eclypse™ connected equipment -...

ECLYPSE™ Connected EquipmentController

OverviewThe ECLYPSE Connected Equipment Controlleris designed to satisfy the needs of a wide rangeof HVAC applications such as small andmedium terminal applications. It integrates acontrol, automation and connectivity server,power supply, and I/O in one convenientpackage. It supports BACnet/IP communicationsand is a listed BACnet Building Controller (B-BC). In addition, the ECY-303-M3 modelsupports Modbus to connect to meters, VariableFrequency Drives, etc.This programmable controller comes with anembedded web server that enables web-basedapplication configuration and a visualizationinterface. It also features embedded scheduling,alarming, and logging. Control logic and graphicuser interface can be customized as required forthe application.

ApplicationsThe ECLYPSE Connected Equipment Controllermeets zone application requirements, including:£ Rooftop unit, fancoil unit, small air handling

unit, heat pump, and chilled beam£ Lighting, power monitoring, and other

applications.

Features & BenefitsConnectivityThe different types of connections supported bythe Connected Equipment Controller are asfollows:

IP wired connectionInternal switch with two Ethernet ports allowsthe controllers to be wired in a star or daisy-chain topology. With a daisy-chain topology:£ Fewer wire runs to a centralized switch are

required, thereby achieving installation andcost reduction.

£ A laptop can be connected to the secondEthernet port for direct programming,configuration, and commissioning using EC-gfxProgram or ENVYSION.

IP wireless (Wi-Fi) connection£ Wi-Fi Client - Connection to the building’s

existing Wi-Fi network or to anothercontroller’s Wi-Fi Hotspot or Access Point.

£ Wi-Fi Access Point - extending the building’swired IP network to your Wi-Fi Clientdevices.

D a t a s h e e t

2 / 10 ECLYPSE Connected Equipment Controller

£ Wi-Fi Hotspot - your own wireless areanetwork, for wireless communicationbetween the controllers, or with a mobiledevice or laptop for configuration,commissioning and servicing.

Both IP wired and wireless (Wi-Fi) connectionThe availability of both Ethernet ports and USBports for the Wi-Fi Adapter, allows forsimultaneous wired IP and Wi-Fi communicationon the same controller, which means you canchoose and combine these connection methods.For example, Wi-Fi can be used between twocontrollers to jump a large atrium.

Connect from anywhereControl technicians, facility managers,occupants, and others can easily connect to thesystem, on-site or off-site, using the differentavailable tools:£ ENVYSION to create and view the graphical

interface£ EC-gfxProgram to create custom control

sequences£ myDC Control to view, edit, and configure

system operating parameters

IP Communication£ Increased speed and improved handling of

numerous trend logs that enableapplications, such as advanced analyticsthat require a large amount of data.

£ Experience faster response and save timewhen programming, configuring, creatingand viewing graphics, and upgrading yoursystem.

£ Control technicians can connect theECLYPSE Wi-Fi Adapter to the ConnectedEquipment Controller thereby creating a Wi-Fi Hotspot network. The control techniciancan then connect wirelessly to the systemusing a mobile device or laptop, for faster,easier system configuration, programming,commissioning, and servicing.

£ Hostname management allows the controllerto be addressed by a nickname to facilitatenetwork management.

Open to Web ServicesWith the RESTful API, the ConnectedEquipment Controller’s data can be accessedfrom different applications, such as energydashboards, analytics tools, and mobileapplications. The RESTful API documentationexplains the implementation protocol for thisinterface.

Preloaded Application and GraphicsThe Connected Equipment Controller is a plugand play device that saves time and moneysince no programming or graphic design isneeded as it comes with ENVYSION™ Viewerand the associated preloaded rooftop unitapplications and graphics pre-installed.Also, no additional tools are required; only aweb-browser is needed when you are using thepre-loaded application through ENVYSION. Ifthe pre-loaded application does not meet theapplication requirements, you can program itusing EC-gfxProgram.

HTML5 Visual InterfaceThe Connected Equipment Controller comesembedded with ENVYSION Viewer andxpressENVYSION.

ENVYSION Viewer – Web-based graphical userinterfaceThe embedded ENVYSION viewer provides fastloading of visual applications through native webpages with absolutely no browser plug-ins. Hostand view preloaded graphics, and accessschedules, alarms, and trend logs directly fromyour Connected Equipment Controller.

xpressENVYSION – Workflow oriented graphi-cal user interface configurationxpressENVYSION offers a simplified andstreamlined experience in a workflow oriented,drag & drop GUI environment while ENVYSIONstill offers the full customization features andediting environment.

ECLYPSE Connected Equipment Controller 3 / 10

ProgrammabilitySupports Distech Controls’ EC-gfxProgram,which makes Building Automation System(BAS) programming effortless, by allowing youto visually assemble building blocks to create acustom control sequence for any HVAC ,lighting, or building automation application.

