice high purity piping...

ASAHI/AMERICA, INC. 1 HP-1107Rev A

High PurityPiping Systems

List Price Sheet#HP-1107A

35 Green Street, PO Box 653, Malden, MA 02148Tel: (781) 321-5409 - Toll Free: (800) 343-3618 - Fax: (800) 787-6861

www.asahi-america.com - [email protected] Sales: East (800) 232-7244 / Central (800) 442-7244 / West (800) 282-7244

ASAHI/AMERICAEFFECTIVE: 11/12/07

SUBJECT TO CHANGE WITHOUT NOTICEA________________C________________

PolyPure PPN Piping System Purad UHP PVDF Piping System

TM

TM


POLYPUREPolyPure Specification

IR/Butt Fusion

Pipe, 90 Elbow, 45 Elbow, Stub End & TeeExtended Leg Reducer, Machined Flush ReducerFabricated Reducers TeesUnion, Male & Female Adapter, Sanitary & Flare Adapter & CapInstrumentation Fitting, Probe Adapter

Socket Fusion

90 Elbow, 45 Elbow, Coupling, Tee, Stub End, Union, End CapReducer & Reducing Tee

Valves

T342 Diaphragm ValvesT343 Diaphragm ValvesBall Valves, Needle Valves

Page 5

Page 6Page 7Page 8Page 9Page 10

Page 11Page 12

Page 13Page 14Page 15

T M

Table of Contents HIGH PURITY PIPING SYSTEMS


PURADPurad Specification

IR/Butt Fusion

Pipe90 Elbows, 45 ElbowTeesStub End, Flange AdapterReducer Extended LegMachined Flush ReducerStepped Concentric Reducer & Reducing TeeFabricated Reducing TeeFlush Reducing TeeUnion Fitting, Union Blank, Sanitary, Male, Female AdapterFlare Adapter, Cap, Restraint FittingsInstrumentation FittingsProbe Adapter & Hose Barb

Socket Fusion

Pipe, 90 Elbow, 45 Elbow, Coupling, TeeStub End, Female & Male Adapter, End Cap, Reducer

Valves & Regulators

T342 Diaphragm ValvesT343 Diaphragm ValvesSampling, Angle Needle, T-21 Ball, and Ball Check ValvesPressure RegulatorsM123 & M23 Flowmeters and Z700 Gauge Guard

ACCESSORIESBacking RingsGasketsDiaphragm Valve AccessoriesCustom Fabrication

WELDING EQUIPMENTSP110 EquipmentRental Rates

Table of Contents HIGH PURITY PIPING SYSTEMS

Page 17

Page 18Page 19Page 20Page 21Page 22Page 23Page 24Page 25Page 26Page 27Page 28Page 290

Page 31Page 32

Page 33Page 34Page 36Page 37Page 38

Page 40Page 41Page 42Page 43

Page 45Page 46

T M


PolyPurePPN Piping System

Cost Effective Purity

TM


PolyPure Natural Polypropylene SPECIFICATIONST M

MaterialColorDensityLinear Expansion CoefficientModulus of ElasticityThermal ConductivitySurface Resistance

Dimensions

Pressure Rating

Temperature Rating -5oC (23oF) to 95oC (203oF)

Production

Surface Finish(not valid for Socket fittings)

Testing & InspectionISO 15494

Conformance

Welding Technology

Packaging & Marking

Main Applications

Polypropylene Random CopolymerNatural0.91 g/cm3 (ISO 1183)1.6 K-1 x 10-4 (DIN 53752)900 MPa (ISO 527)0.24 W/(mxK) (DIN 52612)>1013 OHM (VDE 0303)

20mm (1/2") - 110mm (4")ISO 15494Pipes & Fittings: SDR 11 (150PSI)Valves: 150 PSIPressure ratings valid at 68oF (20oC)

Pipes: Extruded from virgin PP-R resin material ondesignated equipment in clean environmentFittings & Valves: Molded from virgin PP-R resin material ondesignated equipment in clean environment

Leach Out TestingPressure TestingDimensional ToleranceSurface FinishVisual Inspection

FDA CFR 21 177.1520Physiologically non-toxic (EEC 90/128)HB Flammability Rating (UL94)

Infrared Fusion (Recommended)Beadless FusionContact Butt FusionSocket Fusion 20mm - 63mm (1/2" - 2")

Pipe ends are sealed immediately after production with PEfilm and PE caps, placed in PE sleeves and sealed.Fittings & Valves are single bagged.All HP components are marked according to ISO 10931with material, size, pressure rating and manufacturing lot.Pipe size 20mm - 32 mm (1/2 - 1”) is bagged with multiplelength per bag.

PolyPure Natural PP piping systems are acost-effective alternative to stainless steel andPVDF materials for Pure Water systems.

Inner Ra <1.0μm -sizes 20 - 40 mm (1/2” - 1-1/4”)Inner Ra <0.8μm -sizes 50 - 110 mm (1-1/2” - 4”)


STUB END (FLANGE ADAPTER) - ANSI

mm inch20 1/2 6330005 8.70$ 25 3/4 6330007 8.70$ 32 1 6330010 10.20$ 40 1-1/4 6330012 11.50$ 50 1-1/2 6330015 14.00$ 63 2 6330020 17.50$ 90 3 6330030 29.50$

110 4 6330040 38.10$ Requires Backing Ring, page 40

PART # LISTSIZE

TEE

mm inch PART # LIST PART # LIST20 1/2 6318005 6.10$ 6319005* 9.00$ 25 3/4 6318007 6.10$ 6319007* 13.10$ 32 1 6318010 7.60$ 6319010* 16.40$ 40 1-1/4 6318012 11.40$ - -50 1-1/2 6318015 15.40$ - -63 2 6318020 23.90$ - -90 3 6318030 71.80$ - -

110 4 6318040 105.40$ - -Custom molded item, non-returnable / non-cancelable.

EXTENDED LEGSIZE STANDARD

45 ELBOW

mm inch20 1/2 6314005 11.40$ 25 3/4 6314007 12.30$ 32 1 6314010 14.80$ 40 1-1/4 6314012 17.40$ 50 1-1/2 6314015 19.70$ 63 2 6314020 36.00$ 90 3 6314030 56.10$

110 4 6314040 107.50$

LISTSIZE PART #

PolyPure Natural Polypropylene IR / BUTT FUSION PIPE & FITTINGST M

PIPE

mm inch20 1/2 6301005 11.50$ 25 3/4 6301007 15.80$ 32 1 6301010 22.00$ 40 1-1/4 6301012 33.90$ 50 1-1/2 6301015 52.60$ 63 2 6301020 83.40$ 90 3 6301030 162.40$

110 4 6301040 241.90$ Sold in 5m Lengths Only (5m = 16.4ft)1/2" Sold in Qty's of 5, 3/4" in Qty's of 4, 1" Qty's of 3

LISTPART #SIZE90 EXTENDED LEG ELBOW

mm inch20 1/2 6302005 7.10$ 25 3/4 6302007 7.40$ 32 1 6302010 7.60$ 40 1-1/4 6302012 9.30$ 50 1-1/2 6302015 11.70$ 63 2 6302020 16.70$ 90 3 6302030 33.40$

110 4 6302040 63.60$

PART # LISTSIZE


MACHINED FLUSH REDUCER

mm inch40 x 20 1-1/4 x 1/2 6348166 245.50$ 40 x 25 1-1/4 x 3/4 6348167 245.50$ 50 x 20 1-1/2 x 1/2 6348208 247.70$ 50 x 25 1-1/2 x 3/4 6348210 247.70$ 63 x 20 2 x 1/2 6348246 333.70$ 63 x 25 2 x 3/4 6348248 333.70$ 90 x 20 3 x 1/2 6348332 427.30$ 90 x 25 3 x 3/4 6348333 427.30$ 90 x 32 3 x 1 6348336 427.30$ 90 x 40 3 x 1-1/4 6348335 427.30$ 90 x 50 3 x 1-1/2 6348337 427.30$

110 x 20 4 x 1/2 6348399 448.00$ 110 x 25 4 x 3/4 6348404 448.00$ 110 x 32 4 x 1 6348401 448.00$ 110 x 40 4 x 1-1/4 6348412 448.00$ 110 x 50 4 x 1-1/2 6348415 448.00$

Machined items are non-returnable / non-cancelable

SIZE PART # LIST

REDUCER EXTENDED LEG

mm inch25 x 20 3/4 x 1/2 6338101 7.60$ 32 x 20 1 x 1/2 6338130 8.40$ 32 x 25 1 x 3/4 6338131 8.40$ 40 x 20 1-1/4 x 1/2 6338166* 130.00$ 40 x 25 1-1/4 x 3/4 6338167* 130.00$ 40 x 32 1-1/4 x 1 6338168 11.80$ 50 x 20 1-1/2 x 1/2 6338208* 131.20$ 50 x 25 1-1/2 x 3/4 6338210 15.20$ 50 x 32 1-1/2 x 1 6338211 15.20$ 50 x 40 1-1/2 x 1-1/4 6338212* 131.20$ 63 x 20 2 x 1/2 6338246* 133.10$ 63 x 25 2 x 3/4 6338248* 133.10$ 63 x 32 2 x 1 6338249 19.00$ 63 x 40 2 x 1-1/4 6338250* 133.10$ 63 x 50 2 x 1-1/2 6338251 19.00$ 90 x 63 3 x 2 6338338* 213.70$

110 x 63 4 x 2 6338420* 218.50$ 110 x 90 4 x 3 6338422* 218.50$

* Items are fabricated extended leg reducersFabricated items are non-returnable / non-cancelable

PART # LISTSIZE

REDUCER STEPPED CONCENTRIC

mm inch63 x 16 2 x 3/8 6337247 68.00$

110 x 63 4 x 2 6337420 143.80$ Stepped concentric reducer contains all sizes within the rangeSpigot ends are short allowing for one tight weld

SIZE PART # LIST

PolyPure Natural Polypropylene IR / BUTT FUSION FITTINGST M


FABRICATED REDUCING TEE

mm inch25 x 20 3/4 x 1/2 6322101 144.00$ 32 x 20 1 x 1/2 6322130 147.80$ 32 x 25 1 x 3/4 6322131 147.80$ 40 x 20 1-1/4 x 1/2 6322166* 396.20$ 40 x 25 1-1/4 x 3/4 6322167* 396.20$ 40 x 32 1-1/4 x 1 6322168 159.80$ 50 x 20 1-1/2 x 1/2 6322208* 404.40$ 50 x 25 1-1/2 x 3/4 6322210 172.40$ 50 x 32 1-1/2 x 1 6322211 172.40$ 50 x 40 1-1/2 x 1-1/4 6322212* 404.40$ 63 x 20 2 x 1/2 6322246* 529.20$ 63 x 25 2 x 3/4 6322248* 529.20$ 63 x 32 2 x 1 6322249 301.00$ 63 x 40 2 x 1-1/4 6322250* 529.20$ 63 x 50 2 x 1-1/2 6322251 301.00$ 90 x 63 3 x 2 6322338* 690.40$

110 x 63 4 x 2 6322420* 748.20$ 110 x 90 4 x 3 6322422* 748.20$

Fabricated from Tee and Reducer, * items utilize fabricated reducerFabricated items are non-returnable / non-cancelable

PART # LISTSIZEFABRICATED FLUSH REDUCING TEE

mm inch40 x 20 1-1/4 x 1/2 6335166 384.10$ 40 x 25 1-1/4 x 3/4 6335167 384.10$ 50 x 20 1-1/2 x 1/2 6335208 393.00$ 50 x 25 1-1/2 x 3/4 6335210 393.00$ 63 x 20 2 x 1/2 6335246 602.60$ 63 x 25 2 x 3/4 6335248 602.60$ 90 x 20 3 x 1/2 6335332 702.00$ 90 x 25 3 x 3/4 6335333 702.00$ 90 x 32 3 x 1 6335336 702.00$ 90 x 40 3 x 1-1/4 6335335 702.00$ 90 x 50 3 x 1-1/2 6335337 702.00$

110 x 20 4 x 1/2 6335399 779.80$ 110 x 25 4 x 3/4 6335404 779.80$ 110 x 32 4 x 1 6335401 779.80$ 110 x 40 4 x 1-1/4 6335412 779.80$ 110 x 50 4 x 1-1/2 6335415 779.80$

Fabricated from Tee and Machined Flush Reducer.Fabricated items are non-returnable / non-cancelable

PART # LISTSIZE



SANITARY ADAPTERSANITARY

mm inch SIZE20 1/2 3/4 6360005 73.30$ 25 3/4 1 6360007 83.70$ 32 1 1-1/2 6360010 83.70$ 40 1-1/4 1-1/2 6360012 83.70$ 50 1-1/2 2 6360015 97.80$ 63 2 2-1/2 6360020 107.20$

Sanitary Adapters are a machined item, non-returnable / non-cancelable.Designed to fit standard sanitary clamps. Does not include clamp or gasket.

