editorial advanced nanomaterials and nanostructures for tribological...
TRANSCRIPT
EditorialAdvanced Nanomaterials and Nanostructures for TribologicalApplications
Yongsheng Zhang,1 Tianchang Hu,1 Xianjin Ning,2 and Qi Ding1
1 State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences,Lanzhou 730000, China
2 School of Materials Science & Engineering, Beijing Institute of Technology, Beijing 100081, China
Correspondence should be addressed to Yongsheng Zhang; [email protected]
Received 25 March 2014; Accepted 25 March 2014; Published 9 April 2014
Copyright © 2014 Yongsheng Zhang et al. This is an open access article distributed under the Creative Commons AttributionLicense, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properlycited.
Lubricating problems are common in many engineeringapplications, such as aerospace, ground mechanical equip-ment, and large aircraft carriers. Moreover, the high-performance lubricating materials are the key to ensure highrunning precision and stability for mechanical systems. Withthe rapid development of modern technology, various lubri-cating materials have been developed for different machiner-ies. These developments are geared toward improving theproperty of materials and allowing them to surmount severechallenges under extreme conditions (e.g., high/low temper-ature, special media, and unfavorable atmosphere) in thefields of aviation, space, nuclear energy, andmicroelectronics.The lubricating materials corresponding to the requiredconditions in these fields must be capable of working incorrosive environments and high/low temperatures for a longtime. However, because the conventional lubricating mate-rials cannot satisfy these application requirements, lubri-cating materials are currently facing a series of challenges[1, 2].
In recent years, much effort has been directed towardpreparing high-performance materials and coatings fortribological applications, such as laminated-graded self-lubricating composites [3, 4], composite-lubricating coatings[5], and DLC films with surface texturing [6]. In addition,nanomaterials and nanostructures, because of their specialdimensional effects, reveal totally different tribological andmechanical properties compared with traditional materials
[7, 8]. The combination of nanomaterials and lubricatingcomposites is a promising way to achieve the optimizationof lubricating materials [9]. Meanwhile, the emergences ofnew preparation technologies [10] and theoretical approaches[11] have hastened the development of an increasingly largenumber of new lubricatingmaterials and thus speeded up theindustrialization process of these materials.
In this special issue, five papers are devoted to themechanical and tribological performances of nanomaterialsand films. The carbon nanolayer, remained on the surfaceof Ti6Al4V alloy after ion implantation, was proved tohave an influence on friction reduction due to the self-lubrication property of the carbon nanolayer. Dual-coatedTiO2nanoparticles as water based lubricant additive and
cutting fluids additive provided excellent tribological prop-erties, which might be ascribed to the forming of a dynamicdeposition film during rubbing process according to surfaceanalysis. For DLC films, nanotribological properties suchas H (Nanoindentation hardness) and nanowear resistancewere highly correlated with ID/IG ratio and highly dependenton the films’ nanostructures. Hard and soft multilayeredSiCN nanocoatings with high hardness and toughness wereprepared by magnetron sputtering. Increased deformationaccommodation was achieved for such alternate hard andsoft layers as the thin hard layers slide relative to eachother due to shear deformation of low modulus layers. Thisspecial issue also contains a very interesting hypothesis about
Hindawi Publishing CorporationJournal of NanomaterialsVolume 2014, Article ID 402198, 2 pageshttp://dx.doi.org/10.1155/2014/402198
2 Journal of Nanomaterials
developing an elastic property analysis model suitable forthree commonly used fabric liners through a theoreticalanalysis of the elastic properties.
We hope that readers will find in this special issue notonly accurate data and updated reviews on the tribologicalbehavior of advanced materials, but also important guidancefor the optimization of the advanced lubricating materials.
Yongsheng ZhangTianchang HuXianjin Ning
Qi Ding
References
[1] Y. S. Zhang, Y. Fang, H. Z. Fan, J. J. Song, T. C. Hu, and L.T. Hu, High-Performance Ceramic Lubricating Materials, vol. 17of Advances in Materials Science Research, Nova Science, NewYork, NY, USA, 2014.
[2] Y. E. Qi, Y. S. Zhang, and L. T. Hu, “High-temperatureself-lubricated properties of Al
2O3/Mo laminated composites,”
Wear, vol. 280-281, pp. 1–4, 2012.[3] Y. Fang, Y. S. Zhang, J. J. Song, H. Z. Fan, and L. T. Hu, “Design
and fabrication of laminated-graded zirconia self-lubricatingcomposites,”Materials & Design, vol. 49, pp. 421–425, 2013.
[4] Y. E. Qi, Y. S. Zhang, Y. Fang, and L. T. Hu, “Design and prepa-ration of high-performance alumina functional graded self-lubricated ceramic composites,”Composites Part B: Engineering,vol. 47, pp. 145–149, 2013.
[5] T. C. Hu, Y. S. Zhang, and L. T. Hu, “Tribological investigationofMoS
2coatings deposited on the laser textured surface,”Wear,
vol. 278-279, pp. 77–82, 2012.[6] Q. Ding, L. P. Wang, Y. F. Wang, S. C. Wang, L. T. Hu, and Q. J.
Xue, “Improved tribological behavior of DLC films under waterlubrication by surface texturing,” Tribology Letters, vol. 41, pp.439–449, 2011.
[7] Y. S. Zhang, J. M. Chen, and L. T. Hu, “Progress on tribologicalinvestigation of ceramic-based nanocomposites,” Tribology, vol.26, pp. 284–288, 2006.
[8] T. C. Hu, Y. S. Zhang, and L. T. Hu, “Mechanical and wear char-acteristic of Y-TZP/Al
2O3nanocomposites,” Industrial Lubrica-
tion and Tribology, vol. 66, pp. 209–214, 2014.[9] Y. S. Zhang, L. T. Hu, J. M. Chen, and W. M. Liu, “Lubrication
behavior of Y-TZP/Al2O3/Mo nanocomposites at high temper-
ature,”Wear, vol. 268, pp. 1091–1094, 2010.[10] X. J. Ning, J. H. Kim, H. J. Kim, and C. Lee, “Characteristics
and heat treatment of cold-sprayedAl-Sn binary alloy coatings,”Applied Surface Science, vol. 255, pp. 3933–3939, 2009.
[11] Q. Wang and Y. W. Chung, Encyclopedia of Tribology, Springer,New York, NY, USA, 2013.
Submit your manuscripts athttp://www.hindawi.com
ScientificaHindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
CorrosionInternational Journal of
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
Polymer ScienceInternational Journal of
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
CeramicsJournal of
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
CompositesJournal of
NanoparticlesJournal of
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
International Journal of
Biomaterials
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
NanoscienceJournal of
TextilesHindawi Publishing Corporation http://www.hindawi.com Volume 2014
Journal of
NanotechnologyHindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
Journal of
CrystallographyJournal of
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
The Scientific World JournalHindawi Publishing Corporation http://www.hindawi.com Volume 2014
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
CoatingsJournal of
Advances in
Materials Science and EngineeringHindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
Smart Materials Research
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
MetallurgyJournal of
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
BioMed Research International
MaterialsJournal of
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
Nano
materials
Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014
Journal ofNanomaterials