www.tacmina.com

Agitators

Extensive Applications

TACMINA Agitators for All Agitation and Mixing NeedsManufacturing processes not only in the food and chemical industries but also in all sectors of industry are diversifying. Agitators are now required to immediately meet varying on-site conditions. TACMINA's range of agitators has been further enhanced to cover agitation of liquids, slurry, kneaders, static mixers, and other related equipment.Select the ideal model to suit your on-side requirements as if you are ordering a custom-made machine.

1

TACMINA Agitators for All Agitation and Mixing Needs

Chemical industryUniform mixing of various raw materials, suspension, reaction, melting, promotion of heat transfer, dispersion, various chemical plants, etc. (soap, paint, etc.)

Food industryHigh-precision mixing of raw food materials, suspension melting, heat transfer, etc.(sugar, alcohol, tempura coating, etc.)

Chemical industryHigh-precision mixing of raw chemical materials, suspension melting, heat transfer, etc.

Petrol industryBlending, gas absorption, reaction, extraction, suspension of sludge, etc. (petrol, gasoline, refining, etc.)

Papermaking industryUnform agitation of chest and black liquor, etc.

Fermenting industryAeration, promotion of fermentation, mixing of solutions, etc.

Fat industryHeating, mixing, extraction, reaction, storage, etc.

Rubber industrySuspension polymerization, extraction, melting of rubber, etc.

Textile industryHigh-viscosity polymer mixing, melting of dye, mixing of glue materials, etc.

Coal relatedSlurrification, COM adjustment, prevention of COM precipitation, gasification adjustment tanks, etc.

Water treatmentWaste water treatment, surface aeration, chemical adjustment, waste liquid treatment, etc.

Prevention of air pollution

Exhaust-gas desulfurization (plaster slurry tank), etc.

Model Code

M T O 0.1 1 S31 2 4

1 2 3 54 6

6

Models Suited to Specific On-site Needs

Vertical Agitators

Portable Agitators

Horizontal Agitators

5

Select from three types - vertical, portable, horizontal - to suit pre- and post-manufacturing processes and on-site conditions.

2

These agitators are fixed at the top part of tanks, and their shafts are inserted vertically for use. Two features of these agitators is a long service life and little vibration.

Compact and lightweight, these highly portable agitators can be easily attached onto or removed from the top edge of tanks or support bases.

These agitators are mounted directly onto the side wall of tanks, and are used for large-capacity tanks or deep liquid tanks, or when there are height or other restrictions.

Variable Speed Model (custom order)

Liquid contact materials1: SUS3042: SUS3163: Rubber lining4: PE lining5: PVC lining

For medium speeds(gear reducer type)

GT

For medium/low speeds(geared motor reducer type)

M T

For medium/low speeds(cycloid reducer type)C1T (for processes)

For medium/low speeds(cycloid reducer type)

C2T (for water treatment and general use)

For medium speeds(belt reducer type)

BT

Belt reducertype

Agitators for bottom surfaces can also be controlled.

Ring cone reducer type

Cycloid reducertype

For medium/low speeds(geared motor reducer type)

M S

For medium speeds (belt reducer type)BL

For medium speeds(gear reducer type)

GS

Transmission methodG: Gear reducerM *: Geared motor reducer typeB: Belt reducer typeC1: Cycloid reducer type

(for processes)C2: Cycloid reducer type

(water treatment, general purpose)

TypeS: Portable

typeT: Vertical

typeL: Horizontal

type

Shaft seal methodO: OpenP: Sealed (gland

packing seal)* Mechanical seals,

vapor seals, and water seals can be produced.

Motor output (kW)Single-phase motors are appended with "A".(Example: 0.1 A)

OthersS: StandardX: Special

• 6-pole motor• Other special

specifications

* Gear ratio is indicatedin only in the caseof transmissionmethod M.M10 : 1/10 M30 : 1/30M15 : 1/15 M50 : 1/50M20 : 1/20CS8 : 1/8 CS15: 1/15CS11: 1/11

Gland packing seal

Agitation

Agitation

Agitation

Agitation

{ {

Low liquid viscosity High liquid viscosityOutput

kW15117.55.5

3.7

2.21.5

0.75

0.4

0.2

0.10.1 0.2 0.3 0.5 1 2 3 5 10 20 30 50 70 100

Agitated liquid volume m3 Agitated liquid volume m3

OutputkW

1511

7.55.5

3.7

2.21.5

0.75

0.4

0.2

0.10.1 0.2 0.3 0.5 1 2 3 5 10 20 30 50 70 100

3.7

2.21.5

0.75

0.4

0.2

0.1

A

B

C

Strongagitation

Mediumagitation

Weakagitation

Strongagitation

Mediumagitation

100 to 1000 mP•a

Weakagitation

1000 to 3000 mP•a

3

Agitation Force

Motor Drive

Shaft Seal Unit

Agitation Force

Tank bottom bearings are also available

Foot bearing Simple type

Model Selection

Strong Medium Weak

This area is a special agitation area. For details, contact your dealer.

0.1 0.2 0.3 0.5 1 2 3 5 10 20

How to interpret selection chartsFind the agitated volume on the horizontal axis, and read the required motor output on the vertical axis inside the agitation strength range on the line extending upwards from the horizontal axis.

(Example) When agitating non-viscous liquid of volume 3m3, (A) is strong agitation range, (B) the medium agitation range, and (C) the weak agitation range.

Open (standard)

Sealed (gland packing seal)100˚C, 0.1 MPa or less* At 100˚C or higher, a water jacket is provided.

(custom order product)

Special (mechanical seal)Simple mechanical seal250˚C, F.V to ATMDouble mechanical seal250˚C, 0.8 to 2 MPa or lessDry mechanical seal150˚C, 0.2 MPa or less

* Vapor seals and water seals can also be produced.100˚C, 1 kPa or less(External intrusion of dust and vapor from the tank at low temperatures and pressures can be prevented.)

Mechanical seal

Vapor (oil) seal

When selecting the type of agitator and motor drive, it is important that you fully understand specifications and operating conditions.