LISTSIZE PART #

CAP

mm inch20 1/2 6343005 8.90$ 25 3/4 6343007 9.70$ 32 1 6343010 12.30$ 40 1-1/4 6343012 15.20$ 50 1-1/2 6343015 19.80$ 63 2 6343020 26.20$ 90 3 6343030* 80.00$

110 4 6343040* 100.00$ *Machined item, non-returnable / non-cancelable.

SIZE PART # LIST

FLARE ADAPTERFLARE

mm inch SIZE20 1/2 1/4 6306096 41.90$ 20 1/2 3/8 6306098 44.70$ 20 1/2 1/2 6306005 48.70$ 25 3/4 3/8 6306106 48.70$ 25 3/4 1/2 6306101 52.80$ 25 3/4 3/4 6306007 60.90$ 32 1 3/8 6306105 62.20$ 32 1 1/2 6306130 62.20$ 32 1 3/4 6306131 69.00$ 32 1 1 6306010 78.50$

LISTSIZE PART #

FEMALE NPT ADAPTER

mm inch20 1/2 6349005 12.20$ 25 3/4 6349007 13.80$ 32 1 6349010 18.10$ 40 1-1/4 6349012 20.70$ 50 1-1/2 6349015 32.60$ 63 2 6349020 40.80$

PART # LISTSIZE

MALE NPT ADAPTER

mm inch20 1/2 6347005 9.60$ 25 3/4 6347007 11.50$ 32 1 6347010 14.50$ 40 1-1/4 6347012 17.40$ 50 1-1/2 6347015 28.60$ 63 2 6347020 36.10$

SIZE PART # LIST


HOSE BARB

mm inch20 1/2 840704000 19.50$

This fitting is designed to be socket welded to 20mm (1/2")or butt welded to 25mm (3/4"). Hose Barb is 1/4" - 1/2"

PART # LISTSIZE

UNION

mm inch PART # LIST PART # LIST20 1/2 6334005 29.20$ 6333005* 29.20$ 25 3/4 6334007 37.00$ 6333007* 37.00$ 32 1 6334010 45.50$ 6333010* 45.50$ 40 1-1/4 6334012 63.50$ 6333012* 63.50$ 50 1-1/2 6334015 88.50$ 6333015* 88.50$ 63 2 6334020 132.30$ 6333020* 132.30$

* Items are non-stock which are non-returnable / non-cancelablePVDF union blanks are available, see page 27

SIZE FKM O-RING EPDM O-RING


INSTRUMENTATION FITTINGTAP

mm inch SIZE20 1/2 SOLID 6304005 214.00$ 20 1/2 1/4 6304096 274.00$ 25 3/4 SOLID 6304007 218.00$ 25 3/4 1/4 6304103 278.00$ 32 1 SOLID 6304010 223.00$ 32 1 1/4 6304104 283.00$ 32 1 1/2 6304130 283.00$ 40 1-1/4 SOLID 6304012 236.00$ 40 1-1/4 1/4 6304159 296.00$ 40 1-1/4 1/2 6304166 296.00$ 50 1-1/2 SOLID 6304015 236.00$ 50 1-1/2 1/4 6304207 296.00$ 50 1-1/2 1/2 6304208 296.00$ 63 2 SOLID 6304020 298.00$ 63 2 1/4 6304244 358.00$ 63 2 1/2 6304246 358.00$ 90 3 SOLID 6304030 310.00$ 90 3 1/4 6304330 370.00$ 90 3 1/2 6304332 370.00$

110 4 SOLID 6304040 350.00$ 110 4 1/4 6304402 410.00$ 110 4 1/2 6304399 410.00$

Instrumentation Fittings are a machined item, non-returnable / non-cancelable.

SIZE PART # LIST

PROBE ADAPTERTAP

mm inch SIZE20 1/2 SOLID 6303005 167.00$ 20 1/2 1/4 6303096 227.00$ 25 3/4 SOLID 6303007 169.00$ 25 3/4 1/4 6303103 229.00$ 25 3/4 1/2 6303101 232.00$ 32 1 SOLID 6303010 172.00$ 32 1 1/4 6303104 232.00$ 32 1 1/2 6303130 232.00$ 40 1-1/4 SOLID 6303012 178.00$ 40 1-1/4 1/4 6303159 238.00$ 40 1-1/4 1/2 6303166 238.00$ 50 1-1/2 SOLID 6303015 178.00$ 50 1-1/2 1/4 6303207 238.00$ 50 1-1/2 1/2 6303208 238.00$ 63 2 SOLID 6303020 224.00$ 63 2 1/4 6303244 284.00$ 63 2 1/2 6303246 284.00$ 90 3 SOLID 6303030 230.00$ 90 3 1/4 6303330 290.00$ 90 3 1/2 6303332 290.00$

110 4 SOLID 6303040 250.00$ 110 4 1/4 6303402 310.00$ 110 4 1/2 6303399 310.00$

Probe Adapters are a machined item, non-returnable / non-cancelable.

SIZE PART # LIST

T MPolyPure Natural Polypropylene IR / BUTT FUSION FITTINGS


END CAP

mm inch20 1/2 6340005 4.50$ 25 3/4 6340007 4.80$ 32 1 6340010 5.40$ 40 1-1/4 6340012 6.90$ 50 1-1/2 6340015 9.00$ 63 2 6340020 12.40$

SIZE PART # LIST

IPS COUPLING ADAPTER

mm inch20 1/2 6329005 35.00$ 25 3/4 6329007 35.00$ 32 1 6329010 35.00$ 40 1-1/4 6329012 40.00$ 50 1-1/2 6329015 40.00$ 63 2 6329020 40.00$

Coupling with IPS socket by metric socket

LISTSIZE PART #

UNION, EPDM O-RING

mm inch20 1/2 6393005 25.90$ 25 3/4 6393007 28.20$ 32 1 6393010 33.90$ 40 1-1/4 6393012 47.90$ 50 1-1/2 6393015 67.80$ 63 2 6393020 92.20$

SIZE PART # LIST

TEE

mm inch20 1/2 6320005 5.60$ 25 3/4 6320007 6.30$ 32 1 6320010 7.70$ 40 1-1/4 6320012 9.60$ 50 1-1/2 6320015 16.10$ 63 2 6320020 23.20$

LISTSIZE PART #

COUPLING

mm inch20 1/2 6328005 3.60$ 25 3/4 6328007 3.70$ 32 1 6328010 4.80$ 40 1-1/4 6328012 6.30$ 50 1-1/2 6328015 9.80$ 63 2 6328020 13.20$

SIZE PART # LIST

45 ELBOW

mm inch20 1/2 6315005 5.80$ 25 3/4 6315007 6.90$ 32 1 6315010 7.80$ 40 1-1/4 6315012 10.10$ 50 1-1/2 6315015 14.00$ 63 2 6315020 17.90$

SIZE PART # LIST

90 ELBOW

mm inch20 1/2 6310005 4.80$ 25 3/4 6310007 5.80$ 32 1 6310010 7.10$ 40 1-1/4 6310012 9.00$ 50 1-1/2 6310015 16.60$ 63 2 6310020 21.60$

SIZE PART # LIST

PolyPure Natural Polypropylene SOCKET FITTINGST M


mm inch20 1/2 6331005 5.10$ 25 3/4 6331007 5.50$ 32 1 6331010 6.00$ 40 1-1/4 6331012 7.50$ 50 1-1/2 6331015 8.90$ 63 2 6331020 11.60$

Requires Backing Ring, page 40

SIZE PART # LIST


REDUCING TEE

mm inch25 x 20 3/4 x 1/2 6324101 7.50$ 32 x 20 1 x 1/2 6324130 9.10$ 32 x 25 1 x 3/4 6324131 9.10$ 40 x 25 1-1/4 x 3/4 6324167 10.40$ 40 x 32 1-1/4 x 1 6324168 10.40$ 50 x 25 1-1/2 x 3/4 6324210 16.80$ 50 x 32 1-1/2 x 1 6324211 16.80$ 63 x 32 2 x 1 6324249 24.60$ 63 x 50 2 x 1-1/2 6324251 24.60$

SIZE PART # LIST

REDUCER

mm inch25 x 20 3/4 x 1/2 6339101 4.50$ 32 x 20 1 x 1/2 6339130 5.50$ 32 x 25 1 x 3/4 6339131 5.50$ 40 x 25 1-1/4 x 3/4 6339167 6.60$ 40 x 32 1-1/4 x 1 6339168 7.70$ 50 x 25 1-1/2 x 3/4 6339210 7.70$ 50 x 32 1-1/2 x 1 6339211 7.70$ 50 x 40 1-1/2 x 1-1/4 6339212 7.70$ 63 x 32 2 x 1 6339249 10.60$ 63 x 40 2 x 1-1/4 6339250 10.60$ 63 x 50 2 x 1-1/2 6339251 10.60$

Large size male end, small size female socket

LISTSIZE PART #

PolyPure Natural Polypropylene SOCKET FITTINGST M


T342 DIAPHRAGM VALVE, 2-WAY, MANUAL

mm inch PART # LIST PART # LIST20 1/2 6352005 133.90$ 6351005 $214.0025 3/4 6352007 148.60$ 6351007 $227.8032 1 6352010 171.40$ 6351010 $264.2040 1-1/4 6352012 227.70$ 6351012 $334.3050 1-1/2 6352015 239.70$ 6351015 $401.8063 2 6352020 281.20$ 6351020 $510.70

SIZE EPDM DIAPHRAGM PTFE DIAPHRAGM

T342 DIAPHRAGM VALVE, 2-WAY, A-S NC

mm inch PART # LIST PART # LIST20 1/2 6375005 528.10$ 6376005 615.50$ 25 3/4 6375007 544.10$ 6376007 630.60$ 32 1 6375010 608.50$ 6376010 709.70$ 40 1-1/4 6375012 1,183.70$ 6376012 2,077.20$ 50 1-1/2 6375015 1,196.70$ 6376015 2,150.80$ 63 2 6375020 1,242.00$ 6376020 2,269.60$

T342 ADDITIONAL ACTUATION ORDERING CODESA-S NO A-A A-S NO A-AEPDM EPDM PTFE PTFE

mm inch PART # PART # PART # PART #20 1/2 6370005 6371005 6372005 637300525 3/4 6370007 6371007 6372007 637300732 1 6370010 6371010 6372010 637301040 1-1/4 6370012 6371012 6372012 637301250 1-1/2 6370015 6371015 6372015 637301563 2 6370020 6371020 6372020 6373020

Refer to A-S NC above for pricingA-S NO and A-A are made to order, non-returnable / non-cancelable

PTFE DIAPHRAGM

SIZE

SIZE EPDM DIAPHRAGM

PolyPure Natural Polypropylene VALVES & ACCESSORIEST M


T343 DIAPHRAGM VALVE, ZERO DEADLEG, A-S NC

mm inch PART # LIST PART # LIST20 x 20 1/2 x 1/2 6342005 641.70$ 6344005 857.70$ 32 x 20 1 x 1/2 6342130 792.60$ 6344130 951.50$ 32 x 25 1 x 3/4 6342131 792.60$ 6344131 951.50$ 32 x 32 1 x 1 6342010 792.60$ 6344010 951.50$ 40 x 20 1-1/4 x 1/2 6342166 823.50$ 6344166 974.00$ 40 x 25 1-1/4 x 3/4 6342167 823.50$ 6344167 974.00$ 40 x 32 1-1/4 x 1 6342168 823.50$ 6344168 974.00$ 50 x 20 1-1/2 x 1/2 6342208 859.70$ 6344208 1,000.10$ 50 x 32 1-1/2 x 1 6342211 859.70$ 6344211 1,000.10$ 63 x 32 2 x 1 6342249 887.70$ 6344249 1,027.40$

