(732) 938-2000 / 800-LAB-VOLT, FAX: (732) 774-8573, E-MAIL: us@labvolt.com(418) 849-1000 / 800-LAB-VOLT, FAX: (418) 849-1666, E-MAIL: ca@labvolt.com

INTERNET: http://www.labvolt.com

AAutomation and Robotics CNC MILL SYSTEM

MODEL 5600

GENERAL DESCRIPTIONThe CNC Mill System, model 5600, provides training incomputer-aided manufacturing (CAM) with an industrial-grade microprocessor-driven CNC mill. The systemallows students to practice computer numerical controlled(CNC) code programming and editing, learn to operatemill components, controls, and tools, set a programmedreference zero, follow the steps necessary to machine apart to programmed specifications, and apply the machinecode language to current mill technology.

The CNC Mill can machine pieces of soft materialssuch as plastic and wax, as well as harder materials suchas aluminum, mild steel, and brass. It consists of a millingtable, a headstock carrying the spindle motor, and a cast-iron vertical column with dovetail slide. The CNC mill ismounted on a solid steel chassis and is equipped withR8 tooling. The stock to be milled is secured in a vise that

holds it to the milling table. Two ball screws, each drivenby a stepper motor, are used to move the table along theX axis (left and right) and Y axis (backward and forward)to feed the stock through the periphery of the end mill. Athird ball screw, also driven by a stepper motor, is usedto move the headstock along the Z axis (up and down)for positioning the end mill. The speed of each steppermotor can be programmed separately for feed rates upto 508 mm/min (20 in/min). A 746-W (1.0-hp) DC motorrotates the spindle at speeds programmable up to3400 rpm. The end mill can be changed to accommodatedifferent stock materials and milling designs.

CNC MILL SYSTEMMODEL 5600

2

TABLE OF CONTENTSGeneral Description . . . . . . . . . . . . . . . . . . . . . . . . . 1CNC Mill Software . . . . . . . . . . . . . . . . . . . . . . . . . . 3Optional Pneumatic Vise . . . . . . . . . . . . . . . . . . . . . 3Table of Contents of the User Guides . . . . . . . . . . . 4List of Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . 5Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Ordering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 9

A computer (not included) is used to create NC partprograms with G and M machine codes or their conversa-tional code equivalents. The created programs are down-loaded to the on-board microprocessor of the CNC mill,which stores and executes them. Since the CNC millconnects directly to the serial or Ethernet port of a com-puter, or directly to a network, no additional interface cardis required. The computer is free to be used for anyadditional applications, since it is not dedicated to thecontrol of the mill.

The CNC mill is designed for use with the includedLab-Volt CNC Mill Software, Model 5660. This Windows-based software permits creation of G and M code partprograms for download to the CNC mill. It features toolpath emulation, which allows students to set up the toolpaths and the cut steps, and create a part program tosimulate tool motion on a monitor in order to verify NCcodes and the finished part prior to the actual cutting.Canned cycles can be programmed. The software canimport NC part programs created with otherCAM programs that support G and M codes.

The CNC mill features a control panel that permits themill to be operated manually. This panel includes amultiple-line LCD display, an easy-to-use membranekeypad, an error indicator/pause button, and a key-re-leased emergency stop push-button. The mill parameters,including the spindle speed, the feed rate, the referencepoint, and the X, Y, and Z axes coordinates can be setby accessing different menus. During the machining, thecontrol panel displays the X, Y, and Z axes coordinates,as well as the current feed and spindle speed.

The CNC mill is designed for maximum safety. Safetydoors provide protection during machining. Magneticinterlocks located on the doors stop the spindle and theaxes if a door is opened during machining. Limit switchesprevent over-travel of the mill's spindle and table. Press-ing the emergency stop push-button on the control panelcuts off the power to the spindle motor and stops theaxes.

The CNC mill supports low-voltage communicationswith robotic units to permit students to create automatedwork cells, ideal for implementing computer-integratedmanufacturing (CIM). For this purpose, the CNC millfeatures a 15-pin TTL/IO port providing four 5-V digitalinput and four 5-V digital output lines forTTL communication to an automation work cell. This portcan be connected to the Lab-Volt Servo-Robot, Model5250, offered as an option to achieve automatic loadingand unloading of the stock with a robot arm. The CNC millalso features a 5-pin solenoid driver port providing con-nections for up to four auxiliary devices. This port can beconnected, for example, to the pneumatic control box ofthe optional Pneumatic Vise, Model 5616, to achieveautomatic clamping and unclamping of the stock loadedin the CNC mill. The TTL/IO and solenoid driver ports ofthe CNC mill are M-code supported through the CNC MillSoftware, Model 5660.

The CNC Mill System comes with the accessories,software, and cables required for system operation.These include, among others, a vise, a basic milling kit,100 blocks of industrial machinable wax, a serial cable,a cross-over Ethernet cable, and a copy of the CNC MillSoftware, Model 5660.

Also included are two user guides. One user guidegives students experience with equipment designed toprepare them for the automated manufacturing environ-ment. A user guide for the CNC Mill Software,Model 5660, is also included. It provides documentationdescribing the features of the CNC Mill Software.

To enhance or expand the capabilities of the system,an assortment of milling tools and stock materials ofdifferent sizes are offered as option.

Mill FeaturesC On-board microprocessorC Full manual control modeC Feed rate overrideC Spindle speed override

Control Panel Features C Main power LED indicatorC 20-character by four-line LCD displayC 12-key membrane keypadC Manual mode controls for:

X, Y, and Z axes coordinates Feed rate Spindle speed Units used (millimeters or inches) TTL I/O and solenoid outputs

3C During execution, display of: X, Y, and Z positions Feed Rate Spindle Speed Current G and M code TTL I/O and Solenoid Output Status Tool Change

Safety FeaturesC Enclosed bed and work areaC Key-released emergency stop push-buttonC Error indicator/pause buttonC Switches monitored by the machine for:

safety door open over-travel protection on all axes

C Ability to restart programs from stopping point afteroperator abort or safety interruption has been cor-rected.

CNC MILL SOFTWAREThis Windows-based 32-bit software runs underWindows XP and Vista. It features a parametric-basedgraphical tool editor, a 3D Tool Path Emulator, and aneasy-to-use graphical interface. The software can importNC part programs created with other CAM programs thatsupport the G and M codes.

FeaturesC Provides G and M code programmingC Editor printout of part programC Part program error-checking using a syntax parserC Fast syntax verification with line highlighting to speed

part program debuggingC Parametric, graphical view tool editor with support for

20 toolsC Full G and M code help with graphical display and

example codeC Serial and Ethernet download support for the Lab-Volt

Automation CNC mills, Models 5400 and 5600C Full 3D Tool Path Emulator with wireframe user-defined

3D perspective featuring: Top, front, side, and oblique standard views Part rotation and camera positioning for better emula-

tion viewing Zoom in/zoom out capability Tool radius display during emulation Editor line highlighting while emulating part program

to track progress Active display of X, Y, and Z axes coordinates Display of current tool Display of current G and M codes Display of current feed rate and spindle speed

Simulation of current solenoid and I/O port activity Real-time estimation of machining time

C AutoCAD DXF file import function featuring: Ten layers with independent feed, tool, speed, and

depth settings Support for LINE, MLINE, LWPOLYLINE, POINT,

CIRCLE, and ARC entities Output of the same layer at separate depths to allow

multi-pass engraving

OPTIONAL PNEUMATIC VISEThe Pneumatic Vise, Model 5616, consists of a cylinder-operated vise used to achieve automatic clamping andunclamping of the stock loaded in the CNC Mill. ThePneumatic Vise is supplied with a pneumatic control boxthat connects to the solenoid driver port of the CNC Mill,permitting M-code control of the extension and retractionof the vise cylinder with the CNC Mill Software,Model 5660. The air compressor is not included.

CNC MILL SYSTEMMODEL 5600

4

TABLE OF CONTENTS OF THE USER GUIDESCNC Mill (85977-E0)

C Section 1 Overview and Installation Functional description Front panel Back panel connectors Control panel Handling

C Section 2 Tools and Accessories Cutting tools End mill holders and collets Vises and clamps Cutting precision Conventional milling vs climb milling

C Section 3 Using the Mill Interface The mill firmware Feed rate Spindle speed

C Section 4 Milling Stock Aligning a vise with the mill axes Setting the PRZ using an edge finder Measuring tool offsets Connecting the mill to a computer or Ethernet net-

work Downloading a program Executing a part program

C Section 5 Tutorial Exercise Tutorial

C Section 6 Maintenance Routine maintenance Updating the firmware

CNC Mill Software (36189-E0)

C Section 1 Overview of the CNC Mill Software The Main Screen The Tool Bar The Menu Bar

C Section 2 Operation The File Menu The Edit Menu The Search Menu The Mill Menu The Options Menu The Window Menu The Help Menu

C Section 3 The Part Program Editors The Line Editor The Block Editor

C Section 4 Tutorial Exercises Creating a simple G and M code part program with

the Line Editor Emulating and downloading a G and M code part

program Creating, editing, and exporting a simple block

part program with the Block Editor Importing a *.DXF file into the Line Editor

1 The ordering numbers shown apply to the English 120-V version. Other versions are available. Refer to the Ordering Numbers section.2 The content of this model is in accordance with the requirements of the Project Lead the Way program.3 Model 5601-10 must be purchased along with this model to be in accordance with the requirements of the Project Lead the Way program.

5

LIST OF EQUIPMENTCNC Mill System, MODEL 5600-20

QTY DESCRIPTION ORDERING NUMBER1

1 CNC Mill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5600-B01 Wax Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5404-001 CNC Mill Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5660-001 CNC Mill, User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85977-E01 CNC Mill Software, User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36189-E0

OPTIONAL EQUIPMENTDESCRIPTION ORDERING NUMBER1

Wax Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5403-00Wax Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5404-00Plexiglass Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5405-00Plexiglass Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5406-00Engraving Plate Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5407-00Plexiglass Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5408-00Aluminum Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5409-00Plexiglass Milling Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5441-00Quick Tool Changing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5601-00Quick Tool Changing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5601-102

Four-jaw Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5603-00Milling Vise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5604-00Intermediate Milling Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5607-00Collet Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5609-00End Mill Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5612-103

Engraving Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5613-00Engraving Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5613-103

Pneumatic Vise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5616-00CNC Mill Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5660-00

CNC MILL SYSTEMMODEL 5600

6

SPECIFICATIONSModel 5600-B CNC Mill 120 V 60 Hz 220 V 50 Hz 240 V 50 HzPower Requirement Current 3 A 2 A 2 ASupplied Fuses Current Rating one 2 A and three 1.5 A one 1 A and three 1.5 A

Voltage Rating 250 VMechanical Working Range X Axis (Longitudinally) 178 mm (7 in)

Y Axis (Transversely) 102 mm (4 in)Z Axis (Vertically) 203 mm (8 in); may vary with tool holder or collet used

Positioning Repeatability 0.025 mm (0.001 in)Resolution 0.0079 mm (0.00031 in)

Milling Table Surface 140 x 305 mm (5.5 x 12 in)Hold-Down T Slots two; 15.9 mm (0.625 in) width, 63.5 mm (2.5 in) spacing

Maximum Table-to-Spindle Clearance 216 mm (8.5 in)Cutting Spindle Throat Clearance 191 mm (7.5 in)

Spindle Taper R8Main Spindle Drive Continuous Speed Range 0-3400 rpm

Motor 746 W (1 hp), overload protectedFeed Motors Type Stepper

Resolution 400 steps/rRapid Traverse Speed 508 mm/min (20 in/min)

Mill Vise Opening 98 mm (3.875 in)Width 79 mm (3.125 in)

AccessoriesEnd Mills (two flutes) with Holder Shank Diameter Mill Diameter End Type

4.76 mm (3/16 in) 1.59 mm (1/16 in) square (x2)9.53 mm (3/8 in) 3.18 mm (1/8 in) square9.53 mm (3/8 in) 6.35 mm (1/4 in) square

R8 End Mill Holder Size for 9.53 mm (3/8 in) shank end millsR8 Collet Size for 4.76 mm (3/16 in) shank end millsEdge Finder single 4.76 mm (3/16 in) shank, 5.08 mm (0.2 in) headHold Down Set clamping accessories for clamping the vise or partNull Modem Serial Cable Length 3.05 m (10 ft)

Connectors DB9 female/femaleTTL/IO Cable Length 3.05 m (10 ft)

Connectors DB15 male/maleEthernet Crossover Cable Length 2.13 m (7 ft)

Connectors RJ45 male/maleEngraving Plate Holder holds work measuring 203.2 x 50.8 x 3.18 mm (8 X 2 X 0.125 in)User Guide see the Table of Contents of the User Guide sectionSet of Tools hex keys, wrenches and dial indicatorShim Dimensions 60 x 40 x 13 mm (2.3 x 1.6 x 0.5 in)Physical Characteristics Dimensions (H x W x D) 787 x 787 x 800 mm (31 x 31 x 31.5 in)

Net Weight 169 kg (372 lb)Model 5403 Wax Milling Stock PackageQuantity 100Dimensions 127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in)Model 5404 Wax Milling Stock PackageQuantity 100Dimensions 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)Model 5405 Plexiglass Milling Stock PackageBlocks Quantity 15

