drylin digital measuring systems...k1 c2 a 2 k 1 s a h m a 1 c4 c5 h l min. 6 ws-10-40 c cm kz k1 c2...
TRANSCRIPT
-
957
drylin® digital measuring systems
Ready-to-install complete systems Lubrication free Lockable carriages Battery operation Flexible and mobile
-
958 9593D CAD data, prices and delivery times www.igus.eu/drylin-measuringLifetime calculation, configuration and more www.igus.eu/drylin-measuring
drylin® | digital measuring systems | Product overviewdrylin® | Digital measuring systems | BenefitsLubrication free, light, quiet, long service life, low cost Profile guide systems for almost unlimited design freedom
drylin® digital measuring systemsThe drylin® measuring systems use magne-tic tape with incremental measuring systems. The integrated battery ensures a service life of many years and enables almost absolute measurement. The sensor, measuring display and magnetic tape are integrated in lubrication free drylin® W and Q linear guide systems. With customer-specific rail lengths, systems are sup-plied as ready-to-install linear modules. Typical application areas are format adjustments.
Simple installation Easy to adjust Lubrication and maintenance free Battery powered Unsupported use Optional: Mounted rail -> measuring carriage moves Mounted measuring rail -> rail moves
Typical application areas Format adjustments Bending machines Band saws Stop dog positioning for profiles, frames, plates, tubes, wood and bar stock
max. +70 °Cmin. -10 °C
Carriage widths: 45 - 134 mmRail length: up to 4000 mm
Detailed technical data www.igus.eu/drylin-measuring
Available from stockDetailed information about delivery time online.
Online product finder www.igus.eu/drylin-finder
drylin® Q square guide for unsupported structures
Measuring sensor integrated in the carriage With fixed or flexible display From page 962
SLW linear module with integrated measuring sensor
Driven by trapezoidal thread Programmable display From page 963
drylin® W linear guide with digital measuring display
Max. rail length: 4,000 mm Measuring display attached to the side of the carriage From page 964
drylin® W linear guide with fixed measuring display
Moving rail with stationary carriage Max. rail length: 2,000 mm From page 964
drylin® W linear guide with external measuring display
Carriage with integrated sensor Suitable for aluminium design profiles From page 965
drylin® W linear guide system for external data output
Variable sensor type, output power and cable length Cable guide and protection possible through e-chain® 045.10.028.0 From page 966
Analogue position indicator available From page 1116
Hard-anodised drylin® aluminium profiles
Delivered ready to install
Suitable for aluminium design profiles
Carriages with internal or external display
LCD display with battery
Lubrication free drylin® linear guide systems with or without a drive
Rails fixed or mobile
A magnetic tape is used for reference
Freely selectable rails lengths
-
960 9613D CAD data, prices and delivery times www.igus.eu/drylin-measuringLifetime calculation, configuration and more www.igus.eu/drylin-measuring
drylin® | Digital measuring systems | Technical datadrylin® | Digital measuring systems | Technical data
PropertiesMeasuring principle Incremental, with zero functionDisplay LCD display 7.5 mm high digitsDisplay accuracy max. 0.1 mmDisplay/display area -99 999 …+99 999Function Digit direction, decimal point, unit of measurement (mm,inch), preset activationPower supply Battery 1/2 AA, 3.6 V integrated, service life of up to 4 yearsMagnetic sensor Securely connected (external)Type Installation housingHousing Plastic
Protection classIP54 displayIP67 sensor
Working temperature 0…+50°CHumidity 35-85%Speed max. 2.5 m/sDisplay keyboard 3 function buttons
PropertiesMeasuring principle Incremental, with zero functionDisplay Lowest power LCD with integrated sensor, battery operatedDisplay accuracy max. 0.1 mmRepeatability ± 1 digitDisplay/display area -99 999 …+99 999
FunctionIncremental and reset functionDirect input offset value
Power supply Battery integrated, service life of up to 10 yearsMagnetic sensor Securely connectedType Installation housingHousing Zinc die-casting
Protection classIP20 overall deviceIP60 display page
Working temperature 0…+60°CHumidity 95% rel. humidity, condensation not permissibleSpeed max. 3.5 m/s
PropertiesMeasuring principle IncrementalRepeatability ± 1 incrementPole division 5 mmSensor housing Zinc die-castingProtection class IP67Application temperature -10 … +70° CMax. humidity 95%, non-condensingMax. speed 4.0 m/sVDC power supply 5 VDC or 10… 30 VDC
Current draw5 VDC: max. 200 mA10.. 30 VDC: max. 150mA
Internal evaluation electronics Internal evaluation electronicsOutput power 5 V-TTL line driver or 10.. 30 V_HTLSource tracks A, A‘,B, B‘, Z, Z‘
Max. cable lengthMax. cable length 5V/5V-TTL = 10m10-30V/10-30V = 30m10-30V/5V-TTL = 50m
Max. permissible distance from magnetic tape 2.0 mmConnection method Open cable ends
PropertiesEncoding Incremental, single-track systemBasic pole division 5 mm pole divisionBand width 10 mmOperating temperature, processed 0° ... +60°CTape structure Magnetic tape stuck on with adhesive tape
External magnetic influenceExternal magnetic fields on the magnetic tape surface must not exceed 64 mT (640 Oe; 52KA/m) as this can damage or destroy the magnetic tape encoding
Protection class Carrier tape, stainless steel (optional)
Measuring display for series SLWM/QKM
Measuring display for series WKM/WKMEDR
Length measuring system WKMEX
Magnetic tape for measuring display WKM
-
S L W M - 1080
QKM-02-20 QKM-01-20
QKM-01-20QKM-02-20
SLWM-1080
Q K M - 01 - 20
962 963
drylin® | Digital measuring systems | Product range drylin® | Digital measuring systems | Product rangedrylin® digital
measuring systems
drylin® digital
measuring systems
3D CAD data, prices and delivery times www.igus.eu/drylin-measuringLifetime calculation, configuration and more www.igus.eu/drylin-measuring
Ready-to-install systems for external data outputIntegrated measuring system
Order key Order key
Line
ar m
odul
e dr
ylin
® S
LW
Mea
surin
g sy
stem
Inst
alla
tion
size
S
LW li
near
mod
ule
SizeType
Options01 = display fixed in place02 = display flexible with angle joint
Dimensions [mm] Dimensions [mm]Part No. M max. L B B1 B2 H H1 E Q ts f1 f2 A
[Nm] Carriage + stroke
h7
10 18 + 94 28 94 45 58 155 46 20 6.2 4.5 15.5 3310 18 + 94 28 94 45 58 92 46 20 6.2 4.5 15.5 33
Protected magnetic tape Attachment options using slot nuts Manual clamp on carriage Unsupported attachment Profile AWMQ-20 max. length 1,500 mm Sensor integrated in the carriage, saving space Technical data Page 960
Sensor integrated in the carriage, saving space Operation without mains supply Integrated magnetic tape Lubrication free operation Extensive accessories available Sensor integrated in the carriage, saving space Technical data Page 960 Technical data drylin® linear module SLW
Page 1086
H1
H
H1
f1f2
Q
L
B
A
B1
Ets
B2
Ø
Signal cable
Signal cable
Part No. A Al H E1 E2 E3 E4 l l2 lt tk kt ts s ha d2 h3 b
108 192 29 94 94 137 150 236 17 22 11 6.4 6.8 6.6 14.5 TR10x2 90 50
E4
E3
E2 s
kt
ts
tk
l + Messlänge
h3
b
Al
d2ha
ltlt
E1
A
H
l2
Squ
are
Mea
surin
g sy
stem
Met
ric
Car
riage
type
Inst
alla
tion
size
Option SizeType
-
WKM-10-80-15-01-L WK-10-80-15-01WKM-10-80-15-01-R WK-10-80-15-01WKM-20-80-15-01-L WK-20-80-15-01WKM-20-80-15-01-R WK-20-80-15-01
WKM-11-40
WKMEDR(L)90)-10-80-10-…
WMY-0301 61 125 40 14 ø5,4 22WMY-0302 94,5 92 70 14 ø5,4 22
WKMEDR - 10-80-10
964 965
drylin® | Digital measuring systems | Product range drylin® | Digital measuring systems | Product rangedrylin® digital
measuring systems
drylin® digital
measuring systems
3D CAD data, prices and delivery times www.igus.eu/drylin-measuringLifetime calculation, configuration and more www.igus.eu/drylin-measuring
H
E
H
E
WKM, Series 10 and 20
a1
C5C4
H
L
min. 6WS-10-40
C
Cm Kz
K1
C2
A2
K1
S A
Hm
a1
C5C4
H
L
min. 6WS-10-40
C
Cm Kz
K1
C2
A2
K1
S A
Hm
a1
C5C4
H
L
min. 6WS-10-40
C
Cm Kz
K1
C2
A2
K1
S A
Hm
Part No. drylin® linear profile 89) H E36 9336 9340 9340 93
Dimensions [mm]
89) Profile dimensions Page 785
Part No. L C4 C5 a1 C2 A2 K1 C A H S Cm Hm kzmax.
2,000 40 20 18 120 60 6.6 133 73 24 6 100 54 82
Dimensions [mm]
WKM, Series 11
Digital measuring systems with direct position readout
Lockable carriage Display optionally to the right (R) or left (L) of the guide carriage
Max. rail length 4,000 mm (effective measuring length max. 3,757 mm)
Technical data Page 960
Options for attaching the external display
Dimensions [mm]
Display dimensions [mm]
Energiekette
047.10.028.0.xxxnicht Bestandteil des Artikels
Ch
Ah
BhKh
Sh
Th
WMY-0301
Bh
Ch
Sh
Ah
Kh
WMY-0302
WKMEDL-10-80-10
WKMEDR-10-80-10
A
C
C2
A2
H2
Bm
Am
Tm
K2 (3x)
Energiekette
047.10.028.0.xxxnicht Bestandteil des Artikels
Ch
Ah
BhKh
Sh
Th
WMY-0301
Bh
Ch
Sh
Ah
Kh
WMY-0302
WKMEDL-10-80-10
WKMEDR-10-80-10
A
C
C2
A2
H2
Bm
Am
Tm
K2 (3x)Part No. A C A2 C2 K2 H2 Am Bm TmWidth Length ±0.17107 100 94 87 M6 24 82 51 25
Part No. Ah Bh Ch Sh Kh Th61 125 40 14 ø5.4 22
94.5 92 70 14 ø5.4 22
90) Suitable for attachment on the right (R) or left (L)
Energiekette
047.10.028.0.xxxnicht Bestandteil des Artikels
Ch
Ah
BhKh
Sh
Th
WMY-0301
Bh
Ch
Sh
Ah
Kh
WMY-0302
WKMEDL-10-80-10
WKMEDR-10-80-10
A
C
C2
A2
H2
Bm
Am
Tm
K2 (3x)
e-chain®047.10.028.0.xxxNot included
Measuring system with freely positionable readout display
Order key
dryl
in® W
m
easu
ring
syst
em
Exte
rnal
dis
play
Atta
ched
on
the
right
Inst
alla
tion
size
Rai
l wid
th
Rai
l len
gth
100
mm
SizeType
OptionsR = attachment to the right of the guide
carriageL = attachment to the left of the guide
carriage
-
WKMEX-10-80
000111
966
drylin® | Digital measuring systems | Product rangedrylin® digital
measuring systems
Lifetime calculation, configuration and more www.igus.eu/drylin-measuring
At 4 edge triggering (setting parameters of the display or control system, for example, IW4) and +20°C ambient temperature: resolution: ±(0.025 + 0.02 · L) L = measurement length in metres; repeatability: ±0.025 mm
At 1 edge triggering (setting parameters of the display or control system, for example, IW1) and +20°C ambient temperature: resolution: ±(0.1 + 0.02 · L) L = measurement length in metres; repeatability: ±0.025 mm
Small sensor with integrated evaluation electronics Output signals: differential mode sustained short circuit-proof with inverted signals (A. A/, B, B/, Z, Z/)
Further technical data Page 961
Ready-to-install systems for external data output
C2
A2 A
C
K2
Energy chain045.10.028.0Not part of the product
Part No. H2 C C2 A A2 K2 Resolution36 100 87 107 70 M6 0.1
Sensor type Nominal voltage Output power Max. length of signal cable10–30 V HTL 10–30 V 30 m10–30 V TTL Line Driver 50 m
5 V TTL Line Driver 10 m
Dimensions [mm]
Versions
H2