e-15-091-m&m-a.s.-t&c update: 17-08-2015, 05:26...

E-15-091-M&M-A.S.-T&C Update: 17-08-2015, 05:26 PM

12

345

Bidding is on UOM Basis. Taxes & Duties applicable will be charged extra on the bidded rates as mentioned below in the lot details.

Will administer the sale of Arising Scrap, on an "As Is Where Is" basis wet, dry or rusty condition no segregation is allowed. E-Auction will be on the

Participation for Hazardous Waste [Check Category-(2) in lot table]: Parties must have CONSENT OF SPCB & CPCB, AUTHORISED TRANSPORT FOR THEHAZARDOUS WASTE, MEMBER OF CHWTSDF ETC WHERE EVER REQUIRED, as an approval to bid for all Hazardous waste category e.g. Used Oils, Coolants,Solvent/Thinner, Battery & Rest Hazardous waste, Empty Drums/ Barrels/ Tins/ Carbouys/ Buckets/ Totes also require SPCB & CPCB License.IMPORTANT NOTE: FOR ALL THE HAZARDOUS ITEMS, BUYERS ARE REQUIRED TO PROVIDE AUTHORISED TRANSPORTERS VEHICLE AS PER MPCBRULES. THIS IS MANDATORY AND COMPULSORY. WITHOUT AUTHORISED VEHICLE, DELIVERY WILL NOT BE GIVEN. All such party should submitForm 13 to MPCB/SPCB Authority Online which is received from the company. For this they should have registration with MPCB/SPCB.

Points to Note for e-Auctionable Material:Interested Bidders will have to submit their refundable participation fee along with Bidders Agreement dully filled, signed & stamped

Under Instructions of Mahindra & Mahindra Limited, (Automotive Sector), Kandivli (Mumbai), Plant 1 & 2 - Nashik & Igatpuri

E-Auction from 03-09-2015 To 07-09-2015 at 11.00 Hrs. OnwardsLogon: www.krauctioneers.in

All bidders are requested to refer to the final catalogue before bidding available on our website site www.krauctioneers.in before the e-Auction. Contract Validity Period: The contract validity is mentioned in material list.

6

Contact Nos.986759908798677549249423924699

9890454410

Contact Nos.956106381995610704088828288218

FAX No.020-26361359

On 25-08-2015Time: 10:00 a.m. to 04:00 p.m.

KRAuctioneers- Person

Email IDsTelephone Nos.020-26360356,

26361357

E-Auction ScheduleWebsite

Participation Fee Submission Date

Mr. Sunil Khade

On 25-08-2015Time: 10:00 a.m. to 04:00 p.m.

Kisan Ramchandra Auctioneers Pvt. Ltd;Deccan Towers, 5-Mezzanine Floor, Poolgate, Pune- 411001

KRAuctioneers- ADDRESS28-08-2015

on or before 17:00 Hrs.

Nashik

Mahindra & Mahindra Limited,Igatpuri Plant, District-Nashik- 422403

Igatpuri Mr. Anant Gune

Mr. Satish Bakare

Mahindra & Mahindra Limited, Highway Gate, Kandivli (E), Mumbai-400101

q g g

Mr. Suhas BhatMr. Namdev Rawool

Inspection ScheduleKandivli

The contract is basically for specific period and not for quantity. The quantity mentioned here below are approximate. It may increase or decrease depending upon production. All terms and conditions as mentioned in this catalogue will be adhered to and honoured by the winning buyers.

M&M-Contact Person

Inspection and Contact Particulars :

Mr. Vinod Deshpande

3rd To 7th Sept. 2015at 11:00 Hrs. Onwards

On 24-08-2015Time: 10:00 a.m. to 04:00 p.m.

SCHEDULE FOR E-AUCTION Mahindra & Mahindra- ADDRESSM&M-Plants

Mahindra & Mahindra Limited, 89, MIDC, Satpur, Nashik- 422007

www.krauctioneers.in [email protected]; [email protected]

Mr. Prafull Wakode

of 38


1

2

3

4

Kisan Ramchandra Auctioneers Pvt. Ltd. 26/89, 2nd Cross, Ayappa Garden, Adugodi Post Bangalore- 560030Bangalore Branch:Head Office: Kisan Ramchandra Auctioneers Pvt. Ltd. Deccan Towers, 5-Mezzanine Floor, Poolgate, Pune-411001

For e-Auction-Refundable Participation Fee is as under to be paid by by Pay Order/ Demand Draft in the name of 'Mahindra & Mahindra Limited'=> Participation fee for 03-09-2015 Per day Rs. 300000/-=> Participation fee for 04-09-2015 Per day Rs. 300000/-=> Participation fee for 05-09-2015 Per day Rs. 300000/-=> Participation fee for 07-09-2015 Per day Rs. 300000/-=> Participation fee for A single lot Rs. 200000/-=> Participation Fee for Lot No. K-25 & K-26 is Rs. 5,00,000/- Jointly. No single lot partcipation is allowed. [# Please Read Carefully Sperical Terms & Conditions for Lot No. K-25 & K-26.]

If successful bidder failed to deposit the required EMD within the stipulated time then the participation fee paid at the time of registration will be forfeited and “NO

Nagpur Branch: Kisan Ramchandra Auctioneers Pvt. Ltd. Ravishekhar Picture, Vali Building, Opp. Sitabuldi Police Station, Sitabuldi, Nagpur

A) Payment Method for Refundable Participation Fee: Payment is to be made by Pay Order/ Demand Draft in the name of “Mahindra & Mahindra Limited”,B) Payment Method for Delivery Purpose: Payment is to be made by Pay Order/ Demand Draft in the name of “Mahindra & Mahindra Limited”, OR 'RTGS FUND TRANSFER' facility is also acceptable.

IMPORTANT NOTE All scrap sale will be on "as is where is" basis from the respective plants located in the state of Maharashtra and applicable VAT @ 5% or 12.5% under the Maharashtra Value Added Tax Act, will be charged. No 'C' Forms will be accepted from out state parties.

Bid Validity: 30 working days from the last date of the e-Auction as mentioned above. During this period, the Deposit of all the bidders shall be retained andreturned after full payment of EMD by the winning bidders is made (Refunds without interest, will be initiated against application in writing on their own letterheads.)

Payment Terms :

of 38

4

56

7

1)A.

B.

The material shall be sold on “AS IS WHERE IS’ basis. No complaints whatsoever will be entertained after the bid is made. The bidder is deemed to have inspected,examined reasonably and satisfied himself as to all matters regarding condition, type, quality, quantity generated as well as opening stock quantity of the material.No question or claim whatsoever in this respect shall be entertained after submission of the bid. The seller will not be in any manner responsible for anydamage/deterioration of the material as the saleable material is kept in the “Loading/Unloading” in open space. The Seller shall not be in any mannerliable whatsoever for the performance of the material.The number, quantity or tonnage, the nature of material and time of Auction etc., given in the catalogue or Auction bidding screen are only indicative approximatequantities. The material will be sold on prorata basis without any regard or consideration to this and no warrantee shall be implied.

If successful bidder failed to deposit the required EMD within the stipulated time then the participation fee paid at the time of registration will be forfeited and NOCOMPLAINTS” in this regards will be entertained.

INSPECTION / EXAMINATION OF MATERIAL AT SITE:

EMD Should be 10% of the Bid value. If the Bid value is less than Rs. 1 Lakh, the EMD will be 20%.

TERMS & CONDITIONS

Re-Sale will not be recognized and Release Order will be made out in the name of actual Successful Bidder only. The scrap purchase agreement is being awarded onprincipal to principal basis and the buyer is not an agent of the company. "Under any circumstances contracted rate will not be revised downward".

Refund of EMD: Immediately after expiry of the contract the buyer should forward their statement of accounts to sellers Accounts Department. The EMD will berefunded (without any interest) to the buyer after they have cleared all the scrap material in accordance with the terms of the material purchase agreement. Thesame should be confirmed by Material disposal officer of Mahindra & Mahindra Limited. The decision to adjust EMD towards any payment under the Material purchaseagreement will be solely at the discretion of the Seller.

Page 2 of 38


C.

2)A.B.

C.

D.E.

3a)A.

B.

J.

All the Taxes & Duties will be applicable on the day of delivery as per Government Rules.

Scrap of Industrial Refuse which consist papers, plastics, carboys, drums, packing materials must be recycle/ reuse and it should not be thrown any where. Buyers should follow environment norms. Also used paper scrap lot must be recycle/ reuse by the buyers.Any of the following defaults, where seller's plants personnel's decision will be final and binding, will be liable for termination of scrap purchase agreement andforfeiture of interest free EMDs.1 - Late arrival of Trucks, frequently, Non deployment of trucks etc.

SPECIAL NOTE FOR HAZARDOUS WASTES - [Check Category-(2) in lot table]

The buyer should furnish copies of his Sales Tax Registration Certificate, Excise Registration, PAN, incase required by the seller.

Govt. levies as on date (Taxes and Duties etc.) as applicable will be charged extra on the bidded rates.

Participation Hazardous Waste: Parties must have CONSENT OF SPCB, CPCB, AUTHORISED TRANSPORT FOR THE HAZARDOUS WASTE, MEMBER OF CHWTSDF ETCWHERE EVER REQUIRED, as an approval to bid for all Hazardous waste category e.g. Used Oils, Coolants, Solvent/ Thinner, Battery & Rest Hazardous waste/E-Waste/ Empty Drums/Barrels/Tins/Carbouys/Buckets/Totes also require SPCB & CPCB License.

All Taxes duties like Sale Tax, Terminal Tax, Excise Duty, Cess, TDS/TCS and any other taxes, duties (imposed) whether payable to the Central Government or tothe State Government or to the Municipal, Local or other authorities shall be deposited by the buyer with the Seller along with the purchase money as part of thepayment. Any revision in Government levies such as Excise Duty, Sales Tax and any other taxes, during the validity of the scrap purchase agreement, will be strictlydebited to buyer's account.

The winning bidder will be liable to provide forms as applicable for concessional Sales Tax while lifting the material. Failing which the seller shall charge Full SalesTax as per prevailing rates which will be extra & to be borne by the Buyer.

TAXES AND DUTIES.

Mahindra & Mahindra Ltd / Kisan Ramchandra Auctioneers Pvt. Ltd., shall be under no obligation to put up the lots singly or serially or in any particular manner andthey reserve the right to withdraw any lots at any time during the period of Auction without assigning any reason thereof. Mahindra & Mahindra Ltd/ KisanRamchandra Auctioneers Pvt. Ltd., may refuse to accept any bid from any person/ persons without assigning any reason for such refusal.

of 38

K.C.

