dsl-2750uc1_user manual_v.1.0.11_06.07.12_en

8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN

1/138


2/138

DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Contents

Chapter 1. Introduction..........................................5

Contents and Audience.......................................................5Conventions.................................................................5

Document Structure..........................................................5

Chapter 2. Overview..............................................6

General Information.........................................................6

Specifications..............................................................

!roduct Appearance.........................................................11

Front Panel..............................................................11

Back Panel...............................................................12

Deliver" !ac#a$e...........................................................1%Chapter %. Installation and Connection..........................1&

'efore (ou 'e$in...........................................................1&

Connectin$ to !C...........................................................15

PC with Ethernet Adapter.................................................15

Obtaining IP Address Autoaticall! in O" #indows $P......................1%

Obtaining IP Address Autoaticall! in O" #indows &.......................1'

PC with #i(Fi Adapter....................................................2)

Con*iguring #i(Fi Adapter in O" #indows $P...............................25

Con*iguring #i(Fi Adapter in O" #indows &................................2%

Connectin$ to )e*+*ased Interface..........................................2,

Savin$ and -estorin$ Settin$s..............................................%2

Chapter &. Confi$urin$ via )e*+*ased Interface..................%%

)iards....................................................................%%

Internet "etup #i+ard....................................................,,

PPPoE or PPPoA Connection..............................................35

IPoA or Static IP Connection...........................................39

Dynamic IP Connection..................................................42

Bridge Connection......................................................45

3G Connection..........................................................47

"ite "etup #i+ard........................................................5-

#i(Fi "etup #i+ard.......................................................51

Status.....................................................................55

etwork "tatistics.......................................................55

/"0 "tatus...............................................................5%

#A "tatus...............................................................5&

/CP.....................................................................5

3outing 4able............................................................5'

0A Clients..............................................................%-

Pae 2o! "3#


3/138


and Built-in Switch

User Manual

/et........................................................................61

#A......................................................................%1

Creating ADSL WA Connection...........................................!2

Creating Et"ernet WA Connection.......................................!#

Creating 3G WA Connection.............................................72

0A......................................................................&5

#atchdog.................................................................&&

)i+0i......................................................................

Coon settings..........................................................&'

Basic "ettings...........................................................-

"ecurit! "ettings........................................................1

AC Filter...............................................................)

"tation 0ist.............................................................%

#P"......................................................................&

$%ing WPS &'nction (ia We)*)a%ed Inter+ace.............................#9

$%ing WPS &'nction ,it"o't We)*)a%ed Inter+ace.........................#9

Additional "ettings......................................................'1

Advanced...................................................................2

"P.....................................................................',

6PnP.....................................................................')

Inter*ace 7rouping.......................................................'5

//".....................................................................'&

/"......................................................................'3outing..................................................................''

3IP.....................................................................1-1

A/"0....................................................................1-2

3eote Access...........................................................1-,

0irewall..................................................................15

IP Filters..............................................................1-5

8irtual "er9ers.........................................................1-

/:.....................................................................11-

Application 3ules.......................................................111

AC Filter..............................................................11,

3S' 4odem.................................................................115

In*oration.............................................................115

PI.....................................................................11%

3S' Stora$e...............................................................11

In*oration.............................................................11&

Filebrowser.............................................................11

Print "er9er............................................................11'

"aba...................................................................12-

Control...................................................................121

Parent Control..........................................................121

630 Filter..............................................................12,

Pae 3o! "3#


4/138


and Built-in Switch

User Manual

S"stem....................................................................125

Adinistrator Password..................................................125

Con*iguration...........................................................12%

"!ste 0og..............................................................12&

Firware 6pgrade........................................................12'

4P Client..............................................................1,-

Ping....................................................................1,1

Chapter 5. Operation Guidelines................................1%2

Supported 3S' 4odems......................................................1%2

Safet" Instructions.......................................................1%%

)ireless Installation Considerations......................................1%&

Creatin$ wo Connections on One Channel...................................1%5

A/"0 #A Connections....................................................1,5

Ethernet #A Connections................................................1,%

Chapter 6. A**reviations and Acron"ms..........................1%

Pae 4o! "3#


5/138


and Built-in Switch

User Manual

Introduction

CH!"#$ 1% I&"$'DUC"I'&

Contents and Audience

This manual describes the router DSL-2750U and explains how to configure and operate it

This manual is intended for users familiar with basic networ!ing concepts" who create an in-home

local area networ!" and s#stem administrators" who install and configure networ!s in offices

Conventions

#(a)*le Descri*tion

text The bod# text of the manual

Before You Begin $ reference to a chapter or section of this manual

Quick Installation Guide $ reference to a document

C+an,e$ name of a menu" menu item" control %field" chec!box" drop-

down list" button" etc&

12.16,.1.1 Data that #ou should enter in the specified field

! 'nformation $n important note

Document Structure

Chapter 1describes the purpose and structure of the document

Chapter 2gi(es an o(er(iew of the router)s hardware and software features and describes its

appearance and the pac!age contents

Chapter 3explains how to install the router DSL-2750U and configure a *+ in order to access its

web-based interface

Chapter 4describes all pages of the web-based interface in detail

Chapter 5includes safet# instructions" tips for networ!ing and configuring the de(ice" and the list

of supported US, modems

Chapter introduces abbre(iations and acron#ms used in this manual

Pae 5o! "3#


6/138


and Built-in Switch

User Manual

'erie.

CH!"#$ 2% '/#$/I#

General Information

DSL-2750U is a multifunction ./$DSL/thernet router with 1i-i and built-in switch The router

allows accessing the 'nternet (ia . .S3 or +D3$ networ! %with a . US, modem 4connected&

'n addition" the de(ice allows accessing the 'nternet (ia $DSL technolog# and (ia thernet

technolog#

The router is euipped with an $DSL port to connect to an $DSL line and 6 thernet ports to

connect wor!stations Due to this feature" DSL-2750U represents a moderate-priced solution for

creating wired networ!s without an additional switch 'n addition" an# thernet port of the de(ice

can be used to connect to a pri(ate thernet line $lso the router has a US, port designed to connect

a US, modem" printer" or US, storage

The router supports reser(ation of an additional channel The reser(ation function !eeps the router

connected to the 'nternet e(en when the main connection is not a(ailable

DSL-2750U can operate as a base station for connecting wireless de(ices of the standards 0244b"

0244g" and 0244n2 The router supports multiple functions for the wireless interface8 se(eral

securit# standards %1*" 1*$/1*$2&" 3$+ address filtering" and the 1*S function

The wireless router DSL-2750U includes a built-in firewall The ad(anced securit# functions

minimi9e threats of hac!er attac!s" pre(ent unwanted intrusions to #our networ!" and bloc! access

to unwanted websites for users of #our L$:;ou can configure and manage the settings of DSL-2750U (ia the user-friendl# web-based interface

%the interface is a(ailable in se(eral languages&

4 :ot included in the deli(er# pac!age D-Lin! does not guarantee compatibilit# with all US, modems *lease" refer

to the!upported "!B #ode$ssection" page 42

2 The maximum speed of the wireless connection is limited b# the chipset up to 2003bps

Pae o! "3#


7/138


and Built-in Switch

User Manual

'erie.

Specifications*

Interfaces:

$DSL8 4

1L$:8 built-in 0244b" g" and n wireless interface

US,8 US, 20 t#pe $ port

Wireless Network:

' 0244n standard" ' 0244b/g compliant

Support of guest wireless networ!

1* data encr#ption

1*$/1*$2 securit# supporting T?'*" $S and T?'*@$S

3$+-based access to wireless networ!

*': and *,+ methods of 1*S

$d(anced settings

ADSL Standards:

$DSL8

multi-mode" $:S' T464 'ssue 2" 'TU-T .AA24 %.dmt& $nnex $" 'TU-T .AA22

%.lite& $nnex $" 'TU-T .AA64 %.hs&

$DSL28

'TU-T .AA2 %.dmtbis& $nnex $/L/3" 'TU-T .AA26 %.litebis& $nnex $

$DSL2@8

'TU-T .AA25 $nnex $/L/3

B The de(ice features are subCect to change without notice or the latest (ersions of the firmware and rele(ant

documentation" (isit wwwdlin!ru

The maximum speed of the wireless connection is limited b# the chipset up to 2003bps

Pae 7o! "3#
http://www.dlink.ru/http://www.dlink.ru/


8/138


and Built-in Switch

User Manual

'erie.

WAN Connection Types:

.

$DSL8

***o

***o$

'*o$

Static '*

D#namic '*

,ridge

thernet8

***o

Static '*

D#namic '*

,ridge

ATM/PPP Protocols:

,ridged and routed thernet encapsulation

+-based or LL+-based multiplexing

$T3 orum U:'4/60 *+ %up to *+s&

$T3 $daptation La#er T#pe 5 %$$L5&

'TU-T 'E40 F$3 6/5 loopbac!

$T3 GoS

*** o(er $T3 %


9/138


and Built-in Switch

User Manual

'erie.

Network Protocols and Fnctions:

Static '* routing

:$T %Network Address Translation&

DH+* ser(er/client/rela#

D:S rela#

DD:S

U*n*

Support of L$:

'.3* prox#

'.3* snooping


10/138


and Built-in Switch

User Manual

'erie.

$S% Stora!e:

ile browser

*rint ser(er

Shared access to US, storage %Samba&

Confi!ration and Mana!e"ent:

3ultilingual web-based interface for configuration and management

$ccess (ia TL:T

irmware update (ia web-based interface

Sa(ing/restoring configuration to/from file

Support of remote logging

S:3* agent

$utomatic s#nchroni9ation of s#stem time with :T* ser(er

*ing function

L'Ds:

*ower

L$: 4-6

1L$:

1*S

US,

DSL

'nternet

Power:

xternal power adapter D+ 42/4$

F:/F power switch

F:/F 1i-i switch


11/138


and Built-in Switch

User Manual

'erie.

Product Appearance

Front Panel

Figure 1. Front panel view.

L#D Mode Descri*tion

!o.er

Solid green The router is powered on

No light The router is powered off

Solid red $ malfunction of the router

L& 1-4

Solid green

$ de(ice is connected to the port of the router %for the L$: port

configured as the 1$: port8 the router is connected to an thernet

line&

Blinking green The rele(ant L$: port is acti(e %upstream or downstream traffic&

L&Solid green The router)s 1L$: is on

Blinking green The 1L$: interface is acti(e %upstream or downstream traffic&

!S

Solid green$ wireless de(ice is connected to the router)s 1L$: %lights for

se(eral minutes&

Blinking green $ttempting to add a wireless de(ice (ia the 1*S function

US

Solid green $ US, de(ice is connected to the router)s US, port

No light :o US, de(ice

DSL

Solid green DSL has been s#nchroni9ed

Blinking green Detecting a carrier signal and s#nchroni9ing DSL

No light :o carrier signal

Internet

Solid green $ 1$: connection %$DSL and/or thernet& is established

Blinking green The 1$: interface is acti(e %upstream or downstream traffic&

Solid red $n authori9ation failure

No lightThe router is in the bridge mode or no 1$: connection %neither

thernet nor $DSL& is established

Pae 11o! "3#


12/138


and Built-in Switch

User Manual

'erie.

Back Panel

Figure 2. Back panel view.

!ort Descri*tion

DSL $ DSL port to connect the router to the telephone line

L& 1-46 thernet ports to connect thernet de(ices Fne port can be used to connect to a

pri(ate thernet line

US $ US, port to connect a US, modem" printer" or storage

!S $ button to uic!l# add wireless de(ices to the router)s 1L$:

I$#L#SS

'&'66$ button to turn the router)s wireless interface on/off

'&'66 $ button to turn the router on/off

12/1 *ower connector

Pae 12o! "3#


13/138


and Built-in Switch

User Manual

'erie.

Delivery Package

The following should be included8


14/138


and Built-in Switch

User Manual

Installation and Connection

CH!"#$ 3% I&S"LL"I'& &D C'&C"I'&

Before You Begin

*lease" read this manual prior to installing the de(ice 3a!e sure that #ou ha(e all the necessar#

information and euipment

)peratin! Syste"

+onfiguration of the multifunction ./$DSL/thernet router DSL-2750U %hereinafter referred to

as Jthe routerK& is performed (ia the built-in web-based interface The web-based interface is

a(ailable from an# operating s#stem that supports a web browser

We* %rowser

The following web browsers are recommended8 1indows 'nternet xplorer" 3o9illa irefox" orFpera

or successful operation" =a(aScript should be enabled on the web browser 3a!e sure that

=a(aScript has not been disabled b# other software %such as (irus protection or web user securit#

pac!ages& running on #our computer

Wired or Wireless NIC +'t(ernet or Wi,Fi Adapter-

$n# computer that uses the router should be euipped with an thernet or 1i-i adapter %:'+& 'f

#our computer is not euipped with such a de(ice" install an thernet or 1i-i adapter prior to using

the routerWireless Connection

1ireless wor!stations from #our networ! should be euipped with a wireless 0244b" g" or n :'+

%1i-i adapter& 'n addition" #ou should specif# the (alues of SS'D" channel number and securit#

settings defined in the web-based interface of the router for all these wireless wor!stations

$S% Mode"

To connect to the . .S3 or +D3$ networ!" #ou should use a . US, modem +onnect it to the

US, port of the router" then access the web-based interface of the router" and #ou will be able to

configure connection to the 'nternet5

!

;our US, modem should be euipped with an acti(e identification card %S'3 or


15/138


and Built-in Switch

User Manual


Connecting to PC

PC with Ethernet Adapter4 3a!e sure that #our *+ is powered off

2 +onnect an thernet cable between an# of four thernet ports located on the bac! panel of

the router and the thernet port of #our *+

%o connect &ia 3G net'ork(connect #our US, modem to the US, portElocated on the bac!

panel of the router

!'f #ou need to connect or change a US, modem to another one when the router is powered

on" power off the de(ice" connect the modem to the US, port" and power on the router

6 %o connect the router to a )!* line(connect a phone cable between the DSL port of the

router and the ADSL )$Tport of the splitter +onnect #our phone to the P.)N'port of

the splitter Then connect another phone cable between a phone Cac! and the ADSL INport

of the splitter

5 %o connect the router to an +thernet line(connect the thernet cable between an# of four

thernet ports located on the bac! panel of the router and the thernet line

E +onnect the power cord to the power connector port on the bac! panel of the router" then

plug the power adapter into an electrical outlet or power strip7 Turn on the router b# pressing the )N/)FFbutton on its bac! panel

Turn on #our *+ and wait until #our operating s#stem is completel# loaded

E 't is recommended to use a US, extension cable to connect a US, modem to the router

Pae 15o! "3#


16/138


and Built-in Switch

User Manual


Obtaining IP Address Automatically in OS Windows P

4 +lic! the Start button and proceed to the Control !anel 8 &et.or9 and Internet

Connections 8 &et.or9 Connectionswindow

2 'n the &et.or9 Connectionswindow" right-clic! the rele(ant Local rea Connection

icon and select the !ro*ertiesline in the menu displa#ed

Figure 3. The Netork Connectionswindow.

