economics notes[1]
TRANSCRIPT
-
8/2/2019 Economics Notes[1]
1/27
UNIT 2
DEMAND ANALYSIS
THE CONCEPT OF DEMAND
Demand is a crucial economic decision variable for the functioning of abusiness enterprise. It reflects the size as well as pattern of market, and
market determines the magnitude of business activities. A study of demand is
imperative for decision takers, as it affects production as well as profit.
Demand-analysis is extensively used in business. Any firms planning
regarding main power utilization, production planning, inventory management,
cost budgeting, market research, pricing decision, advertising budget etc.
need detailed analysis of demand. Demand is the major factor for the survival
of any business. If there is no demand, the out put becomes unwarranted.
DEFINITION
Demand is considered same as want or desire. However, in managerial
economics, demand has a more definite meaning. A good is demanded if it is
useful in satisfying consumers desire. However, if consumer desires a good
but is not able to pay for it, it does not constitute demand. For example, a
beggars desire to buy a car does not mean it is demand, as he is not able to
pay for it. Similarly, a persons desire to have a car, but unwillingness to
purchase it, does not mean demand.
In economics, demand is:
I. Desire for a commodity
II. Ability to pay for the commodity
III. Willingness of consumer to pay for the good
Hence, mere desire is not demand; it has to be backed by ability and
willingness to pay for it. Demand can be defined as quantity of a commodity
that will be purchased at a particular price during a given period or at a pointof time. That is, demand for a good is always stated in terms of price and
time period. A statement that demand for oranges is 200 KG is meaningless.
It should be- demand for oranges is 200 KG by one person at Rs. 10 a KG in
one year.
-
8/2/2019 Economics Notes[1]
2/27
TYPES OF DEMAND
When considering demand for a product, one has to be clear about thesources and uses of that product & the market structure. An understanding of
demand at different levels of aggregation is necessary for policy decisions as
well as managerial decision making. Some important classifications are
discussed below:
a) Demand for consumers goods & producers goods : When demand for a
good is for final consumption, it is called consumers demand. Demand
of goods for future production or for producing goods final consumption
is called producers demand. For example: demand for vegetables,
readymade garments, note books etc are those for final consumptionthat is consumer goods demand. Demand for raw materials, machinery
etc. is for production of other goods, therefore called producer goods
demand.
b) Demand for perishable & durable goods : Consumer & producer goods
can be further classified into non durable or single use or perishable
goods, and durable or repeated use goods. Non durable goods usually
meet current demand like milk, fruits, vegetable etc. Durable goods are
used over a period of time and satisfy current demand as well as long
time or future demands, like furniture, automobiles, fans etc. Durablegoods may also call for replacement of old products. The distinction
between durable and non durable goods is important as durable goods
present more complicated problems for demand analysis than non
durables.
c)Autonomous and derived demand: Autonomous demand is that which is
not tied with demand for other goods. Consumer goods have
autonomous demand. Derived demand is that, which is tied with the
purchase of some parent product. Producers goods have derived
demand. Demand for factor inputs depends upon demand for finalproduct. Money has derived demand.
d) Individual demand and market demand: The demand of an individual
consumer for a commodity is called individual demand, while market
demand is the demand of all consumers in the market for a commodity
at a given price. It is the horizontal summation of all individual
-
8/2/2019 Economics Notes[1]
3/27
demands. Firms are concerned with market demand for there products
while individuals are concerned with their own demand for different
goods.
e) Firm and industry demand: Most goods are produced by more than one
company or firm, and hence there is a difference between company
(firm) demand and industry demand. Demand facing an individual firm
is called firms demand, while demand faced by an entire industry is
called industry demand. This distinction is necessary as there may be
close substitutes for products of a firm, but there are no close
substitutes for an industry product. For example, a Santro might be a
substitute for an Indica, but not for a bike. Firm demand may be
expressed as percentage of industry demand, called as market share
of the firm.
f) Market segment and total market demand: Demand for certain productscan be studied in totality or by breaking it into different segments
based on classifications like product use, distribution channels, age,
size, income etc. of customer. Segments may differ significantly in
respect of delivery prices, profit margins, seasonal patterns etc. when
such differences are great, demand analysis is done in segments. It is
useful in several problem areas.