T343 ADDITIONAL ACTUATION ORDERING CODESA-S NO A-A A-S NO A-AEPDM EPDM PTFE PTFE

mm inch PART # PART # PART # PART #20 x 20 1/2 x 1/2 6377005 6378005 6385005 638600532 x 20 1 x 1/2 6377130 6378130 6385130 638613032 x 25 1 x 3/4 6377131 6378131 6385131 638613132 x 32 1 x 1 6377010 6378010 6385010 638601040 x 20 1-1/4 x 1/2 6377166 6378166 6385166 638616640 x 25 1-1/4 x 3/4 6377167 6378167 6385167 638616740 x 32 1-1/4 x 1 6377168 6378168 6385168 638616850 x 20 1-1/2 x 1/2 6377208 6378208 6385208 638620850 x 32 1-1/2 x 1 6377211 6378211 6385211 638621163 x 32 2 x 1 6377249 6378249 6385249 6386249

Refer to A-S NC above for pricingA-S NO and A-A are made to order, non-returnable / non-cancelable

SIZE


T343 DIAPHRAGM VALVE, ZERO DEADLEG, MANUAL

mm inch PART # LIST PART # LIST20 x 20 1/2 x 1/2 6345005 300.00$ 6346005 553.10$ 32 x 20 1 x 1/2 6345130 340.10$ 6346130 600.00$ 32 x 25 1 x 3/4 6345131 340.10$ 6346131 600.00$ 32 x 32 1 x 1 6345010 340.10$ 6346010 600.00$ 40 x 20 1-1/4 x 1/2 6345166 368.50$ 6346166 600.00$ 40 x 25 1-1/4 x 3/4 6345167 368.50$ 6346167 600.00$ 40 x 32 1-1/4 x 1 6345168 368.50$ 6346168 600.00$ 50 x 20 1-1/2 x 1/2 6345208 401.60$ 6346208 697.90$ 50 x 32 1-1/2 x 1 6345211 401.60$ 6346211 697.90$ 63 x 32 2 x 1 6345249 427.40$ 6346249 730.70$


PolyPure Natural Polypropylene VALVES & ACCESSORIEST M


BALL VALVES, FLARE ENDS, FKM O-RINGS

mm inch20 1/2 6350005 269.40$ 25 3/4 6350007 321.10$ 32 1 6350010 383.00$

Fabricated item, non-returnable / non-cancelable

LISTSIZE PART #

PolyPure Natural Polypropylene VALVES & ACCESSORIES

ANGLE NEEDLE VALVE, FKM O-RING

16mm Butt 1/4" FNPT 6382002 120.40$ 20mm Butt 1/2" FNPT 6382005 150.40$ 1/4" MNPT 1/4" FNPT 6380002 120.40$ 1/2" MNPT 1/2" FNPT 6380005 150.40$

Ideal for use with an Instrumentation Fitting

INLET LISTOUTLET PART#

T M

BALL VALVES, FKM O-RINGS

mm inch PART # LIST PART # LIST PART # LIST20 1/2 6354005 116.00$ 6353005 96.00$ 6355005 85.30$ 25 3/4 6354007 133.30$ 6353007 113.30$ 6355007 102.70$ 32 1 6354010 160.00$ 6353010 140.00$ 6355010 129.30$ 40 1-1/4 6354012 235.70$ 6353012 210.70$ 6355012 200.00$ 50 1-1/2 6354015 241.00$ 6353015 216.00$ 6355015 205.30$ 63 2 6354020 262.30$ 6353020 237.30$ 6355020 226.70$

THREADED ENDSSOCKET ENDSSIZE BUTT ENDS


Ultra High Purity PVDF Piping System


Purad UHP PVDF SPECIFICATIONS

MaterialColorDensityLinear Expansion CoefficientModulus of ElasticityThermal ConductivitySurface Resistance

Dimensions

Pressure Rating

Temperature Rating

Production

Surface Finish(not valid for Socket fittings)

Testing & InspectionISO 15494

Conformance

Welding Technology

Packaging & Marking

Main Applications

Polyvinylidene Fluoride Natural, Solef® UHP ResinNatural1.78 g/cm3 (ISO 1183)1.2 K-1 x 10-4 (DIN 53752)2000 MPa (ISO 527)0.13 W/(mxK) (DIN 52612)>1012 OHM (VDE 0303)

20mm (1/2") - 315mm (12")ISO 15494

Pipes & Fittings: SDR 21 (230PSI) & SDR 33 (150PSI)Valves: 150 PSIPressure ratings valid at 68oF (20oC)

Pipes: Extruded from virgin Solef® UHP resin ondesignated equipment in a Class 100 environment.Valves & Fittings: Molded from virgin Solef® UHP resin ondesignated equipment in a Class 100 environment.

Leach Out TestingPressure TestingDimensional ToleranceSurface FinishVisual InspectionFDA CFR 21 177.2510FM 4910 TestedV-0 Flammability Rating (UL 94)Physiologically non-toxic (EEC 90/128)

Infrared Fusion (Recommended)Beadless FusionHPF Electrofusion 20mm - 63mm (1/2" - 2")Contact Butt FusionSocket Fusion 20mm - 110mm (1/2” - 4”)

Pipe ends are sealed immediately after production in PE filmand PE cap, placed in PE sleeve and heat sealed on eachend in a Class 100 cleanroom. The pipe is then put into arigid PE tubes. Fittings and valves are double bagged withsilicone free antistatic packaging in a Class 100 cleanroom.Socket fusion fittings are single bagged in a PE bag. All HPcomponents are marked according to ISO 10931 withmaterial, size, pressure rating and manufacturing lot.The Purad UHP PVDF piping system is designed specificallyfor use in ultra pure water applications.This system exclusivelyutilizes Solef® UHP resin for all pipe, fittings, valves & resin stock.

T M

-40oC (-40oF) to 140oC (284oF)

Inner Ra <0.15μm (7.80μin) -sizes 20 - 225 mm (1/2” - 9”)Inner Ra <0.40μm (15.70μin) -sizes 250 - 315 mm (10” - 12”)Micropores shall not exceed a size of one micron


PIPE

mm inch PART # LIST / LT LIST / FT PART # LIST / LT LIST / FT20 1/2 5401005 158.70$ 9.68$ - - -25 3/4 5401007 203.40$ 12.40$ - - -32 1 5401010 331.90$ 20.24$ - - -40 1-1/4 5401012 415.60$ 25.34$ - - -50 1-1/2 5401015 644.00$ 39.27$ - - -63 2 5401020 824.20$ 50.26$ - - -75 2-1/2 5401025 1,172.40$ 71.49$ - - -90 3 5403030 1,678.70$ 102.36$ 5401030 1,118.60$ 68.21$

110 4 5403040 2,510.20$ 153.06$ 5401040 1,662.70$ 101.38$ 160 6 5403060 5,261.30$ 320.81$ 5401060 3,429.40$ 209.11$ 200 8 5403080 8,117.60$ 494.98$ 5401080 5,436.10$ 331.47$ 225 9 5403090 10,333.20$ 630.07$ 5401090 6,765.10$ 412.51$ 250 10 5403100 12,645.50$ 771.07$ 5401100 8,383.40$ 511.18$ 315 12 - - - 5401120 13,252.90$ 808.10$

Supplied in 5 Meter Lengths (16.4')

160mm (6") thru 315mm (12") is non-returnable / non-cancelable

SIZE 150 PSI / PN 10SDR 21

230 PSI / PN 16SDR 33

Purad UHP PVDF IR / BUTT FUSION PIPET M


45 ELBOW

mm inch PART # LIST PART # LIST20 1/2 5414005 15.60$ - -25 3/4 5414007 17.20$ - -32 1 5414010 25.30$ - -40 1-1/4 5414012 40.10$ - -50 1-1/2 5414015 52.80$ - -63 2 5414020 83.80$ - -75 2-1/2 5414025* 207.30$ - -90 3 5416030 300.70$ 5414030 257.50$

110 4 5416040 432.60$ 5414040 334.70$ 160 6 5416060 1,011.10$ 5414060 867.30$ 200 8 5416080* 1,150.00$ 5414080* 822.90$ 225 9 5416090* 1,420.10$ 5414090* 985.00$ 250 10 5416010* 1,702.10$ 5414100* 1,182.40$ 315 12 - - 5414120* 1,776.20$

* Items are fabricated from pipe utilizing contact butt fusion.

* Items are non- returnable / non-cancelable

150 PSI / PN 10SIZE 230 PSI / PN 16SDR 21 SDR 33

90 ELBOW

mm inch PART # LIST PART # LIST160 6 5410060 1,049.80$ 5407060 773.20$ 200 8 5410080 1,471.60$ 5407080 1,082.10$ 225 9 5410090 1,745.10$ 5407090 1,283.30$ 250 10 5410100 2,156.70$ 5407100 1,586.10$ 315 12 - - 5407120 2,682.80$

SDR 21 SDR 33SIZE 230 PSI / PN 16 150 PSI / PN 10

Purad UHP PVDF IR / BUTT FUSION FITTINGST M

90 EXTENDED LEG ELBOW

mm inch PART # LIST PART # LIST20 1/2 5402005 10.50$ - -25 3/4 5402007 14.10$ - -32 1 5402010 27.70$ - -40 1-1/4 5402012 43.50$ - -50 1-1/2 5402015 65.80$ - -63 2 5402020 110.80$ - -75 2-1/2 5402025 188.70$ - -90 3 5402030 314.50$ 5429030 256.30$

110 4 5402040 471.60$ 5429040 345.30$

SDR 33SIZE 230 PSI / PN 16 150 PSI / PN 10

SDR 21


TEE


110 4 5421040 490.80$ 5418040 375.50$ 160 6 5421060 1,083.50$ 5418060 833.60$ 200 8 5421080 1,559.60$ 5418080 1,146.70$ 225 9 5421090 1,997.60$ 5418090 1,469.20$ 250 10 5421100 3,738.40$ 5418100 1,829.10$ 315 12 - - 5418120 3,375.40$

SIZE 230 PSI / PN 16 150 PSI / PN 10SDR 21 SDR 33

TEE EXTENDED LEG

mm inch PART # LIST20 1/2 5419005 38.00$ 25 3/4 5419007 44.00$ 32 1 5419010 52.70$

SDR 21230 PSI / PN 16SIZE





110 4 5470040 203.30$ 5430040 194.10$ 160 6 5470060 807.20$ 5430060 598.20$ 200 8 5470080 1,373.50$ 5430080 1,010.10$ 225 9 5470090 1,465.40$ 5430090 1,077.50$ 250 10 5470100 1,952.50$ 5430100 1,292.50$ 315 12 - - 5430120 1,923.30$

Requires Backing Ring, See Page 40

9" Stub End ues 8" Backing Ring




REDUCER EXTENDED LEG

mm inch PART # LIST PART # LIST PART # LIST25 x 20 3/4 x 1/2 5424101 15.70$ - - - -32 x 20 1 x 1/2 5424130 20.90$ - - - -32 x 25 1 x 3/4 5424131 20.90$ - - - -40 x 20 1-1/4 x 1/2 5424166 26.20$ - - - -40 x 25 1-1/4 x 3/4 5424167 26.20$ - - - -40 x 32 1-1/4 x 1 5424168 28.00$ - - - -50 x 20 1-1/2 x 1/2 5424208 29.40$ - - - -50 x 25 1-1/2 x 3/4 5424210 30.80$ - - - -50 x 32 1-1/2 x 1 5424211 30.80$ - - - -50 x 40 1-1/2 x 1-1/4 5424212 30.80$ - - - -63 x 25 2 x 3/4 5424248 42.80$ - - - -63 x 32 2 x 1 5424249 44.60$ - - - -63 x 40 2 x 1-1/4 5424250 44.60$ - - - -63 x 50 2 x 1-1/2 5424251 44.60$ - - - -75 x 50 2-1/2 x 1-1/2 5424291 86.90$ - - - -75 x 63 2-1/2 x 2 5424292 86.90$ - - - -90 x 50 3 x 1-1/2 5424332 108.00$ - - - -90 x 63 3 x 2 5424338 112.40$ 5494338 110.70$ - -90 x 75 3 x 2-1/2 5424339 113.50$ - - - -

