ducted hepa filter
DESCRIPTION
Ducted HEPA FilterTRANSCRIPT
Ducted HEPA filter units
Content overview
Leaflet F3 / 2 / 2 / EN
Duct casing for installation into ductworkFitting of filter elements for the separation of suspended particles
»»
..................................................................
.................................................................. 23
General informationTechnical data ∙ Specification text
Ducted HEPA filter units - Leaflet F3/2/2/EN2
General information
Ducted HEPA filter unit
Detail
Suitable filterelements
»
»
»
»
»
»
»
Type F353
Turnbuckles for secure sealing between ca sing and filter element.Cover plate with profiled gasket and fourclamping screws with star grips.Pressure measuring points for each filter unit are part of the supply package but mustbe set up on site by others.
Type F780 (E11), Type F781 (H13), Type F782 (H14).Construction: Frame made of MDF, galvanisedsheet steel, or stainless sheet steel.
Type F770 (E11), Type F771 (H13).Construction: Frame made of MDF, galvanised sheet steel, or stainless sheet steel.
Duct casing for installation into ductwork. Fit ting of filter elements for the separation ofsu spended particles such as aerosols, toxicdusts, viruses, and bacteria from the supply or extract air.
Duct casing made of sheet steel with decon taminable powder coating RAL 9010.
Type F352
Duct casing with rigid connecting flanges.
High-efficiency filters for the most critical re quirements of air purity and sterility.
Main or final filter for the most critical re quirements of air purity and sterility.
Upon request.
Application
Material
Construction
Equipment
Minipleat filter cells or minipleat filter pa nels as HEPA filters (F7/7/../.. and F7/9/../..)
HEPA filter cells (F7/12/../..)
Other filter elements
»
»
»
»
With sealing integrity test facility for HEPA fil ter elements.
Associated filters must be ordered separately.
»
»
»»
Construction
Associated TROX filter elements
»
»
T 30
H
B
3Ducted HEPA filter units - Leaflet F3/2/2/EN
Technical data ∙ Specification text
Ducted HEPA filter units F352, F353:»»
»
»
»
Technical data:Nominal volume flow rate ____________l/s (m3/h)Dimensions of ducted HEPA filter unit ________________mmNet weight ____________________________kgOrder no. _______________________________Make: TROX
Duct casing for installation into ductworkFitting of filter elements for the separation of su spended particlesDuct casing made of sheet steel with deconta minable powder coating RAL 9010Turnbuckles for secure sealing between casing and filter elementCover plate with profiled gasket and four clam ping screws with star grips
Dimensions of ducted HEPA filter unit F352
Dimensions of ducted HEPA filter unit F353
Table 1: Technical data for F352
Table 2: Technical data for F353
1) HEPA filter elements H13 with various nominal volume flow rates depending on construction.
1) HEPA filter elements H13 with various nominal volume flow rates depending on construction.
Technical data
Filter casing withperipheral connectingflanges, width 42.5 mm.
Individual units to beinstalled either asshown or after a 90°rotation.
Specification text
All weights are net,without packaging.
Detail drawing 1: Ducted HEPA filter unit
HEPA filter elements H13, the lowest and highest volume flow rates are shown.
≈ kg
≈ kg
Weight
Weight
B H T
B H T
F352A01F352B01F352C01F352D01F352E01
F353A01F353B01F353C01F353D01F353E01
1619192427
1821212830
Order no.
Order no.
Nominal volume flow rate 1)
Nominal volume flow rate 1)
Dimensions of unit mm
Dimensions of unit mm
l/s m3/h
l/s m3/h
Filter size mm
Filter size mm
305 305 150305 610 150305 610 150610 610 150762 610 150
305 305 292305 610 292305 610 292610 610 292762 610 292
130 460270 980270 980585 2100740 2660
150 545325/470 1165/1700325/470 1165/1700695/945 2500/3400
880/1180 3160/4250
B H T
B H T
405 378 405405 378 710710 378 405710 378 710710 378 862
405 520 405405 520 710710 520 405710 520 710710 520 862
Filters Subject to change / All rights reserved © TROX GmbH 04/2011