®

SUPERIOR WATER PROTECTION

EXTRAORDINARY DURABILITY

& TEAR RESISTANCE

RESISTS JOBSITE ABUSE

MOLD RESISTANT

PART OF A COMPLETE

MOISTURE CONTROL SYSTEM

F L A S H I N G

Moistop PF Flashing is

engineeered to offer a unique

balance of jobsite durability

and cost-effectiveness.

“

”

The primary cause of water intrusion in a commercial orresidential building is the lack of properly integrated flashingaround windows, doors and other fenestrations. When theflashing fails, the cost of repairs and potential exposure tolitigation can be staggering – particularly when water infiltrationleads to problems with mold and mildew.

Moistop PF is a criticalelement in the completeMoisture ControlSystem for Wallspioneered by theFortifiber BuildingSystems Group®. The

product is engineered to answer the need for a mechanically-attached flashing material that offers a unique balance betweenextraordinary durability and cost-effectiveness. Moistop PFresists extreme jobsite abuse – such as heavy wind and rain –while effectively containing costs and protecting structures.

Maximum Durability and FlexibilityMoistop PF is the solution of choice when building requirementscall for a mechanically-attached flashing product that is unaffected bysubstrates or job site conditions. Manufactured from a multi-layercomposite employing heavy-duty polypropylene woven fabric, and coated on bothsides with ultraviolet-resistant polypropylene, the product resists cracking andcurling – both before and after installation.

Moistop PF’s unique construction makes it ideal for installation over OSB orplywood, making it easy to integrate with a weather-resistive barrier. It can be usedon all types of windows, including wood, vinyl and aluminum casing – as well asdoors. The product is available in pre-cut widths of 6, 9, 12 and 18 inches, andinstalls easily with a utility knife and hammer.

Part of a Complete Moisture Control SystemDesigned through the use of building science and perfected in the field, Moistop PF– when combined with one of Fortifiber’s high performance weather-resistivebarriers and Moistop® Sealant – offers the only complete moisture control systemavailable from a single source. Comprised of 100% compatible materials, the systemtakes the guesswork out of selecting flashing, sealant and weather-resistive barriersthat work together and deliver performance you can depend on.

Decades of Proven PerformanceMoistop PF is a product manufactured by the Fortifiber BuildingSystems Group. With more than a seventy-five year history ofproven performance, technical expertise and practical know-how,the company has become a trusted partner to builders, architectsand code officials.

®

Moistop PF

protects against

water intrusion in

windows, doors and other

vertical through-wall

penetrations.

M O I S T O P P F F L A S H I N G

SPECIFICATION SUMMARY: Provides window anddoor concealed perimeter flashing system,including integration with weather-resistivebarriers, to provide secondary weatherprotection behind exterior cladding.

FLEXIBLE WINDOW & DOOR FLASHING: Fortifiber/Moistop PF Flashing multi-layer compositeemploying heavy-duty woven polypropylenefabric coated on both sides with ultraviolet-resistant polypropylene.

Call 1-8OO-773-4777 or 1-775-333-64OO for sales and technical assistance. On the Internet visit www.fortifiber.com.© 2015 Fortifiber Building Systems Group. Fortifiber®, FortiShield®, Moistop PF®, Moistop® Sealant and Protecting Your World from the Elements® are trademarks of Fortifiber Corporation. 12/15

Table 1- Physical Properties

Water Vapor ASTM E-96-A <0.02 Perms <0.57 PermsPermeance ASTM F-1249

Water Resistance ASTM D-779 >130 hours 24 hours

Tensile Strength ASTM D-882 MD - 107 lb.f/inch MD - 20 lb.f/inchCD - 76 lb.f/inch CD - 20 lb.f/inch

Trapezoidal Tear ASTM D-4533 MD - 51 lb.f/inch n/aCD - 41 lb.f/inch

Mold Growth ASTM G-21 0 Fungal Growth n/a

CHARACTERISTIC TEST METHOD RESULTS INDUSTRY STANDARD

Product Description: Moistop PF Flashing is a superiorflexible flashing designed to prevent incidental moistureintrusion around windows and doors.

