ece 442 power electronics1 switching-mode regulators convert an unregulated dc voltage into a...
Post on 21-Dec-2015
224 views
TRANSCRIPT
ECE 442 Power Electronics 1
Switching-Mode Regulators
Convert an unregulated DC voltage into a regulated DC voltage
ECE 442 Power Electronics 2
Buck Regulator
BJT Chopper L-C Filter Load
Control Voltage Freewheeling Diode
Output Voltage is Less Than the Input Voltage
ECE 442 Power Electronics 3
Mode 1 Operation – Q1 switched ON
Input current flows through L, C, and the Load – rises linearly
ECE 442 Power Electronics 4
Mode 2 Operation – Q1 switched OFF
Inductor current continues to flow through L, C, the Load, and Dm, falling linearly until Q1 is turned ON again.
ECE 442 Power Electronics 6
Summary for the Buck Regulator
• The peak-to-peak ripple current is
• The peak-to-peak ripple voltage is
(1 )sV k kI
fL
2
(1 )
8s
c
V k kV
LCf
ECE 442 Power Electronics 7
Summary for continuous current case
• The critical value of the inductor is
• The critical value of the capacitor is
(1 )
2c
k RL L
f
2
1
16c
kC C
Lf
ECE 442 Power Electronics 9
Mode 1 Operation – M1 switched ON
Input current flows through L and M1 (linearly)
ECE 442 Power Electronics 10
Mode 2 Operation – M1 switched OFF
Current that flowed through the transistor now flows through L, C, the Load, and diode Dm until transistor M1 is turned ON again.
ECE 442 Power Electronics 12
Summary for the Boost Regulator
• The peak-to-peak ripple current is
• The peak-to-peak ripple voltage is
sV kIfL
ac
I kV
fC
ECE 442 Power Electronics 13
Summary for continuous current case
• The critical value of the inductor is
• The critical value of the capacitor is
(1 )
2c
k k RL L
f
2c
kC C
fR
ECE 442 Power Electronics 14
Buck-Boost Regulator
The output voltage could be less than or greater than the input voltage
The polarity of the output voltage is opposite to the polarity of the input voltage Vs – Inverting Regulator
ECE 442 Power Electronics 15
Mode 1 Operation – Q1 turned ON
Input current flows through inductor L and Q1 linearly.
ECE 442 Power Electronics 16
Mode 2 Operation – Q1 switched OFF
Current flowing through L now flows through L, C, Dm and the Load.
ECE 442 Power Electronics 18
Summary for the Buck-Boost Regulator
• The peak-to-peak ripple current is
• The peak-to-peak ripple voltage is
sV kIfL
ac
I kV
fC
ECE 442 Power Electronics 19
Summary for continuous current case
• The critical value of the inductor is
• The critical value of the capacitor is
2c
kC
fR
(1 )
2c
k RL L
f
ECE 442 Power Electronics 21
Connect an input filter
Filter out the converter-generated harmonics from the supply line.
ECE 442 Power Electronics 27
Vs110 V
Q1
BJT_NPN_VIRTUAL*
L1681.82uH
L240.91uH
C18.33uF
R12 Ohm
D1DIODE_VIRTUAL
XFG1R2250 Ohm
46
7
8
R31 Ohm
1
5
Vx0 V
3
0
Vy
0 V 11
12
Example 5.10 in MultiSim7