drum and container pumps - oliver m. dean, inc. home page

INNOVATORS

IN FLOW TECHNOLOGY

DRUM AND

CONTAINER PUMPS

NEW now supplied with FLUX-Clip

daniele

CORRECT OMD LOGO

2

FLUX PUMPS: PERFECTION IN PUMPING

Do you want to transfer differing liquids quicklyand economically?Do you want to measure out varying quantities?Do you want to ensure total safety for the operator or theenvironment when pumping hazardous products?Do you want a pump which can cope even with peak loadings?FLUX drum and container pumps offer the high-tech designyou require.

Whenever liquids are pumped out of a drum or container,FLUX can supply a unit of unsurpassed quality: all FLUX pumpsare available in different materials. You can choose betweena pump with a mechanical seal or a sealless version. One ofthe unique features of both, the polypropylene and the PVDFmechanical seal version, is the steel cored inner tube providing,through increased lateral stability, a longer service life.Both, mixed centrifugal and axial impellers are availableto suit differing head and flow applications. And if you wantto combine the pumping and mixing operation FLUX also havethe pump you need.

Another feature is the FLUX quick assembly system. This allowsfor simple and speedy pump strip down.

Of course, FLUX pumps require a powerful and reliable drivemotor. A wide range of electric or compressed air motorsprovides a matched power unit throughout the pump range –even in hazardous locations or when pumping high flammabilityliquids. To complete the comprehensive FLUX program, a widerange of top class accessories is available – from protectionagainst emission of hazardous fumes through to the meteringof liquids.

A FLUX drum pump is always a "Two-Component-Team" consisting of adrive motor and a pump (tube set).Both component parts are universallyinterchangeable. For further detailsplease see page 10 onwards.

3

TABLE OF CONTENTS

Which material goes best with which liquid

Design concepts of FLUX drumand container pumps

FLUX drum pumps (pump tube sets) in stainless steel (S), aluminium alloy (AL)and Hastelloy C (HC) in detail,together with performance charts

FLUX drum pumps (pump tube sets)in polypropylene (PP) andpolyvinylidenfluoride (PVDF) in detail,together with performance charts

FLUX container pump (pump tube set)in polypropylene (PP) in detail,together with performance chart

FLUX quick action coupling to suit all FLUX drum and container pumps

FLUX motor data in detail

Summary of FLUX motor –pump combination

Outline of FLUX drum andcontainer pumps with accessories

Dimensions ofFLUX drum pumps and drive motors

The great range of FLUX pumps

4

5 – 9

10 – 13

14 – 17

18 – 19

20

21 – 31

32 – 33

34 – 35

36 – 37

38 – 39

3

Small clip, big effect!

For suspending the hand tap or discharge hose,

FLUX drum pumps are now suppliedwith the new FLUX-Clip.

Assembly is easy: just fit FLUX-Clip on to the outletnozzle of the pump and mount discharge hose.The FLUX-Clip allows for secure suspension of thehand tap in various positions.

The FLUX-Clip ensures the hand tap and dischargehose are safely stored and always ready for use.

Examples of different positions of suspension:

4

FLUX DRUM AND CONTAINER PUMPS –WHICH MATERIAL GOES BEST WITH WHICH LIQUID

*Zone 0 Area in which a hazardous and explosive atmosphereof gases, vapours or fogs exists permanently orfor a long period of time. In general such conditionsexist inside of drums or containers only.The following pump models are tested and certifiedaccording to Directive 94/9/EC-ATEX 100a,category 1/2, for transferring high flammabilityliquids out of portabledrums or containers in hazardous areas Zone 0:F 424 S – EC Type examination certificate

PTB 00 ATEX 4108 XF 425 S – EC Type examination certificate



PTB 00 ATEX 4110 XF 430 HC – EC Type examination certificate

PTB 00 ATEX 4110 X

Stainless steel 316 Ti (S) up to 248 °F

Suitable for high flammability liquids (up to temperatures of classT4) as well as for all neutral and non-flammable, thin liquids likesolvents, organic acids, dilute anorganic acids and alkalis.Certified for use in Zone 0*.Examples of suitable liquids: acetone, alcohol, ammonia, gasoline,flammable solvents, nitrocellulose varnishes, perchlorethylene,trichlorethylene, toluene, potassium hydroxide, sodium hydroxide,phosphoric acid (up to 60 %), sulphuric acid (up to 7,5 % andmore than 96 %), fruit juices, milk, salad oil and all liquids listedfor aluminium alloy.

Hastelloy C (HC) up to 248 °F

Specially designed for pumping alternatively high flammabilityand chemically aggressive liquids. Certified for use in Zone 0*.Examples of suitable liquids: hydrofluoric acid, aqua regia, oleum,hydrochloric acid (up to 30 %), sulphuric acid, various mixedacids and all liquids listed for aluminium alloy and stainless steel.

