ds gypframe profiles 220 03

8/13/2019 DS Gypframe Profiles 220 03

1/12

Gypframe profilesDimensional specifications


2/12


3/12

Gypframe sections

3Data Sheet DS-220-03 www.british-gypsum.com

Gypframe 'C' Studs

The Gypframe 'C' Stud design includes sight lines down the legs of the stud to ease board alignment and increase profile

strength. Structural apertures are also spaced along the spine of the Gypframe 'C' Stud, providing easy routing of services

through a partition.

Gypframe studs

Used as the vertical support in wall framing, these products are available in a range of widths, lengths and gauge depending

on requirements for strength, height, impact resistance and sound insulation. Profile drawings on page 7.

Gypframe AcouStuds

These unique shaped studs are used for increased acoustic performance, with the patented profile absorbing sound as it passes

through a wall. Gypframe AcouStuds can be used to upgrade the acoustic performance of 43mm, 70mm, 92mm and 146mm wall

systems without using insulation. The Gypframe AcouStud design includes sight lines for both board alignment and added

profile strength. Gypframe AcouStuds have wider flange widths than Gypframe 'C' Studs, providing increased board fixing area.

Gypframe 'I' Studs

These studs are the strongest available in the Gypframe range. They allow for increased partition height, without increasing

partition width, and provide improved impact resistance. Commonly used in ShaftWall, GypLyner IWL, GypWall QUIET IWL and

other GypWall systems where board fixing strength is paramount. Structural apertures are also spaced along the spine of the

Gypframe 'I ' Stud, providing easy routing of services through a partition.

Product description Width Gauge Available lengths Linear metre weight

mm mm mm kg

48 S 50 48 0.50 2400, 2700, 3000, 3600, Bespoke 0.46

60 S 50 60 0.50 3000, 3600, Bespoke 0.53

70 S 50 70 0.50 2400, 2700, 3000, 3600, 4200, Bespoke 0.54

70 S 60 70 0.60 3600, 4200, Bespoke 0.67

92 S 50 92 0.50 3600, 4200, Bespoke 0.64

92 S 60 92 0.60 4200, Bespoke 0.81

92 S 10 92 1.00 3600, 4200, Bespoke 1.28

146 S 50 146 0.50 3000, 3600, 4200, Bespoke 0.93


mm mm mm kg

43 AS 50 43 0.50 2395, 2695, Bespoke 0.58

70 AS 50 70 0.50 2400, 2700, 3000, 3600, 4200, Bespoke 0.73

92 AS 50 92 0.50 3600, 4200, Bespoke 0.81

146 AS 50 146 0.50 3600, Bespoke 1.03


mm mm mm kg

48 I 50 48 0.50 2700, 3000, Bespoke 0.70

60 I 50 60 0.50 2700, 3600, Bespoke 0.74

60 I 70 60 0.70 3600, 4200, Bespoke 0.97

70 I 50 70 0.50 3600, 4200, Bespoke 0.83

70 I 70 70 0.70 3600, 4200, Bespoke 1.19

92 I 90 92 0.90 3600, 5000, 6000, Bespoke 1.61

146 I 80 146 0.80 5000, 6000, Bespoke 1.74

146 TI 90 146 0.90 5000, 6000, Bespoke 0.94


4/12

Gypframe profilesDimensional specifications data sheet

Gypframe sections (continued)

4 Data Sheet DS-220-03www.british-gypsum.com

Gypframe Folded Edge Standard, Deep Flange and Extra Deep Flange Floor & Ceiling channels

These products are used for retaining wall studs at floor and ceiling junctions. The Standard (FEC) channels incorporate folded

edges to provide a safer working edge. Deep Flange (DC) and Extra Deep Flange (EDC) are available for partitions between4200mm high and 8000mm high respectively, or in situations where deflection head details, improved impact resistance and

easier skirting fixing are required. Profile drawings on page 7.

Gypframe CurveLyner channel

A patented version of Gypframe Extra Deep Flange Floor & Ceiling Channel with an innovative design to simplify the construction

of curved walls to a minimum radius of 600mm. Profile drawings on page 7.

CasoLine MF ceiling channels and accessories

These channels and associated accessories are designed for providing seamless suspended ceilings that can be either flat or curved.

