dvr internet connection instruction -...
TRANSCRIPT
(P2P Function)For DVR Model No. LX4
Page- 01AHMEDABAD | BENGALURU | CHENNAI | DELHI | GHAZIABAD
HYDERABAD | JAIPUR | KOLKATA | LUCKNOW | NAGPUR
Email: [email protected]
DVR INTERNET CONNECTION INSTRUCTIONDVR INTERNET CONNECTION INSTRUCTIONDVR INTERNET CONNECTION INSTRUCTIONDVR INTERNET CONNECTION INSTRUCTION
� DVR Model No. LX4 supports Plug and Play (P2P function). There isno need to set router, we just have to plug the DVR to the poweroutlet, switch on the power, and then enter into the main menu of theDVR, and write down the serial number. Now input http://xmeye.netinto the IEbar. Then click “by device” at the login interface, input theserial number which was shown on DVR, then ok to access it.serial number which was shown on DVR, then ok to access it.
www.svbinternational.com Page- 02
STEP-1Connect the DVR to monitor and Internet via LAN or WAN cable.
STEP-2Turn on the DVR, and press the right button of the mouse, you will find the menu
list on the screen of the monitor as below:
www.svbinternational.com Page- 03
STEP-3 STEP-4
www.svbinternational.com Page- 04
STEP-5
www.svbinternational.com Page- 05
STEP-6Input http://xmeye.net into the IE address bar
www.svbinternational.com Page- 06
STEP-7Now click “By Device” in the login Interface. And then input
the serial number, which was shown on DVR menu.
www.svbinternational.com Page- 07
BY Device
Put the serial number and verify number,
ok to login
www.svbinternational.com Page- 08
STEP-8After login into the interface, you can monitor DVR via Internet now.
www.svbinternational.com Page- 09
Note: For first time to login into the interface, one needs to install the
Active. Please check the steps for installing the Active.
A. Click , Then the following interface would be shown as below:
www.svbinternational.com Page- 10
Click Run
Again
www.svbinternational.com Page- 11
AgainClick Run
B. Click “Run”,Active installation, will jump off to the interface as below:
www.svbinternational.com Page- 12
C. Click “ Next“, then it will show the interface as below:
www.svbinternational.com Page- 13
D. Click “ Next“, then it will show the interface as below:
www.svbinternational.com Page- 14
E. Select the storage path, Click “Next” to enter the next step ofinstallation, then check as below:
www.svbinternational.com Page- 15
F. Click “Next“ to begin installation, when the installation is complete, itwill jump off to the interface as below:
www.svbinternational.com Page- 16
G. Click “Finish” to exit this installation.
For more settings/ informationyou can contact SVB Care
on [email protected] 09999358385
For salesFor salesYou can contact SVB sales [email protected]
Or 08800692211
Settings Complete
Page- 17AHMEDABAD | BENGALURU | CHENNAI | DELHI | GHAZIABAD
HYDERABAD | JAIPUR | KOLKATA | LUCKNOW | NAGPUR
Email: [email protected]