Aluminium alloy AlMg5 (AL) up to 212 °F

Suitable for neutral, low flammability liquids.Examples of suitable liquids: drilling emulsion, diesel oil, fuel oil, hydraulic oil, non-flammable solvents, liquid soap, liquid wax, water.

Polypropylene (PP) up to 122 °F

Suitable for both, chemically aggressive and neutral liquids,together with low flammability liquids such as acids and alkalis.Examples of suitable liquids: formic acid, ammonia, boric acid,chromic acid (up to 10 %), liquid fertilizers, acetic acid, photodevelopers, hydrofluoric acid (up to 70 %), fruit acids, potassiumhydroxide, copper chloride, lactic acid, sodium hydroxide, phosphoric acid, hydrochloric acid, sulphuric acid (up to 80 %),distilled water.

Polyvinylidenfluoride (PVDF) up to 212 °F

Suitable for both, chemically aggressive and neutral liquids,together with low flammability liquids such as acids and alkalis. Examples of suitable liquids: hydrobromic acid, chromic acid,chloric acid, hydrofluoric acid, sodium hypochlorite, nitric acid(up to 75 %), sulphuric acid and all liquids listed for polypropy-lene (except sodium hydroxide).

In selecting a pump model, please always checkmaterial of pump and material of seals for compatibility.

Due to the enormous variety and complexity of industrial chemicals, together with the range andvariation of FLUX products, we can only list some of all the suitable liquids. But we would be glad to sendyou a detailed Resistance Chart.

5

The liquids to be pumped areabrasive, but they do not leaveany deposits. Dry running of thepump must not cause any problems.You are looking for a lightweight,general purpose pump in stainlesssteel, polypropylene or poly-vinylidenfluoride.

The inner tube supports the pumpshaft, which is lubricated by theliquid. The level of the liquid in theinner tube always corresponds tothat in the drum or container.

Special advantages:

– Safe dry running of the pump– No wearing of seals– The liquid being pumped is not

contaminated by the shaft lubricant– Inner tube and helix shaped support

bearings completely self-draining

Here a FLUX pump in seallessversion is your pump.

Non-metallic helixshaped shaft supportbearing

Impeller in ETFE

Flexible couplingbetween motorand pump

Pressure relief ports

Bottom bearing assemblywhich centers the shaftwithin the inner tube

IN GOOD CONTACT WITH THE LIQUIDS:THE SEALLESS FLUX PUMP F424

O-ring to seal betweeninner and outer tube(not in the liquid section)

Radial shaft seals toprevent liquid and/orvapours entering thecoupling area

Type F 424 – perfectionin drum emptying

All FLUX drum pumpsare stripped for cleaningwith a minimum of effort.

NOTE

6

Type F 430 – perfectionin drum emptying

The pump must be used withmany varying liquids, conse-quently the smallest residual leftwithin the pump is unacceptable.You want to pump adhesive sub-stances like paints, or liquidswhich tend to crystallize orharden.

The inner tube houses the shaft.It is sealed at the bottom by amechanical seal through whichthe shaft passes. Consequentlythe shaft does not come intocontact with the liquid exceptfor the small section betweenthe impeller and seal.

Special advantages:– The shaft support bearings

are isolated from the liquid– Steel cored inner tube in PP

and PVDF pumps. This preventselongation of the plastics, even at high temperatures

– Extended service life throughwell proven seal design

Here a FLUX pump withmechanical seal is the best choice.

Steel cored inner tube inPP and PVDF provides theultimate in stability. Thiscore prevents elongationof the plastics at hightemperatures. This resultsin an extended service lifeof the mechanical seal

Packaging of themechanical seal and rotaryshaft seal adjacent to eachother ensures the maximumintegrity of the sealed inner tube

Flexible couplingbetween motor and pump

For all other applications bothdesigns – F 424 and F 430 –are equally suitable.

Impeller in ETFE

A SHAFT IN A SHELL: THE FLUX PUMP F430 WITH MECHANICAL SEAL

NOTE

7

Type F 425

You are not prepared to acceptany residual liquid in the drum in order to avoid problems andcosts of disposal or to avoidlosing high value liquids.

Before the motor is switched off,the flowback stop valve at thepump inlet must be closed byoperating the lever. This preventsthe liquid flowing back into theempty drum.

Special advantages:– Especially easy operating of

the pump– Optimum use of the liquids– Remains of less than 2 ounces

when drum is tilted

Here the FLUX F 425 foremptying drums up to 99,98 %is your pump.

Flexible couplingbetween pump and motor

Operating leversto close/openthe flowback stop valve


Flowback stop valve


Flowback stop valveclosedopen

Impeller in ETFE

MOST ECONOMICAL DELIVERY: THE FLUX PUMP F425FOR EMPTYING DRUMS UP TO 99,98%

NOTE

8

mixing pumping

Type F 426

You want to mix and pumpliquids within a closed drum oran open container.