Pae 1o! "3#


17/138


and Built-in Switch

User Manual


'n the Local rea Connection !ro*erties window" on the :eneral tab" select the

Internet !rotocol ;"C!I!< line +lic! the !ro*ertiesbutton

Figure 4. The !ocal Area Connection Propertieswindow.

Pae 17o! "3#


18/138


and Built-in Switch

User Manual


6 Select the '=tain an I! address auto)atically and '=tain D&S serer address

auto)aticallyradio buttons +lic! the '>button

Figure 5. The Internet Protocol "#CP$IP% Properties window.

5 +lic! the ?@button in the connection properties window

:ow #our computer is configured to obtain an '* address automaticall#

Pae 1o! "3#


19/138


and Built-in Switch

User Manual


Obtaining IP Address Automatically in OS Windows !

4 +lic! the Startbutton and proceed to the Control !anelwindow

2 Select the &et.or9 and S+arin, Center section %'f the +ontrol *anel has the categor#(iew %the Cate,ory (alue is selected from the /ie. =y drop-down list in the top right

corner of the window&" choose the /ie. net.or9 status and tas9s line under the

&et.or9 and Internet section&

Figure 6. The Control Panelwindow.

Pae 1o! "3#


20/138


and Built-in Switch

User Manual


'n the menu located on the left part of the window" select the C+an,e ada*ter settin,s

line

Figure 7. The Netork and S&aring Centerwindow.

Pae 20o! "3#


21/138


and Built-in Switch

User Manual


6 'n the opened window" right-clic! the rele(ant Local rea Connectionicon and select

the !ro*ertiesline in the menu displa#ed

Figure . The Netork Connectionswindow.

Pae 21o! "3#


22/138


and Built-in Switch

User Manual


5 'n the Local rea Connection !ro*erties window" on the &et.or9in,tab" select the

Internet !rotocol /ersion 4 ;"C!I!4


23/138


and Built-in Switch

User Manual


E Select the'=tain an I! address auto)atically and '=tain D&S serer address

auto)atically radio buttons +lic! the '>button

Figure 1". The Internet Protocol 'ersion ( "#CP$IPv(% Properties window.

7 +lic! the '>button in the connection properties window

:ow #our computer is configured to obtain an '* address automaticall#

Pae 23o! "3#


24/138


and Built-in Switch

User Manual


PC with Wi"Fi Adapter

4 %o connect &ia 3G net'ork( connect #our US, modem to the US, port7located on the bac!

panel of the router

!'f #ou need to connect or change a US, modem to another one when the router is powered

on" power off the de(ice" connect the modem to the US, port" and power on the router

2 %o connect the router to a )!* line(connect a phone cable between the DSL port of the

router and the ADSL )$Tport of the splitter +onnect #our phone to the P.)N'port of

the splitter Then connect another phone cable between a phone Cac! and the ADSL INport

of the splitter

%o connect the router to an +thernet line(connect the thernet cable between an# of four

thernet ports located on the bac! panel of the router and the thernet line

6 +onnect the power cord to the power connector port on the bac! panel of the router" then

plug the power adapter into an electrical outlet or power strip

5 Turn on the router b# pressing the )N/)FFbutton on its bac! panel

E Turn on 1i-i b# pressing the rele(ant button on the bac! panel of the router

7 Turn on #our *+ and wait until #our operating s#stem is completel# loaded

Turn on #our 1i-i adapter $s a rule" modern noteboo!s with built-in wireless :'+s are

euipped with a button or switch that turns on/off the wireless adapter %refer to #our *+documents& 'f #our *+ is euipped with a pluggable wireless :'+" install the software

pro(ided with #our 1i-i adapter

7 't is recommended to use a US, extension cable to connect a US, modem to the router

Pae 24o! "3#


25/138


and Built-in Switch

User Manual


Con#iguring Wi"Fi Adapter in OS Windows P

4 +lic! the Start button and proceed to the Control !anel 8 &et.or9 and Internet

Connections 8 &et.or9 Connectionswindow

2 Select the icon of the wireless networ! connection and ma!e sure that #our 1i-i adapter is

on

Figure 11. The Netork Connectionswindow.

Search for a(ailable wireless networ!s6 'n the opened ireless &et.or9 Connectionwindow" select the wireless networ! DS+

253and clic! the Connectbutton

$fter that the ireless &et.or9 Connection Statuswindow appears

!'f #ou perform initial configuration of the router (ia 1i-i connection" note that

immediatel# after changing the wireless default settings of the router #ou will need to

reconfigure the wireless connection using the newl# specified settings

Pae 25o! "3#


26/138


and Built-in Switch

User Manual


Con#iguring Wi"Fi Adapter in OS Windows !

4 +lic! the Startbutton and proceed to the Control !anelwindow

2 Select the &et.or9 and S+arin, Center section %'f the +ontrol *anel has the categor#(iew %the Cate,ory (alue is selected from the /ie. =ydrop-down list in the top right

corner of the window&" choose the /ie. net.or9 status and tas9s line under the

&et.or9 and Internet section&

Figure 12. The Control Panelwindow.

'n the menu located on the left part of the window" select the C+an,e ada*ter settin,s

line

6 'n the opened window" select the icon of the wireless networ! connection and ma!e sure that#our 1i-i adapter is on

5 To open the list of a(ailable wireless networ!s" select the icon of the wireless networ!

connection and clic! the Connect "o button or left-clic! the networ! icon in the

notification area located on the right side of the tas!bar

Figure 13. The noti#ication area o# the ta$k%ar.

Pae 2o! "3#


27/138


and Built-in Switch

User Manual


E 'n the opened window" in the list of a(ailable wireless networ!s" select the wireless networ!

DS+253and clic! the Connectbutton

Figure 14. The li$t o# availa%le network$.

7 1ait for about 20-0 seconds $fter the connection is established" the networ! icon will be

displa#ed as the signal le(el scale

!'f #ou perform initial configuration of the router (ia 1i-i connection" note that

immediatel# after changing the wireless default settings of the router #ou will need to

reconfigure the wireless connection using the newl# specified settings

Pae 27o! "3#


28/138


and Built-in Switch

User Manual


Connecting to )e+ased Interface

1hen #ou ha(e configured #our computer" #ou can access the web-based interface and configure

needed parameters %for example" create an interface to connect to the 'nternet" change theparameters of the wireless networ!" specif# the settings of the firewall" edit the password for the

administrator account" etc&

4 Start a web browser %see theBefore You Beginsection" page 46&

2 'n the address bar of the web browser" enter the '* address of the router %b# default" the

following '* address is specified8 12.16,.1.1& *ress the 'nter!e#

Figure 15. &onnecting to the we%'%a$ed inter#ace o# the (S)'275"* device.

Fn the opened page" enter the username %login& and password for the administrator account

%b# default" the following username and password are specified8 admin" admin& Then

clic! the #nterlin!

Figure 16. The login page.

!'f the error JThe page cannot be displayedK %or JUnable to display the pageK/J Could not

connect to remote serverK& occurs upon connecting to the web-based interface of the router"

ma!e sure that #ou ha(e properl# connected the router to #our computer

!or securit# reasons" it is strongl# recommended to change the administrator password

upon initial configuration of the router To do this" clic! the ConAi,ure )anually button

and proceed to the Syste) d)inistrator *ass.ordpage

Pae 2o! "3#


29/138


and Built-in Switch

User Manual


$fter successful registration the router)s uic! settings page opens

Figure 17. The +uick $etting$ page.

To configure connection to the 'nternet" clic! the Connect to internetbutton $fter clic!ing the

button" the 'nternet Setup 1i9ard opens %see theInternet !etup ,i-ardsection" page&

To configure access from the 'nternet to a web ser(er located in #our L$:" clic! the Host site

button $fter clic!ing the button" the Site Setup 1i9ard opens %see the !ite !etup ,i-ard section"

page 50&

To configure the router)s wireless networ!" clic! the ConAi,ure i-6ibutton $fter clic!ing the

button" the 1i-i Setup 1i9ard opens %see the ,i./i !etup ,i-ardsection" page 54&

To get bac! to the uic! settings page from an# 1i9ard or web-based interface menu section" left-

clic! the D-Lin! logo in the top left corner of the page

To configure all parameters of the router independentl# without the 1i9ards" clic! the ConAi,ure

)anuallybutton

Pae 2o! "3#


30/138


31/138


and Built-in Switch

User Manual


The web-based interface of the router is multilingual Select a needed language from the menu

displa#ed when the mouse pointer is o(er the Lan,ua,ecaption ;ou can change the language of

the web-based interface in an# menu item

Figure 1!. &hanging the language o# the we%'%a$ed inter#ace.

$fter selecting the language" the notification on unsa(ed changes will be displa#ed +lic! the Sae

button to sa(e the current language of the web-based interface as the default language

Pae 31o! "3#


32/138


and Built-in Switch

User Manual


Saving and ,estoring Settings

!:ote that #ou should regularl# sa(e the changes of the router)s settings to the non-

(olatile memor#

The router)s web-based interface displa#s the notification on unsa(ed changes at the top of the page

Figure 2". The noti#ication on un$aved change$.

;ou can sa(e the router)s settings (ia the top-page menu displa#ed when the mouse pointer is o(er

the Syste)caption

Figure 21. The top'page -enu.

+lic! the $e=ootline if #ou ha(e alread# sa(ed the router)s settings

+lic! the SaeB$e=ootline to sa(e new settings and immediatel# reboot the router

+lic! the Saeline to sa(e new settings to the non-(olatile memor# and continue configuring the

de(ice $lso #ou can sa(e the de(ice)s parameters (ia the Sae button on the Syste)

ConAi,urationpage

+lic! the ac9u*line and follow the dialog box appeared to sa(e the configuration %all settings of

the router& to #our *+ $lso #ou can sa(e the router)s configuration to #our *+ (ia the ac9u*

button on the Syste) ConAi,urationpage

+lic! the 6actoryline to restore the factor# default settings $lso #ou can restore the factor#

defaults (ia the 6actorybutton on the Syste) ConAi,urationpage

$lso #ou can restore the factor# default settings (ia the hardware 'S'Tbutton located on the

bottom panel of the router Use a small paperclip to acti(ate the button insert it into the hole %with

the de(ice turned on&" push" and hold for 40 seconds


33/138


and Built-in Switch

User Manual

ConAi,urin, ia e=-=ased InterAace

CH!"#$ 4% C'&6I:U$I&: /I #-S#D

I&"#$6C#

)i-ards

Internet Setup Wi$ard

To configure connection to the 'nternet" clic! the Connect to internetbutton

Figure 22. &on#iguring connection to the nternet.

To create a new 1$: connection" clic! the add ne. connectionlin!

Figure 23. The page #or $electing a 3/ network operator.

Fn the opened page" from the !roiderdrop-down list" select #our countr# and operator if #ou are

going to configure a . networ! connection" or lea(e the Manually(alue" if #ou are going to

configure a wired 1$: connection or #ou want to specif# all settings for #our . 1$: connection

independentl#

+lic! the &e(tbutton to continue

Pae 33o! "3#


34/138


and Built-in Switch

User Manual


Figure 24. The page #or $electing the connection t,pe.

Fn the opened page" select the needed choice of the radio button and clic! the &e(tbutton

Pae 34o! "3#


35/138


and Built-in Switch

User Manual


PPPo. or PPPoA Connection

Figure 25. &on#iguring 000o N connection.

'n the &a)efield" specif# a name for the connection for easier identification and clic! the &e(t

button


'n the /!Ifield" specif# the *' 'n the /CIfield" specif# the +'

rom the #nca*sulation Modedrop-down list" select a method of encapsulation

'n the Userna)efield" enter #our login" and in the !ass.ordand !ass.ord conAir)ation

fields M the password pro(ided b# #our 'S*

Pae 35o! "3#


36/138


and Built-in Switch

User Manual


'f authori9ation is not reuired" select the it+out aut+oriationchec!box

'f needed" specif# additional settings for #our ***o or ***o$ 1$: connection


!ara)eter Descri*tion

Serice na)eDisplayed for the PPPo.type only.

The name of the ***o authentication ser(er

ut+entication

al,orit+)

Select a reuired authentication method from the drop-down list or

lea(e the U"'(alue

M"U The maximum si9e of units transmitted b# the interface

Pae 3o! "3#


37/138


and Built-in Switch

User Manual



>ee* lie

Select the chec!box if #ou want the router to !eep #ou connected to

#our 'S* e(en when the connection has been inacti(e for a specified

period of time 1hen the chec!box is selected" the LC! interal

and LC! Aailsfields are a(ailable Specif# the reuired (alues

Dial on de)and

Select the chec!box if #ou want the router to establish connection to

the 'nternet on demand 'n the Ma(i)u) idle ti)efield" specif# a

period of inacti(it# %in seconds& after which the connection should

be terminated

!!! I! e(tensionThis option is used b# some 'S*s +ontact #our 'S* to clarif# if this

chec!box needs to be enabled

Use Static I! ddress

Select the chec!box if #ou want to use a static '* address to access

the 'nternet 'n the Static I! ddress field displa#ed when the

chec!box is selected" specif# a static '* address

!!! de=u,Select the chec!box if #ou want to log all data on *** connection

debugging

!!!o# *ass t+rou,+

Displayed for the PPPo.type only.

Select the chec!box if #ou want to allow ***o clients of

computers from #our L$: to connect to the 'nternet through this

***o connection of the router


'f needed" change the connection settings a(ailable in the Miscellaneoussection


Pae 37o! "3#


38/138


and Built-in Switch

User Manual



#na=le I:M! MulticastSelect the chec!box to allow multicast traffic from the external

networ! %eg (ideo streaming& to be recei(ed

&"Select the chec!box if #ou want one 1$: '* address to be used for

all computers of #our L$:

6ire.allSelect the chec!box to enable protection against $


39/138


and Built-in Switch

User Manual


IPoA or Static IP Connection

Figure 3". &on#iguring Static 0 N connection.


button

Figure 31. &on#iguring Static 0 N connection.



ill in the I! addressand &et)as9fields'n the :ate.ay I! address field" enter the '* address of the gatewa# used b# this 1$:

connection

Pae 3o! "3#


40/138


and Built-in Switch

User Manual




Figure 32. &on#iguring Static 0 N connection.








