dual-safe valves - habonim.com · nace mr0103/iso 17945:2015 metallic materials resistant to...
TRANSCRIPT
Dual-safe valves
Inspired By Challenge
1
2
Floating Ball Valves
Dual-Safe (DB&B) valve
IntroductionThe Habonim Dual-Safe valve series presents an optimal design solution and guarantees isolation on critical applications and service when an emergency shut-down (ESD) valve is a necessity.The Dual-Safe unit incorporates two main isolation valves and one bleed valve in a single body construction. This special construction offers the lowest possible number of potential leakage points from a process connection and reduces the overall valve envelope size and weight by integrating valves, piping, and fittings into one compact design. Technical summarySize range 1/4" - 8" (DN8 - DN200)Design Single Body Construction (SBC) with reduced number of body sealsPressure range ANSI Class 150 to 2500Temperature range -200 °C to +260 °C ( -328 °F to 500 °F)Materials Carbon Steel, Stainless Steel ,Alloy C22, Duplex, Super Duplex, 254SMO and moreEnd connections Threaded, welded, flanged and more
Operation Manual, actuated and coupled actuation
Standards of complianceFactory certification ISO 9001:2015 Quality management systemValve design & tests ASME B16.34 :2013,ISO17292 :2004
API 6D / ISO14313 :2007Valve design
ASME B16.5:2017, EN 1092 -1:1997 Flange dimensionsASME B16.10:2017, EN 558:2017 Face-to-Face dimensionsNACE MR-0175:2015/ISO 15156 -1:2015 Materials for use in H2S-containing environments in oil and gas
productionNACE MR0103/ISO 17945:2015 Metallic materials resistant to sulfide stress cracking in corrosive
petroleum refining environmentsEN 12266-1:2012, API 598:2016 Testing of metallic valves - Pressure tests, test procedures and
acceptance criteriaAPI 607:2016, ISO 10497:2010 Testing of valves - fire type-testing requirementsISO 15848-1:2015 Industrial valves - measurement, test and qualification procedures
for fugitive emissionsCertifications PED 2014/68/EU Module H Pressure equipment directive
ATEX 2014/34/EU Equipment and protective systems intended for use in potentially explosive atmospheres (optional for actuated unit only)
IEC 61508-2/3:2010 SIL2/3 Safety integrity level - functional safety of electrical/electronic/programmable electronic safety-related systems (optional for actuated unit only)
Documentation EN 10204:2004 2.2/3.1/3.2 Metallic materials - types of inspection documents
Dual-Safe (DB&B) valve General DB&B Ordering code system
3
Dual-Safe (DB&B) valve
Dual-Safe (DB&B) valve
47X/47W Standard and full port
Size range 1/4"-2" (DN8-DN50)
Pressure range ANSI Class 900
Size range 21/2" (DN65)
Pressure range ANSI Class 600
End connections Threaded, welded, flanged
73X/73W Full port
Size range 11/2"-8" (DN32-DN200)
Pressure range ANSI Class 150
End connections Flanged ANSI
74X/74W Full port
Size range 11/2"-8" (DN32-DN200)
Pressure range ANSI Class 300
End connections Flanged ANSI
78X/78W Full port
Size range 11/2"-2" (DN32-DN50)
Pressure range DIN PN40
End connections Flanged DIN
77X/77W Full port
Size range 3"-8" (DN80-DN200)
Pressure range DIN PN16
End connections Flanged DIN
28X/28W Standard and full port
Size range 1/4"-11/4" (DN8-DN32)
Pressure range ANSI Class 2500
End connections Threaded, welded, flanged
C47C/C47W Standard and full port
Size range 1/4"-8" (DN8-DN200)
Pressure range ANSI Class 600
End connections Threaded, welded, flanged
C73C/C73W Full port
Size range 11/2"-8" (DN40-DN200)
Pressure range ANSI Class 150
End connections Flanged ANSI
C74C/C74W Full port
Size range 11/2"-8" (DN40-DN200)
Pressure range ANSI Class 300
End connections Flanged ANSI
C78C/C78W Full port
Size range 11/2"-2" (DN40-DN50)
Pressure range DIN PN40
End connections Flanged DIN
C77C/C77W Full port
Size range 3"-8" (DN80-DN200)
Pressure range DIN PN16
End connections Flanged DIN
C28C/C28W Standard and full port
Size range 1/4"-11/4" (DN8-DN32)
Pressure range ANSI Class 2500
End connections Threaded, welded, flanged
Cryogenic series
For temperature 260° C (500° F) and above, please consult with Habonim engineering team for metal seated valve solution.
Series in rangeStandard series
4
Floating Ball Valves
Dual-Safe (DB&B) valve
How Dual-Safe Works
The two main isolation valves are operated by one actuator with a coupled mechanical link system that ensures they rotate together. The bleed valve is actuated separately. This unit presents a simple concept that will assure zero flow to the furnace and maximum operational safety.
Standard OperationIn a standard application, the primary line valves are set to the "fail to close" position, and the bleed valve is set to the "fail to open" position. During normal operation, the primary line valves are open; the bleed valve is closed, and gas flows to the furnace.
Open
Close
Open
Close
Open
Close
Dual-Safe (DB&B) valve General DB&B Ordering code system
Prevention of explosions in fuel, oil and natural gas furnacesFurnace explosions are caused by the ignition of an accumulated combustible mixture within the boiler furnace enclosure.• An interruption of the fuel or air supply or ignition energy to the burners, sufficient to result in momentary loss of flames,
followed by restoration and delayed reigniting of an accumulation• Repeated unsuccessful attempts to light off without appropriate purging can result in an accumulation of an explosive
mixture• Fuel leakage into an idle furnace and the ignition of the accumulation by a spark or other source of ignition
Explosions, including "furnace puffs", are the result of improper equipment design, improper procedures by operating personnel or control system malfunctions.
5
Dual-Safe (DB&B) valve
Dual-Safe (DB&B) valve
General
Shutting downWhen shutting down the system, the isolation valves are closed, while the bleed valve is switched to its open position. A pipeline connected to the bleed valve releases the trapped pressure between the two isolation valves out into the atmosphere. Any trace of leakage detected between the isolation valves triggers a sensor on the bleed line and sets off an alarm in the control room.
Dual-Safe Advantage• Minimizes the risk of furnace explosion.• Increases system reliability.• Saves space and reduces weight.• Reduces installation time.• Streamlines maintenance operations.• Reduces number of items in repair kits.• Rugged construction.• Bubble tight shutoff on all three valves.• Coupled operating mechanism reduces the number of actuators on the main line• Tongue and groove design for all body seals Variety of end connections (welded, threaded, flanged)
Dual-Safe basic version manually operated suitable mainly for sampling system and instrumentation.
A complete in-house package solution that includes: valves, actuators, and accessories, Assembled, calibrated, and factory tested. tested.
Optional configurations
78 4
910
1112
13
14
17
2
6
19
35
4
1
5
14
17
131211
1010A
7a98
1615
53
56
2
19
7a
16
18
18
7
K
H2 H3
151 ø11.15
K1-ANSI
RF
w
B
F2
F1
TxL
A1 - ANSI RF A - THD, BW, SW
D C
øBall port
48
12.7 12.7
M6 TYPx2
S S1
H
H1
L
(1) For full port valve use one size up for all dimensions except of A1 and K1 (ask Habonim team to provide).(2) #600 and #900 flanges are available (for 21/2" only #600) as well as DIN EN 1092 flanges.The product weight is not specified in this section due to the verity of end configurations.
6
Floating Ball Valves
Dual-Safe (DB&B) valve
Std. port Unit Ball
Port(1) A1- RF(2)
A B C D H H1 H2 H3 KK1(2)
L S S1 W N P F F1 F2 TxLKv
150 300 150 300 Cv
DN15 mm 11.15 162.20 194.20 121.00 75.00 23.50 37.80 91.00 47.00 62.00 92.00 52.00 71.00 87.00 54.40 114.50 152.50 54.003/8 UNF
7.20 - - 34.00 -M5X10
7
1/2" inch 0.44 6.39 7.65 4.76 2.95 0.93 1.49 3.58 1.85 2.44 3.62 2.05 2.80 3.43 2.14 4.51 6.00 2.13 0.28 - - 1.34 - 8
DN20 mm 14.30 182.80 217.80 152.00 90.00 27.00 40.30 93.00 49.00 62.00 92.00 54.00 75.00 91.00 65.50 114.50 152.50 54.003/8 UNF
7.20 - - 34.00 15.00M5X10
10
3/4" inch 0.56 7.20 8.57 5.98 3.54 1.06 1.59 3.66 1.93 2.44 3.62 2.13 2.95 3.58 2.58 4.51 6.00 2.13 0.28 - - 1.34 0.59 12