DEMAND FUNCTION AND DEMAND CURVE
A function explains relationship between two variables. The demand function
for a good is the relation between various amount of commodity that may be
bought and the determinants of those amounts in a given market in a given
period of time.
Thus, demand function shows the various factors on which demand for the
commodity depends.
These determinants of demand are:
I. Price of the commodity. (Px)
II. The prices of related goods substitutes & complements (Py & Pz)
III. Income of consumer. (Y)
IV. Taste and preferences of consumer. (T)
V. Expectations about future prices of commodity. (E)
-
8/2/2019 Economics Notes[1]
4/27
The demand function can be represented as
D= F (Px, Py, PZ, Y, T, E)
The impact of these determinants on demand is explained below:-
I. Price of commodity: Generally, as price of a commodity falls, its demandrises and vice versa, showing an inverse relationship.
II. Price of related goods: If the good is a complementary good such as
sugar & tea, pen & refill, bread & butter, etc. then as price of
complementary good rises, demand for commodity declines. However if
the related good is a substitute, like Tea & Coffee, Scooter & Motor
Cycle, then with increase in price of substitute, the quantity demanded
of the commodity increases.
III. Income of a consumer: With an increase in income of consumer, his
purchasing power increases, thus he buys more goods. Similarly, with
less income he buys lesser goods. There is a direct relationship between
income of consumer & demand.
IV. Expectation about future prices: If consumer expects prices of certain
good to rise in near future, he would demand more of it in present, the
demand would increase. On the other hand if he expects price to fall in
near future, he would demand less of the good in present.
V. Tastes & Preferences: The demand for a good that is liked by consumers
is more than the demand for a good that not preferred.
Demand Curve and Schedule
A demand curve and a demand schedule consider only the relationship
between price and quality demanded.
A demand schedule shows the different amounts of quantity demanded at
different levels of price of that commodity. A demand curve is a plot of the
demand schedule. An example is given below:
Demand schedule & curve for Apples
Prices of Apple (Per KG) Quantity demanded (in KG)
-
8/2/2019 Economics Notes[1]
5/27
12 1
11 2
10 3
9 4
8 5
7 6
12
11
10
9
8
7
0
1 2 3 4 5 6
The demand curve is seen to be negatively sloped, which shows that the
demand is higher at lower prices & vice versa.
This is the LAW OF DEMAND.
LAW OF DEMAND
-
8/2/2019 Economics Notes[1]
6/27
This law explains the general tendency of consumers to buy more of a good at
a lower price and less of it at a higher price. According to the law of demand,
Demand for a good varies inversely with it price. That is, demand for good
increases as its price decreases and it decreases as the price increases.
MOVEMENT ALONG DEMAND CURVE
(Extension & contraction in demand)
When quantity demanded of a commodity falls as a result of rise in price, its
called extension or expansion in demand. If the quantity demanded rises with
a fall in price. Its called contraction in demand.
It can be shown by moving down or up along a demand curve. Example
Price D
P1 A
P2 B
D
O Q1 Q2 Quantity
A movement from A to B indicates an extension in demand from Q1 to Q2
because of fall in price from P1 to P2. Similarly; movement from B to A showscontraction in demand from Q2 to Q1, due to rise in price from P2 to P1.
SHIFT IN THE DEMAND CURVE
(Increase or decrease in demand)
-
8/2/2019 Economics Notes[1]
7/27
The factors or determinants of demand other than the price of goods are
assumed to be constant for the period of which demand curve is prepared.
However, if these factors change, a new demand curve would come into
existence, either at a lower level or a higher level.
This is shown below with the help of a diagram:-
Y
Price D D D
D D
D
Quantity Demanded X
It can be seen from the diagram that if there is a change in determinants of
demand other than price, the demand curve shifts towards the left or right
(downward or upward).
Thus if there is a rise in income of consumer: or increase in price of substitute
good, or decrease in price of complementary good, or expectation of futurerise in price: the demand increases, & demand curve shifts form DD to DD.