41/138


and Built-in Switch

User Manual



llo. to create seeral

connections assi,ned

to t+is *ort

Select the chec!box to allow the router to use se(eral untagged

connections

Use /L&Select the chec!box to allow the router to use tagged L$:

connections

/L& ID$n identifier for the L$: The field is displa#ed when the Use

/L&chec!box is selected

/L& *riority$ priorit# tag for the t#pe of traffic transmitted The field is

displa#ed when the Use /L&chec!box is selected


$fter that the page displa#ing all specified settings opens +lic! the Saebutton to create the

connection or the ac9button to specif# other settings

$fter clic!ing the Saebutton" the uic! settings page opens

Pae 41o! "3#


42/138


and Built-in Switch

User Manual


Dynamic IP Connection

Figure 34. &on#iguring (,na-ic 0 N connection.


button


'n the /!I" specif# the *' 'n the /CIfield" specif# the +'


'f #our 'S* has pro(ided its identifier" fill in the /endor ID field


Pae 42o! "3#


43/138


and Built-in Switch

User Manual











44/138


45/138


and Built-in Switch

User Manual


Bridge Connection

Figure 3. &on#iguring Bridge N connection.


button

Figure 3!. &on#iguring Bridge N connection.




Pae 45o! "3#


46/138


and Built-in Switch

User Manual


'f needed" change the connection settings a(ailable in the /L&section

Figure 4". &on#iguring Bridge N connection.




to t+is *ort

Select the chec!box to allow the router to use se(eral untagged

connections

Use /L&Select the chec!box to allow the router to use tagged L$:

connections

/L& ID

$n identifier for the L$: The field is displa#ed when the Use





$fter that the page displa#ing all specified settings opens +lic! the Saebutton to create the

connection or the ac9button to specif# other settings

$fter clic!ing the Saebutton" the uic! settings page opens

Pae 4o! "3#


47/138


48/138


and Built-in Switch

User Manual


'n the Modedrop-down list" lea(e the auto(alue in order to let the router connect automaticall# to

an a(ailable t#pe of networ!" or select a needed (alue from the drop-down list For !" U!#

modems only

'n the Userna)efield" enter #our login" and in the !ass.ordand !ass.ord conAir)ationfields M the password pro(ided b# #our . operator

'f authori9ation is not reuired" select the it+out aut+oriationchec!box

'n the !& field" enter the access point name" and in the Dial nu)=erfield" enter the number

dialed to connect to the authori9ation ser(er of the operator

'f needed" specif# additional settings for #our . 1$: connection


ut+entication

al,orit+)


lea(e the U"'(alue

M"U The maximum si9e of units transmitted b# the interface $ptional

>ee* lie


the networ! of #our operator e(en when the connection has been

inacti(e for a specified period of time 1hen the chec!box is

selected" the LC! interal and LC! Aails fields are a(ailable

Specif# the reuired (alues

Dial on de)and




be terminated

!!! de=u,Select the chec!box if #ou want to log all data on *** connection

debugging


Figure 43. &on#iguring 3/ N connection.

Pae 4o! "3#


49/138


50/138


and Built-in Switch

User Manual


Site Setup Wi$ard

To create a (irtual ser(er for redirecting incoming 'nternet traffic to a specified '* address in the

L$:" clic! the Host sitebutton

Figure 44. The page #or adding a virtual $erver.

Fn the opened page" #ou can specif# the following parameters8


&a)enter a name for the (irtual ser(er for easier identification ;ou can

specif# an# name

InterAaceSelect a 1$: connection to which this (irtual ser(er will be

assigned

!riate I!

nter the '* address of the ser(er from the local area networ! To

choose a de(ice connected to the router)s L$: at the moment" select

the rele(ant (alue from the drop-down list located to the right of the

!riate I! field %the field will be filled in automaticall#&

$e)ote I! nter the '* address of the ser(er from the external networ!

1hen needed settings are configured" clic! the Saebutton $fter that #ou get to the uic! settings

page

Pae 50o! "3#


51/138


and Built-in Switch

User Manual


Wi"Fi Setup Wi$ard

To specif# all needed settings for #our wireless networ!" clic! the ConAi,ure i-6ibutton

Figure 45. The page #or ena%lingdi$a%ling the wirele$$ )N.

Fn the opened page" in the Co))on settin,ssection" select the #na=le irelesschec!box %if

it was deselected before& to enable 1i-i connections


'n the asic settin,ssection" #ou can change the basic parameters of #our router)s 1L$:8

JhideK #our wireless networ! %Hide ccess !oint&" specif# a name for the networ! %SSID&"

select #our location %Country& and the wireless channel number %C+annel&" isolate users of #our

1L$: from each other %Clients Isolation&" and enable the guest part of #our 1L$: %#na=le

ireless :uest &et.or9& and change its name %:uest SSID&

Figure 46. Ba$ic $etting$ o# the wirele$$ )N.


Pae 51o! "3#


52/138


53/138


and Built-in Switch

User Manual


1hen the '*en(alue is selected" the #! #ncry*tion settin,ssection is displa#ed8

Figure 4. The 0penvalue i$ $elected #ro- the Netork Aut&enticationdrop'down li$t.


#na=le #ncry*tion #!

The chec!box acti(ating 1* encr#ption 1hen the chec!box is

selected" the #ncry*tion >ey #! ;1ey #! as H#chec!box are displa#ed

#ncry*tion >ey #!

as H#

Select the chec!box to set a hexadecimal number as a !e# for

encr#ption

#ncry*tion >ey #! ;1ey !S>$ !e# for 1*$ encr#ption The !e# can contain digits and/or Latin

characters

!2 !re-

aut+entication

The chec!box acti(ating preliminar# authentication %displa#ed onl#

for the !2-!S>authentication t#pe&

! #ncry*tion $n encr#ption method8 ">I!" #S" or ">I!E#S

! rene.al

The time period %in seconds&" at the end of which a new !e# for 1*$

encr#ption is generated 1hen the (alue is specified for this field"

the !e# is not renewed


1hen all the steps of configuring the 1L$: are completed" the specified settings are displa#ed on

the page +hec! their correctness and then clic! the Saebutton $fter that #ou get to the uic!

settings page

Pae 54o! "3#


55/138


and Built-in Switch

User Manual


Status

The pages of this section displa# data on the current state of the router8

networ! statistics

DSL connection status

acti(e 1$: connections

'* addresses leased b# the DH+* ser(er

the routing table

data on de(ices connected to the router)s networ! and its web-based interface

%etwork StatisticsFn the Status &et.or9 statisticspage" #ou can (iew statistics for all interfaces %connections&

existing in the s#stem or each connection the following data are displa#ed8 state" '* address"

subnet mas! and gatewa# %if the connection is established&" 3$+ address" 3TU (alue" and (olume

of data recei(ed and transmitted %with increase of the (olume the units of measurement are changed

automaticall#8 b#te" ?b#te" 3b#te" .b#te&

Figure 5". The Status $ Netork statisticspage.