110 x 63 4 x 2 5424420 135.90$ 5494420 132.60$ - -110 x 90 4 x 3 5424422 138.10$ - - 5497422 138.10$ 160 x 110 6 x 4 5424532 308.10$ 5494532 308.10$ 5497532 308.10$ 225 x 160 9 x 6 5424606 997.50$ - - 5497606 997.50$ 250 x 160 10 x 6 5424627 1,070.90$ - - 5497627 1,070.90$ 250 x 225 10 x 9 5424629 1,146.30$ - - 5497629 1,146.30$ 315 x 160 12 x 6 - - - - 5497659 1,242.50$ 315 x 250 12 x 10 - - - - 5497630 1,457.00$

SDR 21 SDR 33 x SDR 21 SDR 33SIZE 230 PSI / PN 16 150x230 PSI / PN 16x10 150 PSI / PN 10




MACHINED FLUSH REDUCER

mm inch PART # LIST PART # LIST PART # LIST40 x 20 1-1/4 x 1/2 5448166 270.00$ - - - -40 x 25 1-1/4 x 3/4 5448167 270.00$ - - - -40 x 32 1-1/4 x 1 5448168 270.00$ - - - -50 x 20 1-1/2 x 1/2 5448208 286.00$ - - - -50 x 25 1-1/2 x 3/4 5448210 286.00$ - - - -50 x 32 1-1/2 x 1 5448211 286.00$ - - - -50 x 40 1-1/2 x 1-1/4 5448212 286.00$ - - - -63 x 20 2 x 1/2 5448246 400.00$ - - - -63 x 25 2 x 3/4 5448248 400.00$ - - - -63 x 40 2 x 1-1/4 5448250 400.00$ - - - -63 x 50 2 x 1-1/2 5448251 400.00$ - - - -75 x 32 2-1/2 x 1 5448289 500.00$ - - - -75 x 40 2-1/2 x 1-1/4 5448290 500.00$ - - - -75 x 50 2-1/2 x 1-1/2 5448291 500.00$ - - - -75 x 63 2-1/2 x 2 5448292 500.00$ - - - -90 x 20 3 x 1/2 5448332 544.00$ 5436332 544.00$ - -90 x 25 3 x 3/4 5448333 544.00$ 5436333 544.00$ - -90 x 32 3 x 1 5448336 544.00$ 5436336 544.00$ - -90 x 40 3 x 1-1/4 5448335 544.00$ 5436335 544.00$ - -90 x 50 3 x 1-1/2 5448337 544.00$ 5436337 544.00$ - -

110 x 20 4 x 1/2 5448399 640.00$ 5436399 640.00$ - -110 x 25 4 x 3/4 5448404 640.00$ 5436404 640.00$ - -110 x 32 4 x 1 5448401 640.00$ 5436401 640.00$ - -110 x 40 4 x 1-1/4 5448412 640.00$ 5436412 640.00$ - -110 x 50 4 x 1-1/2 5448415 640.00$ 5436415 640.00$ - -160 x 32 6 x 1 - - 5436516 1,100.00$ - -200 x 63 8 x 2 - - 5436581 1,391.00$ - -200 x 90 8 x 3 - - 5436582 1,391.00$ 5438582 1,391.00$ 200 x 110 8 x 4 - - 5436583 1,391.00$ 5438583 1,391.00$ 200 x 160 8 x 6 - - 5436585 1,391.00$ 5438585 1,391.00$

Machined items are non-returnable / non-cancelable.



REDUCING TEE

mm inch PART # LIST PART # LIST PART # LIST63 x 32 2 x 1 5422249 230.90$ - - - -90 x 63 3 x 2 5422338 695.00$ 5420339 382.70$ - -

110 x 63 4 x 2 5422420 611.40$ 5420420 593.00$ - -110 x 90 4 x 3 5422422 610.40$ - - 5431422 619.20$ 160 x 63 6 x 2 5422530 1,139.70$ 5420530 1,079.00$ - -160 x 90 6 x 3 5422531 1,136.10$ 5420531 1,136.10$ 5431531 1,095.30$ 160 x 110 6 x 4 5422532 1,191.90$ 5420532 1,191.90$ 5431532 1,144.30$


STEPPED CONCENTRIC REDUCER

mm inch PART # LIST PART # LIST63 x 16 2 X 3/8 5437247 100.00$ - -

110 x 63 4 X 2 5437420 126.10$ - -160 x 110 6 X 4 - - 5437532 268.20$ 225 x 160 9 X 6 - - 5437585 401.00$ 315 x 225 12 X 9 - - 5437670 666.40$

Stepped concentric reducer contains all sizes within the range

Spigot ends are short allowing for one tight weld




FABRICATED REDUCING TEE

mm inch PART # LIST PART # LIST PART # LIST25 x 20 3/4 x 1/2 5422101 118.00$ - - - -32 x 20 1 x 1/2 5422130 133.10$ - - - -32 x 25 1 x 3/4 5422131 133.10$ - - - -40 x 20 1-1/4 x 1/2 5422166 157.50$ - - - -40 x 25 1-1/4 x 3/4 5422167 157.50$ - - - -40 x 32 1-1/4 x 1 5422168 157.50$ - - - -50 x 20 1-1/2 x 1/2 5422208 165.90$ - - - -50 x 25 1-1/2 x 3/4 5422210 167.30$ - - - -50 x 32 1-1/2 x 1 5422211 167.30$ - - - -50 x 40 1-1/2 x 1-1/4 5422212 167.30$ - - - -63 x 25 2 x 3/4 5422248 243.40$ - - - -63 x 32 2 x 1 - - - -63 x 40 2 x 1-1/4 5422250 245.20$ - - - -63 x 50 2 x 1-1/2 5422251 245.20$ - - - -75 x 50 2-1/2 x 1-1/2 5422291 437.20$ - - - -75 x 63 2-1/2 x 2 5422292 437.20$ - - - -90 x 50 3 x 1-1/2 5422332 623.90$ - - - -90 x 63 3 x 2 - -90 x 75 3 x 2-1/2 5422339 629.40$ - - - -110 x 63 4 x 2 - -110 x 90 4 x 3 - -

160 x 110 6 x 4225 x 160 9 x 6 5422606 3,155.10$ - - 5431606 2,626.70$ 250 x 160 10 x 6 5422627 4,969.30$ - - 5431627 3,060.00$ 250 x 225 10 x 9 5422629 5,044.70$ - - 5431629 3,135.40$ 315 x 160 12 x 6 - - - - 5431659 4,777.90$ 315 x 250 12 x 10 - - - - 5431630 4,992.40$ Fabricated from molded Tee and Molded Extended Leg Reducer, non-returnable / non-cancelable.


Molded Available!

Molded Available! Molded Available!

Molded Available! Molded Available!Molded Available! Molded Available!Molded Available! Molded Available! Molded Available!




FLUSH REDUCING TEE

mm inch PART # LIST PART # LIST PART # LIST40 x 20 1-1/4 x 1/2 5435166 401.30$ - - - -40 x 25 1-1/4 x 3/4 5435167 401.30$ - - - -40 x 32 1-1/4 x 1 5435168 401.30$ - - - -50 x 20 1-1/2 x 1/2 5435208 422.50$ - - - -50 x 25 1-1/2 x 3/4 5435210 422.50$ - - - -50 x 32 1-1/2 x 1 5435211 422.50$ - - - -50 x 40 1-1/2 x 1-1/4 5435212 422.50$ - - - -63 x 20 2 x 1/2 5435246 600.60$ - - - -63 x 25 2 x 3/4 5435248 600.60$ - - - -63 x 40 2 x 1-1/4 5435250 600.60$ - - - -63 x 50 2 x 1-1/2 5435251 600.60$ - - - -75 x 32 2-1/2 x 1 5435289 850.30$ - - - -75 x 40 2-1/2 x 1-1/4 5435290 850.30$ - - - -75 x 50 2-1/2 x 1-1/2 5435291 850.30$ - - - -75 x 63 2-1/2 x 2 5435292 850.30$ - - - -90 x 20 3 x 1/2 5435332 1,059.90$ 5425332 1,059.90$ - -90 x 25 3 x 3/4 5435333 1,059.90$ 5425333 1,059.90$ - -90 x 32 3 x 1 5435336 1,059.90$ 5425336 1,059.90$ - -90 x 40 3 x 1-1/4 5435335 1,059.90$ 5425335 1,059.90$ - -90 x 50 3 x 1-1/2 5435337 1,059.90$ 5425337 1,059.90$ - -110 x 20 4 x 1/2 5435399 1,250.80$ 5425399 1,250.80$ - -110 x 25 4 x 3/4 5435404 1,250.80$ 5425404 1,250.80$ - -110 x 32 4 x 1 5435401 1,250.80$ 5425401 1,250.80$ - -110 x 40 4 x 1-1/4 5435412 1,250.80$ 5425412 1,250.80$ - -110 x 50 4 x 1-1/2 5435415 1,250.80$ 5425415 1,250.80$ - -160 x 32 6 x 1 - - 5425516 2,093.60$ - -200 x 63 8 x 2 - - 5425581 2,697.70$ - -200 x 90 8 x 3 - - 5425582 2,697.70$ 5432582 2,697.70$

200 x 110 8 x 4 - - 5425583 2,697.70$ 5432583 2,697.70$ 200 x 160 8 x 6 - - 5425585 2,697.70$ 5432585 2,697.70$ Fabricated from molded Tee and Machined Flush Reducer, non-returnable / non-cancelable.

Multiple configurations available, consult factory for pricing



SANITARY ADAPTER

SANITARYmm inch SIZE PART # LIST20 1/2 3/4 5445005 109.20$ 25 3/4 1 5445007 112.70$ 32 1 1-1/4 5440010 122.90$ 40 1-1/4 1-1/2 5440012 122.90$ 50 1-1/2 2 5440015 129.70$ 63 2 2-1/2 5440020 145.50$

Sanitary Adapters are a machined item, non-returnable / non-cancelable.

Designed to fit standard sanitary clamps. Does not include clamp or gasket.

SDR 21SIZE 230 PSI / PN 16

UNION BLANK

mm inch PART # LIST20 1/2 5474005 62.00$ 25 3/4 5474007 62.00$ 32 1 5474010 65.20$ 40 1-1/4 5474012 65.20$ 50 1-1/2 5474015 68.20$ 63 2 5474020 77.80$

230 PSI / PN 16SDR 21

SIZE

MALE ADAPTER

mm inch PART # LIST20 1/2 5447005 17.70$ 25 3/4 5447007 20.50$ 32 1 5447010 31.40$ 40 1-1/4 5447012 38.20$ 50 1-1/2 5447015 58.20$ 63 2 5447020 74.10$


FEMALE ADAPTER

mm inch PART # LIST20 1/2 5449005 20.50$ 25 3/4 5449007 23.90$ 32 1 5449010 35.30$ 40 1-1/4 5449012 41.70$ 50 1-1/2 5449015 65.10$ 63 2 5449020 79.90$



UNION FITTING

mm inch PART # LIST PART # LIST20 1/2 5434005 50.00$ 5405005 70.00$ 25 3/4 5434007 63.30$ 5405007 88.70$ 32 1 5434010 77.90$ 5405010 109.00$ 40 1-1/4 5434012 108.60$ 5405012 152.10$ 50 1-1/2 5434015 151.50$ 5405015 212.20$ 63 2 5434020 226.50$ 5405020 317.00$

SDR 21 / 230 PSI / PN 16SIZE FKM O-RINGS PTFE O-RINGS


RESTRAINT FITTING

mm inch PART # LIST PART # LIST20 1/2 5461005* 165.00$ - -25 3/4 5461007* 185.00$ - -32 1 5461010 100.00$ - -40 1-1/4 5461012* 235.00$ - -50 1-1/2 5461015* 285.00$ - -63 2 5461020 200.00$ - -75 2-1/2 5461025* 445.00$ - -90 3 5461030 252.10$ 5471030 238.00$

110 4 5461040 374.50$ 5471040 352.80$ 160 6 5461060 845.60$ 5471060 807.50$

*Machined item, non-returnable / non-cancelable.