Composition: Moistop PF is a strong multilayer compositeof heavy-duty woven polypropylene fabric, coated on bothsides with ultraviolet-resistant polypropylene.

Size & Weight: Moistop PF is supplied in convenient6", 9", 12" and 18" widths by 300' long rolls. Weight isapproximately 3.75 lbs (6"), 5.6 lbs (9"), 7.5 lbs (12") and11.25 lbs (18") per roll. Thickness is 6 mils.

Applicable Standards: American Society for Testing &Materials (ASTM)

• ASTM D-779 - Standard Test Method for Water Resistanceof Paper, Paperboard and Other Sheet Materials by the DryIndicator Method

• ASTM D-882 - Standard Test Method for Tensile Propertiesof Thin Plastic Sheeting

• ASTM D-4533 - Standard Test Method for TrapezoidTearing Strength of Geotextiles

• ASTM E-96 - Water Vapor Transmission of Materials

• ASTM F-1249 - Water Vapor Transmission Rate ThroughPlastic Film and Sheeting Using a Modulated Infrared Sensor

• ASTM G-21 - Standard Practice for Determining Resistanceof Synthetic Polymeric Materials to Fungi

Physical Properties: Moistop PF is continually tested inaccordance with ASTM procedures. The values shown inTable 1 are averages obtained in these tests. Complies withASTM E-2112.

Limitations: Moistop PF should not be installedhorizontally or at a slope of less than 60°. The productshould be covered as soon as possible. Inspect product toinsure it is free of any protrusions or damage which maycompromise its moisture-resistive properties.

Installation: For optimum performance, Moistop PFshould be installed in conjunction with Moistop Sealant as a

component of the Moistop Flashing System. In a typicalwindow installation, Moistop PF is first applied at the sill andjambs of window openings. Moistop Sealant is applied towindow flanges and windows are installed. Sealant is thenapplied continuously along the face of window headmounting flange, and Moistop PF is embedded in the sealantalong the head of the window. For complete installationinstructions, contact our Technical Assistance at1-800-773-4777 or download them from our website atwww.fortifiber.com.

Availability: The Fortifiber Building Systems Group’sproducts are distributed nationwide. For product informationand pricing, please call a Fortifiber distributor near you. Ifyou need assistance locating a participating distributor, pleasecall our customer service department at 1-800-773-4777.

Fortifiber Warranty: Fortifiber Corporation warrants that itsproducts are in compliance with their published specificationsand are free from defects in materials and workmanship for aperiod of two years from the date of purchase. This warrantydoes not apply to loss due to abuse. Material found to bedefective will be replaced at no charge by Fortifiber, but in noevent shall Fortifiber be liable for any other costs or damages,including any labor costs.

THIS EXPRESS WARRANTY IS GIVEN IN LIEU OFAND EXCLUDES ALL OTHER EXPRESS ORIMPLIED WARRANTIES, INCLUDING BUT NOTLIMITED TO THE IMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE. Fortifiber’s sole obligationsunder this warranty are as set forth herein. In no event shallFortifiber be liable for any lost revenue or profits, direct,indirect, special, incidental or consequential damages of anykind.

This product may be eligible for Fortifiber’s FortiShield 15year warranty when used in conjunction with other Fortifiberproducts. Please see our website at www.fortifiber.com/warranty.htm for details.

MEMBERAMERICANARCHITECTURALMANUFACTURERSASSOCIATION

Extreme weather conditions on the jobsite call for a flashing product that canwithstand a higher level of abuse, including high winds and heavy rains. Theseextreme conditions also require greater protection against water intrusion andmoisture – as well as the problems they cause, including mold and mildew. That

is why the Fortifiber Building SystemsGroup® has developed Moistop neXT.

Moistop neXT is an ultra-high performance,mechanically attached flashing solutiondeveloped with and for builders who need aproduct that can withstand these extremeweather conditions. Built upon the legacy ofMoistop® Flashing, the industry’s mostpopular flashing product, Moistop neXT’s

robust construction provides a heavy duty barrier against rain-driven waterintrusion – both on the jobsite and in the finished construction.

Stays Put in Extreme Weather ConditionsMoistop neXT Flashing installed with Moistop® Sealant has been third-partytested against the stringent ASTM E-331 test method, and its performancewithstood 100 mile-per-hour wind-driven rain conditions without leaking.Comprised of two layers of high performance polyolefin film, laminated togetherwith a remarkably durable core of fiberglass scrim reinforcement, Moistop neXTmaintains its shape in heavy winds – resisting the shear forces that cause rips andtears. Far stronger than any self-adhesive flashing product, you can pull staplescleanly from wood without tearing the material. It can be used on all types ofwindows including wood, vinyl and aluminum casings and doors. It is the nextlogical step in the evolution of moisture control flashing systems.

Part of a Complete Moisture Control SolutionMoistop neXT integrates with Fortifiber’s complete system of flashing products andaccessories, Moistop Sealant and our entire line of weather-resistive barriers to forma comprehensive weatherization system that protects homes and buildings frommoisture intrusion problems. Designed through the use of building science andperfected in the field, this is the only complete moisture control system available inthe industry from a single source. Comprised of compatible materials, the systemtakes the guesswork out of selecting flashing, sealing materials, and weather-resistivebarriers that work together and deliver performance you can count on.

Decades of Proven PerformanceMoistop neXT is a product manufactured by the FortifiberBuilding Systems Group. With more than a seventy-five yearhistory of proven performance, technical expertise and practicalknow-how, the company has become a trusted partner to builders,architects and code officials.

FOR EXTREME WEATHER

CONDITIONS

ULTRA-HIGH PERFORMANCE

WATER BARRIER

IDEAL FOR METAL, WOOD,AND VINYL WINDOWS

HIGHLY RESISTANT TO

RIPS AND TEARS

MOLD RESISTANT

PART OF A COMPLETE

MOISTURE CONTROL SYSTEM

“ Moistop neXT’s robust

construction provides a

heavy duty barrier

against rain-driven

water intrusion...”

Moistop neXT

protects against water

intrusion in windows, doors and

other vertical through-wall

penetrations.

®

M O I S T O P n e X T

SPECIFICATION SUMMARY: Provides window anddoor concealed perimeter flashing system,including integration with weather-resistivebarriers, to provide secondary weatherprotection behind exterior cladding.

FLEXIBLE WINDOW & DOOR FLASHING: Fortifiber /Moistop neXT Flashing two layers of waterresistant polyolefin film laminated togetherwith an internal fiberglass reinforcement.

REFERENCE SPECIFICATION: Complies with ASTME-2112.

Call 1-8OO-773-4777 or 1-775-333-64OO for sales and technical assistance. On the Internet visit www.fortifiber.com.© 2015 Fortifiber Building Systems Group. Fortifiber®, FortiShield®, Moistop neXT®, Moistop® Sealant and Protecting Your World from the Elements® are trademarks of Fortifiber Corporation. 12/15

Table 1- Physical Properties

Water Vapor ASTM E-96 .049 perms <0.57 permsPermeance (Method B)

Water Resistance ASTM D-779 150 hours 24 hours

Tensile Strength ASTM D-882 MD 35 lb.f/inch 20 lb.f/inchASTM D-882 CD 27 lb.f/inch 20 lb.f/inch

Tear Strength ASTM D-1922 MD 3200+ gramsASTM D-1922 CD 3200+ grams

Mold Growth ASTM G-21 0 Fungal Growth n/a

CHARACTERISTIC TEST METHOD RESULTS INDUSTRY STANDARD

Product Description: Moistop neXT Flashing is a superiorflexible flashing designed to prevent incidental moistureintrusion around windows and doors.

Composition: Moistop neXT Flashing is a strong membraneconstructed of two layers of water resistant polyolefin filmlaminated together with a tough internal fiberglass reinforcement.

Size & Weight: Moistop neXT is supplied in convenient 6", 9"and 12" widths by 200' long rolls. Weight is approximately 6lbs (6"), 9 lbs (9") and 12 lbs (12") per roll. Thickness is 15 mils.

Applicable Standards: American Society for Testing &Materials (ASTM)

• ASTM D-779 - Standard Test Method for Water Resistance ofPaper, Paperboard, other Other Sheet Materials by the DryIndicator Method

• ASTM D-882 - Standard Test Method for Tensile Properties ofThin Plastic Sheeting

• ASTM D-1922 - Standard Test Method for Propagation TearResistance of Plastic Film and Thin Sheeting by PendulumMethod

• ASTM E-96 - Water Vapor Transmission of Materials

• ASTM E-331 - Standard Test Method for Water Penetration ofExterior Windows, Skylights, Doors, and Curtain Walls byUniform Static Air Pressure Difference

• ASTM E-1249 - Water Vapor Transmission Rate ThroughPlastic Film and Sheeting Using a Modulated Infrared Sensor

• ASTM G-21 - Standard Practice for Determining Resistance ofSynthetic Polymeric Materials to Fungi

Physical Properties: Moistop neXT is continually tested inaccordance with ASTM procedures. The values shown inTable 1 are averages obtained in these tests. Complies withASTM E-2112.

Limitations: Moistop neXT should not be installedhorizontally or at a slope of less than 60°. Product should becovered as soon as possible. Inspect product to insure it is freeof any protrusions or damage that may compromise itsmoisture-resistive properties.

Installation: For optimum performance, Moistop neXT shouldbe installed in conjunction with Moistop Sealant as a componentof the Moistop neXT Flashing System. In a typical windowinstallation, Moistop neXT Flashing is first applied at the sill andjambs of window openings. Moistop Sealant is applied to thewindow flanges and windows are installed. Sealant is then appliedcontinuously along the face of window head mounting flange,and Moistop neXT Flashing is embedded in the sealant alongthe head of the window opening. For complete installationinstructions, contact our Technical Assistance at 1-800-773-4777or download them from our website at www.fortifiber.com.

Availability: The Fortifiber Building Systems Group productsare distributed nationwide. For product information and pricing,please call a Fortifiber distributor near you. If you needassistance locating a participating distributor, please contact ourCustomer Service Department at 1-800-773-4777.

Fortifiber Warranty: Fortifiber Corporation warrants that itsproducts are in compliance with their published specificationsand are free from defects in materials and workmanship for aperiod of two years from the date of purchase. This warrantydoes not apply to loss due to abuse. Material found to bedefective will be replaced at no charge by Fortifiber, but in noevent shall Fortifiber be liable for any other costs or damages,including any labor costs.

THIS EXPRESS WARRANTY IS GIVEN IN LIEU OFAND EXCLUDES ALL OTHER EXPRESS OR IMPLIEDWARRANTIES, INCLUDING BUT NOT LIMITED TOTHE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE.Fortifiber’s sole obligations under this warranty are as set forthherein. In no event shall Fortifiber be liable for any lost revenueor profits, direct, indirect, special, incidental or consequentialdamages of any kind.

This product may be eligible for Fortifiber’s FortiShield 15 yearwarranty when used in conjunction with other Fortifiberproducts. Please see our website at www.fortifiber.com/warranty.htm for details.

MEMBERAMERICANARCHITECTURALMANUFACTURERSASSOCIATION

MOISTOP

Call 1-8OO-773-4777 or 1-775-333-64OO

for sales and technical assistance.

On the Internet visit www.fortifiber.com.

