eden project - camera di commercio...
TRANSCRIPT
EDEN EcoDesign Network Focus on one of the case studies: TCG Italia company
Focus su uno dei casi studio: l’azienda TCG Italia
EDEN PROJECT IL PROGETTO EDEN
POLITECNICO DI TORINO DAD – Department of Architecture and Design T.C.G. Italia_company profile
TCG Italia S.r.l.: company profile
TCG Italia S.r.l via Santa Cristina 16/c
10036 - Settimo Torinese (TO)
Coating and decoration systems on different surfaces and materials (plastic, glass, wood, metal sheet, rubber etc) and cut and ennoble process on expanded polystyrene.
POLITECNICO DI TORINO DAD – Department of Architecture and Design TCG Italia_materials and finishing
Materials and finishing
CORE POSSIBLE FINISHINGS
EPS - low density (10 to 40 Kg/m3) - mechanical features can be improved with surface coatings - plastically deformable - heat insulating - non-toxic - waterproof
possible finishing
SOFT RESIN - smooth texture - kinetic energy absorbing - elastically deformable - drilling-resistant - fire-resistant - possible finishing compatible with a soft resin
STIFF RESIN - rough texture - stiff and tough surface, protective function - waterproofing - shockproof - freeze thaw resistant
PLASTER LIKE - rough surface - compatible with acrylic and water painting - applicable by trowel - fireproof - heat insulating - mold resistant - choice between several granulometry
STONE VENEER - light (stone veneer weights 1,5 Kg/m2) - possible replacement to quarry stone - flexible - weather resistant - surface quality is the same of natural stone
POLITECNICO DI TORINO DAD – Department of Architecture and Design TCG Italia_technologies and know-how
Technologies and know-how
3D HOT WIRE CUTTING SYSTEM
SINERGIA ONE manufacturing of customized 3D objects in extruded or foam polystyrene (EPS), obtained by an advanced hot-wire cutting process. Objects can be finished with several finishing, from plaster-like coating to stiff or soft resins.
OUTDOOR: facade adornments (frames, between floors, arch frames, covering pillar, pilasters…) building thermal coating formwork and moulds 3D surfaces
INDOOR: indoor adornments (frames, arch frames…) dividing walls 3D surfaces false ceilings
POLITECNICO DI TORINO DAD – Department of Architecture and Design TCG Italia_Sinergia building works
Sinergia building works
OUTDOOR INDOOR
OUTDOOR: street furniture 3D signs promotional furniture
INDOOR: shopping center fittings exhibit scenography furnishing wellness centres lamps and light sources
POLITECNICO DI TORINO DAD – Department of Architecture and Design TCG Italia_Sinergia design works
Sinergia design works
OUTDOOR INDOOR
1. Identify new application fields and new sales channels that allow a standardization of TCG products: - transport field: aeronautics, nautical, railway;
- urban furniture: fountains, vases, outdoor; - cemetery furniture: chapels, graves, provisional tombstones;
POLITECNICO DI TORINO DAD – Department of Architecture and Design T.C.G. Italia_goals of the support
Goals of EDEN support
2. Improve the spread of TCG Italia current expertise through a better company communication: - create a new catalogue - rationalize the production and the related marketing strategies in few main productive areas;
3. Strengthen the quality of Sinergia Building works with some process guidelines.
POLITECNICO DI TORINO DAD – Department of Architecture and Design T.C.G. Italia_new application fields
1. New application fields In which application field
hot-wire cut EPS could improve the environmental
behaviour of products? AERONAUTICS NAUTICAL RAILWAY
Searching innovative and sustainable applications of the Sinergia One EPS hot-wired cut objects by focusing on lightness, stiffness, plasticity and fire-resistance properties of the material.
Compulsory tests in aeroautics: - Vertical test (V12) - Smoke Density & Toxicity test (SD&T) Compulsory tests in nautical field: - Vertical test (V12) - Smoke Density & Toxicity test (SD&T)
POLITECNICO DI TORINO DAD – Department of Architecture and Design T.C.G. Italia_current regulations
Current regulations AERONAUTICS
- CS/FAR 25.853, Appendix F Part I (Vertical 12/60) and Part V (Smoke Density test);
- AIRBUS INDUSTRIES ABD003; - BOEING COMPANY BSS7238/39 (Smoke Density and Toxicity)
in accordance with the prescriptions of AIRCRAFT MATERIAL FIRE TEST HANDBOOK n. DOT/FAA/AR-00/12;
- Life Cycle Tests in order to comply with the following industry standards: SAE AS8049B.
NAUTICAL
- MCA – Maritime and CoastGuard Agency - LY3 - The Large Commercial Yacht Code;
- IMO – International Maritime Organization; - International Convention for the Safety of Life at Sea (SOLAS); - International Code for the Application of Fire Test Procedures
(2010 FTP Code).