Similarly, if there is a decrease in income of customer, or decrease in price of
substitute good, or increase in price of complementary good, or expectation of
future decrease in price, then demand decreases & demand curve shifts from
DD to DD towards left.
-
8/2/2019 Economics Notes[1]
8/27
UTILITY ANALYSIS
UTILITY
The notion of utility was introduced by British Philosopher Jeremy Bentham in
1780s. The concept was adopted in economics in early 19th century with
works of Stanley Jevons, Alfred Marshall etc. The term utility refers to poweror property of a commodity to satisfy human needs. For example, bread has
the power to satisfy hunger, water has power to quench thirst. All goods that
individuals consume or hold process utility.
Thus, utility is the want satisfying power of a commodity. But it is relative to
a persons need. So in other words, whether a commodity possesses utility
depends upon whether the consumer has need for it. For example, a smoker
does not derive any utility from cigarettes etc. The greater is a consumers
need, greater is the utility derived.
The concept of utility is ethically neutral, that is, there is no good or bad: or
even useful or harmful. Drugs are bad and harmful but they yield utility to
drug takers. This utility is subjective satisfaction obtained by consumer from
consumption of any goods or service. It has a neutral value.
MEASURABILITY OF UTILITY
There are two approaches to measuring utility- cardinal and ordinal
measurement.
1. CARDINAL APPROACH: - This approach was accepted by classical & nonclassical economists. According to this approach utility can be measured
numerically and can also be expressed in terms of money. For example,
it can be said that utility of a, b, c & d commodities is 10, 9, 8 & 7
respectively.
2. ORDINAL APPROACH: - According to this approach, utility is not
quantifiable. It is only an expression of consumers preference for one
commodity over another. That is, a consumer can compare the utility he
derives form different commodities, but he can not give it a particular
numerical value.
CARDINAL APPROCH TO UTILITY ANALYSIS
Under this measure, it is possible to estimate the amount of utility derived
form various units of a commodity in terms of some quantifiable unit.
Economists suggested measurement of utility in terms of money.
-
8/2/2019 Economics Notes[1]
9/27
MEASURES OF CARDNAL UTILITY
1) Marginal utility (MU)
Marginal utility is the utility of last unit, or, the addition to total utility by
consumption of the additional unit of commodity. For example, total utility of
consuming ten units of some commodity is total satisfaction those ten unitsprovide. Marginal utility of tenth unit consumed is satisfaction added by
consumption at that unit.
Symbolically:
MU10 = TU10 TU9
Where MU10 = marginal utility of 10th unit
TU10 = Total utility of 10 units
TU9 = Total utility of 9 units
In general: we can say:
MUn = TUn Tun-1
Where n is the number of units for which marginal utility is determined. Also
marginal utility is defined as ratio of extra utility to extra unit of commodity
consumed.
MU = (TU) (Q = units consumed)
Q
2) TOTAL UTILITY (TU)
It represents the sum of all the utilities derived from the total number of unitsconsumed. It is sum of marginal utilities of different units of commodity.
Symbolically:
TUn = MU1 + MU2 + .. MUn
Or:
-
8/2/2019 Economics Notes[1]
10/27
TUn = MU
3) AVERAGE UTILITY
It is derived by dividing total utility by the number of units of the commodity
consumed. In terms of symbols: AU= TU/Q
RELATION BETWEEN TU, MU and AU:
This relation can be studied with help of an example, as given below:
Number of
units
Totalutility
marginalutility
Averageutility
1 10 10 10
2 18 18-10=8 18/2=93 24 24-18=6 24/3=8
4 28 28-24=4 28/4=75 30 30-28=2 30/5=66 30 30-30=0 30/6=57 28 28-30=-2 28/7=48 24 24-28=-4 24/8=3
The total utility rises with consumption of additional units of commodity but
the increase is not constant, but falls steadily. That is, the total utility rises at
-
8/2/2019 Economics Notes[1]
11/27
a falling rate. When TU reaches a maximum value, marginal utility becomes
zero. Before this point, though marginal utility falls, it remains positive.