© 2015 Fortifiber Building Systems Group. Fortifiber®, FortiShield®, Moistop Corner Shield® and Protecting Your World from the Elements® are trademarks of Fortifiber Corporation. 12/15

Moistop Corner Shield Features

C O R N E R S H I E L D S ®

Rugged • Monolithic molded cornersConstruction • Made from durable high density

polyethylene plastic

• Won't crack or deform

Corner Shape • Does not require molding to the corner

• Fits snugly and will not gap

Easy to Install • Does not require large mechanicalfasteners

• Installs with sealant and a stapler

Part of a Complete • Engineered to work with Fortifiber'sMoisture Control complete moisture control systemSystem • Strengthens complete flashing system

Preformed Product • Uniform size and shape

Moistop Rigid Corner Shield Features

Conforms to the • Integrates into the wall system, to create aWindow Frame seamless drainage plane

• Can correct for framing irregularities

Part of a Complete • Engineered to work with Fortifiber'sMoisture Control complete moisture control systemSystem

Polyolefin • Abuse resistant, for high reliability on theConstruction jobsite; flexible

Welded Corners • Highly durable solution for the ultimate inmoisture protection

Easy to Install • Does not require large mechanicalfasteners

• No measurement; easy cutting

Cost • More cost-effective than the bitumen andbutyl products

• Low cost insurance for window installation,minimizing expensive liability claims

Fortifiber Warranty: Fortifiber Corporation warrants that itsproducts are in compliance with their publishedspecifications and are free from defects in materials andworkmanship for a period of two years from the date ofpurchase. This warranty does not apply to loss due to abuse.Material found to be defective will be replaced at no chargeby Fortifiber, but in no event shall Fortifiber be liable for anyother costs or damages, including any labor costs.

THIS EXPRESS WARRANTY IS GIVEN IN LIEU OF AND EXCLUDES ALLOTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE. Fortifiber’s sole obligations under this warranty areas set forth herein. In no event shall Fortifiber be liable for any lostrevenue or profits, direct, indirect, special, incidental or consequentialdamages of any kind.

This product may be eligible for Fortifiber’sFortiShield 15 year warranty when used in

conjunction with other Fortifiberproducts. Please see our website at www.fortifiber.com/warranty.htm for details.

MEMBERAMERICANARCHITECTURALMANUFACTURERSASSOCIATION

STRONG, FLEXIBLE, DURABLE

AND PAINTABLE

ADHERES TO MOST SURFACES

AND CONFORMS TO ANY SHAPE

LOW VOC FORMULATION

FEWER PRODUCTS NEEDED

ON JOBSITE, REDUCING WASTE

PART OF A COMPLETE

MOISTURE CONTROL SYSTEM

VAPOR PERMEABLE

One Tube: Multiple UsesThe primary cause of water intrusion is the lack of properlyintegrated flashing around windows, doors and otherfenestrations. The cost of these repairs and potential exposureto litigation can be staggering, particularly when waterleakage leads to problems with mold and mildew. MoistopSealant and Liquid Flashing can be used as both a sealant andflashing, providing a multi-tasking solution for improved

weatherizationeffectiveness and jobsiteefficiency.

Completely CompatibleMoisture Resistant SealantMoistop Sealant and Liquid Flashing is anadvanced polymer designed to be compatible withvirtually all building materials. Moistop deliversexcellent adhesion, compatibility, durability andmoisture resistance to prevent door and windowwater leaks, and the expensive callbacks they

cause. It is also suitable for use in construction joints up to one half inch in width.Moistop exceeds ASTM C920 and AAMA 808.3-92 (Exterior Perimeter SealingCompounds) standards.

Durable Liquid Applied FlashingUsed as a liquid flashing system, Moistop Sealant and Liquid Flashing provides gap-free protection to rough and irregular surfaces. It is particularly useful when applyingflashing to curved intrusions like vents and plumbing, and is highly effective withmasonry window and door installations. Where specified as a liquid applied flashing,the product exceeds AAMA 714 standards. And even though Moistop is toughenough to repair torn vapor barriers, it is smooth enough to take paint in visibleapplication areas.

Part of a Complete Moisture Control SolutionImprove jobsite efficiency and reduce waste by specifying and using a single productwith multiple moisture protection uses.

Moistop Sealant and Liquid Flashing is part of the Fortifiber® Protection System andis highly effective when paired with Jumbo Tex® building paper, WeatherSmart®

housewraps, and all Fortifiber flashings. Together they form a comprehensiveweatherization system that protects homes and buildings against moisture intrusionproblems. Designed through the use of building science and perfected in the field,this is the only complete moisture control system available in the industry from asingle source. When this complete system is installed properly, builders are eligiblefor 15 year warranty protection that covers both materials AND labor.

The Fortifiber Building Systems Group® is proud to offer thisMade-In-USA product. With more than a seventy-five yearhistory of proven performance, technical expertise and practicalknow-how, the company has become a trusted partner to builders,architects and code officials.

“ Advanced polymer

technology delivers superior

adhesion, compatibility and

durability to prevent water

leaks and the expensive

callbacks they cause.”

®

MOISTOP SEALANT & LIQUID FLASHING

SPECIFICATION SUMMARY: Providesan exterior perimeter sealingcompound for windowsand doors that is compatible withmost commonly used buildingmaterials.

FLEXIBLE WINDOW & DOOR

FLASHING: One-component,moisture curing, non-sagelastomeric liquid appliedflashing.

REFERENCE SPECIFICATION: AAMA808.3-92 (Exterior PerimeterSealing Compound); ASTM C920Type S, Grade NS, Class 25.

1-8OO-773-4777 · www.fortifiber.com© 2015 Fortifiber Building Systems Group®. Fortifiber®, Jumbo Tex®, Moistop® Sealant and Liquid Flashing, PlyDry®, Protecting Your World from the Elements® and WeatherSmart® are trademarks of

Fortifiber Corporation. 3/16

Product Description: Moistop Sealant and Liquid Flashing is a onecomponent, moisture curing, non-sag, gun-grade elastomericpolymer for use as a sealant or liquid applied flashing.

Size: Moistop Sealant and Liquid Flashing is available in 10.1 fl. oz.(300 ml) and 28 fl. oz. (828 ml) cartridges and 20 fl. oz. (591 ml)sausage packs.

Applicable Standards: ASTM C920 Type S, Grade NS, Class 25,Use-NT, Use-A, Use-M, Use-G, Use-O, AAMA 808.3-92 (ExteriorPerimeter Sealing Compound), AAMA 714-15.

Limitations: Not recommended for unprimed masonry joints thatwill be subjected to continuous water immersion; joints that arecontaminated with grease, wax, corrosion or cement laitance;horizontal joints in floor or decks where physical abuse isencountered; special architectural finishes without proper testing.Not compatible with solvent-based paints.

Application Limitations: Moistop Sealant and Liquid Flashingshould be applied when temperatures are between 40°F and 112°F.Do not apply to frost-bearing surfaces or when temperatures havebeen below freezing for more than 24 hours immediately prior toinstallation. Tooling techniques using solvents or soapy solutions arenot recommended; sealant cannot be cleaned/tooled uncured withsolvents (isopropyl alcohol is recommended). All surfaces must beevaluated for adhesion prior to product acceptance.

Compatibility and Adhesion: It is expected that Moistop Sealantand Liquid Flashing will adhere and perform in uncontaminatedjoints with most common construction substrates. Substrates includebut are not limited to concrete, exterior gypsum, stucco, EIFS,aluminum, galvanized surfaces, glass, wood and polyvinyl chloride(PVC). Due to the vast numbers and types of surface coatings andtreatments available, the Fortifiber Building Systems Grouprecommends pretesting Moistop Sealant and Liquid Flashing on thesurface in question. Sealant compatibility testing is not required forFortifiber’s full line of flashing products and weather-resistivebarriers. All surfaces should be clean and clear of any surfacecontamination. In the case of some exotic coatings, priming or othersurface treatment may be necessary.