DN25 mm 20.65 203.10 241.30 174.90 107.90 38.00 55.60 106.00 62.00 62.00 92.00 64.00 89.00 105.00 76.00 146.00 163.00 60.007/16 UNF
7.20 - - 42.00 24.00M5X10
27
1" inch 0.81 8.00 9.50 6.89 4.25 1.50 2.19 4.17 2.44 2.44 3.62 2.52 3.50 4.13 2.99 5.75 6.42 2.36 0.28 - - 1.65 0.94 32
DN32 mm 25.50 276.70 276.70 206.90 139.90 42.65 60.20 109.50 90.50 88.00 118.00 65.00 87.00 103.00 98.70 146.00 163.00 91.007/16 UNF
7.20 (F04) 42.00 - -M5X10
37
11/4" inch 1.00 10.89 10.89 8.15 5.51 1.68 2.37 4.31 3.56 3.46 4.65 2.56 3.43 4.06 3.89 5.75 6.42 3.58 0.28 1.65 - - 43
DN40 mm 31.80 246.40 271.20 201.20 129.60 43.55 73.00 121.50 99.60 88.00 118.00 66.00 88.00 104.00 81.24 180.00 259.00 99.009/16 UNF
8.00 (F05) 50.00 - -M6X12
70
11/2" inch 1.25 9.70 10.68 7.92 5.10 1.71 2.87 4.78 3.92 3.46 4.65 2.60 3.46 4.09 3.20 7.09 10.20 3.90 0.32 1.97 - - 82
DN50 mm 38.15 266.60 304.60 230.40 145.00 48.25 77.80 125.00 103.00 88.00 118.00 69.00 91.00 107.00 88.70 180.00 259.00 92.009/16 UNF
8.50 (F05) 50.00 - -M6X12
103
2" inch 1.50 10.50 11.99 9.07 5.71 1.90 3.06 4.92 4.06 3.46 4.65 2.72 3.58 4.21 3.49 7.09 10.20 3.62 0.33 1.97 - - 120
DN65 mm 51.05 383.60 383.60 300.80 215.00 70.00 88.10 138.00 116.00 88.00 118.00 88.00 114.00 130.00 142.40 180.00 259.00 70.009/16 UNF
13.50 (F07) 70.00 - -M8X12
219
21/2" inch 2.01 15.10 15.10 11.84 8.46 2.76 3.47 5.43 4.57 3.46 4.65 3.46 4.49 5.12 5.61 7.09 10.20 2.76 0.53 2.76 - - 256
Size 1/2”- 2” | DN15-DN50 | Class 900 | 47W DS05 SeriesSize 21/2” | DN65 | Class 600 | 47W DS05 Series
Dual-Safe (DB&B) valve General DB&B Ordering code system
Valve dimensions
Threaded, BW, SW, flanged connections are available for bleed.Default size - 1/2" (DN15)
78 4
910
1112
13
14
17
2
6
19
35
4
1
5
14
17
131211
1010A
7a98
1615
53
56
2
19
7a
16
18
18
7
K
H2 H3
151 ø11.15
K1-ANSI
RF
w
B
F2
F1
TxL
A1 - ANSI RF A - THD, BW, SW
D C
øBall port
48
12.7 12.7
M6 TYPx2
S S1
H
H1
L
7
Dual-Safe (DB&B) valve
Dual-Safe (DB&B) valve
Item Description Material specifications Qty.
11 Disc spring A693 631 17-7PH 612 Stem nut DIN 3506 A4-80, A194 Gr 8M 313 Locking clip A164 8, 8A 314 Handle C.St. A29 G10200 Zinc plated, A240 430 315 Serrated washer A194 6 216 Handle nut A194 Gr 8M, DIN 3506 A4-80 317 Sleeve PVC 3
18 Body bolt EN 3506-1 A2-70 / A4-80, A193 Gr B7 Zinc plated, A193 Gr B8M
12
19 Body nut EN 3506-2 A4, A194 Gr 2H Zinc plated, A194 Gr 8M
12
20 Anti static spring A313 302 321 Anti static plunger A479 304 323 Tag (not shown) A167 304 1
Item Description Material specifications Qty.
1 Body S.St A479 316/316L, C.St A350 LF2 1
2 Ends A351 CF3M,A351 CF8M, A216 WCB, A105, S.St A479 316/316L, C.St A350 LF2
3
3 Ball A351 CF8M, S.St A479 316/316L 34 Stem A276 316, A564 Gr.630 H1150D 17-4PH 3
5*Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM,
UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F)
6
6* Body seal PTFE, RPTFE, TFM, UHMWPE, Graphite 37* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM, CF PTFE 37a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM, CF PTFE 38 Stop pin A582 303 39* Stem seal CF PTFE, TFM, Graphite 310 Follower B783 316L 310A Slide bearing TF316 3
Size 1/2”- 2” | DN15-DN50 | Class 900 | 47W DS05 SeriesSize 21/2” | DN65 | Class 600 | 47W DS05 Series
Components & materials
6
18
2
5
7
1
4
14
17
13121110
10A7a
98
1615
53
6
18
2
27
K
E1
K1
108.3 ø11
W
B øF
TxL
F1
F2
S
H
øBall port C
D H1
S1
A1 - ANSI RFA - THD, BW, SW
L
8