Pae 55o! "3#


56/138


and Built-in Switch

User Manual


&S' Status

The information shown on the tabs of the Status DSL status page can be used for

troubleshooting and diagnosing connection problems

Figure 51. The Status $ DS! statuspage.

Pae 5o! "3#


57/138


and Built-in Switch

User Manual


WA% Status

The Status & statuspage displa#s acti(e 1$: connections

Figure 52. The Status $ )AN statuspage.

Pae 57o! "3#


58/138


and Built-in Switch

User Manual


&(CP

The Status DHC! page displa#s the information on computers that ha(e been identified b#

hostnames and 3$+ addresses and ha(e got '* addresses from the DH+* ser(er of the de(ice" aswell as the '* address expiration periods %the lease time&

Figure 53. The Status $ D3CPpage.

Pae 5o! "3#


59/138


and Built-in Switch

User Manual


)outing *able

The Status $outin, ta=le page displa#s the information on routes The table contains

destination '* addresses" gatewa#s" subnet mas!s" and other data

Figure 54. The Status $ ,outing talepage.

Pae 5o! "3#


60/138


and Built-in Switch

User Manual


'A% Clients

Fn the Status L& clientspage" #ou can (iew data on networ! de(ices connected to the router

The page displa#s de(ices connected to the wireless networ! of the router" de(ices connected to thebuilt-in switch of the router" and de(ices accessing the web-based interface of the router

Figure 55. The Status $ !AN clientspage.

or each de(ice the following data are displa#ed8 the '* address" the 3$+ address" and the

interface to which the de(ice is connected

Pae 0o! "3#


61/138


and Built-in Switch

User Manual


Net

'n this menu #ou can configure basic parameters of the router)s local area networ! and configure

connection to the 'nternet %a 1$: connection&

WA%

Fn the &et &page" #ou can create and edit connections used b# the router

Figure 56. The Net $ )ANpage.

To create a new connection" clic! the ddbutton Fn the page displa#ed" specif# the rele(ant

(alues

To edit an existing connection" left-clic! the rele(ant line in the table Fn the page displa#ed"

change the parameters and clic! the Saebutton

To delete an existing connection" left-clic! the rele(ant line in the table Fn the page displa#ed"

clic! the Deletebutton

To use one of existing 1$: connections as a default gatewa#" select the choice of the DeAault

,ate.ayradio button located in the line corresponding to this connection

See an example of creating se(eral connections in the Creating %'o Connections on ne Channel

section" page 45

Pae 1o! "3#


62/138


and Built-in Switch

User Manual


Creating ADS! )AN Connection

Figure 57. The page #or creating a new connection. The General settingsA#4and '!AN$ection$.

Pae 2o! "3#


63/138


64/138


and Built-in Switch

User Manual



sent in an effort to minimi9e lag or Citter caused b# traffic

inconsistencies 1hen #ou select this (alue from the drop-down list"

the !ea9 Cell $atefield is displa#ed Specif# a reuired (alue %in

cells per second&

C$

%Constant #it %ate&8 This ser(ice is used for applications that

reuire a constant data rate 't is mostl# used for transferring

uncompressed audio and (ideo" eg (ideoconferencing" interacti(e

audio %telephon#&" audio/(ideo distribution %tele(ision" distance

education" e-shops&" and retrie(al %(ideo-on demand" audio

libraries& 1hen #ou select this (alue from the drop-down list" the!ea9 Cell $ate field is displa#ed Specif# a reuired (alue %in

cells per second&

&on $ealti)e /$

%Non'%eal'time (ariable #it %ate&8 This ser(ice can be used for

transferring data that ha(e critical response-time reuirements" eg

air tic!et boo!ing" ban! transactions" and process monitoring 1hen

#ou select this (alue from the drop-down list" the !ea9 Cell $ate"

Sustaina=le Cell $ate" and Ma(i)u) urst Sie fields are

displa#ed Specif# reuired (alues

$ealti)e /$

%%eal'time (ariable #it %ate&8 This ser(ice is used for dela#-

sensiti(e applications such as real time (ideo The


65/138


and Built-in Switch

User Manual



/L& ID$n identifier for the L$: The field is displa#ed when the Use




The Miscellaneous section is displa#ed for all connection t#pes except for rid,e

Figure 5. The page #or creating a new connection. The 4iscellaneous $ection.


Miscellaneous







66/138


and Built-in Switch

User Manual


The !!! section is displa#ed for the !!!o#and !!!oconnection t#pes

Figure 5!. The page #or creating a new connection. The PPP$ection.


!!!

Userna)e $ username %login& to access the 'nternet

it+out aut+oriationSelect the chec!box if #ou don)t need to enter a username and

password to access the 'nternet

!ass.ord $ password to access the 'nternet

!ass.ord conAir)ation The confirmation of the entered password %to a(oid mist#pes&

Serice na)eDisplayed for the PPPo.type only.

The name of the ***o authentication ser(er

ut+entication

al,orit+)


lea(e the U"' (alue


>ee* lie





Pae o! "3#


67/138


and Built-in Switch

User Manual



Dial on de)and




be terminated







!!! de=u, Select the chec!box if #ou want to log all data on *** connectiondebugging

!!!o# *ass t+rou,+

Displayed for the PPPo.type only.




The I!section is displa#ed for the Static I!" Dyna)ic I!and I!oconnection t#pes

Figure 6". The page #or creating a new connection. The IP$ection.


I!

I! ddress Displayed for the Static IPand IPoAtypes only.nter an '* address for this 1$: connection

&et)as9Displayed for the Static IPand IPoAtypes only.

nter a subnet mas! for this 1$: connection

:ate.ay I! ddressDisplayed for the Static IPand IPoAtypes only.

nter an '* address of the gatewa# used b# this 1$: connection

/endor ID

Displayed for the Dynamic IPtype only.

The identifier of #our 'S* $ptional

1hen all needed settings are configured" clic! the Saebutton

Pae 7o! "3#


68/138


and Built-in Switch

User Manual


Creating .t&ernet )AN Connection

*rior to creating an thernet 1$: connection" specif# a L$: port that will be used as the 1$:

port %see theInterface Groupingsection" page A5&

Figure 61. The page #or creating a new connection. The General settings and .t&ernet$ection$.


:eneral settin,s

!roider Lea(e the Manually(alue

Connection "y*e

$ t#pe of networ! protocol to be used b# the connection $(ailable

(alues8

!!!o#

Static I!

Dyna)ic I!

rid,e

!ortSelect the (alue corresponding to the L$: port specified as the

1$: port

&a)e $ name for connection for easier identification

#na=le Select the chec!box to enable the connection

Direction The direction of this connection

#t+ernet


MC $ 3$+ address assigned to the interface

Pae o! "3#


69/138


and Built-in Switch

User Manual



/L&

%The section is displa#ed" if the /L& MU Modechoice of the #t+ernet & ty*eradiobutton is selected on the danced InterAace ,rou*in,page&



to t+is *ort

'f the chec!box is selected" the router is able to use se(eral untagged

connections

Use /L&'f the chec!box selected" the router is able to use tagged L$:

connections

/L& ID

$n identifier for the L$: The field is displa#ed when the Use




The Miscellaneous section is displa#ed for all connection t#pes except for rid,e

Figure 62. The page #or creating a new connection. The 4iscellaneous $ection.


Miscellaneous







70/138


and Built-in Switch

User Manual


The !!! section is displa#ed for the !!!o#connection t#pe

Figure 63. The page #or creating a new connection. The PPP $ection.


