Automotive Worldwide

Dual Phase steels

Extract from the product catalogue -European edition

Note: Information contained in this catalogue is subject to change.Please contact our sales team whenever you place an order to ensure that your requirements are fully met.

Please contact us if you have a specific requirement that is not included in the range of products and services covered by this catalogue.We are also reachable by the e-mail address automotive.request@arcelormittal.com.

 

We are also reachable by the e-mail address automotive.request@arcelormittal.com.  

Dual Phase steels Advanced high strength steels

Description

Dual Phase steels offer an outstanding combination of strength and drawability as a result of their microstructure, in which a hard martensitic or bainitic phase is dispersed in a soft ferritic matrix. These steels have high strain hardenability. This gives them good strain redistribution capacity and thus drawability as well as finished part mechanical properties, including yield strength, that are far superior to those of the initial blank. The yield strength of Dual Phase steels is further increased by the paint baking (also called Bake Hardening, BH) process.

High finished part mechanical strength lends these steels excellent fatigue strength and good energy absorption capacity, making them suitable for use in structural parts and reinforcements. The strain hardening capacity of these steels combined with a strong bake hardening effect gives them excellent potential for reducing the weight of structural parts and even " notably in the case of FullFinished 280 DP (FF 280 DP) " skin parts.

Applications

Given their high energy absorption capacity and fatigue strength, cold rolled Dual Phase Steels are particularly well suited for automotive structural and safety parts such as longitudinal beams, cross members and reinforcements. FF 280 DP can be used to make visible parts with 20% higher dent resistance than conventional high strength steels, resulting in a potential weight saving of some 15%.

As a result of its mechanical strength, hot rolled Dual Phase 600 can be used to reduce the weight of structural parts by decreasing their thickness. Relevant automotive applications include:

wheel webslongitudinal railsshock towersfasteners.

Bumper in Dual Phase 1180 (thickness: 1.35 mm)

2

B-pillar reinforcement in Dual Phase 980 LCE Y600 Extragal®

Wheel web in hot rolled Dual Phase 600 -Patented VersaStyle® wheel from Hayes Lemmerz International

ArcelorMittal has an extensive database on the forming and service characteristics of the entire range of Dual Phase steels. To integrate these steels at the design stage, a team of experts is available to carry out specific studies based on modeling and testing.

Designation and standard

  Euronorms VDA 239-100

FF 280 DP HCT500X (+Z) CR290Y490T-DP (-GI) Dual Phase 450 HCT450X (+ZE, +Z, +ZF) Dual Phase 500 HCT490X (+ZE, +Z) CR290Y490T-DP (-UNC,-EG,-GI) Dual Phase 600 HCT590X (+ZE, +Z, +ZF, +ZM) CR330Y590T-DP (-UNC,-EG,-GI,-GA,-ZM) Dual Phase 780 Y450 HCT780X (+ZE, +Z, +ZF) CR440Y780T-DP (-GI,-GA) Dual Phase 780 LCE Y450 HCT780X (+ZE) CR440Y780T-DP (-UNC,-EG) Dual Phase 780 Y500

Dual Phase 780 LCE Y500

Dual Phase 980 LCE Y600 HCT980X (+ZE, +Z, +ZF) CR590Y980T-DP(-UNC,-EG,-GI,-GA) Dual Phase 980 LCE Y660

Dual Phase 980 Y700 HCT980XG (+ZE) CR700Y980T-DP (-UNC,-EG) Dual Phase 980 LCE Y700 HCT980XG (+ZE, +Z, +ZF) CR700Y980T-DP (-UNC,-EG,-GI) Dual Phase 1180 HCT1180G2 (+ZE) CR900Y1180T-CP (-UNC,-EG) Dual Phase 600 HDT580X HR330Y580T-DP (-UNC) Dual Phase 780

3

  Euronorms Uncoated (EN 10338 :2015): Steel grade nameElectrogalvanized (EN 10338 :2015 + EN 10152 :2017): Steel grade name +ZEGalvannealed (EN 10346 :2015): Steel grade name +ZFExtragal® (EN 10346 :2015): Steel grade name +ZZagnelis® (EN 10346 :2015): Steel grade name +ZM

VDA 239-100 Uncoated: Steel grade name-UNCElectrogalvanized: Steel grade name-EGGalvannealed: Steel grade name-GAExtragal®: Steel grade name-GIZagnelis®: Steel grade name-ZM 

 Hot rolled      Cold rolled

FF 280 DP (Full Finished): grade specially developed for skin parts.LCE: Low Carbon Equivalent grade used to optimize properties in service.The above indicative table summarizes the European and VDA standards corresponding to the ArcelorMittal product range.

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical properties (see table below).

Technical characteristics

Mechanical propertiesGuaranteed for 20x80 mm ISO tensile specimens (uncoated sheet)ST -Transverse direction (perpendicular to the rolling direction) / SL -Rolling direction

  YS (MPa) UTS (MPa)ef (%)

L0 = 80 mmth < 3 mm

Ef (%)L0 = 5,65 √S

0 (mm)th ≥ 3 mm

n BH2 (MPa) Direction

 FF 280 DP* 300 -380 ≥ 490 ≥ 25 0,15 30 ST Dual Phase 450 280 -340 450 -530 ≥ 27 0,16 30 ST Dual Phase 500 300 -380 500 -600 ≥ 25 0,15 30 SL Dual Phase 600 330 -410 600 -700 ≥ 21 0,14 30 SL Dual Phase 780 Y450 450 -550 780 -900 ≥ 15 0,10 30 SL Dual Phase 780 LCE

Y450450 -550 780 -900 ≥ 15 0,10 30 SL

 Dual Phase 780 Y500 500 -600 780 -900 ≥ 13 0,10 30 SL Dual Phase 780 LCE

Y500 500 -600 780 -900 ≥ 13 0,10 30 SL

 Dual Phase 980 LCE Y600 600 -750 980 -1100 ≥ 10 30 ST

 Dual Phase 980 LCE Y660 660 -830 980 -1100 ≥ 10 30 ST

 Dual Phase 980 Y700 700 -850 980 -1100 ≥ 8 30 SL Dual Phase 980 LCE

Y700 700 -850 980 -1100 ≥ 8 30 SL

 Dual Phase 1180 900 -1100 ≥ 1180 ≥ 5 30 SL Dual Phase 600 330 -460 580 -670 ≥ 22 ≥ 24 30 SL Dual Phase 780* ≥ 450 ≥ 750 ≥ 15 ≥ 18 30 SL

  Hot rolled      Cold rolled

* The guarantees for this grade are subject to change.FF 280 DP (Full Finished): grade specially developed for skin parts.LCE: Low Carbon Equivalent grade, used to optimize properties in service.

Chemical Composition (%)

4

 

Chemical Composition (%)

  C Mn Si  Max Max Max

FF 280 DP 0,14 1,6 0,40 Dual Phase 450 0,08 1,6 0,40 Dual Phase 500 0,14 1,6 0,40 Dual Phase 600 0,14 2,1 0,40 Dual Phase 780 Y450 0,17 2,2 0,60 Dual Phase 780 LCE Y450 0,10 2,0 0,40 Dual Phase 780 Y500 0,17 2,2 0,60 Dual Phase 780 LCE Y500 0,10 2,0 0,40 Dual Phase 980 LCE Y600 0,11 2,9 0,70 Dual Phase 980 LCE Y660 0,11 2,9 0,70 Dual Phase 980 Y700 0,18 2,4 0,60 Dual Phase 980 LCE Y700 0,11 2,9 0,70 Dual Phase 1180 0,18 2,4 0,60 Dual Phase 600 0,09 1,0 0,25 Dual Phase 780 0,09 1,0 0,30

  Hot rolled      Cold rolled

FF 280 DP (Full Finished): grade specially developed for skin parts.LCE: Low Carbon Equivalent grade, used to optimize properties in service.

Dual Phase 600

Dual Phase 980 Y700

5

The service properties of Dual Phase steels are guaranteed by the controlled manufacturing process. The controlled (temperature, cooling speed) annealing cycle in particular ensures achievement of the Dual Phase microstructure and reproducibility of mechanical properties.

Available coatings and Worldwide availability

  Uncoated Electrogalvanized Extragal®

  EUR NAM SAM RSA CHI EUR NAM SAM RSA CHI EUR NAM SAM RSA CHI

Dual Phase 450                    

FF 280 DP /Dual Phase 500

                   

Dual Phase 600            

Dual Phase 600 Y420

               

Dual Phase 780 Y450

               

Dual Phase 780 LCE Y450, Y500

                     

Dual Phase 780 Y500

                   

Dual Phase 980 Y600

                             

Dual Phase 980 LCE Y600

           

Dual Phase 980 LCE Y660, Y700

             

Dual Phase 980 Y700

                         

Dual Phase 1180                

Dual Phase 600                        

Dual Phase 780                            

  Galvannealed Zagnelis® Jetgal®

  EUR NAM SAM RSA CHI EUR NAM SAM RSA CHI EUR NAM SAM RSA CHI

Dual Phase 450                          

FF 280 DP /Dual Phase 500

                         

Dual Phase 600                  

Dual Phase 600 Y420

                     

Dual Phase 780 Y450

                       

Dual Phase 780 LCE Y450, Y500

                           

Dual Phase 780 Y500

                         

Dual Phase 980 Y600

                           

Dual Phase 980 LCE Y600

                     

Dual Phase 980 LCE Y660, Y700

                         

Dual Phase 980 Y700

                           

Dual Phase 1180                        

Dual Phase 600                              

Dual Phase 780                              

6

 Hot rolled      Cold rolled

Available in non-visible part quality Undergoing customer testing Under development Available in visible and non-visible part quality (Z)

EUR : Europe Region -NAM : North America Region -SAM : South America Region -RSA : South Africa Region -CHI : China

X available / O under developmentFF 280 DP (Full Finished): grade specially developed for skin parts.Please inquire about the availability of products shown as being under development or left blank in the table.LCE: Low Carbon Equivalent grade, used to optimize properties in service.

Recommendations for use and secondary processing

FormingDual Phase steels offer an excellent combination of strength and drawability as a result of their good ductility and strain hardening capacity from the beginning of deformation, which ensure homogeneous strain redistribution and reduce local thinning. For example, in Dual Phase 500, the yield strength increases by about 120 MPa after 2% of plastic strain in uniaxial tension (a phenomenon known as work hardening or WH2). The yield strength can be further increased through bake hardening (BH2) after paint curing. FF 280 DP can also be used to manufacture skin parts, as a result of its excellent biaxial and uniaxial stretch formability. Dual Phase steels can be drawn on conventional tools, provided the settings are properly adjusted. For example, drawing pressure should be increased by approximately 20% for a Dual Phase 600, compared to a micro-alloyed (HSLA) type steel of the same thickness. It should be noted that these steels, especially the highest grades, are sensitive to the so-called springback phenomenon. Component geometry must be carefully studied during design (small die radius, reinforcement perpendicular to bends to stiffen open parts, etc.) and drawing sequence definition (overbending, calibration tool, punch stroke, increased blank-holder force, etc.).ArcelorMittal has developed expertise in controlling springback by means of part and drawing tool design (OUTIFO method).

Forming limit curves for the cold-rolled Dual Phase family of steels (typical data)

For more information about the forming of Dual Phase steels in special thicknesses and with special coatings, please consult us.

Welding

Although Dual Phase steels are more highly alloyed than HSLA steels, they can be readily welded using conventional resistance spot welding processes, provided the parameters used in industrial conditions are adjusted. The table below gives indicative examples of spot weld properties for homogeneous Dual Phase steel joints complying with the ISO 18278-2 standard.

7

Although Dual Phase steels are more highly alloyed than HSLA steels, they can be readily welded using conventional resistance spot welding processes, provided the parameters used in industrial conditions are adjusted. The table below gives indicative examples of spot weld properties for homogeneous Dual Phase steel joints complying with the ISO 18278-2 standard.

  Coating Thickness (mm)

Nugget diameter (mm)

Pure tensile (kN)

Weld diameter (mm)

Tensile-shear (kN)

Dual Phase 500 - 1.5 8 14.2 8.8 18.4 Dual Phase 600 Extragal® 1.5 7.7 13.1 9.5 22.3 Dual Phase 780 Extragal® 1.5 8.9 10.5 9.4 25.6 Dual Phase 780

LCE - 1.5 7.6 14.3 6.6 22.7

Dual Phase 980 LCE Extragal® 1.5 8.4 13.2 10.1 30.4

Dual Phase 600 - 3 11.6 32.6 11.2 46.7 

 Hot rolled      Cold rolled

For coated (galvanized and alloy galvanized) products, electrode life tests show values characteristic of the type of coating considered, with no significant modification due to the Dual Phase substrate. In butt or lap MAG (Metal Active Gas) arc welding, maximum hardness in the fusion zone does not exceed 300 HV for a Dual Phase 600, whatever the parameters. The weld seams meet ISO 25817 Class B requirements. Recommended welding consumables are:

Filler: G3Si1 NF EN 440;Protective gas: Ar + 8% CO2.

Dual phase steels have excellent mechanical strength in laser lap welding. Based on long shop-floor experience in characterizing its products, ArcelorMittal can provide technical assistance in adjusting the welding parameters for steels in the Dual Phase range.

Fatigue strength

As a result of their high mechanical strength, Dual Phase steels have good fatigue properties. Examples of Wöhler curves for a variety of Dual Phase steels are given in the two graphs below. The curves plot maximum stress versus number of cycles to failure. They are calculated for two loading ratios: tension-compression R=-1 and tension-tension R=0.1.

Wöhler curves or S-N curves for a variety of Dual Phase steels

8

The graph below shows the low-cycle fatigue or E-N curves for the same steels. The curves plot strain amplitude versus number of reversals to failure (one cycle corresponds to two reversals). Other high and low cycle fatigue data can be provided on request.

ArcelorMittal can make a Dual Phase steel fatigue database available to its customers.

Impact strength

As a result of their very high tensile strength, Dual Phase steels are particularly suitable for parts designed to absorb energy during an impact. Dual Phase steels have been characterized in dynamic axial compression tests using an top hat structure with a spot-welded closure plate at an impact velocity of 56 kph. These tests have demonstrated the good impact behavior of these steels.

Mass reduction potential compared to that of an HSLA 380 steel (reference)

© ArcelorMittal | Last update: 03-05-2018

9