Your dealer will select the ideal agitator model matched to your particular requirements for you. Check each of the following items, fill in the table on the rear of this catalog, and inform your dealer of this information.

Check your particular agitation requirements and physical conditions of the liquid you are going to agitate before checking the agitation force.

Confirm that the motor drive matches the volume of liquid.

Select a seal unit that matches the operating conditions. For horizontal agitators, select the gland packing seal or mechanical seal.

• Uniform mixing and agitation of high-viscosity liquids

• Uniform mixing of insoluble liquids having different phases

• Agitation such as mixing, dispersion and melting of liquids containing high-viscosity liquids, high specific gravity liquids and solid particles having a large grain size

• Gas absorption/reaction/culture agitation of medium- to high-viscosity liquids

• Uniform heating of high-viscosity liquids inside tanks

• When fast agitation of medium- to low-viscosity liquids

• Short-term agitation of soluble liquids

• Mixtures of medium- to high-viscosity liquids that may be agitated gently

• Agitation such as mixing, dispersion and melting of solid particlesParticle true specific gravity:

2.3 or lessParticle grain size:

200 mesh or lessParticle concentration:

10 to 20 wt% or less

• Gas absorption/reaction/culture agitation of low-viscosity liquids

• Uniform heating of medium- to low-viscosity liquids inside tanks

• Gentle agitation of low-viscosity soluble liquids

• Storage tank for low-viscosity products

• Prevention of precipitation of solid particlesParticle true specific gravity:

2.3Particle grain size:

200 mesh (74μm)Particle concentration:

10 wt% or less

• Simple temperature regulation, etc.

• In the case of soluble liquid-liquid agitation• Specific gravity range of liquid is 1.0 to 1.05.

• When the weak agitation range is for gentle agitation.• Agitation time set between 15 to 25 minutes• Cylindrical agitation tank with tank diameter (D)/height (H) ratio (H/D)

within range 0.8 to 1.1

3-vane propellerStandard Specifications

Special Specifications

Paddles

Stabilizer

Spiral ribbon

Gate type

Anchor

Gate type vane(bobbin vane)

3-vane propeller(standard)

Paddle (4-45˚ paddle)

Paddle (2-45˚ paddle)

Stabilizer ring

Spiral ribbon

Anchor paddle

0 20 40 60 80 100 500 1000 1500Revolution speed (rpm)

Vane shape

Vane dia.Tank dia. >0.5 0.3 to 0.5 <0.3

Disk turbine

T-3A-4-vane paddle

2-vane paddle

Anchor spiral ribbon

Propeller

4

3-vane propeller

3-vane propeller(Marine type)

Marine typeThis 3-dimensionally twisted propeller is extremely efficient. It is used mostly in the 200 to 350 rpm medium rotation speed range.

This axial flow propeller is the most widely used to obtain a large circulation volume.

Disk turbine

Disk turbine(6-45˚ disk turbine)

6-45˚ disk turbineAxial flow, radial flow and shearing flow that are used for every kind of application is uniformly obtained by this turbine. The disk turbine is ideal for high-viscosity (5000 to 20000 mPa•s) liquid-liquid agitation and high concentration solid-liquid agitation.

4-45˚ paddleThis paddle produces a high agitation effect flow by the combined action of radial flow and axial flow. It is ideal for agitation of large volumes of comparatively high-viscosity liquids, (500 to 20000mpA•s) liquids at slow speeds, and is used at rotation speeds of vane outer peripheral speeds of 3m/sec or less.

2-45˚ paddleThis paddle is used for the same applications as the 4-45˚ paddle except that it is used for bringing the effect of agitation closer to the inner wall of the tank depending on the characteristics of the liquid.

This horse show shaped vane matches the surface of tank bottoms. It can also be made to user specifications for special applications.

This is used for slow agitation in large tanks.

Stabilizer ringThis is particularly effective for preventing vibration of the mounting agitation shaft when a longer than standard agitation shaft is required and agitation down to the bottom of the tank is required.

The inner screw stirs the liquid upwards while the outer ribbon pushed the liquid down to screw a powerful vertical circulatory flow. The spiral ribbon is used for mixing of high-viscosity liquids, melting, and heat transfer.

Impeller

4-45˚ paddle

Flow patterns

T-3A impeller

T-3A

T-3AThis propeller can be substituted for almost all 4-45˚ paddles. The same performance can be achieved by half the motor power. T-3A generates a more powerful axial flow than the 4-45˚ paddle, and does not allow dead space even at large bottom clearances.

Selection of the optimum impeller shape is vital. (Your dealer will select the impeller matched to your specifications.)

Vertical type

5

M T

GTO

BTO

For medium speeds (gear reducer type)As this vertical agitator is a high-precision gear unit, it emits little sound during operation, is compact, and demonstrates high performance.

For medium/low speeds (geared motor reducer type)This model emits little sound during operation as it is a high-precision gear unit. The desired revolution speed can also be selected according to applications such as the agitation of viscous liquids.

For medium speeds (belt reducer type)As this compact and easy-to-maintain model is designed in a simple mechanism, it will hardly malfunction, and will emit little sound during operation. At motor drives of 5.5 kW or more, shaft diameter, length and other mechanical parts can be set to match the operating environment.

D

H

1 to

2d

1 to

2d

1 to

2d

1 to 1.5d

(0.2 to 0.25D)

d

D

H

1 to

2d

1 to

2d

1 to

2d

0.08D to 0.1D

Baffle plates 3 or 4 locations

L

d

D

H

1 to

2d

1 to

2d

1 to

2d

1 to 1.5d

(0.2 to 0.25D)

Corner0.07 to 0.1D

d

GTO

M T

BTO

Mounting procedure for vertical agitators

In this example, the agitator is mounted eccentrically in the tank to obtain vertical convection and turbulence in the direction of axial flow.

In this example, the agitator is mounted at the center of the tank, and baffle plates are attached on the inner wall of the tank to create vertical convection and turbulence.

In this example, the agitator is mounted eccentrically in a flat bottom tank. Corners are provided at the bottom of the tank to prevent settling and retention when there is a particularly large difference in specific gravities in melting slurry, mixing, and liquid-liquid agitation.