CRASH
LANDING
multi-matter system:
Polycarbonate (PC) carter filled with an expanded polymer,lined with eco-leather
single-matter component:
EPS sideboard strengthenwith stiff resin
OLD SET-UP NEW SET-UP
POLITECNICO DI TORINO DAD – Department of Architecture and Design T.C.G. Italia_metaproject proposals
New application in aeronautics_metaproject proposals
HEADREST CRUMPLE ZONE BUSINESS CLASS SEAT SIDEBOARD
Soft resin makes EPS absorbing kinetic energy. This feature is appropriate for headrest crumple zone. > carried out V12 test: NOT PASSED > this application cannot be finalized.
Stiff resin makes EPS rigid and tough. > carried out V12 test: PASSED > this application can be finalized for ATR programme. > SD&T test: IN PROGRESS > if it will pass it, this application could be finalized also on BOEING and AIRBUS programme.
improvement of component performance decrease of the number of components
POLITECNICO DI TORINO DAD – Department of Architecture and Design T.C.G. Italia_improved communication
2. Improved communication
NEW CATALOGUE RATIONALIZE THE MARKET STRATEGY !"#$"%&'()*(
!"#$%
&'&#(&)
&#)*#+,
-.#".
#/&0.
(
!"#$"%&"'&
!"#$%&"'($')%*+,'!"+-.$/"
0123'4356378
!"#$"%&"'&
!"#$%&"'($')%*+,'+"($,
0123'4356378
!"#$"%&"'&
!"#$%&"'($')%*+,'/%+-."!!,
0123'4356378
!(')*+(
!"#$%&"'!,9%+,:,'!"+-.$/"
0123'4356378
-1;'<3=>??3>41'@'ABC
!"#$"%&'()*( !"#$"%&'()*(
+,'%-
&.&'/&0
&'0"'.10
121',1'3
!"#$%&'()##'#&)*'+(),'-()#./-#+0$'&1).)#+%!/,%('!"##$%&'&()$*+$,*-$%.(*#(./'&+&
!"#$$%&#'(')*'+,-''.'/0/1**'23',4!"#$$%&#'5')*'('/*'+,-''.'6*01**'23',4!"#$$%&#'5'/*'+,-''2'"#89:7%
!2"#$%&'()##'#&)*'+(),'-()#./-#+0$'&1).)#+%!/,%('!"##$%&'&()$*+$,*-$%.(*#(./'&+&
;%8%<2++:23#-'=/*>
3"#$%&'()##'#&)*'+(),'-()#./-#+0$'&1).)#+%!/,%('!"##$%&'&()$*+$,*-$%.(*+$./'(##(
!"#$$%&#'(')*'+,-''.'/??1**'23',4!"#$$%&#'5')*'('/*'+,-''.'6601**'23',4!"#$$%&#'5'/*'+,-''2'"#89:7%
32"#$%&'()##'#&)*'+(),'-()#./-#+0$'&1).)#+%!/,%('!"##$%&'&()$*+$,*-$%.(*+$./'(##(
;%8%<2++:23#-''=/*>
$+%89:'2'"#89:7%@
4(
Realize a single catalogue (joining Sinergia Design and Building catalogues), supplying the documentation on sale prices of serial products and underlining the technical skills of TCG.
The complex marketing strategy creates a confusion between productive areas. The suggestion is to rationalize the company production around hot wire EPS cutting and airbrush painting.
POLITECNICO DI TORINO DAD – Department of Architecture and Design T.C.G. Italia_process guidelines
3. Process guidelines for a strengthen quality in Sinergia Building works
• Finishing: - prefer tactile finishing (trowel-like, mélange effect) to plain colour finishing - avoid gloss finishing which highlight also very little inaccuracy, on the contrary prefer mat finishing - prefer pastel to metallic and mirror effect paintings - be careful to paint oversupply and paint trickling
• Application fields suggestions: - rapid fruition areas (stations, highway stops, …) - areas in which there isn’t a direct contact by sight and touch with EPS manufactured objects (false ceilings, scenic design)
• Built on site suggestions: - thiner stone veneers allows bowed surfaces with narrow curvature radius - be - particularly careful to junctions between EPS blocks - prevent glue leaks
POLITECNICO DI TORINO DAD – Department of Architecture and Design T.C.G. Italia_goals of the support
Goals of EDEN support
1. Identify new application fields and new sales channels that allow a standardization of TCG products: - transport field: aeronautics, nautical, railway;
- urban furniture: fountains, vases, outdoor; - cemetery furniture: chapels, graves, provisional tombstones;
✔
2. Improve the spread of TCG Italia current expertise through a better company communication: - create a new catalogue - rationalize the production and the related marketing strategies in few main productive areas;
✔
3. Strengthen the quality of products and realizations with some process guidelines.
✔
The research
POLITECNICO DI TORINO
DAD – Department of Architecture and Design
Thank you for your attention, for further questions do not hesitate to contact us: