dvd bbk dv314s 1389 service manual
TRANSCRIPT
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
1/41
SERVICE MANUAL
DV314S
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
2/41
32
19
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
3/41
1.1 GENERAL GUIDELINES
1.When servicing,observe the original lead dress.ifa short circuit is found,replace all parts which have
been overheated or damaged by the short circuit.
2.After servicing,see to it that all the protective devices such as insulation barrier,insulation papers
shields are properly installed.
3.After servicing,make the following leakage current checks to prevent the customer from being exposed
to shock hazards.
Some semiconductor(solid state)devices can be damaged easily by static electricity.Such components
commonly are called Electrostatically Sensitive(ES)Devices.Examples of typical ES devices are integrated
circuits and some field-effect transistorsand semiconductor chip components.The following techniques
should be used to help reduce the incidence of component damage caused by electro static discharge(ESD).
1.Immediately before handling any semiconductor component or semiconductor-equipped assembly,drain
off any ESDon your body by touching a known earth ground.Alternatively,obtain and wear a commercially
availabel discharging ESD wrist strap,which should be removed for potential shock reasons prior to
applying power to the unit under test.
2.After removing an electrical assembly equipped with ES devices,place the assembly on a conductive
surface such as alminum foil,to prevent electrostatic charge buildup or exposure of the assembly.
3.Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4.Use only an anti-static solder removal device.Some solder removal devices not classified as anti-static
(ESD protected)can generate electrical charge sufficient to damage ES devices.
5.Do not use freon-propelled chemicals.These can generate electrical charges sufficient to damage ES
devices.
6.Do not remove a replacement ES device from its protective package until immediately before you are
ready to install it.(Most replacement ES devices are packaged with leads electrically shorted together by
conductive foam,alminum foil or comparable conductive material).
7.Immediately before removing the protective material from the leads of a replacement ES device,touch
the protective material to the chassis or circuit assembly into which the device will be installed.
CautionBe sure no power is applied to the chassis or circuit,and observe all other safety precautions.
8.Minimize bodily motions when handling unpackaged replacement ES devices.(Otherwise harmless motion
such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can
generate static electricity(ESD).
notice (1885x323x2 tiff)
1. SAFETY PREAUTIONS
2.PREVENTION OF ELECTRO STATIC DISCHARGE(ESD)TOELECTROSTATICALLY SENSITIVE(ES)DEVICES
1
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
4/41
Front Panel Illustration
32 5 64 7
8
2 Disctray
8 MIC VOLUMEknob
9
3 IR SENSORbutton
MICjack9
POWERswitch
5 OPEN/CLOSEbutton
6 PLAY/ buttonPAUSE
STOPbutton7
4 Display window
2
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
5/41
The laser diode in the traverse unit (optical pickup)may brake down due to static electricity of clothes or human
body.Use due caution to electrostatic breakdown when servicing and handling the laser diode.
4.1.Grounding for electrostatic breakdown prevention
Some devices such as the DVD player use the optical pickup(laser diode)and the optical pickup will be damaged
by static electricity in the working environment.Proceed servicing works under the working environment where
grounding works is completed.
4.1.1. Worktable grounding
1.Put a conductive material(sheet)or iron sheet on the area where the optical pickup is placed,and ground the
4.1.2.Human body grounding
1 Use the anti-static wrist strap to discharge the static electricity from your body.
4.1.3.Handling of optical pickup
1.To keep the good quality of the optical pickup maintenance parts during transportation and before
installation,the both ends of the laser diode are short-circuited.After replacing the parts with new ones,
remove the short circuit according to the correct procedure.(See this Technical Guide).
2.Do not use a tester to check the laser diode for the optical pickup .Failure to do so willdamage the laser
diode due to the power supply in the tester.
4.2.Handling precautions for Traverse Unit (Optical Pickup)
1.Do not give a considerable shock to the traverse unit(optical pickup)as it has an extremely high-precise
structure.
2.When replacing the optical pickup,install the flexible cable and cut is short land with a nipper.See the
optical pickup replacement procedure in this Technical Guide.Before replacing the traverse unit,remove
the short pin for preventingstatic electricity and install a new unit.Connect the connector as short times as
possible.
3.The flexible cable may be cut off if an excessive force is applied to it.Use caution when handling the cable
4.The half-fixed resistor for laser power adjustment cannot be adjusted.Do not turn the resistor.
safety_3 (1577x409x2 tiff)
sheet.
3
4.PREVENTION OF STATIC ELECTRICITY DISCHARGE
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
6/41
5.1Optical pickup UnitExplosed View and Part List
Pic (1)
5. Assembling and disassembling the mechanism unit
4
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
7/41
Materials to Pic (1)
No. PARTS CODE PARTS NAME Q ty
14692200 SF-HD60 1
1 1EA0311A06300 ASSY, CHASSIS, COMPLETE 1
2 1EA0M10A15500 ASSY, MOTOR, SLED 1
Or 1EA0M10A15501 ASSY, MOTOR, SLED 1
3 1EA2451A24700 HOLDER, SHAFT 3
4 1EA2511A29100 GEAR, RACK 1
5 1EA2511A29200 GEAR, DRIVE 1
6 1EA2511A29300 GEAR, MIDDLE, A 1
7 1EA2511A29400 GEAR, MIDDLE, B 18 1EA2744A03000 SHAFT, SLIDE 1
9 1EA2744A03100 SHAFT, SLIDE, SUB 1
10 1EA2812A15300 SPRING, COMP, TYOUSEI 3
11 1EA2812A15400 SPRING, COMP, RACK 1
21 1EA0B10B20100 ASSY, PWB 1
Or 1EA0B10B20200 ASSY, PWB 1
31 SEXEA25700--- SPECIAL SCREW BIN+-M2X11 3
32 SEXEA25900--- SPECIAL SCREW M1.7X2.2 2
33 SFBPN204R0SE- SCR S-TPG PAN 2X4 2
34 SFSFN266R0SE- SCR S-TPG FLT 2.6X6 1
35 SWXEA15400--- SPECIAL WASHER 1.8X4 X0.25 2
Note : This parts list is not for service parts supply.
5
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
8/41
5.2 BracketExplosed View and Part List
Pic (2)
Materials to Pic(2)
1.bracket 14. front silicon rubber
2.belt 15. Back silicon rubber
3.screw 16. Pick-up
4.belt wheel 17. Pick-up
5.gearwheel 18. switch
6.iron chip 19. Five-pin flat plug
7. Immobility mechanism equipment 20. screw
8. Magnet 21. PCB
9. Platen 22. motor
10. Bridge bracket 23. Motor wheel
11. screw 24. screw
12. screw 25.tray
13. Big bracket
Before going process with disassembly and installation, please carefully both
peruse the chart and confirm the materials.
6
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
9/41
5.3 MISCELLANEOUS
5.3.1 Protection of the LD(Laser diode)
Short the parts of LD circuit pattern by soldering.
5.3.2 Cautions on assembly and adjustment
Make sure that the workbenches,jigs,tips,tips of soldering irons and measuring instruments are
grounded,and that personnel wear wrist straps for ground.
Open the LD short lands quickl y with a soldering iron after a circuit is connected.
Keep the power source of the pick-up protected from internal and external sources of electricalnoise.
Refrain from operation and storage in atmospheres containing corrosive gases (such as H2S,SO2,
NO2 and Cl2)or toxic gases or in locations containing substances(especially from the organic silicon,cyan,
formalin and phenol groups)which emit toxic gases.It is particularly important to ensure that none of the
above substances are present inside the unit.Otherwise,the motor may no longer run.
7
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
10/41
6.1. Video Output (Luminance Signal) Confirmation
DO this confirmation after replacing a P.C.B.
Purpose:To maintain video signal output compatibility.
1.Connect the oscilloscope to the video output terminal and terminate at 75 ohms.
2.Confirm that luminance signal(Y+S)level is 1000mVp-p30mV
Measurement point
Video output terminal
Color bar 75%
PLAY(Title 46):DVDT-S15
PLAY(Title 12):DVDT-S01
DVDT-S15
or
DVDT-S01
Mode Disc
Measuring equipment,tools
200mV/dir,10 sec/dir 1000mVp-p30mV
Confirmation value
6.Electrical Confirmation
8
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
11/41
Do the confirmation after replacing P.C.B.
Purpose:To maintain video signal output compatibility.
1.Connect the oscilloscope to the video output terminal and terminate at 75 ohme.
2.Confirm that the chrominance signal(C)level is 621 mVp-p30mV
Measurement point
Video output terminal
Color bar 75%
PLAY(Title 46):DVDT-S15
PLAY(Title 12):DVDT-S01
DVDT-S15
or
DVDT-S01
Mode Disc
Measuring equipment,tools Confirmation valueScrewdriver,Oscilloscope
200mV/dir,10 sec/dir 621mVp-p30mV
6.2 Video Output(Chrominance Signal) Confirmation
9
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
12/41
7.MPEG BOARD CHECK WAVEFORM
7.1 27MHz WAVEFORM
7.2 IC VIPER22 PIN.5 WAVEFORM DIAGRAM
10
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
13/41
This Data Sheet states AMDs current technical specifications regarding the Product described herein. This DataSheet may be revised by subsequent versions or modifications due to changes in technical specifications.
Publication# 22358 Rev: B Amendment/+3Issue Date: November 10, 2000
16 Megabit (2 M x 8-Bit/1 M x 16-Bit)
CMOS 3.0 Volt-only Boot Sector Flash Memory
DISTINCTIVE CHARACTERISTICS
Single power supply operation
Full voltage range: 2.7 to 3.6 volt read and writeoperations for battery-powered applications
Regulated voltage range: 3.0 to 3.6 volt read andwrite operations and for compatibility with highperformance 3.3 volt microprocessors
Manufactured on 0.23m process technology
Fully compatible with 0.32 m Am29LV160B device
High performance Access times as fast as 70 ns
Ultra low power consumption (typical values at5 MHz)
200 nA Automatic Sleep mode current
200 nA standby mode current
9 mA read current
20 mA program/erase current
Flexible sector architecture
One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, andthirty-one 64 Kbyte sectors (byte mode)
One 8 Kword, two 4 Kword, one 16 Kword, andthirty-one 32 Kword sectors (word mode)
Supports full chip erase
Sector Protection features:
A hardware method of locking a sector to preventany program or erase operations within that sector
Sectors can be locked in-system or viaprogramming equipment
Temporary Sector Unprotect feature allows codechanges in previously locked sectors
Unlock Bypass Program Command
Reduces overall programming time when issuingmultiple program command sequences
Top or bottom boot block configurationsavailable
Embedded Algorithms
Embedded Erase algorithm automaticallypreprograms and erases the entire chip or anycombination of designated sectors
Embedded Program algorithm automaticallywrites and verifies data at specified addresses
Minimum 1,000,000 write cycle guaranteeper sector
20-year data retention at 125C
Reliable operation for the life of the system
Package option
48-ball FBGA
48-pin TSOP
44-pin SO
CFI (Common Flash Interface) compliant
Provides device-specific information to thesystem, allowing host software to easilyreconfigure for different Flash devices
Compatibility with JEDEC standards
Pinout and software compatible with single-power supply Flash
Superior inadvertent write protection
Data# Polling and toggle bits
Provides a software method of detecting programor erase operation completion
Ready/Busy# pin (RY/BY#)
Provides a hardware method of detectingprogram or erase cycle completion (not availableon 44-pin SO)
Erase Suspend/Erase Resume
Suspends an erase operation to read data from,or program data to, a sector that is not beingerased, then resumes the erase operation
Hardware reset pin (RESET#)
Hardware method to reset the device to readingarray data
11
8. Am29LV160D
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
14/41
Am29LV160D
PRODUCT SELECTOR GUIDE
Note:See AC Characteristics for full specifications.
BLOCK DIAGRAM
Family Part Number Am29LV160D
Speed Option Voltage Range: VCC= 2.73.6 V -70 -90 -120
Max access time, ns (tACC) 70 90 120
Max CE# access time, ns (tCE) 70 90 120
Max OE# access time, ns (tOE) 30 35 50
Input/OutputBuffers
X-Decoder
Y-Decoder
Chip EnableOutput Enable
Logic
Erase VoltageGenerator
PGM VoltageGenerator
TimerVCCDetector
StateControl
CommandRegister
VCC
VSS
WE#
BYTE#
CE#
OE#
STB
STB
DQ0DQ15 (A-1)
Sector Switches
RY/BY#
RESET#
DataLatch
Y-Gating
Cell Matrix
AddressLatch
A0A19
12
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
15/41
CONNECTION DIAGRAMS
A1
A15
A18
A14
A13
A12
A11
A10
A9
A8
A19NC
WE#
RESET#
NC
NC
RY/BY#
A17
A7
A6
A5
A4
A3
A2
1
16
2
3
4
5
6
7
8
17
18
19
20
21
22
23
24
910
11
12
13
14
15
A16
DQ2
BYTE#
VSSDQ15/A-1
DQ7
DQ14
DQ6
DQ13
DQ9
DQ1
DQ8
DQ0
OE#VSS
CE#
A0
DQ5DQ12
DQ4
VCCDQ11
DQ3
DQ10
48
33
47
46
45
44
43
42
41
4039
38
37
36
35
34
25
32
31
30
29
28
27
26
A1
A15
A18
A14
A13
A12
A11
A10
A9
A8
A19
NC
WE#
RESET#
NC
NC
RY/BY#
A17
A7
A6
A5
A4A3
A2
1
16
2
3
4
5
6
7
8
17
18
19
20
2122
23
24
9
10
11
12
13
14
15
A16
DQ2
BYTE#
VSSDQ15/A-1
DQ7
DQ14
DQ6
DQ13
DQ9
DQ1
DQ8
DQ0
OE#VSSCE#
A0
DQ5
DQ12
DQ4
VCCDQ11
DQ3
DQ10
48
33
47
46
45
44
43
42
41
40
39
38
37
36
35
34
25
32
31
30
29
2827
26
Reverse TSOP
Standard TSOP
13
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
16/41
A
CONNECTION DIAGRAMS
Special Handling Instructions
Special handling is required for Flash Memory products
in FBGA packages.
Flash memory devices in FBGA packages may be
damaged if exposed to ultrasonic cleaning methods.
The package and/or data integrity may be compromised
if the package body is exposed to temperatures above150C for prolonged periods of time.
1
2
34
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
2021
22
RESET#
A18
A17A7
A6
A5
A4
A3
A2
A1
A0
CE#
VSSOE#
DQ0
DQ8
DQ1
DQ9
DQ2
DQ10DQ3
DQ11
44
43
4241
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
2524
23
WE#
A19
A8A9
A10
A11
A12
A13
A14
A15
A16
BYTE#
VSSDQ15/A-1
DQ7
DQ14
DQ6
DQ13
DQ5
DQ12DQ4
VCC
SO
A1 B1 C1 D1 E1 F1 G1 H1
A2 B2 C2 D2 E2 F2 G2 H2
A3 B3 C3 D3 E3 F3 G3 H3
A4 B4 C4 D4 E4 F4 G4 H4
A5 B5 C5 D5 E5 F5 G5 H5
A6 B6 C6 D6 E6 F6 G6 H6
D Q1 5/A-1 VSSBYTE#A16A15A14A12A13
DQ13 DQ6DQ14DQ7A11A10A8A9
VCC DQ4DQ12DQ5A19NCRESET#WE#
DQ11 DQ3DQ10DQ2NCA18NCRY/BY#
DQ9 DQ1DQ8DQ0A5A6A17A7
OE# VSSCE#A0A1A2A4A3
FBGATop View, Balls Facing Down
14
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
17/41
PIN CONFIGURATION
A0A19 = 20 addresses
DQ0DQ14 = 15 data inputs/outputs
DQ15/A-1 = DQ15 (data input/output, word mode),
A-1 (LSB address input, byte mode)
BYTE# = Selects 8-bit or 16-bit mode
CE# = Chip enable
OE# = Output enable
WE# = Write enable
RESET# = Hardware reset pin
RY/BY# = Ready/Busy output
(N/A SO 044)
VCC = 3.0 volt-only single power supply
(see Product Selector Guide for speed
options and voltage supply tolerances)
VSS = Device ground
NC = Pin not connected internally
LOGIC SYMBOL
20
16 or 8
DQ0DQ15(A-1)
A0A19
CE#
OE#
WE#
RESET#
BYTE# RY/BY#(N/A SO 044)
15
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
18/41
SDRAM 16Mb H-die(x16) CMOS SDRAM
Rev. 1.4 May 2004
The K4S161622H is 16,777,216 bits synchronous high data rate Dynamic RAM organized as 2 x 524,288 words by 16 bits, fabricated
with SAMSUNGs high performance CMOS technology. Synchronous design allows precise cycle control with the use of system clock I/
O transactions are possible on every clock cycle. Range of operating frequencies, programmable burst length and programmable laten-
cies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
3.3V power supply
LVTTL compatible with multiplexed address
two banks operation
MRS cycle with address key programs
-. CAS Latency ( 2 & 3)
-. Burst Length (1, 2, 4, 8 & full page)
-. Burst Type (Sequential & Interleave)
All inputs are sampled at the positive going edge of the system clock
Burst Read Single-bit Write operation
DQM for masking
Auto & self refresh
32ms refresh period (2K cycle)
GENERAL DESCRIPTION
FEATURES
512K x 16Bit x 2 Banks SDRAM
ORDERING INFORMATION
Part NO. MAX Freq. Interface Package
K4S161622H-TC55 183MHz
LVTTL50pin
TSOP(II)K4S161622H-TC60 166MHz
K4S161622H-TC70 143MHz
K4S161622H-TC80 125MHz
Row & Column address configuration
Organization Row Address Column Address
1Mx16 A0~A10 A0-A7
16
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
19/41
SDRAM 16Mb H-die(x16) CMOS SDRAM
Rev. 1.4 May 2004
VDDDQ0DQ1VSSQDQ2DQ3
VDDQDQ4DQ5VSSQDQ6DQ7
VDDQLDQM
WECAS
RASCSBA
A10/APA0A1A2A3
VDD
12345678910111213141516
171819202122232425
50494847464544434241403938373635
343332313029282726
PIN CONFIGURATION (TOP VIEW)
VSSDQ15DQ14VSSQDQ13DQ12VDDQDQ11DQ10VSSQDQ9DQ8VDDQN.C/RFUUDQMCLK
CKEN.CA9A8A7A6A5A4VSS
50PIN TSOP (II)
(400mil x 825mil)
(0.8 mm PIN PITCH)
PIN FUNCTION DESCRIPTION
Pin Name Input Function
CLK System Clock Active on the positive going edge to sample all inputs.
CS Chip Select
Disables or enables device operation by masking or enabling all inputs except
CLK, CKE and L(U)DQM
CKE Clock Enable
Masks system clock to freeze operation from the next clock cycle.
CKE should be enabled at least one cycle prior to new command.
Disable input buffers for power down in standby.
A0~ A10/AP AddressRow / column addresses are multiplexed on the same pins.
Row address : RA0~ RA10, column address : CA0~ CA7
BA Bank Select AddressSelects bank to be activated during row address latch time.
Selects bank for read/write during column address latch time.
RAS Row Address StrobeLatches row addresses on the positive going edge of the CLK with RAS low.
Enables row access & precharge.
CAS Column Address StrobeLatches column addresses on the positive going edge of the CLK with CAS low.
Enables column access.
WE Write EnableEnables write operation and row precharge.
Latches data in starting from CAS, WE active.
L(U)DQM Data Input/Output MaskMakes data output Hi-Z, tSHZafter the clock and masks the output.
Blocks data input when L(U)DQM active.
DQ0~ 15 Data Input/Output Data inputs/outputs are multiplexed on the same pins.
VDD/VSS Power Supply/Ground Power and ground for the input buffers and the core logic.
VDDQ/VSSQ Data Output Power/GroundIsolated power supply and ground for the output buffers to provide improved noise
immunity.
N.C/RFUNo Connection/
Reserved for Future UseThis pin is recommended to be left No Connection on the device.
17
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
20/41
SDRAM 16Mb H-die(x16) CMOS SDRAM
Rev. 1.4 May 2004
FUNCTIONAL BLOCK DIAGRAM
* Samsung Electronics reserves the right to change products or specification without notice.
Bank Select
Data Input Register
512K x 16
512K x 16
SenseAMP
OutputBuffer
I/OControl
Column Decoder
Latency & Burst Length
Programming Register
AddressRegister
Row
Buffer
RefreshCounter
Row
Decoder
Col.Buffer
LRAS
LCBR
LCKE
LRAS LCBR LWE LDQM
CLK CKE CS RAS CAS WE L(U)DQM
LWE
LDQM
DQi
CLK
ADD
LCAS LWCBR
Timing Register
18
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
21/41
MT1389
Prog ress ive-Scan DVD Player SOCSpecifications are subject to change without notice
MediaTek MT1389is a DVD player system-on-chip (SOC) which incorporates advanced features like high
quality TV encoder and state-of-art de-interlace processing. The MT1389 enables consumer electronicsmanufacturers to build high quality, cost-effective DVD players, portable DVD players or any other homeentertainment audio/video devices.
Based on MediaTeks world-leading DVD player SOC architecture, the MT1389 is the 3 rdgeneration of the DVDplayer SOC. It integrates the MediaTek 2ndgeneration front-end analog RF amplifier and the Servo/MPEG AVdecoder.
The progressive scan of the MT1389 utilized a proprietary advanced motion-adaptive de-interlace algorithm toachieve the best movie/video playback. It can easily detect 3:2/2:2 pull down source and restore the correctoriginal pictures. It also supports a patent-pending edge-preserving algorithm to remove the saw-tooth effect.
MT1389L
DVDPUH
Module
FLASH
DRAM
CVBS, Y/C,Component
SDPIF
Front-panelRemote
Audio DAC
DVD Player System Diagram Using MT1389
Key Features RF/Servo/MPEG Integration
High Performance Audio Processor
Motion-Adaptive, Edge-Preserving De-interlace 108MHz/12-bit, 6 CH TV Encoder
Applications Standard DVD Players
Portable DVD Players
8.2 MT1389
19
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
22/41
MT1389
PRELIMINARY, SUBJECT TO CHANGE WITHOUT NOTICE MTK CONFIDENTIAL, NO DISCLOSURE
General Feature List
Super Integration DVD player single chip
High performance analog RF amplifier Servo controller and data channel processing MPEG-1/MPEG-2/JPEG video Dolby AC-3/DTS/DVD-Audio Unified memory architecture Versatile video scaling & quality
enhancement OSD & Sub-picture 2-D graphic engine Built-in clock generator Built-in high quality TV encoder Built-in progressive video processor Audio effect post-processor Audio input port
High Performance Analog RF Amplifier
Programmable fc Dual automatic laser power control Defect and blank detection RF level signal generator
Speed Performance on Servo/Channel Decoding
DVD-ROM up to 4XS CD-ROM up to 24XS
Channel Data Processor Digital data slicer for small jitter capability Built-in high performance data PLL for
channel data demodulation EFM/EFM+ data demodulation Enhanced channel data frame sync protection
& DVD-ROM sector sync protection
Servo Control and Spindle Motor Control
Programmable frequency error gain andphase error gain of spindle PLL to controlspindle motor on CLV and CAV mode
Built-in ADCs and DACs for digital servocontrol
Provide 2 general PWM Tray control can be PWM output or digital
output
Embedded Micro controller
Built-in 8032 micro controller Built-in internal 373 and 8-bit programmable
lower address port
1024-bytes on-chip RAM Up to 4M bytes FLASH-programming
interface Supports 5/3.3-Volt. FLASH interface Supports power-down mode Supports additional serial port
DVD-ROM/CD-ROM Decoding Logic
High-speed ECC logic capable of correctingone error per each P-codeword orQ-codeword
Automatic sector Mode and Form detection Automatic sector Header verification Decoder Error Notification Interrupt that
signals various decoder errors Provide error correction acceleration
Buffer Memory Controller
Supports 16Mb/32Mb/64Mb/128Mb SDRAM Supports 16-bit SDRAM data bus Provide the self-refresh mode SDRAM Block-based sector addressing Support 3.3 Volt. DRAM Interface
Video Decode
Decodes MPEG1 video and MPEG2 main level,main profile video (720/480 and 720x576)
Smooth digest view function with I, P and Bpicture decoding
Baseline, extended-sequential andprogressive JPEG image decoding
Support CD-G titles
Video/OSD/SPU/HLI Processor
Arbitrary ratio vertical/horizontal scaling ofvideo, from 0.25X to 256X
65535/256/16/4/2-color bitmap format OSD, 256/16 color RLC format OSD Automatic scrolling of OSD image Slide show transition as DVD-Audio
Specification
2-D Graphic Engine
Support decode Text and Bitmap Support line, rectangle and gradient fill Support bitblt Chroma key copy operation Clip mask
20
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
23/41
MT1389
PRELIMINARY, SUBJECT TO CHANGE WITHOUT NOTICE MTK CONFIDENTIAL, NO DISCLOSURE
Audio Effect Processing
Dolby Digital (AC-3)/EX decoding DTS/DTS-ES decoding MLP decoding for DVD-Audio
MPEG-1 layer 1/layer 2 audio decoding MPEG-2 layer1/layer2 2-channel audio High Definition Compatible Digital (HDCD) Windows Media Audio (WMA) Advanced Audio Coding (AAC) Dolby ProLogic II Concurrent multi-channel and downmix out IEC 60958/61937 output
- PCM / bit stream / mute mode- Custom IEC latency up to 2 frames
Pink noise and white noise generator Karaoke functions
- Microphone echo- Microphone tone control- Vocal mute/vocal assistant- Key shift up to +/- 8 keys- Chorus/Flanger/Harmony/Reverb
Channel equalizer 3D surround processing include virtual
surround and speaker separation
TV Encoder
Six 108MHz/12bit DACs Support NTSC, PAL-BDGHINM, PAL-60 Support 525p, 625p progressive TV format
Automatically turn off unconnected channels Support PC monitor (VGA) Support Macrovision 7.1 L1, Macrovision
525P and 625P CGMS-A/WSS Closed Caption
Progressive Output
Automatic detect film or video source 3:2 pull down source detection Advanced Motion adaptive de-interlace Edge Preserving
Minimum external memory requirement
Audio Input
Line-in/SPDIF-in for versatile audioprocessing
Outline
256-pin LQFP package 3.3/1.8-Volt. Dual operating voltages
21
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
24/41
C402
104
C401
104
1 23
U402
HS0038B
K403
K401
K402
VD401
1N4
148
KEY3
KEY2
KEY1
S1
LEDST
LEDCK
LEDAT
VCC
GND
C403
104
IR
R401
51K
R404
10K
R402
10K
R403
10K
TC402
100u
F/16V
IR
OSC
1
DOUT
2
DIN
3
CLK
4
STB
5
K1
6
K2
7
K3
8
VDD
9
NC
13
SEG1/KS1
10
SEG2/KS2
11
SEG3/KS3
12
SEG4/KS4
14
SEG5/KS5
15
G
R6
23
SEG6/KS6
16
SEG7/K
S7
17
SEG8/K
S8
18
SEG9/K
S9
19
SEG10/KS
10
20
SEG
11
21
SEG12/G
R7
22
VDD
25
GND
26
G
R5
24
G
R4
27
G
R3
28
GND
29
G
R2
30
G
R1
31
GND
32
U401
PT6961
LEDAT
LEDCK
LEDST
KEY1
KEY2
KEY3
S1
S2
S3
S4
S5
S7
S10
G9
G8
G12
G6
VCC
VCC
VCC
TC403
100u
F/16V
S11
R405
100R
TC404
100u
F/16V
VCC
G
1
G
2
G
3
G
4
G
5
S6
G7
S8
S9
G10
G11
S12
5 4 3 2 1
12
11
10987
6
LED-4
01
LED-S
OCK(1)
C404
R407
R408
R4
06
TC
401O
K
L401
32
1
VR401
IN
VR2
VR1
2 3 41 5 6 7 8 910
11
XS401
XS11
OK
INVR1
VR2
DET
5 4 3 2 17 6
MIC401
1 2R409
4.7
K
VCC
DET
FRONT SCHEMATIC DIAGRAM
22
9. SCHEMATIC & PCB WIRING DIAGRAM
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
25/41
RONT SCHEMATIC DIAGRAM
23
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
26/41
U503
LM431A
C515
104
L505
10u
H/1A
C506
473
L507
10u
H/2A
BC
501
~275V104
L501
F501
T1.6A
/250V
R
K A
!
!
!
R509
10K
R508
3.3
K
R506
330
R505
10o
hm
R503
39K/2W
!
BCN502
SW-S
PST
!
!
U502
2501
TC502
47uF
/50V
TC501
47u
F/400V
D505
HER107
C502
103/1KV
C503
101/1KV
L503
FB
BC503
~400V221
+9V
C504
104
TC504
470u
F/16V
TC512
47u
F/50V
TC506
1000u
F/10V
TC505
1000u
F/10V
TC510
1000uF
/10V
D508
HER105
TC503
470u
F/16V
R511
330R/1W
R507
1K
R501
680K2W
!
! !