＊ In case of propeller

6

External Dimensions

External Dimensions

External Dimensions Specification Dimensions

ModelMotorOutput

Max. Agitation CapacityDilutedLiquids

MediumViscosity Liquid

Approx. Weight

W/ motor

０.１０.２０.４０.７５１.５２.２３.７５.５７.５

８００１０００１２００１４００１６００１８００

２４kW

Main BodyStandardlength (L)

Dia.(Dia. D)

mm mm mm mm mm

Agitation Shaft

２５０２００

２５

２０００２２００２５００

２２３２３２４０５０５５

１６１３

２２ ３００ ３７３５０ ４６

３０００１００００１５００５０００８００２５００４００１２００

１６０００４００００１２０００３００００８０００２００００５０００１５０００

２００６００

４００ ７４４５０ ８９５００ １３８

２６９ １００A１００A１２５A１２５A１５０A１５０A２００A２５０A２５０A

１５０ ２７０ ２１０ １７５ １９ ４２６９１５０ ２７０ ２１０ １７５ １９ ４３４７１５０ ３６０ ２５０ ２１０ ２３ ４３４７

４３０

１５０ ３６０ ２５０ ２１０ ２３ ４４２８２１０ ４２０ ２８０ ２４０ ２３ ４４２８２１０ ４２０ ２８０ ２４０ ２３ ４５０８２１０ ４７０ ３３０ ２９０ ２３ ４６５８２８５ ５４０ ４００ ３５５ ２５ ６６５８２８５ ５４０ ４００ ３５５ ６

２６３

２００１６０

２５０３００３５０４００４５０５００５５０ ２９０

50Hz 60Hz

RevolutionSpeed (min-1) 1st stage

dia.2nd stage

dia.mm mm

3-vane propeller

L L kg(A) (B)(H)

２９５(4-pole motor)１９０

(6-pole motor)

３５０(4-pole motor)２３０

(6-pole motor)

Mounting FlangeNominal dia.

JIS-10Kmm mm mm PCS

O.D.(OD)

Pitch(PCD)

Hole(Z) (N)

１１１５１８.５

２７００２８００２９００

６０７０８０ ３２０００８００００

２６０００６５０００２００００５００００ ３５２２５０A

３００A３００A

２５６５８３１０ ５７５ ４００ ３５５ ２５ ６９３２３４５ ４４５ ４００ ２５ ８９３２３４５ ４４５ ４００ ２５ ８

５８５６００６５０７００ ６３０

２２３０

３０００３１００

８５９０ ４８０００１２００００

４００００１０００００３５０A３５０A

１０３５ ４９０ ４４５ ２５ ８１０３５ ４９０ ４４５ ２５ ８

８８０７５０８００ ９３０

BTO - 0.1BTO - 0.2BTO - 0.4BTO - 0.75BTO - 1.5BTO - 2.2BTO - 3.7BTO - 5.5BTO - 7.5BTO - 11BTO - 15BTO - 18.5BTO - 22BTO - 30

* Up to 0.75 kW, 1 stage, 3-vane propeller is standard* The shape varies slightly at 5.5 kW or more.

• The 2-stage, 3-vane propeller is optional.• Idling is prohibited.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type.

JIS10K100AJIS10K125AJIS10K150A

α 45˚45˚45˚

E131618

JIS10K200A 45˚ 22JIS10K250A 30˚ 25JIS10K300A 22.5˚ 30JIS10K350A 22.5˚ 30

A B

fOD

fd

fD

Sealed type(gland packing seal)

H

L

E

Mounting seat

N-fZα

PCD

0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameterand propeller diameter dimensions increase by one more rank.

５５０６００６５０７００７５０８００８５０

７２０７２０７８０７８０４３０

Specification Dimensions

ModelMotor

OutputMain Body Max. Agitation Capacity

DilutedLiquids

MediumViscosity Liquid

Approx. Weight

W/ motor

０.０６５０.１０.１０.２０.２０.４０.７５

６００８００８００１０００１０００１２００

kW

Standardlength (L)

Dia.(Dia. D)

mm mm mm mm mm

Agitation Shaft

２００１６０

１４００

１６１６２２２２

１３１３

１３ ２００２５０

４００１２００４００１２００２００６００２００６００

１５００５０００８００２５００

１００４００

２５０３００３５０

３５２ １００A１００A１００A１００A１００A１２５A１２５A

７３ ７０ ２１０ １７５ １９ ４３６７ ７３ ７０ ２１０ １７５ １９ ４３２９ ７３ ７０ ２１０ １７５ １９ ４４０４ ７３ ７０ ２１０ １７５ １９ ４３６３ ７３ ７０ ２１０ １７５ １９ ４４２６ ９８ ９３ ２５０ ２１０ ２３ ４４２８ ９８ ９３ ２５０ ２１０ ２３ ４

１６０１２０

１６０２００２００２５０３００

50Hz 60Hz

RevolutionSpeed (min-1) 1st stage

dia2nd stage

dia.mm mm

3-vane propeller

L L kg(A) (B)(H)

295(4-pole motor)

190(6-pole motor)

350(4-pole motor)

230(6-pole motor)

Mounting FlangeNominal dia.

JIS-10Kmm mm mm PCS

O.D.(OD)

Pitch(PCD)

Hole(Z) (N)

0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameter andpropeller diameter dimensions increase by one more rank.

* Dimension H varies slightly according to motor manufacturer.

• The 2-stage, 3-vane propeller is optional.• Idling is prohibited.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type. However, the single phase motor 0.065A and 0.1A is the

totally enclosed indoor type, and 0.2A is the totally enclosed fan cooled indoor type.

