ecc - series electric construction compressors · compressors sullivan-palatek’s electric...

2
FEATURES: ELECTRIC MOTOR 230/460 volt, NEMA T-frame, C-face, TEFC, energy efficient. ELECTRIC Cam-Lok cable connectors. MOTOR STARTER 460 volt, WYE delta starter with 110 volt controls, Nema-4 enclosure, UL, ETL listed and solid state three phase overload relay (50-HP 230/460). PROTECTIVE DEVICES Class 20 solid state overload relay, high air temperature, high pressure shutdown switches and anti-restart pressure switch, preventing starting while air compressor is pressurized. Electric Phase Reversal, Anti-reversing warning light standard. AIR INTAKE FILTER Heavy duty 2-stage CONTROLS Full modulation, solenoid controlled for smooth lowest possible no load power. Automatic start/stop or constant speed. Timed dual control. ACOUSTICAL ENCLOSURE Easy removable panels for faster maintenance and accessibility. SKID MOUNTING Complete fluid containment skid with drains. LIFTING POINT Central located lift bail for ease of loading and unloading. INSTRUMENTATION Line pressure gauge, discharge pressure gauge, hour meter, temperature gauge, lube filter and separator element differential gauges. LUBE FILTER Spin on type mounted strategically for ease of maintenance. COLD WEATHER KIT Sump heater band with heat taped control lines. ECC - SERIES ELECTRIC CONSTRUCTION COMPRESSORS Sullivan-Palatek’s Electric Construction Compressor is an extremely versatile jobsite compressed air source ranging from 50 to 450 HP, providing 200 to 1600 CFM at 150 PSI. Utility companies, paper mills, shipyards, power plants and many other jobsites may have electric power available making these heavy duty air compressors fit the job perfectly. There are many advantages over diesel compressors; they run cleaner, no exhaust, no changing engine oil or refueling. Our Palasyn 45 compressor lubricant is good for 4,000 hours operation. These compressors are designed with full containment frames for sites that require the confidence of “No Spill Zones.” ECC Packages 50HP To 450HP

Upload: others

Post on 12-Aug-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ECC - SERIES ELECTRIC CONSTRUCTION COMPRESSORS · COMPRESSORS Sullivan-Palatek’s Electric Construction Compressor is an extremely versatile jobsite compressed air source ranging

FEATURES:ELECTRIC MOTOR 230/460 volt, NEMA T-frame, C-face, TEFC, energy efficient.

ELECTRIC Cam-Lok cable connectors.

MOTOR STARTER 460 volt, WYE delta starter with 110 volt controls, Nema-4 enclosure, UL, ETL listed and solid state three phase overload relay (50-HP 230/460).

PROTECTIVE DEVICES Class 20 solid state overload relay, high air temperature, high pressure shutdown switches and anti-restart pressure switch, preventing starting while air compressor is pressurized. Electric Phase Reversal, Anti-reversing warning light standard.

AIR INTAKE FILTER Heavy duty 2-stage

CONTROLS Full modulation, solenoid controlled for smooth lowest possible no load power. Automatic start/stop or constant speed. Timed dual control.

ACOUSTICAL ENCLOSURE Easy removable panels for faster maintenance and accessibility.

SKID MOUNTING Complete fluid containment skid with drains.

LIFTING POINT Central located lift bail for ease of loading and unloading.

INSTRUMENTATION Line pressure gauge, discharge pressure gauge, hour meter, temperature gauge, lube filter and separator element differential gauges.

LUBE FILTER Spin on type mounted strategically for ease of maintenance.COLD WEATHER KIT Sump heater band with heat taped control lines.

ECC - SERIESELECTRIC CONSTRUCTION

COMPRESSORS

Sullivan-Palatek’s Electric Construction Compressor is an extremely versatile jobsite compressed air source ranging from 50 to 450 HP, providing 200 to 1600 CFM at 150 PSI. Utility companies, paper mills, shipyards, power plants and many other jobsites may have electric power available making these heavy duty air compressors fit the job perfectly.There are many advantages over diesel compressors; they run cleaner, no exhaust, no changing engine oil or refueling. Our Palasyn 45 compressor lubricant is good for 4,000 hours operation.These compressors are designed with full containment frames for sites that require the confidence of “No Spill Zones.”

ECC Packages 50HP To 450HP

Page 2: ECC - SERIES ELECTRIC CONSTRUCTION COMPRESSORS · COMPRESSORS Sullivan-Palatek’s Electric Construction Compressor is an extremely versatile jobsite compressed air source ranging

1201 W. US Highway 20Michigan City, IN 46360

Tel: 219-874-2497Tel: 800-438-6203

www.sullivanpalatek.comEmail: [email protected]

Distributed By:

ECC FP 6/14 1m

Mike Gonder Director of Sales, Industrial

Melissa Shepherd Inside Compressor Sales, Industrial

Mike KroppDirector, Customer Support

Ph: 219-874-2497 x7016 Ph: 219-874-2497 x7013 Ph: 219-874-2497 x7031 [email protected] [email protected] Cell: 219-682-4440

[email protected]

COMPRESSOR TECHNICAL DATA

MODEL SP50 ECC

SP100ECC

SP200 ECC

SP250ECC

SP300ECC

SP400ECC

SP450ECC

COMPRESSOR DATA 60HzCapacity, ACFM 210 440 750 950 1150 1490 1600

Maximum full load/unload, psig 150 150 150 150 150 150 150

Minimum full load, psig 70 70 70 70 70 70 70

Motor horsepower 50 100 200 250 300 400 450

COOLING DATA, AIR COOLEDFan Horse Power 1 HP 3 HP 5 HP 10 HP 15 HP 15 HP 20 HP

Aftercooler approach degree F 12 10 15 15 10 10 10

Fluid capacity 5 GAL 10 GAL 25 GAL 25 GAL 25 GAL 45 GAL 45 GAL

DISCHARGE PIPING, NPT FEMALEAir cooled, base mounted 1-1/4” 2” 3” 3” 3” 3” 3”

ELECTRICAL DATACompressor Motor, FLA @460V 58 129 240 288 335 480 523

Compressor Motor, FLA @ 230V 116 N/A N/A N/A N/A N/A N/A

Type Wye Delta Wye Delta Wye Delta Wye Delta Solid State Solid State Solid State

Min Breaker Requirements 125 200 400 600 800 800 800

DIMENSIONSLength (inches) 87 92 127 127 127 161 161

Width (inches) 35 45 71 71 71 87 87

Height (inches) 51 78 96 96 96 105 105

Weights (estimated in pounds) 2700 3960 7600 7900 8500 14500 15750

TECHNICAL FEATURES

ECC compressors all have built in aftercoolers, TEFC electric energy efficient motors, wye Delta soft starting, Cam-Lok cable connectors, phase reversal protection, power failure auto restart, warning lights and analogue gauges, plus all the standard emergency shutdown systems including high compressor discharge temperature, high air temperature, anti-restart, high pressure shutdown and solid state overload relays. Heavy duty center mounted lift bales and fork pockets with reinforced frames for maneuverability, placement, and loading and unloading. (SP32 supplied with 4 foot lift bale.)

Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased.