dymaxrail tools and machinesdymax miningdymaxmedia.com/files/catalogs/mining.catalog.lowres… ·...
TRANSCRIPT
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
1Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
COVER
2 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
TABLE OF CONTENTS
TABLE OF CONTENTS
A Century of Commitment to Our Customers 3
Conversion Tables 4
Machine Class 5
ROK·GÄARD™ Chromium Carbide Armor Superior Wear Protection 6-7 ROK·GÄARD™ Severe-Duty Buckets - Excavators/Shovel 8-9
ROK·GÄARD™ U-Blades - Track Dozer 10-11
Track and Wheel Dozer SectionU-Blades for Track and Wheel Dozers
Coal U-Blades for stockpile coal pushing 12
Heavy-Duty U-Blades for demanding workloads 13
Reclamation U-Blades for oversize earth moving 14
Semi U-Blades for Track and Wheel Dozers 15
Semi U-Blades for rock, grading and road-building applications
Centermax™ Blades for Track Dozers 16
Centermax™ Blades for constant material flow in wet sticky mud and clay
Coal Scoops for Wheel Dozers 17
Cushion Dozer blade groups for outside mounted push groups
Coal Bowldozers for Track and Wheel Dozers 18
Coal Bowldozers for hopper feeding, maximum load retention and longer push distances
Success Story - 30,000-Hour Dozer Blade Life 19Wheel Loader Section Quick Coupler Systems
Heavy-Duty Horizontal Pin Lock Quick Coupler 20
Block Handling Quick Coupler systems 20
Success Story - Specialty Coupler System with 180° Rotation 21Large Loader Work Tools
Spade-Nose Rock Buckets 22-23
Coal Buckets 24-25
Side Dump - Two-Way Dump Buckets 26
Skeleton Rock Buckets 27
Material Handling Booms 28
Heavy-Duty Fork Systems with and without hydraulic adjusting tines 29
Block Handling Forks 30
Success Story - Conveyor Belt Shear 31 Excavator/Shovel Section Rock/Mass Excavation Buckets (Backhoe - 120 Ton - 350 Ton) 32-33
Hydraulic Bottom Dump Buckets (Shovels) 34
Engineer-to-Order Products - Custom Solutions 35
Mining Machinery Parts Grapples - Safety First 36
Handle large pins, clevis’, chains, ropes and other shovel and dragline parts
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
3Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
A CENTURY OF COMMITMENT
GENERATIONS
135-Year Family Tradition
In the early days, it was as simple as repairing wagons, shoeing horses and performing simple blacksmithing tasks in and around the small community of Wamego, Kansas. As times evolved, so did machines and so did we. But one thing remained the same - our family tradition of providing the highest-quality, best-engineered solutions to meet our customers’ needs.
Flash back...to the 1930’s, 40’s and 50’s. Depression, World War, Elvis. Our family began building dozer blades for early track-type tractor machines. During those early years, we supplied hundreds of blades to the Korean War that were used for building roads and landing strips. Our dozer blades helped pave the way for the new interstate highway system project in the 1950’s. By the 1960’s and 1970’s, we began building oversized U-Blades for applications such as coal-fired power plants and mined land reclamation.
As time went on, so did we. In March 1997, we purchased Dymax and began rebuilding the company based on our experience throughout the 20th century. Today, a new generation is born.
We Listen and We Care!
In 2001, Dymax developed the conveyor belt shear for cutting old steel corded belting at a Texas mine site. The shear featured a built-in feed roller that enabled operators to cut the belt in 20 seconds compared to the 15 to 20 minutes it took them when using hand saws weighing a cumbersome 80 pounds.
In 2002, Dymax built its second-generation Coal U-Blade. We went back to our roots. Since that time, we’ve produced many custom dozer blades for use around the world.
In 2004, we began building large Rock Buckets for large loaders and worked with a major machine manufacturer providing rock, coal buckets and dozer blades.
In 2010 and 2011, we developed the pin handling systems with a world mining company to provide a safer environment for its employees, and we introduced ROK·GÄARD™ Chromium Carbide wear products.
We look forward to working with you!
Old Balderson shop, downtown Wamego, Kansas, 1950’s. Courtesy Willard Balderson photo archives
Neil and John Balderson circa 1910
Dymax products are proudly built in the United States.
4 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
CONVERSION TABLES
DYMAXMINING.COM
Multiply Metric Unit by To Obtain English Unit
Size/Dimensions/Capacity
cubic meter (capacity) 1.308 cubic yard (capacity)millimeter (mm) 0.3937 inch (in)kilogram (kg) 2.205 pound (lb)
Hydraulics
liters per minute (LPM) .2642 gallons per minute (GPM) (flow)bar 14.5 pounds per square inch (PSI) (pressure)kilopascal .145 pounds per square inch (PSI) (pressure)
Multiply English Unit by To Obtain Metric Unit
Size/Dimensions/Capacity
cubic yard (capacity) 0.7645 cubic meter (capacity)inch (in) 25.4 millimeter (mm)pound (lb) 0.4536 kilogram (kg)
Hydraulics
gallons per minute (GPM) (flow) 3.785 liters per minute (LPM)pounds per square inch (PSI) (pressure) 0.0689 barpounds per square inch (PSI) (pressure) 6.89 kilopascal
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
5Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
MACHINE CLASS
Type Brand Model Type Class Size Class
Wheel Loader
Case 1221 WL 90
Caterpillar 980988990992993994
WLWLWLWLWLWL
90100110120125130
Doosan 500 WL 90
Hyundai 780 WL 90
John Deere 844 WL 90
Kawasaki 95Z115Z135Z
WLWLWL
90100110
Komatsu WA500WA600WA700WA800WA900
WA1200
WLWLWLWLWLWL
90100110120120130
Letourneau L950L1850
WLWL
120130
Volvo L220L330
WLWL
90100
Track Dozer
Caterpillar D6D7D8D9
D10D11
TDTDTDTDTD TD
102030405060
Deere 750850950
1050
TDTDTDTD
10102030
Komatsu D65D85
D155D275D375D475
TDTDTDTDTDTD
102030405060
Type Brand Model Type Class Size Class
Wheel Dozer
CaterpillarTiger
824834
844/590690854
WDWDWDWDWD
1020304050
Komatsu WD600 WD 20
Kawasaki 95Z115Z135Z
WDWDWD
102030
Excavator/Mining Excavator/Shovel
Caterpillar 345365
374/5385390
508051305230
HXHXHXHXHX
MHXMHXMHX
45T65T85T85T85T
120T200T250T
Deere 870 HX 85T
Hitachi 450650870
110012001800190025003500
HXHXHX
MHXMHXMHXMHXMHXMHX
45T65T85T
120T120T200T200T250T350T
Hyundai 450/500800
1200
HXHX
MHX
45T85T
120T
Komatsu PC800PC1250PC2000PC3000
HXMHXMHXMHX
85T120T200T300T
Liebherr 974984
9250
HXHX
MHX
75T85T
250T
Linkbelt 800 HX 85T
MACHINE CLASS
6 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
ROK·GÄARD™ CHROMIUM CARBIDE ARMOR BLADES AND BUCKETS
ROK·GÄARD™ Armor covers entire moldboard face
ROK·GÄARD™ Armor exterior side wear plates
ROK·GÄARD™ Side-cutter Protection
• Dymax introduces ROK·GÄARD™ Chromium Carbide Armor.
• ROK·GÄARD™ involves the fusion of chromium carbide with wear-resistant steels to produce a superior liner system for blades and buckets operating in the toughest mining conditions.
• ROK·GÄARD™ features a significantly higher Rockwell hardness than Hardox 400 or Hardox 500, and much higher measurement from the ASTM G65 abrasion-resistance test.
• Users of Dymax ROK·GÄARD™ U-blades in the mining regions of Northern Canada report up to 20,000 hours of blade wear life.
• The unique combination of chromium and carbide in ROK·GÄARD™ produces an exceptionally long life while simultaneously delivering a smooth and shiny surface, once the initial coat of paint is worn.
• The ROK·GÄARD™ surface works exceptionally well in wet, clay materials in reducing the inherent problem of material sticking inside buckets.
• Let Dymax quote you a NEW Bucket or Blade with the best abrasion-resistant wear plates in the market - ROK·GÄARD™ Chromium Carbide Armor!
ROK·GÄARD™ Armor covers inside moldboard and interior side plates
ROK·GÄARD™ ARMOR
LET DYMAX ROK·GÄARD™ YOUR NEW BLADES AND BUCKETS
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
7Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
DYMAX ROK·GÄARD™ CHROMIUM CARBIDE WEAR PLATE
Armor Plate Your Bucket, Blade or Haul Truck
You can make your investment last longer by using Dymax ROK·GÄARD™ Chromium Carbide Armor. Dymax ROK·GÄARD™ is available in pre-fabricated plate assemblies.
Plates can be cut at your job site and then bent to match your liner needs. (Access to a 500T press brake will accomplish this using templates created on site.) Use only the recommended weld wire to adhere the plates to your blade, bucket or truck liner. Weld it and forget it. ROK·GÄARD™ is your long-term solution.
ROK·GÄARD™ Wear Plate Size ft (m)
Model #Overlay
Thicknessin (mm)
Base Plate Thickness
in (mm)
Total Plate Thickness
in (mm)
5x10 (1.5x3.0) DX-WPL-CC-0.25x0.25-DYMAX-RKG 1/4 (6.35) 1/4 (6.35) 1/2 (12.7)
5x10 (1.5x3.0) DX-WPL-CC-0.25x0.38-DYMAX-RKG 1/4 (6.35) 3/8 (9.65) 5/8 (16.0)
5x10 (1.5x3.0) DX-WPL-CC-0.38x0.25-DYMAX-RKG 3/8 (9.65) 1/4 (6.35) 5/8 (16.0)
5x10 (1.5x3.0) DX-WPL-CC-0.38x0.38-DYMAX-RKG 3/8 (9.65) 3/8 (9.65) 3/4 (19.0)
5x10 (1.5x3.0) DX-WPL-CC-0.38x0.50-DYMAX-RKG 3/8 (9.65) 1/2 (12.7) 7/8 (22.2)
Finishing Welding Wire DX-WRE-CC-DYMAX-RKG Sold as complete wire spools for wire feed welders
PLS Call
ROK·GÄARD™ ARMOR
8 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
ROK·GÄARD™ BUCKETS
ROK·GÄARD™ SEVERE DUTY BUCKETS - EXCAVATORS/SHOVELS
Dymax ROK·GÄARD™ Severe Duty Buckets
for Hydraulic Excavators are top-notch. Don’t settle for those standard OEM offerings when your applications demand a certain toughness. Dymax ROK·GÄARD™ Severe Duty Buckets deliver the highest-wear service life and can be custom-built to match your applications.