Floating Ball Valves
Dual-Safe (DB&B) valve
Std. port Unit Ball
Port(1) A1- RF(2)
A B C D E1 H H1 KK1(2)
L S S1 W N P F F1 F2 TxLKv
150 300 150 300 Cv
DN15 mm 11.15 162.20 194.20 120.20 75.00 23.50 37.80 5.00 60.00 90.00 52.00 71.00 87.00 54.40 115.00 153.00 54.003/8 UNF
7.20 - - 34.00 -M5X10
7
1/2" inch 0.44 6.39 7.65 4.73 2.95 0.93 1.49 0.20 2.36 3.54 2.05 2.80 3.43 2.14 4.53 6.02 2.13 0.28 - - 1.34 - 8
DN20 mm 14.30 182.80 217.80 136.00 90.00 27.00 40.30 7.00 61.00 91.00 53.00 74.00 90.00 65.40 115.00 153.00 54.003/8 UNF
7.20 - - 34.00 15.00M5X10
10
3/4" inch 0.56 7.20 8.57 5.35 3.54 1.06 1.59 0.28 2.40 3.58 2.09 2.91 3.54 2.57 4.53 6.02 2.13 0.28 - - 1.34 - 12
DN25 mm 20.65 203.20 241.20 170.00 108.00 38.00 55.60 10.00 81.00 103.00 64.00 85.00 101.00 76.30 146.00 164.00 60.007/16 UNF
7.20 - - 42.00 24.00M5X10
27
1" inch 0.81 8.00 9.50 6.69 4.25 1.50 2.19 0.39 3.19 4.06 2.52 3.35 3.98 3.00 5.75 6.46 2.36 0.28 - - 1.65 - 32
DN32 mm 25.50 236.50 274.50 206.90 139.90 42.65 60.20 20.00 86.00 108.00 65.00 86.00 102.00 98.70 146.00 164.00 91.007/16 UNF
7.20 (F04) 42.00 - -M5X10
37
11/4" inch 1.00 9.31 10.81 8.15 5.51 1.68 2.37 0.79 3.39 4.25 2.56 3.39 4.02 3.89 5.75 6.46 3.58 0.28 1.65 - - 43
DN40 mm 31.80 246.40 271.20 196.60 129.60 43.55 73.00 20.00 98.00 120.00 67.00 88.00 104.00 81.30 263.00 219.00 99.009/16 UNF
8.00 (F05) 50.00 - -M6X12
70
11/2" inch 1.25 9.70 10.68 7.74 5.10 1.71 2.87 0.79 3.86 4.72 2.64 3.46 4.09 3.20 10.35 8.62 3.90 0.32 1.97 - - 82
DN50 mm 38.15 271.60 309.60 220.00 150.00 48.25 77.80 30.00 103.00 125.00 71.00 92.00 108.00 93.70 263.00 219.00 92.009/16 UNF
8.50 (F05) 50.00 - -M6X12
103
2" inch 1.50 10.69 12.19 8.66 5.91 1.90 3.06 1.18 4.06 4.92 2.80 3.62 4.25 3.69 10.35 8.62 3.62 0.33 1.97 - - 120
DN65 mm 51.05 338.60 338.40 255.40 170.00 70.00 88.10 42.00 113.00 135.00 60.00 82.00 98.00 97.40 263.00 219.00 70.009/16 UNF
13.50 (F07) 70.00 - -M8X12
219
21/2" inch 2.01 13.33 13.32 10.06 6.69 2.76 3.47 1.65 4.45 5.31 2.36 3.23 3.86 3.83 10.35 8.62 2.76 0.53 2.76 - - 256
Size 1/2”- 2” | DN15-DN50 | Class 900 | 47W DSN05 SeriesSize 21/2” | DN65 | Class 600 | 47W DSN05 Series
Dual-Safe (DB&B) valve General DB&B Ordering code system
Valve dimensions
(1) For full port valve use one size up for all dimensions except of A1 and K1 (ask Habonim team to provide).(2) #600 and #900 flanges are available (for 21/2" only #600) as well as DIN EN1092 flanges.The product weight is not specified in this section due to the verity of end configurations.
Threaded, BW, SW, flanged connections are available for bleed.Default size - 1/2" (DN15) up to 2" (DN50) size
6
18
2
5
7
1
4
14
17
13121110
10A7a
98
1615
53
6
18
2
27
K
E1
K1
108.3 ø11
W
B øF
TxL
F1
F2
S
H
øBall port C
D H1
S1
A1 - ANSI RFA - THD, BW, SW
L
9
Dual-Safe (DB&B) valve
Dual-Safe (DB&B) valve
Item Description Material specifications Qty.
11 Disc spring A693 631 17-7PH 412 Stem nut DIN 3506 A4-80, A194 Gr 8M 213 Locking clip A164 8, 8A 214 Handle C.St. A29 G10200 Zinc plated, A240 430 215 Serrated washer A194 6 216 Handle nut A194 Gr 8M, DIN 3506 A4-80 217 Sleeve PVC 2
18 Body bolt EN 3506-1 A2-70 / A4-80, A193 Gr B7 Zinc plated, A193 Gr B8M
12
20 Anti static spring A313 302 221 Anti static plunger A479 304 223 Tag (not shown) A167 304 1
27 Needle valve 1/2" NPT
S.St 316 1
Item Description Material specifications Qty.