By turning the adjusting lever, thepump can either mix or pump.Liquids can also be mixed evenwhen being transferred to anot-her container.

Special advantages:– No changes in the outer

diameter of the pump tube in stainless steel as the pumpworks without any additionalcomponents.

– Light and handy design.– Pump/drum connection glands,

also in vapour-proof version,are available

Here the FLUX mixingpump is the right pumpfor you.

Flexible couplingbetween pump and motor

Mixing openings


Adjusting lever to setthe pump to mixing ordischarge

Impeller in ETFE

AN EXCELLENT MIXTURE: THE FLUX MIXING PUMP F426


NOTE

9

Type F 427

You want a safe pumping of food, cosmetic or pharmaceuticalproducts. The operating condi-tions require an easy and quickcleaning or sterilization of thepump at regular intervals toavoid any contamination of theproduct, e.g. when pumpingvarying liquids or differentcolours as well as quick-dryingor film forming liquids.

The efficient FLUX sanitary pumphas been especially designed foraseptic applications.

Special advantages:– All wetted parts are made in

stainless steel, PTFE or ETFE– The pump can be quickly

stripped down for cleaningor sterilization

– Negligible wear by friction onseals and bearings

Here a FLUX sanitary pump isyour pump.

Shaft seal to prevent liquids and/or vapoursentering the couplingarea

Pressure relief ports

Closed bearing inPTFE assures safeguiding of the pump

Impeller in ETFE

Bottom bearing assemblywhich centers the shaftwithin the inner tube

For use with all FLUX models:Quick Action Coupling SSK 400allows a quick assembly/disas-sembly of motor and pump(not included with the pump –see page 20)

FLUX facilitates aseptic pumpingof delicate products. The sanitarypump can be stripped downwithin a few seconds because ofits ingenious design.The F 427 does not have anyinaccessible voids.This allows you to completelyclean the pump at any time.

PURE CULTURE IN PUMPING:THE FLUX SANITARY PUMP F427

Easy to strip down– Easy to clean!


NOTE

10

FLUX DRUM PUMPS IN STAINLESS STEEL

FLUX drum pumps in stainless steel 316 Ti –except sanitary pump F 427 S – are approvedaccording to Directive 94/9/EC-ATEX 100afor use in Zone 0, temperature class T4,for transferring high flammability liquids out ofportable drums or containers.

With the help of the performance charts youcan compare the delivery rates achieved byeach pump model powered by the variousFLUX motors. Detailed motor data are shownon pages 21 to 31.

When using the pump with a discharge hose(of approx. 6,5 ft) and a hand nozzle, thedelivery rate will be approx. 18 GPM.Depending on the motor type a 55 GAL drumcan be emptied within 3 – 4 minutes.The delivery rates shown in the performancecharts are obtained at the outlet connectionof the pump.

Special version for horizontal use on request.

Motor FBM 4000 Ex Motor F 417 or F 417 EL

Motor F 416 Ex, F 416-1 Ex or F 416-2 Ex

Detailed motor data see pages 21 to 31

F 416 Ex

F 457F 457 EL

F 414

F 417 F 417 EL

F 416-2 Ex

F 458F 458 ELF 458-1

Max. viscosity per pump and motor,please see pages 32 and 33.

This pump version will achievea higher delivery rate!

This pump version will achievea higher delivery head!

F 460 Ex-ULF 460 Ex ELF 460-1 Ex-UL

FBM 4000 Ex

F 42

4 S

-43/

38

11

Motor F 458-1 or F 460-1ExMotor F 457 or F 457 EL Motor F 458, F 458 EL, F460 Exor F 460 Ex EL

Values ± 10% with water (68 °F)

DRUM PUMP (TUBE SET) IN STAINLESS STEEL, THREAD ON OUTLET 1 1/4”BSP (TRI-CLAMP 1 1/2” ON F 427 S3A), WITHOUT MOTOR

Type/Curve F 425 S-41/34★ F 426 S-41/38 F 427 S3A-43/38

Version 99,98 % drum emptying Mixing pump Sanitary pump

Seal type mechanical seal in ceramic oxide, PTFE/carbon, sealless o-rings in FKM

Material shaft in stainless steel 316 Ti, seal in FKM, shaft in stainless steel 316 Ti,impeller in ETFE impeller in ETFE, o-ring in NBR

max. temperature 248 °F 248 °F

outer Ø 1 19/32” 1 19/32” 1 11/16”

Part No./Weight

Immersion length 27” 425 20 008/6,61 lbs – 427 20 207/6,61 lbs

Immersion length 39” 425 20 011/8,37 lbs 426 20 010/8,37 lbs 427 20 210/6,39 lbs


Type/Curve F 430 S-41/38 F 430 S-41/37 Z F 430 S-50/45 Z F 430 S-50/38

Version

Seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FKM

Material shaft in stainless steel 316 Ti, seal in FKM, impeller in ETFE

max. temperature 248 °F

outer Ø 1 19/32” 1 19/32” 2” 2”

Part No./Weight

Immersion length 27” 430 20 107/5,29 lbs 430 20 407/5,29 lbs 430 20 207/7,49 lbs 430 20 307/7,49 lbs



Pump models in immersion length of 8 – 118” (in steps of 4”) on request. * Model for higher delivery head on request.