Batch EC-gfxProgram Projects andFirmware DownloadEC-gfxProgram projects can be downloaded inbatch to multiple controllers, for greater timesavings. Batch firmware update can also beperformed on multiple controllers.

Simplified Network CommissioningThe XpressNetwork Utility saves you time andexpense by giving you increased control overmultiple ECLYPSE controllers through devicediscovery and batch operations such asconfiguring, programming, and updating multipleECLYPSE controllers on the network.In addition, with the embedded step by stepCommissioning Wizard, all configurationoperations can be setup and applied in one go.Increase productivity using the xpressNetworkCompanion mobile app, making it easier toidentify and locate a controller on the network.Use the QR Code marked on ECLYPSEcontrollers to easily collect key controller dataand to facilitate its network integration withxpressNetwork Utility.

BACnet/IP Device (pending)The Connected Equipment Controller is BTL-listed as a BACnet Building Controller (B-BC)and is certified WSP B-BC (Europe) and AMEVAS-A & AS-B (German-speaking countries). Itsupports BACnet/IP for faster communication incomparison to the traditional twisted paircommunication bus.

Multi-Protocol SupportThe Connected Equipment Controller optionallysupports both Modbus TCP devices byconnecting them to the controller’s IP networkand Modbus RTU devices by connecting themdirectly to the controller’s RS-485 port.Controllers with the Modbus communicationsoption can integrate a wide variety of Modbusdevices such as power and water meters,Variable Frequency Drives, air flow sensors,and more, without the need for additionalhardware such as a gateway.

FIPS 140-2 Level 1 CompliantFIPS 140-2 Level 1 compliance provides anenhanced level of security to protect data thecontroller is collecting and sharing making itsuitable for use in the most sensitiveenvironments.

Weather ForecastThe weather forecast is directly available fromthe internet to be shown on a connected ECx-Display or to be used by the controller’s code.

Smart Room Control SupportThe Smart Room Control solution is an end-to-end system for the control of HVAC equipment,lighting, and shades/sunblinds, achieving thehighest levels of comfort for occupants whilecutting costs from installation time and wiring/material requirements to energy consumption.This solution combines:£ Lighting and shade/sunblind expansion

modules to control lights (DALI, on/off ordimming) and shades/sunblinds (24 VDC or100-240 VAC, up/down and angle rotation).

£ Multi-sensor combining motion andluminosity (Lux) sensors and equipped withan Infrared receiver that works with aconvenient remote control.

£ Wireless (infrared) personal remote controlfor increased occupant comfort.

£ Allure™ Series Communicating Sensors forincreased occupant comfort settings.

Allure™ Series Communicating Sensor SupportThese controllers work with a wide range ofsensors, such as the Allure SeriesCommunicating Sensors that are designed toprovide intelligent sensing and control devicesfor increased user experience and energyefficiency.


£ Allure EC-Smart-Vue sensors feature abacklit-display and graphical menus thatprovide precise environmental zone control,with any combination of the following:temperature, humidity, CO2, and motionsensor.

£ Allure EC-Smart-Comfort sensors featurecolored LED indicators to provide userfeedback, rotary knobs to adjust the setpointoffset and fan speed, and an occupancyoverride push button. This sensor can alsobe expanded with a combination of up to 4add-on push button modules for lighting andshade/ sunblind control.

£ Allure EC-Smart-Air sensors combineprecise environmental sensing in a discreetand alluring enclosure for temperature,humidity, and CO2.

MobilityThe controller can be remotely accessed toprogram, configure, or maintain the installationthus reducing costs associated with on-sitevisits. Through a mobile device or PC, a rangeof tasks can be performed using the followingfree-to-use tools and interfaces:£ ENVYSION web-based graphic design and

visualization interface£ EC-gfxProgram graphical programming

interface£ myDC Control mobile application

Software Configurable OutputsFor greater flexibility, two of the controller’soutputs can be software configured to functioneither as a universal output (0 or 12VDC, PWM,Floating, 0 to 10VDC, 0 to 20mA) or as a digital24VAC triac output.

I/O Status LEDsThe status LEDs allows the user to confirm thestatus of the inputs/outputs and facilitatecommissioning and troubleshooting.

Color-Coded, Rising Cage TerminalsTerminal blocks are uniquely identified andcolor-coded for clarity and to prevent wiringmistakes. The rising cage clamp terminal blockconnectors offer a more robust and secure wireconnection, designed to withstand activity andvibrations.

Robust ProtectionThe I/Os are protected against mis-wiring andfaults to prevent damage caused by incorrectwiring or other mishaps.

Alarms, Trend Log, Schedule SupportEmbedded alarms, trend log and schedulesupport allows for fully distributed data and logicproviding a more robust system. Embeddedtrend logs simplify system troubleshooting whencompared to a centralized system.

Email Notifications ServiceTechnicians & facility managers can receiveautomatic email notifications for system statusand alarms to ensure faster system servicingand response time. Email notification text canbe customized to provide pertinent informationabout the issue at hand.


Model Selection

Connected Equipment Controller

Model ECY-303 (SI) ECY-303(IMP)

ECY-303-M3(SI)

ECY-303-M3(IMP)

Points 16-Point 16-Point 16-Point 16-PointUniversal hardware inputs 8 8 8 818 Vdc power supplyUniversal output 2 2 2 2Digital (triac) outputs 4 4 4 4Digital / Universal outputs 2 2 2 2Modbus TCP & RTU DevicesSupported

0 0 3 3

ENVYSION ViewerPreloaded Apps in SI (Metric) unitsPreloaded Apps in Imperial (US) units

AccessoriesECLYPSE Wi-Fi Adapter Wi-Fi Adapter for ECLYPSE Connected Controllers.


Product SpecificationsPower Supply InputVoltage Range 24VAC; ±15%; Class 2Power Consumption:£ Nominal 18VA; all external loads excluded, no USB peripherals£ Full Load 36VA; external 24VAC loads excludedFrequency Range 50 to 60HzOvercurrent Protection Field replaceable fuseFuse Type 2A, fast-acting, 5 × 20mm (GMA-2A)

CommunicationsEthernet Connection Speed 10/100 Mbps£ Addressing IPv4 or HostnameBACnet Profile BACnet Building Controller (B-BC)), AMEV AS-A and AS-B (pending)BACnet Listing BTL, WSP B-BCBACnet Interconnectivity BBMD forwarding capabilitiesBACnet Transport Layer IPWeb Server Protocol HTML5Web Server Application Interface REST API

Supported Wireless Connectivity:£ Wireless Adapter Optional, USB Port Connection£ Wi-Fi Communication Protocol IEEE 802.11b/g/n and 802.11s£ Wi-Fi Network Types Client, Access Point, Hotspot

SubnetworkCommunication RS-485Cable Cat 5e, 8 conductor twisted pairConnector RJ-45Connection Topology Daisy-chainMaximum number of supported devices per controller combined 4£ Allure EC-Smart-Vue Series Up to 41

£ Allure EC-Smart-Comfort Series Up to 4£ Allure EC-Smart-Air Series Up to 41

£ EC-Multi Sensor Up to 42

£ ECx-Light-4 / ECx-Light-4D / ECx-Light-DALI Up to 22

£ ECx-Blind-4 / ECx-Blind-4LV Up to 22

1. A controller can support a maximum of two Allure Series Communicating Sensor models equipped with a CO2sensor. The remaining connected Allure SeriesCommunicating Sensor models must be without a CO2 sensor.

2. For supported quantities, see the ECLYPSE USER GUIDE file available for download from SmartSource.

HardwareProcessor Sitara ARM processorCPU Speed 600MHzMemory 4GB Non-volatile Flash (applications & storage)

512MB RAMReal Time Clock (RTC) Real Time Clock with rechargeable battery


Supports SNTP network time synchronizationRTC Battery 20 hours charge time, 20 days discharge time

Up to 500 charge / discharge cyclesCryptographic Module FIPS 140-2 Level 1 CompliantCommunications Ports:£ Ethernet 2 switched RJ-45 Ethernet ports

Integrated fail-safe for daisy-chaining In case of power failure to one of the controllers, communication data is still relayed to the

following controller on the daisy-chain£ Supported Protocols BACnet/IP, Modbus TCP, NTP, and REST£ USB Connections 2 × USB 2.0 Ports

1 × Micro-USB 2.0 Port£ RS-485 Serial Communications Screw terminals£ Subnet RJ-45Status Indicators Green LED: Power status, Subnet TX, and Ethernet Traffic

Orange LED: Controller status, Subnet RX, and Ethernet Speed

MechanicalDimensions (H × W × D) 4.74 × 6.78 × 2.31" (120.31 × 172.10 × 58.56 mm)

CO

M

UI4

CO

M

UI6

UI7

UI3

UI5

CO

M

UI2

18V

DC

UI1

CO

M

DEVICE

SECPRI

ETHERNET SWITCH10/100

RS-485

NE

T+

NE

T-

S

POWER

STATUS

TX

RX

O1 O2 O3 O4 O5 O6 O7 O8

I2I1 I3 I4 I5 I6 I7 I8RS-485

HOSTSUBNET

DO

1

C1

DO

2

C2

DO

3

C3

DO

4

C4

DU

O5

C5

DU

O6

C6

UO

7

CO

M

UO

8

OUTPUTS

2x

UI8

UNIVERSAL INPUTS

303

24V

AC

/DC

24V

CO

M

2.65 [67.31]

1.04 [26.51]

5.25 [133.35]

BackFront

0.76

[19.37]

0.76

[19.37]6.78 [172.10]

1.04 [26.51]

4.79 [121.75]

0.06 [1.44]

4.74 [120.31]

2.31 [58.56]

Profile Inches [Millimeters]

Shipping Weight 1.20lbs (0.55 kg)Enclosure Material1 FR/ABSEnclosure Rating Plastic housing, UL94-5VB flammability rating

Plenum rating per UL19951. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste Electrical and Electronic Equipment (WEEE)

directive

EnvironmentalOperating Temperature -40 to 122°F (-40 to 50°C)Storage Temperature -40 to 158°F (-40 to 70°C)Relative Humidity 0 to 90% non-condensingIngress Protection Rating IP20Nema Rating 1


Standards and Regulations (Pending)CE:£ Emission EN61000-6-3: 2007+A1:2011; Generic standards for residential,

commercial and light-industrial environments£ Immunity EN61000-6-1: 2007; Generic standards for residential,

commercial and light-industrial environmentsFCC This device complies with FCC rules part 15, subpart B, class BUL Listed (CDN & US) UL916 Energy management equipment

Specifications - Universal Inputs (UI)GeneralInput Type Universal; software configurableInput Resolution 16-bit analog to digital converterPower Supply Output 18-20VDC; 80mA maximumProtection Auto-reset fuse for 24VAC protection

ContactType Dry contact

CounterType Dry contactMaximum Frequency 1Hz maximum,Minimum Duty Cycle 500milliseconds On / 500milliseconds Off

0 to 10VDCRange 0 to 10VDC (40kΩ input impedance)

0 to 5VDCRange 0 to 5VDC (high input impedance)

0 to 20mARange 0 to 20mA

249Ω external resistor wired in parallel

Resistance/ThermistorRange 0 to 350 KΩSupported Thermistor Types Any that operate in this rangePre-configured Temperature Sensor Types:£ Thermistor 10KΩ Type 2, 3 (10KΩ @ 77ºF; 25ºC)£ Platinum Pt1000 (1KΩ @ 32ºF; 0ºC)£ Nickel RTD Ni1000 (1KΩ @ 32ºF; 0ºC)

RTD Ni1000 (1KΩ @ 69.8ºF; 21ºC)


Specifications - Universal Outputs (UO)GeneralOutput Type Universal; software configurableOutput Resolution 10-bit digital to analog ConverterOutput Protection Built-in snubbing diode to protect against back-EMF,

for example when used with a 12VDC relay Output is internally protected against short circuits

Auto-reset fuse Provides protection from accidental 24VAC connection

0 or 12VDC (On/Off)Range 0 or 12VDCSource Current Maximum 20 mA at 12VDC (minimum resistance 600Ω)

PWMRange Adjustable period from 2 to 65secondsThermal Actuator Management Adjustable warm up and cool down time

FloatingMinimum Pulse On/Off Time 500millisecondsDrive Time Period Adjustable

0 to 10VDCSource:£ Voltage Range 0 to 10VDC linear£ Source Current Maximum 20 mA at 10VDC (minimum resistance 600Ω)Sink:£ Voltage Range 0 to 10VDC linear£ Sink Current Maximum 2.5 mA at 1VDC (minimum resistance 4kΩ)

10 / 10 ECY-303_DS_14_EN

Specifications - Digital Output (DOT)GeneralOutput Type 24VAC Triac; software configurableMaximum Current 0.5A continuous

1A @ 15% duty cycle for a 10 minute periodPower Source External power supply

0 or 24VAC (On/Off)Range 0 or 24VAC

PWMRange Adjustable period from 2 to 65seconds

FloatingMinimum Pulse On/Off Time 500millisecondsDrive Time Period Adjustable

Specifications – Digital-Universal Outputs (DUO)GeneralOutput Type Universal or digital triac;Mode Software configurableSpecifications:£ Universal Output Mode See Universal Output (UO)£ Digital Output Mode See Digital Output (DOT)

Specifications subject to change without notice.Distech Controls, the Distech Controls logo, Innovative Solutions for Greener Buildings, Allure, ECO-Vue, and Open-To-Wireless are trademarks of Distech Controls

Inc.; LonWorks, LON, and LNS are registered trademarks of Echelon Corporation; BACnet is a registered trademark of ASHRAE; BTL is a registered trademark of theBACnet Manufacturers Association; NiagaraAX Framework is a registered trademark of Tridium, Inc.; EnOcean is a registered trademark of EnOcean GmbH.

All other trademarks are property of their respective owners. ©, Distech Controls Inc., 2016. All rights reserved.

eclypse™ connected equipment -...

Documents