Standard Features
ROK·GÄARD™ chromium carbide plating installed on complete bucket interior (moldboard and side plates)
ROK·GÄARD™ chromium carbide plating installed on complete underside exterior of bucket
Includes weld-on adapters and tips
AR400/Hardox 400 side cutters with ROK·GÄARD™ carbide armor overlay on front side of cutter bar
Exterior ROK·GÄARD™ side wear plates
Optional Features
Weld-on or mechanically attached lip shrouds and weld-on radius heel shrouds, white iron wear blocks and chocky bars
Weld-on or mechanically attached side bar protectors
ROK·GÄARD™ carbide overlay is fused to the leading side-cutter edge. Optional weld-on or mechanically attached side bar protectors available upon request are fitted over the carbide overlay.
Wear PlatesROK·GÄARD™ armor plating covers entire bucket assembly bottom, doubling and sometimes tripling life in certain applications compared to 400-type steels.
Side WearROK·GÄARD™ armor plating covers heel region. Optional weld-on cast heel shrouds available upon request.
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
9Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
MODELS AND SPECS
ROK·GÄARD™ ARMOR
Dymax Model # Description / Width x Capacity (in x cyd - m x m3) Weight lb
Weightkg
DX-BK-RK-30x1.13-HX-36T Bucket, Rock ROK·GÄARD™ (30 x 1.13 - 0.76 x 0.86) 3650 1656
DX-BK-RK-36x1.38-HX-36T Bucket, Rock ROK·GÄARD™ (36 x 1.38 - 0.91 x 1.06) 3800 1724
DX-BK-RK-42x1.75-HX-36T Bucket, Rock ROK·GÄARD™ (42 x 1.75 - 1.07 x 1.34) 4000 1814
DX-BK-RK-48x2.25-HX-36T Bucket, Rock ROK·GÄARD™ (48 x 2.25 - 1.22 x 1.72) 4250 1928
DX-BK-RK-54x2.50-HX-36T Bucket, Rock ROK·GÄARD™ (54 x 2.50 - 1.37 x 1.91) 4600 2087
ROK·GÄARD™ Plating Details for 36T buckets: Interior: 1/8 on 1/4 Exterior Side: 1/8 on 1/4 Exterior: 3/8 on 3/8
DX-BK-RKRG-30x1.63-HX-45T Bucket, Rock ROK·GÄARD™ (30 x 1.63 - 0.76 x 1.25) 4500 2041
DX-BK-RKRG-42x1.88-HX-45T Bucket, Rock ROK·GÄARD™ (42 x 1.88 - 1.07 x 1.44) 4800 2177
DX-BK-RKRG-48x2.25-HX-45T Bucket, Rock ROK·GÄARD™ (48 x 2.25 - 1.22 x 1.72) 5350 2427
DX-BK-RKRG-54x3.00-HX-45T Bucket, Rock ROK·GÄARD™ (54 x 3.00 - 1.37 x 2.29) 5900 2676
DX-BK-RKRG-60X3.25-HX-45T Bucket, Rock ROK·GÄARD™ (60 x 3.25 - 1.53 x 2.48) 6400 2903
DX-BK-RKRG-72x3.38-HX-45T Bucket, Rock ROK·GÄARD™ (72 x 3.38 - 1.83 x 2.58) 6190 2808
DX-BK-RKRG-72x2.86-HX-45T Bucket, Rock ROK·GÄARD™ (72 x 2.86 - 1.83 x 2.19) 5660 2567
DX-BK-RKRG-84x3.90-HX-45T Bucket, Rock ROK·GÄARD™ (84 x 3.90 - 2.13 x 2.98) 7000 3175
ROK·GÄARD™ Plating Details for 45T buckets: Interior: 1/8 on 1/4 Exterior Side: 1/8 on 1/4 Exterior: 3/8 on 3/8
DX-BK-RKRG-54X2.25-HX-65T Bucket, Rock ROK·GÄARD™ (54 x 2.25 - 1.38 x 1.72) 6100 2767
DX-BK-RKRG-72x4.50-HX-65T Bucket, Rock ROK·GÄARD™ (72 x 4.50 - 1.83 x 3.44) 8800 3992
DX-BK-RKRG-78x4.50-HX-65T Bucket, Rock ROK·GÄARD™ (78 x 4.50 - 1.98 x 3.44) 9000 4082
ROK·GÄARD™ Plating Details for 65T buckets: Interior: 1/8 on 1/4 Exterior Side: 1/8 on 1/4 Exterior: 3/8 on 3/8
DX-BK-RKRG-36x2.70-HX-85T Bucket, Rock ROK·GÄARD™ (36 x 2.70 - 0.91 x 2.06) 6800 3084
DX-BK-RKRG-42x3.30-HX-85T Bucket, Rock ROK·GÄARD™ (42 x 3.30 - 1.07 x 2.52) 7800 3538
DX-BK-RKRG-48x3.90-HX-85T Bucket, Rock ROK·GÄARD™ (48 x 3.90 - 1.22 x 2.98) 8400 3810
DX-BK-RKRG-54x4.60-HX-85T Bucket, Rock ROK·GÄARD™ (54 x 4.60 - 1.37 x 3.52) 9900 4491
DX-BK-RKRG-84x4.90-HX-85T Bucket, Rock ROK·GÄARD™ (84 x 4.90 - 2.13 x 3.75) 10800 4899
DX-BK-RKRG-91x6.25-HX-85T Bucket, Rock ROK·GÄARD™ (91 x 6.25 - 2.31 x 4.78) 12500 5670
ROK·GÄARD™ Plating Details for 85T buckets: Interior: 1/8 on 1/4 Exterior Side: 1/4 on 1/4 Exterior Bottom : 3/8 on 3/8
DX-BK-RKRG-84x6.80-HXM-120T Bucket, Rock ROK·GÄARD™ (84 x 6.80 - 2.13 x 5.20) 14250 6464
DX-BK-RKRG-88x7.60-HXM-120T Bucket, Rock ROK·GÄARD™ (88 x 7.60 - 2.24 x 5.81) 15800 7167
DX-BK-RKRG-94x8.80-HXM-120T Bucket, Rock ROK·GÄARD™ (94 x 8.80 - 2.39 x 6.73) 18410 8351
ROK·GÄARD™ Plating Details for 120T buckets: Interior: 1/8 on 1/4 Exterior Side: 1/4 on 1/4 Exterior Bottom: 3/8 on 3/8
DX-BK-RKRG-108x12.60-HXM-200T Bucket, Rock ROK·GÄARD™ (108 x 12.60 - 2.74 x 9.63) 29500 13381
DX-BK-RKRG-132x15.70-HXM-200T Bucket, Rock ROK·GÄARD™ (132 x 15.70 - 3.35 x 12.00) 31800 14424
ROK·GÄARD™ Plating Details for 200T buckets: Interior: 1/8 on 1/4 Exterior Side: 3/8 on 3/8 Exterior Bottom: 3/8 on 3/8
PLS 401
10 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
ROK·GÄARD™ DOZER BLADES
ROK·GÄARD™ U-BLADES - TRACK DOZER
Dymax ROK·GÄARD™ U-Blades
in some applications will triple blade life. Dymax ROK·GÄARD™ U-Blades feature standard 28° wing angles and come armor plated ready for work. Includes all machine mounting ears and bushings, trunnions are used where applicable for fitting factory push group arrangements.
Standard Features
ROK·GÄARD™ chromium carbide plating installed on entire moldboard in eight-piece pattern. All seams are full weld filled/ROK·GÄARD™ final pass weld
ROK·GÄARD™ chromium carbide plating installed on exterior heel plate and side plate region
Includes replaceable bolt-on cutting edges - OEM pattern
AR400/Hardox 400 side cutters with replaceable side bar protectors
Optional Features
White iron wear blocks and chocky bars
Reclamation Blade - ROK·GÄARD™ in some applications can triple blade life.
Side CuttersROK·GÄARD™ carbide overlay is fused to the side-cutter edge. Optional weld- on or mechanically attached side bar protectors available upon request.
ROK·GÄARD™ LinedLonger-lasting performance.Up to four times better wear resistancecompared to traditional 400 and 500 wear plating.
Vertical Slat Guard installed on all ROK·GÄARD™ HDU moldboards. Reclamation models feature solid moldboard (no vertical slat guarding).
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
11Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
MODELS AND SPECS
ROK·GÄARD™ ARMOR
Dymax Model # Description/Capacity x Width (cyd x ft - m3 x m) Weight lb
Weightkg
ROK·GÄARD™ Heavy-Duty U-Blades
DX-BL-HDURG-20.00x14ft-TD-30 Blade, Heavy Duty U ROK·GÄARD™ (20.00 x 14 - 15.29 x 4.27) 9680 4391
DX-BL-HDURG-22.50x16ft-TD-40 Blade, Heavy Duty U ROK·GÄARD™ (22.50 x 16 - 17.20 x 4.88) 14500 6577
DX-BL-HDURG-28.80x17ft-TD-50 Blade, Heavy Duty U ROK·GÄARD™ (28.80 x 17 - 22.02 x 5.18) 17800 8074
DX-BL-HDURG-45.00x21ft-TD-60 Blade, Heavy Duty U ROK·GÄARD™ (45.00 x 21 - 34.40 x 6.40) 32000 14515
ROK·GÄARD™ Reclamation U-Blades
DX-BL-RCRG-22.00X16ft-TD-30 Blade, Reclamation ROK·GÄARD™ (22.00 x 16 - 16.82 x 4.88) 9800 4445
DX-BL-RCRG-30.00x17ft-TD-40 Blade, Reclamation ROK·GÄARD™ (30.00 x 17 - 22.94 x 5.18) 14500 6577
DX-BL-RCRG-40.00x19ft-TD-50 Blade, Reclamation ROK·GÄARD™ (40.00 x 19 - 30.58 x 5.79) 17500 7938
DX-BL-RCRG-60.00x21ft-TD-60 Blade, Reclamation ROK·GÄARD™ (60.00 x 21 - 45.87 x 6.40) 29500 13381
DX-BL-RCRG-66.00x22ft-TD-60 Blade, Reclamation ROK·GÄARD™ (66.00 x 22 - 50.46 x 6.71) 31600 14333
DX-BL-RCRG-68.00x24ft-TD-60 Blade, Reclamation ROK·GÄARD™ (68.00 x 24 - 51.99 x 7.32) 32500 14742
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For capacities and widths not listed,please contact Dymax sales for more information. All Dymax products are available to meet your requirements through our custom products group.