!!!

Userna)e $ username %login& to access the 'nternet

it+out aut+oriationSelect the chec!box if #ou don)t need to enter a username and

password to access the 'nternet

!ass.ord $ password to access the 'nternet


Serice na)e The name of the ***o authentication ser(er

ut+entication

al,orit+)


lea(e the U"' (alue


>ee* lie





Pae 70o! "3#


71/138


and Built-in Switch

User Manual



Dial on de)and




be terminated







!!! de=u, Select the chec!box if #ou want to log all data on *** connectiondebugging

!!!o# *ass t+rou,+




The I!section is displa#ed for the Static I! and Dyna)ic I!connection t#pes

Figure 64. The page #or creating a new connection. The IP $ection.


I!

I! ddressDisplayed for the Static IPtype only.

nter an '* address for this 1$: connection

&et)as9Displayed for the Static IPtype only.

nter a subnet mas! for this 1$: connection

:ate.ay I! ddressDisplayed for the Static IPtype only.

nter an '* address of the gatewa# used b# this 1$: connection

/endor IDDisplayed for the Dynamic IPtype only.

The identifier of #our 'S* $ptional


Pae 71o! "3#


72/138


and Built-in Switch

User Manual


Creating /G )AN Connection

'f the *': code chec! is enabled for the S'3 card inserted into #our US, modem" then prior to

creating a . 1$: connection" proceed to the US )ode)menu and enter the *': code on thepage displa#ed %see the "!B #ode$ section" page 445& Then proceed to the &et &page"

clic! the ddbutton" and select the 3:(alue from the Connection "y*edrop-down list

Figure 65. The page #or creating a new connection. The General settingsand /G$ection$.


:eneral settin,s

!roider

To automaticall# specif# all settings reuired to connect to the

'nternet" select #our countr# and operator from the drop-down list

To specif# all settings independentl#" lea(e the Manually(alue

!ort Select the us= (alue

&a)e $ name for connection for easier identification

#na=le Select the chec!box to enable the connection

Direction The direction of this connection

3:

Mode

The (alue of the field specifies the t#pe of the networ! to which the

router connects Lea(e the auto (alue to let the router connect

automaticall# to an a(ailable t#pe of networ!" or select a needed

(alue from the drop-down listFor !" U!# modems only

Pae 72o! "3#


73/138


and Built-in Switch

User Manual


Figure 66. The page #or creating a new connection. The PPP and4iscellaneous $ection$.


!!!

Userna)e $ username %login& to connect to the networ! of the operator

it+out aut+oriation Select the chec!box if #our operator does not reuire authori9ation

!ass.ord $ password to connect to the networ! of the operator


!& $n access point name

Dial nu)=er$ number dialed to connect to the authori9ation ser(er of the

operator

ut+entication

al,orit+)


lea(e the U"'(alue

M"U The maximum si9e of units transmitted b# the interface $ptional

Pae 73o! "3#


74/138


and Built-in Switch

User Manual



>ee* lie


the networ! of #our operator e(en when the connection has been

inacti(e for a specified period of time 1hen the chec!box is

selected" the LC! interal and LC! Aails fields are a(ailable

Specif# the reuired (alues

Dial on de)and




be terminated

!!! de=u,

Select the chec!box if #ou want to log all data on *** connection

debugging

Miscellaneous







75/138


76/138


and Built-in Switch

User Manual


To create a 3$+-'* pair" clic! the ddbutton and specif# the following parameters8


I! address $n '* address which will be assigned to the de(ice with thespecified 3$+ address

MC address The 3$+ address of the de(ice from the L$:

1hen all needed 3$+-'* pairs are specified" clic! the Saebutton

xisting 3$+-'* pairs are displa#ed in the table of the Static DHC!section To remo(e a pair"

select the rele(ant line in the table and clic! the $e)oebutton Then clic! the Saebutton

'n the DHC! serersection" #ou can configure the built-in DH+* se(er of the router


Mode

$n operating mode of the router)s DH+* ser(er

#na=le8 the router assigns '* addresses to clients automaticall# in

accordance with the specified parameters 1hen this (alue is

selected" the Start I!" #nd I!" and the Lease ti)e fields are

displa#ed on the page

Disa=le8 the router)s DH+* ser(er is disabled" clients) '* addresses

are assigned manuall#

$elay8 an external DH+* ser(er is used to assign '* addresses toclients 1hen this (alue is selected" the #(ternal DHC! serer I!

field is displa#ed on the page

Start I!The start '* address of the address pool used b# the DH+* ser(er to

distribute '* addresses to clients

#nd I!The end '* address of the address pool used b# the DH+* ser(er to

distribute '* addresses to clients

Lease ti)e

The lifetime of '* addresses leased b# the DH+* ser(er $t the end

of this period the leased '* address is re(o!ed and can be distributedto another de(ice" unless the pre(ious de(ice has confirmed the need

to !eep the address

#(ternal DHC! serer I!The '* address of the external DH+* ser(er which assigns '*

addresses to the router)s clients


Pae 7o! "3#


77/138


and Built-in Switch

User Manual


Watchdog

Fn the &et atc+do,page" #ou can enable the 1$: bac!up function" which pro(ides #ou with

uninterrupted access to the 'nternet 1hen #our main connection brea!s down" the router acti(atesthe bac!up connection and when the main channel is reco(ered" the router switches to it and

disconnects the reser(e one

Figure 6. The Net $ )atc&dogpage.

To acti(ate the bac!up function" on the &et &page" create the main 1$: connection and

enable it %select the #na=le chec!box on the page for creating the connection& Then create the

reser(e 1$: connection and disable it %deselect the #na=le chec!box on the page for creating the

connection& $fter that proceed to the &et atc+do,page" select the #na=le chec!box and

specif# the needed (alues in the fields displa#ed on the page


"i)e Aro) t+e

=e,innin, oA t+eal,orit+) =eAore t+e

Airst decision

$ time period %in seconds& during which the router)s internal s#stem

anal#9es the main connection and ma!es a decision to enable/disable

the reser(e channel ,# default" the (alue 6 is specified

!ri)ary connection settin,s

Connection na)erom the drop-down list" select a 1$: connection which will be

used as the main one

Connection Guality leel

The minimum ualit# of the main connection when the router

considers the connection as acti(e *ossible (alues are from to

255 ,# default" the (alue %2 is specified

Pae 77o! "3#


78/138


and Built-in Switch

User Manual



I! address Aor c+ec9s$n '* address that the router will chec! for a(ailabilit# (ia '+3*

ping mechanism

"i)eout =et.een

connect atte)*ts

$ time period %in seconds& between attempts to establish the main

connection ,# default" the (alue 1 is specified

"i)e to try to connect$ time period %in seconds& for an attempt to establish the main


"i)eout Aor

disconnection

$ time period %in seconds& for an attempt to brea! the main

connection ,# default" the (alue is specified

$esere connection settin,s

Connection na)erom the drop-down list" select a 1$: connection which will be

used as the reser(e one

Connection Guality leel

The minimum ualit# of the reser(e connection when the router

considers the connection as acti(e *ossible (alues are from to

255 ,# default" the (alue %2 is specified

I! address Aor c+ec9s$n '* address that the router will chec! for a(ailabilit# (ia '+3*

ping mechanism

"i)eout =et.eenconnect atte)*ts

$ time period %in seconds& between attempts to establish the reser(econnection ,# default" the (alue 1 is specified

"i)e to try to connect$ time period %in seconds& for an attempt to establish the reser(e


"i)eout Aor

disconnection

$ time period %in seconds& for an attempt to brea! the reser(e

connection ,# default" the (alue is specified

1hen all needed settings are configured" clic! the C+an,ebutton

Pae 7o! "3#


79/138


and Built-in Switch

User Manual


)i+5i

'n this menu #ou can specif# all needed settings for #our wireless networ!