After the point when TU is maximum, an increase in consumption results in
falling TU, and MU becomes negative.
AU is always positive & its curve remains above x-axis, downward sloping likethe MU curve.
LAW OF DIMIISHING MARGINAL UTILITY
The law of diminishing marginal utility states that- The utility that a consumer
derives from the consumption of an additional unit of a commodity keeps
decreasing with every increase in the stock of the commodity which he
already has.
The law means that as one gets more & more units of the same commodity,
the utility from each successive unit goes on decreasing. This is because the
more we get of one thing, the intensity of our desire to have more of it falls.
Assumptions to the law
1) Rationality: The consumer is assumed to be rational. He aims at
maximization of utility subject to the constraint imposed by his given
income.
2) Cardinal measurement of utility: Utility is assumed to be measurable
and can be quantified. It can be added, subtracted, multiplied & divided
3) Continuity: The consumption process is assumed to be continuous, that
is, there is no time gap between consumption of two successive units of
commodity.
4) Homogeneity: The commodity is homogenous, that is, all units
consumed are same quantitatively & qualitatively.
5) Independence of utilities: Utilities of different commodities are
independent of one another. Utility derived from consumption of one
good does not depend upon consumption of other goods.
6) Constancy: The personal, social & mental conditions of consumer are
assumed to be constant. Also his income, tastes, fashion, & habits
remain same.
7) Marginal utility of money is assumed to be constant.
-
8/2/2019 Economics Notes[1]
12/27
CONSUMER EQUILIBRIUM: LAW OF EQUIMARGINAL UTILITY
A consumer spends his income on many goods & services. The aim of the
consumer is to maximize utility derived from the various goods he has
consumed, so he has to distribute his income in a way that he is in
equilibrium, at a point of maximum utility is derived. Let us assume two goods
A & B Let the price of A be PA & price of B be PB.
Then, the principle of equi-marginal utility states that consumer would be in
equilibrium (i.e. Maximum utility) when he allocates his expenditure on various
goods he consumes such that the utility of last rupee spent on each good is
equal.
From law of diminishing marginal utility, it can be derived that consumer is in
equilibrium when the quantity of commodity is purchased in such a way that
MU derived from it is equal to the price paid for it multiplied by marginal utility
of money (assumed to be constant)
MUA = PA * MUM___________(1)
MUB = PB * MUM___________(2)
MUM = MUA &
PA
MUM = MUB
PB
Where MUM = marginal utility of money
Dividing (1) by (2)
MUA = PA or
MUB PB
MUA = MUB
PA PB
It can be seen that consumer is in equilibrium when MU of money to the
consumer is equal to ratios of marginal utilities of commodities with respect to
their prices.
ORDINAL APPROACH TO UTILITY ANALYSIS
-
8/2/2019 Economics Notes[1]
13/27
Since it was seen that cardinal measurement of utility is not realistic, a new
approach was introduced by Edgeworth (1881) and Vilfred Pareto (1906).
Under this approach, a consumer is able to rate various combinations of goods
and services in order of his preference for them. He can indicate whether he
prefers one commodity bundle to another or whether he is indifferent between
them. In case he is indifferent, it means he has equal preference for bothcommodity bundles. This is called the indifference curve analysis.
INDIFFERNCE CURVE
An indifference curve shows the various alternative combinations of goods
which provide some level of satisfaction to the consumer.
One indifference curve shows one particular level of satisfaction. Below is a
representation of an indifference schedule, which enlists all such combinations
of two goods in a tabular form that give exactly the same total satisfaction to
the consumer. An indifference curve for the two goods is then plotted.
Combination Units of X plus Units of Y
A 1 + 64
B 2 + 48
C 3 + 36
D 4 + 25
E 5 + 15
F 6 + 8
The consumer is indifferent towards its combinations A,B,C,D,E, and F. the
consumer has no special inclination for any one combination. Plotting these
values of combinations, taking units of goods X on X- axis and units of good Y
o Y axis give its indifference curve IC.
-
8/2/2019 Economics Notes[1]
14/27
0
10
2030
40
50
60
70
0 2 4 6 8
Commodity X
Comm
odityY
A consumer may have a large number of indifference curve, representing a
different level of utility derived thus, if one draw a large number of
indifference curve together, each showing a different level of satisfaction weget and indifference map as shown below.
Y
Units of Y
IC4
IC3
IC2
IC1
Units of X
In this diagram, IC1, IC2, IC3, & IC4 represent different levels of satisfaction
received from combination of two commodities X & Y.
ASSUMPTIONS OF INDIFFERENCE CURVE ANALYSIS
1) Ordinal utility: It is assumed that utility can be measured not in
numerical figures, but in ordinal measures, that is, consumer can
arrange combinations of two goods in ascending or descending order of
preference.
IC
-
8/2/2019 Economics Notes[1]
15/27
2) Non-satiety: The consumer has not reached the point of saturation in
consumption of any good. He always wants to buy more of commodities
to reach higher indifference curves.
3) Two commodities: It is assumed that consumer has a fixed amount of
money which he spends entirely on two commodities only, given
constant prices of both commodities.
4) Rationality: The consumer is assumed to be rational and he seeks to
maximize his satisfaction. He has full knowledge of market conditions
and is consistent in his choice, if he chooses combination A in one
situation and not B, then he always chooses A instead of B when both
are available.
5) Transitivity: It is assumed that consumers choices are transitive: that is
if there are 3 commodity bundles A B and C and he prefers A to B
and prefers B to C, then he prefers A to C.
6) Diminishing marginal rate of substitution: It means if more of X is
consumed, to remain at same satisfaction level, some of Y has to be
given up. As consumer buys more & more of X, he is ready to give up
lesser & lesser of Y.
PROPERTIES OF INDIFFERENCE CURVE
1) Indifference curves slope downward from left to right and thus, have a
negative slope, showing that if there is increase in amount of onecommodity, then there is decrease in amount of the other one.
2) Indifference curves are convex to the origin.
3) Two indifference curves cannot touch or intersect as each curve
represents a different level of satisfaction.
4) Higher indifference curve represent higher level of satisfaction.
5) Indifference curves need not be parallel to each other.
Budget line
A consumer cannot decide to buy a particular combination of goods only on
the basis of indifference curves, as these curves do not show which
combination will give him the best for his money. Besides the preference
pattern of consumer, two other factors that lead to choosing a particular
-
8/2/2019 Economics Notes[1]
16/27
combination are: income of consumer and prices of the commodities. This
information is given by the budget line of the consumer.
The budget line shows all combinations of two commodities that a consumer
can buy spending his entire income for given prices of two commodities.
For example, a consumer with total income of Rs.100 can buy 50 units of X atprice Rs. 2 per unit of X: and he can buy 25 units of Y at price Rs. 4 per unit of
Y.
This is show as follows:
0
5
10
15
20
25
30
0 10 20 30 40 50 60
Commodity X
Com
modityY
In the figure: AB is the budget line. All points on AB show various combinations
of X & Y that consumer can buy given his income & prices of X & Y.
CONSUMER EQUILIBRIUM
An indifference map shows the tastes and preferences of the consumer
independently of market conditions with regard to two goods. On the other
hand, budget line shows the purchasing power or opportunities open to the
consumer in the market, given his income and prices of commodities. Both
these instruments are important to determine what the consumer actually
does in the market, that is, how the consumer spends his money for two goods
maximizing his satisfaction.
To get consumers equilibrium (which occurs at highest level of satisfaction
possible given his income), we superimpose the budget line and indifferencemap. The consumer would prefer to be on the highest indifference curve
possible reachable by his budget line to maximize his satisfaction. In the below
figure, the equilibrium is graphically represented. AB is the budget line. The
consumer may choose any combination of commodity X and commodity Y on
the budget line. Three indifference curves IC1, IC2, IC3 are shown in the figure.
However, consumer can not purchase any combination of X and Y that lies on
A
B
-
8/2/2019 Economics Notes[1]
17/27
IC3, as it is out of reach of his budget line. Also, he would not choose a
combination below his budget satisfaction. Thus, in any case, equilibrium must
lie on budget line. But, C and D points will not give maximum possible
satisfaction as they lie on a lower indifference curve IC1, and it is possible to
reach a combination of commodities on a higher indifference curve IC2 with
the same money income.
IC2 is the highest indifference curve that consumer can reach given his budget
constraint. The budget line touches IC2 at point E, which is the point of
consumers equilibrium. At this point, consumer buys OM amount of X and ON
amount of Y.
Given the budget line, consumer attains equilibrium at a point where the
budget line is tangential to an indifference curve.
PRICE EFFECT
If price of one of the commodities changes, while other things like income
remain constant, the consumers equilibrium will shift to a new budget line.
With a change in price of good X, the consumers purchasing power in terms ofX changes. Thus, if price of X falls, consumer can buy more of X with the same
income, and therefore, budget line shifts towards the right on X- axis. But
starting point of budget line on Y-axis remains same, as there is no change in
price of Y.
The price effect is discussed in the figure given below.
O
A
B
C
D IC1
E
IC2
IC3
M
N
Commodity X
Commodity Y
-
8/2/2019 Economics Notes[1]
18/27
In the figure, initial consumer equilibrium is at point E, where original budget
line AB, touches indifference curve IC1. Now, if price of commodity X falls, the
budget line shifts from AB1 to AB2 (as consumer can buy more of X with same
budget). The new budget line is tangent to higher indifference curve IC2 at
point E2. The new equilibrium of consumer is at point E2, which is to the right of
E1. His level of satisfaction has increased as a result of fall in price of X.
If price of X falls further, the budget line will shift to the right again, to AB3,
which is tangent to an even higher indifference curve IC3, at point E3.
When all these equilibrium points are joined together, we get price
consumption curve.
The price consumption curve measures the price effect, which is the effect of
changes in price of one commodity on the consumers demand for this
commodity, while price of other commodity & consumers income is constant.
PCC is the price consumption curve.
DERIVATION OF DEMAND CURVE FROM PRICE EFFECT
A demand curve depicting the relationship between price and quantity
demanded can be derived from the price consumption curve.
In the figure quantity of commodity X is taken along the X-axis and income of
consumer is taken on Y-axis, (in this case Rs. 60). As price of commodity
falls, the budget line shifts to the right. Thus, new equilibrium point is to right
O
A
E1
O
B3
B2
B1
E3
PCC
E2
IC2
IC3
IC1
Commodity X
Commodity Y
-
8/2/2019 Economics Notes[1]
19/27
of previous equilibrium. If price of X falls from Rs. 3 to Rs. 2 to Rs. 1.5, he gets
a series of equilibrium point E1, E2, E3 on budget lines AB1, AB2 and AB3. The
consumer can purchase at most 20, 30 and 40 units of X respectively. By
joining E1, E2, and E3, we get the price consumption curve.
In the lower panel of the diagram, the demand curve can be derived using the
upper panel. The lower panel also measures quantity of commodity X on the
X- axis, but measures price of X on the Y-axis. Each point on price
consumption curve PCC shows a particular quantity of commodity X,
corresponding to some price of the commodity X.
-
8/2/2019 Economics Notes[1]
20/27
To derive demand curve from PCC, Consider equilibriums point E, on budget
line AB1. The quantity demanded at this point is OQ1. Price of X for this budget
line is equal to money income divided by number of units of X that can be
bought with this income.
Price= Rs. 60/20= Rs. 3. At E1 he buys Q1 amount of X.
Now; Price OP & quantity OQ, become point R or demand curve in lower panel.
Similarly from point E2; quantity demanded of X is OQ2, and price is equal to
money income divided by total units that can be bought with given budget
line, i.e., price = 60/30 = 2Rs.
Also, at point E3: OQ3 units of commodity are demanded at price = 60/40 =
1.5Rs. These combinations of quantity of X demanded & price of X are shown
as points S & T on the lower panel. Joining R, S & T gives us the demand curve.
INCOME EFFECT
If the income of consumer changes, his equilibrium will also change, given the
prices of commodities X & Y are constant. That is, with a change in consumers
income, his budget line would shift, resulting in a new equilibrium point with a
new indifference curve.