Type/Curve F 424 S-43/38 F 424 S-43/37 Z F 424 S-50/45 Z

Version

Seal type sealless

Material shaft in stainless steel 316 Ti, impeller in ETFE, o-ring in FKM


outer Ø 1 11/16” 1 11/16” 2”

Part No./Weight




12

FLUX drum pumps in aluminium alloyAlMg5 are suitable for transferringneutral, low flammability liquids.

FLUX drum pumps in Hastelloy C areapproved according to Directive94/9/EC-ATEX 100a for use in Zone 0,temperature class T4, for transferringhigh flammability liquids out of portabledrums or containers. In addition,Hastelloy C is chemically resistant to mostof acids and alkalis, allowing the mostuniversal use of this pump type.

With the help of the performance chartsyou can compare the delivery ratesachieved by each pump model poweredby the various FLUX motors.Detailed motor data are shown on pages21 to 31.

When using the pump with a dischargehose (of approx. 6,5 ft) and a handnozzle, the delivery rate will be approx.18 GPM. Depending on the motor typea 55 GAL drum can be emptied within3 – 4 minutes.The delivery rates shown in the perfor-mance charts are obtained at the outletconnection of the pump.

FLUX DRUM PUMPS IN ALUMINIUM ALLOY OR HASTELLOY C

Detailed motor data see pages 21 to 31.

F 416 Ex

F 457F 457 EL

F 414

F 417 F 417 EL

F 416-2 Ex

F 458F 458 ELF 458-1


FBM 4000 Ex



F 43

0 A

L-41

/38

F 43

0 H

C-4

0/38

13

DRUM PUMP (TUBE SET) IN ALUMINIUM ALLOY, THREAD ON OUTLET 1 1/4”BSP, WITHOUT MOTOR

DRUM PUMP (TUBE SET) IN HASTELLOY C, THREAD ON OUTLET 1 1/4”BSP, WITHOUT MOTOR

Type/Curve F 430 HC-40/38

Version

Seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FFKM

Material shaft in Hastelloy C, seal in FFKM, impeller in ETFE

max.temperature 248 °F

outer Ø 1 9/16”

Part No./Weight

Immersion length 27” 430 30 107/5,07 lbs



Other immersion lengths on request.

Type/Curve F 430 AL-41/38 F 430 AL-41/37 Z F 430 AL-50/38

Version

Seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in NBR

Material shaft in stainless steel 316 Ti, seal in NBR, impeller in ETFE

max.temperature 212 °F

outer Ø 1 19/32” 1 19/32” 2”

Part No./Weight




Pump models in immersion length of 8 – 78” (in steps of 4”) on request.






14

FLUX drum pumps in polypropylene areused for both, chemically aggressive andlow flammability liquids such as acidsand alkalis, together with most thin andneutral liquids.


When using the pump with a dischargehose (of approx. 6,5 ft) and a handnozzle, the delivery rate will be approx.18 GPM. Depending on the motor typea 55 GAL drum can be emptied within3 – 4 minutes.The delivery rates shown in the perfor-mance charts are obtained at the outletconnection of the pump.

Special version for horizontal use onrequest.

FLUX DRUM PUMPS IN POLYPROPYLENE

F 416 Ex

F 457F 457 EL

F 414

F 417 F 417 EL

F 416-2 Ex

F 458F 458 ELF 458-1


FBM 4000 Ex







F 43

0 PP

-40/

33

15

DRUM PUMP (PUMP TUBE SET) IN POLYPROPYLENE, THREAD ON OUTLET 11/4”BSP , WITHOUT MOTOR

Type/Curve F 424 PP-41/36 F 424 PP-41/35 Z F 424 PP-50/38 F 424 PP-50/43 Z

Version

Seal type sealless

Material shaft in Hastelloy C, impeller in ETFE, o-ring in FKM


outer Ø 1 19/32” 1 19/32”) 2” 2”

Part No./Weight




Type/Curve F 430 PP-40/33 F 430 PP-40/33 Z F 430 PP-50/43 Z F 430 PP-50/38

Version


Material shaft in Hastelloy C, seal in FKM, impeller in ETFE


outer Ø 1 9/16” 1 9/16” 2” 2”

Part No./Weight




Pump models in immersion length of 8 – 118” (in steps of 4”) on request.