３.７５.５７.５

２０００２２００２５００

４０５０５５ １６０００４００００

１２０００３００００８０００２００００５００

５５０２００A２５０A２５０A

８５６１６５ １３７ ３３０ ２９０ ２３ ４１０１０２０５ １７３ ４００ ３５５ ２５ ６１０４８２０５ １７３ ４００ ３５５ ２５ ６６００

４５０５００５５０

GTO-0.065AGTO-0.1AGTO-0.1GTO-0.2AGTO-0.2GTO-0.4GTO-0.75GTO-3.7GTO-5.5GTO-7.5

A B

Mounting seatfOD

fd

fD

Sealed type(gland packing seal)

N-fZα

H

L

E

PCD

JIS10K100AJIS10K125AJIS10K150AJIS10K200A

α 45˚

45˚JIS10K250A 30˚

45˚45˚

E13

2225

1618

１６１８１７２０１９３０３７１３２２６５２９５

Specification Dimensions

ModelMotor/Gear ReducerOutput

Mounting FlangeNominal dia.

JIS-10K

Max. Agitation CapacityDilutedLiquids

MediumViscosity Liquid

Approx. Weight

W/ motor

０.１

• Contact your dealer when idling may occur.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type. However, the single phase motor

0.1A is the totally enclosed indoor type, and 0.2A is the totally enclosed fan cooled indoor type.

１／１０ ２００kW

Gear Ratioi

Standardlength (L)

Dia.(Dia. D)

mm mm mm mm mm

Agitation Shaft Main Body

１５０ １８０１／１５ ２５０ １００ １２０ １／２０

１０００ １６

３００

４ １００A ２１０ １７５ １９

７５ ９０ １／３０ ３５０

３００ ７００

５０ ６０ １／５０ ５００ ３０ ３６ １／１０ ２００ １５０ １８０ １／１５ ２５０ １６９ １００ １２０ １／２０ ３００ ４６８ ２９９

４１０ ２４１

７５ ９０ １／３０ ３５０ ５０ ６０ １／５０ ５００ ３０ ３６

０.２

１／１０ ２５０ １５０ １８０ １／１５ ３００ １００ １２０ １／２０

１２００ ２２

１２００ ２２

３５０

４ １２５A ２５０ ２１０ ２３

７５ ９０ １／３０ ４５０ ５０ ６０ １／５０

１０００ １６

５５０

４ １００A ２１０ １７５ １９

３０ ３６ １／１０ ２５０ １５０ １８０ １／１５ ３００ ５０２ ３３３ １６９

４８０

４５１ ２８２

２９６ １８４

１００ １２０

０.４

１／２０ ３５０

１２００ ２５００

６００ １３００

７５ ９０ １／３０ ４５０

４ １２５A１８４ ２５０ ２１０ ２３

５０ ６０ １／５０ ５５０ ３０ ３６ １／１０ ３５０ １５０ １８０

０.７５

１／１５ ４００ １００ １２０ １／２０ ４５０ ７５ ９０ １／３０ ５５０

４ １５０A ２８０ ２４０ ２３

５０ ６０ １／５０ ６５０ ６１８ ３８７

５５８ ３７４

５３１ ３４７

６２４ ３９３ ２５００ ５０００

３０ ３６ １／１０ ４００ ２３１ １５０ １８０ １／１５ ５００

３２ １５００ １００ １２０

１／２０ ６００ ７５ ９０

５０Hz ６０Hz

Revolution Speed (min-1)

Dia. (Dia. D)mm mm mm mm PCS

2-vane Paddle2-stage O.D.

(OD)Pitch(PCD)

Hole(Z) (N)

L L kg

M□T□ - 0.1A

M□T□ - 0.2A

M□T□ - 0.4

M□T□ - 0.1

M□T□ - 0.2

M□T□ - 0.75

(H) (A) (B)

A

B

fODfd

fD

Sealed type(gland packing seal)

H

L

E

Mounting seat

N-fZα

PCD

JIS10K100AJIS10K125AJIS10K150A

α 45˚45˚45˚

E131618

* Can be made up to 0.75 kW1/20.* Dimensions H and A vary slightly according

to motor manufacturer.* Paddle, 3-vane propeller and turbine

impellers are also available.* Agitators having a gear ratio other than the

above are also available.

１８１８ １８ １９ ２０ ２１ ２１ ２２ ２２ ２４ １９ １９ ２０ ２７ ２９ ２２ ２２ ２３ ３０ ３２ ３３ ３３ ３３ ５１ ５３ ５４ ５６ ５７

7

Vertical typeC1T

C1T

For medium/low speeds (cycloid reducer type)(for processes)

This model has been designed to be rigid for use in processes. Select the model to suit your particular requirements. A high-precision cyclo, Bayel-Cyclo, ring cone, and other adjustable speed reducers can also be mounted. A mechanical seal type is also

available.

α JIS 10K 100AJIS 10K 125AJIS 10K 150AJIS 10K 200A

45˚

45˚JIS 10K 250A 30˚JIS 10K 300A 22.5˚JIS 10K 350A 22.5˚JIS 10K 450A 18˚JIS 10K 550A 18˚

45˚45˚

MountingFlange

Body Related DimensionsMotorkW

Mecha-type

α

10K100A

10K125A10K250A

10K300A

10K350A

10K450A

10K550A

10K150A

10K200A

10K250A

10K250A

MountingFlange

Body Related DimensionsMotorkW

External Dimensions

Rotational speed min-1

Open typeSealed type (gland packing seal)Special (vapor seal type)

Special (mechanical seal)

Reduction ratio

Mounting seat Mounting seat

Sealed type (gland packing seal)

JIS 10K 250AJIS 10K 300AJIS 10K 350AJIS 10K 450A

0˚

0˚

11.25˚11.25˚

Body Dimensions

8

Model

Motor

Output

Mounting Flange

Nominal dia.JIS-10K

Max. Agitation Capacity

DilutedLiquids

MediumViscosity Liquid

Approx. Weight

W/ motor

kW HP

Gear Ratio

i

GearReducer

Standard length(L)

Dia.(Dia. D)

mm mm mm mm mm mm

Agitation Shaft2-vane paddle

2 stagesDiameter(dia.D)

PCS

O.D.(OD)

Pitch(PCD)

Hole(Z) (N2)

PCS(N1)

L L kg

Horsepower

Specification Dimensions

• Contact your dealer when idling may occur.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SUS316. 　 Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type.

• The agitation shaft can also be made to custom lengths. Consult your dealer.• Agitation shafts of diameter 45 or less are sleeve insertion types.• Gear ratios other than those indicated are also available.