Profile drawings on page 8.


mm mm mm kg

50 FEC 50 50 0.50 3600, Bespoke 0.44

62 FEC 50 62 0.50 3600, Bespoke 0.48

72 FEC 50 72 0.50 3600, Bespoke 0.52

94 FEC 50 94 0.50 3600, Bespoke 0.61

148 FEC 50 148 0.50 3600, Bespoke 0.82

50 DC 60 50 0.60 3600, Bespoke 0.70

62 DC 60 62 0.60 3600, Bespoke 0.75

72 DC 60 72 0.60 3600, Bespoke 0.80

94 DC 60 94 0.60 3600, Bespoke 0.90

148 DC 60 148 0.60 3600, Bespoke 1.16

50 EDC 70 50 0.70 3600, Bespoke 1.06

72 EDC 80 72 0.80 3600, Bespoke 1.31

94 EDC 70 94 0.70 3600, Bespoke 1.28

148 EDC 80 148 0.80 3600, Bespoke 1.75


mm mm mm kg

72 EDCL 80 72 0.80 2000, Bespoke 1.35

Product description Depth Gauge Available lengths Linear metre weight

mm mm mm kg

MF5 Ceiling Section 25 0.50 3600, Bespoke 0.47

MF6 Perimeter Channel 28 0.50 3600 0.31

MF7 Primary Support Channel 45 0.90 3600, Bespoke 0.50

MF7C Curved Support Channel 15 0.90 3600, Bespoke radius 0.50

MF8 Strap Hanger 25 0.60 25 metre coil 4.00 (per coil)


5/12



GypLyner channels and accessories

This range of channels and accessories is designed for the ease of installing plasterboard linings on masonry walls, concrete

soffits, timber joists, and the encasement of steel columns and beams. Profile drawings on page 9.

ShaftWall starter channels

This range of channels and compatible accessories is designed specifically for the high performance ShaftWall system.


GypFloor SILENT floor channels

Providing support for the GypFloor SILENT acoustic floor system, these channels come with an integral neoprene acoustic isolator.


GypWall RAPID dB Plus studs and channelsThese studs, channels and accessories are designed to be used together to form the GypWall RAPID dB Plus housing partition

system. Profile drawings on pages 7 and 9.


mm mm mm kg

60 SC 55 Starter Channel 60 0.55 3600, Bespoke 0.47

62 JC 70 J Channel 62 0.70 3600, Bespoke 0.94

70 SC 70 Starter Channel 70 0.70 3600, 4200, Bespoke 0.69

92 SC 90 Starter Channel 92 0.90 5000, 6000, Bespoke 1.08

146 TSC 90 Tabbed Starter Channel 146 0.90 5000, 6000, Bespoke 1.42

G102 Retaining Channel 35 0.40 2400, Bespoke 0.21




mm mm mm kg

SIF1 Floor Channel 126 0.60 2000, Bespoke 1.00




mm mm mm kg

GWR2 Nogging Channel 43 0.45 896 0.56

GWR3 Floor & Ceiling Channel 45 0.50 2400 0.42


mm mm mm kg

GL1 Lining Channel 45 0.50 2400, 2700, 3000, 3600, Bespoke 0.42

GL8 Track 21 0.50 3600 0.28

MF10 Channel 50 0.55 2800 0.36


6/12



Gypframe fixing channels

Used for a variety of applications including cross bracing on twin frame wall systems and fixing of medium to heavy weight fittings.

Gypframe 99 FC 50 Fixing Channel: used for bracing twin frame wall systems and medium weight fixtures to BS 52341

. GypframeService Support Plate: used for the installation of plywood within a partition cavity. Profile drawings on page 10.

1 BS 5234 defines light, medium and heavy weight fixtures.

Gypframe angles

Widely used in framed construction to provide support, fixing and additional strength to wall, ceiling and encasement framing.


Gypframe board jointing components

A range of products used to support horizontal plasterboard joints where a wall is more than one board high and within

deflection heads. Profile drawings on page 10.

Gypframe sound insulating bars

These specially engineered products are used to optimise acoustic performance in wall and ceiling systems (RB1) and in

ceilings, where they are also used to eliminate nail popping (RB2). Profile drawings on page 9.



mm mm mm kg

99 FC 50 99 0.50 2400 0.71

Service Support Plate 106 0.60 130 0.10 (per plate)


mm mm mm kg

FEA1 Steel Angle 25 x 25 0.50 2900 0.21

GA2 Steel Angle 25 x 25 0.70 3200 0.28

GA3 Steel Angle 19 x 32 0.70 3200 0.34

GA4 Steel Angle 25 x 50 0.70 3660 0.52

GA5 Internal Fixing Angle 60 x 60 0.50 3600 0.53

GA6 Splayed Angle 85 x 85 0.50 2400, 3600 0.67


mm mm mm kg

GFS1 Fixing Strap 70 0.50 2400 0.29

GFT1 Fixing T 50 0.50 2400 0.29

Product description Depth Gauge Available lengths Linear metre weight

mm mm mm kg

RB1 Resilient Bar 16 0.45 3000 0.33

RB2 SureFix Bar 10 0.50 3000 0.23


7/12


Gypframe profiles

Studs

Channels

Gypframe C Studs

Gypframe AcouStuds

Gypframe Folded Edge Standard, Deep Flange and Extra Deep Flange

ShaftWall Channels

GypWall RAPID dB Plus Channel

Gypframe I Studs

Nogging Channel

Gypframe metal components - understanding the codes

Note: the first two or three digits of each code refer to the component width, the letters refer to the component type and the last two numbers indicate metal thickness in mm.