D510
SR560
D506
HER105
D509
1N4007
D511
HER105
+3
.3V T
C513
100u
F/16V
D503
1N4007
A 1
K2
D502
1N4007
D504
1N4007
D501
1N4007
C508
104
C510
104
-9V
+5V
ZD502
9.1
V/1W
VDD
4
D5
S 2
FB
3
D6
D7
D8
S 1
U5
01
VIPER22
R512
9.1
K
D513
1N4007
1
2
3
4
5
6
7
8
9
10
T501
EEL19H
-9V
GND
+3
.3V
+5V
GND
+9V
GND
2 3 41 5 6 7
CN502
XS07
21
CN501
XS02
LED+5V
12
BCN501
~220V
D507
HER105
TC507
1000
uF/10V
LED+5V
POWER BOARD SCHEMATIC DIAGRAM
24
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
27/41
POWER BOARD SCHEMATIC DIAGRAM
25
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
28/41
R61415K
R61710K
R6165.6K
R626
1K
C610
561
C612
561
C613
104
C614
104
C615
392
R621
10K
R6224.7K
R624
10K
R619
1K
R
612
1
0K
32
1
84
U601A
4558
+9VA
32
1
84
U602A
4558
C607
101
R613
30K
56
7
U602B
4558
C620
101
R609
30K
C605
101
R610
30K
C609
104
TC608
22uF
/16V
R615
10K
TC607
4.7
uF/16V
R607
1K
R608
20K
R618
15KC
608
392
TC609
47u
F/16V
R629
27K
1
2TC605
22U/16V
TC603
4.7
U/16V
-9VA
C619
102
R628
4.7
K
R62010K
R633
10R1/6W
TC615
100U/16V
C601
104
R632
10R1/6W
TC616
100U/16V
C602
104
+9V
+9VA
-9V
-9VA
C622
104
C623
104
OKA
TC610
4.7
uF/16V
TC613
4.7
U/16V
VDD 1
REF 2
AGND 3
DGND 4
CLKO 5
VCO 6
CC1 7
CC2 8
OP1-OUT9
OP1-IN10
OP2-IN11
OP2-OUT12
LPF2-IN13
LPF2-OUT14
LPF1-OUT15
LPF1-IN16
U603
PT2399
TC611
4.7
U/16V
+9VA
TC621 4
.7uF
/16V
C616
103
+5V
-9VA
IN
VR1
VR2
GND
OKA
IN VR1
VR2
+5V
DET
2 3 41 5 6 7
XS601
OKA
2 3 41 5 6
XS602
XS06
DET
+9V
-9V
+5V
GND
OK SCHEMATIC DIAGRAM
26
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
29/41
OK SCHEMATIC DIAGRAM
27
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
30/41
AGND
AGNDVGND
LFE
CC
SR
SL
RLVIEDO
Pb
Y1
Pr
PDAT1
PDAT2
VCC
SPDIF
L R
RED
WHITE
L705
FB
L706
FB
C705
102
C706
102
2 3 41 5 6 8 9 10
7 11
12
14
15
16
13
17
18
20
21
22
19
23
24
25
26
28
27
XS701
XS28
Y C
A(B)OUT
1
A(A)OUT
3
RETURN
5
BLUEI/O
7
RETURN
9
GREENI/O
11
RETURN
13
REDI/O
15
RETURN
17
V-O
UT
19
GND
21
A(B)IN
2
A-C
OM
4
A(A)IN
6
FUNCSW
8
CONT
10
NC
12
RETURN
14
BLKI/O
16
TRTURN
18
V-I
N
20
JK706
VJS3921
R704
4.7
K
R705
75R
V701
8050
V702
8050
R708
33R
R709
330R
R710
2.2
K
+10V
A+10V
AGND
PDAT0
V703
8050
R711
1K
R712
2.2
K
A+10V
PDAT2
C716
104
AGND
VCC
AGND
R70
7
A+10V
AGND
AGND
VCC
PDAT0
+10V
VGND
VGND
Pr
L709
FBSMT
L708
FBSMT
L707
FBSMT
Y1
Pb
VGND
GREEN
BLUE
RED
BG R
1
2
3 4
5
6JK702
RCA-4
07
BLACK
TC702
1000uF
/10V
TC703
220uF
/16V
TC704
220uF
/16V
L710
FBSMT
SPDIF
R701
22
0R
C710104
L713
FCM
L714
FCM
C707
105
VGND
R713
0R
AGND
VGND
R703
68R
VIN
1
VCC
2
GND
3JK705
OPTICAL
VCC
VGND
C71
1
104
SPDIF
L712
FBSMT
L711
FBSMT
43
2 1
JK703A
S-V
IDEO
5
7
6
JK703B
V-OU
T5
R706
2.2
R
TC701220u
F
R702
10
0R
VIEDO
TC705
220uF
/16V
TC706
220uF
/16V
Y C
C715
224
VGND
VGND
1
2
3JK701
AV8-2
R717
0R
R718
0R
R7190R
R7140R
R7150R
R716
0R
OUTPUT BOARD SCHEMATIC DIAGRAM
28
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
31/41
OUTPUT BOARD SCHEMATIC DIAGRAM
29
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
32/41
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
33/41
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
34/41
R2105
330R
R2108
10K
+9V
R2109
150R
R2104
1K
VD205
1N4148
+9V
R2103
1K
AGND
VD206
1N4148
-9V
AGND
MUTE-1
TC235
220uF
/16V
TC234
47uF
/16V
AGND
R2106
10K
Q212
2SC1815-Y
Q218
1015
Q219
1015
C2134
683(DNS)
C2131
0R
C2132
683(DNS)
SW /C
SR#
SL#
R L
TC225
10uF
/16V
TC226
10uF
/16V
TC227
10u
F/16V
TC228
10u
F/16V
TC229
10u
F/16V
TC230
10u
F/16V
R2
150
4.7
K
R2151
4.7
K
C2128
0R
C2127
102
C2126
101R
2149
20K
R214120K
C2120
101
C2121
102
C2137
683(DNS)
R2143
4.7
K
R2142
4.7
K
R2138
4.7
K
R2139
4.7
K
C2119
0R
C2118
102
C2117
101
R2137
20K
R2
146
4.7
K
R2147
4.7
KC2124
102
C2123
101
R2145
20K
R2134
4.7
K
R2135
4.7
KC2115
102
C2114
101
R2133
20K
R2129
20K
C2111
101
C2112
102
R2131
4.7
K
R2130
4.7
K
+9V
+9V
+9V
+9V
+9V +
9V
32
1
48
U219A
4580 56
7
48
U219B
4580
32
1
48
U221A
458056
7
48
U220B
4580
32
1
48
U220A
4580
56
7
48
U221B
4580
AGNDA
GND
AGND
AGND
AGND
AGND
-9V
-9V
-9V
-9V
-9V -
9V
TC224
10u
F/16V
TC223
10u
F/16V
TC222
10u
F/16V
TC221
10u
F/16V
TC240
10u
F/16V
TC241
10u
F/16V
CH-L
CH-R
CH-S
L
CH-S
R
CH-C
CH-S
W
AGND
R2123
1KR2121
1KR2120
1KR2117
1K R2124
1KR2122
1KR2119
1KR2118
1K
R2111
100K
R2112
100K
R2113
100K
R2114
100K
MUTE-1
Q208
2SC1815-Y
S
Q207
2SC1815-Y
S
Q205
2SC1815-Y
S
Q206
2SC1815-Y
SR2127
1K
R2125
1K
R2128
1K
R2126
1K
R2115
100K
R2116
100K
Q210
2SC1815-Y
S
Q209
2SC1815-Y
S
C2138
104
C2139
104
C2140
104
+9V
AGND C
2141
104
C2142
104
C2143
104
-9V
AGND
SDATA2
SDATA1
SDATA0
SLRCK
SACLK
SBCLK
SCL
SDA
RESET#
LL
RS
RR
LS
LFE#
C#
R2132
20K
C2116
102O
KA
AGND
R2156
20K
R2136
6.8
K
R2148
6.8
K
R21526
.8K
R21536
.8K
R21546
.8K
R21556
.8K
C2122
122
C2129
122
C2130
122
C2133
122
C2135
122
C2136
122
VOICE-D
ET
VLS
1
SDIN1
2
SDIN2
3
SDIN3
4
SCLK
5
LRCK
6
MCLK
7
VD
8
GND
9
RST
10
SCL
11
SDA