PLS 402, 403
12 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
Dymax Coal U-Blades
for Track and Wheel Dozers are built upon a family heritage that dates back to the 1960’s. Our family pioneered the use of large oversized U-blades for pushing stockpiled coal. Available for all brands of machines, Dymax Coal U-Blades feature the highest quality.
TRACK/WHEEL DOZERS
Dymax Model # Description/Capacity x Width (cyd x ft - m3 x m) Weight lb
Weight kg
Wheel Dozer Models
DX-BL-CL-21.00x16ft-WD-10 Blade, Coal (21.00 x 16 - 16.06 x 4.88) 8000 3629
DX-BL-CL-29.00x19ft-WD-20 Blade, Coal (29.00 x 19 - 22.17 x 5.79) 11000 4989
DX-BL-CL-40.00x20ft-WD-30 Blade, Coal (40.00 x 20 - 30.58 x 6.10) 16000 7257
DX-BL-CL-50.00x22ft-WD-40 Blade, Coal (50.00 x 22 - 38.23 x 6.71) 19150 8686
DX-BL-CL-65.00x23ft-WD-50 Blade, Coal (65.00 x 23 - 49.70 x 7.01) 20500 9299
DX-BL-CL-70.00x23ft-WD-50 Blade, Coal (70.00 x 23 - 53.52 x 7.01) 21500 9752
Track Dozer Models
DX-BL-CL-12.50x14ft-TD-10 Blade, Coal (12.50 x 14 - 9.56 x 4.27) 3500 1588
DX-BL-CL-22.00x16ft-TD-20 Blade, Coal (22.00 x 16 - 16.82 x 4.88) 5500 2495
DX-BL-CL-28.80x18ft-TD-30 Blade, Coal (28.80 x 18 - 22.02 x 5.49) 8400 3810
DX-BL-CL-40.00x19ft-TD-40 Blade, Coal (40.00 x 19 - 30.58 x 5.79) 9900 4491
DX-BL-CL-48.00x19ft-TD-40 Blade, Coal (48.00 x 19 - 36.70 x 5.79) 10500 4763
DX-BL-CL-60.00x20ft-TD-50 Blade, Coal (60.00 x 20 - 45.87 x 6.10) 1400 635
DX-BL-CL-68.00x21ft-TD-50 Blade, Coal (68.00 x 21 - 51.99 x 6.40) 14800 6713
DX-BL-CL-90.00x24ft-TD-60 Blade, Coal (90.00 x 24 - 68.81 x 7.32) 24000 10886
DX-BL-CL-98.00x25ft-TD-60 Blade, Coal (98.00 x 25 - 74.93 x 7.62) 25500 11567
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For specialty liners such as stainless steel or capacities and widths not listed, please contact Dymax sales for more information. All Dymax products are available to meet your requirements through our custom products group.
PLS 404
COAL U-BLADES FOR TRACK AND WHEEL DOZERS
Standard Features
Heavy-Duty Rock Guard
Replaceable OEM bolt-on cutting edges and end bits, replaceable side bar protection
28° wing angles
Optional Features
ROK·GÄARD™ Armor Wear Package
Hardox/AR400 and 500 Wear Package
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
13Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
HEAVY DUTY U-BLADES FOR TRACK DOZERS
TRACK/WHEEL DOZERS
Dymax Model # Description/Capacity x Width (cyd x ft - m3 x m) Weight lb
Weight kg
DX-BL-HDU-8.75x11ft-TD-10 Blade, Heavy Duty U (8.75 x 11 - 6.69 x 3.35) 4600 2087
DX-BL-HDU-10.00x12ft-TD-10 Blade, Heavy Duty U (10.00 x 12 - 7.65 x 3.66) 6500 2948
DX-BL-HDU-20.00x14ft-TD-30 DX-BL-HDU-LINER.RKG-TD-40 DX-BL-HDU-LINER.400-TD-40DX-BL-HDU-LINER.500-TD-40
Blade, Heavy Duty U (20.00 x 14 - 15.29 x 4.27) Blade, Heavy Duty U, ROK·GÄARD™ moldboard liner Blade, Heavy Duty U, Hardox/AR400 moldboard liner Blade, Heavy Duty U, Hardox/AR500 moldboard liner
8900 4037
DX-BL-HDU-22.50x16ft-TD-40DX-BL-HDU-LINER.RKG-TD-50DX-BL-HDU-LINER.400-TD-50DX-BL-HDU-LINER.500-TD-50
Blade, Heavy Duty U (22.50 x 16 - 17.20 x 4.88)Blade, Heavy Duty U, ROK·GÄARD™ moldboard linerBlade, Heavy Duty U, Hardox/AR400 moldboard linerBlade, Heavy Duty U, Hardox/AR500 moldboard liner
12500 5670
DX-BL-HDU-28.80x17ft-TD-50 Blade, Heavy Duty U (28.80 x 17 - 22.02 x 5.18) 15800 7167
DX-BL-HDU-45.00x21ft-TD-60DX-BL-HDU-LINER.RKG-TD-60
Blade, Heavy Duty U (45.00 x 21 - 34.40 x 6.40)Blade, Heavy Duty U, ROK·GÄARD™ moldboard liner 29600 13426
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For capacities and widths not listed, please contact Dymax sales for more information. All Dymax products are available to meet your requirements through our custom products group.
PLS 405
Standard Features
Heavy-Duty Top Rack
Replaceable OEM bolt-on cutting edges and teardrop end bits, replaceable side bar protection
28° wing angles
Optional Features
ROK·GÄARD™ Armor Wear Package
Hardox/AR400 and 500 Wear Package
Designed for severe-duty applications with AR400, AR500 or ROK·GÄARD™ wear plates. Features top rack and cylinder guards. Wing angles 28° to 30° to increase penetration capability, and teardrop end bits allow quicker digging to fill the blade.
Dymax Heavy Duty U-Blades can be found working in Iceland, Northern Europe, South America, Africa and North America, where they outlast and outperform competing products. In certain applications, when outfitted with Dymax’s exclusive ROK·GÄARD™ Chromium Carbide Armor, you can double your life expectancy and increase your bottom line.
14 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
RECLAMATION U-BLADES FOR TRACK DOZERS
TRACK/WHEEL DOZERS
Dymax Model # Description/Capacity x Width (cyd x ft - m3 x m) Weight lb
Weight kg
DX-BL-RC-10.46x12ft-TD-10 Blade, Reclamation (10.46 x 12 - 8.00 x 3.66) 3800 1724
DX-BL-RC-15.00x14ft-TD-20 Blade, Reclamation (15.00 x 14 - 11.47 x 4.27) 6000 2722
DX-BL-RC-22.00X16FT-TD-30 Blade, Reclamation (22.00 x 16 - 16.82 x 4.88) 8400 3810
DX-BL-RC-30.00x17ft-TD-40DX-BL-RC-LINER.RKG-TD-40DX-BL-RC-LINER.400-TD-40DX-BL-RC-LINER.ARCO-TD-40
Blade, Reclamation (30.00 x 17 - 22.94 x 5.18)Blade, Reclamation, ROK·GÄARD™ moldboard linerBlade, Reclamation, Hardox/AR400 moldboard liner Blade, Reclamation, moldboard liner
11000 4989
DX-BL-RC-40.00x19ft-TD-50DX-BL-RC-LINER.RKG-TD-50DX-BL-RC-LINER.400-TD-50 DX-BL-RC-LINER.500-TD-50DX-BL-RC-LINER.ARCO-TD-50
Blade, Reclamation (40.00 x 19 - 30.58 x 5.79)Blade, Reclamation, ROK·GÄARD™ moldboard linerBlade, Reclamation, Hardox/AR400 moldboard linerBlade, Reclamation, Hardox/AR500 moldboard liner Blade, Reclamation, moldboard liner
15800 7167
DX-BL-RC-60.00x21ft-TD-60DX-BL-RC-66.00x22ft-TD-60DX-BL-RC-68.00x24ft-TD-60DX-BL-RC-LINER.RKG-TD-60 DX-BL-RC-LINER.400-TD-60DX-BL-RC-LINER.500-TD-60
Blade, Reclamation (60.00 x 21 - 45.87 x 6.40)Blade, Reclamation (66.00 x 22 - 50.46 x 6.71)Blade, Reclamation (68.00 x 24 - 51.99 x 7.32)Blade, Reclamation, ROK·GÄARD™ moldboard linerBlade, Reclamation, Hardox/AR400 moldboard linerBlade, Reclamation, Hardox/AR500 moldboard liner
25,30027,00028,500
11476 1224712927
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For capacities and widths not listed, please contact Dymax sales for more information. All Dymax products are available to meet your requirements through our custom products group.
PLS 406
A Dymax Reclamation U-Blade can increase your production rates and maximize your bottom line. Compared to standard conventional moldboards, the Dymax Reclamation U-Blade can increase production up to 25% and can also be equipped with special wear packages to outlast those factory blade groups.
Ideal for slot dozing and general reclamation found throughout the coal mining industry.