Dimensions 127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in)Blocks Quantity 15

Dimensions 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)Blocks Quantity 10

Dimensions 152.4 x 76.2 x 12.7 mm (6 x 3 x 0.5 in)

7SPECIFICATIONS (cont'd)Model 5406 Plexiglass Milling Stock PackageQuantity 100Dimensions 127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in)Model 5407 Engraving Plate PackageQuantity 50Dimensions 203.2 x 50.8 x 3.18 mm (8 x 2 x 0.125 in)Model 5408 Plexiglass Milling Stock PackageQuantity 25Dimensions 152.4 x 76.2 x 12.7 mm (6 x 3 x 0.5 in)Model 5409 Aluminum Milling Stock PackageQuantity 50Dimensions 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)Model 5441 Plexiglass Milling Stock PackageQuantity 100Dimensions 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)Model 5601 Quick Tool Changing SystemMaster Holder for inserting quick -change end mill holdersR8 End Mill Holders Shank Diameter 4.76 mm (3/16 in), 6.35 mm (1/4 in), two 9.53 mm (3/8 in), 12.7 mm (1/2 in)Model 5601-10 Quick Tool Changing SystemMaster Holder for inserting quick- change end mill holdersR8 End Mill Holders Shank Diameter 3.18 mm (1/8 in), 6.35 mm (1/4 in), two 9.53 mm (3/8 in), 12.7 mm (1/2 in)Model 5603 Four-jaw ChuckFour-jaw Chuck Chuck Diameter 89 mm (3.5 in)

Hole Diameter 25 mm (1 in)Hold-down Set clamping accessories for installing the chuck on the mill tableModel 5604 Milling ViseMill Vise Opening 98 mm (3.875 in)

Width 79 mm (3.125 in)Hold-down Set clamping accessories for clamping the vise on the mill tableModel 5607 Intermediate Milling KitEnd Mills Set (single-end, two flutes) Shank Diameter Mill Diameter End Type

9.53 mm (3/8 in) 3.18 mm (1/8 in) square9.53 mm (3/8 in) 3.18 mm (1/8 in) ball9.53 mm (3/8 in) 4.76 mm (3/16 in) square9.53 mm (3/8 in) 4.76 mm (3/16 in) ball9.53 mm (3/8 in) 6.35 mm (1/4 in) square9.53 mm (3/8 in) 6.35 mm (1/4 in) ball9.53 mm (3/8 in) 9.53 mm (3/8 in) square

9.53 mm (3/8 in) x2 9.53 mm (3/8 in) ball9.53 mm (3/8 in) 12.7 mm (1/2 in) square

Hold-down Set clamping accessories for clamping the vise or part on the mill tableEdge Finder single 9.53 mm (3/8 in) shank, 5.08 mm diameter (0.2 in) headR8 End Mill Holders Quantity 6

Size for 9.53 mm (3/8 in) shank end millsR8 Collet Size for 9.53 mm (3/8 in) shank end millsAccessory T-slot cleanerModel 5609 Collet SetType R8Quantity 7Sizes 1.59, 3.18, 6.35, 7.94, 9.53, 11.11 and 12.7 mm (1/16, 1/8, 1/4, 5/16, 3/8, 7/16 and

1/2 in)

CNC MILL SYSTEMMODEL 5600

SPECIFICATIONS (cont'd)

8

Model 5612-10 End Mill KitEnd Mills Set (single-end, two flutes) Shank Diameter Mill Diameter End Type

3.18 mm (1/8 in) 3.18 mm (1/8 in) ball9.53 mm (3/8 in) 3.18 mm (1/8 in) square9.53 mm (3/8 in) 4.76 mm (3/16 in) square6.35 mm (1/4 in) 6.35 mm (1/4 in) ball9.53 mm (3/8 in) 6.35 mm (1/4 in) square9.53 mm (3/8 in) 7.94 mm (5/16 in) square9.53 mm (3/8 in) 9.53 mm (3/8 in) square

Quantity two of eachModel 5613 Engraving KitEnd Mills Set (double-end, two flutes) Shank Diameter Mill Diameter End Type

4.76 mm (3/16 in) 0.79 mm (1/32 in) square4.76 mm (3/16 in) 1.59 mm (1/16 in) square

Quantity two of eachR8 Collet Size for 4.76 mm (3/16 in) shank end millsModel 5613-10 Engraving KitEnd Mills Set (single-end, four flutes) Shank Diameter Mill Diameter End Type

3.18 mm (1/8 in) 0.79 mm (1/32 in) square3.18 mm (1/8 in) 1.59 mm (1/16 in) square