12
CS
13
VLC
14
MUTEC1
28
AOUTA1
27
AOUTB1
26
MUTEC2
25
AOUTA2
24
AOUTB2
23
VA
22
GND
21
AOUTA3
20
AOUTB3
19
MUTEC3
18
VQ
17
FILT+
16
M2
15
U207
CS4360
C2154
104
C2153
104
DV33
MUTE1
C2155
104
TC236
10uF
/16V
AVCC
C2157
104
TC232
10uF
/16V
C2156
104
TC233
10uF
/16V
AGND
R282
0R
TC231
10uF
/16V
MUTE2
MUTE3
RR
RS
LL
LS
LFE#
C#
MUTE1
Q211
1015
R2102
1KR
2101
1K
VD207
1N4148
VD208
1N4148
VD209
1N4148
MUTE2
MUTE3
TC238
2.2
uF/16V
(DNS)
VCC
R225
0R(DNS)
R226
0R
AVCC
R291
33R
ACLK
SACLK
R292
33R
R293
33R
R294
33R
R295
33R
R296
33R
ABCK
SBCLK
ALRCK
SLRCK
ASDAT0
SDATA0
SDATA1
SDATA2
ASDAT1
ASDAT2
R2107
0R
AGND
Cc
LFE
SL
AGND
SRR
tLt
MUTEA
VL
1
MCLK
2
SCLK
3
SDATA
4
VA
5
GND
6
LRCK
7
DIN
8
RST
16
VQ
15
AINL
14
AINR
13
REF
_G
12
FILT+
11
TST
10
DIF
9
U210
CS5333(16)
C287
104
C284
104
DV33
SACLK
SBCLK
AMDAT
SLRCK
R289
47K
C286
105
C288
102
TC242
1u
F/16V
TC243
1u
F/16V
R2180
150R
RESET#
OKA
TC244
10u
F/16V
DV33
C285
105
R279
0R(DNS)
R268
0R(DNS)
R269
0R(DNS)
R278
0R(DNS)
DV33
R288
4.7K
RST
1
SDA
2
SCLK
3
LRCK
4
MCLK
5
DIF1
6
DIF0
7
DEM0
8
MUTEC
16
AOUTA
15
VA
14
AGND
13
AOUTB
12
REF-G
ND
11
VQ
10
FILT+
9
U206
CS4340
R284
0R
R285
0R
R286
0R
RESET#
SDATA0
SBCLK
SLRCK
SACLK
MUTE1
LL
AVCC
AGND
RR
AGND
VQ#
FILT+
VQ#
FILT+
MIAN SCHEMATIC DIAGRAM
32
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
35/41
MIAN SCHEMATIC DIAGRAM
33
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
36/41
DV314SMATERIAL LIST
1. MAIN FRONT PANEL
MATERIAL CODE MATERIAL NAME SPECIFICATIONS UNIT QUANTITY LOCATION
5233123 SOFT SPONGE SPACER 101013 DOUBLE-FACED, HARD PCS 1 1PC FOR IR SENSOR
5233021 SOFT SPONGE SPACER 13813.5 DOUBLE-FACED, HARD PCS 2 2PCS FOR LED AND
FRONT PANEL PCB
1340064 LIGHT TOUCH
RESTORE SWITCH KFC-A06-2WB L3.8 PCS 3 K401~K403
0260241 CD CD11C 16V4.7U20%47 1.5 PCS 1 TC401
0260206 CD CD11C 10V100U20%57 2 PCS 3 TC402,TC403,TC404
1200574 DISPLAY SCREEN TOF-2482AG-B18 PCS 1 LED401
2360024 IR SENSOR LTOP-4338 PCS 1 U402
2360002 IR SENSOR HS0038B PCS 1 U402
2360006 IR SENSOR 9052-4 PCS 1 U402
0881426 IC PT6961 SOP PCS 1 U401
1980048 MICROPHONE SOCKET ST-403-070-100 PCS 1 MIC401
0160184 ROTATED
POTENTIOMETER WH09JTC1Z11-A10K-F30 PCS 1 VR401
2121525 FLAT CABLE
12-6/6P150/100 2.0 T3 WITH L
NEEDLE REVERSE PCS 1 XS401
0090181 SMD RESISTOR 1/16W 1005% 0603 PCS 1 R405
0090192 SMD RESISTOR 1/16W 51K 5% 0603 PCS 1 R401
0090023 SMD RESISTOR 1/16W 10K 5% 0603 PCS 4 R402,R403,R404,R407
0090019 SMD RESISTOR 1/16W 4.7K 5% 0603 PCS 1 R409
0090012 SMD RESISTOR 1/16W 5605% 0603 PCS 1 R408
0090026 SMD RESISTOR 1/16W 22K 5% 0603 PCS 1 R406
0310084 SMD CAPACITOR 50V 104 +80%-20% 0603 PCS 3 C401,C402,C403
0310072 SMD CAPACITOR 50V 103 10% 0603 PCS 1 C404
0390095 SMD MAGNETIC BEADS FCM1608K-221T05 PCS 2 L401,L402
0700007 SMD DIODE 1N4148 PCS 1 VD401
1631681 PCB 4703A-1 PCS 1
2. POWER BOARD
MATERIAL CODE MATERIAL NAME SPECIFICATIONS UNIT QUANTITY LOCATION
0000294 CARBON FILM
RESISTOR 1/4W10K5% SHAPED 10 PCS 1 R507
0010256 METAL FILM RESISTOR 1/4W3.6K1% SHAPED 10 PCS 1 R508
0000461 CARBON FILM
RESISTOR
1/4W9.1K5% SHAPED 10 PCS 1 R512
0010064 METAL FILM RESISTOR 1/4W10K1% SHAPED 10 PCS 1 R509
0000431 CARBON FILM
RESISTOR 1/4W75 5% SHAPED 10 PCS 1 R505
0010135 METAL OXIDE FILM
RESISTOR 2W39K5% SHAPED FLAT 159 PCS 1 R503
0580054 VOLTAGE REGULATOR
DIODE 9.1V 1W PCS 1 ZD502
0010250 METAL OXIDE FILM
RESISTOR 1W22
5
SHAPED R 158 PCS 1 R511
0000380 CARBON FILM
RESISTOR 1/4W510 5% SHAPED 10 PCS 1 R506
0070001 HIGH VOLTAGERESISTOR
1/2W680K5% PCS 1 R501
0570005 DIODE 1N4007 PCS 4 D501~D504
0200138 PORCELAIN
CAPACITOR 50V 104 20% 5mm PCS 4 C504,C508,C510,C515
0200224 PORCELAIN
CAPACITOR 1000V 103 +80%-20% 7.5mm PCS 1 C502
34
10. SPARE PARTS LIST
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
37/41
0200223 PORCELAIN
CAPACITOR 1000V 101 +80%-20% 7.5mm PCS 1 C503
0200228 PORCELAIN
CAPACITOR 1000V 101 10% 7.5mm PCS 1 C503
0210049 TERYLENE CAPACITOR 50V 473 10% 6mm PCS 1 C506
0260559 CD CD11T 50V47u20%612 2.5 PCS 2 TC502,TC512
0260563 CD KM 400V47U20%1820 7.5 PCS 1 TC501
0260557 CD CD11T 16V100u20%612 2.5 PCS 1 TC513
0260594 CD CD11T 25V220U20%812 3.5 PCS 2 TC503,TC504
0260560 CD CD11T 10V1000u20%816 3.5 PCS 3 TC505,TC506,TC510
0390057 MAGNETIC BEADS
INDUCTOR RH354708 PCS 1 L503
0410010 CHOKE COIL VERTICAL 10UH 1A 5mm PCS 1 L505
0410011 CHOKE COIL VERTICAL 10UH 2A 5mm PCS 1 L507
1080011 PHOTOELECTRIC
COUPLER HS817 PCS 1 U502
1080006 PHOTOELECTRIC
COUPLER PC817 PCS 1 U502
0570011 DIODE RL202 PCS 2 D513,D509
0570013 DIODE HER105 PCS 3 D506,D508,D511
0570014 DIODE HER107 PCS 1 D505
0680010 SCHOTTKY DIODE SR560 DO-27 PCS 1 D510
0880553 IC LM431ACZ TO-92 PCS 1 U503
0880581 IC TL431C TO-226AA(LP) PCS 1 U503
0880800 IC 431L TO-92 PCS 1 U503
0882041 IC MIK431C TO-92 PCS 1 U503
0210066 TERYLENE CAPACITOR 275V 104 20% 15mm PCS 1 BC501