FLARE ADAPTER

FLAREmm inch SIZE PART # LIST20 1/2 1/4 5406096 55.90$ 20 1/2 3/8 5406098 59.90$ 20 1/2 1/2 5406005 64.90$ 25 3/4 3/8 5406106 64.90$ 25 3/4 1/2 5406101 70.40$ 25 3/4 3/4 5406007 74.00$ 32 1 1/2 5406130 83.00$ 32 1 3/8 5406105 82.80$ 32 1 3/4 5406131 92.00$ 32 1 1 5406010 104.60$ 40 1-1/4 1/2 5406166 268.60$



CAP


110 4 5444040 146.00$ 5443040 92.40$



INSTRUMENTATION FITTING

TAPmm inch SIZE PART # LIST PART # LIST20 1/2 SOLID 5499005 430.00$ - -20 1/2 1/4 5499096 490.00$ - -25 3/4 SOLID 5499007 440.00$ - -25 3/4 1/4 5499103 500.00$ - -32 1 SOLID 5499010 500.00$ - -32 1 1/4 5499104 560.00$ - -32 1 1/2 5499130 560.00$ - -40 1-1/4 SOLID 5499012 510.00$ - -40 1-1/4 1/4 5499159 570.00$ - -40 1-1/4 1/2 5499166 570.00$ - -50 1-1/2 SOLID 5499015 560.00$ - -50 1-1/2 1/4 5499207 620.00$ - -50 1-1/2 1/2 5499208 620.00$ - -63 2 SOLID 5499020 165.00$ - -63 2 1/4 5499244 225.00$ - -63 2 1/2 5499246 225.00$ - -75 2-1/2 SOLID 5499025 750.00$ - -75 2-1/2 1/4 5499283 810.00$ - -75 2-1/2 1/2 5499285 810.00$ - -90 3 SOLID 5492030 280.00$ 5499030 280.00$ 90 3 1/4 5492330 340.00$ 5499330 340.00$ 90 3 1/2 5492332 340.00$ 5499332 340.00$

110 4 SOLID 5492040 380.00$ 5499040 380.00$ 110 4 1/4 5492402 440.00$ 5499402 440.00$ 110 4 1/2 5492399 440.00$ 5499399 440.00$ 160 6 SOLID 5492060 780.00$ 5499060 780.00$ 160 6 1/4 5492509 860.00$ 5499509 860.00$ 160 6 1/2 5492512 860.00$ 5499512 860.00$

Instrumentation Fittings are a machined item, non-returnable / non-cancelable.

SDR 21 SDR 33230 PSI / PN 16 150 PSI / PN 10SIZE



PROBE ADAPTER

TAPmm inch SIZE PART # LIST PART # LIST20 1/2 SOLID 5466005 300.00$ - -20 1/2 1/4 5466096 420.00$ - -25 3/4 SOLID 5466007 302.73$ - -25 3/4 1/4 5466103 423.00$ - -32 1 SOLID 5466010 307.27$ - -32 1 1/4 5466104 428.00$ - -32 1 1/2 5466130 428.00$ - -40 1-1/4 SOLID 5466012 392.73$ - -40 1-1/4 1/4 5466159 522.00$ - -40 1-1/4 1/2 5466166 522.00$ - -50 1-1/2 SOLID 5466015 409.09$ - -50 1-1/2 1/4 5466207 540.00$ - -50 1-1/2 1/2 5466208 540.00$ - -63 2 SOLID 5466020 428.18$ - -63 2 1/4 5466244 561.00$ - -63 2 1/2 5466246 561.00$ - -75 2-1/2 SOLID 5466025 533.64$ - -75 2-1/2 1/4 5466283 677.00$ - -75 2-1/2 1/2 5466285 677.00$ - -90 3 SOLID 5469030 575.45$ 5466030 575.45$ 90 3 1/4 5469330 723.00$ 5466330 723.00$ 90 3 1/2 5469332 723.00$ 5466332 723.00$

110 4 SOLID 5469060 653.64$ 5466040 653.64$ 110 4 1/4 5469402 809.00$ 5466402 809.00$ 110 4 1/2 5469399 809.00$ 5466399 809.00$

Probe Adapters are a machined item, non-returnable / non-cancelable.



HOSE BARB

mm inch20 1/2 840704010 40.00$

This fitting is designed to be socket welded to 20mm (1/2").

Hose Barb is 1/4" - 1/2"

SIZE PART # LIST


TEE

mm inch PART # LIST20 1/2 5985005 16.40$ 25 3/4 5985007 19.80$ 32 1 5985010 29.20$ 40 1-1/4 5985012 45.30$ 50 1-1/2 5985015 68.30$ 63 2 5985020 107.80$ 75 2-1/2 5985025 203.70$ 90 3 5985030 312.80$

110 4 5985040 416.30$

SOCKET (SDR 21)SIZE 230 PSI / PN 16

COUPLING

mm inch PART # LIST20 1/2 5986005 6.80$ 25 3/4 5986007 8.40$ 32 1 5986010 11.00$ 40 1-1/4 5986012 16.40$ 50 1-1/2 5986015 47.30$ 63 2 5986020 67.50$ 75 2-1/2 5986025 69.90$ 90 3 5986030 111.10$

110 4 5986040 194.20$


90 ELBOW

mm inch PART # LIST20 1/2 5991005 9.50$ 25 3/4 5991007 12.30$ 32 1 5991010 23.90$ 40 1-1/4 5991012 37.80$ 50 1-1/2 5991015 56.30$ 63 2 5991020 95.40$ 75 2-1/2 5991025 183.10$ 90 3 5991030 230.40$

110 4 5991040 407.40$


Socket Fusion requiresthe use of SDR21, 230 psi PVDFpipe in all dimensions

Purad UHP PVDF SOCKET FUSION PIPE & FITTINGST M

45 ELBOW

mm inch PART # LIST20 1/2 5988005 11.80$ 25 3/4 5988007 15.70$ 32 1 5988010 18.50$ 40 1-1/4 5988012 31.40$ 50 1-1/2 5988015 36.60$ 63 2 5988020 61.00$ 75 2-1/2 5988025 139.90$ 90 3 5988030 209.80$

110 4 5988040 374.50$


PIPE

mm inch PART # LIST / LT LIST / FT20 1/2 5401005 158.70$ 9.68$ 25 3/4 5401007 203.40$ 12.40$ 32 1 5401010 331.90$ 20.24$ 40 1-1/4 5401012 415.60$ 25.34$ 50 1-1/2 5401015 644.00$ 39.27$ 63 2 5401020 824.20$ 50.26$ 75 2-1/2 5401025 1,172.40$ 71.49$ 90 3 5403030 1,678.70$ 102.36$

110 4 5403040 2,510.20$ 153.06$ Supplied in 5 Meter Lengths (16.4')

160mm (6") thru 315mm (12") is non-returnable / non-cancelable

SIZESDR 21

230 PSI / PN 16


REDUCER

mm inch PART # LIST25 x 20 3/4 x 1/2 5995101 12.80$ 32 x 20 1 x 1/2 5995130 17.50$ 32 x 25 1 x 3/4 5995131 17.50$ 40 x 20 1-1/4 x 1/2 5995166 19.70$ 40 x 25 1-1/4 x 3/4 5995167 20.20$ 40 x 32 1-1/4 x 1 5995168 23.30$ 50 x 20 1-1/2 x 1/2 5995208 24.20$ 50 x 25 1-1/2 x 3/4 5995210 24.20$ 50 x 32 1-1/2 x 1 5995211 24.70$ 50 x 40 1-1/2 x 1-1/4 5995212 25.10$ 63 x 25 2 x 3/4 5995248 35.90$ 63 x 32 2 x 1 5995249 35.90$ 63 x 40 2 x 1-1/4 5995250 36.30$ 63 x 50 2 x 1-1/2 5995251 37.30$ 75 x 63 2-1/2 x 2 5995292 76.30$ 90 x 63 3 x 2 5995338 83.00$ 90 x 75 3 x 2-1/2 5995339 83.50$

110 x 63 4 x 2 5995420 119.00$ 110 x 90 4 x 3 5995422 120.30$

Large size male end, small size female socket


MALE NPT ADAPTER

mm inch PART # LIST20 1/2 5984005 17.60$ 25 3/4 5984007 26.90$ 32 1 5984010 32.80$ 40 1-1/4 5984012 50.00$ 50 1-1/2 5984015 63.70$


FEMALE NPT ADAPTER

mm inch PART # LIST20 1/2 5983005 19.00$ 25 3/4 5983007 25.40$ 32 1 5983010 33.10$ 40 1-1/4 5983012 45.90$ 50 1-1/2 5983015 62.20$ 63 2 5983020 62.40$


END CAP

mm inch PART # LIST20 1/2 5981005 11.30$ 25 3/4 5981007 13.10$ 32 1 5981010 15.70$ 40 1-1/4 5981012 27.20$ 50 1-1/2 5981015 34.20$ 63 2 5981020 51.50$ 75 2-1/2 5981025 56.30$ 90 3 5981030 74.10$

110 4 5981040 107.00$


UNION, FKM O-RING

mm inch PART # LIST20 1/2 5993005 46.80$ 25 3/4 5993007 59.30$ 32 1 5993010 72.90$ 40 1-1/4 5992012 101.80$ 50 1-1/2 5993015 142.00$ 63 2 5993020 212.10$



mm inch PART # LIST20 1/2 5990005 6.80$ 25 3/4 5990007 7.80$ 32 1 5990010 8.40$ 40 1-1/4 5990012 13.60$ 50 1-1/2 5990015 16.10$ 63 2 5990020 23.50$ 75 2-1/2 5990025 67.90$ 90 3 5990030 91.80$

110 4 5990040 128.00$

SIZE 230 PSI / PN 16SOCKET (SDR 21)

Purad UHP PVDF SOCKET FUSION FITTINGST M


T342 DIAPHRAGM VALVE, 2-WAY, ACTUATED, PTFE DIAPHRAGM

A-S NC A-S NO A-A (ALL)mm inch PART # PART # PART # LIST20 1/2 1340005 1349005 1339005 1,643.00$ 25 3/4 1340007 1349007 1339007 1,769.90$ 32 1 1340010 1349010 1339010 1,920.90$ 40 1-1/4 1340012 1349012 1339012 2,718.20$ 50 1-1/2 1340015 1349015 1339015 3,053.40$ 63 2 1340020 1349020 1339020 3,520.70$

Pricing and part numbers are for actuated versions of standard Spigot model.

Consult factory for pricing on True Union or Flange actuated valves.

Actuated 342 valves are non-returnable / non-cancelable.

SIZESDR 21 / 150 PSI / PN 10

Purad UHP PVDF DIAPHRAGM VALVEST M

T342 DIAPHRAGM VALVE, 2-WAY, MANUAL, PTFE DIAPHRAGM

mm inch PART # LIST PART # LIST PART # LIST20 1/2 1131005 360.80$ 1164005 432.90$ 1181005* 432.90$ 25 3/4 1131007 384.00$ 1164007 480.10$ 1181007* 480.10$ 32 1 1131010 425.30$ 1164010 555.80$ 1181010* 555.80$ 40 1-1/4 1131012 606.00$ 1164012 748.60$ 1181012 748.60$ 50 1-1/2 1131015 729.50$ 1164015 906.70$ 1181015 906.70$ 63 2 1131020 924.50$ 1164020 1,202.60$ 1181020 1,202.60$ 75 2-1/2 1131025 2,393.90$ - - 1181025* 2,556.30$ 90 3 1131030 3,029.50$ - - 1181030 3,395.80$

110 4 1131040 3,657.60$ - - 1181040 4,540.80$ *Flanged Diaphragm Valves are fabricated items, non-returnable / non-cancelable.

SIZE STANDARD SPIGOTSDR 21 / 150 PSI / PN 10

TRUE UNION FLANGED



T343 DIAPHRAGM VALVE, ZERO DEADLEG, MANUAL, PTFE DIAPHRAGM

mm inch PART # LIST PART # LIST20 X 20 1/2 X 1/2 1246005 639.20$ - -25 X 20 3/4 X 1/2 1246101 639.20$ - -25 X 25 3/4 X 3/4 1246007 639.20$ - -32 X 20 1 X 1/2 1246130 766.00$ - -32 X 25 1 X 3/4 1246131 766.00$ - -32 X 32 1 X 1 1246010 766.00$ - -40 X 20 1 1/4 X 1/2 1246166 888.80$ - -40 X 25 1 1/4 X 3/4 1246167 888.80$ - -40 X 32 1 1/4 X 1 1246168 888.80$ - -50 X 20 1 1/2 X 1/2 1246208 943.70$ - -50 X 25 1 1/2 X 3/4 1246210 943.70$ - -50 X 32 1 1/2 X 1 1246211 943.70$ - -63 X 20 2 X 1/2 1246246 1,025.40$ - -63 X 25 2 X 3/4 1246248 1,025.40$ - -63 X 32 2 X 1 1246249 1,025.40$ - -63 x 40 2 x 1-1/4 1246250 1,685.90$ - -63 X 50 2 X 1 1/2 1246251 1,685.90$ - -63 X 63 2 X 2 1246020 1,685.90$ - -75 X 25 2 1/2 X 3/4 1246286 1,629.70$ - -75 x 32 2-1/2 x 1 1246289 2,041.40$ - -75 X 40 2 1/2 X 1 1/4 1246290 2,041.40$ - -75 X 50 2 1/2 X 1 1/2 1246291 2,041.40$ - -75 X 63 2 1/2 X 2 1246292 2,041.40$ - -90 x 20 3 x 1/2 1246332 1,939.10$ 1248332 1,939.10$ 90 X 25 3 X 3/4 1246333 2,183.20$ 1248333 1,939.10$ 90 X 32 3 X 1 1246336 2,183.20$ 1248336 1,939.10$ 90 X 40 3 X 1 1/4 1246335 2,663.60$ 1248335 2,530.30$ 90 X 50 3 X 1 1/2 1246337 2,663.60$ 1248337 2,530.30$ 90 X 63 3 X 2 1246338 2,663.60$ 1248338 2,530.30$

110 x 20 4 x 1/2 1246399 2,317.50$ 1248399 2,317.50$ 110 X 25 4 X 3/4 1246404 2,439.80$ 1248404 2,317.50$ 110 X 32 4 X 1 1246401 2,439.80$ 1248401 2,317.50$ 110 X 40 4 X 1-1/4 1246412 2,934.80$ 1248412 2,788.10$ 110 X 50 4 X 1 1/2 1246415 2,934.80$ 1248415 2,788.10$ 110 X 63 4 X 2 1246420 3,469.10$ 1248420 2,788.10$

SIZE 150 PSI / PN 10 150 PSI / PN 10SDR 33 x SDR 21SDR 21


T343 DIAPHRAGM VALVE, ZERO DEADLEG, ACTUATED, PTFE DIAPHRAGM

A-S NC A-S NO A-A (ALL)mm inch PART # PART # PART # LIST

20 X 20 1/2 X 1/2 1317005 1342005 1367005 1,646.50$ 25 X 20 3/4 X 1/2 1317101 1342101 1367101 1,646.50$ 25 X 25 3/4 X 3/4 1317007 1342007 1367007 1,646.50$ 32 X 20 1 X 1/2 1317130 1342130 1367130 1,872.50$ 32 X 25 1 X 3/4 1317131 1342131 1367131 1,872.50$ 32 X 32 1 X 1 1317010 1342010 1367010 1,872.50$ 40 X 20 1 1/4 X 1/2 1317166 1342166 1367166 2,065.10$ 40 X 25 1 1/4 X 3/4 1317167 1342167 1367167 2,065.10$ 40 X 32 1 1/4 X 1 1317168 1342168 1367168 2,065.10$ 50 X 20 1 1/2 X 1/2 1317208 1342208 1367208 2,232.10$ 50 X 25 1 1/2 X 3/4 1317210 1342210 1367210 2,232.10$ 50 X 32 1 1/2 X 1 1317211 1342211 1367211 2,232.10$ 63 X 20 2 X 1/2 1317246 1342246 1367246 2,470.40$ 63 X 25 2 X 3/4 1317248 1342248 1367248 2,470.40$ 63 X 32 2 X 1 1317249 1342249 1367249 2,470.40$ 63 x 40 2 x 1-1/4 1317250 1342250 1367250 3,579.40$ 63 X 50 2 X 1 1/2 1317251 1342251 1367251 3,579.40$ 63 X 63 2 X 2 1317020 1342020 1367020 3,579.40$ 75 X 25 2 1/2 X 3/4 1317286 1342286 1367286 3,316.40$ 75 x 32 2-1/2 x 1 1317289 1342289 1367289 3,316.40$ 75 X 40 2 1/2 X 1 1/4 1317290 1342290 1367290 4,656.40$ 75 X 50 2 1/2 X 1 1/2 1317291 1342291 1367291 4,656.40$ 75 X 63 2 1/2 X 2 1317292 1342292 1367292 4,656.40$ 90 x 20 3 x 1/2 1317332 1342332 1367332 3,727.70$ 90 X 25 3 X 3/4 1317333 1342333 1367333 3,727.70$ 90 X 32 3 X 1 1317336 1342336 1367336 3,727.70$ 90 X 40 3 X 1 1/4 1317335 1342335 1367335 5,118.00$ 90 X 50 3 X 1 1/2 1317337 1342337 1367337 5,118.00$ 90 X 63 3 X 2 1317338 1342338 1367338 5,118.00$

110 x 20 4 x 1/2 1317399 1342399 1367399 4,029.60$ 110 X 25 4 X 3/4 1317404 1342404 1367404 4,029.60$ 110 X 32 4 X 1 1317401 1342401 1367401 4,029.60$ 110 X 40 4 X 1 1/4 1317412 1342412 1367412 5,907.60$ 110 X 50 4 X 1 1/2 1317415 1342415 1367415 5,907.60$ 110 X 63 4 X 2 1317420 1342420 1367420 6,655.60$



T343 DIAPHRAGM VALVE, ZERO DEADLEG, ACTUATED, PTFE DIAPHRAGM

A-S NC A-S NO A-A (ALL)mm inch PART # PART # PART # LIST

90 x 20 3 x 1/2 1316332 1344332 1369332 3,727.70$ 90 X 25 3 X 3/4 1316333 1344333 1369333 3,727.70$ 90 X 32 3 X 1 1316336 1344336 1369336 3,727.70$ 90 X 40 3 X 1 1/4 1316335 1344335 1369335 5,118.00$ 90 X 50 3 X 1 1/2 1316337 1344337 1369337 5,118.00$ 90 X 63 3 X 2 1316338 1344338 1369338 5,118.00$

110 x 20 4 x 1/2 1316399 1344399 1369399 4,029.60$ 110 X 25 4 X 3/4 1316404 1344404 1369404 4,029.60$ 110 X 32 4 X 1 1316401 1344401 1369401 4,029.60$ 110 X 40 4 X 1 1/4 1316412 1344412 1369412 5,907.60$ 110 X 50 4 X 1 1/2 1316415 1344415 1369415 5,907.60$ 110 X 63 4 X 2 1316420 1344420 1369420 6,655.60$



Purad UHP PVDF MISC. VALVEST M

SAMPLING BALL VALVE, FKM O-RINGS

INLET OUTLET PART # LIST1/4" MNPT 1/4" FNPT* 1068003 53.70$

*Also includes outlet nipple adapters for 1 /4" MNPT and hose barb


SIZE 150 PSI / PN 10ANGLE NEEDLE VALVE, FKM O-RING

INLET OUTLET PART # LIST16mm Butt 1/4" FNPT 5480002 228.80$ 20mm Butt 1/2" FNPT 5480005 284.90$ 1/4" MNPT 1/4" FNPT 5482002 228.80$ 1/2" MNPT 1/2" FNPT 5482005 284.90$


SIZE 150 PSI / PN 10

T21 BALL VALVE, T.U., FKM O-RINGS

mm inch PART # LIST20 1/2 1067005 160.00$ 25 3/4 1067007 203.00$ 32 1 1067010 281.00$ 40 1-1/4 1067012 325.00$ 50 1-1/2 1067015 463.00$ 63 2 1067020 615.00$

Supplied Cleaned and Bagged

Not for use with HPF fusion


BALL CHECK VALVES, T.U., FKM O-RINGS

mm inch PART # LIST20 1/2 1208005 229.00$ 25 3/4 1208007 285.00$ 32 1 1208010 341.00$ 40 1-1/4 1208012 600.00$ 50 1-1/2 1208015 600.00$ 63 2 1208020 747.00$

Supplied Cleaned and Bagged

Not for use with HPF fusion



V782 PRESSURE REGULATOR C Code

mm inch PART # LIST20 1/2 540243005 1,474.80$ 25 3/4 540243007 2,174.60$ 32 1 540243010 2,174.60$ 40 1-1/4 540243012 4,340.60$ 50 1-1/2 540243015 4,340.60$

Non-stock item, 50% restock charge.


Purad UHP PVDF REGULATORST M

V82 PRESSURE REGULATOR WITH GAUGE GUARD C Code

mm inch PART # LIST20 1/2 540241005 1,398.50$ 25 3/4 540241007 1,946.30$ 32 1 540241010 2,105.20$ 40 1-1/4 540241012 2,411.20$ 50 1-1/2 540241015 5,695.50$ 63 2 540241020 8,780.20$ 75 2-1/2 540241025 9,667.10$



V185 PRESSURE RELIEF T-VALVE C Code

mm inch PART # LIST20 1/2 540245005 1,258.40$ 25 3/4 540245007 1,683.20$ 32 1 540245010 1,992.70$ 40 1-1/4 540245012 3,049.00$ 50 1-1/2 540245015 3,384.30$ 63 2 540245020 3,910.70$



V186 BACK PRESSUREREGULATOR C Code

mm inch PART # LIST20 1/2 540244005 1,102.80$ 25 3/4 540244007 1,529.40$ 32 1 540244010 1,709.00$ 40 1-1/4 540244012 2,619.10$ 50 1-1/2 540244015 2,843.40$ 63 2 540244020 3,399.10$




Purad UHP PVDF FLOWMETERST M

M123 FLOWMETER C Code

mm inch PART # LIST20 1/2 540246001 375.60$ 20 1/2 540246002 375.60$ 20 1/2 540246003 375.60$ 32 1 540246004 436.60$ 32 1 540246005 436.60$ 32 1 540246006 436.60$ 32 1 540246007 436.60$


M23 FLOWMETER C Code

mm inch PART # LIST32 1 540247001 648.30$ 32 1 540247002 648.30$ 32 1 540247003 648.30$ 50 1-1/2 540247004 952.20$ 50 1-1/2 540247005 952.20$ 63 2 540247006 1,377.30$ 63 2 540247007 1,377.30$ 75 2-1/2 540247008 1,740.40$ 75 2-1/2 540247009 1,740.40$


0.22 - 2.20 gpm (50 - 500 l/h)0.44 - 4.40 gpm (100 -1000 l/h)

FLOWRATE0.03 - 0.35 gpm (8- 80 l/h)

0.07 - 0.66 gpm (15 - 150 l/h)0.09 - 0.88 gpm (20 - 200 l/h)0.07 - 0.66 gpm (15 - 150 l/h)0.13 - 1.32 gpm (30 - 300 l/h)



0.88 - 8.81 gpm (200 - 2000 l/h)1.32 - 13.21 gpm (300 - 3000 l/h)

FLOWRATE0.07 - 0.66 gpm (15 - 150 l/h)0.22 - 2.20 gpm (50 - 500 l/h)

0.44 - 4.40 gpm (100 -1000 l/h)

2.64 - 26.42 gpm (600 - 6000 l/h)5.28 - 52.83 gpm (1200 - 12000 l/h)8.81 - 88.06 gpm (2000 - 20000 l/h)

13.21 - 132.09 gpm (3000 - 30000 l/h)

Z700 GAUGE GUARD C Code

mm inch PART # LIST25 3/4 540248005 617.20$ 32 1 540248007 675.10$


SIZE 150 PSI / PN 10SDR 21


High PurityPiping SystemAccessories

AV Gaskets

Actuators

Backing Ring


PP BACKING RING, ANSI

mm inch PART # LIST20 1/2 5046005 18.50$ 25 3/4 5046007 21.00$ 32 1 5046010 27.00$ 40 1-1/4 5046012 32.50$ 50 1-1/2 5046015 34.70$ 63 2 5046020 41.20$ 75 2-1/2 5046025 54.10$ 90 3 5046030 54.10$

110 4 5046040 69.60$ 160 6 5046060 149.00$ 200 8 5046080 214.30$ 250 10 5046100 277.40$ 315 12 5046120 428.70$

PP-FRP coated over steel insert. For use with Stub Ends

9" (225mm) Stub Ends utilize the 8" (200mm) Backing Ring

ANSI 150#SIZE 230 PSI / PN 16

High Purity Accessories BACKING RINGS/CLIPS/ETC

PVDF BLIND FLANGE, NO INSERT, ANSI

mm inch PART # LIST20 1/2 5427005 238.70$ 25 3/4 5427007 253.00$ 32 1 5427010 268.60$ 40 1-1/4 5427012 348.30$ 50 1-1/2 5427015 376.90$ 63 2 5427020 419.60$ 75 2-1/2 5427025 471.80$ 90 3 5427030 573.80$

110 4 5427040 709.10$ 160 6 5427060 1,172.30$ 200 8 5427080 1,614.50$

Machined item non-returnable / non-cancelable

Not for pressure applications unless utilized with

pressure rated blind flange.