275295310385154158305310340370625295300335380525605725310335380535595680

1100345385595640690

10801510595600710755

103515151680735765

11701630

8285858889

1292858688

130144144295310128130150

2626272727418127284242478286474782838289

137

C1T□-0.1

C1T□-0.2

C1T□-0.4

C1T□-0.75

C1T□-1.5

C1T□-2.2

C1T□-3.7

C1T□-5.5

C1T□-7.5

C1T□-11

C1T□-15

C1T□-22

9

Vertical typeC2T

External Dimensions

For medium/low speeds (cycloid reducer type)(for water treatment and general use)

This model is designed to have highly applicable functions. Select the model to suit your particular requirements. A high-precision cyclo, Bayel-Cyclo and other adjustable speed reducers can also be mounted.

C2T

Mounting seat

Sealed type (gland packing seal)

JIS 10K 100A

JIS 10K 125A

JIS 10K 150A

JIS 10K 200A

45˚

45˚

45˚

45˚

13

16

18

22

α E

10

Model

Motor

Output

Mounting Flange

Nominal dia.JIS-10K

Max. Agitation Capacity

Approx. Weight

kWL HP 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz

Frame No. Gear Ratio Standard length(L)

Dia.(Dia. D)

mmmm mm mm mm

AH B (Z) (N)

mm mm mm mm mm kg

Agitation Shaft

Diameter(dia.D)

PCS

O.D.(OD)

Pitch(PCD)

Hole

Horse-power

Vane (4-vane paddle 2 stages)Cycloid reducer

Inter-vane(Ld)

Revolution Speed (min-1)

Main Body

Body Dimensions

• Contact your dealer when idling may occur.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type.

C2T□-0.1

C2T□-0.2

C2T□-0.2

C2T□-0.4

C2T□-0.2

C2T□-0.4

C2T□-0.2

C2T□-0.4

C2T□-0.75

C2T□-0.4

C2T□-0.75

C2T□-1.5

C2T□-0.4

C2T□-0.75

C2T□-1.5

C2T□-0.75

C2T□-1.5

C2T□-0.75

C2T□-1.5

C2T□-2.2

Portable Type

Horizontal Type

11

For medium/low speeds(geared motor reducer type)This model emits little sound during operation as it is a high-precision gear unit. The desired revolution speed can also be selected according to applications such as the agitation of viscous liquids. This handy multi-type model can also be used as a vertical type (MT model) if the clamp is removed and a flange is attached.

Mounting procedure for horizontal type agitators

GS

M S

BL

Mounting procedure for portable agitators

d

1 to

2d

1 to

2d

1 to

2d

1 to

2dd

5 to 20˚

0 to 20˚

0 to 20˚

In the case of flat tank having a large diameter or a tank of depth shallower than the tank diameter

When two or more agitators are mounted in a single tank, flow becomes the compound flow of the flows dependent on each agitator.

In the case of a tank having a small diameter and a depth larger than the tank diameter

Shaft Seal UnitGland packing seal systemThis general seal system for side-entering mixers is simply structured and can be easily replaced. This system, however, must be tightened periodically as a perfect seal is difficult to achieve. When the agitator is used for hot liquids, mount a cooling jacket to cool the gland packing.

Mechanical seal systemUse this seal system when a higher grade seal is required. Adjustment of this system is not necessary unlike the gland packing seal system which requires periodic tightening. An even higher grade seal can be achieved if a double mechanical seal system is used for liquids that contain slurry.Tilted insertion method (angled from tank

center)

d

1 to

2d

0.5dor more

10 to 15˚

10 to 15˚

H

10 to

15˚

10 to

15˚

H/6

to H

/4

30 to 0˚

D or more

H

45˚

The agitator is clamped to the support base or top edge of the tank. Though the shaft is mounted at an angle with respect to the horizontal and vertical directions, it should be fixed so that its vanes do not exceed beyond the center of the tank. When there is piping in the tank, the agitator must be mounted so that the vanes are positioned at the center of the tank. Also, mount so that the top and bottom propellers become multiples of the number of vanes.

GS

M S

BL

External Dimensions

For medium speeds (gear reducer type)As this portable agitator is a high-precision gear unit, it emits little sound during operation, is compact, and demonstrates high performance. This handy multi-type model can also be used as a vertical type (GT model) if the clamp is removed and a flange is attached.

For medium speeds (belt reducer type)

Features1. V-belt drive results in low noise and little

vibration.2. Small drive power can also be applied to

agitation of large volumes. Considerable agitation effect and economical

3. Outstanding gland seal minimizes leaks. Models using mechanical seal systems are also available for pressure- and corrosion-resistant applications.

JIS10K100AJIS10K125AJIS10K150A

α22.5˚22.5˚22.5˚

E212426

JIS10K200A 22.5˚ 30JIS10K250A 0˚ 37JIS10K300A 11.25˚ 42JIS10K350A 11.25˚ 51

φD

φd

H L

E

G

A

F

B

Body mounting seat

N-φZα

PCD

BLP 0.1~BLP 3.7

External Dimensions

External Dimensions

12

F

Specification Dimensions0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameter andpropeller diameter specifications increase by one more rank.

ModelMotor

OutputPart Dimensions Max. Agitation Capacity

DilutedLiquids

MediumViscosity Liquid

Approx. Weight

W/ motor

０.０６５

• The 2-stage, 3-vane propeller is optional.• Idling is prohibited.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SSU316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type. However, the single phase motor 0.065A and 0.1A is the totally enclosed indoor type, and 0.2A is the totally enclosed fan cooled indoor type.