The effect of change in consumers income on his total satisfaction or
purchase of the two commodities given prices of the two commodities,
preferences & taste of consumer remaining constant, is called income effect.
In the figure given below, the consumer is in equilibrium at E1, where original
budget Line AB, is tangent to indifference curve IC1. At this point, consumer
buys OX1 of good X and OY1 of good Y. When money income of consumer
increases, budget line will shift upward, and will be parallel to original budget
line A1 B1. With increased income consumer would be able to choose a
combination of X & Y on a higher indifference curve IC2. The new budget line
A2 B2 touches IC2 at E2 which is the new equilibrium point. At this point
consumer buys OX2 of X and OY2 amount of Y.
If income of consumer increases further, the budget line will shift upward
again, to new line A3 B3, parallel to previous budget lines. The consumer in
now in equilibrium at E3, where A3 B3 touches higher indifference curves IC3.
-
8/2/2019 Economics Notes[1]
21/27
The curve obtained by connecting successive consumers equilibrium points
(E1, E2, E3) at various curves of the consumers income is known as the incomeconsumption curve (ICC), while other things remain unchanged.
The ICC traces out income effect of the change in money income of consumer.
BREAK UP OF PRICE EFFECT INTO INCOME EFFECT AND SUBSTITUTION
EFFECT
Whenever price of a commodity falls (price of other commodity & income
remaining the same), the consumer substitutes this commodity for the other
one so as to maintain original standard of living. This is known as substitution
effect. Thus, substitution effect can be defined as change in consumption oftwo commodities as a result of change in their relative prices (given constant
income), so that consumer is also to maintain original standard of living by
remaining on the same indifference curve.
Whenever the price of a commodity changes; the real income of the consumer
changes. That is, even though his monetary income remains fixed, his
purchasing power changes, shown as a change in real income. As a result, the
consumer is able to rearrange his purchase. This shows that income effect
exists as an element of price effect. Also, a consumer substitutes a relatively
expensive commodity for a relatively cheaper one. Thus substitution effect isalso present in price effect.
Thus, price effect is broken up into income effect and substitution effect. This
is shown by two methods: - Hicksian approach and Slutsky approach.
BREAK UP OF PRICE EFFECT UNDER HICKSIAN APPROACH:-
J.R. Hicks defined original standard of living in terms of level of satisfaction.
According to him, when relative prices of two commodities change, the
consumers real income purchasing power is altered in a way that he remains
on the same satisfaction level, that is, at the same indifference curve.
Consider two commodities tea and coffee. Tea is shown on X-axis and coffee is
shown on y- axis. The initial budget line is tangent to indifference curve IC1 at
point E. The consumer purchase OX1 quantity of Tea and OY1 quantity of
coffee. Now, if price of Tea falls, the consumers real income or purchasing
power increases. With decline in price, the consumer equilibrium shifts to point
-
8/2/2019 Economics Notes[1]
22/27
F, where the new budget line is tangent to higher indifference curve IC2. The
movement from point E to F is called price effect. At the new equilibrium point,
the consumer purchases OX2 of Tea, i.e., increases consumption of tea by
X1X2. This price effect can be broken into substitution effect and income effect.
Now, due to fall in price, consumers real income is increased. To bring
consumer back to original satisfaction level, the real income has to be brought
back to the original level. Thus, we assume that some income in terms of tea
& some income in terms of coffee is taken away from the consumer. This is
shown in the graph by a parallel downward shift in the new budget line AB, till
it becomes tangent to the original indifference curve IC1. The purpose of this
shift is to maintain the initial satisfaction level of the consumer. In the figure,
the compensating budget line is CD, tangent to IC1 at point G. The movement
from E to G shows the substitution effect in terms of Hicks. As tea is cheaper,
consumer demands more of tea & less of coffee. The quantity of tea
demanded rises form OX1 to OX3, while quantity demanded of coffee reducesfrom OY1 to OY2.
To differentiate the income effect from price effect the amount of money
assumed to be taken away from the consumer is now assumed to be given
back to him, so that he is back from point G on IC1 to point F on IC2. Thus, the
consumer has higher purchasing power. The movement from G to F is due to
increase in income, and hence shows the income effect.
It can be said that the move from E to F happened in two stages, that is, first,
due to substitution effect, equilibrium moves from E to G on the same
indifference curve, and then due to income effect, equilibrium shifts from G to
F. Thus price effect is a sum of income effect & substitution effect.
-
8/2/2019 Economics Notes[1]
23/27
Price effect (P.E.) = X1X2 (E to F)
Substitution effect (S.E.) = X1X3 (E to CT)
Income effect (I.E.) = X2X3 (CT to F)
X1X2 = X1X3 + X2X3
P.E. = S.E. + I.E.
ELASTICITY OF DEMAND
The concept of elasticity shows the relation of one variable with respect to a
change in other variable, on which it depends.
Thus, elasticity of demand in general explains the magnitude of impact of the
changes in factors influencing demand on the quantity demanded. Thus,
elasticity of demand is the ratio of change in quantity demanded to thechange in factors affecting demand. These factors may be price of a
commodity, income of the consumer, price of related commodities,
advertisement expenditure etc.
The concept of elasticity tells not only that demand is responsive to changes in
price of commodity, but also shows the degree of responsiveness of demand
to such changes in price.
When we consider responsiveness of demand to a change in price of
commodity purchased, it is called price elasticity of demand. Similarly, we
have income elasticity which measures responsiveness of demand with
respect to change in income of consumer, and cross elasticity measuring
responsiveness of demand with respect to change in price of related goods.
Price elasticity of demand is the most commonly discussed type of demand
elasticity. An example is given below.
The figure shows two demand curves DD and DD. Let DD be the demand for
wheat in Delhi and DD be the demand for wheat in Chennai. At Rs. 40 per kg,
demand for wheat in Delhi as well as Chennai is 25kg per house hold per
month.
If the price of wheat falls to Rs 30 in both cities, the demand for wheat in Delhi
rises to 30 kg per household per month, while in Chennai the demand rises to
35kg per household per month. This shows that demand for wheat is more
elastic in Chennai as compared to Delhi.
-
8/2/2019 Economics Notes[1]
24/27
TYPES OF DEMAND CURVE ON BASIS OF ELASTICITY
Depending upon the change in price of the commodity consumed, the demand
curves can be classified in 5 types based on price elasticity of demand.
1. Perfectly elastic demand curve:
It is situation where with any change in price, the demand for the
commodity disappears, that is the demand is affected very highly. This
can be shown by a horizontal straight line parallel to the x-axis.
At any price higher or lower than OP, there is no demand for the commodity.
This is a hypothetical situation, not seen in real life.
2. Perfectly inelastic demand curve:
-
8/2/2019 Economics Notes[1]
25/27
In this case there is no responsiveness of demand with change in price, that is,
the elasticity of demand is zero, with any change in price the quantity
demanded remains same. It is shown by a vertical straight line parallel to Y
axis.
At any price, the demand remains same. This is also a hypothetical situation
not observed in reality.
3. Unitary Elastic Demand Curve:
In this case, demand varies proportionately with change in price, that is, the
quantity demanded changes in proportion to change in price. This is shown by
a straight line with unit slope.
In this case, a unitary change in price means a unitary change in quantity
demanded. This is a more realistic situation as compared to the above two.
4. Highly elastic demand curve:
-
8/2/2019 Economics Notes[1]
26/27
This is a situation where demand is very responsive to change in price.
That is, with a small change in price, the quantity demanded changes
very much. It is shown by a straight line with a blunt slope.
Here, a small change in price givers rise to a large change in quantity
demanded. This is a very realistic situation.
5. Highly inelastic demand curve:
In such a situation, demand is not much responsive to a change in price. That
is, with a huge change in price, the quantity demanded does not change
much. This is shown by a straight line with a steep curve.
-
8/2/2019 Economics Notes[1]
27/27
This is also a case which is quite realistic. A small change in quantity
demanded is brought about by a large change in price.