D.E.

3b)A.

LIFTING RULES, NORMS AND DELIVERY OF MATERIAL:

Any short falls/deviation noticed by the seller on the above points (A to D) will be viewed seriously to an extent of termination of contract and forfeiting thedeposits.

The buyer will make his own arrangement for lifting and transportation of material from the seller's premises. However, the seller will only guide in loading andweighing (if on weight basis) of material. Buyer will not be entitled to claim any further facility or assistance in this regard. The material sold on weight basis will beweighed on seller's or authorised weighbridge in the presence of seller's representative. The weights recorded on the weighbridge will be final and binding on bothparties. No complaints as regards the shortage in the weight will be entertained later. The sale of Arising Scrap is on an "As Is Where Is" basis wet, dry or rustycondition, no segregation is allowed.

Buyer will strictly follow the Guidelines for transportation of Hazardous Waste as stipulated by CPCB and SPCB.

Buyer must have consent from SPCB to operate under section 26 of the Water (Prevention & Control of Pollution) Act, 1974, under section 21 of the Air (Preventionand Control of Pollution) Act 1981 and authorization under Rule 5 of the Wastes (Management & Handling) Rules 1989 and Amendment Rules 2000, 2003 /whichever applicable to your activities.

Re-Sale will not be recognized and Release Order will be made out in the name of actual Successful Bidder only.

1 Late arrival of Trucks, frequently, Non deployment of trucks etc.2 - Unsatisfactory/ non - clearance of awarded scrap (If the scrap is not cleared for consecutive 3 days, the same will be treated as unsatisfactory performance.) 3 - Removal of items other than covered by scrap purchase agreement.4 - In case of any default the Seller has the right to adjust the Interest free EMD against any other head for which such EMD was given.5 - Any other misconduct / default leading to loss of the seller

Page 3 of 38


B.

C.D.

E.

F.

G.

H.

I.

The buyer is not entitled to choose or pick any particular material from the lot. He has to lift the entire material as available in the lot and as per the directions of theseller.

The material loading and delivery will be effected during working days and as per timings specified by the seller at each locations. (No lifting on holidays and Weekly

The buyer is not allowed to lift any material other than the material described in the Lot even if such material is found in the storage yard at the time of takingdelivery, the material other than described in the lot but found at the site belongs to the seller should not be lifted. In case, any successful buyer is found collectingmaterial belonging to the other seller willfully, severe action may be instituted against such buyer by the seller. This may include even lodging of Police Complaint.The buyer has also to remove any material not belonging to him but found in his lot and the same should be brought to the notice of the seller.

Should the buyer fail to lift the scrap in time, including balance material, seller shall be forced to deliver the scrap to the buyer's place, debiting the transport andother charges incurred. Alternately, while disposing off the scrap to some other party seller shall recover the difference in value, if any, including transport / laborcharges from the buyer. And / or EMD will be forfeited forthwith and contract will stand terminated.

Loading plans should be intimated to Security and Excise Department one day in advance by the buyer.

Buyers are required to lift the scrap against full payments (inclusive of all govt. levies) in advance. The official payment receipt will have to be presented by thebuyer to Seller's Accounts in charge who will authorise clearance of suitable quantity. In case of shortfall in the amount, for whatever reason , the Seller, at itsdiscretion can detain/offload the truck till such shortfall is made. Any payments by Cash will not be accepted.

The material and the truck/vehicle will be subject to random security check by the seller for which the buyer will fully co-operate (i.e. Unloading and loading ofloaded vehicle for the random check at their own cost).

It is the responsibility of the buyer to keep track of the material generated and ensure timely lifting of all allocated material and also area cleared by each weekend.Buyer shall increase the frequency of lifting if he observes an increase in the generation. Numbers, Quantities or Tonnage, the nature of material mentioned aremere approximations and the materials will be sold without any regard or consideration to these Numbers/ Tonnage or nature of material and no warranty orguarantee shall be implied. The quantity arising may vary considerably, that is, there may be much more or less than the approximation indicated. The buyer willhave to lift the entire quantity of scrap actually generated during the period of contract as per the schedule given from time to time verbally/written.

of 38

L.

M.N.

4)A.

Segregation / sorting of material will not be allowed within seller's premises. Material will have to be lifted / loaded as available.The seller shall unconditionally be entitled to retain any material required for our own use and the discretion and advice of the Plant Managers would be final as towhat constitutes the scrap for collection at any time after the Auction or during the Contract Period.

a a oad g a d d y b d du g o g day a d a p g p d by a a o a o ( o g o o day a d yoffs): Material Location Kandivli: 8:00AM (arrival) to 12:30PM Material Location at Nashik and Igatpuri: 8:45AM (arrival) to 2:45PM Buyer's trucks must arrive at plants on or before the above arrival timings sharp, so that necessary arrangements can be made. A grace time may be allowedentirely at the discretion of scrap disposal officer. Trucks reporting after arrival timing will be returned back. Loading of the truck should be completed before theabove timings. If for any reason the loading is delayed beyond the time, subject to the discretion of the Material disposal officer, penalty will be charged per truckper day for extra efforts / overtime that would be incurred by us. Furhter, buyer will ensure that while weighing the truck at weighbridge, anything (Filled watercans, Filled tyre tubes, person sitting inside etc) which would add to the weight of the truck should be avoided failing which penalty as decided by Material disposalofficer would be chargedAccounts for the material cleared by the buyer shall be submitted by them to the Seller's Plant Accounts, to whom they shall be required to hand over the receipt ofmaterial cleared, whenever these are demanded.

EMD DELAY: In case of delay in making the payment penalty at the rate of 0.2% per day (prorata) of the material value will be charged. On further delay beyond 1week (plus extension granted if any by the seller in special cases), the bidders deposit will stand forfeited. In such a case the bidder will be declared as backed outand the seller may offer the contract to the 2nd highest bidder.

FORFEITURE/ PENALTY:

Page 4 of 38


B.

C.

5)A.

B.

6)A.

B

FORCE MAJEURE CLAUSE

LIFTING/ CLEARING DELAY: Should the buyer fail to deploy the vehicles and clear the scrap as per frequency / schedule / timings informed to the scrap purchaseagreement or given from time to time verbally/written, buyer is liable to pay a penalty of Rs. 1000/- per vehicle per day delay for each day of delay from the firstday of beginning of default. The penalty amount will be recovered from the deposit with the Seller including EMD. The Seller is free to claim such further losses ,damages caused by the bidder for failure to lift the materialIn the event of the buyer committing any breach of the terms and conditions and the buyer fails to satisfactorily execute the scrap purchase agreement, the sellerreserve the right to terminate the scrap purchase agreement and forfeit part / full earnest money deposit.

Seller shall not be liable for non-performance of any contract either wholly or in part nor for any delay in performance resulting due to cases beyond seller’s controlincluding fire, strikes, lock-out, closure, dispute with workmen, uncertain and unstable labour situation, war, riots, civil commotion, pestilence, epidemic, floods,accidents, damage or requirements of Government force or any circumstances. Should seller so determine shall be entitled at any time without notice to the buyerto cancel any contract, the performance of which is likely to be delayed by any of the cause aforesaid and in such cases, the buyer shall have no claim upon theseller of any kind, The provision of this paragraph shall not be limited or abrogated by any other terms of the contract whether printed or written nor will beprovision of this clause abrogate or limit the effect of any other clause mentioned in these terms and conditions.

In case any buyer purchases a lot and after making full or part payment removes part of the Lot and fails to remove the balance lot then, after the stipulated time isover (including the extension granted if any), the lot will be treated as abandoned and whatsoever money is paid for the lot will be forfeited along with the EMD etc.and the balance lot will be disposed off by Seller as it deems fit.ADDITIONAL TERMS AND CONDITIONS

The buyer shall have their own ESI & PF code numbers and the buyer will have to cover their employees working in the Company for Scrap Loading/ Segregations

The workmen employed by the buyer will be working under the buyer control and supervision and the buyer will be solely responsible for their wages, salaries,bonus, leave salary, wages for holidays, or any other allowance or pay etc., and all related statutory dues shall be paid by the buyer. The buyer shall maintain allsuch documents and records, which are statutorily required. The seller shall be in no way responsible or liable for lapses on above account. In case the seller isrequired to make any payment as per statutory requirement on the above account the same will be recovered from buyer's account.

of 38

B.

C.

D.E.

F.

G.

H.I.J.

The buyer shall have their own ESI & PF code numbers and the buyer will have to cover their employees working in the Company for Scrap Loading/ Segregationsetc. under ESI/Workmen compensation & PF Schemes.

The seller will permit the buyer and or their employees to enter the factory premises of the seller for limited purpose of providing the services.

The seller shall recover damages or loss caused to its property arising out of buyer's employee work or owing to any other act or omission on buyer's part and/orbuyer's workers and/or supervisor and/or buyer's representatives and that the buyer will undertake to pay the cost to the seller.

In the event buyer's labourers taking lunch in the seller's workers' canteen, the buyer shall have to purchase coupons at the rates fixed for them.Buyer's supervisor will supervise day-to-day work of their employees and they will work under their control and supervision.

The buyer shall pay wages to their employees as per the provisions of the Minimum Wages Act 1948. In addition, any rise in special allowance granted by theauthority under the Minimum Wages Act, 1948 is to be paid by the buyer from time to time.

The buyer shall comply with all the provisions of the Contract Labour (Regulation & Abolition) Act 1970. the buyer shall issue identity cards and appointment lettersto their workmen. Without identity card buyer's workmen will not be allowed to enter the plant.

The buyer shall at all times indemnify and keep indemnified the seller against all claims for compensation under the provisions of any law for the time being in forceor brought into force by or in respect of any workmen employed by the buyer in carrying out the contract work and against all cost and expenditure incurred by theseller in connection therewith. The seller shall be entitled to recover such sums paid or payable by way of compensation as aforesaid and cost or expenses inconnection with any claim thereto from the buyer's accounts.

On expiry of this contract, the buyer undertake to leave the premises with all their workmen peacefully and without creating any disturbances. Buyer's workmenshall have no claim of any nature whatsoever against the seller.

Page 5 of 38


7)A.

B.

C.

8)A.

B.C.D.

E.

9)All disputes and difference arising out of this E-Auction / contract shall be referred to the sole arbitration of seller or his nominee and the award of such arbitratorshall be binding on both the parties The contract shall be subject to the jurisdiction of Mumbai Courts for Kandivli plant Nashik Courts for Nashik & Igatpuri plants

ARBITRATION AND JURISDICTION

Buyers will observe safety rules and ensure safe working while executing the scrap purchase agreement.

Buyer shall abide by all the rules and regulations applicable to them and shall indemnify the company against any loss or liability suffered on account of non-compliance of any of the rules and regulations.

The buyer shall take necessary preventive measures for the safety of their workers as well as other persons at the place of work.Buyer is fully responsible for the safe disposal of the scrap material lifted by buyer and that in case of any claim due to loss or injury to any person or violation ofany environmental norms, the buyer will indemnify the seller against all such claims.

The buyer, their servants and agents shall be required to abide by all specific generals regulations of safety and discipline within the seller’s premises. The materialwill be handled by the buyer, their servants/agents at their own risk and any loss/damage whatsoever to any individual or property in such handling or as aconsequence thereof shall be the sole responsibility of the buyer.

Successful execution of the contract will mean regular clearance of the lot sold from specified location and payment of complete transaction money inclusive ofDuties, levies and taxes within specified time frame.Buyers are warned that any attempt to misuse Gate Pass, Challan authorizing delivery, the decision of the seller regarding satisfactory performance or otherwise willbe final and binding on the buyers and such lots in question shall be resold by the seller without any further reference to the buyers.

GENERAL

ABIDANCE BY Seller's RULES AND REGULATIONS, SAFETY AND DISCIPLINE

The highest Auction bid, if not meeting the reserve price, will be 'subject to the approval'. The Auction administrator of KRAuctioneers and the seller will supervisetogether the Auction sale and reserve the right to accept or reject such highest bid without declaring any reasons whatsoever. Such decision will be given to thehighest bidder within there period mentioned above payment terms. The Seller and KRAuctioneers reserves the right at its discretion to withdraw any lot prior tocommencement of Auction without assigning any reasons thereof. The Auctioneer may even refuse to accept any bid from any person, at any time without assigningany reasons for such refusal.

of 38

shall be binding on both the parties. The contract shall be subject to the jurisdiction of Mumbai Courts for Kandivli plant, Nashik Courts for Nashik & Igatpuri plantsonly.

Page 6 of 38

E-15-091-M&M-A.S.-MATERIAL LIST Update: 17-08-2015, 05:26 PM

Lot No. Description Location Approx. Qty

UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)

*AUTO EXTENSION: If any bid registered in the last 3 Minutes that Particular Lots Only will be extended. This extension of 3 minutes will be given till the bid is getting registered. If no bid registered in the last 3 minutes lot will be automatically closed.

E-Auction On: 03-09-2015, Time: 11:00 To 12:30 Hrs.* (Participation Fee Rs. 3,00,000/-)K-2 Part No. SCRAP02N - C I Boring with trace of oil

& coolant.Kandivli 800 MT 12.50% 5.00% 1-3 times in a

week/ As & when required

01-10-2015To

31-12-2015

C.I. Boring Others

N-1 Part No S415505-C.I. Boring scrap-CI boringscrap may consist of unsegrigated ss / msboring or truning scrap.

Nasik 40-45 MT 12.50% 5.00% As and When Generated

Plant-II and its locations

01-10-2015To

31-03-2016

C.I. Boring Others

I-6 Part No. 10005 Scrap: C.I. Turning Boring received from machine shop including coolant/oil/water in mixed condition.

Igatpuri 70 MT 12.50% 5.00% As & When required

01-10-2015To

31-03-2016

C.I. Boring Others

K-13 SCRAP38 Damaged Defaced C.I.Casting Scrap Kandivli 35 MT 12.50% 5.00% As & When required

01-10-2015To

31-03-2016

C.I. Casting Scrap

Others

K-3 Part No SCRAP01N-Steel Turning and Boring S

Kandivli 175 MT 12.50% 5.00% 1-3 times in a k/ A &

01-10-2015T

M.S. Turning OthersScrap. week/ As &

when required To

31-12-2015

N-37 Part No SCRAPMC-Machining Scrap: Turning/Boring/ Machining i.e. MS Steel Turning & Boringscrap.


(Plant II) and its locations

01-10-2015To

31-03-2016

M.S. Turning Others

I-12 Part No. 10001- Scrap M.S.Turning Boring- received from tool room and machine shop in coolant and oil mixed condition as is where is basis to be disposed.

Igatpuri 1 MT 12.50% 5.00% Every month end.

01-10-2015To

31-03-2016

M.S. Turning Others

K-6 Part No SCRAP57-Scrap Defaced Components of all types of material with iron & steel ,Rubber etc.from Warranty Garage. (Except Aluminum parts & Aluminum Casting Material) Mode and extend of Defacing of the above said item will be at the discretion of the Company.

Kandivli 50 MT Nil 5.00% As & when required

01-10-2015To

31-03-2016

Iron & Steel Others

Participation Fee: 1) Per day Rs. 300000/-, 2) Participation Fee for A Single Lot Rs. 200000/-, 3) For Lot No. K-25 and K-26 Jointly Rs. 500000/- of 38



UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-8 Part No S415526-Scrap Iron & Steel : All typesof scrap / leftover Iron & Steel in any Shape,Size /dia/ Dimension such as Angle, Channel,Construction/ Structural Steel,Pipes,roof sheetsGI,MS (lengths of not more that 08 feet )and torsteel (used,unused ,mangled, bent, twisted alldia and of any length), Metallic Pallets / Bins,empty damage tins,trolley with /without wheelall types of fabricated Items & Left over piecesduring fabrication. Steel bailing strip, steelwires, G I sheets/ ducting, turning/ drillingchips, Scrap machine components, nut bolts,cutcabinets, rusty, painted etc. also if any othermaterial like fibre/ plst/ rubber/ wood attached& can not removed to be lifted in this categoryonly (mode & extent of defacing will be at thediscration of the company)

Nasik 90-100 MT NA 5.00% As and When Generated

(Plant I & II) and its

locations

01-10-2015To

31-12-2015

Iron & Steel Others

p y)

K-4 Part No SCRAP20 -Iron & Steel Scrap both Heavy and Light e.g. Structural Steel, Bailing Strips / TOR steel used (mangled, bent, twisted all dias and of any length), Pipes including fittings of pipes e.g. bends, collars etc of GI/ steel/ mix alloy of all sizes & lengths which can be accommodated in a truck, Metallic Pallets / Bins, all types of Fabricated Items & Left over pieces during fabrication. steel wires, scraped G I sheets, cut M.S. shelves & storing bins , M.S. fittings at the end of rubber pipes, M.S.nut-bolts/ washers/ screws. Scrap Top and Bottom sheet, packing steel sheet cover of steel sheet bundles. (ALL ABOVE MATERIAL IN WET, RUSTED, PAINTED CONDITION -“AS IS WHERE IS BASIS” ) ETC. (Mode and extend of Defacing of the above said item will be at the discretion of the Company) .


01-10-2015To

31-12-2015

Iron & Steel Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


K-5 Part No SCRAP03- Scrap Defaced Auto Components of all types of material with Iron/ Steel/ Rubber etc including all types of cables (Except electrical cables), Scrap Process damaged / scrapped incomplete Sheet Metal Parts in Defaced Condition. Mode and extend of Defacing of the above said item will be at the discretion of the Company

Kandivli 60 MT 12.50% 5.00% As & when required

01-10-2015To

31-03-2016

Metal Comp. Others

N-28 Part No S415594-All types of Metallic DefacedAuto Components -consist of all type metalliccomponents,including Aluminium parts,and alsomay be with attachment or coating ofrubber,fibre items such as brake, cluth wire,stearing ,any type hardware etc ,received fromR & D & Warranty/ Service return components(Mode and extent of Defacing of Parts will be at

Nasik 60-70 MT NA 12.50% As and When Generated(Plant I & II)and its locations

01-10-2015To

31-12-2015

Metal comp. Others

(Mode and extent of Defacing of Parts will be atthe discretion of the Company generally as perthe Photograph kept for reference with thecompany)

N-29 Part No S415595-All types of Metallic DefacedAuto Components- consist of all type metallicauto components,including Aluminium parts,andalso may be with attachment or coating ofrubber,fibre items such as brake, cluth wire,stearing ,any type hardware etc.received fromvehicle PU, Supply Module & Vendor aid(CDA/LRR/DLRR) (Mode and extent of Defacingof Parts will be at the discretion of the Companygenerally as per the Photograph kept fromreferences with the company).


(Plant I) and its locations

01-10-2015To

31-03-2016

Metal comp. Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-18 Part No S415570-Rejected Steel Sheets consistof all type steel sheets with or without punchhole and die mark in any shape /any size/ anycondition i.e. old, new, dented, damaged, rusty,folded.etc.

Nasik 35- 40 MT 12.50% 5.00% As and When Generated


locations

01-10-2015To

31-03-2016

Sheet Metal Others

N-22 Part No S415577-Defaced sheet metal autocomp. i.e.Process rejected/ Incomplete /Damaged / Dented / rusty Sheet MetalParts/components received from all depts.Except R&D & Warranty. (Mode and extent ofDefacing of Parts will be at the discretion of theCompany generally as per the Photograph keptfor reference with the company).

Nasik 45 -55 MT 12.50% 12.50% As and When Generated


01-10-2015To

31-12-2015

Sheet Metal Others

N-34 Part No S415600-Non-excisable sheet metalparts consist of R&D & Warrenty sheet metalveh.components in defaced condition, it mayconsist of umremovable but defaced componentsattached with door or any assy. (Mode andextent of Defacing of Parts will be at thediscretion of the Company generally as per thePhotograph kept for references with thecompany)



01-10-2015To

31-03-2016

Sheet Metal Others

N-50 Part No. S415571 - Top & Bottom steel sheets ofstack - consist of all types of packaging sheets &side Patti of stacks in any condition (dented/damaged/ rusty / folded etc)

Nasik 25 - 30 MT NA 5.00% As and When Generated (Plant I)

01-10-2015To

31-03-2016

Sheet Metal Others

K-7 Part No SCRAP56- Scrap Corrugated / Cardboard Boxes wet/ dry in any condition, shapes and sizes/with or without gunny cloth.


01-10-2015To

31-03-2016

Corrugated Box

Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-17 Part No S415565-Corrugated/ Cardboard Boxeswait / dry in any condition, shapes and sizes/with or without gunny cloth ,butter paper /moulds of pulp .etc. you will deploy vehicles forlifting material from our other locations/warehouse also as per our sch.(You shall deployvehicle every day irrespective of quantity andalso if require you shall deploy another vehicleon same day)

Nasik 800-1000 MT NA 5.00% Daily (Plant I)as & when

asked- Plant II and its

locations

01-10-2015To

31-03-2016

Corrugated Box

Others

I-26 Part No. 40011-Scrap: Corrugated/card board boxes of any shape/ size and any condition of box, wet/dry with gunny bag/ cloth of any type. Contractor to provide bailing facility with manpower on site.

Igatpuri 500 MT NIL 5.00% Every day vehicle required

01-10-2015To

31-03-2016

Corrugated Box

Others

K-9 Part No SCRAP35-Wooden scrap in all forms and Kandivli 300 MT Nil 12.50% Daily/As & 01-10-2015 Wooden Otherssizes and any lenght,such as Indian Splintered packing wood, broken pcs of wood, broken/unbroken/scrapped non usable wooden pallets with or without steel frame and any other Scrap Wooden Materials including black old and Small pcs, Wooden Batons/bamboo in all sizes,Any type of Plywood /unbroken scrapped furniture items.(Segregation or dismantling of stack/ boxes is not allowed in company premises,and if done cut piece of wood of any size , shape ,length & chura generated at the time of dismentaling is to be lifted in this category only)

When required To31-03-2016

Scrap




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-4 Part No S415519-Wooden Scrap consist of in allforms and sizes and any length wood,such asIndian / Foreign Packing Wood, Broken WoodPieces, Non Usable Broken Wooden Palletswithout Metallic Frame, Wood Runner / Battonsboth Indian / Foreign of all sizes in any length.Wooden cable drums of all size. Bellies,Bamboos and Weathered Wood /Packing softwood, any type plywood etc.Packing hard boardmade of pressed wood powder/rice & wheat cropwaste of any size in dry/wet/broken conditionbeing used for packing of various rawmaterial.wood may having unremovablemetal,rubber,corrougated or any otherattachment.you will deploy vehicles for liftingmaterial from our other locations/ warehousealso as per our sch.(Segregation or dismantling



locations

01-10-2015To

31-03-2016

Wooden Scrap

Others

p ( g g gof stack / boxes / drums is not allowed incompany premises,and if done cut piece of woodof any size , shape ,length & chura generated atthe time of dismentaling is to be lifted in thiscategory only) (You shall deploy vehicle everyday irrespective of quantity and also if requireyou shall deploy another vehicle on same day)




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


I-21 Part No. 40001-Wooden scrap : Scrap wood consisting of splintered packing wood, soiled broken pieces of wood, non-usable wooden pallets with out steel fame. Twigs/leaves/trimmed tree wood and any other scrap and any other scrap wooden materials received from the entire plant, Plywood with Sunmica Sheets,Cut tree / trunks / hard broom and any type of wooden scrap / broken wooden pallets/wooden box etc. no segregation is allowed in the plant.

Igatpuri 100 MT NIL 12.50% Every day vehicle required

01-10-2015To

31-03-2016

Wooden Scrap

Others

E-Auction On: 04-09-2015, Time: 11:00 To 12:30 Hrs.* (Participation Fee Rs. 3,00,000/-)I-20 Part No. 10003- scrap : Defaced auto

components of Iron and Steel / rubber belts ,hoses & other rubber parts / plastics auto parts some partial aluminium parts (Alt t / C ) i l di i th


01-10-2015To

31-03-2016

Defaced Auto Components

Others

(Alternator / Compressor) including in the same category.,all cables-clutch/accelerator/ damaged parts fly wheel/liners/cam shafts.of all types .All scrapped engine assemblies / full eng. ine of all model totally defaced as per the photograph and hardwares included in the same category/casting (except cyl block, heads, Front Cover & other aluminium parts of related engines)/metal parts also in the same category. wef OCT'15 forging parts also included in auto component (con rod & crankshaft with gas cutting).No segregation is allowed. (defacing as per M&M Practice).




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


I-30 Part No. 10019- scrap : Warranty Defaced auto components of Iron and Steel / rubber belts ,hoses & other rubber parts / plastics auto parts some partial aluminium parts (Alternator / Compressor) including in the same category.,all cables-clutch/accelerator/ damaged parts fly wheel/liners/cam shafts.of all types .All scrapped engine assemblies / full eng. ine of all model totally defaced as per the photograph and hardwares included in the same category/casting (except cyl block, heads, Front Cover & other aluminium parts of related engines)/metal parts also in the same category. wef OCT'15 forging parts also included in auto component (con rod & crankshaft with gas cutting).No segregation is allowed. (defacing as per M&M Practice).

Igatpuri 30 MT NIL 12.50% As & When required

01-10-2015To

31-03-2016

Defaced Auto Components

Others

( g p )

N-2 Part No S415509-Scrapped items of MalleableCasting and Grey Iron Casting in Defaced /Damaged Condition, Scrapped Machine Bodies,dies, hand tools etc. (Mode and extent ofDefacing will be at the discretion of theCompany)


(Plant II) and its locations

01-10-2015To

31-03-2016

Casting Scrap

Others

N-24 Part No S415589-Used / Scrapped Hardware ofall type and sizes & condition, such as bolts,nuts, washers, pins, nipples, spacers, springsetc. (new ,old ,used ,unused ,rusty, broken,painted ).bolts more than 6" long & hose clips &any other hardware will be defaced condition(defacing will be at the discreation of thecompany generally as per the photographs keptf f )

Nasik 20 - 25 MT 12.50% 12.50% As and When Generated

( Plant I & II ) and its

locations

01-10-2015To

31-03-2016

Hardware Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


I-17 Part No. 10007- Misc Iron/steel /fabrication Scrap - All types of Iron and Steel Scrap both Heavy and Light such as constructional/Structural Steel, angles, channel, bailing strips etc., Pipes/ GI, sheet/ steel sheets of all sizes and lengths of not more that eight to ten feet, Metallic Pallets /scrap metal Bins, Trolleys with / with out wheels/ racks/ stand/ conveyor/ cupboard/ scrap machine components/ all types of Fabricated Items and Left over pieces during fabrication, steel wires, rods, cut shelfs, fittings, etc (Including wet, rusted, painted parts, cut empty metal drums of any size. Scrap to be lifted on as is where is


01-10-2015To

31-03-2016

Fabrication Scrap

Others

N-16 Part No S415553-Discarded Stainless SteelVessels/ Utensile & Stainless Steel Scrap in anyshape & size & form.(Mode and extent of

Nasik 6-8 MT NA 12.50% As and When Generated (Plant I &

01-10-2015To

31-03-2016

S.S. Scrap Others

p (Defacing will be at the discretion of theCompany)

(Plant 2 )

K-28 Part No SCRAP76 - Process Scrapped Aluminium & Aluminium casting Defaced Components. (Mode and extend of Defacing of the above said item will be at the discretion of the Company )


01-10-2015To

31-03-2016

Aluminium Scrap

Others

N-15 Part No S415552-Discarded aluminium vessels /Utensile & aluminum scrap in any shape, size,condition & form. Not segrigation, removing ofsmall attachments is not allowed material to belifted with attachments. (Mode and extent ofDefacing will be at the discretion of theCompany)



locations

01-10-2015To

31-03-2016

Aluminium Scrap

Others

I-1 Part No. 30004 - Scrap: Defaced Aluminium engine parts with attached small misc iron / steel parts / nut/ bolts / clip / valve guide / dish plug / weltch plug /water plug. No segregation is allowed in the premises or scrap yard gala. (defacing as per M&M practise ).

Igatpuri 25 MT 12.50% 5.00% As & When Required

01-10-2015To

31-03-2016

Aluminium Scrap

Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


I-3 Part No. 30001-Scrap :Aluminium Turning Boring scrap material received from machine shop in mixed condition with oil and coolant and water. Kept in the scrap yard gala to be lifted on as is where is condition

Igatpuri 135 MT 12.50% 5.00% As & When Required

01-10-2015To

31-03-2016

Alu. Turning & Boring

Others

K-8 Part No SCRAP18 Scrap Industrial refuse consisting of: Scrapped Papers (wet or dry), Carbon Paper, Plastic Paper and Bags, cotton waste, packing grass/packing waste/packing material such as thermocole,plastic bailing strips/bushes/caps in any size, pieces of jute bags, stationery items, Gunny Bags/Hessian cloth and its pcs, coir pcs, broken glasses, fused fluorescent tubes/bulbs, Rusty/Damaged/cuScrap Industrial refuse consisting of Scrapped Papers (wet or dry), Carbon Paper, Plastic Paper and Bags, cotton waste, packing grass/ packing waste/ packing material such as thermocole,plastic bailing strips/bushes/caps in any size, pieces of jute bags, stationery items, Gunny Bags/Hessian cloth and its pcs, coir pcs, broken

Kandivli 400 MT Nil 12.50% daily/As & When required

01-10-2015To

31-03-2016

Industrial Refuse

Others

Bags/Hessian cloth and its pcs, coir pcs, broken glasses, fused fluorescent tubes/bulbs, Rusty/Damaged/cut/coated buckets/baskets/ carboys /Drums (metal or plastic) with or without top & bottom lids , Empty Tea Boxes, Bins, Biscuit Tins, bottles, rubber cuttings, burnt coke, hand gloves in any condition, cement drain pipes, old aprons , emery cloths/ papers, sanding disc/grinding stones pcs, all types scrapped/used /discarded/F & OS items such as spectacles, goggles, face shield, all types of scrap




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


(Continued from Lot-K-8) /discarded/F & OS items such as spectacles, goggles, face shield, all types of scrap rubber/ plastics/ PVC/ fibre glass items, scrap of any other rubber/ plastic any other items generated from store or any other sources in our plant, with soil or putty coating or any other coating metal other than copper/Al/brass dust/chura generated when gas cutting, Packing Boxes Strips of Plastic / Metallic, Broken Plastic/ Bakelite items with or without metal contactor, Soaked wet paper & cotton waste, broken pots, broken glasses, plastic papers, saw dust, cuttings of tyres of company used vehicles, small wooden clips burnt / black / white ant eaten wooden planks, sheared/torn papers, used tea leaves, gunny pieces, used emery papers, used emery cloth, used scraped Filters with or without frame, nylon and metallic wire mesh, broken Hume pipes, synthetic material, scrap citofil wire floor mat, broken cup saucers, broken and damaged chairs/seats p , gwith or without metal.

N-3 Part No S415517 , Industrial refuse consisting offollowing scrapped items generated from alldepts. & or by any other source, vendors ofcompany scrapped papers, carbon papers , plastic papers,stationery items, Any type of packing aid ormaterial such as Plastic, grass, cotton ,sponge,thermocole, plastic bailing strips, bushes, caps ,gunny bags / Hessian cloth pcs, coir pcs etc., alltypes and capacity drums cut with / without topand / or bottom, all types of tin, tea boxes,bottles, scrap glass wool. burnt coke, ,cementdrain pipe, aprons, emery cloth, sanding disc,grinding stones, all types of scrapped / used /discarded F & OS items such as spectacles,goggles, face shields.continued--



locations

01-10-2015To

31-03-2016

Industrial Refuse

Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


Industrial Refuse : All types of scrap rubber, plastic,pvc,fiber glass,frp,fibre,& roof sheets ,broken chairparts with/without wooden backup other than autocomp. metal (other than copper / brass ) dust / churagenerated from casting / machining, metal powdergenerated during grinding operation, melted metallumps generated when gas cutting , plastic buckets,bins / crates ( cut / broken) scrapped canvas / rexinepcs, broken carbuoys, pcs of jute bags, dented /damaged drums,sound deadener / spot weld sealer,broken Hume pipe, damaged seats made of jute /sponge / Dunlop, fuel pipes with rubber on either orboth ends, broken drain pipes, synthetic material, anyfloor mat,broken glass pcs, broken pots, broken cupsaucers, concrete lumps with or without steel, rottenwood pcs, grinding mud, desicant bags, All types ofnon hazardous sealer, house keeping dust & debris,line thrown un-segregated hardware and small pcs ofcourogated / cardboard box if any,non HzW sealerg y,soaked cloth pcs, used cotton hand gloves from shops(as per MSDS) you will deploy vehicles for liftingmaterial from our other locations/ warehouse also asper our sch.(You shall deploy vehicle every day ir

I-11 Part No. 40002 -Scrap :Industrial Refuse: Consisting scrap paper, used carbon paper, Plastic Paper, Packing strips of metal/nylon , rubber/plastic items,used hand gloves (rubber), packing tharmocal, polythene bag, cut rubber carbuyos, rubber hoses with metal connector, torn gunny bags, packing grass, rusty and damaged plastic drums without top and bottom lids, cut drums, dry cotton waste, grinding wheel/paper,broken plastic trays, and shoes/slipers in any shape/size/form etc ., Scrap Engine plastic/tarpauline covers of all types of engines. (SEGREGATION IS NOT ALLOWED IN THE SCRAP YARD GALA- MATERIAL AS IS WHERE IS BASIS LIFTED BY THE CONTRACTOR)

Igatpuri 150 MT NIL 12.50% Every day vehicle will be

required

01-10-2015To

31-03-2016

Industrial Refuse

Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-43 Part No. S415586 - Scrap paper for pulp- consistof scrap Accounts/ Excise / or any other paperscrap, cards, magazines, inventory tags,canteen coupons, old records in any condition.documents may consist of carbon, file &clips.You shall ensure the material should begoing directly for making pulp. (for lifting ofmaterial you shall deploy vehicle as per scheduleirrespective of quantity / truck load etc.)



locations

01-10-2015To

31-03-2016

Paper Scrap Others

K-42 SCRAP96 : SCRAP OF NEWS PAPERS,USED OFFICE PAPERS, OFFICE STATIONERY, BOX FILES, OFFICE FILES, MAGAZINES, BOOKS, OLD PAPER RECORDS OF OFFICE ETC

Kandivli 20 MT Nil 5.00% As & When required

01-10-2015To

31-03-2016

Paper Scrap Others

I-40 Part No. 80017- Scrap paper for pulp-consist of scrap Accounts/ Excise / or any other paper scrap, cards, Office files, box files, magazines, inventory tags, canteen coupons, old records,


01-10-2015To

31-03-2016

Paper Scrap Others

y g , p , ,newspaper in any condition. documents may consist of carbon, file and clips.You shall ensure the material should be going directly for making pulp. (for lifting of material you shall deploy vehicle as per schedule irrespective of quantity / truck load etc.) Shredding Certificate for Pulp required from the contractor.

K-41 Part No SCRAP19- Scrap/ broken/ unbroken Grinding Wheels of any type/ sizes.

Kandivli 3 MT Nil 12.50% As & When required

01-10-2015To

31-03-2016

Grinding Wheels

Others

K-38 Part No SCRAP59-Scrap- Iron & Steel including Scrap of Hand Tools, Welding Holders, Forging & Scrap C.I. Lumps from Foundry with or without slag, Moulding Boxes, Conveyor, Dies, Machinery parts, steel items, lead locks of tyres, (including rejected machines not covered under Capital Goods) and other Excisable items. (Mode and extend of Defacing of the above said item will be at the discretion of the Company)


01-10-2015To

31-03-2016

Tools Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-19 Part No.: S415572 Broken use carbide tipsinserts, drills, reamer, cutter . As per materalavailable & seen at the time of inspection beforeauction .no any segrigation allowed once it italloted to customer

Nasik 2-3 MT 12.50% 12.50% As and When Generated (Plant II)

01-10-2015To

31-03-2016

Carbide Tips Others

K-29 Part No. SCRAP42 SCRAP OF DISCARTED -BRASS and ALUMINIUM VESSEL FROM CANTEEN, HAMMER, TAPS, Stainless steel taps, and any other canteen scrap and aluminium scrap Scrap Material attach with Copper and Brass which can not be separated and dismentled

Kandivli 3 MT NIL 5.00% As & When required

01-10-2015To

31-03-2016

Br. & Alu. Vessel

Others

N-55 Part No.: S415608 Used Wheels of Trolley.: Alltypes of used wheels of trolleys i.e.ms,rubber,frp,uhmw and any other metal with /without M S bracket

Nasik 6-8 MT NA 12.50% As and When Generated (Plant I)

01-10-2015To

31-03-2016

Metal comp. Others

I-62 Brass Scrap - Brass scrap includes in metal scrap, all brass scrap related to engine assembly

Igatpuri 50 KG 12.50% 12.50% As & When required

01-10-2015To

Brass Scrap Others

received in the scrap condition and as is where is basis, no segregation is allowed.

31-03-2016

I-63 Copper Scrap - Copper scrap includes in metal scrap, all copper scrap received from assy and machine shop in scrap condition and not used in future hence disposal as is where is basis. No segregation is allowed


01-10-2015To

31-03-2016

Copper Scrap Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


E-Auction On: 05-09-2015, Time: 11:00 To 12:30 Hrs.* (Participation Fee Rs. 3,00,000/-)N-51-B Part No.: S415622 Puncture new tyres removed

from vehicle. Scrap puncture new tyres receivedfrom vehicle assembly lines, stores etc, it maybe pucture , burst, cut at any location. (forlifting of tyre you shall deploy vehicle as perschedule given irrespective of quantity)

Nasik 200-250 NO 12.50% 12.50% As and When Generated


01-10-2015To

31-03-2016

Tyres Others

K-24 Part No SCRAP47-Scrapped/used Tyres with or without tubes of all types of Company used Vehicles/ Forklift Tyres In any condition / make / size (cut / bent / worn out / with damaged wheel rim)

Kandivli 170 NO Nil 12.50% As & when required

01-10-2015To

31-03-2016

Tyres Others

N-14 Part No. S415548:-Used Scrapped Forklift & toetruck Tyres:- consist of all types and sizes forklift & toe truck tyres In any condition / make /size (cut / bend / worn out / with , withoutd d h l i ) (f lifti f t h ll

Nasik 40-50 NO NA 12.50% As and When Generated


01-10-2015To

31-03-2016

Tyres Others

damaged wheel rim) (for lifting of tyre you shalldeploy vehicle as per schedule irrespective ofquantity)

I-32 Part No. 60007/60007A-Scrap Used Tyres of all types of Company used Vehicles/ jeep/Forklift Tyres In any condition / make / size (cut / bent / worn out / with damaged wheel rim).

Igatpuri 10 NO NIL 12.50% As & When required

01-10-2015To

31-03-2016

Tyres Others

N-89 Part No. S415662- Used/Scrapped tyres of anytype vehicle -consist of used tyres of any typevehicle i.e.company used vehicles, R&D Vehicles/ warrenty return etc. with or without tube. Inany condition / make / size (cut / bent / wornout etc) (for lifting of tyre you shall be deployvehicle as per schedule given ir respective ofquantity)



locations

01-10-2015To

31-03-2016

Tyres Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-90 Part No :S415663- Used/Scrapped tyreassembly of any vehicle : Consist of used tyreassembly of any type vehicle ( i.e. Tyre , Tube &wheel rim, if tube less no tube) i.e companyused vehicles, R&D Vehicles, warrenty returnetc. in any condition / make / size (cut / bent /worn out / with / without damaged wheel rim).(for lifting of tyre you shall deploy vehicle as perschedule irrespective of quantity)



locations

01-10-2015To

31-03-2016

Tyres Others

N-32 Part No S415598-All Types of non-metallicdefaced Auto Components received from AllPU’s, All supply modules, Vendor aid, R & D &Warranty cell including cardboard components /Rexene Components / Cushion & Cover of seats/ Wind shield & Window Glass / Rubbercomponents / melt rubber /multilink bush ,wiring harness looms etc All type of Auto


( Plant I& II) and its

locations

01-10-2015To

31-03-2016

Auto parts Scrap

Others

wiring harness, looms etc All type of AutoComponents other than Metal, Plastic & FRPcomponents (Mode and extent of Defacing ofParts will be at the discretion of the Companygenerally as per the Photograph kept forreference with the company) (for lifting ofmaterial you shall be deploy vehicle as perschedule irrespective of quantity / truck load

N-30 Part No S415596-All Types of Plastic / Fiber /FRP Defaced Auto Components -received from R& D & Warranty / Service return components,these components may having unremovabelattachments of metal or any other material.(Mode and extent of Defacing of Parts will be atthe discretion of the Company generally as perthe Photograph kept for references with thecompany) (for lifting of material you shall deployvehicle as per schedule irrespective of quantity /truck load etc )


( Plant I& II) and its

locations

01-10-2015To

31-03-2016

Plastic & Fibre

Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-31 Part No S415597-All types of Plastic / Fiber /FRP Defaced Auto Components received fromVehicle PU, Supply Module, Vendor Aid (CDA /LRR / DLRR) these components may havingunremovabel attachments of metal or any othermaterial.(Mode and extent of defacing of partswill be at the discretion of the Companygenerally as per the Photograph kept for

f ith th )



01-10-2015To

31-03-2016

Plastic & Fibre

Others

I-39 Part no. 30009 - Scrap of used, broken aluminium assorted sheet/extruded shapes/Not in used condition for office furniture with attached some metalparts/ screw/ bolt/ clip and other fabrication misc. items. You will get all material is as is where is basis. No segregation is allowed in the part premises or scrap yard gala.

Igatpuri 3 MT NIL 5.00% Immediate clearance required.

01-10-2015To

31-03-2016

Write-off Scrap

Others

N-65 Part No. S415639- Scrapped office chairs -consisting of all types of scrapped,broken chairs i.e. of plastic ,wooden , fibre ,Metallic ,cloth rexin foam revolving type etc

Nasik 2-3 MT NA 12.50% As and When Generated (Plant 1)

01-10-2015To

31-03-2016

Misc Others

I-59 Part no.10003WR -Write off rejected defaced auto components including rubber/plastic/ iron/steel/ all engines related parts on the same categeory. some partial aluminium parts(Alternator/Compressor) including in the same category. Forging parts also included in auto component (con rod & crankshaft with gas cutting)

Igatpuri 10 MT NA 12.50% As and when required

01-10-2015To

31-03-2016

Write-off Scrap

Others

I-60 Part no. 30004WR -Write off rejected dafacedaluminium components of all types of enginerelated parts in the same category. You will getall parts in defaced condition


01-10-2015To

31-03-2016

Write-off Scrap

Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-111 Part No. _________Used / scrap empty Capsule of Plastic: - used / scrapped Empty Capsule , i.e. packaging box of automotive transmission, made of Plastic / Fibre / FRP, to be lifted on as is where is basis without segrigation i.e.. cut , broken etc. Though it is a set of top & bottom , while lifting counting will be done on a single piece basis instead of set.

Nasik 2000-2200 NO NA 12.50% Plant 1 01-10-2015To

31-03-2016

Packaging part

Others

I-65 Canteen stainless steel utensil received in the scrap condition, not used in canteen, hence disposal as is where is basis.


01-10-2015To

31-03-2016

Canteen S.S. Scrap

Others

I-66 Diamond Tips - Received from machine shop in torn and broken and damaged conditon. No segregation is allowed. Material is as is where is basis


01-10-2015To

31-03-2016

Diamond Tips

Others

I-68 Canteen aluminium utensil received in the scrap conditon not used in canteen hence disposal as


01-10-2015To

Canteen Alu. Scrap

Othersconditon, not used in canteen, hence disposal as is where is basis.

required To31-03-2016

Scrap

N-40 Part No S415614 Discarded Glass & Glass ItemsConsist of All types of domestic & industrialglass with or without wire mesh, all type of glassbottles,& articles. & Civil items like discardedsanitary items, titles, kadappa, marble, granite.Where is as is basis



01-10-2015To

31-03-2016

Glass Scrap Others

I-67 Broken plain glass received from civil dept. from entire plant for renovation or change roof.


01-10-2015To

31-03-2016

Glass Scrap Others

K-63 Old Scrap Used M.S. Fuel Storage Tank Approx. Size : 20' x 7' Approx. Weight:- 4 to 5 MT,Complete unit with cover disposal on As is where is basis without defacing and dismantling. Buyer need to load tank safely by using Hydra/Crane in suitable vehicle by following safety norms

Kandivli 1 NO Nil 5.00% One Time Immediate Clearance

Fuel Storage Tank

Others




UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


K-26# Part No SCRAP32-Scrap Waste Slag with broken core pieces - Waste Slag including unusable core sand, broken core broken lining of induction furnace &Scrap of Waste Slag with broken core pieces

Kandivli 1600 MT 12.50% 12.50% daily/As & When required

01-10-2015To

31-03-2016

Slag Others

K-25# Part No SCRAP31-Scrap used/Waste Sand & Carbon Soot/Griding sludge. Waste sand mix with iron pieces which pass through the sieve.ii) Broken cores pieces mixed with the aboved waste sand .iii) Fine sand arising from sand cooler. iv) Shot blasting dust.v)Granding sludge generated by Machine shop.vi) Carbon soot generated by Heat Treatment vii)Any other sand arising in production.

Kandivli 6575 MT 12.50% 12.50% daily/As & When required

01-10-2015To

31-03-2016

Sand Others

E-Auction On: 07-09-2015, Time: 11:00 To 12:30 Hrs.* (Participation Fee Rs. 3,00,000/-)Hazardous Waste Material: Only For SPCB/CPCB Consent Holders Only.Hazardous Waste Material: Only For SPCB/CPCB Consent Holders Only.Note for Participation: For the Hazardous items Out State Parties are Not Allowed.

N-104 Part No. : S415681 - Scrap empty tins 0.5 Lit to 200 Lit :- All types of metal /plastic container of paint/ oil / chemicals / adhesives in any quality in any condition (good / bad / dented / damaged / cut / with holes / with sealer /sludge/ hardened adhesives like Fevicol on inner walls) etc as available. with or without lid/cover. (For lifting of material you shall deploy only consented vehicle as per schedule and irrespective of any minimal Quantity)


(Plant I & II)

01-10-2015To

31-03-2016

Hazardous Waste

For SPCB & CPCB

Consecent Holders only

K-23 Part No SCRAP74-Scrap Cooking Oil tins from canteen with or without lid/top cover. (Participant must have Authorised Transport of MPCB Consent)


01-10-2015To

31-03-2016

Tins Canteen For SPCB & CPCB


I-18 Part No. 50003-Scrap Empty Plastic carbuoys - capacity varying from 5 liters to 50 liters each - as is where is condition


01-10-2015To

31-03-2016

Plastic Carbuoys

For SPCB & CPCB





UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


K-17 Part No SCRAP70-Scrap 200/ 205 Ltrs capacity Drums filled with used Coolant/ water etc. (Participant must have Authorised Transport of MPCB Consent)


01-10-2015To

31-03-2016

Used Coolant For SPCB & CPCB


N-45 Part No. S415602 Used oil mixed with water 200Lit barrel- oil qty may be 5-15% in each barrel &filled in 200/ 205/210 lit.capacity barrel ( Qty-striclty 200 lit in each barrel to be lifted) .(Oil ofSchedule – 5 category) (For lifting of materialyou shall deploy only consented vehicle as perschedule and irrespective of any minimalQuantity)

Nasik 30- 40 NO NA 12.50% As and When Generated (Plant I&II)

01-10-2015To

31-03-2016

oily water/ coolant

For SPCB & CPCB


N-7 Part No- S415523 : Used oil 200 Lit barrel -used oil & water mixed used oil received from alldepts. and or separated by oil skimmer such asused engine oil, hydraulic oil, cutting oil, thermicfluid, brake fluid, burnt black oil, transformer oil,heat transfer oil industrial gear oil compressor

Nasik 50 - 60 NO NA 12.50% As and When Generated (Plant I&II)

and its locations

01-10-2015To

31-03-2016

Used Oil For SPCB & CPCB


heat transfer oil, industrial gear oil, compressoroil, or any other used oil etc.filled in Barrels of200/ 205 / 210 Ltrs. capacity drum.(Oil ofSchedule – 5 category) (Qty-striclty 200 lit ineach barrel to be lifted) (For lifting of materialyou shall deploy only consented vehicle as perschedule and irrespective of any minimal

K-16 Part No SCRAP40-Scrap 200/ 205 Ltrs Drums filled with used Oil (Participant must have Authorised Transport of MPCB Consent)


01-10-2015To

31-03-2016



I-27 Part No. 20002-Scrap :200/205/210 liters drums filled with used engine oil/hydraulic oil/cutting oil/kerosene and any other scrapped oil- (Metal Drum price included)


01-10-2015To

31-03-2016



I-10 Part No. 20007 -Scrap Extraction of waste oil, capacity 200/205/210 ltrs metal drums . Metal drum price to be included in the scrap price. Oil will have diesel/ kerosene / water mixed with itself (Metal Drum price included)


01-10-2015To

31-03-2016

Waste Oil For SPCB & CPCB





UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-13 Part No S415544- Spent Solvent 200 L .Barrel -i.e. Used thinner/ spent solvent mixed withflushed paint, lacquers, pigments, etc. filled in200/ 205 / 210 Ltr. Capacity barrels.( Qty-striclty 200 lit in each barrel to be lifted) (Forlifting of material you shall deploy onlyconsented vehicle as per schedule andirrespective of any minimal Quantity)

Nasik 80-100 NO 12.50% 12.50% Weekly (Plant I) and its locations

01-10-2015To

31-03-2016

Used Thinner For SPCB & CPCB


K-18 Part No SCRAP55-Used/Spent Solvent i.e. Scrap 200 / 205 Ltrs capacity Drums filled with used Thinner. (Participant must have Authorised Transport of MPCB Consent)

Kandivli 25 NO 12.50% 12.50% As & when required

01-10-2015To

31-03-2016

Used Thinner For SPCB & CPCB


N-10 Part No S415529-Scrap Empty 10L to 50LMetallic container : consist of standard Metalliccontainer of paint/ oil / chemicals / adhesives inany quality in any condition (good / bad /

Nasik 10000-12000

NO NA 12.50% Twice in a Week ( Plant I & II) and its

locations

01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB

Consecent Holders onlyy q y y (g / /

dented / damaged / cut / with holes / withsealer on inner walls / with hardened adhesiveslike Fevicol on inner walls) etc as available. withor without lid/cover. (For lifting of material youshall deploy only consented vehicle as perschedule and irrespective of any minimalQuantity)

y

N-23 Part No S415583- : Empty 5 To 50 Ltr standardPlastic Carboys / bucket /container: with orwithout Cap in any condition (good / bad /dented / damaged / cut / with holes / withsealer on inner walls / with hardened adhesiveon inner walls) etc as available. with or withoutlid / cover (For lifting of material you shalldeploy only consented vehicle as per scheduleand irrespective of any minimal Quantity)


(Plant I& II) and its

locations

01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB





UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


K-21 Part NO SCRAP86-Scrap Empty Plastic containers from 5 to 45 Ltrs capacity.and scrap of 10 to 25 kg buckets with or without handle, Other plastic empty container up to 45 Ltr. Capacity. (Participant must have Authorised Transport of MPCB Consent)


01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB


K-22 Part No SCRAP68-Scrap Empty Plastic Barrels & Plastic Drum from 50 to 125 Ltrs capacity. (Participant must have Authorised Transport of MPCB Consent)


01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB


K-11 Part No SCRAP44-Scrapped Empty 200/ 205 Ltrs capacity M.S. Barrels of any condition as available with/ without Holes, with/ without Top Covers. (Participant must have Authorised Transport of MPCB Consent)


01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB


I-52 Part No. 20006A - Empty Plastic Drum capacity of 200/205/210 liters kept in Scrap yard for not used in future hence disposal as is where is

Igatpuri 50 NO NA 12.50% Immediate clearance required

01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB

Consecent pbasis. Drum is broken/torn condition.

qHolders only

N-11 Part No S415530-Scrapped Empty 205 / 200 /220 liters standard Metallic / Plastic Barrels ofOils/ Chemicals in any quality in any condition(good/ bad/ dented/ damaged/ cut/ with holes/with sealer on inner walls / with hardenedadhesives like Fevicol on inner walls) etc asavailable. with or without lid / ring / cover. (Forlifting of material you shall deploy onlyconsented vehicle as per schedule ir respectivef i )

Nasik 7000-8000 NO NA 12.50% Daily as per genearion ( Plant I & II)

and its locations

01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB


I-7 Part No. 20006-Scrap: Empty 200/205/210 Liters Metal Drum on as is where is basis.


