eee dept project report format (1)
TRANSCRIPT
-
8/2/2019 EEE Dept Project Report Format (1)
1/5
1
WATER LEVEL CONTROLLER
CUM-MOTOR PROTECTOR
A PROJECT REPORT
Submitted in partial fulfillment of the requirements for the Award of the degree of
BACHELOR OF TECHNOLOGY
IN
ELECTRONICS AND COMMUNICATION ENGINEERING (2009-2012)
By
BABLOO (L09EC47)
SHOWRAV KUMAR (08EC41)
ARVIN KUMAR (L09EC46)
ELECTRONICS & COMMUNICATION ENGG. DEPTT.
RPSGOI BALANA MOHINDERGARH-123029
-
8/2/2019 EEE Dept Project Report Format (1)
2/5
2
Acknowledgement
The satisfaction and euphoria that accompany the successful completion of any taskwouldnt complete without the mention of the people who made it possible because
success is epitome of hard work, undeterred missionary zeal, steady fast
concentration and dedication and above all apt advices.
We are highly obliged to our guide Mr. Devender Yadav (Asst. Prof.; ECE Dept.)
for his valuable guidance and suggestions helpful for the completion of the project.
We are also thankful to Prof. Karambir Sheoran (HOD; ECE Dept.) for
assigning us such a valuable project and providing us all required facilities.
We would like to thanks Mr. Krishan Kumar(Lab Instructor. In EEE Dept.),
Sanjay Kumar (Lab Instructor in ME Dept.), for their valuable time, guidance,
continuous support and regular motivation during the tenure of the project. We wish
for their continuous support in the future.
We would like to extend our heart full thanks to all of our exhilarating and
exuberant friends who efficiently assisted us to tackle our pursuit and were indeed a
moral boost to us.
.
We offer our sincere thanks to our parents for their picture perfect encouragement,motivation & indefatigable assistance, which helped us to bring this dissertation to a
fruitful fruition.
Finally we are grateful to the Almighty who has constantly been with us and has
brought our project work to a successful completion.
BABLOO (L09EC47)
SHOWRAV KUMAR (08EC41)
ARVIN KUMAR (L09EC46)
-
8/2/2019 EEE Dept Project Report Format (1)
3/5
3
CERTIFICATE
This is to certify that BABLOO (L09EC47) ,SHOWRAV KUMAR (08EC41),
ARVIN KUMAR (L09EC46),pursuing the Bachelor degree in Electronics and
Communication Engineering from RPS College of Engineering and Technology,
has successfully completed his major project entitled as WATER LEVEL
CONTROLLER CUM-MOTOR PROTECTOR for the academic session 2009-
2012 under the supervision ofMr. DEVENDER YADAV (Asst.Prof.in EEC
Dept.) required for the partial fulfillment of award of Bachelor degree of
Engineering from M.D.University ,Rohtak
(Project Guide) (HOD ECE Deptt.)
Mr.DEVENDER YADAV Mr.KARAMBIR SHEORAN
Asst.Prof. ECE Deptt. Associate Prof. ECE Deptt.
External Examiner
ELECTRONICS & COMMUNICATION ENGG. DEPTT.
RPSGOI BALANA MOHINDERGARH-123029
-
8/2/2019 EEE Dept Project Report Format (1)
4/5
4
ABSTRACT
Nowadays, the application of PLC is widely known and use in this digital world. PLCs
application is obviously applied at the industrial sector. Normally, the PLCs that have been used at
the industrial field is usually to control a mechanical movement either of the machine or heavy
machine in order to create an efficient production and accurate signal processing. In this project, a
discussion about PLC application will be explained in more details and specified. Whereby, a
machine that used to prepare automatic filling water into the tanks is fully controlled by the PLC
,GE Fanuc which acts as the heart of the system. The system sequence of operation is designed by
ladder diagram and the programming of this project by using GE Fanuc Proficy Machine
Programmer software. The input signal that has been sent from the limit switches to the PLC has
being made as a reference. Signal in order to determine the output signal that exactly a same with
the PLC programming language based on the user requirement. Beside that, the electronics and
electric devices that usually been controlled by the PLC are like a motor, solenoid valves
,relay,limiting switches and the others devices.
-
8/2/2019 EEE Dept Project Report Format (1)
5/5
5
ContentsChapters Page no.
I. Acknowledgement 01
II. Certificate 02
III. Abstract 03
Chapter-1. Introduction 05
1.1General introduction 06
1.2 Literature survey 08
1.3 About the project work 10
Chapter-2. Background summary 12
2.1 Introduction to PLC. 13
2.2 Introduction to motors. 16
2.3 Introduction to relays. 17
2.4 Introduction to solenoid valves 18
Chapter 3. Methodology of design 19
3.1 Software approach. 20GE Fanuc Proficy Machine Edition PLC software
3.2 -Hardware approach. 32
Chapter-4. Testing and performance 39
4.1 Automatic water tank filling system using PLC 41
Chapter-6. Conclusion and future scope 42
References 43