ANSI 150#SIZE NOT PRESSURE RATED

PP-FRP PIPE CLIPS

mm inch PART # LIST20 1/2 5246005 5.10$ 25 3/4 5246007 5.80$ 32 1 5246010 6.10$ 40 1-1/4 5246012 6.40$ 50 1-1/2 5246015 8.00$ 63 2 5246020 12.50$ 75 2-1/2 5246025 13.30$ 90 3 5246030 13.40$

110 4 5246040 15.40$ 160 6 5246060 30.10$ 200 8 5246080 47.30$ 225 9 5246090 50.60$

These clips evenly distribute clip stress around

pipe outer diameter avoiding pinpoint loads.

SIZE ALL SDR'S

PP BLIND FLANGE, STEEL INSERT, ANSI

mm inch PART # LIST20 1/2 5042005 81.20$ 25 3/4 5042007 82.30$ 32 1 5042010 84.50$ 40 1-1/4 5042012 90.50$ 50 1-1/2 5042015 102.60$ 63 2 5042020 111.70$ 75 2-1/2 5042025 125.00$ 90 3 5042030 144.50$

110 4 5042040 197.10$ 160 6 5042060 305.00$ 200 8 5042080 339.40$ 250 10 5042100 442.60$ 315 12 5042120 646.50$

PP-FRP coated over steel insert.

General Grade, available Cleaned and Bagged

ANSI 150#SIZE 230 PSI / PN 16

2” - 9”1/2” - 1-1/2”


SEAL CLEAN ePTFE GASKET

mm inch PART # LIST PART # LIST PART # LIST20 1/2 3175005 17.50$ 3171005 17.50$ 3173005 17.50$ 25 3/4 3175007 22.80$ 3171007 22.80$ 3173007 22.80$ 32 1 3175010 28.90$ 3171010 28.90$ 3173010 28.90$ 40 1-1/4 3175012 35.00$ 3171012 35.00$ 3173012 35.00$ 50 1-1/2 3175015 43.40$ 3171015 43.40$ 3173015 43.40$ 63 2 3175020 62.40$ 3171020 62.40$ 3173020 62.40$ 75 2-1/2 - - 3171025 83.00$ 3173025 83.00$ 90 3 3175030 95.80$ 3171030 95.80$ 3173030 95.80$

110 4 3175040 124.80$ 3171040 124.80$ 3173040 124.80$ 160 6 - - 3171060 206.20$ 3173060 206.20$ 200 8 - - 3171080 331.60$ 3173080 331.60$ 225 9 - - 3171090 331.60$ 3173090 331.60$ 250 10 - - 3171100 448.20$ 3173100 448.20$ 315 12 - - - - 3173120 490.70$

Seal Clean gaskets match pipe system ID, be sure to chose correct SDR.

Not a full face gasket, OD matches Stub End shoulder OD

SIZE 150 PSI / PN 10 230 PSI / PN 16 150 PSI / PN 10SDR 11 (PPN) SDR 21 (PVDF) SDR 33 (PVDF)

High Purity Accessories GASKETS

AV GASKET C CODE

mm inch PART # LIST PART # LIST PART # LIST20 1/2 3113005 3.00$ 3115005 7.00$ 3114005 11.00$ 25 3/4 3113007 3.00$ 3115007 8.00$ 3114007 12.00$ 32 1 3113010 3.00$ 3115010 9.00$ 3114010 12.00$ 40 1-1/4 3113012 3.00$ 3115012 11.00$ - -50 1-1/2 3113015 3.00$ 3115015 11.00$ 3114015 15.00$ 63 2 3113020 4.00$ 3115020 13.00$ 3114020 17.00$ 75 2-1/2 3113025 4.00$ 3115025 15.00$ - -90 3 3113030 4.00$ 3115030 19.00$ 3114030 26.00$

110 4 3113040 6.00$ 3115040 22.00$ 3114040 31.00$ 160 6 3113060 7.00$ 3115060 33.00$ 3114060 44.00$ 200 8 3113080 9.00$ 3115080 41.00$ 3114080 73.00$ 250 10 3113010 12.00$ 3115100 48.00$ 3114100 81.00$ 315 12 3113012 12.00$ 3115120 59.00$ - -

General Grade, available Cleaned and Bagged

SIZE EPDM PTFE PVDF


High Purity Accessories DIAPHRAGM VALVE ACCESSORIES

T342 / 343 REPLACEMENT DIAPHRAGMSDN

mm inch SIZE PART # LIST PART # LIST20 1/2 15 3174007 65.00$ 3172007 105.00$ 25 3/4 20 3174007 75.00$ 3172007 115.00$ 32 1 25 3174010 85.00$ 3172010 130.00$ 40 1-1/4 32 3174015 115.00$ 3172015 165.00$ 50 1-1/2 40 3174015 120.00$ 3172015 200.00$ 63 2 50 3174020 140.00$ 3172020 260.00$

DN Size is valve size which can be found on outer diaphragm tab.

T342 / T343 REPLACEMENT ACTUATORSDN A-S NO A-A

mm inch SIZE PART # LIST PART # PART #20 1/2 15 6363007 456.80$ 6364007 636200725 3/4 20 6363007 456.80$ 6364007 636200732 1 25 6363010 504.00$ 6364010 636201040 1-1/4 32 6363015 1,118.30$ 6364015 636201550 1-1/2 40 6363015 1,118.30$ 6364015 636201563 2 50 6363020 1,118.30$ 6364020 6362020

A-S NO and A-A are made to order, non-returnable / non-cancelable

ACTUATION ACCESSORIES

DNmm inch SIZE PART # LIST PART # LIST20 1/2 15 6387007 433.10$ 6388007 471.30$ 25 3/4 20 6387007 433.10$ 6388007 471.30$ 32 1 25 6387010 433.10$ 6388010 471.30$ 40 1-1/4 32 6387015 929.30$ 6388015 487.90$ 50 1-1/2 40 6387015 929.30$ 6388015 487.90$ 63 2 50 6387020 929.30$ 6388020 487.90$

Valves ordered with these accessories are non-returnable / non-cancelable.

MIN / MAX 24V ELEC-MECHSIZE STROKE LIMITOR POSITION FEEDBACK

SIZE A-S NC



Asahi/America leads the industry in custom fabrications and produces high quality products. Our leanmanufacturing facility provides the fastest delivery in the industry. We stock large quantities of raw materialstock made from the same Ultra High Purity Solef® resin that is utilized in our Purad UHP Piping system.Whether assisting a fast paced project with spool pre-fab or making a special machined component,Asahi/America is here to support you.

MACHINED COMPONENTS VESSELS AND TANKS

VALVE ASSEMBLIES GOOSENECK FAUCETS

SPOOL PRE-FAB PIPING SKIDS

VALVE BOXES

High Purity Piping Systems FABRICATION

Custom Fabrication


IR FusionWelding Equipment

SP110S


High Purity Welding Equpment PURCHASE

*For Net Price Please Contact Your Asahi/America District Sales Manager

SP-110S IR FUSION EQUIPMENTThe Next Generation of IR Technology

Equipment Features

The SP110s controls all equipment movements and parameters during each phase of the welding process (heating, change over, joining and cooling). This full automation eliminates operator influence during the fusion process and provides unmatched repeatability.

The completely Automated Fusion Process provides unmatched welding reliability, ease of use and short weld times. The Large Size Range of the tool ( 1/2" - 4") allows the users to work without the need for multiple tool sizes on a project.An Automated Planing Depth feature enhances fabrication capabilities.The Magnetic Clamp Inserts make pipe size change over quick.The Validation Program provides several QA sources including multiple label printout, copy label printout, stored electronic data and a PC download program.The SP tool series is capable of welding PVDF, PP, PPn, ECTFE (Halar) and PFA* Power Requirements: 110 VAC 15 Amp circuit for included Transformer

SP-110S IR FUSION EQUIPMENTDESCRIPTION PART # LIST PRICE*Complete Equipment Includes:Clamps Inserts, Tools, Storage Crate, Operator and Master Cards, Printer, DataWorks Software, 110V Transformer

5861001 59,000.00$

SP-110S IR FUSION EQUIPMENT WITH PFADESCRIPTION PART # LIST PRICE*Complete Equipment Includes:Standard Equipment with PFA parameters and PFA Clamps Inserts 1/2"-2"

5861002 74,000.00$

PFA Expansion Pack for Previously Purchased Tool 5861003 17,500.00$

SP-315S COMING SOON!The larger version of the cutting edge SP-110S technology

SP SERIES EQUIPMENT ACESSORIES C CodeDESCRIPTION PART # LIST PRICEPlaner Blade Set SP110 & SP110S 5874110 325.00$ Planer Blade Set SP250 5874250 475.00$ Printer Labels - 1,500 per roll 5866000 149.00$ Printer Ribbon 5867000 99.00$ SP-110S Operator Level 4 Card 5864104 125.00$ SP-110S Master Level 3 Card 5864103 125.00$ SP-110 Operator Level 4 PCMCIA Card 5864304 225.00$ SP-110 Master Level 3 PCMCIA Card 5864303 225.00$ SP-250 Operator Level 4 PCMCIA Card 5864404 225.00$ SP-250 Master Level 3 PCMCIA Card 5864403 225.00$

TM


High Purity Welding Equpment RENTAL

All rental equipment requires rental agreement to be completed.HPF Couplings, HPF Balloons, Socket Heater Bushings and Scraper Tool are not included in rental rates and must be purchased seperately.

HPF PVDF ELECTROFUSION COUPLINGS A Code

mm inch PART # LIST20 1/2 5479005 26.90$ 25 3/4 5479007 27.80$ 32 1 5479010 30.80$ 40 1-1/4 5479012 33.50$ 50 1-1/2 5479015 35.90$ 63 2 5479020 46.20$

SIZE

HPF PVDF ELECTROFUSION BALLOONS C Code

mm inch PART # LIST20 1/2 5788005 150.00$ 25 3/4 5788007 150.00$ 32 1 5788010 150.00$ 40 1-1/4 5788012 175.00$ 50 1-1/2 5788015 175.00$ 63 2 5788020 200.00$

SIZE

SOCKET FUSION HEATER BUSHINGS C Code

mm inch PART # LIST20 1/2 5797005 82.80$ 25 3/4 5797007 90.00$ 32 1 5797010 140.40$ 40 1-1/4 5797012 162.00$ 50 1-1/2 5797015 172.80$ 63 2 5797020 205.20$ 90 3 5797030 295.20$

110 4 5797040 367.20$

SIZE

UNIVERSAL PIPE BEVELLER C Code

mm inch PART # LIST20 - 110 1/2 - 4 5686003 250.00$

SIZE

EQUIPMENT RENTAL RATES C CodeTOOL WELDING METHOD SIZE RANGE PART # MONTHLY WEEKLYSP-110 IR Non-Contact 1/2"(20mm) - 4"(110mm) 9861000 3,000.00$ 750.00$ SP-110S IR Non-Contact 1/2"(20mm) - 4"(110mm) 9861001 3,600.00$ 1,000.00$ SP-110S w/ PFA IR Non-Contact 1/2"(20mm) - 4"(110mm) 9861002 4,000.00$ 1,200.00$ SP-250 IR Non-Contact 2-1/2"(75mm) - 10"(250mm) 9869000 3,600.00$ 1,000.00$ HPF Electrofusion / Beadless 1/2"(20mm) - 2"(63mm) 9786000 3,000.00$ 750.00$ Hand Socket Socket 1/2"(20mm) - 2"(63mm) 9867001 330.00$ 105.00$ Bench Socket - W3500 Socket 1/2"(20mm) - 4"(110mm) 9711000 1,320.00$ 390.00$ Shop 4 Miniplast Butt 1/2"(20mm) - 4"(110mm) 9730000 1,050.00$ 275.00$ Shop 6 Maxiplast Butt 1-1/2"(50mm) - 6"(160mm) 9622000 1,420.00$ 430.00$ Shop 12- W2500 Butt 1-1/2"(50mm) - 12"(315mm) 9722000 1,650.00$ 485.00$


Freight PolicyReturn Policy

Warranty


STANDARD FREIGHT POLICYValves, Pipe, Fittings, & Equipment

Freight will be allowed on the following orders:1. $ 1,500.00 Net or greater for valves.*2. $ 5,000.00 Net or greater for single wall pipe and fittings.3. $ 10,000.00 Net or greater for double wall products excluding HDPE and prefabricatedspool pieces.* Combined orders of valves and pipe must meet requirements of pipe orders to qualify forfreight allowed.

Freight will be allowed on the following orders for Alaska, Hawaii, and Puerto Rico:1. $ 3,000.00 Net or greater for valves.2. $ 25,000.00 Net or greater for pipe and fittings.

The following shipments are NOT freight allowed:1. International orders2. All HDPE products excluding Air-Pro3. Rental machines4. Prefabricated pipe spools5. EM Technik products6. Dymatrix Specialty Valves

NOTES:- All truck shipments are via common carrier and are to be selected by Asahi\America, Inc.- Selection of alternate carriers is negotiable between Distributors and Asahi\America, Inc.- Freight charges for expedited portions of freight allowed shipments are the responsibilityof the distributor.- Freight charges on freight allowed backorders will be paid by Asahi\America, Inc.- Freight for add-ons and releases will not be allowed.- Returns of rental equipment must be prepaid.- Freight will not be allowed on oversized loads, spools, double lengths of pipe, etc.- International orders must include contact name, telephone or Fax number, andInternational freight account number.

Terms and Conditions

Shipments: Asahi/America will not be liable for any delay in performance of orders or contracts, or in deliveryof shipment of goods, or for any damage suffered by buyer by reason of such delay performance, when suchdelay is directly or indirectly caused by acts of God, war, labor difficulties, shortage of materials, or suppliesbeyond its control. Asahi/America reserves the right to discontinue products and make changes in productsoffered at any time.

Claims: All claims must be made in writing and received by Asahi/America within 10 days after receipt ofmerchandise.If a shipment is received in damaged condition, a claim must be filed with the delivering carrier andnoted on the freight bill before you accept the merchandise.

Returns and Cancellations: Refer to our policy custserv.309 Revision C.

Terms: 2% 15 days. Net 30 days. An interest charge of 1 1/2% percent per month (an annual rate of 18%) willbe charged in states where legal on the unpaid balance owed together with cost of collection including reasonableattorney’s costs.

Minimum Billing Charge: Asahi/America will charge a $75.00 net minimum order requirement on all orders.Any tax or duty imposed by any government will be added to the sales price.

High Purity Piping System FREIGHT POLICY


High Purity Piping System RETURN POLICY

Return Merchandise PolicyEFFECTIVE 02/01/00

Asahi/America, Inc., (A/A) will authorize the return of product providing guidelines are adhered to as follows.

Canceled OrdersA/A. will accept the cancellation of Purchase Orders (PO) with no restocking charges under the followingconditions:

A/A has not started production of manufactured products.A/A has not placed a purchase order to our vendors for non-stock product or custom product.A/A has not already, picked, packaged and or shipped the product.

Cancellation of orders that do not meet the above conditions may be approved under special consideration and willbe subject to a minimum 30% restocking charge, or cancellation charge.

Authorized ReturnsA/A. will authorize the return of product with a minimum 30% restocking charge under the following conditions.

Product must have been purchased within the last six months.

Product must be considered stock item by A/A.

Product must be in resellable condition.

Product EvaluationsA/A. will authorize the return of product for evaluation upon completion of the RMA form. (Please contactCustomer Service Department for RMA form)

A/A, upon completion of the evaluation, will repair, replace, or issue a credit for the defective productif it is determined that the cause of failure is the responsibility of A/A. A/A retains the sole right todetermine the correct course of action.

A/A will notify the customer if it is determined that the cause of failure is due to normal wear and tearafter the expiration of the warranty, misapplication, or improper use. In the event that the failure is notthe responsibility of A/A the customer is to determine the corrective action that will be taken. A/A willnot proceed with a repair or replacement until a purchase order is supplied by the customer. Thepurchase order must cover all expenses incurred by A/A.

Freight·Customer is responsible for all freight costs associated with a return that is not directly attributed to an A/A erroror product failure covered under warranty. All returns must be sent prepaid; any collect shipments will be refusedand returned to the Customer.

A/A will be responsible for all standard freight costs for product evaluations where it is determined that the cause of failure is the responsibility of A/A.


High Purity Piping System RETURN POLICY

Procedures

Asahi/America (A/A) will process all RMAs within four (4) weeks of receipt of the product providing the followingprocedures were followed. Please note; A/A is not responsible for any product that is shipped to ourfacilities without a completed RMA form. A/A will not process returns that are not accompanied by anauthorized RMA number and product may be returned to the Customer at the customer’s expense.

All correspondences must be made directly to our RMA department.Telephone Numbers: 1-800-343-3618 ext. 45441-781-388-4544Fax Number 1-781-388-4777E-mail [email protected]

RMA form must be filled out with all relevant information and forwarded to A/A’s RMA department.The form must include the following minimum information: - Original PO #, Original Invoice #, Original Order #. - Supply itemized list of proposed return with A/A part numbers. - Specify reason for return.

Upon successful completion of the RMA form and preliminary review, A/A will assign an RMA number & forward to thecustomer. A/A may elect to inspect product on site prior to issuing an RMA number.

Customer must properly package the product, the RMA number must be visible on all packages and indicated on the packinglist, and arrange shipment of the product to A/A.

Customer must insure that product is returned in resellable condition in original packaging excluding product that is returnedfor repair or evaluation.

Customer must insure that all product has been decontaminated and does not present a health or safetyproblem to anyone that handles it.

A/A will notify customer of any discrepancies with regards to quantity and/or quality of the returned product.

A/A will process credit upon completion of a successful inspection of the returned product.

Product returned for evaluation will follow the above guidelines with the following exception.

A resolution to the evaluation must be agreed upon prior to the repair/replacement/credit of the product. The customerwill have a two-week period to act upon A/A’s resolution to the evaluation. A/A will return the product to the customerat the customer’s expense, if no response is forwarded within this time frame. The customer, prior to the completion ofthe repair must place a purchase order if it is determined that the failure is proven not to be the responsibility of A/A.

A/A will provide a full report of product returned for evaluation upon written request.

Lost/Damaged Shipments

Damaged shipments and shortages must by signed and acknowledged by the carrier’s driver. All claimsfor lost or damaged shipments must be made directly by the customer to the delivering carrier at time ofdelivery.

A/A’s Customer Service Department must be notified in writing within 10 days of receipt of orders thatappear to be short shipped by our shipping department. A/A will validate this claim through weightcalculations and other means available. Customer’s requests for proof of delivery by A/A must be madewithin 30 days of receipt of invoice. After 30 days, the product will be considered as delivered.


WARRANTY

Warranty; Limitation on Liability. Asahi/America, Inc., (“Seller”) warrants, to the original Buyer only, that all productsdelivered hereunder shall be free from defects in design and manufacture for a period of one year from the date of delivery,provided that such products are installed, used, operated, adjusted and serviced only in a proper and appropriate mannerand in strict accordance with any instructions relating thereto furnished to Buyer by Seller. In no event shall theforegoing warranty extend to any products in any way caused or allowed to be, or installed , operated or used in such amanner as to be, subject or exposed to conditions of misuse, abuse or accident.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSOR IMPLIED. NO WARRANTY OF MERCHANTABILITY, NO IMPLIED WARRANTY OF FITNESS FOR ANYPARTICULAR PURPOSE, AND NO IMPLIED WARRANTY ARISING BY USAGE OF TRADE, COURSE OF DEALINGOR COURSE OF PERFORMANCE IS GIVEN BY SELLER OR SHALL ARISE BY OR IN CONNECTION WITH THISSALE AND/OR THE SELLER’S AND/OR BUYER’S CONDUCT IN RELATION THERETO OR TO EACH OTHER, ANDIN NO EVENT SHALL SELLER BE LIABLE ON ANY SUCH WARRANTY WITH RESPECT TO ANY PRODUCT.

Liability of the Seller under or in connection with this sale and/or the foregoing warranty shall be limited, at the soleoption of the Seller, to one repair of, replacement of, or a refund of the purchase price of any products or part thereof (a),with respect to which Seller receives, promptly after Buyer’s discovery of any alleged defect and prior to the expiration ofthe one-year warranty period as provided above, notice from Buyer or Buyer’s claim defect and (b) which shall bereturned to Seller by Buyer, as provided herein, promptly after Buyer’s discovery of such alleged defect and which shallbe determined by the Seller to have proven defective within the one-year warranty period provided above; failure byBuyer to notify Seller and return such products to Seller after Buyer’s discovery of such alleged defect shall constitute awaiver by Buyer of any and all claims of any kind with respect thereto. Any products returned by Buyer to Seller underthe foregoing terms shall be returned to Seller’s place of business freight prepaid, accompanied or preceded by Buyer’sparticularized statement of the claimed defect. The risk of loss and freight charges to and from Seller in connection withany returned products shall be borne by Buyer; but Seller shall bear such additional freight charges arising in connectionwith any such returned products ultimately determined by Seller to be defective under the terms of the foregoingwarranty, the cost of repair or replacement (if any) of such products, and the risk of loss or damage which such productsare in Seller’s possession at its place of business. The foregoing remedy shall constitute the sole and exclusive remedy ofthe Buyer under or in connection with this sale and/or warranty of the Seller. Except as specifically provided herein, Sellershall not be responsible or liable for any costs, expenses or damages of Buyer in connection with any removal, repair orreplacement (including any attempts or actions relating thereto) of any allegedly defective products, and no charge ofsetoff of any kind of Buyer relating thereto shall be made against the Seller without prior and specific written approval ofSeller.

IN NO EVENT SHALL SELLER BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL ORCONSEQUENTIAL DAMAGES ARISING IN ANY WAY IN CONNECTION WITH ANY PRODUCTS OR THIS SALE.

The agreement of Seller to sell its products is expressly conditioned upon the Buyer’s assent to, and Seller agrees to sellits products only upon, all terms and conditions set forth above and on the face hereof. Buyer’s acceptance of anyproducts provided under this sale shall constitute such assent.

35 GREEN STREET, MALDEN, MA 02148-0005TOLL FREE: (800) 343-3618 · PHONE: (781) 321-5409 · FAX: (781) 321-4421

DIRECT SALES TOLL FREE: EAST (800) 232-7244 / CENTRAL (800) 442-7244 / WEST (800) 282-7244INTERNET: http://www.asahi-america.com · Email: [email protected]

ASAHI/AMERICA, INC.

Asahi America can also serve your wet process needs through our Dymatrix line of specialty valves and our diverse EM-Technikline of high quality fittings and valves.

The Wet Process People

The Dymatrix™ specialty valve product line is engineered to offer unique solutions to the advanced wet process requirementsof the semiconductor industry. These valves are ideally suited for CMP Slurry, DI Water and Chemical Process applications.

Pinch Valves (PV3, PVM, PVEL)Our Pinch Valve’s design provides superior durability andeliminates particle generation in CMP slurry applications.

Diaphragm Valves (SDV, HDV)We engineered the Diaphragm Valves for high cycle life and a compact design.

Needle Valves (NVM)Our Needle Valve utilizes a dual stem for true linear flow control and integrated diaphragmfor superior purity.

Pressure Regulators (HPRL, HPRS)We designed Pressure Regulators to provide precisely accurate and highly stable controlof pressure fluctuations for flow control applications.

Multiport Valves (MPV)These fully flushable valves can be configured into combo valves and manifolds.Interested in designing a manifold? Contact our engineering department.

EM-Technik, one of the leading manufacturers in the international plastic industry, produces highquality fittings and valves made of plastics such as PP, PVDF and PFA.

Series 1A/1C Compression Fittings

Easy and reliable connections for flexible tubing

Series 1D Flare FittingsAvailable in a variety of materials

Series 5 Control ValvesEverything you need from check valves to needle valves

Series 6 Ball ValvesAvailable in a variety of configurations from 2-way to 5-way

TM

effective: 11/12/07 subject to change without notice high purity piping...

Documents