０.１ ０.１ ０.２ ０.２ ０.４ ０.７５

１００ ６００ ８００ ８００ １０００ １０００ １２００

kWVoltage

V

Standardlength (L)

Dia.(Dia. D)

mm mm mm mm mm

Agitation Shaft

１００ ２００ １６０

２００

１４００

１６ １６ ２２ ２２

１３ １３

１３ ２００ １００ ２５０

４００ １２００ ４００ １２００ ２００ ６００ ２００ ６００

１５００ ５０００ ８００ ２５００

１００ ４００

２００ ２５０ ２００ ３００ ２００ ３５０

３２５ １２７ ５０ -４ １０１ ３８ ４７ ３４０ １２７ ５０ -４ １０１ ３８ ４７ ３０２ １２７ ５０ -４ １０１ ３８ ４７ ３７７ １２７ ５０ -４ １０１ ３８ ４７ ３３６ １２７ ５０ -４ １０１ ３８ ４７ ３９９ １６８ ５０ ２３ １２８ ３８ ４７ ４０１ １６８ ５０ ２３ １２８ ３８ ４７

１６０ １２０

１６０ ２００ ２００ ２５０ ３００

５０Hz ６０Hz

RevolutionSpeed (min-1) 1st stage

dia2nd stage

dia.mm mm mm mm mm mm

3-vane propeller

L L kgGS - 0.065AGS - 0.1AGS - 0.1GS - 0.2AGS - 0.2GS - 0.4GS - 0.75

(A) (B) (C) (H) (I) (E) (U)

２９５ (4-pole motor)１９０

(6-pole motor)

３５０(4-pole motor)２３０

(6-pole motor)

１３ １５ １４ １７ １６ ２２ ２９

* The 1-stage, 3-vane propeller is standard.* Dimension A varies slightly accordingly to motor manufacturer.

U

U

GS2.2

A

B

EI

C

φd

φD

H

When outdoor coveris attached

L

ModelMotor/Gear ReducerOutput

Part Dimensions Max. Agitation CapacityDilutedLiquids

MediumViscosity Liquid

Approx. Weight

W/ motor

• Contact your dealer when idling may occur.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SSU316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type. However, the single phase motor 0.1A is the totally

enclosed indoor type, and 0.2A is the totally enclosed fan cooled indoor type.

０.１

０.２

０.４

０.７５

１／１０

１０００

kWGear ratio

i

Standardlength (L)

Dia.(Dia. D)

mm mm mm mm mm

Agitation Shaft

１／１５ １／２０ １／３０ １／５０ １／１０ １／１５ １／２０ １／３０ １／５０ １／１０ １／１５ １／２０ １／３０ １／５０ １／１０ １／１５ １／２０ １／３０ １／５０ １／１０ １／１５ １／２０ １／３０ １／５０ １／１０ １／１５ １／２０

１６

１０００ １６

１２００ ２２

１２００ ２２

１５００ ３２

３００ ７００

６００ １３００

１２００ ２５００

２５００ ５０００

３８３

４４１ １４２ ５０ ２５ ９８ ３８ ４７

１４２ ５０ ２５ ９８ ３８ ４７

１５７ ７４ １４ １１２ ６６ ７２

１５７ ７４ １４ １１２ ６６ ７２

１８７ ７４ ４３ １２３ ６６ １４４

４２４

４５３

５３１

５７４

５８０

４７５

５０４

２５０ ２００１５０ １８０

１００ １２０ ７５ ９０ ５０ ６０ ３０ ３６ １５０ １８０ １００ １２０ ７５ ９０ ５０ ６０ ３０ ３６ １５０ １８０ １００ １２０ ７５ ９０ ５０ ６０ ３０ ３６ １５０ １８０ １００ １２０ ７５ ９０ ５０ ６０ ３０ ３６ １５０ １８０ １００ １２０ ７５ ９０

１５０ １８０ １００ １２０ ７５ ９０

５０ ６０ ３０ ３６

３００ ３５０ ５００

５００

２００ ２５０

２５０

３００ ３５０

２５０ ３００ ３５０

３５０ ４００

４００ ５００ ６００

３００ ３５０ ４５０ ５５０

４５０

４５０

５５０

５５０ ６５０

50Hz 60Hz

RevolutionSpeed (min-1)

Diameter (dia.D)mm mm mm mm mm

2-vane paddle2 stages

L L kg

M□S - 0.1A

M□S - 0.1

M□S - 0.2A

M□S - 0.2

M□S - 0.4

M□S - 0.75

(A) (B) (C) (H) (I) (E) (U)

Specification Dimensions

１５１５ １５ １６ １７ １８ １８ １８ １９ ２０ １６ １６ １７ ２２ ２４ １９ １９ ２０ ２５ ２７ ２７ ２７ ２７ ４４ ４５ ４６ ４８ ４９

* Can be made up to 0.75 kW1/20.* Dimension A varies slightly according to motor

manufacturer.* Paddle, 3-vane propeller and turbine impellers

are also available.* Agitators having a gear ratio other than the

above are also available.

U

U

MS0.4: and onlyMS0.75: all models

301／ 50

1／

A

B

E

I

C

φd

φD

H

L

Leg mounting seat

n-φS

PCD

φD

φd

H L

E

G

A

F

B

BLP 5.5~BLP 22

Specification Dimensions

ModelMotorOutput

Main Body Max. Agitation Capacity

DilutedLiquids

MediumViscosity Liquid

Approx. Weight

W/ motor

０.１

• Idling is prohibited.• The standard paint color is Munsell 10GY-6/6.• The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials.• The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type.

0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameterand propeller diameter dimensions increase by one more rank. (Dimensions in this table are for a gland packing seal type.)