Shelf Life: Moistop Sealant and Liquid Flashing will exhibit a ten(10) month shelf life when stored at temperatures not exceeding75°F. “Use by” date is printed on each tube.

Availability: The Fortifiber Building Systems Group’s products aredistributed nationwide. For product information and pricing, pleasecall a Fortifiber distributor near you. If you need assistance locating aparticipating distributor, please call our Customer ServiceDepartment at 1-800-773-4777.

Precautions: IF THIS PRODUCT IS USED IN DIRECTCONTACT WITH ANY OTHER SEALANT OR ELASTOMER,A COMPATIBILITY TEST MUST BE CONDUCTED BYPURCHASER OR USER, PRIOR TO ACCEPTANCE. MOISTOPSEALANT AND LIQUID FLASHING IS NOT COMPATIBLEWITH OXIME CONTAINING SILICONE SEALANTS. Thesuitability of this product, for each intended use, must be determinedby the purchaser prior to acceptance. Avoid skin contact. On contact,uncured sealant could cause irritation to the skin and eyes. In the caseof eye contact, flush immediately with warm water for at least 15minutes and call a physician. For skin contact, remove with a towel andwash the affected area with a citrus-based hand cleaner. If swallowed,do not induce vomiting; call a physician. This product is manufacturedfor industrial use only. Refer to Safety Data Sheet (SDS) on thecompany’s website at www.fortifiber.com for further information. Formedical emergency call ChemTrec 1-800-424-9300.

Fortifiber Warranty: This product may be eligible for Fortifiber’sFortiShield® 15 year warranty when used in conjunction with otherFortifiber products. Please see our website at www.fortifiber.com/warranty.htm for details.

Fortifiber Corporation warrants that its products are in compliancewith their published specifications and are free from defects inmaterials and workmanship for a period of two years from the date ofpurchase. This warranty does not apply to loss due to abuse. Materialfound to be defective will be replaced at no charge by Fortifiber, but inno event shall Fortifiber be liable for any other costs or damages,including any labor costs.

THIS EXPRESS WARRANTY IS GIVEN IN LIEU OF ANDEXCLUDES ALL OTHER EXPRESS OR IMPLIEDWARRANTIES, INCLUDING BUT NOT LIMITED TO THEIMPLIED WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE. Fortifiber’s soleobligations under this warranty are as set forth herein. In no event shallFortifiber be liable for any lost revenue or profits, direct, indirect,special, incidental or consequential damages of any kind.

Peel Adhesion: 20 lb/in ASTM C794Pass AAMA 800

Tensile Maximum: 200 psi (1.38 N/mm²) ASTM D412

Elongation: 450% ASTM D412

Max VOC: 9 g/l (.075 lbs/gal) ASTM D3960

Hardness: 30 ±5 ASTM C661

Service Temperature: -40° to 180°F (-40°C to 82.2°C) –

Application Temperature: 40°F to 110°F (0°C to 43.3°C) –

Tack Time: <1 hour 1/4” (6.34 mm) diam. bead@ 77°F (25°C); 50% R.H.

Cure Time: 24 hours 1/4” (6.34 mm) diam. bead@ 77°F (25°C); 50% R.H.

Movement Capability: ±25% ASTM C719

Liquid Applied Flashing: Pass AAMA 714-15

CHARACTERISTIC RESULTS TEST METHOD

Table 1- Physical Properties

MEMBERAMERICANARCHITECTURALMANUFACTURERSASSOCIATION

Table 2- Approximate Coverage (Ln. Ft. per 10 oz.)

3/8" Bead 30' - -

4" width - 15' 10'

6" width - 10' 6'

LI UID APPLIED FLASHING

SEALANT 25 MIL 40 MIL