Common settings

Fn the i-6i Co))on settin,s page" #ou can enable #our wireless local area networ!

%1L$:&

Figure 6!. The page #or ena%lingdi$a%ling the wirele$$ )N.

The #na=le irelesschec!box enables 1i-i connections ,# default" the chec!box is selected

'f #ou want to disable #our 1L$:" deselect the #na=le ireless chec!box and clic! the

C+an,ebutton

Pae 7o! "3#


80/138


and Built-in Switch

User Manual


Basic Settings

Fn the i-6i asic settin,spage" #ou can configure basic parameters of the router)s 1L$:

Figure 7". Ba$ic $etting$ o# the wirele$$ )N.


Hide ccess !oint

'f the chec!box is selected" other users cannot see #our 1i-i

networ! %'t is recommended not to select this chec!box in order to

simplif# initial configuration of #our 1L$:&

SSID

$ name for the 1L$: ,# default" the (alue DS+253 is

specified 't is recommended to specif# another name for the

networ! upon initial configuration %use digits and Latin characters&

SSIDThe parameter that uniuel# identifies #our wireless networ! ;ou

cannot change the (alue of this parameter

Country The countr# #ou are in Select a (alue from the drop-down list

C+annel

The wireless channel number ,# default" channel E is specified 'f

#ou want to use another channel" select a (alue from the drop-down

list 1hen the auto(alue is selected" the router itself chooses the

channel with the least interference

Clients IsolationSelect the chec!box to isolate the users of #our 1L$: %to forbid

wireless clients to communicate to each other&

#na=le ireless :uest

&et.or9

Select the chec!box to create a separate part of #our 1L$: with

open authentication t#pe and with no password 1ireless de(ices

connected to this networ! can access the 'nternet" but are isolated

from the router)s L$:

:uest SSID $ name for the guest part of #our 1L$:

1hen #ou ha(e configured the parameters" clic! the C+an,ebutton

Pae 0o! "3#


81/138


and Built-in Switch

User Manual


Security Settings

Fn the i-6i Security settin,spage" #ou can modif# securit# settings of the 1L$:

Figure 71. The de#ault $ecurit, $etting$.

,# default" the '*ennetwor! authentication t#pe with no encr#ption is specified for the 1L$:

!The default securit# settings do not pro(ide sufficient protection for the 1L$: *lease"

specif# #our own securit# settings

The router supports the following authentication t#pes8

ut+entication ty*e Descri*tion

'*en Fpen authentication %with or without 1* encr#ption&

!-!S> 1*$-based authentication using a *S?

!2-!S> 1*$2-based authentication using a *S?

Pae 1o! "3#


82/138


and Built-in Switch

User Manual


1hen the '*en (alue is selected" the #! #ncry*tion settin,ssection is displa#ed8

Figure 72. The 0penvalue i$ $elected #ro- the Netork Aut&enticationdrop'down li$t.


#na=le #ncry*tion #!The chec!box acti(ating 1* encr#ption 1hen the chec!box isselected" the #ncry*tion >ey #! ;1ey #! as H#chec!box are displa#ed

#ncry*tion >ey #!

as H#

Select the chec!box to set a hexadecimal number as a !e# for

encr#ption

#ncry*tion >ey #! ;1ey !S>$ !e# for 1*$ encr#ption The !e# can contain digits and/or Latin

characters

!2 !re-

aut+entication

The chec!box acti(ating preliminar# authentication %displa#ed onl#

for the !2-!S>authentication t#pe&

! #ncry*tion $n encr#ption method8 ">I!" #S" or ">I!E#S

! rene.al

The time period %in seconds&" at the end of which a new !e# for

1*$ encr#ption is generated 1hen the (alue is specified for thisfield" the !e# is not renewed

1hen #ou ha(e configured the parameters" clic! the C+an,ebutton

Pae 3o! "3#


84/138


85/138


and Built-in Switch

User Manual


To add a 3$+ address to which the selected filtering mode will be applied" proceed to the MC

addressestab

Figure 75. The ta% #or adding a & addre$$.

nter an address in the MC addressfield of the MC address addin,section" and clic! the

ddbutton

To add the 3$+ address of a de(ice connected to the router)s L$: at the moment" select the (alue

containing the 3$+ and '* address of this de(ice from the drop-down list located to the right of the

MC address field %the field will be filled in automaticall#& and clic! the ddbutton

To remo(e a 3$+ address from the list of 3$+ addresses" select the chec!box located to the right

of the rele(ant 3$+ address in the 3$+ address list section and clic! the Deletebutton

Pae 5o! "3#


86/138


and Built-in Switch

User Manual


Station 'ist

Fn the i-6i Station Listpage" #ou can (iew the list of wireless de(ices connected to the router

Figure 76. The li$t o# the router$ wirele$$ client$.

To (iew the latest data on the de(ices connected to the 1L$:" clic! the $eAres+button

Pae o! "3#


87/138


88/138


and Built-in Switch

User Manual


To acti(ate the 1*S function" select the !S #na=lechec!box and clic! the C+an,ebutton

1hen the chec!box is selected" the InAor)ation and Connectionsections are a(ailable on the

page


!S Status

The state of the 1*S function8

ConAi,ured%all needed settings are specified&

UnconAi,ured%#ou need to specif# the rele(ant settings&

SSID The name of the router)s 1L$:

&et.or9 ut+entication The networ! authentication t#pe specified for the 1L$:

#ncry*tion The encr#ption t#pe specified for the 1L$:

Deice !I&The *': code of the router This parameter is used when connecting

the router to a registrar to set the parameters of the 1*S function

Client !I&The *': code of the de(ice newl# connected to the router (ia the

1*S function

!S Met+od

$ method of the 1*S function Select a (alue from the drop-down

list

!I&8 +onnecting the de(ice (ia the *': code

!C8 +onnecting the de(ice (ia the push button %actual or (irtual&

!I& Code

The *': code of the 1*S-enabled de(ice that needs to be connected

to the wireless networ! of the router

The field is displa#ed onl# when the !I&(alue is selected from the

!S Met+oddrop-down list

Connect+lic! the button to connect the wireless de(ice to the router)s 1L$:

(ia the 1*S function

Pae o! "3#


89/138


and Built-in Switch

User Manual


6sing )PS 5unction via )e+ased Interface

To add a wireless de(ice (ia the *': method of the 1*S function" follow the next steps8

4 Select the !S#na=le chec!box

2 +lic! the C+an,ebutton

Select the !I&(alue from the !SMet+oddrop-down list

6 Select the *': method in the software of the wireless de(ice that #ou want to connect to the

router)s 1L$:

5 +lic! the rele(ant button in the software of the wireless de(ice that #ou want to connect to

the 1L$:

E

8/11/2019 DSL-2750UC1_User M

dsl-2750uc1_user manual_v.1.0.11_06.07.12_en

Documents