dulux refinish commercial vehicle specification cv spec owens 021014.pdf · dulux refinish coatings...
TRANSCRIPT
Dulux Refinish Coatings Product Application Guide – Owens V1 October 2014
Dulux Refinish Commercial Vehicle Specification
Prepared for: Mr Kerry Crocker Approved by: Mr Kerry Crocker, National Operations Mgr Approval Date: October 2014 Contact No: [email protected] Prepared by: Mr Greg Lynch
Dulux Refinish Australia
Date: October 2014
Owens Paint Configuration & Specification.
Please note that all brand & colour positioning must comply with approved Owens
brand and Style guidelines. Specific technical & product data for Dulux Refinish products and ancillaries use the Technical Data Sheets (TDS) provided by Dulux Refinish Australia / New Zealand.
Dulux Refinish Coatings Product Application Guide – Owens V1 October 2014
Colour Details Follow: All topcoats mixed & used in accordance with Dulux Refinish TDS where various speeds of hardener and thinner are available depending on surface area and environmental conditions.
• Dulux® AutoSpeed® CV 2:1 2K Owens Red, 488-S7304 • Dulux® AutoSpeed® CV 2:1 2K Owens Silver, 488-S7800
Consult Owens brand and Style guidelines for: Positioning of primary, secondary colours including but not limited to Chassis, Grille and wheels colours. Hard side and Curtain Side Trailers.
Approved Colour Plates are included in this Specification
Owens Livery Guide
Main Body Colour: Owens Red Chassis: Owens Red Wheels: Alloy or Owens Silver
Dulux Refinish Coatings Product Application Guide – Owens V1 October 2014
DULUX AUTO REFINISH COATINGS SPECIFICATION Refurbishment of new OEM Cab & Chassis, existing paint in a sound condition
Project: Owens Site: Australia / New Zealand Scope: Refurbishment of new OEM cab & Chassis where the existing
paint is in a sound condition Should there be any uncertainty on the use of Dulux® Autospeed® products please contact your Dulux® Representative for further advice prior to commencing work. 1. Specification Surface Preparation: All surfaces must be cleaned with Dulux® AutoSpeed® Prepwash
(965-89784) and dry before sanding. The paint surface should be sanded with P320-400, cleaned and washed ensuring its free from oil, grease, dirt or any other existing contaminants using Dulux® AutoSpeed® Prepwash (965-89784) making sure all surfaces dry before topcoating. Alternatively, The surface could be abraded with a grey scouring pad & matting paste or clean soapy water followed by Dulux® AutoSpeed® Prepwash (965-89784) before applying Dulux® AutoSpeed® Adhesion promoter.
Adhesion promoter (if used)
Topcoat
Material: Dulux® Autospeed® Adhesion Promoter
Dulux® Autospeed® CV 2:1 2K
Product Code: 485S0015 488 line Hardener code: n/a Autospeed 2K Hardener
98089290 Thinner Code: n/a Autospeed 2K Thinner
92089292 Colour: clear Refer to Notes Application: refer to TDS refer to TDS Dry Film: (microns)
10 Min: 40 Max: 60
Theoretical Coverage M2/L: 10 m2/L at 10um
10.1 m2/L at 40um (may vary according to colour)
Dulux Refinish Coatings Product Application Guide – Owens V1 October 2014
DULUX AUTO REFINISH COATINGS SPECIFICATION
Painting of a new steel undercarriage Project: Owens Site: Australia / New Zealand Scope: Painting of a new steel undercarriage Should there be any uncertainty on the use of Dulux® Autospeed® products please contact your Dulux® Autospeed® Representative for further advice prior to commencing work. 2. Specification Surface Preparation:
All surfaces should be free from oil, grease, dirt or any other existing contaminants. All surfaces must be clean and dry before coating. Dry abrasive blast all surfaces in accordance with AS1627.4 Class 2.5. Note: All surfaces are to be coated within four hours upon abrasive blasting completion. All edges, bolts, nuts and difficult to coat areas require extra brushing-in & stripe coating to achieve adequate coating thicknesses. Grind all sharp edges min 2mm radius, remove weld spatter & other substrate defects that will affect coating performance. SURFACE PROFILE (microns) Minimum: 40 Maximum: 60
Primer coat Topcoat Material: Dulux® Autospeed® DP 42 Dulux® Autospeed® CV 2:1 2K Product Code: 488S0042 488 line Hardener code: Autospeed DP 42 Part B
980S0043 Dulux® AutoSpeed® 2K Hardener 98089290
Thinner Code: Autospeed 2K Thinner 92089292
Dulux® AutoSpeed® 2K Thinner 92089292
Colour: Grey various Application: refer to TDS refer to TDS Dry Film: (microns)
Min: 50 Max: 80
Min: 40 Max: 60
Theoretical Coverage m2/L:
9.6 m2/L at 50um
10.1 m2/L at 40um (may vary according to colour)
Dulux Refinish Coatings Product Application Guide – Owens V1 October 2014
DULUX AUTO REFINISH COATINGS SPECIFICATION Refurbishment of OEM Cab & Chassis, existing paint in a poor condition
Project: Owens Site: Australia / New Zealand Scope: Refurbishment of new OEM cab & Chassis where the existing
paint is in an unstable or poor condition. For example, greater than 250 microns in film build, Chipped, cracked, flaking, faded or otherwise not to OEM or industry std.
