dual-shear m45 shredder m45 shredder ssi’s dual-shear … · m45 shredder . ssi’s dual-shear ®...
TRANSCRIPT
9760 SW Freeman Dr. • Wilsonville, OR 97070 USA(503) 682.3633 • [email protected]
PD-0M35
DUAL-SHEAR® M45 SHREDDER SSI’s Dual-Shear® M45 is a low-speed, high-torque, two-shaft, rotary shear shredder designed to efficiently process a variety of difficult materials.
SSI ADVANTAGES
HIGH-TORQUE, LOW-SPEED DESIGNDelivers multipurpose shredding with greater on-line reliability and lower maintenance requirements than other technologies.
AUTO REVERSAL FEATUREProtects against overfeeding and damage by non-shreddables.
PROPRIETARY BEARING PROTECTIONIsolates bearings from cutting chamber contamination and protects against bearing failure.
DIRECT DRIVE MOTORProvides improved efficiency and reliability. Alternate speed and torque combinations available.
M45 DUAL-SHEAR® SHREDDERS PROCESS MATERIALS INCLUDING: ▪ Mixed Waste
▪ Wood
▪ Plastics
▪ Medical Waste
▪ Paper / Cardboard
▪ Document Destruction
▪ Pharmaceuticals
▪ Product Destruction
▪ Organic Waste
▪ Glass
▪ Light Electronic Scrap
▪ Light Gauge Metals
▪ and more...
M45 DUAL-SHEAR® SHREDDER FEATURES: ▪ Proprietary bearing & seal
arrangements at shredder gearbox and endplate
▪ CNC machined shredder frame, torsion box design, modular construction
▪ Small footprint
▪ Low power requirements
▪ “Floating” cleaning fingers inside shredder minimize the possibility for material buildup.
SSI Shredding Systems 9760 SW Freeman Dr. • Wilsonville, OR 97070 USAph: +1 (503) 682-3633 • fax: +1 (503) 682-1704
email: [email protected]
PD-0M35
SSI ADVANTAGES
HIGH-ToRqUE, Low-SpEED DESIGNDelivers multipurpose shredding with greater on-line reliability and lower maintenance requirements than other technologies.
AUTo REVERSAL FEATUREProtects against overfeeding and damage by non-shreddables.
pRopRIETARy bEARING pRoTEcTIoNIsolates bearings from cutting chamber contamination and protects against bearing failure.
DIREcT DRIVE MoToRProvides improved efficiency and reliability. Alternate speed and torque combinations available.
DUAL-SHEAR® M45 SHREDDER SSI’s Dual-Shear® M45 is a low-speed, high-torque, two-shaft, rotary shear shredder designed to efficiently process a variety of difficult materials.
M45 DUAL-SHEAR® SHREDDERSpRocESS MATERIALS INcLUDING:▪ Mixed Waste
▪ Wood
▪ Plastics
▪ Medical Waste
▪ Paper / Cardboard
▪ Document Destruction
▪ Pharmaceuticals
▪ Product Destruction
▪ Organic Waste
▪ Glass
▪ Light Electronic Scrap
▪ Light Gauge Metals
▪ and more...
M45 DUAL-SHEAR® SHREDDER FEATURES:▪ Proprietary bearing & seal
arrangements at shreddergearbox and endplate
▪ CNC machined shredderframe, torsion box design,modular construction
▪ Small footprint
▪ Low power requirements
▪ “Floating” cleaning fingersinside shredder minimizethe possibility for materialbuildup.
9760 SW Freeman Dr. • Wilsonville, OR 97070 USA(503) 682.3633 • [email protected]
Note: Illustrations, specifications and descriptions presented reflect standard product at time of publication and are subject to change without notice. Dimensions are approximate. Photographs may include optional equipment and accessories. SSI offers compactors, balers, granulators, conveyors and classifiers as well as specialized motors, stands, hoppers, and mobile configurations. Consult factory to discuss your processing needs.
SSI offers a full range of energy-efficient electric and hydraulic shredders as well as custom units to meet all processing requirements.
STANDARD CUTTING CHAMBER (W X L): 19 IN X 19 IN (483 MM X 483 MM)Optional lengths available: N/A
STANDARD CUTTER PROFILES
SHREDDER MODEL NO. M45EDrive Electric
Number of Electric Motors One
Power 10 HP (7.5 kW)
Voltage 460/3/60 or 350/3/50
Shock Load Protection Amperage overload reversals
Cutter Thickness (nominal) 1 in (25 mm)
Cutter Diameter 9.8 in (248 mm)
Cutting Chamber (WxL)* 19 in x 19 in (483 mm x 483 mm)
Machine Length (C)* 71 in (1,816 mm)
Machine Width (D) 29 in (746 mm)
Machine Height (E) 72 in (1,838 mm)
Machine Weight 2,061 lbs (930 kg)
Stand Height (I) 39.5 in (1,003 mm)
Electrical controls including motor starters, PLC, and operator interface are supplied in NEMA 4 enclosures.
SSI Shredding Systems 9760 SW Freeman Dr. • Wilsonville, OR 97070 USAph: +1 (503) 682-3633 • fax: +1 (503) 682-1704
email: [email protected]
Note: Illustrations, specifications and descriptions presented reflect standard product at time of publication and are subject to change without notice. Dimensions are approximate. Photographs may include optional equipment and accessories. SSI offers compactors, balers, granulators, conveyors and classifiers as well as specialized motors, stands, hoppers, and mobile configurations. Consult factory to discuss your processing needs.
SSI offers a full range of energy-efficient electric and hydraulic shredders as well as custom units to meet all processing requirements.
Standard Cutting Chamber (W x L): 485 mm x 485 mm (19 in x 19 in)Optional lengths available: N/A
STANDARD cUTTER pRoFILES
SHREDDER MoDEL No. M45EDrive Electric
Number of Electric Motors One
Power 7.5 kW (10 HP)
Voltage 460/3/60
Voltage Options Many - Consult Factory
Shock Load Protection Amperage overload reversals
Cutter Thickness (nominal) 25 mm (1 in)
Cutter Diameter 254 mm (10 in)
Shaft Diameter 70 mm (2.8 in)
Cutting Chamber (WxL)* 485 mm x 485 mm (19 in x 19 in)
Machine Length (C)* 1,615 mm (64 in)
Machine Width (D) 745 mm (29 in)
Machine Height (E) 2,223 mm (87.5 in)
Machine Weight 800 kg (1,700 lbs)
Hopper Opening (FxG)* 660 mm x 660 mm (26 in x 26 in)
Hopper Height (H) 483 mm (19 in)
Stand Height (I) 1,219 mm (48 in)
Electrical controls including motor starters, PLC, and operator interface are supplied in NEMA 4 enclosures.
C
C
E
GFD
H
I
D
C
C
E
GFD
H
I
D
C
C
E
GFD
H
I
D