dumpmaster and megadumper options - simpro.world · multi manual bin tipper features 65kg capacity...
TRANSCRIPT
201 3
51-53 Church St
Onehunga
Auckland
New Zealand
PH 0800 734 744 (NZ)
1800 25 00 59 (AU)
+64 (9) 634 7445
www.simpro.net.nz
Copyright © 2013 Simpro Handling Equipment Ltd.
Simpro Intellectual Property is protected by Patents, Registered
Designs and Trademarks in many countries worldwide.
Simpro Handling Equipment has a programme of continual
development. Specifications and features are subject to change
without notice.
Visit www.simpro.net.nz for more
information and to watch videos
of the equipment in action.
Dumpmaster and MegaDumper Options
AS/NZ STANDARDS AND CE
COMPLIANCE
The Simpro range can be specified to meet Category 3 Standards and CE regulations. This does involve extra costs on the standard range.
DOOR-END CONTROLS
The controls can be mounted at the ‘door end’ of the machine so the operator is well away from the product as it empties
STAINLESS-STEEL CONSTRUCTION
Simpro bin lifters are available either partially or completely constructed from stainless-steel.
FRAME-MOUNTED CHUTES
Are available for situations where the Dumpmaster cannot go right up against the bin or hopper being filled.
PET-G GUARDING
PET-G guarding panels are available in place of the standard wire mesh guards.
OPERATOR GUARD
Is available to protect the operator from glass or chemical splashes.
FRONT PANEL
A guard panel is available for the front of Dumpmaster and MegaDumpers.
FOOT GUARDS
Foot guard pressings are available for most Dumpmasters to prevent operators’ feet going under the machine frame.
SWING-UP LOCKING DOOR
A swing up door supported by gas struts may be fitted instead of the standard side-hinged door.
LEFT-HINGED DOOR
The door on standard machines in hinged on the right-hand side. Left-hinged doors are available if specified at the time of ordering.
BIN HOOKS
Attach to most Dumpmasters, securing the tipper to a bin or skip.
AUTO-CYCLE OPTION
Is available for mains-powered Dumpmasters to enable operators to leave the machine to complete the cycle unattended.
SCALES Platform scales can be provided to fit under the cradle to enable product to be weighed before tipping.
BIN TIPPING SOLUTIONS
MANUAL BIN TIPPER
FEATURES
65kg Capacity
1500mm Tip Height
Tips all standard wheelie bins up to 240L
Heavy duty winch operated - no motorised pinch points!
No electrical or hydraulic components to service.
Rugged powder coated frame for weather protection
Comes knocked down, minimising freight costs and emissions due to transportation
Multi-Tip®
HYDRAULIC POWERED
LIGHT INDUSTRIAL DUTY
FEATURES
150kg capacity
1200mm or 1600mm tip height
Tips all standard wheelie bins up to 240L
Custom cradles available to suit other bins and drums
Multi-Tip bin-tippers are available with 1-phase, 3-phase, or battery power packs. Battery-powered tippers have a sealed battery and an industrial-quality ‘float’ charger built in
Multi-Tip tippers are available with a solar panel to charge the battery. Empty bins with the power of the sun!
dumpmaster®
HYDRAULIC POWERED
HEAVY DUTY
FEATURES
Up to 300kg capacity
Standard tip heights from 700mm to 2.1m but can be built economically to any height
The standard cradle is designed for 240 litre MGB wheelie bins. Optional catch kits enable 80l, 120l, & 140l bins to be emptied as well
Custom cradles available to suit other bins and drums
Dumpmasters are available with 1-phase, 3-phase, or battery power packs. Battery-powered tippers have a sealed battery and an industrial-quality ‘float’ charger built in
MegaDumper®
HYDRAULIC POWERED
SUPER HEAVY DUTY
FEATURES
Up to 750kg capacity
Standard Tip Heights from 1.2m to 2.1m but can be built to suit any height
Built to suit a range of larger bins, including 660 & 1000/1100l wheelie bins, or square and rectangular bins. Attachments are available to enable multiple bin sizes to be tipped, from 80 L up to 1100L with no adjustment of the cradle
MegaDumpers are available with 1-phase, 3-phase, or battery power packs. Battery-powered tippers have a sealed battery and an industrial-quality ‘float’ charger built in
Copyright © 2013 Simpro Handling Equipment Ltd
ELIMINATE BACK STRAIN WITH A BIN TIPPING SOLUTION
THE SAFEST AND MOST VERSATILE RANGE OF BIN TIPPERS IN THE WORLD!
Ezi-
Benefits Eliminate back strain Light and easy to move Save time – empty bins fast Cost effective
Benefits Safe – Integrated locking door* Durable in the most rigorous environments Helps achieve OH&S Objectives Cost effective custom designs
*A locking door is an option on the Dumpmaster but standard on the MegaDumper.
201 3
51-53 Church St
Onehunga
Auckland
New Zealand
PH 0800 734 744 (NZ)
1800 25 00 59 (AU)
+64 (9) 634 7445
www.simpro.net.nz
Copyright © 2013 Simpro Handling Equipment Ltd.
Simpro Intellectual Property is protected by Patents, Registered
Designs and Trademarks in many countries worldwide.
Simpro Handling Equipment has a programme of continual
development. Specifications and features are subject to change
without notice.
Visit www.simpro.net.nz for more
information and to watch videos
of the equipment in action.
Dumpmaster and MegaDumper Options
AS/NZ STANDARDS AND CE
COMPLIANCE
The Simpro range can be specified to meet Category 3 Standards and CE regulations. This does involve extra costs on the standard range.
DOOR-END CONTROLS
The controls can be mounted at the ‘door end’ of the machine so the operator is well away from the product as it empties
STAINLESS-STEEL CONSTRUCTION
Simpro bin lifters are available either partially or completely constructed from stainless-steel.
FRAME-MOUNTED CHUTES
Are available for situations where the Dumpmaster cannot go right up against the bin or hopper being filled.
PET-G GUARDING
PET-G guarding panels are available in place of the standard wire mesh guards.
OPERATOR GUARD
Is available to protect the operator from glass or chemical splashes.
FRONT PANEL
A guard panel is available for the front of Dumpmaster and MegaDumpers.
FOOT GUARDS
Foot guard pressings are available for most Dumpmasters to prevent operators’ feet going under the machine frame.
SWING-UP LOCKING DOOR
A swing up door supported by gas struts may be fitted instead of the standard side-hinged door.
LEFT-HINGED DOOR
The door on standard machines in hinged on the right-hand side. Left-hinged doors are available if specified at the time of ordering.
BIN HOOKS
Attach to most Dumpmasters, securing the tipper to a bin or skip.
AUTO-CYCLE OPTION
Is available for mains-powered Dumpmasters to enable operators to leave the machine to complete the cycle unattended.
SCALES Platform scales can be provided to fit under the cradle to enable product to be weighed before tipping.
BIN TIPPING SOLUTIONS