dryer-design parameters
DESCRIPTION
A presentation of dryer design parameters by Mr. Vishnu Prasad Yadav, Asst. Professor, ITGGV, BilaspurTRANSCRIPT
G_S [Y_1-Y_2]=L_S [X_1-X_2]
DRYERM.B.E.B.
DRYERE.B.Taking T0 as the reference temperature , The enthalpies of gas and solid streams are :
ZONE-IZONE-IIZONE-III1432M.B.E.B.
ZONE-IZONE-IIZONE-IIIWet solid enters zone I at rate of (Ls ) , kg/hr (dry basis)The surface area of drying is (a) , m2/(kg dry solid)E B
ZONE-IZONE-IIZONE-IIIWet solid enters zone I at rate of (Ls ) , kg/hr (dry basis)The surface area of drying is (a) , m2/(kg dry solid)
ZONE-IZONE-IIZONE-IIIThe moisture content of the solid is below critical moisture (X