01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB


K-20 Part No SCRAP36-Scrap Empty 210/200 liters plastic barrels. (Participant must have Authorised Transport of MPCB Consent)


01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB





UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


K-10 Part No SCRAP43-Scrap 20/ 25/ 50/ 125 Ltrs capacity empty MS Drums of any condition as available with/ without top lids or Bottoms. (Participant must have Authorised Transport of MPCB Consent)


01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB


N-20 Part No S415573-Empty 100 To 125 Ltrstandard Plastic Carboys with or without cap inany condition (good / bad / dented / damaged /cut / with holes / with sealer on inner walls /with hardened adhesives like fevicol on innerwall) etc as available.(For lifting of material youshall deploy only consented vehicle as perschedule and irrespective of any minimalQ tit )



locations

01-10-2015To

31-03-2016

Empty Containers

For SPCB & CPCB


N-86 Part No. S415533 Scrapped copper / cr.cu. & brass-In any shape and size & form, spot welding tips, kick less cable, tip holders, tip nuts, nipples, brass shims,taps,any other assy



01-10-2015To

31-03-2016

Copper Scrap For SPCB & CPCB

Consecent Holders only, pp , , p , y y

etc. no segrigation & removing of small attachments like rubber, nuts, fittings etc material to be lifted as per our schedule & our consent quantity only. (For lifting of material you shall deploy only consented vehicle as per schedule and irrespective of any minimal

locations y

K-52 Part No.SCRAP100 SCRAP OF ELECTRONIC WASTE


01-10-2015To

31-03-2016

Electronic Waste

For SPCB & CPCB


N-6 Part No S415522 -Used / Scrapped Batteries ofcompany used vehicles, R & D Vehicles, linerejections ,Forklifts, D G Sets, etc.material to belifted as per our schedule & our consent quantityonly.(For lifting of material you shall deploy onlyconsented vehicle as per schedule andirrespective of any minimal Quantity)

Nasik 250- 300 NO NA 12.50% As and When Generated


locations

01-10-2015To

31-03-2016

Batteries For SPCB & CPCB





UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-49 Part No S415587 -Used / Scrapped Batteries ofcomputers / UPS, etc.material to be lifted as perour schedule & our consent quantity only. (Forlifting of material you shall deploy onlyconsented vehicle as per schedule andirrespective of any minimal Quantity)



locations

01-10-2015To

31-03-2016



K-37 Part No SCRAP90-Scrap All types of used/scraped Batteries of Vehicles ,Dg sets,fork lift and computers


01-10-2015To

31-03-2016



I-14 Part No. 80004-Electrical & Electronics scrap - Consisting of any size or type of Electrical Motors,Voltage Stabilizer,Various types of meters, MCB,ELCB,PCB,Electrical fans, Vaccum Cleaners, Regulators, Instrument Pannels, electrical Pannels, chokes, Electrical fittings such as bulb holders, buttons, top pins, sockets, equipments appliances Scrap tublight fittings


01-10-2015To

31-03-2016

Electrical Scrap

For SPCB & CPCB


equipments, appliances, Scrap tublight fittings, fused sodium vapor glove lamps 250/400/ 125 watts, Misc. electrical scrap such as starters/HRC fuses, contactors, fuse body parts, switches, scrap used damaged electricl /telephone cables/distribution cable /wires on as is where is basis.Material to be lifted As is where is basis.

I-51 E-waste consisting of IT telecommunication instrument/ cartridges/ printer reboon & tonner, Fax Machine/ CPU/SMPS/Mouse, PC Monitor, Telephone Instruments, cards / cd etc. material to be lifted as per our schedule and our consent quantity only


01-10-2015To

31-03-2016

E-waste Scrap

For SPCB & CPCB





UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-84 Part No. S415665- Scrapped / Used all typecables /wires : consist of all type and size wires/ cables i.e. aluminium, copper, telephone, lan,network, fibre optic etc of any core, shielded,armoured etc. Length not more than 20 ft.material to be lifted as per our schedule & ourconsent quantity only.(For lifting of material youshall deploy only consented vehicle as perschedule and irrespective of any minimalQ i )



locations

01-10-2015To

31-03-2016

E-waste Scrap

For SPCB & CPCB


K-34 Part No SCRAP24-Scrapped used electrical Aluminium / Copper wires including damaged telephone cables.


01-10-2015To

31-03-2016

E-waste Scrap

For SPCB & CPCB


K-36 Part No SCRAP89-Electrical scrap such as panels ( MS/AL/GI body parts), switch boards , electric motors,Electrical power/oil capacitors, thermostat , electronic scrapped ,


01-10-2015To

31-03-2016

E-waste Scrap

For SPCB & CPCB

Consecent Holders only, pp ,

fixture,starter,Tubelight, blub,flurocent lamps,clf blub , fuse, & other electronic items. etc.

y

N-87 Part No.S415648 Scrap misc.electical & electronic items : –consist of --Any size or type of motors, voltage stabilizers, various types of meter, MCB, MCCB,PCB, electrical fans, Vacuum cleaner, fan regulator, instrument panel, electrical panel, chokes, electrical fittings such as bulb holders ,Buttons, Tops Pins, Sockets, equipments, appliances, instruments etc. Scrap Tube Light Fitting, With or without chokes, fused tube & bulbs etc.material to be lifted as per our schedule & our consent quantity only.(Mode and extent of Defacing will be at the discretion of the Company). (For lifting of material you shall deploy only consented vehicle as per schedule ir respective of quantity)


(Plant I & II)

01-10-2015To

31-03-2016

E-waste Scrap

For SPCB & CPCB





UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


N-88 Part No.S415649 Scrap IT & Communication Accessories –consist of - Any type of printer, fax machine, Key board, CPU with input /output devices, SMPS, Mouse, PC monitors, telephone instrument, Printer (toner/ink) cartridges. material to be lifted as per our schedule & our consent quantity only.(Mode and extent of Defacing will be at the discretion of the Company).(For lifting of material you shall deploy only consented vehicle as per schedule and irrespective of any minimal Quantity)



locations

01-10-2015To

31-03-2016

E-waste Scrap

For SPCB & CPCB





UOM Excise Duty

%

VAT % Frequency of

Clearance

Contract Period

Category (1)

Category (2)


# Please Read Carefully Sperical Terms & Conditions for Lot No. K-25# & K-26#.

All the above referred documents are mandatory and compulsory before entering into the e-auction.2) The participation fee amount for both these lots jointly will be Rs. 5 lakhs.3) No single lot can be participated and bidders are required to register for these 2 lots jointly.4) This participation fee of Rs. 5 lakhs will be converted into EMD on finalization of lots. If 10% EMD exceeds Rs. 5 lakhs then the differential amount has to be paid by the party while collecting the contract copy. This is to be paid within 3 days from the decision of the company failing which participation fee will be forfeited.5) If the H1 party fails to honour the contract after finalization then this Rs. 5 lakhs participation fee will be forfeited.

1) For registration of Lot No. K-25 & K-26, the bidder should submit following documents at the time of registration only-a) Pan Card copy duly signb) VAT / Excise registration certificate detailsc) Labour Insurance copy / ESI registration copyd) Number of labours engaged for this activity with complete list e) PF membership and details thereoff) Logistics arrangements: Vehicle Registration Nos. (every day 4 to 5 trucks or as per company requirement)g) Safety : Details of personal protective equipment for loading workh) Details of Supervisor

c) The customer who is having Consent for Establish, Collection center, Consent for renewal are not be allow to Participate in e-auction.d) Delivery of hazardous waste will be given only in MPCB authorized vehicles.

* Additional Terms & Condions for all Types of Hazardous Waste Items.a) For Lifting of Hazardous Waste, Only those customers to be allow to participate in auction, who is having valid consent to operate from MPCB & condition of acceptance of hazardous waste / e-waste is to be specifically mentioned in the consent.b) Re-processor, recycler should have registration certificate of CPCB.


Update: 17-08-2015, 05:26 PM

E-Auction No.: E-15-091E-Auction on Behalf of

Mahindra & Mahindra Limited, Automotive Sector, Kandivli, Nashik & Igatpuri Plant

BIDDERS REGISTRATION FORMDate: ___/___/2015

Email ID (All Caps)

Mobile No. (SMS/Login Details Purpose)

Name of Firm for Registration: M/s. ____________________________________________

: _______________________________________________

: _______________________________________________

MPCB Reg. No.

Correspondence Address

CPCB Reg. No.

Shop Act No.: _______________________________________________

SPCB Reg. No.

Registration Details::

: _______________________________________________

Contact Person: _______________________________________________

: _______________________________________________

License Details:

Factory and/or Godown Address : _______________________________________________

:CODE: _______- _________________________________

: _______________________________________________

: _______________________________________________

: ________________________ PIN- |__|__|__|__|__|__|

: |0|___|___|___|___|___|___|___|___|___|___|

Telephone Nos.

Fax No.

VAT/TIN No.: |___|___|___|___|___|___|___|___|___|___|

PAN (with Xerox)

: |___|___|___|___|___|___|___|___|___|___|___|

: _______________________________________________

:CODE: _______- _________________________________

: _______________________________________________

Excise No.