０.２ ０.４ ０.７５ １.５ ２.２ ３.７ ５.５ ７.５ １１ １５ １８.５ ２２

２５０ ３００ ３５０ ４００ ４５０ ５００

kW

Standardlength (L)

Dia.D

mm mm mm mm

Agitation Shaft

２００ １６０

５５０ ６５０ ７００

２５０ ３００

３３００ １００００ １６００

１０００ １０００ １２００ １２００ １２００ １５００ １５００ １５００

５０００ ８００ ２５００ ４００ １３００

１６０００ ５００００ １２０００

３３０００ ２５０００

６６０００ ４１０００

３７０００ ８０００ ２５０００ ５０００ １５０００

１５００００ １２５０００ １０００００ ７５０００

２００ ６００

３５０ ４００ ４５０ ５００

１５０ １００A１００A１２５A１２５A１５０A１５０A２００A２５０A２５０A

２７０ ２１０ １７５ １９ ８ １５０ ２７０ ２１０ １７５ １９ ８ １５０ ３６０ ２５０ ２１０ ２３ ８ １５０ ３６０ ２５０ ２１０ ２３ ８ ２１０ ４２０ ２８０ ２４０ ２３ ８ ２１０ ４２０ ２８０ ２４０ ２３ ８ ２１０ ４７０ ３３０ ２９０ ２３ １２ ２８５ ５４０ ４００ ３５５ ２５ １２ ２８５ ５４０ ４００ ３５５

３５５ ４００ ４４５ ４４５

１２０ １５０ １８０ １８０ １８０ １８０ ２００ ２００

１５ １５ １９ １９ １９ １９ ２３ ２３

４００ ４４５ ４９０ ４９０

２５ ２５ ２５ ２５ ２５

１２ １２ １６ １６ １６

４ ４ ４ ４ ４ ４ ４ ４

５５０ ７５０ ８００ ８５０ ８５０

６００ ６５０ ６８０

２５０A３００A３５０A３５０A

３１０ ５７５ ３４５ ７１５ ４５０ ８２０ ４５０ ８２０ ７００

50Hz 60Hz

RevolutionSpeed (min-1)

Diametermm mm

3-vanepropeller

L L kgBLP-0.1BLP-0.2BLP-0.4BLP-0.75BLP-1.5BLP-2.2BLP-3.7BLP-5.5BLP-7.5BLP-11BLP-15BLP-18.5BLP-22

(A) (B)(H)

Mounting FlangeNominal dia.

JIS-10Kmm mmmmPCS mmmmmm PCS

O.D.(OD)

Pitch(PCD)

Hole(Z) (N)

Mounting Leg

(F) (G) Pitch(PCD)

Hole(S) (n)

295(4-polemotor)190

(6-polemotor)

350(4-polemotor)230

(6-polemotor)

Not equippedwith mountingleg or turnbuckle

２７ ２８

３０ ４０ ４０ ５５ ６５ ６５

２５ ２５

３０ ４０ ４３ ７９ ９３ １４１

２４０ ２７２ ３５０ ３５０ ３５０ ５６０ ６４０ ６４０

２４８

２７７ ２７７

３４６ ３４６ ４３６ ４３６ ５１６ ６７０ ６７０

６５ ８５ ９５ ９５

６７０ ９４４ １０４８ １０４８

２６１ ３１５ ５４０ ７１５ ７４０

Agitator AppliedDevices

Specification Dimensions

Agitator Mounting Bases

A

B

C

D

H

13

FeaturesIn addition to standalone use, this tank can be used in various combinations for various applications: with a metering pump, with an agitator, or with a metering pump and agitator.An extensive range of range sizes are available: 50, 100, 200, 300, 500 and 1000 liters.

FeaturesCompact. Ideal for small volumesCombining with Solution Tank fully demonstrates performance.

External DimensionsModel H

Standard Dimensions

700 to 1030930 to 1310

1200 to 1650

A

425370

560

PGS-1PGS-2PGS-3

B

400350

470

C

680600

800

D

363313

420

LoadLimits

50 kg30 kg

85 kg880 to 1330950 to 1450

1500 to 2250605475

700

PHS-1PHS-2PHS-3

365340

650515480

1000305290

52550 kg30 kg

75 kg950 to 1430

1070 to 15701500 to 2250

645475

700

PHC-1PHC-2PHC-3

490340

650690480

1000415290

52550 kg30 kg

75 kg* Shapes of bases may vary slightly from the photographs.* Dimensions can be changed by user request.

Base for portable agitatorPGS model

A wide range of stands portable agitators is available. When ordering, notify your dealer of size, base height, stroke and tank size.• Bases with hydraulically driven, motor-

driven or pneumatically driven automatic elevator can also be made.

• For details on cantilever type and gate type elevated bases for vertical agitators, consult with your dealer.

Various lift-basesPHS model

H

C B A

D

PHC model

H

C BA

D

Chemical dissolving tank with metering pump and base for agitator

Solution Tank

Agitator for Solution Tank

Model

１／８

１／１５

１／８

１／１５

１／８

１／１５

１／８

１／１５

１／８

１／１５

１／１１

１／５

２１９

１１７

２１９

１１７

２１９

１１７

２１９

１１７

２１９

１１７

１５９

１１７

CS８TV‐０.０４-１-S

CS１５TV‐０.０４-１-S

CS８TV‐０.０６-１-S

CS１５TV‐０.０６-１-S

CS８TV‐０.０９-１-S

CS１５TV‐０.０９-１-S

CS８TV‐０.１-１-S

CS１５TV‐０.１-１-S

CS８TV‐０.２-１-S

CS１５TV‐０.２-１-S

CS１１TV-０.４

CS１５TV-０.４

JIS５K６５A

JIS５K６５A

JIS５K６５A

JIS１０K６５A

JIS１０K６５A

JIS１０K６５A

４０

６０

９０

１００

２００

０.４

４５０

６００

７００

７００

８００

１２００

２

２

２

２

２

２

１５０

１５０

１８０

２００

２００

３００

２２０

３００

２６０

３８０

３８０

４５０

１３．０

１３．０

１４．０

１４．０

１４．０

１４．０

１６．０

１６．０

１８．０

１８．０

２３.０

２３.０

１６

１６

１６

１６

１６

２２

５０

１００

２００

３００

５００

１０００

１６４

１６４

１６４

１７８

２２０

２４５

７１２

８６２

９６２

９７６

１１１８

１５４３

A

B

C

D

E

１８1

96.7

１８1

96.7

１８1

96.7

１８1

96.7

１８1

96.7

１３２

９６.７

CS

Motor

Output

(W)

Body

Hight (mm)

A

Main Body

Hight (mm)

B

GearReducer

GearRatio

Revolution

speed (rpm)

50 Hz 60 Hz

Agitation Shaft Applicable

Tank

Approx.Weight

Impeller(2-Vane Paddle)

W/ motor

(kg)Nominal Dia.Number(L)

Mounting FlangeDia. (mm)Dia. (mm)Length (mm)

EDC

• Idling is prohibited. • The standard paint color is Munsell 10GY-6/6. • The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials. • The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type.