Standard Features
Replaceable OEM bolt on cutting edges and end bits
30-degree wing angles
Heavy-duty triple box beam construction
Set up with OEM bushings, trunnions where applicable
Optional Features
ROK·GÄARD™ Armor Wear Package
Hardox/AR400 and 500 Wear Package
Replaceable side cutter bar wear protection
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
15Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
SEMI U-BLADES FOR TRACK AND WHEEL DOZERS
TRACK/WHEEL DOZERS
Dymax Model # Description/Capacity x Width (cyd x ft - m3 x m) Weight lb
Weight kg
Wheel Dozers
DX-BL-SU-24.90x20ft-WD-30 Blade, Semi-U (24.90 x 20 - 19.04 x 6.10) 11000 4989
DX-BL-SU-30.00x21ft-WD-40 Blade, Semi-U (30.00 x 21 - 22.94 x 6.40) 16500 7484
DX-BL-SU-35.00x21ft-WD-50 Blade, Semi-U (35.00 x 21 - 26.76 x 6.40) 17500 7938
Track Dozers
DX-BL-SU-7.50x11ft-TD-10 Blade, Semi-U (7.50 x 11 - 5.73 x 3.35) 3100 1406
DX-BL-SU-7.80x12ft-TD-20 Blade, Semi-U (7.80 x 12 - 5.96 x 3.66) 4000 1814
DX-BL-SU-13.50x14ft-TD-30 Blade, Semi-U (13.50 x 14 - 10.32 x 4.27) 7500 3402
DX-BL-SU-17.70x14ft-TD-40 Blade, Semi-U (17.70 x 14 - 13.53 x 4.27) 9800 4445
DX-BL-SU-24.20x16ft-TD-50DX-BL-SU-LINER.RKG-TD-50DX-BL-SU-LINER.400-TD-50
Blade, Semi-U (24.20 x 16 - 18.50 x 4.88)Blade, Semi-U, ROK·GÄARD™ moldboard linerBlade, Semi-U, Hardox/AR400 moldboard liner
15500 7031
DX-BL-SU-35.50x19ft-TD-60 DX-BL-SU-36.00x20ft-TD-60DX-BL-SU-LINER.RKG-TD-60DX-BL-SU-LINER.400-TD-60DX-BL-SU-LINER.500-TD-60
Blade, Semi-U (35.50 x 19 - 27.14 x 5.79)Blade, Semi-U (36.00 x 20 - 27.52 x 6.10)Blade, Semi-U, ROK·GÄARD™ moldboard linerBlade, Semi-U, Hardox/AR400 moldboard linerBlade, Semi-U, Hardox/AR500 moldboard liner
2400026000
1088611793
All Dymax Dozer SU-Blades are sized using the SAE J1265 rating. For capacities and widths not listed, please contact Dymax sales for more information. All Dymax products are available to meet your requirements through our custom products group.
PLS 407, 408
Dymax Model # Description/Capacity x Width (cyd x ft - m3 x m) Weight lb
Weight kg
DX-BL-RC-10.46x12ft-TD-10 Blade, Reclamation (10.46 x 12 - 8.00 x 3.66) 3800 1724
DX-BL-RC-15.00x14ft-TD-20 Blade, Reclamation (15.00 x 14 - 11.47 x 4.27) 6000 2722
DX-BL-RC-22.00X16FT-TD-30 Blade, Reclamation (22.00 x 16 - 16.82 x 4.88) 8400 3810
DX-BL-RC-30.00x17ft-TD-40DX-BL-RC-LINER.RKG-TD-40DX-BL-RC-LINER.400-TD-40DX-BL-RC-LINER.ARCO-TD-40
Blade, Reclamation (30.00 x 17 - 22.94 x 5.18)Blade, Reclamation, ROK·GÄARD™ moldboard linerBlade, Reclamation, Hardox/AR400 moldboard liner Blade, Reclamation, moldboard liner
11000 4989
DX-BL-RC-40.00x19ft-TD-50DX-BL-RC-LINER.RKG-TD-50DX-BL-RC-LINER.400-TD-50 DX-BL-RC-LINER.500-TD-50DX-BL-RC-LINER.ARCO-TD-50
Blade, Reclamation (40.00 x 19 - 30.58 x 5.79)Blade, Reclamation, ROK·GÄARD™ moldboard linerBlade, Reclamation, Hardox/AR400 moldboard linerBlade, Reclamation, Hardox/AR500 moldboard liner Blade, Reclamation, moldboard liner
15800 7167
DX-BL-RC-60.00x21ft-TD-60DX-BL-RC-66.00x22ft-TD-60DX-BL-RC-68.00x24ft-TD-60DX-BL-RC-LINER.RKG-TD-60 DX-BL-RC-LINER.400-TD-60DX-BL-RC-LINER.500-TD-60
Blade, Reclamation (60.00 x 21 - 45.87 x 6.40)Blade, Reclamation (66.00 x 22 - 50.46 x 6.71)Blade, Reclamation (68.00 x 24 - 51.99 x 7.32)Blade, Reclamation, ROK·GÄARD™ moldboard linerBlade, Reclamation, Hardox/AR400 moldboard linerBlade, Reclamation, Hardox/AR500 moldboard liner
25,30027,00028,500
11476 1224712927
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For capacities and widths not listed, please contact Dymax sales for more information. All Dymax products are available to meet your requirements through our custom products group.
PLS 406
Standard Features
Replaceable OEM bolt-on cutting edges and end bits
25-degree wing angles
Heavy-duty triple box beam construction
Set up with OEM bushings, trunnions where applicable
Optional Features
ROK·GÄARD™ Armor Wear Package
Hardox/AR400 Wear Package
Replaceable side cutter bar wear protection
Reliable. Tough. Peformance. Dymax Semi U-Blades are ideal for equipping new machinery or replacing worn out factory Semi U-Blades. Like all Dymax dozer blades, Dymax Semi U-Blades are available in custom widths, capacities and heights and can be built to match your application requirements. Dymax Semi U-Blades - dependable, proven and working on multiple continents.
16 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
Dymax Centermax™ Dozer Blades for Track Dozers provide superior load retention, allowing operators to minimize side spills. The conical-shaped moldboard delivers material to the center of the push and maximizes capacity. The Centermax™ Dozer Blade grades like a conventional straight or semi u-blade but delivers greater amounts of material, acting like a U-Blade. Add a stainless steel liner for work in sticky or caustic materials.
CENTERMAX™ BLADES FOR TRACK DOZERS
TRACK/WHEEL DOZERS
Dymax Model # Description/Capacity x Width (cyd x ft - m3 x m) Weight lb
Weight kg
DX-BL-CMAX-7.50x11ft-TD-10 Blade, CenterMax™ (7.50 x 11 - 5.73 x 3.35) 3100 1406
DX-BL-CMAX-9.00x14ft-TD-10 Blade, CenterMax™ (9.00 x 14 - 6.88 x 4.27) 3400 1542
DX-BL-CMAX-7.80x12ft-TD-20 Blade, CenterMax™ (7.80 x 12 - 5.96 x 3.66) 4500 2041
DX-BL-CMAX-11.00x15ft-TD-20 Blade, CenterMax™ (11.00 x 15 - 8.41 x 4.57) 6400 2903
DX-BL-CMAX-13.50x14ft-TD-30 Blade, CenterMax™ (13.50 x 14 - 10.32 x 4.27) 7000 3175
DX-BL-CMAX-15.00x15ft-TD-30 Blade, CenterMax™ (15.00 x 15 - 11.47 x 4.57) 7500 3402
PLS 409
Standard Features
Extended side wings to trap material, almost eliminating side spill
25-degree wing angles
Heavy-duty triple box beam construction
Set up with OEM bushings, trunnions where applicable
Optional Features
Stainless steel liner
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
17Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
COAL SCOOPS FOR WHEEL DOZERS
TRACK/WHEEL DOZERS
Dymax Coal Scoops are built to provide years of productive use and service. Dymax welders take special pride in building each Coal Scoop so that it will exceed customers’ expectations.
Ideal for coal facilities feeding hoppers, Dymax Coal Scoops deliver more material per pass and hold up in around-the-clock operations.
Each model is provided with an H-Frame assembly and Scoop assembly. H-Frames are provided with Scoop dump cylinders and rear H-Frame tilt cylinders. Machine modifications are required for accommodating the Dymax Coal Scoop. Available for all brands of machines. Contact Dymax sales for modifications required for your machine.
Dymax Model # Description/Capacity x Width (cyd x ft - m3 x m) Weight lb
Weight kg
DX-BL-CLSC-35.00x14ft-WD-10 Blade, Coal Scoop (35.00 x 14 - 26.76 x 4.27) 15000 6804
DX-BL-CLSC-50.00x17ft-WD-20 Blade, Coal Scoop (50.00 x 17 - 38.23 x 5.18) 19500 8845
DX-BL-CLSC-60.00x17ft-WD-20 Blade, Coal Scoop (60.00 x 17 - 45.87 x 5.18) 20500 9299
Coal Scoops are provided with H-frame, tipping cylinder rams and the scoop bucket/blade assembly. Machines require modifications. Please contact Dymax sales to determine your machine requirements for operating a Dymax Coal Scoop.
PLS 410
18 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
Retain loads, feed hoppersDymax Bowldozers feature heavy-duty construction and excellent control of the load. With two (2) cutting edges and an open floor, operators can keep a lively load when dozing. The long and high side boards trap the material, similar to “slot-dozing” without the slot.
Dymax Bowldozers were developed by the Balderson family in the early 1960’s. New materials make them more productive than ever.
COAL BOWLDOZERS FOR WHEEL DOZERS
TRACK/WHEEL DOZERS
Dymax Model # Description/Capacity x Width (cyd x ft - m3 x m) Weight lb
Weightkg
DX-BL-BDCL-28.00x15ft-WD-20 Blade, Bowldozer Coal (28.00 x 15 - 21.41 x 4.57) 11880 5389
DX-BL-BDCL-39.00x18ft-WD-30 Blade, Bowldozer Coal (39.00 x 18 - 29.82 x 5.49) 13800 6260
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For capacities and widths not listed, please contact Dymax sales for more information. All Dymax products are available to meet your requirements through our custom products group.
PLS 411
Standard Features
Two-cutting-edge system with open floor
Box construction side boards
Replaceable OEM cutting edges
Set up with OEM bushings, trunnions where applicable
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
19Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
SUCCESS STORY
DYMAX ROK·GÄARD™
Dymax ROK·GÄARD™ Chromium Carbide Armor is the proprietary name for the process used by Dymax to provide the toughest chromium carbide overlay plate for critical abrasion resistance in severe applications. Not all chromium carbide overlay plate is the same. Dymax ROK·GÄARD™ Chromium Carbide Armor is manufactured to Dymax specifications. Dymax engineers utilize their knowledge and decades of experience to make sure that each customer’s ROK·GÄARD™ wear plates match the individual customer applications.
Not all wear materials are equal. Let Dymax help you decide what is right for you.
Is your application one with severe abrasion but sticky material? Or are you working in clay and other wet conditions but face mild wear conditions? Dymax engineers examine these kinds of elements before determining the best wear material for your job. Some situations call for Hardox 400 or Hardox 500. More severe applications require Dymax ROK·GÄARD™ Chromium Carbide Armor. And there are other uses where abrasion is absent and stainless steel liners are the path to improved productivity.
Hardness is Not the Same as Wear Resistance.
Popular hardness measures, such as Brinel and Rockwell, measure the macro hardness of a material. An alloy steel hardness measure becomes the combined average of each metallurgical component in the alloy. Wear resistance is best measured by a wear test such as ASTM G65.
Low stress and/or scratching abrasion is the most predominant test in the mining industry. The ASTM G65 test is a dry sand rubber wheel test. It rates materials in terms of weight loss under a controlled set of laboratory conditions. Obviously, other factors in the mine may influence ultimate wear, such as impacts, corrosion and other elements. Dymax engineers are ready to help you determine what the best wear protection is for your application.
Dymax: The Trusted Source of Wear Plate Expertise
DYMAX ROK·GÄARD™ - SUCCESS
30,000 hours +This Dymax Reclamation U-Blade has clocked just over 30,000 working hours.
20 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
HEAVY DUTY HORIZONTAL PIN LOCK QUICK COUPLERS
BLOCK HANDLING WEDGE LOCK QUICK COUPLERS
Dymax Model # Description Weight lb
Weight kg
DX-QC-HY-DHLP-WL-90 Quick Coupler, Hydraulic, DHLP - Dymax Horiz. Pin Coupler 2500 1134
DX-QC-HY-DHLP-WL-100 Quick Coupler, Hydraulic, DHLP - Dymax Horiz. Pin Coupler 4180 1896
DX-QC-HY-DHLP-WL-110 Quick Coupler, Hydraulic, DHLP - Dymax Horiz. Pin Coupler 6400 2903
DX-QC-HY-DHLP-WL-120 Quick Coupler, Hydraulic, DHLP - Dymax Horiz. Pin Coupler 6400 2903
PLS 412
Dymax Model # Description Weight lb
Weight kg
DX-QC-BH-WG-WL-90 Quick Coupler, Block Handling, Block Handling - Wedge Lock 2250 1021
DX-QC-BH-WG-WL-100 Quick Coupler, Block Handling, Block Handling - Wedge Lock 2900 1315
DX-QC-BH-WG-WL-110 Quick Coupler, Block Handling, Block Handling - Wedge Lock 6000 2722
DX-QC-BH-WG-WL-120 Quick Coupler, Block Handling, Block Handling - Wedge Lock 6000 2722
PLS 413
Dymax Block Handling Quick Couplers for wheel loaders are designed to utilize the maximum lifting and breakout capacity of the given machine.
Equipped with either two or four heavy-duty locking cylinders, the Dymax Block Handling Quick Coupler features heavy-duty construction to provide long life in quarry environments.
Models can be set up with a visibility window to increase operator visibility when handling large rocks and blocks.
Dymax Heavy Duty Horizontal Pin Lock Quick Coupler systems allow mining and quarrying operations to change from bucket to fork to blade in minutes.
Class 90 and Class 100 models feature a 6-inch diameter top tube assembly, while Class 110 and 120 models feature a 9-inch top tube assembly.
Hydraulic kits are sold separately. Contact Dymax for more information and details concerning hydraulic kits.
WHEEL LOADER
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
21Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
SUCCESS STORY
Dymax Model # Description Weight lb
Weight kg
DX-QC-BH-WG-WL-90 Quick Coupler, Block Handling, Block Handling - Wedge Lock 2250 1021
DX-QC-BH-WG-WL-100 Quick Coupler, Block Handling, Block Handling - Wedge Lock 2900 1315
DX-QC-BH-WG-WL-110 Quick Coupler, Block Handling, Block Handling - Wedge Lock 6000 2722
DX-QC-BH-WG-WL-120 Quick Coupler, Block Handling, Block Handling - Wedge Lock 6000 2722
PLS 413
SPECIALTY COUPLER SYSTEMS - GET ONE IF YOU NEED ITDymax engineers are always hard at work developing new technologies and helping customers do jobs more easily, more safely and more economically. In 2011, Dymax developed the all-new 180° rotational coupler system that delivers 90° hydraulic rotation to the left and right.
An application at a copper facility in Pakistan required a special coupler that would allow the customer to dump material to the side using a conventional wheel
loader. The customer was needing to dump material to the side from its specialty boom/fork due to tight space restraints. Dymax was contacted and in 2011 delivered to Pakistan the 180° rotational coupler system. This specific model fit an existing loader and euro-coupler and then was fitted with a manual locking euro-coupler on the front side.
Let us help with your special work tool needs.
22 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
WHEEL LOADER
SPADE NOSE ROCK BUCKETS
Dymax Spade Nose Rock Buckets are known for meeting production requirements at mines while providing years of service. With 4 generations of meeting customer needs, Dymax Spade Nose Rock Buckets are crafted for each customer as if it were our only customer. Dymax engineering matches machine potential to a properly sized bucket for the application and material weight, creating job harmony.
DX-BK-SPDRK-WHIRONOptional white Iron wear blocks
DX-BK-SPDRK-SEGMENTSDX-BK-SPDRK-LSHROUDSOptional cutting edge segments and lip shrouds
DX-BK-SPDRK-SSHROUDSOptional Side Bar Protector Shrouds
DX-BK-SPDRK-LINEROptional AR400, AR500 and ROK·GÄARD™
Weld-On Adapter/TipsStandard feature
Rock Wings/Tire ProtectorsStandard feature
Standard Features
Spade-nose cutting edge equipped with weld-on adapters and tips. Cat, Esco, Hensley and Futura
Includes top auxiliary spill plate/rock guard
Tire protection/exterior Rock Wings
Heavy-duty AR400 side cutters
T1 steel moldboard group without liner
Optional Features
ROK·GÄARD™ Armor Wear Package
Hardox/AR400 Wear Package
Cutting edge segments and lip shrouds
Side bar protector shrouds
White iron wear blocks
Bottom Wear PlatingStandard feature
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
23Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
WHEEL LOADER
MODELS AND SPECS
Dymax Model # Description/Capacity (cyd -m3) Weight lb
Weight kg
DX-BK-SPDRK-6.00cyd-WL-90 Bucket, Spade Nose Rock (6.00 - 4.59) 7660 3474
DX-BK-SPDRK-6.50cyd-WL-90 Bucket, Spade Nose Rock (6.50 - 4.97) 7980 3620
DX-BK-SPDRK-7.00cyd-WL-90 Bucket, Spade Nose Rock (7.00 - 5.35) 8500 3856
DX-BK-SPDRK-LINER.RKG-WL-90DX-BK-SPDRK-LSHROUDS-WL-90DX-BK-SPDRK-SEGMENT-WL-90DX-BK-SPDRK-SSHROUDS-WL-90 DX-BK-SPDRK-WHIRON-WL-90DX-BK-SPDRK-LINER.400-WL-90
Bucket, Spade Nose Rock, ROK·GÄARD™ moldboard linerBucket, Spade Nose Rock, Lip ShroudsBucket, Spade Nose Rock, Cutting edge segmentsBucket, Spade Nose Rock, Side bar protector shroudsBucket, Spade Nose Rock, White iron wear blocksBucket, Spade Nose Rock, Hardox/AR400 moldboard liner
DX-BK-SPDRK-8.00cyd-WL-100 Bucket, Spade Nose Rock (8.00 - 6.12) 10930 4958
DX-BK-SPDRK-8.50cyd-WL-100 Bucket, Spade Nose Rock (8.50 - 6.50) 12275 5568
DX-BK-SPDRK-9.00cyd-WL-100 Bucket, Spade Nose Rock (9.00 - 6.88) 13620 6178
DX-BK-SPDRK-9.50cyd-WL-100 Bucket, Spade Nose Rock (9.50 - 7.26) 13900 6305
DX-BK-SPDRK-LINER.RKG-WL-100DX-BK-SPDRK-LSHROUDS-WL-100DX-BK-SPDRK-SEGMENT-WL-100 DX-BK-SPDRK-SSHROUDS-WL-100DX-BK-SPDRK-WHIRON-WL-100DX-BK-SPDRK-LINER.400-WL-100DX-BK-SPDRK-LINER.500-WL-100
Bucket, Spade Nose Rock, ROK·GÄARD™ moldboard linerBucket, Spade Nose Rock, Lip ShroudsBucket, Spade Nose Rock, Cutting edge segmentsBucket, Spade Nose Rock, Side bar protector shroudsBucket, Spade Nose Rock, White iron wear blocksBucket, Spade Nose Rock, Hardox/AR400 moldboard linerBucket, Spade Nose Rock, Hardox/AR500 moldboard liner
DX-BK-SPDRK-11.00cyd-WL-110 Bucket, Spade Nose Rock (11.00 - 8.41) 16200 7348
DX-BK-SPDRK-12.00cyd-WL-110 Bucket, Spade Nose Rock (12.00 - 9.18) 17600 7983
DX-BK-SPDRK-LINER.RKG-WL-110DX-BK-SPDRK-LSHROUDS-WL-110DX-BK-SPDRK-SEGMENT-WL-110DX-BK-SPDRK-SSHROUDS-WL-110DX-BK-SPDRK-WHIRON-WL-110DX-BK-SPDRK-LINER.400-WL-110DX-BK-SPDRK-LINER.500-WL-110
Bucket, Spade Nose Rock, ROK·GÄARD™ moldboard linerBucket, Spade Nose Rock, Lip ShroudsBucket, Spade Nose Rock, Cutting edge segmentsBucket, Spade Nose Rock, Side bar protector shroudsBucket, Spade Nose Rock, White iron wear blocksBucket, Spade Nose Rock, Hardox/AR400 moldboard linerBucket, Spade Nose Rock, Hardox/AR500 moldboard liner
DX-BK-SPDRK-14.00cyd-WL-120 Bucket, Spade Nose Rock (14.00 - 10.70) 22500 10206
DX-BK-SPDRK-15.00cyd-WL-120 Bucket, Spade Nose Rock (15.00 - 11.47) 22900 10387
DX-BK-SPDRK-16.00cyd-WL-120 Bucket, Spade Nose Rock (16.00 - 12.23) 23650 10727
DX-BK-SPDRK-17.00cyd-WL-120 Bucket, Spade Nose Rock (17.00 - 13.00) 24000 10886
DX-BK-SPDRK-18.00cyd-WL-120 Bucket, Spade Nose Rock (18.00 - 13.76) 25000 11340
DX-BK-SPDRK-LINER.RKG-WL-120DX-BK-SPDRK-LSHROUDS-WL-120DX-BK-SPDRK-SEGMENT-WL-120DX-BK-SPDRK-SSHROUDS-WL-120DX-BK-SPDRK-WHIRON-WL-120DX-BK-SPDRK-LINER.400-WL-120DX-BK-SPDRK-LINER.500-WL-120
Bucket, Spade Nose Rock, ROK·GÄARD™ moldboard linerBucket, Spade Nose Rock, Lip ShroudsBucket, Spade Nose Rock, Cutting edge segmentsBucket, Spade Nose Rock, Side bar protector shroudsBucket, Spade Nose Rock, White iron wear blocksBucket, Spade Nose Rock, Hardox/AR400 moldboard linerBucket, Spade Nose Rock, Hardox/AR500 moldboard liner
DX-BK-SPDRK-20.00cyd-WL-130 Bucket, Spade Nose Rock (20.00 - 15.29) 39000 17690
DX-BK-SPDRK-22.00cyd-WL-130 Bucket, Spade Nose Rock (22.00 - 16.82) 40000 18144
DX-BK-SPDRK-24.00cyd-WL-130 Bucket, Spade Nose Rock (24.00 - 18.35) 41600 18869
DX-BK-SPDRK-26.00cyd-WL-130 Bucket, Spade Nose Rock (26.00 - 19.88) 43000 19504
DX-BK-SPDRK-SEGMENT-WL-90DX-BK-SPDRK-SSHROUDS-WL-90DX-BK-SPDRK-LSHROUDS-WL-90DX-BK-SPDRK-WHIRON-WL-90DX-BK-SPDRK-LINER.400-WL-90DX-BK-SPDRK-LINER.RKG-WL-90
Bolt-on cutting edge segmentsSide Bar Protector ShroudsWeld-on or Mechanically Attached Lip ShroudsWhite Iron Wear Block PackageHardox 400 liner systemROK·GÄARD™ Carbide Armor Liner System
All Dymax Spade Nose Rock Buckets are equipped with weld-on adapters and tips and feature Rock Wings installed on exterior side plates for tire protection. Optional wear items are listed. For straight-edge bucket models or for any capacities or custom design requirements not listed, please contact Dymax sales. Bucket capacities are rated as SAE heap.
PLS 414
24 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
WHEEL LOADER
COAL BUCKETS - STOCKPILE AND SEAM LOADING
Bigger, Better Buckets
Dymax Coal Handling Buckets are built to provide years of productive use and are backed by the best service in the industry. Available in stockpile or seam loading designs. Stockpile models feature replaceable OEM bolt-on cutting edges, while seam loading models traditionally feature sharp-point teeth.
Stockpile loading model featuring bolt-on cutting edges
Side Cutter ProtectionOptional bolt-on wear shrouds installed on side cutter bars for buckets loading either in stockpile or seam applications.
Cutting Edge SystemsModels can be equipped with bolt-on cutting edges, teeth, segments and other wear protection.
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
25Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
Dymax Model # Description/Capacity (cyd -m3) Weight lb
Weight kg
Coal Stockpile Models
DX-BK-CL-7.50cyd-WL-80 Bucket, Coal (7.50 - 5.73) 5100 2313
DX-BK-CL-8.00cyd-WL-80 Bucket, Coal (8.00 - 6.12) 5300 2404
DX-BK-CL-8.50cyd-WL-80 Bucket, Coal (8.50 - 6.50) 5500 2495
DX-BK-CL-9.00cyd-WL-80 Bucket, Coal (9.00 - 6.88) 5790 2626
DX-BK-CL-9.50cyd-WL-80 Bucket, Coal (9.50 - 7.26) 6080 2758
DX-BK-CL-14.00cyd-WL-100 Bucket, Coal (14.00 - 10.70) 11200 5080
DX-BK-CL-15.00cyd-WL-100 Bucket, Coal (15.00 - 11.47) 11800 5352
DX-BK-CL-18.00cyd-WL-110 Bucket, Coal (18.00 - 13.76) 14800 6713
DX-BK-CL-20.00cyd-WL-110 Bucket, Coal (20.00 - 15.29) 16000 7257
DX-BK-CL-22.00cyd-WL-110 Bucket, Coal (22.00 - 16.82) 17099 7756
DX-BK-CL-25.00cyd-WL-120 Bucket, Coal (25.00 - 19.11) 19680 8927
DX-BK-CL-26.00cyd-WL-120 Bucket, Coal (26.00 - 19.88) 20200 9163
DX-BK-CL-28.00cyd-WL-120 Bucket, Coal (28.00 - 21.41) 21588 9792
DX-BK-CL-30.00cyd-WL-120 Bucket, Coal (30.00 - 22.94) 24500 11113
DX-BK-CL-32.00cyd-WL-120 Bucket, Coal (32.00 - 24.47) 28000 12700
DX-BK-CL-40.00cyd-WL-130 Bucket, Coal (40.00 - 30.58) 44500 20186
DX-BK-CL-42.00cyd-WL-130 Bucket, Coal (42.00 - 32.11) 46800 21228
DX-BK-CL-45.00cyd-WL-130 Bucket, Coal (45.00 - 34.41) 48500 22000
Coal Seam Loading Models
DX-BK-CLSM-12.50cyd-WL-110 Bucket, Coal Seam Loading (12.50 - 9.56) 15200 6895
DX-BK-CLSM-18.00cyd-WL-120 Bucket, Coal Seam Loading (18.00 - 13.76) 27100 12292
All Coal Buckets are equipped with choice of bolt-on cutting edge or weld-on adapters and tips. Optional wear items are listed. For straight-edge bucket models or for any capacities or custom design requirements not listed, please contact Dymax sales. Bucket capacities are rated as SAE heap.
PLS 415, 416
MODELS AND SPECS
WHEEL LOADER
Coal Seam Bucket working in Texas lignite mining applications
26 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S
WHEEL LOADER
SIDE DUMP - TWO-WAY DUMP BUCKETS FOR WHEEL LOADERS
Dymax Model # Description/Capacity (cyd -m3) Weight lb
Weight kg
DX-BK-2SD-4.00cyd-WL-80 Bucket, Dual Side Dump (R/L) (4.00 - 3.06) 6200 2812
DX-BK-2SD-5.50cyd-WL-90 Bucket, Dual Side Dump (R/L) (5.50 - 4.21) 9000 4082
DX-BK-2SD-6.00cyd-WL-90 Bucket, Dual Side Dump (R/L) (6.00 - 4.59) 10000 4536
All Three-Way Side Dump Buckets are equipped with weld-on adapters, tips and edge segments. Contact Dymax sales for information concerning wear liners and other wear protection. If you require a different capacity, contact Dymax sales.
PLS 417
Dump Forward, Dump Right, Dump Left
Dymax Side Dump - Two-Way Dump Buckets have the ability to dump forward, right or left. Ideally suited for rock handling in tunnel applications. In order for an operator to change dump sides all that is required is removal of a single pin and placing it on the opposing side. Design is well tested worldwide and often used in dam construction and other rock tunneling operations.
Cutting-Edge SystemsStandard models feature replaceable teeth and edge segments/shrouds installed.
Tough SteelDymax Three-Way Side Dump Buckets feature AR400/T1 and other high-abrasion-resistant steels, providing long service life and lower maintenance
Heavy-Duty CornersHeavy-duty corners feature additional wear support and are composed of AR400 steels
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
27Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
SKELETON ROCK BUCKETS FOR WHEEL LOADERS
WHEEL LOADER
Dymax Model # Description/Capacity (cyd -m3) Weight lb
Weight kg
DX-BK-SR-4.00cyd-WL-60 Bucket, Skeleton Rock (4.00 - 3.06) 4570 2073
DX-BK-SR-4.50cyd-WL-80 Bucket, Skeleton Rock (4.50 - 3.44) 6240 2830
DX-BK-SR-5.00cyd-WL-80 Bucket, Skeleton Rock (5.00 - 3.82) 6500 2948
DX-BK-SR-5.50cyd-WL-80 Bucket, Skeleton Rock (5.50 - 4.21) 6910 3134
DX-BK-SR-5.00cyd-WL-90 Bucket, Skeleton Rock (5.00 - 3.82) 6700 3039
DX-BK-SR-5.50cyd-WL-90 Bucket, Skeleton Rock (5.50 - 4.21) 7000 3175
DX-BK-SR-6.00cyd-WL-90 Bucket, Skeleton Rock (6.00 - 4.59) 7430 3370
DX-BK-SR-6.50cyd-WL-90 Bucket, Skeleton Rock (6.50 - 4.97) 7790 3533
DX-BK-SR-7.00cyd-WL-100 Bucket, Skeleton Rock (7.00 - 5.35) 11800 5352
DX-BK-SR-7.50cyd-WL-100 Bucket, Skeleton Rock (7.50 - 5.73) 12400 5625
All Dymax Skeleton Rock Buckets are equipped with choice of bolt-on cutting edge or weld-on adapters and tips. Optional wear items are listed. For straight-edge bucket models or for any capacities or custom design requirements not listed, please contact Dymax sales. Bucket capacities are rated as SAE heap.
PLS 418
Dymax Skeleton Rock Buckets feature spacing between steel ribs that allows the buckets to retain larger-sized rocks while sifting fine material.
High-strength, abrasion-resistant steel construction resists impact and abrasion from demanding job sites.
Ideal applications include heavy-duty rock handling in quarries and dam sites or in stockpile applications.
