dse 710-720
TRANSCRIPT
![Page 1: DSE 710-720](https://reader035.vdocuments.us/reader035/viewer/2022071700/5477c0585806b524198b4649/html5/thumbnails/1.jpg)
®DSEULTRA®
STARTINGWITHQUALITY.
SPECIFICATION
ENVIRONMENTAL TESTINGSTANDARDS
The DSE710 is an AutomaticStart Control Module that offersan advanced range of enginemonitoring and protectionfeatures. The module has beendesigned to monitor generatorfrequency, generator volts,generator current, engine oilpressure, engine coolanttemperature, engine runninghours and battery volts.
The module also displays theengine speed. When the moduledetects a fault condition itautomatically shuts down theengine and indicates the exactfault on the modules LCD displayor relevant LED indicator.
The module can be configuredusing the front panel or via theDSE810 interface and a PC. Themodule can also be controlledfrom a PC that is located up to100 meters away.
The DSE720 is an AutomaticMains Failure Control Moduleand incorporates all the featuresof the DSE710 plus the ability toautomatically monitor the mainssupply and switch over to thegenerator when the mainspower fails.
FEATURES• PC configurable• Digital and analogue inputs• Digital outputs• Automatic mains (utility) supplymonitoring (DSE720 only)
• Automatic shutdown or warningwhen fault conditions are detected
• Manual start• Engine pre-heat• Engine monitoring and protectionfeatures
• Protected Solid State (PSS)outputs
• Front panel mounting• Front panel programming• Tamper proof engine hourscounter
• Remote start• LED indicators• Configurable timers• Configurable outputs• Configurable inputs• Back-lit character/icon LCDdisplay
BENEFITS• Transfer between mains (utility)and generator power (DSE720only)
• On-site module configuration andremote configuration (Max 100Meters) using PC software
• User-friendly set-up and buttonlayout
• Multiple engine parameters aremonitored simultaneously
• License free PC software
OPERATIONThe module is operated usingthe front STOP/RESET, MANUAL,AUTO, TEST and START pushbuttons.
An additional push button next tothe LCD display is used to scrollthrough the modules’ meteringdisplays.
CONFIGURATIONThe modules can be configured usingthe front panel or remotely using theDSE810 interface and a PC.
As well as configuration the DSE810interface has the ability to providereal time diagnostic facilities.
ELECTRO MAGNETIC CAPABILITYBS EN 61000-6-2EMC Generic Emission Standard for theIndustrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for theIndustrial Environment
ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment,including Electrical Business Equipment
TEMPERATUREBS EN 60068-2-2Test Ab to +70oC 60067-2-2 HotTest Ab to -30oC 60068-2-1 Cold
VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
HUMIDITYBS 2011 part 2.1 60068-2-30Test Cb Ob Cyclic93% RH @ 40oC for 48 hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes15gn in 11mS
DC SUPPLY8V to 35V continuous
CRANKING DROPOUTSAble to survive 0V for 50mS, providing supplywas at least 10V before dropout and supplyrecovers to 5V. This is achieved without theneed for internal batteries.
MAXIMUM OPERATING CURRENT180mA at 12V. 190mA at 24V
MAXIMUM STANDBY CURRENT145mA at 12V. 150mA at 24V
GENERATOR INPUT RANGE35V(L-N) to 333V AC (L-N) absolute maximum50Hz - 60Hz (min 15V AC)
AUXILIARY OUTPUTSSolid state2.4A DC at supply voltage
FUEL/START OUTPUTSSolid state3.4A DC at supply voltage
GENERATOR C.T.5A secondary 0.5VA
MAINS (UTILITY) SENSING INPUTRANGE (DSE720 only)35V(L-N) to 333V AC (L-N)50Hz - 60Hz (min 15V AC)
DSE710 & DSE720 DIMENSIONS209mm x 146mm x 30.3mm8.2” x 5.7” x 1.2”
DSE710 & DSE720 PANEL CUTOUT:182mm x 137mm7.2” x 5.4”
MAXIMUM PANEL THICKNESS8mm0.3”
DSE710 & DSE720AUTO START & AUTO MAINS FAILURE CONTROL MODULES
DSE710 DSE720
![Page 2: DSE 710-720](https://reader035.vdocuments.us/reader035/viewer/2022071700/5477c0585806b524198b4649/html5/thumbnails/2.jpg)
®
DSE710 & DSE720
RELATED MATERIALSTITLE PART NO’SDSE710 Manual 053-013DSE720 Manual 053-005DSE7xx Software Manual 057-002
DEEP SEA ELECTRONICS INC3230 Williams AvenueRockfordIL 61101-2668 USA
TELEPHONE+1 (815) 316 8706
FACSIMILE+1 (815) 316 8708
WEBSITEwww.deepseausa.com
DEEP SEA ELECTRONICS PLCHighfield HouseHunmanby Industrial EstateHunmanby, North YorkshireYO14 0PH England
TELEPHONE+44 (0)1723 890099
FACSIMILE+44 (0)1723 893303
WEBSITEwww.deepseaplc.com
Registered in England & Wales No.01319649 VAT No.316923457
DEEP SEA ELECTRONICS PLC maintains a policy of continuous development and reserves the right tochange the details shown on this data sheet without prior notice. The contents are intended for guidance only.
055-035/02/08 (2)
This data sheet is printed on 9lives 55 Silk, which is produced with 55% recycled fibrefrom both pre and post-consumer sources, together with 45% virgin ECF fibre.
2 AMPFUSES
2 AMPFUSES
G
ELECTRICAL INTERLOCK
LOAD
MECHANICAL LOAD
L1
L3
N
L2
L1
L3
N
L2
M
18 19 20 21 26 27 9 8 22 23 24 25
1 2 3 4 5 6 7 10 11 12 13 15 16 14 17
L1 L2 L3 COM L1 N
GEN VOLTS
L1 L2 L3 N
MAINS
NORMALLY OPEN NORMALLY CLOSED
+ +
FUELSOLENOID
2 AMPFUSE
2 AMPFUSE
BATTERYCRANK
SOLENOID RELAY RELAY CHARGEALT
WL
TO
EN
GIN
EE
AR
TH
BATTERY
-VE
+V
E
EM
ST
OP
FUE
L
CR
AN
K
OU
TP
UT
1
OU
TP
UT
2
CH
RG
ALT
OIL
PR
ES
SU
RE
CO
OLA
NT
TE
MP
INP
UT
1
INP
UT
2
RE
MO
TE
ST
AR
TCLO
SE
MA
INS
CLO
SE
GE
N
BATTERY NEGATIVE MUST BE GROUNDEDSCREW TERMINALS TIGHTENING TORQUE = 0.8Nm (7lb-in)
* NOTE. ALL THE OUTPUTS ARE SOLID STATE AND ARE POSITIVE SWITCHING
CTs MUST BE 5 AMPSECONDARY
P1 P2
S1 S2
MODULE 710/720
DSE720 ONLY
FROMMAINS
FROMGENERATOR
DSE710/DSE720
Generator Frequency
Engine Speed
Generator Volts (L1-N, L2-N, L3-N)
Generator Volts (L1-L2, L2-L3, L3-L1)
Generator Current (L1, L2, L3)
Engine Oil Pressure
Engine Coolant Temperature
Hours Run Counter
Battery Volts
Mains Volts (DSE720 only)
(L1-N, L2-N, L3-N)
INSTRUMENTATION ANDALARMSThe DSE710 and DSE720 bothprovide comprehensive meteringand alarm facilities.
The table below outlines themodule’s capabilities.