0210070 TERYLENE CAPACITOR 275V 104 10% 15mm PCS 1 BC501
0200267 CERAMIC CAPACITOR CT81 250VAC22120% 10mm PCS 1 BC503
0200268 CERAMIC CAPACITOR CT81 250VAC22110% 10mm PCS 1 BC503
0460394 SWITCHING POWER
TRANSFORMER BCK-19-0179 PCS 1 T501
1000004 POWER GRID FILTER UT-20 40mH 20% 1013 PCS 1 L501
1563407 PCB 5501A-4 PCS 1
2100003 CONNECTION CORDS 0.6 SHAPED 7.5mm PCS 2 JP501,JP503
2100010 CONNECTION CORDS 0.6 SHAPED 5mm PCS 1 JP502
2100004 CONNECTION CORDS 0.6 SHAPED 10mm PCS 1 R517
2300021 FUSE T1.6AL 250V PCS 1 F501
1940045 SOCKET 2P 8.0mm 2# PCS 2 BCN501,BCN502
1940023 SOCKET 7P 2.0mm PCS 1 CN502
1940022 SOCKET 4P 2.0mm PCS 1 CN501
0881933 IC VIPER22A DIP8 PCS 1 U501
3870115 GROUND CHIP OF
POWER BOARD AB903 PCS 2 G501,G502
3. OK BOARD
MATERIAL CODE MATERIAL NAME SPECIFICATIONS UNIT QUANTITY LOCATION
0000129 CARBON FILM
RESISTOR 1/6W1K5% SHAPED 7.5 PCS 3 R607,R619,R626
0000133 CARBON FILM
RESISTOR 1/6W4.7K5% SHAPED 7.5 PCS 2 R622,R628
0000134 CARBON FILM
RESISTOR 1/6W5.1K5% SHAPED 7.5 PCS 1 R616
0000137 CARBON FILM
RESISTOR 1/6W10K5% SHAPED 7.5 PCS 5
R617,R621,R620,R624,R6
12
35
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
38/41
0000118 CARBON FILM
RESISTOR 1/6W10
5% SHAPED 7.5 PCS 2 R632,R633
0000338 CARBON FILM
RESISTOR 1/6W15K5% SHAPED 7.5 PCS 2 R614,R618
0000341 CARBON FILM
RESISTOR 1/6W18K5% SHAPED 7.5 PCS 1 R615
0000144 CARBON FILM
RESISTOR 1/6W47K5% SHAPED 7.5 PCS 1 R608
0000141 CARBON FILM
RESISTOR 1/6W27K5% SHAPED 7.5 PCS 1 R629
0000142 CARBON FILMRESISTOR
1/6W33K5% SHAPED 7.5 PCS 2 R609,R613
0000339 CARBON FILM
RESISTOR 1/6W3.3K5% SHAPED 7.5 PCS 1 R610
0260127 CD CD11 16V4.7U20%511 2 PCS 6
TC603,TC607,TC610,TC6
11,
TC613,TC621
0260021 CD CD11 16V22U20%511 2 PCS 1 TC605
0260258 CD CD11 10V47U20%57 2 PCS 1 TC609
0260200 CD CD11C 16V47U20%57 2 PCS 1 TC609
0260040 CD CD11 25V100U20%612 2.5 PCS 3 TC608,TC615,TC616
0200106 PORCELAINCAPACITOR
50V 101 +80%-20% 5mm PCS 3 C607,C605,C620
0200125 PORCELAIN
CAPACITOR 50V 102 +80%-20% 5mm PCS 1 C619
0200206 PORCELAIN
CAPACITOR 50V 103 +80%-20% 5mm PCS 1 C616
0200139 PORCELAIN
CAPACITOR 50V 104 +80%-20% 5mm PCS 7
C601,C602,C622,C609,C6
13,C614,C623
0200153 PORCELAIN
CAPACITOR 50V 392 20% 5mm PCS 2 C608,C615
0200117 PORCELAIN
CAPACITOR 50V 561 +80%-20% 5mm PCS 2 C610,C612
0880124 IC NJM4558D DIP PCS 2 U601,U602
1940005 SOCKET 6P 2.0mm PCS 1 XS601
1940023 SOCKET 7P 2.0mm PCS 1 XS602
2100003 CONNECTION CORDS
0.6 SHAPED 7.5mm PCS 7 JP601~JP607
1563408 PCB 6962S-3 PCS 1
0880230 IC PT2399 DIP PCS 1 U603
4. AV BOARD
MATERIAL CODE MATERIAL NAME SPECIFICATIONS UNIT QUANTITY LOCATION
0000171
CARBON FILM
RESISTOR 1/4W685% PCS 1 R703
0000362 CARBON FILM
RESISTOR 1/4W220
5% SHAPED 10 PCS 1 R701
0000278 CARBON FILM
RESISTOR 1/4W330 5% SHAPED 10 PCS 1 R709
0000273 CARBON FILM
RESISTOR 1/4W33
5% SHAPED 10 PCS 1 R708
0000276 CARBON FILM
RESISTOR 1/4W100 5% SHAPED 10 PCS 1 R702
0000268 CARBON FILM
RESISTOR 1/4W2.2
5% SHAPED 10 PCS 1 R706
0000289
CARBON FILM
RESISTOR 1/4W4.7K5% SHAPED 10 PCS 1 R704
0000283 CARBON FILM
RESISTOR 1/4W1K5% SHAPED 10 PCS 1 R711
0000286 CARBON FILM
RESISTOR 1/4W2.2K5% SHAPED 10 PCS 2 R710,R712
0000431 CARBON FILM
RESISTOR 1/4W75
5% SHAPED 10 PCS 1 R705
36
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
39/41
0200125 PORCELAIN
CAPACITOR 50V 102 +80%-20% 5mm PCS 2 C705,C706
0200139 PORCELAIN
CAPACITOR 50V 104 +80%-20% 5mm PCS 4 C707,C710,C711,C716
0200237 PORCELAIN
CAPACITOR 50V 224 10% 5mm PCS 1 C715
0200298 PORCELAIN
CAPACITOR 50V 22420% 5mm PCS 1 C715
0090001 SMD RESISTOR 1/16W 05% 0603 PCS 6 R714~R719
0780050 TRIODE S8050D PCS 3 V701~V703
0390057 MAGNETIC BEADS
INDUCTOR RH354708 PCS 10 L713,L714,L705~L712
1090045 ELECTRO-OPTIC
TRANSFORMER TX179ATW PCS 1 JK705
1090024 ELECTRO-OPTIC
TRANSFORMER TX179AT PCS 1 JK705
1910078 TERMINAL SOCKET AV4-8.4-6G-3 PCS 1 JK702
1910129 TERMINAL SOCKET SA-001-012 BLACK IRON SHEET
SCREEN-SHIELDED PCS 1 JK703
1910062 TERMINAL SOCKET AV2-8.4--6G PCS 1 JK701
1940140 CABLE SOCKET 14P 1.0mm STRAIGHT DUAL LINE
PLUG
PCS 1 XS701
2100004 CONNECTION CORDS
0.6 SHAPED 10mm PCS 12 J P701~JP711,R707
1860029 SCART SOCKET SCART-01 PCS 1 JK706
1563282 PCB 7962S-2 PCS 1
5. DECODE BOARD
MATERIAL CODE MATERIAL NAME SPECIFICATIONS UNIT QUANTITY LOCATION
0090001 SMD RESISTOR 1/16W 05% 0603 PCS 36
L210~L215,R201~R204,R
212,R228,R234,R236,R24
5,R247,R222,R251,R255,
R257,R258,R298,R299,R3
03,R318,R331,R2159,R29
7,R284~R286,R287,R290,
R2183,R2107,R283
0090006 SMD RESISTOR 1/16W 755% 0603 PCS 7 R233,R261,R270,R273,R2
74,R276,R280
0100034 SMD RESISTOR
NETWORKS 1/16W05% 06034 8P PCS 4 RN201~RN204
0000375 CARBON FILM
RESISTOR 1/4W2.25% PCS 1 R326
0090272 SMD RESISTOR 1/16W15% 0603 PCS 6 R304~R307,R321,R340
0090003 SMD RESISTOR 1/16W 105% 0603 PCS 2 R301,R302
0090005 SMD RESISTOR 1/16W 335% 0603 PCS 14
R231,R232,R256,R263~R
267,R291~R294,R2162,L2