Type/Curve F 425 PP-50/34 F 426 PP-50/33

Version 99,98 % drum emptying Mixing pump




outer Ø 2” 2”

Part No./Weight

Immersion length 27” 425 40 048/3,53 lbs -

Immersion length 39” 425 40 051/4,41 lbs 426 40 001/3,97 lbs

Immersion length 47” 425 40 053/5,07 lbs 426 40 002/4,63 lbs



16

FLUX drum pumps in polyvinyliden-fluoride are used for both, chemicallyaggressive and low flammability liquidssuch as acids and alkalis, together withmost thin and neutral liquids.


When using the pump with a dischargehose (of approx. 6,5 ft) and a handnozzle, the delivery rate will be approx.18 GPM. Depending on the motor typea 55 GAL drum can be emptied within3 – 4 minutes.

The delivery rates shown in the perfor-mance charts are obtained at the outletconnection of the pump.

FLUX DRUM PUMPS IN POLYVINYLIDENFLUORIDE




F 416 Ex F 416-2 Ex


FBM 4000 Ex




F 457F 457 EL

F 414

F 417 F 417 EL

F 458F 458 ELF 458-1

F 42

4 PV

DF-

41/3

6

17

DRUM PUMP (TUBE SET) IN POLYVINYLIDENFLUORIDE, THREAD ON OUTLET G11/4” BSP, WITHOUT MOTOR

Type/Curve F 424 PVDF-41/36 F 424 PVDF-41/35 Z F 424 PVDF-50/38

Version

Seal type sealless

Material shaft in Hastelloy C, impeller in ETFE, o-ring in FKM


outer Ø 1 19/32” 1 19/32” 2”

Part No./Weight




Type/Curve F 430 PVDF-40/33 F 430 PVDF-40/33 Z F 430 PVDF-50/43 Z F 430 PVDF-50/38

Version




outer Ø 1 9/16” 1 9/16” 2” 2”

Part No./Weight




Pump models in immersion length of 8 – 118” (in steps of 4” mm) on request.



18

FLUX CONTAINERPUMP IN POLYPROPYLENE

The powerful, extremely lightweight and easy-to-handle solution for transferring corrosiveacids and alkalis and almost every thin, lowflammability liquid out of larger containers:FLUX container pump type F 430 PP-100/50in polypropylene. Especially designed foremptying 1000-L-Containers, this pump providesthe high safety and ease of handling you doappreciate on FLUX drum pumps.

The use of this pump allows to dispense withfloor drains, minimizing leakage risks andeliminating residual liquid within suction pipesand subsequent handling cost. A compressiongland or a vapour-proof gland always securesthe pump in a vertical position within the domeof the container.

With the help of the performance chart you cancompare the delivery rates achieved by thecontainer pump powered by motors type F 457,F 458-1 or F 414. Detailed motor date areshown on pages 21 – 31.

Depending on the motor type, this pump willachieve a maximum delivery rate of 28 GPMand a maximum delivery head of 105 ft liquidcolumn in transferring liquids up to a maximumviscosity of 150 cP.

F 457

F 414

F 458-1

FLUX Container PumpF 430 PP-100/50in combination with

= Commutator motor Type F 457/F 458-1

= Three-phase gearmotor Type F 414

1

2

Detailed motor datasee pages 21 to 31

Values ± 10 % with water (68 °F)

F 43

0 PP

-100

/50

19

CONTAINER PUMP (TUBE SET) IN POLYPROPYLENE, THREAD ON OUTLET G11/4” BSP, WITHOUT MOTOR

Type F 430 PP-100/50

Version


Material shaft in Hastelloy C, seal in FKM, impeller in polypropylene


outer Ø 4”

Part No./Weight




Accessories for fixing the pump onto the container Part No.

Screw cap DN 150 001 14 063

Screw cap DN 225 001 14 064

in connection with FLUX vapour-proof gland, consisting of:

Valve part (PP) Ø 7” 001 14 243

Threaded ring (PP) G 2” female 001 14 238

Dimensions a b

Immersion length 39” 40” 43”



Ø 4”

2,5”

20

FLUX QUICK ACTION COUPLING SSK 400

FLUX Quick Action Coupling Type SSK 400suits all FLUX drum and container pumpsType F 424, F 425, F 426, F 427 and F 430and allows a quick assembly/disassembly of pump and motor within a few secondsonly. This allows the use of several pump tubesets with one drive motor only.

The quick action coupling SSK 400 consistsof a clamping element which is mountedonto the pump tube set and a threaded ringwhich is screwed onto the drive motor.

Type Part No.