60E Single-flute Countersink Size 3.18 mm (1/8 in)Shank 3.18 mm (1/8 in)

Model 5616 Pneumatic ViseVise Jaws Operation pneumatic

Width 63 mm (2.48 in)Depth 9 mm (0.35 in)

Use for 50.8 mm (2 in) square partsVise Cylinder Type double-acting

Bore 22.2 mm (0.875 in)Stroke 25 mm (1 in)

Pneumatic Control Box Air Supply 275 kPa (40 psig) max.Vise Control Input connects to the solenoid driver port of the CNC MillPneumatic Output Ports two; the air flow through each port can be metered manuallyModel 5660 CNC Mill SoftwareLicenses Number of Users 1, 5, 10, 15, 20, 25, 30 or 35Computer Requirements (minimum) Type Pentium II, 400 MHz

Operating system Windows 98/ME, NT 4.0/2000, or Vista

RAM 32 MB

Graphic Card 3D

4 TBE = To be established

9

ORDERING NUMBERS120 V 60 Hz 220 V 50 Hz 240 V 50 Hz

ENGLISH FRENCH SPANISH ENGLISH FRENCH SPANISH ENGLISH5600-20 TBE4 TBE 5600-25 TBE TBE 5600-2A5600-B0 TBE TBE 5600-B5 TBE TBE 5600-BA5403-00 5403-00 5403-00 5403-00 5403-00 5403-00 5403-005404-00 5404-00 5404-00 5404-00 5404-00 5404-00 5404-005405-00 5405-00 5405-00 5405-00 5405-00 5405-00 5405-005406-00 5406-00 5406-00 5406-00 5406-00 5406-00 5406-005407-00 5407-00 5407-00 5407-00 5407-00 5407-00 5407-005408-00 5408-00 5408-00 5408-00 5408-00 5408-00 5408-005409-00 5409-00 5409-00 5409-00 5409-00 5409-00 5409-005441-00 5441-00 5441-00 5441-00 5441-00 5441-00 5441-005601-00 5601-00 5601-00 5601-00 5601-00 5601-00 5601-005601-10 5601-10 5601-10 5601-10 5601-10 5601-10 5601-105603-00 5603-00 5603-00 5603-00 5603-00 5603-00 5603-005604-00 5604-00 5604-00 5604-00 5604-00 5604-00 5604-005607-00 5607-00 5607-00 5607-00 5607-00 5607-00 5607-005609-00 5609-00 5609-00 5609-00 5609-00 5609-00 5609-005612-10 5612-10 5612-10 5612-10 5612-10 5612-10 5612-105613-00 5613-00 5613-00 5613-00 5613-00 5613-00 5613-005613-10 5613-10 5613-10 5613-10 5613-10 5613-10 5613-105616-00 5616-01 5616-02 5616-00 5616-01 5616-02 5616-00

36189-E0 TBE 36189-E2 36189-E0 TBE 36189-E2 36189-E085977-E0 TBE TBE 85977-E0 TBE TBE 85977-E0

Table 1. Equipment Ordering Numbers (Domestic and International Markets)

NUMBER OFUSERS

120 V 60 Hz 220 V 50 Hz 240 V 50 HzENGLISH FRENCH SPANISH ENGLISH FRENCH SPANISH ENGLISH

1 5660-00 TBE 5660-02 5660-00 TBE 5660-02 5660-005 5660-A0 TBE 5660-A2 5660-A0 TBE 5660-A2 5660-A0

10 5660-B0 TBE 5660-B2 5660-B0 TBE 5660-B2 5660-B015 5660-C0 TBE 5660-C2 5660-C0 TBE 5660-C2 5660-C020 5660-D0 TBE 5660-D2 5660-D0 TBE 5660-D2 5660-D025 5660-E0 TBE 5660-E2 5660-E0 TBE 5660-E2 5660-E030 5660-F0 TBE 5660-F2 5660-F0 TBE 5660-F2 5660-F035 5660-G0 TBE 5660-G2 5660-G0 TBE 5660-G2 5660-G0

Table 2. Software Ordering Numbers (Domestic and International Markets)

Reflecting Lab-Volt's commitment to high quality standards in product, design, development, production, installation, and service, our manufacturing and distributionfacility has received the ISO 9001 certification.

Lab-Volt reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Lab-Volt recognizes all productnames used herein as trademarks or registered trademarks of their respective holders. Lab-Volt 2009. All rights reserved.

94010-00 Rev. E4