ECC Code No.

PF Reg. No.

CST

ESI Reg. No.

: _______________________________________________

: _______________________________________________

: _______________________________________________

: _______________________________________________

E-15-091-M&M-A.S.-AGREEMENTSignature and Seal

of 38

Update: 17-08-2015, 05:26 PM

Name of Firm : M/s._____________________________________________________Contact Nos. : ________________________ Person : ________________________DD Amt. : ________________________ DD No. : ________________________DD Date : ________________________ Bank : ________________________

Whichever your choice of Lots please select by marking DateTime:

Sr.No. Lot No. Lot No. Lot No. Lot No.

1 K-2 I-20 N-51-B N-1042 N-1 I-30 K-24 K-233 I-6 N-2 N-14 I-184 K-13 N-24 I-32 K-175 K-3 I-17 N-89 N-456 N-37 N-16 N-90 N-77 I-12 K-28 N-32 K-168 K-6 N-15 N-30 I-279 N-8 I-1 N-31 I-1010 K-4 I-3 I-39 N-1311 K-5 K-8 N-65 K-1812 N-28 N-3 I-59 N-1013 N-29 I-11 I-60 N-2314 N-18 N-43 N-111 K-2115 N-22 K-42 I-65 K-2216 N-34 I-40 I-66 K-1117 N-50 K-41 I-68 I-5218 K-7 K-38 N-40 N-1119 N-17 N-19 I-67 I-720 I-26 K-29 K-63 K-2021 K-9 N-55 K-26# K-1022 N-4 I-62 K-25# N-2023 I-21 I-63 N-8624 K-5225 N-626 N-4927 K-3728 I-1429 I-5130 N-8431 K-3432 K-3633 N-8734 N-88

Participation Fee Rs.300000/-P.Day




11:00 To 12:30 11:00 To 12:3011:00 To 12:30 11:00 To 12:30

Mobile No. on which Login ID/Password to be informed:| __|__|__|__|__|__|__|__|__|__|

07-Sep-15

Bidders will be issued single login ID & password for all their registered lots.*AUTO EXTENSION: If any bid registered in the last 3 Minutes that Particular Lots Only will beextended. This extension of 3 minutes will be given till the bid is getting registered. If no bid registeredin the last 3 minutes lot will be automatically closed.

BIDDER PARTICIPATION DETAILS

04-Sep-15 05-Sep-1503-Sep-15


of 38

Update: 17-08-2015, 05:26 PM

1

2

3

4

5

6

7

8

9

10

All the information pertaining to weights, condition etc, which has been mentioned in theAuction Catalogue by KRAPL, is to the best of its knowledge to facilitate the bidding. Thebidding basis is as mentioned in the Catalogue and for the items are on an “as is where is”and "no complaints" basis. The Bidder is deemed to have inspected and satisfied himselfabout the Quality, quantity and location of the items being Auctioned.

The bidder Authorizes KRAPL to confiscate the bidder participation fee in case the EMD is notmade as defined. KRAPL reserves the right to offer the lot in this case to the next highestbidder. Bidder agrees to honour his bids, if offered the material within the bid validity period.Failure to do so will entail forfeiture of the bidder's deposit & EMD if paid.

The bidder has paid the refundable bidder deposit of Rs. _______________ towardsactivation of the login ID and password to enable bidding. The payment details are as under:DD no. __________ dated ____________ drawn on bank _______________ payable asapplicable. (The bidder deposits will carry no interest on it.). The last date for acceptingparticipation fee/ registration is 28-08-2015 upto 5:00 p.m. only. No participationfee/ registration will be accepted after this date & timing.The buyer agrees to accept the Login ID and Password issued to him 1day prior to theAuction. And that he has read and understood the bidding process on thewww.krauctioneers.in platform. And that it would be his responsibility incase he does notprefer to change the password upon receipt.On winning the lot in the Auction, the winning bidder confirms that the EMD, as defined andinstructed in the Auction catalogue shall be made.

The bidder hereby confirms that the refund of the deposit should be made in the name of thecompany as mentioned above.The bidding amount against the Login ID allocated to the bidder is captured accurately in thesoftware system during the bidding process. The record of each bid is maintained by KRAPL.In event of any doubts arising after the Auction event, the software record shall be treated asfinal.

The bidder has read and understood the e-Auction catalogue for the same onwww.krauctioneers.in, Points to Note, Inspection and Contact Particulars, Payment Terms,General Terms & Conditions, detailing of the material to be Auctioned, the lotting, the basisof bidding, the bidding procedure, Lifting Requirement.

The bidder confirms compliance to the procedure of the balance payment to be made toSeller as defined in the Auction catalogue terms and conditions.

Bidder agrees to compensate to M&M/ KRAPL the loss in transactions it may suffer incase ofbackout/ non performance by the bidder to the terms and conditions of this agreement.

The “BIDDER” & "KRAPL" shall be known individually as “Party” & collectively as “Parties”M/s. ____________________________________ (Hereafter referred to as “Bidder”)

AND

Purpose:The purpose of this agreement is to confirm that the “BIDDER” is authorized to bid on theAuction being conducted by KRAPL’s KRAuctioneers marketplace for saleable material of"Seller": Mahindra & Mahindra Ltd, Mumbai. (Hereafter referred to as "M&M")For this purpose the parties confirm the following:

Kisan Ramchandra Auctioneers Pvt. Ltd., (Hereafter referred to as “KRAPL”.)

BIDDER AGREEMENTE-Auction No.: E-15-091E-Auction on Behalf of

Mahindra & Mahindra Limited, Automotive Sector, Kandivli, Nashik & Igatpuri Plant

This Agreement is signed on __________ (“Effective Date”) by and between :


of 38

Update: 17-08-2015, 05:26 PM

11

12

13

14

15

16

17

18

19

20

The bidder understands the rights of bidding for this Auction is reserved. In case of observedirregularities which can affect the bidding process, the bidder will be disabled. KRAPL shallhave final authority in this matter.

KRAPL shall flash important messages during the Auction in the bidding screen. The Bidder isresponsible for seeing and understanding the messages. The bidder for any clarifications canseek KRAPL market-maker’s help on the same. The Auction messages are deemed to be apart of the catalogue.

The bidder has received and accepted the conditions given in the catalogue, issued uponsigning up this Agreement.

ARBITRATION AND JURISDICTION: All disputes and difference arising out of this Auction/ contract shall be referred to the sole arbitration of seller or his nominee and the award ofsuch arbitrator shall be binding on both the parties. The contract shall be subject to thejurisdiction of Mumbai Courts for Kandivli plant, Nashik Courts for Nashik & Igatpuri plantsonly.

The buyer shall have their own ESI & PF code numbers and the buyer will have to cover theiremployees working in the Company for Scrap Loading/ Segregations etc. under ESI/Workmencompensation & PF Schemes.

IMPORTANT NOTE All scrap sale will be on "as is where is" basis from the respectiveplants located in the state of Maharashtra and applicable VAT @ 5% or 12.5% under theMaharashtra Value Added Tax Act, will be charged. No 'C' Forms will be accepted fromout state parties.

IMPORTANT NOTE: FOR ALL THE HAZARDOUS ITEMS, BUYERS ARE REQUIRED TOPROVIDE AUTHORISED TRANSPORTERS VEHICLE AS PER MPCB RULES. THIS ISMANDATORY AND COMPULSORY. WITHOUT AUTHORISED VEHICLE, DELIVERY WILLNOT BE GIVEN. All such party should submit Form 13 to MPCB/SPCB AuthorityOnline which is received from the company. For this they should have registrationwith MPCB/SPCB.

Kisan Ramchandra Auctioneers Pvt. Ltd. (KRAPL) runs its business on the basis of arobust System. KRAPL has outsourcing server space from third party hostingcompany & hence will ensure the smooth running in all good faith & intention.However KRAPL shall not be responsible for any failure of POWER, NETWORK,SERVER, HOSTING SERVER, INTERNET CONNECTIVITY, ISP or otherwise either atBidder’s end or at KRAPL. However, KRAPL encourages the bidder to immediatelyget in touch with KRAPL and report the problem, during the bidding, to request forany help

The Bidder shall be bidding on the basis of the commercial terms as mentioned in the AuctionCatalogue.

KRAPL reserves the right to alter and inform the contents of the Catalogue before the start ofthe Auction. The Catalogue posted on www.krauctioneers.in, during the Auction Period wouldbe treated as the final one. The bidder shall be responsible for checking the catalogue for anyupdates as might arise prior to the start of the Auction.

The bidder is hereby legally bound to have accepted the price as per the bid in the softwarerecord maintained by KRAPL. If approached by KRAPL as the winning bidder, the bidder shallhonour the EMD procedure.


of 38

Update: 17-08-2015, 05:26 PM

COMPANY SEAL/STAMP

: M/s. ___________________________________________Contact Mobile nos. : |0|___|___|___|___|___|___|___|___|___|___|

Authorized Person & Signature : ________________________ _______________________

Date: : __________________________

Name of Firm:AGREEMENT SIGNED BY

I have read & understood the Description of the material & the Terms & Conditionsof e-Auction Sale & only after understanding all the clauses I am signing thisAGREEMENT.

# Please Read Carefully Sperical Terms & Conditions for Lot No. K-25 & K-26.1) For registration of Lot No. K-25 & K-26, the bidder should submit following documents at the time of registration only-a) Pan Card copy duly signb) VAT / Excise registration certificate detailsc) Labour Insurance copy / ESI registration copyd) Number of labours engaged for this activity with complete list e) PF membership and details thereoff) Logistics arrangements: Vehicle Registration Nos. (every day 4 to 5 trucks or as per company requirement)g) Safety : Details of personal protective equipment for loading workh) Details of Supervisor

All the above referred documents are mandatory and compulsory before entering into the e-auction.2) The participation fee amount for both these lots jointly will be Rs. 5 lakhs.3) No single lot can be participated and bidders are required to register for these 2 lots jointly.4) This participation fee of Rs. 5 lakhs will be converted into EMD on finalization of lots. If 10% EMD exceeds Rs. 5 lakhs then the differential amount has to be paid by the party while collecting the contract copy. This is to be paid within 3 days from the decision of the company failing which participation fee will be forfeited.5) If the H1 party fails to honour the contract after finalization then this Rs. 5 lakhs participation fee will be forfeited.


of 38

e-15-091-m&m-a.s.-t&c update: 17-08-2015, 05:26...

Documents