Quick Action Coupling consisting of threaded ring (motor side) and 001 10 802SSK 400 complete clamping element (pump side)

or as individual parts:

Threaded ring to be screwed onto the drive motor 001 10 800

Clamping element to be mounted onto the pump tube set 001 10 804

2121

FLUX BRUSHLESS MOTOR FBM 4000 EX

Drum and Container Pumps are used in almost every sectorof the processing and manufacturing industries.Initially designed for decanting and transfer operations ofdiffering liquids from drums and containers, current productiontime scales are now requiring these pumps to be used onapplications with extended run times and frequent stoppingand starting.

These, more ardous uses, are exactly the applications the newbrushless motor Type FBM 4000 Ex has been designed for.For either continuous or intermittent use, or even precisedispensing operations: the new brushless motor is ideally suited.

The brushless motor Type FBM 4000 Ex is featuring a compactdesign, a robust double shell housing in aluminium and a verylow noise level. The explosion-proof motor is tested and certifiedaccording to the latest Directive 94/9/EC-ATEX 100a.EC-Type-Examination Certificate PTB 03 ATEX 1042.The combined on/off switch and easy to use speed controllerallow precise dispensing operations.Electronic monitoring of speed, voltage and temperature.A no-volt release safety circuit monitors the power and preventsunintentional re-start of the pump. This feature ensures additionalsafety for the user.Due to negligible wear, the brushless motor design guaranteeslowest cost of ownership, even with continuous use.

Brushless motor, explosion-proof to II 2 G EEx de IIC T6,protection class I.

Jet-proof according to IP 55.With 16 ft. power cord and safety plug (not explosion-proof).

with no voltrelease safetycircuit

Typ Capacity Voltage Frequency Weight Part No.Version

FBM 4000 Ex 600 W 230 V 50-60 Hz 13,66 lbs 400 01 000

BRUSHLESS MOTOR, EXPLOSION-PROOF, CERTIFIED ACCORDING TO DIRECTIVE 94/9/EC – 100a

Accessories see page 23.

NEW

FBM 4000 Ex

2222

FLUX COMMUTATOR MOTOR F 460 EX IN DETAIL

Explosion-proof commutator motor Type F 460 Ex featuringa compact design, a robust double shell housing in aluminiumand a very low noise level. Tested and certified according toDirective 94/9/EC-ATEX 100a.EC-Type-Examination Certificate PTB 97 ATEX 1035.An improved ventilation system provides optimal coolingand ensures an extended service life.

Commutator motor, explosion-proof to II 2 G EEx de IIC T6,protection class I in 120 Volt, 60 Hz and 230 Volt, 50-60 Hz.protection class III in 24 or 12 Volt, DC.

120V, 60 Hz version UL-listed, File No. E67399, class I,group C + D.

Jet-proof according to IP 55.With 16 ft. power cord without plug.

Type F 460 Ex EL, 230 Volt, 50 Hz with infinitely variable speedcontrol included in the switch knob for an easy control of thedelivery rate.

The commutator motor Type F 460-1 Ex is identical with Type F 460 Ex,but has a considerably higher capacity of 700 Watt.This model is recommended for applications requiring a higher deliveryrate or when transferring medium viscosity products or liquids with ahigher density.

Commutator motor, explosion-proof to II 2 G EEx de IIC T6, protection class I in 120 Volt, 60 Hz and 230 Volt, 50-60 Hz.

120V, 60 Hz version UL-listed, File No. E67399, class I, group C + D.

Jet-proof to IP 55.With 16 ft. power cord without plug.

F 460 Ex (pict.)F 460 Ex EL

F 460-1 Ex

2323

Earth (ground) wire 6,6 ft long 931 90 008with crocodile clip 6,6 ft long, reinforced version 931 90 015

9,8 ft long 931 90 013

Accessories Part No.

Carrying handle allowing easy immersion and removal of the pump in combination 001 10 557with commutator motors Type F 460 Ex, F 460 Ex EL, F 460-1 Exor FBM 4000 Ex.

Capacity Voltage Frequency WeightPart No.

Version

460 W 230 V 50 – 60 Hz 11,24 lbs – 460 00 026

460 W 120 V 60 Hz 11,24 lbs – 460 00 031

410 W 24 V DC 11,24 lbs – 460 00 003

230 W 12 V DC 11,24 lbs – 460 00 004

230 W 230 V 50 Hz 11,24 lbs 460 00 028 –

700 W 120 V 60 Hz 13,00 lbs – 460 01 024

700 W 230 V 50 – 60 Hz 13,00 lbs – 460 01 001

with variable without variablespeed control speed control

Type

F 460 Ex

F 460 Ex UL

F 460 Ex

F 460 Ex

F 460 Ex EL

F 460-1 Ex UL

F 460-1 Ex

COMMUTATOR MOTOR, EXPLOSION-PROOF, CERTIFIED ACCORDING TO DIRECTIVE 94/9/EC – ATEX 100a

2424

Commutator motor Type F 458 featuring a compact design, a robust double shell housing in aluminium and a very low noise level. An improved ventilation system provides optimal cooling and ensures an extended service life.Totally enclosed, fan cooled motor design and special corrosion-resistant painting, making these models particularly suitable foruse in corrosive, vapour laden atmospheres.