02
0090232 SMD RESISTOR 1/16W 1505% 0603 PCS 2 R2109,R2180
0090009 SMD RESISTOR 1/16W 3305% 0603 PCS 4 R2105,R221,R277,R281
0090011 SMD RESISTOR 1/16W 4705% 0603 PCS 2 R325,R327
0090013 SMD RESISTOR 1/16W 6805% 0603 PCS 2 R259,R260
0090014 SMD RESISTOR 1/16W 1K 5% 0603 PCS 11 R213,R215,R2101~R2104,
R2117~R2120,R254
0090016 SMD RESISTOR 1/16W 1.5K 5% 0603 PCS 3 R323,R324,R243
0090249 SMD RESISTOR 1/16W 5105% 0603 PCS 1 R214
0090018 SMD RESISTOR 1/16W 3.3K 5% 0603 PCS 1 R242
0090019 SMD RESISTOR 1/16W 4.7K 5% 0603 PCS 8 R238~R240,R2130,R2131,
R2134,R2135,R2140
37
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
40/41
0090021 SMD RESISTOR 1/16W 6.8K 5% 0603 PCS 2 R2136,R2148
0090023 SMD RESISTOR 1/16W 10K 5% 0603 PCS 12
R208,R229,R252,R309,R3
11,R313,R314,R329,R330,
R339,R2164,R2106
0090024 SMD RESISTOR 1/16W 15K 5% 0603 PCS 2 R209,R223
0090025 SMD RESISTOR 1/16W 20K 5% 0603 PCS 6 R211,R312,R315,R316,R2
129,R2133
0090255 SMD RESISTOR 1/16W24K5% 0603 PCS 2 R2132,R2156
0090188 SMD RESISTOR 1/16W 18K 5% 0603 PCS 1 R210
0090197 SMD RESISTOR 1/16W 150K 5% 0603 PCS 2 R319,R320
0090231 PRECISION SMD
RESISTOR 1/16W 680K 1% 0603 PCS 2 R317,R322
0090319 PRECISION SMD
RESISTOR 1/16W 750K 1% 0603 PCS 1 R227
0090034 SMD RESISTOR 1/16W 100K 5% 0603 PCS 6 R224,R308,R310,R2111,R
2112,R246
0260019 CD CD11 16V10U20%511 2 PCS 10
TC201,TC202,TC217,TC2
32,TC233,TC236,TC240,
TC241,TC225,TC226
0260028 CD CD11 16V220U20%612 2.5 PCS 8 TC207~TC209,TC211,TC
213,TC235,TC245,TC301
0260025 CD CD11 16V47U20%511 2 PCS 14
TC204~TC206,TC210,TC234,TC237,TC302~TC304
,TC308,TC309,TC247,TC
248,TC246
0310085 SMD CAPACITOR 50V 20P 5% NPO 0603 PCS 2 C222,C232
0310190 SMD CAPACITOR 50V 27P 5% NPO 0603 PCS 2 C275,C276
0310045 SMD CAPACITOR 50V 47P 5% NPO 0603 PCS 17
C262~C265,C266,C289,C
290,C292,C293,C295,C29
6,C298,C299,C2101,C210
2,C2104,C2105
0310047 SMD CAPACITOR 50V 101 5% NPO 0603 PCS 4 C233,C2111,C2114,C206
0310051 SMD CAPACITOR 50V 331 5% NPO 0603 PCS 2 C212,C213
0310048 SMD CAPACITOR 50V 151 5% NPO 0603 PCS 2 C304,C306
0310084 SMD CAPACITOR 50V 104 +80%-20% 0603 PCS 77
C207,C211,C214,C216,C2
17,C224,C226~C231,C234
~C239,C241~C254,C256~
C259,C267~C274,C279,C
280~C282,C301~C303,C3
05,C309,C311,C312,C213
8~C2143,C2155~C2157,C
2160,C2161,C2163,C2164,
C2168,C2169,C2166,C217
0~C2175
0310058 SMD CAPACITOR 25V 104 +80%-20% 0603 PCS 77
C207,C211,C214,C216,C2
17,C224,C226~C231,C234
~C239,C241~C254,C256~
C259,C267~C274,C279,C
280~C282,C301~C303,C3
05,C309,C311,C312,C213
8~C2143,C2155~C2157,C
2160,C2161,C2163,C2164,
C2168,C2169,C2166,C217
0~C2175
0310234 SMD CAPACITOR 16V 105 +80%-20% 0603 PCS 6 C201~C204,C221,C240
0310066 SMD CAPACITOR 50V 102 10% 0603 PCS 9C2112,C2115,C223,C278,C255,C291,C294,C297,C2
116
0310231 SMD CAPACITOR 50V 122 10% 0603 PCS 2 C2122,C2129
0310067 SMD CAPACITOR 50V 152 10% 0603 PCS 1 C215
0310068 SMD CAPACITOR 50V 222 10% 0603 PCS 2 C307,C310
38
-
7/25/2019 DVD BBK Dv314s 1389 Service Manual
41/41
0310201 SMD CAPACITOR 50V 153 10% 0603 PCS 1 C210
0310055 SMD CAPACITOR 16V 333 10% 0603 PCS 1 C225
0310056 SMD CAPACITOR 16V 473 10% 0603 PCS 2 C219,C220
0310362 SMD CAPACITOR 16V474 +80%-20% 0603 PCS 1 C218
0390044 SMD INDUCTOR 10UH 10% 2012 PCS 2 L303,L306
0390096 SMD INDUCTOR 1.8UH 10% 1608 PCS 6 L243~L248
0390057 MAGNETIC BEADS
INDUCTOR RH354708 PCS 11
L205,L217,L220,L221,L2
22,L223,L227,L228,L226,
L302,l239
0390095 SMD MAGNETIC BEADS FCM1608K-221T05 PCS 35
, , ~ ,
34~L236,L238,L250,L309,
L229~L233,L301,L304,L3
05,L307,L308,L310~L312,
L314,L316~L324
0090106 SMD RESISTOR 1/16W 4.75% 0603 PCS 1 L206
0700007 SMD DIODE 1N4148 PCS 16 VD201,VD205~VD207,VD
210~VD221
0700001 SMD DIODE LS4148 PCS 16 VD201,VD205~VD207,VD
210~VD221
0700002 SMD DIODE LL4148 PCS 16 VD201,VD205~VD207,VD
210~VD2210780029 TRIODE C8050 PCS 2 V307,V308
0780030 TRIODE 8550C PCS 2 V306,V309
0780062 SMD TRIODE 9014C PCS 1 V310
0780033 TRIODE 9015C PCS 1 Q204
0780020 TRIODE C1815Y PCS 1 Q212
0780197 SMD TRIODE C1815 PCS 2 Q205,Q206
0780043 TRIODE 2SA1015 PCS 3 Q211,Q218,Q219
0780040 SMD TRIODE 3904 PCS 1 V305
0780193 SMD TRIODE 2SK3018 PCS 2 V303,V304
0780115 SMD TRIODE 2SB1132 PCS 2 V301,V302
0880185 IC NJM4558M SOP PCS 1 U219
0880562 IC 4580 SOP PCS 1 U219
0880361 IC 4558 SOP PCS 1 U219
0880322 IC MM74HCU04M SOP PCS 1 U205
0880513 IC HCU04 SOP PCS 1 U205
0881275 IC IC42S16100-7T SOP PCS 2 U203,U204
0881182 IC LM1117MP-ADJ SOT-223 PCS 1 U209
0881124 IC CS4340-KS SOP PCS 1 U206
0881031 IC 24C02N SOP PCS 1 U202
0882257 IC MT1389FE/C(C VERSION) QFP PCS 1 U201
0881378 IC BA5954FP HSOP PCS 1 U302
0960020 CRYSTAL OSCILLATOR 27.00MHz 49-S PCS 1 X201
1940140 CABLE SOCKET 14P 1.0mm STRAIGHT DUAL LINE
PLUG PCS 1 XS204
1631889 PCB 2967B-3 PCS 1
1940024 SOCKET 5P 2.0mm PCS 1 XS302
1940005 SOCKET 6P 2.0mm PCS 2 XS303,XS201
1940030 SOCKET 10P 2.5mm PCS 1 XS203