1 Body S.St A479 316/316L, C.St A350 LF2 1
2 Ends A351 CF3M,A351 CF8M, A216 WCB, A105, S.St A479 316/316L, C.St A350 LF2
3
3 Ball A351 CF8M, S.St A479 316/316L 34 Stem A276 316, A564 Gr.630 H1150D 17-4PH 2
5*Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM,
UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F)
6
6* Body seal PTFE, RPTFE, TFM, UHMWPE, Graphite 37* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM, CF PTFE 27a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM, CF PTFE 28 Stop pin A582 303 29* Stem seal CF PTFE, TFM, Graphite 210 Follower B783 316L 210A Slide bearing TF316 2
Size 1/2”- 2” | DN15-DN50 | Class 900 | 47W DSN05 SeriesSize 21/2” | DN65 | Class 600 | 47W DSN05 Series
Components & materials
4
76
53
5
1
18
2
653
16
17
14
1110
10A7a
98
4 7
8
9
7a
10A
10
11
12
13
16
15
14
17
1213
18A19
18
2A
1
S
H
C D
øBall port 1
M5 TYPx4ø36 P.C.D
L S
K
151
K1
92 62
ø11.15
29 39
øw
TxL threadF P.C.D
A B
10
Floating Ball Valves
Dual-Safe (DB&B) valve
Std. port Unit Ball
Port A
B C D H KK1
L S W N P F TxLWeight
kg/ib Kv
150 300 150 300 150 300 CvDN40 mm 38.10 295.00 310.00 90.00 48.30 77.80 124.00 130.00 151.00 167.00 159.00 220.00 127.00 9/16"-18
UNF-2A19.60 (F05) 50.00
M8X1213 16 214
11/2" inch 1.50 11.61 12.52 3.54 1.90 3.06 4.88 5.12 5.94 6.57 6.26 8.66 5.00 0.77 1.97 28.6 35.3 250
DN50 mm 50.80 300.00 318.00 90.00 70.00 88.00 134.00 140.00 161.00 177.00 163.00 220.00 152.00 9/16"-18 UNF-2A
19.60 (F07)70.00M8X12
20 22 410
2" inch 2.00 11.81 12.20 3.54 2.76 3.46 5.28 5.51 6.34 6.97 6.42 8.66 5.98 0.77 2.76 44 48.5 480
Size 11/2”- 2” | DN40-DN50 | Class 150 / 300 | 73W/74W DS05 Series
Dual-Safe (DB&B) valve General DB&B Ordering code system
Valve dimensions
Threaded, BW, SW, flanged connections are available for bleed.Default size - 1/2" (DN15)
4
76
53
5
1
18
2
653
16
17
14
1110
10A7a
98
4 7
8
9
7a
10A
10
11
12
13
16
15
14
17
1213
18A19
18
2A
1
S
H
C D
øBall port 1
M5 TYPx4ø36 P.C.D
L S
K
151
K1
92 62
ø11.15
29 39
øw
TxL threadF P.C.D
A B
11
Dual-Safe (DB&B) valve
Dual-Safe (DB&B) valve
Item Description Material specifications Qty.
10A* Slide bearing TF316 311 Disc spring A693 631 17-7PH 612 Stem nut DIN 3506 A4-80, A194 Gr 8M 313 Tab lock washer A240 304 314 Handle C.St. A29 G10200 Zinc plated, A240 430 315 Serrateg washer A194 6 216 Handle nut A194 Gr 8M, DIN 3506 A4-80 317 Sleeve PVC 3
18 Body boltsEN 3506-1 A2-70 / A4-80, A193 Gr B7 Zinc plated, A193 Gr B8M
8
18A Body studs EN 3506-1 A2-70 / A4-80, A193 Gr B7 Zinc plated, A193 Gr B8M
8
19 Body nuts EN 3506-2 A4-80, A193 Gr B8M 820 Anti static spring A313 302 321 Anti static plunger A479 304 323 Tag (not shown) A167 304 1
Item Description Material specifications Qty.
1 Body A351 CF8M, A216 WCB 3
2 Ends A351 CF8M, A216 WCB, S.St A479 316/316L, C.St A350 LF2, C.St A105
1
2A Connection spool S.St A479 316/316L, C.St A350 LF2 13 Ball A351 CF8M 3
4 Stem S.St A479 316/316L, A564 Gr.630 H1150D 17-4PH
3
5* SeatPTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F)
6
6* Body seal PTFE, RPTFE, TFM, UHMWPE, Graphite 4
7* Stem thrust sealPEEK, CF PEEK, PCTFE (KEL-F), TFM(2), CF PTFE(2) 3
7a* Anti-abrasion ringPEEK, CF PEEK, PCTFE (KEL-F), TFM(2), CF PTFE(2) 3
8 Stop pin A582 303 59* Stem seal CF PTFE, TFM, Graphite 310 Follower B783 316L 3
Size 11/2”- 2” | DN40-DN50 | Class 150 / 300 | 73W/74W DS05 Series
Components & materials
17
14C
16C13C
1211
107a
9
4
18
2
653
156
6
5
3
5
4
7
1
89
7a
1014A
1312
16
14B
14
8
18
2A
17
7
10A
K
151
92 62 38
ø11.15
K1
29
B
A