Should there be any uncertainty on the use of Dulux® Autospeed® products please contact your Dulux® Representative for further advice prior to commencing work. 3. Specification Surface Preparation: Cab: Chassis:
All surfaces must be cleaned with Dulux® AutoSpeed® Prepwash (965-89784) and dry before work is commenced. Remove all unstable coating(s) by power tool or alternative method depending on substrate ie GRP or Ferrous non ferrous metals. Identify and repair all areas to industry std, followed by appropriate 2K primers as per TDS. Remove all unstable coating(s) by media garnet grade C blast to AS1627.4, SA2.5 followed by Dulux Autospeed 488S0042 DP 42 Epoxy Primer within 4 hours.
Primer Cab (Steel)
Primer Chassis & non ferrous Cab
Topcoat Cab & Chassis
Material:
Dulux® Autospeed® HS Primer
Dulux® Autospeed® DP 42 Epoxy Primer
Dulux® Autospeed® CV 2:1 2K
Product Code: 48889287
488S0042 488 line
Hardener code: 2K 4:1 Hardener 98089291
DP 42 Epoxy Primer Pt B 980S0043
Autospeed 2K Hardener 98089290
Thinner Code: Autospeed 2K Thinner 92089292
Autospeed 2K Thinner 92089292
Autospeed 2K Thinner 92089292
Colour: Grey Grey Refer to Notes Application: refer to TDS refer to TDS refer to TDS Dry Film: (microns)
Min: 40 Max: 60
Min: 50 Max: 80
Min: 40 Max: 60
Theoretical Coverage M2/L:
10.6 m2/L at 40um 9.6 m2/L at 50um
10.1 m2/L at 40um (may vary according to colour)
Dulux Refinish Coatings Product Application Guide – Owens V1 October 2014
4. Notes
Applicator to ensure that all colours supplied match the approved standard prior to commencement. Positioning of colours for livery to be confirmed with the client prior to commencement. The use of other thinner than nominated herein will impair the performance of the coating and system. This specification must be read in conjunction with the technical data sheets for each product.
Dulux® AutoSpeed® CV 2:1 2K Owens Red, 488-S7304
Dulux® AutoSpeed® CV 2:1 2K Owens Silver, 488-S7800 5. Equipment Requirements
Personal Protective Equipment (PPE): Nitrile / latex gloves, air feed breathing apparatus, Approved spray suit, safety shoes/boots, safety glasses and hearing protection. Professional spray gun Suitable controlled & approved spraying environment 4. Safe Handling Please refer to the relevant Material Safety and Product Data Sheets before using any of the recommended products. In the event of an emergency contact: 1 800 033 111 (ALL HOURS) 5. For further information contact:
All refinish work to be carried out by an authorised Dulux Refinish Heavy Transport
repairer, for specific repairer locations contact: Grant Macfarlane Perfect Match Paints [email protected] 021 800 522 Graham Lockie Dulux Australia Dulux Auto Refinish 1956 Dandenong Rd QLD & NZ Clayton, Victoria, 3168 Ph: 00614 0296 8617 Australia E: [email protected] ABN 42 133 404 065
Dulux Refinish Coatings Product Application Guide – Owens V1 October 2014
Owens Approved Colour Standard
Dulux® AutoSpeed® CV 2:1 2K Owens Red, 488-S7304 Signed:_____________________________________________________________ DISCLAIMER: Any advice, recommendation, information, assistance or service provided by Dulux Refinish Coatings in relation to goods manufactured by it or their use and application is given in good faith and is believed by Dulux Refinish Coatings to be appropriate and reliable. However, any advice, recommendation, information, assistance or service provided by Dulux Refinish Coatings provided without liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right entitlements and remedies conferred upon any person or the liabilities imposed upon Dulux Refinish Coatings by any condition or warranty implied by applicable legislation, regulation or other Government ordinance voiding or prohibiting such exclusion, limitation or modification