DSE8610SYNCHRONISING AUTO START LOAD SHARE CONTROL MODULE

DSEGenset

®

The DSE8610 is an easy to useSynchronising Auto Start ControlModule suitable for use in a multi-generator loadshare system,designed to synchronise up to 32generators including electronic andnon-electronic engines.

The DSE8610 monitors thegenerator and indicates operationalstatus and fault conditions,automatically starting or stoppingthe engine on load demand or faultcondition.

System alarms are annunciated onthe LCD screen (multiple languageoptions available), illuminated LEDand audible sounder.

The event log will record 250 eventsto facilitate easy maintenance. Anextensive number of fixed andflexible monitoring, metering andprotection features are included as well as comprehensivecommunication and systemexpansion options.

Using the DSE PC ConfigurationSuite Software allows easyalteration of the operationalsequences, timers and alarms. Withall communication ports capable ofbeing active at the same time, theDSE8610 is ideal for a wide varietyof demanding load shareapplications.

KEY LOAD SHARE FEATURES:• Peak lopping/sharing (withDSExx60)

• Sequential set start• Manual voltage/frequencyadjustment

• R.O.C.O.F. and vector shiftprotection

• Generator load demand• Automatic hours run balancing• Mains (Utility) de-coupling• Mains (Utility) de-couplingtest mode

• Dead bus sensing• Bus failure detection• Direct governor and AVR control• Volts and frequency matching• kW and kV Ar load sharing• Dead bus synchronising

FEATURES

ENVIRONMENTAL TESTING STANDARDS

ELECTRO MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for theIndustrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for theIndustrial Environment

ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment,including Electrical Business Equipment

TEMPERATUREBS EN 60068Ab/Ae Cold Test -30oCBS EN 60068-2-2Bb/Be Dry Heat +70oC

VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn

HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55oC @ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40oC @ 93% RH 48 Hours

SHOCKBS EN 60068-2-27Three shocks in each of three major axes15gn in 11mS

DEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP65 - Front of module when installed into thecontrol panel with the supplied sealing gasket.

COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETYOF LOAD SHARE APPLICATIONS

1ph2ph3phN

DSE2130

DSE2131

DSE2133

DSE2152

DSE2157

DSE2548

2 1ph2ph3phE

1ph2ph3phN

RS232 ANDRS485

DSENET®EXPANSION

USBPORT

USBHOST

CONFIGURABLEINPUTS

DC OUTPUTS ANALOGUESENDERS

EMERGENCY STOP

DC POWER SUPPLY 8-35V

DSE86107

OTHER

D+W/L

ETHERNET

11

232 485

6 4

PCMODBUSMODEM

BUSSENSING

VOLT FREEOUTPUTS

GENERATOR SENSING CHARGEALTERNATOR

ELECTRONIC ENGINES

MAGNETICPICK-UP

VOLTSCURRENT

+

+

ISSUE 3

MSC

55xx 75xx 8xxx

DEUTZISUZUPERKINSCATERPILLARMTUVOLVOCUMMINSSCANIA

FUEL & STARTOUTPUTS

CALL US TODAY 1-888-POWER-58

REQUEST A QUOTE parts@genpowerusa.com

SHOP ONLINE www.genpowerusa.com

055-083/03/12 (9) USRegistered in England & Wales No.01319649VAT No.316923457

Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.

RELATED MATERIALSTITLE PART NO’SDSE8610 Installation Instructions 053-069DSE8610 Operator Manual 057-115DSE8600 PC Configuration Suite Manual 057-119DSE8660 Date Sheet 055-086

®

DSEGenset

FEATURES

SPECIFICATION

DC SUPPLYCONTINUOUS VOLTAGE RATING8 V to 35 V continuous

CRANKING DROPOUTSAble to survive 0 V for 50 mS, providing supply was at least 10 V before dropoutand supply recovers to 5 V. This is achieved without the need for internal batteries

MAXIMUM OPERATING CURRENT460 mA at 12 V, 245 mA at 24 V

MAXIMUM STANDBY CURRENT375 mA at 12 V, 200 mA at 24 V

CHARGE FAIL/EXCITATION RANGE0 V to 35 V

OUTPUTSOUTPUT A (FUEL)15 A DC at supply voltage

OUTPUT B (START)15 A DC at supply voltage

OUTPUTS C & D8 A AC at 250 V AC (Volt free)

AUXILIARY OUTPUTS E,F,G,H,I & J2 A DC at supply voltage

GENERATOR & BUSVOLTAGE RANGE 15 V to 333 V AC (L-N)

FREQUENCY RANGE3.5 Hz to 75 Hz

MAGNETIC PICK-UPVOLTAGE RANGE+/- 0.5 V to 70 V

FREQUENCY RANGE10,000 Hz (max)

BUILT-IN GOVERNOR CONTROLMINIMUM LOAD IMPEDANCE 1000ΩFully isolated

GAIN VOLTAGE0 V to 10 V DCFully isolated

OFFSET VOLTAGE+/- 10 V DCFully isolated

BUILT-IN AVR CONTROLMINIMUM LOAD IMPEDANCE1000ΩFully isolated

GAIN VOLTAGE0 V to 10 V DCFully isolated

OFFSET VOLTAGE+/- 10 V DCFully isolated

DIMENSIONSOVERALL240 mm x 181 mm x 42 mm9.4” x 6.8” x 1.6”

PANEL CUTOUT220 mm x 160 mm8.7” x 6.3”

MAXIMUM PANEL THICKNESS8 mm0.3”

OPERATING TEMPERATURE RANGE-30 oC to +70 oC

STORAGE TEMPERATURE RANGE-40 oC to +85 oC

DSE8610SYNCHRONISING AUTO START LOAD SHARE CONTROL MODULE

KEY FEATURES• Comprehensive synchronising &loadsharing capabilities

• Built-in governor and AVR control• Base load (kW export)functionality

• Positive & negative kVAr exportcontrol

• Mains (utility) de-couplingprotection

• Generator power (kW, kV Ar, kV A& pf) monitoring

• Overload (kW & kV Ar) protection• Reverse power (kW & kV Ar)protection

• Unbalanced load protection• Independent earth fault protection• Advanced integral PLC editor• 11 Configurable inputs• 8 Configurable outputs• Configurable flexible sensor inputs• DSENet® expansion compatibility• User configurable RS232, RS485and Ethernet communications

• Remote SCADA monitoring viavarious DSE software applications

• MODBUS RTU & TCP support• User configurable MODBUSpages

• Advanced SMS control and faultmessaging (additional GSMmodem required)

• Easy access diagnostic pagesincluding modem diagnostic pages

• Data logging and trending

• CAN, MPU and Frequency speedsensing

• Tier 4 CAN engine support• “Protections disabled” feature• Front panel editing with PINprotection

• Fully configurable using DSEConfiguration Suite PC softwarevia USB

• 4 Line back-lit LCD text display• LED and LCD alarm indication• Configurable display languages• USB connectivity• Customisable status screens• Five key menu navigation• 3 Configurable maintenancealarms

• Multiple date and time runscheduler

• Manual fuel pump control• Fuel usage monitor and low fuellevel protection

• Charge alternator failureprotection

• Load switching (load sheddingand dummy load control)

• Configurable event log (250)• Backed up real time clock

KEY BENEFITS• Compatible in load share systemscontaining DSE5500, DSE7500and DSE8600 series. Contact DSEfor further details

• 132 x 64 pixel ratio display forclarity

• Real-time clock provides accurateevent logging

• Ethernet communication, providesbuilit in advanced remotemonitoring.

• Can be integrated into buildingmanagement systems (BMS) andprogrammable logic control (PLC)

• Increased input and outputexpansion capability via DSENet®

• Licence-free PC software • IP65 rating (with supplied gasket)offers increased resistance to wateringress

• Advanced Internal PLC editor allowsuser configurable functions to meetspecific application requirements.

EXPANSION DEVICES• DSE124 CAN/MSC Extender• DSE2130 Input Expansion Module• DSE2131 Ratio-metric Input Expansion

Module• DSE2133 RTD & Thermo-couple

Expansion Module• DSE2152 Ratio-metric Output

Expansion Module• DSE2157 Output Expansion Module• DSE2548 LED Expansion Module

CALL US TODAY 1-888-POWER-58

REQUEST A QUOTE parts@genpowerusa.com

SHOP ONLINE www.genpowerusa.com