Commutator motor, protection class I in 120 Volt, 60 Hz and230 Volt, 50 – 60 Hz.Protection class III in 24 and 12 Volt.

120V, 60 Hz version approved to CSA standards,File No. LR 39984-7.

Jet-proof according to IP 55. With 16 ft. power cord. 120 Volt, 60Hz and 230 Volt,50-60 Hz version with safety plug. 24 and 12 Volt versionwithout plug.

Type F 458 EL, 230 Volt, with infinitely variable speed controlincluded in the switch knob for an easy control of the deliveryrate.

F 458 (pict.)F 458 EL

The commutator motor Type F 458-1 is identical with Type F 458,but has a considerably higher capacity of 700 Watt.This model is recommended for applications requiring a higherdelivery rate or when transferring medium viscosity productsor liquids with a higher density.

Commutator motor, protection class I in 120 Volt, 60 Hz and230 Volt, 50 – 60 Hz.


Jet-proof according to IP 55.With 16 ft. power cord and safety plug.

F 458-1

FLUX COMMUTATOR MOTOR F 458

2525

For transfering high flammability liquids and for use in hazardous areasexplosion-proof motors must be used.

Carrying handle allowing easy immersion and removal of the pump in combination 001 10 557with commutator motors Type F 458, F 458 EL or F 458-1


COMMUTATOR MOTOR, JET-PROOF, WITH SPECIAL CORROSION-RESISTANT PAINTING

NOTE


Version

460 W 230 V 50 – 60 Hz 11,24 lbs – 458 00 025

460 W 120 V 60 Hz 11,24 lbs – 458 00 026

410 W 24 V DC 11,24 lbs – 458 00 003

230 W 12 V DC 11,24 lbs – 458 00 004

460 W 230 V 50 Hz 11,24 lbs 458 00 027 –

700 W 120 V 60 Hz 13,00 lbs – 458 01 021

700 W 230 V 50 – 60 Hz 13,00 lbs – 458 00 020


Type

F 458

F 458 CSA

F 458

F 458

F 458 EL

F 458-1 CSA

F 458-1

2626

Commutator motor Type F 417 featuring a compact design,an optimal cooling system, a low noise level and an extended service life.Extremely light-weight and easy to handle, allowing a mostuniversal use with neutral, corrosive, non flammable liquids.

Commutator motor in 120 Volt, 60 Hz and 230 Volt, 50-60 Hz.Double insulated according to protection class II, with integralthermal cut-out switch.


Splash-proof according to IP 24.With 16 ft power cord and 2-pole plug.

Type F 417 EL with infinitely variable speed control device foran easy control of the delivery rate.

F 417F 417 EL (pict.)

Powerful commutator motor Type F 457 featuring a compact design, an optimal cooling system, a low noise level and an extended service life.Extremely light-weight and easy to handle, allowing a mostuniversal use with neutral, corrosive, non flammable liquids.

Commutator motor in 120 Volt, 60 Hz and 230 Volt, 50-60 Hz.Double insulated according to protection class II, with integralthermal cut-out switch.

Splash-proof according to IP 24.With 16 ft power cord with 2-pole plug.

Type F 457 EL with infinitely variable speed control devicefor an easy control of the delivery rate.F 457 (pict.)

F 457 EL

FLUX COMMUTATOR MOTORS F 417 AND F 457

2727


Version

450 W 120 V 60 Hz 5,29 lbs 417 01 606 –

450 W 120 V 60 Hz 5,29 lbs – 417 01 605

450 W 230 V 50 – 60 Hz 5,29 lbs – 417 01 700

450 W 230 V 50 – 60 Hz 5,29 lbs 417 01 701 –

800 W 120 V 60 Hz 8,82 lbs – 457 01 000

800 W 120 V 60 Hz 8,82 lbs 457 01 001 –

800 W 230 V 50 – 60 Hz 8,82 lbs – 457 01 037


Type

F 417 EL CSA

F 417 CSA

F 417

F 417 EL

F 457 CSA

F 457 EL

F 457

800 W 230 V 50 – 60 Hz 8,82 lbs 457 01 003 –F 457 EL

COMMUTATOR MOTOR, EXTREMELY LIGHT-WEIGHT AND EASY TO HANDLE

For transfering high flammability liquids and for use in hazardous areasexplosion-proof motors must be used.

NOTE

Carrying handle allowing easy immersion and removal of the pump in combination 001 10 533with commutator motors Type F 417, F 417 EL, F 457 or F457 EL


2828

The robust three-phase gearmotor F 414 is especiallydesigned for extreme operating conditions and extendedoperating periods.

Three-phase gearmotor, 230/400 Volt, 50 Hz,protection class I, jet-proof to IP 55.