Metering Pumps

PeripheralDevices Various Devices for Supporting Agitator Applications

Safety Pumps

SP60-P Series

14

Solenoid-Driven Metering Pump PZ series

FeaturesStrong acids and alkalis through to solventsPumps are made in two types of main materials, polypropylene and stainless steel, accommodating a wide range of chemicals.Thermal protectorThe thermal protector prevents motor seizure caused by overloads, eliminating the need for the troublesome replacement of fuses and repair.* Excluding SP40-P and MSP seriesMotor can be selected for pressure-resistant, explosion-proof applications.Flowrate 2-stage selector switchThe discharge volume can be selected by one-touch switch operation.* SP40-P series and SP40-S series

(excluding pressure-resistant, explosion-proof specifications)

Lightweight, compact designLittle residual liquid in containerImpeller has been designed to position as low as possible.

Applications• Transfer and sub-division of

liquids in chemical plants and chemical warehouses

• Hygienic feeding of drinks and brewed liquids in food processing plants

• Transfer and replenishment of chemicals in steelworks, and water and waste water treatment facilities/ water works facilities

• Replenishment of chemicals in laboratories and hospitals

• Transfer of sodium hypochlorite in swimming pools

• Transfer of sodium hypochlorite in simple water works facilities

• Transfer of various industrial waste liquids

MSP SeriesSmall, lightweight type having pump diameter of 32 cm for insertion in oil cans and polyethylene cans

• Reliable metering performance and repeatability at a low price

• Delivers stable discharge volume hardly effected by the discharge-side pressure.

• Capable of microscopic amounts, high-pressure injection.

• Capable of racingProduct variations ranging from 30 mL/min to 43 L/min* in capacity *Per pump head

FeaturesWide voltage range power supply (AC90V to AC264V)Outdoor specificationsEquivalent to IEC specifications; IP95Dust-proof, jet stream-proof structureSimple structureReduced number of parts allows easy maintenance.ON-OFF control is possible by the external operation signal. (Model PZL)Intelligent PZi series models are also available:PZi8: I/O signal control typePZi4: Input signal control type

Specifications and Performance TableSpecification Model

Maximum discharge volume L/H (mL/min)Maximum discharge pressure bar (MPa)Stroke frequency (pulses/min)

Connection PVC braided hoseaperture (mm) PE tubeWeight (kg)

PZ -31 PZ -61 PZ -121.8 (30) 3.6 (60) 6.0 (100)10 (1.0) 8 (0.8) 4 (0.4)Max. 300: Adjustable from 15 to 300

dia.4 x dia.9 dia.6 x dia.11 dia.6 x dia.11dia.6 x dia.9 or 1/4" x 3/8"

1.7 1.7 1.7

Direct-Drive Diaphragm Metering Pump

General-purpose, Fixed Element Type

For reduced maintenance and energy and space savings in mixing processes

General-purpose, Removable Element Type

Sanitary Finishing Type

Corrosion-resistant Ceramic TypeCorrosion-resistant PVC Type

N10 Series N60 Series

N30 Series

N50 Series CSM Series

Both ends of the element are welded to the housing, with six elements provided for a single module as standard. Select the number of modules according your specific requirements. This type is widely used for mixing, dispersion, neutralizing, extraction, and other general applications.

This type is used for the same applications as the N10 series. However, the element is only welded onto a ring so that it can be removed from the housing, making it ideal for processes that require disassembly for cleaning.

This sanitary type conforms to the same standards for sanitary piping used in food processing plants and supports CIP cleaning. The main unit and element can be easily removed and attached, making it ideal for processes that require disassembly for cleaning.

An element made of ceramic treated with special glaze is used. The surface of this element is smooth, making it difficult for scale to adhere and highly resistant to wear. Housings in various materials are also available so that you can select the material best suited to fluid characteristics. This type is used both in water treatment processes and chemical processes.

On this static mixer, all of the element, housing and flange are made of PVC. This type is used in applications where piping leading to and exiting the installation is made of PVC, mainly in drinking water and pure water treatment. This type can also be made in impact-resistant PVC or heat-resistant PVC. It can also be reinforced with an FRP outer sheath.

Specifications

Shape and dimensions

Bottom shapeDimensions

Tank states

Tank

Liq

uid

Ag

itatio

n

Properties

SolidsPowder

Liquid amount

Purpose

Time

Liquid (gas) contact materials

Motor

Square (V x H x H)Round (dia. x H)Base height

Flat bottomMirror bottom

Sealed

OpenPressure

TemperatureIndoor/outdoorLiquid nameViscositySpecific gravity

Liquid temperature

Solid particle nameSolid particle specific gravity

Solid particle diameterSlurry concentration (%)

Spherical bottom

Precipitation speed (mm)Maximum/minimum

Decrease during agitationIdling

Uniform mixingDissolvingPrecipitation prevention

Heat transferReactionDispersionPolymerizationDepositionGas dispersion

OtherBatch type

Continuous access type

Flow speedFlowrateRetention timeSelected materials at liquid contacting parts

Selected materials at gas contacting parts

Power supply (V, Hz)Motor type

Noritake Static Mixers with No Driven Parts

Static mixer and static mixer applied products are developed and manufactured by Noritake Company Limited. TACMINA sells these products on an engineering dealership basis.

Notify us of the following when inquiring about TACMINA agitators.

CAUTION● Do not use agitators that do not conform to

explosion-proof specifications in explosive or flammable atmospheres. Doing so might result in explosion or fire.

● Before stopping agitators for inspection and maintenance, be sure to turn the power OFF. Also, attach the "WORK IN PROGRESS. DO NOT TURN POWER ON" tag on the switch to prevent other personnel from turning the agitator ON by mistake.

● Never perform racing agitators on which racing is prohibited. Also, never perform racing agitators while the liquid level is rising above the vanes. Doing so might damage the agitator.

● Do not use agitators outside of specified product operating ranges. Doing so might result in electric shock.

EC-025 (3) 05

2012/3/ASS