TxL threadF P.C.D
W
L S
D C
M5 TYPx4ø36 P.C.D
øBall port
H
S
12
Floating Ball Valves
Dual-Safe (DB&B) valve
Std. port Unit Ball
Port 1A
B C D H KK1
L S W N P F TxLWeight
kg/ib Kv
150 300 150 300 150 300 CvDN80 mm 80.00 339.00 381.00 130.00 108.00 154.50 194.90 161.20 182.20 198.20 184.00 350.00 190.50 1"-14
UNF-2A"16.70 (F10) 102.00
M10X2044 50 1111
3" inch 3.15 13.35 15.00 5.12 4.25 6.08 7.67 6.35 7.17 7.80 7.24 13.78 7.50 0.66 4.02 97 110.2 1300
DN100 mm 100.00 377.00 417.00 150.00 124.00 170.50 210.90 175.70 196.70 212.70 208.00 350.00 230.00 1"-14 UNF-2A"
16.70 (F10) 102.00M10X20
71 82 2051
4" inch 3.94 14.84 16.42 5.91 4.88 6.71 8.30 6.92 7.74 8.37 8.19 13.78 9.06 0.66 4.02 156.5 180.8 2400
DN150 mm 150.00 651.00 673.00 250.00 179.00 248.40 302.20 218.20 239.20 255.20 324.00 846.50 279.40 11/2"-12 UNF-1A"
26.20 F(12) 125.00M12X20
201 220 4615
6" inch 5.91 25.63 26.50 9.84 7.05 9.78 11.90 8.59 9.42 10.05 12.76 33.33 11.00 1.03 4.92 443.2 485 5400
DN200 mm 200.00 929.00 925.00 300.00 241.00 353.60 - 258.20 279.20 295.20 - - 343.00 2" UN-2A"
56.00 (F14) 140.00M16X30
433 455 7949
8" inch 7.87 36.57 36.42 11.81 9.49 13.92 - 10.17 10.99 11.62 - - 13.50 2.20 5.51 954.6 1003.1 9300
Dual-Safe (DB&B) valve General DB&B Ordering code system
Size 3”- 8” | DN80-DN200 | Class 150 / 300 | 73W/74W DS05 Series
Valve dimensions
Threaded, BW, SW, flanged connections are available for bleed.Default size - 1/2" (DN15)
17
14C
16C13C
1211
107a
9
4
18
2
653
156
6
5
3
5
4
7
1
89
7a
1014A
1312
16
14B
14
8
18
2A
17
7
10A
K
151
92 62 38
ø11.15
K1
29
B
A
TxL threadF P.C.D
W
L S
D C
M5 TYPx4ø36 P.C.D
øBall port
H
S
13
Dual-Safe (DB&B) valve
Dual-Safe (DB&B) valve
Item Description Material specifications Qty.
10A* Slide bearing TF316 311 Disc spring A693 631 17-7PH 212 Stem nut C.st B18 ZP 313 Tab lock washer A240 304 213C Locking clip A167 304 114 Handle C.St. Zinc plated, A240 316L 214C Handle C.St. A29 G10200 Zinc plated, A240 430 114A Stop plate C.St. 1.0402 Zinc plated, A240 430 2
14B Wrench head Ductile lrion A536 Gr. 65-45-12, A216 WCB, A351 CF8M
2
16 Wrench bolt EN3506-1 A-70, A193 Gr B8/B8M 216C Handle nut A194 Gr 8M, DIN 3506 A4-80 117 Sleeve PVC 3
18 Body boltEN 3506-1 A2-70 / A4-80, A193 Gr B7 Zinc plated, A193 Gr B8M
24-32
20 Anti static spring A313 302 321 Anti static plunger A479 304 323 Tag (not shown) A167 304 1
Item Description Material specifications Qty.
1 Body A351 CF8M, A216 WCB 3
2 Ends A351 CF8M, A216 WCB, S.St A479 316/316L, C.St A350 LF2, C.St A105
1
2A Connection spool S.St A479 316/316L, C.St A350 LF2 13 Ball A351 CF8M 3
4 Stem S.St A479 316/316L, A564 Gr.630 H1150D 17-4PH
3
5* SeatPTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F)
6
6* Body seal PTFE, RPTFE, TFM, UHMWPE, Graphite 4
7* Stem thrust sealPEEK, CF PEEK, PCTFE (KEL-F), TFM(2), CF PTFE(2) 3
7a* Anti-abrasion ringPEEK, CF PEEK, PCTFE (KEL-F), TFM(2), CF PTFE(2) 3
8 Stop pin A582 303 39* Stem seal CF PTFE, TFM, Graphite 310 Follower B783 316L 3
Size 3”- 8” | DN80-DN200 | Class 150 / 300 | 73W/74W DS05 Series
Components & materials
18
65C
5B,5A3
5
4
71 27
89
7a
10A10
11
1213
17
1415
16
2
1/2" NPT, BSP
K
H2
B
W
TxL threadF PCD
H
A - THD
A1 - ANSI RF
S1 S L
H1
C D
øBall port
A2 - XBW, XSW
(1) For full port valve use one size up for all dimensions except of A1(ask Habonim team to provide)(2) ANSI #1500 RTJ and ANSI #2500 RTJ are available as well as PN250, PN350, PN400.The product weight is not specified in this section due to the verity of end configurations.
