Easiest steps to sharpen Wood Planer Blades

Planer blades of any equipment are prone to wear and tear. With regular usage, the thing that gets maximum wear and tear is obviously the blade of any equipment. These blades needsharpening to increase the productivity and yield. If you are looking for methods, how you can sharpen the wood planer blades, then there is reason for you to be happy. In this article, we will be discussing the easiest steps known to sharpen the planer blades. These steps are so easy that you can perform it yourself using little care and knowledge. The various steps are discussed herein in below:-

Assemble Blade: - You will start the process with assembling the blade. Set the equipment on a plane surface and gently put your blade into the honing guide such that it holds the blade in the bevel side-down position. Then adjust the blade in such a way that bevel connects to the surface.

Oiling: - Using the tapping oil, you should now gently oil the whetstone. The purpose of tapping oil is to clean off the metal. It will make the metal lubricated and ensure its easy sharpening.

Remove Blade Nicks: - There might be blade nicks, which need removal. To remove those, only apply the coarse side of the whetstone. While applying, always perform it in a pushing way as pulling may cause a blade edge inflection.

After when you have removed the blade nicks, gently move the blade across the whetstone by applying force. Care should be taken that the table on which it is placed does not move as imbalance may harm you as well. If there is curved edge on the blade, it will require reshaping again.

Maintenance of blade: - As blades are prone to wear and tear, they require maintenance on regular basis. You need to check frequently that the blades of your wooden equipment are in good condition and are able to produce good yield. If due to any case, you feel they are not sharp as they should be, you must immediately perform the above mentioned procedure to increase the lifespan of the equipment.

Sharpening is a gateway skill to increase the lifespan of all your edge tools. It becomes vital for you to know how to do it correct as little knowledge may prove harmful to you as well as others. Apart from going with expensive sharpening methods, you may also use inexpensive natural methods that are easy and simple to use. It is advisable to take proper care of your cutting edge tools and maintain then well in order to get the fruitful results.