Tine SpacingStandard models feature 10 to 12-tine spacing. Specialty tine spacings are available upon request to meet your requirements
Cutting-Edge SystemsAvailable with bolt-on cutting edges or with weld-on adapters and tips.
28 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
WHEEL LOADER
MATERIAL HANDLING ARMS/BOOMS FOR WHEEL LOADERS
Dymax Model # Description/Retracted x extended (ft x ft - m x m) Weight lb
Weight kg
DX-MH-MLEX-8ftx13ft-WL-60 Material Handling Arm, Manual Extension (8 x 13 - 2.44 x 3.96) 1500 680
DX-MH-MLEX-9ftx14ft-WL-70 Material Handling Arm, Manual Extension (9 x 14 - 2.74 x 4.27) 2200 998
DX-MH-MLEX-9ftx14ft-WL-80 Material Handling Arm, Manual Extension (9 x 14 - 2.74 x 4.27) 2650 1202
DX-MH-MLEX-10ftx18ft-WL-90 Material Handling Arm, Manual Extension (10 x 18 - 3.05 x 5.49) 3580 1624
For specialty booms, please contact Dymax sales for more information. Dymax custom products group can design a purpose built material handling arm to match your job requirements.
PLS 419, 421
Dymax Material Handling Arms for wheel loaders and tool carriers are available in a two-piece manual extension model. Fixed models are also available upon request.
Dymax Material Handling Arms can be designed to pin directly to the machine or equipped with coupler hooks to work with the Dymax coupler system or other popular coupler models.
Available for most machine makes and models, the Dymax Material Handling Arm is ideal for placing objects in desired positions. Clevis and lifting hooks are sold separately upon request.
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
29Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
WHEEL LOADER
HEAVY-DUTY PALLET FORKS FOR WHEEL LOADERS
Dymax Model # Description/Tine Length x Carriage/Capacity (in x in, in x in, - m x m, cm x cm)
Weight lb
Weight kg
Shaft-Mounted Tine Models
DX-FK-PTS-72inx110in-WL-90Fork, Pallet, Shaft Mount (72 x 110, 3.25 x 8.00, 48,800lb - 1.83 x 2.79, 8.26 x 20.32, 22,182kg)
4400 1996
DX-FK-PTS-84inx110in-WL-90Fork, Pallet, Shaft Mount (84 x 110, 3.25 x 8.00, 48,800lb - 2.13 x 2.79, 8.26 x 20.32, 22,182kg)
4580 2077
DX-FK-PTS-96inx110in-WL-90Fork, Pallet, Shaft Mount (96 x 110, 3.25 x 8.00, 48,800lb - 2.44 x 2.79, 8.26 x 20.32, 22,182kg)
4700 2132
DX-FK-PTS-72inx110in-WL-100Fork, Pallet, Shaft Mount (72 x 110, 3.75 x 8.00, 61,000lb - 1.83 x 2.79, 9.53 x 20.32, 27,727kg)
4615 2093
DX-FK-PTS-84inx110in-WL-100Fork, Pallet, Shaft Mount (84 x 110, 3.75 x 8.00, 61,000lb - 2.13 x 2.79, 9.53 x 20.32, 27,727kg)
4700 2132
DX-FK-PTS-96inx110in-WL-100Fork, Pallet, Shaft Mount (96 x 110, 3.75 x 8.00, 61,000lb - 2.44 x 2.79, 9.53 x 20.32, 27,727kg)
5200 2359
Hydraulic Adjustable Tine Models
DX-FK-PTHT-84inx96in-WL-80Pallet, Hydraulic Adjustable Tine (84 x 96, 3.00 x 7.00, 34,200lb - 2.13 x 2.44, 7.62 x 17.78, 15,545kg)
3350 1520
DX-FK-PTHT-96inx96in-WL-80Pallet, Hydraulic Adjustable Tine (96 x 96, 3.00 x 7.00, 34,200lb - 2.44 x 2.44, 7.62 x 17.78, 15,545kg)
3500 1588
DX-FK-PTHT-72inx84in-WL-80Pallet, Hydraulic Adjustable Tine (72 x 84, 3.00 x 7.00, 34,200lb - 1.83 x 2.13, 7.62 x 17.78, 15,545kg)
3200 1452
Dymax offers many Pallet Forks not listed in these pages. For custom sizes and capacities to meet your requirements, please contact Dymax custom products group. Let us know your requirements or special application needs.
PLS 426
Dymax Pallet Forks for large wheel loaders are ideal for mine sites and quarrying operations.
Dymax Pallet Forks provide a convenient alternative to a dedicated forklift and are available for all machine brands and models.
Hydraulic-adjusting tine forks
Pallet forks with shaft-mounted tines. Standard models feature manual-adjusting, non-swing tines.
30 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
BLOCK HANDLING FORKS FOR WHEEL LOADERS
WHEEL LOADER
Dymax Heavy-Duty Block Handling Forks are built to provide years of productive use and are backed by the best service in the industry.
Dymax Heavy-Duty Block Handling Forks feature shaft-mount tines that can be fixed in any given position to match your application. Certain models feature minimal tine adjustability. The shaft-mount tines can easily be replaced. Optional weld-on tines are available if specified.
Ideally suited for handling blocks of stone in quarry and mining applications.
Dymax Model # Description/Tine Length x Carriage/Capacity (in x in, in x in, - m x m, cm x cm)
Weight lb
Weight kg
DX-FK-BH-60inX60in-WL-70 Fork, Block Handling (60 x 60, 3.50 x 8.00, 54,600lb - 1.52 x 1.52, 8.89 x 20.32, 24,818kg) 2650 1202
DX-FK-BH-72inx60in-WL-70 Fork, Block Handling (72 x 60, 3.50 x 8.00, 54,600lb - 1.83 x 1.52, 8.89 x 20.32, 24,818kg) 2810 1275
DX-FK-BH-60inx60in-WL-80 Fork, Block Handling (60 x 60, 3.50 x 8.00, 54,600lb - 1.52 x 1.52, 8.89 x 20.32, 24,818kg) 2750 1248
DX-FK-BH-60inx72in-WL-80 Fork, Block Handling (60 x 72, 3.50 x 8.00, 54,600lb - 1.52 x 1.83, 8.89 x 20.32, 24,818kg) 3580 1624
DX-FK-BH-60inx60in-WL-90 Fork, Block Handling (60 x 60, 4.00 x 10.00, 84,400lb - 1.52 x 1.52, 10.16 x 25.40, 38,364kg) 4800 2177
DX-FK-BH-72inx84in-WL-90 Fork, Block Handling (72 x 84, 4.00 x 10.00, 84,400lb - 1.83 x 2.13, 10.16 x 25.40, 38,364kg) 5280 2395
DX-FK-BH-84inx84in-WL-90 Fork, Block Handling (84 x 84, 4.00 x 10.00, 84,400lb - 2.13 x 2.13, 10.16 x 25.40, 38,364kg) 6800 3084
DX-FK-BH-60inx60in-WL-100 Fork, Block Handling (60 x 60, 4.00 x 10.00, 84,400lb - 1.52 x 1.52, 10.16 x 25.40, 38,364kg) 5200 2359
DX-FK-BH-72inx72in-WL-100 Fork, Block Handling (72 x 72, 4.00 x 10.00, 84,400lb - 1.83 x 1.83, 10.16 x 25.40, 38,364kg) 5500 2495
DX-FK-BH-84inx72in-WL-100 Fork, Block Handling (84 x 72, 4.00 x 10.00, 84,400lb - 2.13 x 1.83, 10.16 x 25.40, 38,364kg) 6120 2776
DX-FK-BH-96inx96in-WL-110 Fork, Block Handling (96 x 96, 4.00 x 12.00, 101,400lb - 2.44 x 2.44, 10.16 x 30.48, 46,091kg) 8000 3628
DX-FK-BH-96inx96in-WL-120 Fork, Block Handling (96 x 96, 4.50 x 12.00, 134,000lb - 2.44 x 2.44, 11.43 x 30.48, 60,909kg) 9800 4446
For specialty Block Handling Forks, please contact Dymax sales for more information. Dymax custom products group can design a purpose-built Block Handling Fork to meet your application requirements.
PLS 426
Tines are available in welded or shaft mount
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
31Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
SUCCESS STORY
CONVEYOR BELT SHEARING SYSTEMS FOR LOADERS, EXCAVATORS
In 2001, a coal mine in Texas needed a solution to get its workers out of harm’s way. The coal mine had miles and miles of old steel-corded rubber belting and needed a quick, effective solution for cutting it down to size. Prior to engaging with the Dymax custom products group, the workers used heavy, 80-lb saws to cut the belt. Not only was this dangerous, it was also highly time consuming, taking 20 minutes at times to make a single cut. Inhalation of rubber and smoke also posed health and safety risks.
Dymax was approached to develop a belt shear that worked with a conventional loader, excavator or telehandler. The result was excellent. A hydraulic-power-fed roller system engaged the belt and pulled it into the shearing mechanism. Indexable demolition shearing knives sliced through the 1.5-2-meter wide belts in under 60 seconds. The mine was finally able to cut belt into smaller pieces and sell the pieces to local feedlots and ranchers, where it was used for walkway and bedding material.
A fun and exciting project left mine workers smiling at day’s end. Photo taken in 2002 at coal mine in Texas.
32 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
ROCK & MASS EXCAVATION BUCKETS FOR MINING BACKHOES
EXCAVATOR/SHOVEL
Dymax Rock and Mass Excavation Buckets for Mining Backhoes are proven in worldwide mining operations.
“We have a mine customer in the far reaches of Siberia who prefers Dymax Buckets over others, because they outperform and outlast other brands. On top of this, Dymax personnel were the first bucket manufacturer to visit us and our applications. They are great folks to work with.”
-Sergey Eremin, Scorpion Inc., Kemerovo, Russian Federation.
Solid, Hardox 400 side cutters
Up to 6-inch-thick cutting edges
Heavy-Duty Top AssemblyDual-beam top assembly construction, line bored to fit OEM tolerances, provided with all necessary bushings
Hardox 400/500 rear wear plates combined with Dymax ROK·GÄARD™ make for the ultimate in wear protection
Optional Dymax ROK·GÄARD™ Chromium Carbide liner packages
Available with Esco, Hensley or other OEM ground engaging solutions
Brakefield Coal’s Hitachi EX1800 fitted with Dymax 15-yard Rock Bucket.
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
33Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
EXCAVATOR/SHOVEL
Dymax Model # Description/Width x Capacity (in x cyd - m x m3) Weight lb
Weight kg
DX-BK-RK-30x1.63-HX-45T Bucket, Rock (30 x 1.63 - 0.76 x 1.25) 3860 1751
DX-BK-RK-42x1.88-HX-45T Bucket, Rock (42 x 1.88 - 1.07 x 1.44) 4300 1950
DX-BK-RK-48x2.25-HX-45T Bucket, Rock (48 x 2.25 - 1.22 x 1.72) 4600 2087
DX-BK-RK-54x3.00-HX-45T Bucket, Rock (54 x 3.00 - 1.37 x 2.29) 5000 2268
DX-BK-RK-60X3.25-HX-45T Bucket, Rock (60 x 3.25 - 1.53 x 2.48) 5700 2586
DX-BK-RK-54X2.25-HX-65T Bucket, Rock (54 x 2.25 - 1.38 x 1.72) 5080 2304
DX-BK-RK-72x4.50-HX-65T Bucket, Rock (72 x 4.50 - 1.83 x 3.44) 7800 3538
DX-BK-RK-36x2.70-HX-85T Bucket, Rock (36 x 2.70 - 0.91 x 2.06) 5400 2449
DX-BK-RK-42x3.30-HX-85T Bucket, Rock (42 x 3.30 - 1.07 x 2.52) 6600 2994
DX-BK-RK-48x3.90-HX-85T Bucket, Rock (48 x 3.90 - 1.22 x 2.98) 8000 3629
DX-BK-RK-54x4.60-HX-85T Bucket, Rock (54 x 4.60 - 1.37 x 3.52) 8600 3901
DX-BK-RK-84x4.90-HX-85T Bucket, Rock (84 x 4.90 - 2.13 x 3.75) 9750 4423
DX-BK-RK-84x6.80-HXM-120T Bucket, Rock (84 x 6.80 - 2.13 x 5.20) 13200 5988
DX-BK-RK-88x7.60-HXM-120T Bucket, Rock (88 x 7.60 - 2.24 x 5.81) 14800 6713
DX-BK-RK-94x8.80-HXM-120T Bucket, Rock (94 x 8.80 - 2.39 x 6.73) 16200 7348
DX-BK-RK-108x12.60-HXM-200T Bucket, Rock (108 x 12.60 - 2.74 x 9.63) 24000 10886
DX-BK-RK-120x17.00-HXM-200T Bucket, Rock (120 x 17.00 - 3.05 x 13.00) 27500 12474
DX-BK-RK-132x15.70-HXM-200T Bucket, Rock (132 x 15.70 - 3.35 x 12.00) 26500 12020
DX-BK-RK-125x19.60-HXM-250T Bucket, Rock (125 x 19.60 - 3.18 x 14.99) 35000 15876
DX-BK-RK-150x28.80-HXM-350T Bucket, Rock (150 x 28.80 - 3.81 x 22.02) 45000 20412
Buckets listed represent common models. For capacities and widths not listed, please contact Dymax sales for quotations.
PLS 427
MODELS AND SPECS
34 [email protected] DMC212012
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
Dymax Model # Description/Width x Capacity (in x cyd - m x m3) Weight lb
Weight kg
DX-BK-SHV-98x7.70-HXM-120TDX-BK-SHV-LINER.RKG-HXM-120TDX-BK-SHV-LINER.400-HXM-120TDX-BK-SHV-LINER.500-HXM-120T
Bucket, Shovel (98 x 7.70 - 2.49 x 5.89)Bucket, Shovel, ROK·GÄARD™ moldboard linerBucket, Shovel, Hardox/AR400 moldboard linerBucket, Shovel, Hardox/AR500 moldboard liner
22000 9979
DX-BK-SHV-110x8.50-HXM-120TDX-BK-SHV-LINER.RKG-HXM-120TDX-BK-SHV-LINER.400-HXM-120TDX-BK-SHV-LINER.500-HXM-120T
Bucket, Shovel (110 x 8.50 - 2.79 x 6.50)Bucket, Shovel, ROK·GÄARD™ moldboard linerBucket, Shovel, Hardox/AR400 moldboard linerBucket, Shovel, Hardox/AR500 moldboard liner
24000 10886
DX-BK-SHV-135x14.40-HXM-200TDX-BK-SHV-LINER.RKG-HXM-200TDX-BK-SHV-LINER.400-HXM-200TDX-BK-SHV-LINER.500-HXM-200T
Bucket, Shovel (135 x 14.40 - 3.43 x 11.01)Bucket, Shovel, ROK·GÄARD™ moldboard linerBucket, Shovel, Hardox/AR400 moldboard linerBucket, Shovel, Hardox/AR500 moldboard liner
34000 15422
DX-BK-SHV-135x15.70-HXM-200TDX-BK-SHV-LINER.RKG-HXM-200TDX-BK-SHV-LINER.400-HXM-200TDX-BK-SHV-LINER.500-HXM-200T
Bucket, Shovel (135 x 15.70 - 3.43 x 12.00)Bucket, Shovel, ROK·GÄARD™ moldboard linerBucket, Shovel, Hardox/AR400 moldboard linerBucket, Shovel, Hardox/AR500 moldboard liner
36500 16556
DX-BK-SHV-142x19.60-HXM-250TDX-BK-SHV-LINER.RKG-HXM-250TDX-BK-SHV-LINER.400-HXM-250TDX-BK-SHV-LINER.500-HXM-250T
Bucket, Shovel (142 x 19.60 - 3.61 x 14.99)Bucket, Shovel, ROK·GÄARD™ moldboard linerBucket, Shovel, Hardox/AR400 moldboard linerBucket, Shovel, Hardox/AR500 moldboard liner
44000 19958
Buckets listed represent common models. For capacities and widths not listed, please contact Dymax sales for quotations.
PLS 428
HYDRAULIC BOTTOM DUMP BUCKETS - SHOVELS
EXCAVATOR/SHOVEL
page 5
DYMAXRAIL TOOLS AN
D MACHIN
ES
35Specifications and design subject to change without notice www.DYMAXMINING.com
DYMAXM
ININ
G WORK TOOLS
ENGINEERED-TO-ORDER PRODUCTS - CUSTOM
CUSTOM
Dymax is proud to provide our customers with special application work tools. To help us provide you with the attachment you need, please provide the following information. We will then be able to generate a sketch for you.
Machine brand and series dataMaterial, weight, characteristicsDescribe applicationCapacity needed?Width, height, depth necessary?Dump clearance restrictions (at 45 degrees)?Type of cutting edge: straight, v-type, etc.?Are teeth required? Specific brand?Quick coupler or pin-on? Which?Other application data?
Better yet, give us a call and visit with one of our capable sales engineers about how we can help you.
Dymax Backhoe Loader Specialty Hammer Adapter allows customers to use common hammer models on other machines without re-fitment. Dymax provides a custom coupler solution with manual rotation ability, giving operators the ability to lay the hammer flat on the ground and knock out dragline pins.
Dymax Custom Booms can be used in many applications found throughout the mining industry. Whether you need a clearing rake for pulling rock loose before hauling with your Dymax Block Fork or a stockpile boom for compacting and pushing material to the ceiling in underground mines, Dymax’s custom products group can design and build your next boom.
Dymax Bonus Buckets are ideal for loading sand, gravel and other aggregates. Designed with the hinge plates recessed into the bucket, allowing high-capacity loading in narrow width designs. Ideal for matching capacity to trailers in specific applications. Call Dymax sales for more information regarding Dymax Bonus Buckets, and put the Bonus on your machine.
DYM
AXM
ININ
G W
ORK
TOOL
S US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
EXCAVATOR
DYMAXMINING402 Miller DriveP.O. Box 297Wamego, Kansas 66547USA
US Toll Free: 1-800-530-5407Worldwide: +1-785-456-2081Fax: +1-785-456-8328Email: [email protected]
MINING MACHINERY PARTS GRAPPLES - SAFETY FIRST
Dymax Model # Description/Capacity Weight lb
Weight kg
DX-GL-HY-360-HX-03TRotation Grapple, Hydraulic, 360-degree rotation, 3 Tons
400 181
DX-GL-HY-360-HX-04TRotation Grapple, Hydraulic, 360-degree rotation, 4 Tons
450 204
DX-GL-HY-360-HX-05TRotation Grapple, Hydraulic, 360-degree rotation, 5 Tons
600 274
DX-GL-HY-360-HX-06TRotation Grapple, Hydraulic, 360-degree rotation, 6 Tons
700 318
DX-GL-HY-360-HX-07TRotation Grapple, Hydraulic, 360-degree rotation, 7 Tons
1,200 544
DX-GL-HY-360-HX-08TRotation Grapple, Hydraulic, 360-degree rotation, 8 Tons
1,400 635
PLS 429
Dymax Model # Description/Capacity Weight lb
Weight kg
DX-PH-GL-180mm-HX-3TPin Handler, Grapple, 180mm diameter max rated capacity
390 177
DX-PH-GL-180mm-HX-5T Pin Handler, Grapple, 180mm diameter max rated capacity 420 191
PLS 429
Pin GrappleHandle 200mm-diameter pins, chains and other machinery parts using a 3-8T excavator. No more back-breaking lifting and placing your workers in harm’s way.
Pin Handler Fail-safe pin handling. Features built-in pin pusher to start mining pins in clevis holes. Your workers can now feel safe.
Safety is always a top priority in every mine. Handling cumbersome and heavy machinery pins by hand presents safety and ergonomic challenges.
Dymax pin handling work tools (Pin Handler and Pin Grapple) were developed for a large mining company in Australia’s Hunter Valley region. Maintenance workers used to change out drag line clevis pins and track pins by hand. Not only was it a back-breaking job, it posed many safety risks.
DymaxMining entered the picture with the development of its pin handling grapple and pin inserter. Now one operator with a mini-excavator can change pins in much less time than when done manually.
Do you have something you’d like done in your mine to make the job safer and more productive? Give us a call.