14
Floating Ball Valves
Dual-Safe (DB&B) valve
Dual-Safe (DB&B) valve General DB&B Ordering code system
Size 1/2”- 11/4” | DN15-DN32 | Class 1500 / 2500 | 28W DSN05NPT Series
Std. port Unit Ball
Port 1 AA1
A2 B C D H H1 H2 K L S S1 W M N P F TxLKv
1500 2500 Cv
DN15 mm 11.10 144.00 267.00 315.00 210.00 86.00 29.00 37.80 62.00 92.00 117.00 31.00 51.00 152.00 152.00 79.00 5.503/8" UNF
6.70 (F03) 36.00M5X8
6.9
1/2" inch 0.44 5.67 10.51 12.40 8.27 3.39 1.14 1.49 2.44 3.62 4.61 1.22 2.01 5.98 5.98 3.11 0.22 0.26 1.42 8.0
DN20 mm 13.00 146.00 275.00 319.00 214.00 86.00 31.00 51.00 82.00 101.00 117.00 31.00 46.00 187.00 170.00 79.00 7.507/16" UNF
5.50 (F04) 36.00M5X8
9.4
3/4" inch 0.51 5.75 10.83 12.56 8.43 3.39 1.22 2.01 3.23 3.98 4.61 1.22 1.81 7.36 6.69 3.11 0.30 0.22 1.42 10.9
DN25 mm 20.60 191.00 320.00 374.00 255.00 115.00 43.75 66.00 93.00 115.00 127.00 40.40 66.00 237.00 220.00 108.00 8.709/16" UNF
14.30 (F05) 50.00M6X8
27.6
1" inch 0.81 7.52 12.60 14.72 10.04 4.53 1.72 2.60 3.66 4.53 5.00 1.59 2.60 9.33 8.66 4.25 0.34 0.56 1.97 32.0
DN32 mm 25.40 201.00 350.00 429.00 261.00 115.00 51.50 69.50 95.50 119.00 137.00 40.00 66.00 237.00 220.00 128.00 8.709/16" UNF
14.30 (F05) 50.00M6X8
49.3
11/4" inch 1.00 7.91 13.78 16.89 10.28 4.53 2.03 2.74 3.76 4.69 5.39 1.57 2.60 9.33 8.66 5.04 0.34 0.56 1.97 57.0
Valve dimensions
18
65C
5B,5A3
5
4
71 27
89
7a
10A10
11
1213
17
1415
16
2
1/2" NPT, BSP
K
H2
B
W
TxL threadF PCD
H
A - THD
A1 - ANSI RF
S1 S L
H1
C D
øBall port
A2 - XBW, XSW
15
Dual-Safe (DB&B) valve
Dual-Safe (DB&B) valve
Size 1/2”- 11/4” | DN15-DN32 | Class 1500 / 2500 | 28W DSN05NPT Series
Item Description Material specifications Qty.
10 Follower B783 316L 210A Slide bearing TF316 211 Disc spring A693 631 17-7PH 412 Stem nut DIN 3506 A4-80, A194 Gr 8M 213 Locking clip A164 8, 8A 214 Handle C.St. A29 G10200 Zinc plated, A240 430 215 Serrated washer A194 6 216 Handle nut A194 Gr 8M, DIN 3506 A4-80 217 Sleeve PVC 2
18 Body boltEN 3506-1 A2-70 / A4-80, A193 Gr B7 Zinc plated, A193 Gr B8M
16
20 Anti static spring A313 302 221 Anti static plunger A479 304 223 Tag (not shown) A167 304 127 NEEDLE VALVE S.St. 316/17-4PH 1
Item Description Material specifications Qty.
1 Body S.St A479 316/316L, C.St A350 LF2 12 Ends S.St A479 316/316L, C.St A350 LF2 23 Ball A351 CF8M, S.St A479 316/316L 24 Stem A564 Gr.630 H1150D 17-4PH 2
5* Seat PEEK, CF PEEK, PVDF, DELRIN, PCTFE (KEL-F)
2
5A Seat insertPEEK, CF PEEK, PVDF, DELRIN, PCTFE (KEL-F)
2
5B Seat housing S.St A479 316/316L, C.St A350 LF2 25C Seat seal PTFE, NBR, Graphite, Viton 26* Body seal PTFE, RPTFE, TFM, UHMWPE, Graphite 2
7* Stem thrust sealPEEK, CF PEEK, PCTFE (KEL-F), TFM, CF PTFE
2
7a** Anti-abrasion ringPEEK, CF PEEK, PCTFE (KEL-F), TFM, CF PTFE
2
8 Stop pin A582 303 29* Stem seal CF PTFE, TFM, Graphite 2
Components & materials
16
Floating Ball Valves
Dual-Safe (DB&B) valve
In some applications the available options above are limited to specific sizes. Please consult with Habonim for details.(1) Class #900 for 47 series up to 2" regular port. For 21/2" - class #600.(2) Default for 28 series.(3) 1/2" bleed connection default for all dual safe valves up to size 2". For sizes 21/2" and up contact Habonim for details.(4) Other connections available on request.(5) Other special fautures available on request.