Examples: 60 S 50 refers to 60mm wide, C shaped Stud with a metal thickness of 0.50mm. 70 I 70 refers to 70mm wide, I shaped stud with a metal thickness of 0.70mm.

Gypframe metal components - understanding the codes

Note: the first two or three d igits of each code refer to the component width, the letters refer to the component type and the last two numbers indicate metal thickness in mm.

Examples: 50 FEC 50 refers to 50mm wide Folded Edge Standard Channel with a metal thickness of 0.50mm. 72 EDC 80 refers to 72mm wide Extra Deep Flange Channel with a metal thickness of 0.80mm.

48 S 50 60 S 50 70 S 5070 S 60 92 S 50 92 S 6092 S 10 146 S 50

Tabbed Starter Channel

50 FEC 50 62 FEC 50 72 FEC 5094 FEC 50 148 FEC 50

48 I 50 60 I 50 60 I 7070 I 50 70 I 70 92 I 90

146 I 80

IStuds

TabbedIStud146 TI 90

AcouStuds

Gypframe CurveLyner Channel

CStuds

43 AS 50

AcouStud70 AS 5092 AS 50

146 AS 50

GWR2 Nogging

Folded Edge Standard C Channel50 DC 60 62 DC 60 94 DC 6072 DC 60 148 DC 60

Deep Flange DC Channel50 EDC 70 72 EDC 8094 EDC 70 148 EDC 80

Extra Deep Flange EDC Channel

146 TSC 90

Starter Channels

60 SC 55 70 SC 70 92 SC 90

Head J Channel50/70mm deep flanges

62 JC 70

Retaining Channel60mm & 146mm

Istuds - ShaftWall

G102

Retaining Channel92mm Istuds

- ShaftWall

G105

Retaining Channel70mm Istuds

- ShaftWall

G110

CurveLyner Channel

72 EDCL 80

GWR3 Floor & Ceiling Channel

45 C 50


8/12


Gypframe profiles (continued)


CasoLine MF ceiling sections & accessories

Bracketed figures indicate gauge.NB

Ceiling Section(0.50mm)

MF5

Acoustic Hanger

(1.5mm)GAH1

Acoustic Hanger

(1.5mm)GAH2

Connecting Clip

MF9

Nut & Bolt

MF11

Perimeter Channel(0.50mm)

MF6

Primary Support Channel(0.90mm)

MF7

Curved Support Channel(0.90mm)

MF7C

Strap Hanger(0.50mm)

MF8

Steel Angle(0.50mm)

FEA1

Soffit Cleat(1.6mm)

MF12


9/12



GypLyner and GypFloor SILENT sections

1 55mm x 6.25mm Neoprene Acoustic Isolator.


11 1

Channel(0.50mm)

GL1

Track(0.50mm)

GL8

Framing Clip

GL10

Timber Connector

GL5

Channel(0.55mm)

MF10

SureFix Bar(0.50mm)

RB2

Resilient Bar(0.45mm)

RB1

Channel Connector

(0.50mm)GL3

Timber Connector

GL5

Floor Channel(0.60mm)

SIF1


SIF2


SIF4

Bracket(1.00mm)

GL2

Bracket(1.00mm)

GL9

Bracket(1.00mm)

GL12


10/12




Miscellaneous sections

Steel Angles



Steel Angle(0.50mm)

FEA1

Steel Angle(0.70mm)

GA3

Steel Angle(0.7mm)

GA2

Steel Angle(0.70mm)

GA4

Internal Fixing Angle(0.50mm)

GA5 Splayed Angle(0.50mm)

GA6

Acoustic Brace

GAB3

Skirting Plate(0.60mm)

for Gyproc TriLine

G106

FixingChannel(0.50mm)

99 FC 50

Fixing Strap(0.55mm)

GFS1

Fixing T(0.55mm)

GFT1Service Support Plate(140mm long / 0.6mm thick)

Spacer Clip

SC1

Spacer Clip

SC2


11/12



12/12

ds gypframe profiles 220 03

Documents