Ordering code systemThe Habonim high pressure ball valve identification code
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 . . 30
2 0 F 4 7 W - F F 6 6 A G / 1 5 0 - D S 0 5 N
Size Features Series Design Body End Ball Stem Seat Seal End Connection Special featuresBleed
connection size
Bleed connection
typeSpecial features
Size
Code inch mm
02 1/4” 8
03 3/8” 10
05 1/2” 15
07 3/4” 20
10 1” 25
12 11/4” 32
15 11/2” 40
20 2” 50
25 21/2” 65
30 3” 80
40 4” 100
60 6” 150
80 8” 200
Features
A Antistatic
F Firesafe
C Cryogenic
K Chlorine service
O Clean assembly for O2 service
M Ammonia service
Design
P ISO pad basic designX HermetiX™ stem seal
WHermetiX™ graphite free fire safe stem seal
GHermetiX™ graphite free fire safe stem seal FDA compliant
Body / End
4 C. Steel A216 WCB / A105
R C. Steel A352 LC1
9 C. Steel A352 LCB
F C.Steel A350 LF2
6 S. Steel A351 CF8M, A479 316\316L
7 Monel A494 M-35-1
I Inconel 625 A494 CW-6MC
A Alloy-20 A351 CN7M
C Alloy C276 A494 CW-12MW
W Alloy C22 A494 CX-2MW
D Duplex A995 CD3MN 4A
K Super Duplex A995 CE3MN 5A
S 254SMO A351 CK3MCuN
Ball / Stem
6 S. Steel A351 CF8M, A479 316\316L
8 S. Steel A479 304\304L
M 17-4PH A564 Gr 630 H1150D
Z Inconel 718 B637 N07718
7 Monel B164 N04400
A Alloy-20 B473 N08020
C Alloy-C276 B574 N10276
W Alloy-C22 B574 N06022
D Duplex A479 S31803
K Super Duplex A479 S32750
S 254SMO A479 S31254
End connectionswelded
BW5 Buttweld schd. 5BW10 Buttweld schd. 10BW Buttweld schd. 40BW80 Buttweld schd. 80XBW Extended buttweld schd. 40XBW80 Extended buttweld schd. 80XBW160(2) Extended buttweld schd. 80SW Socket weldXSW(2) Extended socket weldBWO Buttweld tube ODETO Extended tube ODSWO Socket weld tube ODBWI Buttweld ISO 1127BWD Buttweld DIN 11860
Threaded
NPT ANSI B1.20.1 - National Pipe Taper thread
MNPT Male NPT
BSPT EN 10226-2 - BSP Taper thread, on thread sealing
MBSPT Male BSPT
DIN2999 EN 10226-1 - BSP parallel thread, on thread sealing
DIN3852 DIN 3852 - BSP parallel thread with gasket sealing
AS5202 SAE Internal Straight Thread
Series
47 ANSI #900 std. port(1)
73 ANSI #150 Full port
74 ANSI #300 Full port
28 ANSI #2500 std. port
Dual-Safe (DB&B) valve General DB&B Ordering code system
Seat
A TFM
C PCTFE
K CF PEEK
L Virgin PEEK
P CF PTFE
R 15% Glass filled RPTFE
S VESPEL
T PTFE
U UHMWPE
Y Derlin
W PVDF
Seal
G Expanded graphite
I Impregnated Graphite
R 15% Glass filled RPTFE
T PTFE
U Uhmwpe
V Viton®
B NBR
Dual safe featuresDual safe designation
DS Dual Safe with ball valve bleed
DSN Dual Safe with needle valve bleed
Bleed connection size02 1/4” (DN8)03 3/8” (DN10)05(3) 1/2” (DN15)07 3/4” (DN20)10 1” (DN25)
Bleed connection(4)
- The same as the line connections
N ANSI B1.20.1 - NPT
D EN 10226-1 - BSP parallel thread
B EN 10226-2 - BSP taper thread
BW Buttweld schd. 40
Special features(5)
03, 06, 09 In-line stems special orientation
Clamp
LL Compression fitting (Imperial)
LM Compression fitting (metric)TC Tri-ClampGR Graylock
Flanged150 ANSI B16.5 #150 RF300 ANSI B16.5 #300 RF600 ANSI B16.5 #600 RF900 ANSI B16.5 #900 RF1500 ANSI B16.5 #1500 RF2500 ANSI B16.5 #2500 RF1500RTJ ANSI B16.5 #1500 RTJ2500RTJ ANSI B16.5 #2500 RTJPN16 EN1092 PN16 RFPN40 EN1092 PN40 RFPN64 EN1092 PN64 RFPN100 EN1092 PN100 RFPN160 EN1092 PN160 RFPN250 EN1092 PN250 RFPN350 EN1092 PN350 RFPN400 EN1092 PN400 RF
17
Dual-Safe (DB&B) valve
Dual-Safe (DB&B) valve
Dua
l-saf
e va
lves
04/
18 R
EV2.
04
Habonim UKTel: +44-1633-484554Fax: [email protected]
Habonim ISRAELTel: +972-4-6914911Fax: [email protected]
Habonim CHINATel: + 86 21 64453190 *[email protected]
Habonim USAToll Free Phone: 1-866-261-8400Toll Free Fax: [email protected]
Habonim AUSTRALIATel: +61 400 001 [email protected]
Habonim SINGAPORETel: +65 6296 7828Fax: +65 6299 [email protected]
Habonim EUROPETel: +34 640 384 [email protected][email protected]
www.habonim.com Three piece valves Cat.
w w w . h a b o n i m . c o m