Capacity: 0,55, 0,75 or 1,1 kW.

Available with motor protection switch or with cable terminal box.

Without power supply cable.

F 414

FLUX THREE-PHASE GEARMOTOR F 414


Motor F 414 in combination withpump tube sets in stainless steel

Motor F 414 in combination with pump tube sets in PP or PVDF

Motor F 414 in combination with pumptube sets in Aluminium or Hastelloy C

2929

0,75 kW 230/400 V 50 Hz 1,5 – 2,5 A 25/23 lbs 414 01 123 414 01 122

0,55 kW 230/400 V 50 Hz 0,9 –1,6 A 19/18 lbs 414 01 112 414 01 110

1,1 kW 230/400 V 50 Hz 2,4 – 3,5 A 28/26 lbs 414 01 131 414 01 130

with motor protection without motorswitch, mounted protection switch, with

on the motor cable terminal box

Range ofType Capacity Voltage Frequency setting motor Weight Part No.

protection switch Version

F 414

F 414

F 414

THREE-PHASE GEARMOTOR, JET-PROOF TO IP 55

allowing an easy immersion and removal of the pump 001 10 527

Power cord 16 ft, complete with 5-pole plug 934 08 020

Power cord 16 ft, without plug 934 08 025

Plug 5-pole 937 01 014


Carrying handle

3030

In combination with air motors FLUX drum and container pumpsare very lightweight, easy to handle and extremely powerful at the same time.FLUX air motors are explosion-proof according to Directive94/9/EC – ATEX 100a. PTB Registration No. 02 ATEX D022.These motors are recommended for transferring high flammability liquids and are particularly suitable for applications requiringa powerful and easy to adjust motor.The speed can be adjusted via the filter-regulator-lubricator uniton models F 416 Ex and F 416-1 Ex or on a ball valve on modelF 416-2 Ex.

Compressed air motor, explosion-proof to II 2 G cp IIC T6.Power 470 Watt at 86 psi operating pressure.Power 170 Watt at 43 psi (minimum operating pressure).

Easily variable speed control by adjusting either theair supply pressure or volume.Motor overload-proof.Air connection BSP 1/4” female.

Low noise level by a muffler.An optional exhaust air hose and filter is available to preventthe lubricating oil contaminating the environment.

F 416 Exwith triggeroperated valve

F 416-1 Exwithout valve F 416-2 Ex

with ball valve

FLUX AIR MOTORS F 416 EX

3131

Capacity Operating Air Version Weight Part No.pressure max. consumption

470 W 86 psi 17 cfmwith trigger

3,10 lbs 416 00 122operated valve

470 W 86 psi 17 cfm with ball valve 2,20 lbs 416 00 030

Type

F 416-1 Ex

F 416 Ex

F 416-2 Ex

AIR MOTOR, EXPLOSION-PROOF

consisting of water separator, pressure gauge and lubricator. Thread on inlet and outlet BSP 1/4“ female

001 10 100

CompressedDN 10, electrically conductive (blue) 001 10 098air hose

Hose coupling brass, spring-actuated, with hose nozzle DN 10 for compressed air hose 959 13 066

Hose nozzle brass, DN 10 – BSP 1/4“ male for compressed air hose 959 05 022

Nipple brass, DN 10 – BSP 1/4“ male for hose coupling 959 13 065

Earth (ground) 6,6 ft long 931 90 008wire with 6,6 ft long, reinforced version 931 90 015crocodile clip 9,8 ft long 931 90 013


Filter-regulator-lubricator unit

470 W 86 psi 17 cfm without valve 2,00 lbs 416 00 125

3232

Motor Type

Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosityrate* head** max. rate* head** max. rate* head** max.GPM ft cP GPM ft cP GPM ft cP

29 57 1000 26 46 1000 30 62 900

58 36 800 53 31 800 58 39 700

58 36 800 53 31 800 58 39 700

32 75 800 34 62 900 38 82 900

58 36 800 53 31 800 58 39 700

29 57 1000 26 46 1000 30 62 900

29 26 800 30 26 800 30 33 900

32 75 800 34 62 900 38 82 900

58 36 800 53 31 800 58 39 700

58 36 800 53 31 800 58 39 700

58 36 800 53 31 800 58 39 700

29 57 1000 26 46 1000 30 62 800

58 36 800 53 31 800 58 39 700

22 51 1000 22 49 1000 24 66 900

42 34 800 45 31 800 50 39 900

29 26 800 24 23 1000 29 33 900

58 36 800 53 31 800 58 39 700

28 98 1000 25 75 1000 29 92 900

22 51 1000 22 49 1000 24 66 900

46 36 800 45 31 800 50 39 900

58 36 800 53 31 800 58 39 700

33 98 1000 25 75 1000 29 92 900

42 34 800 45 31 800 50 39 900

58 36 800 53 31 800 58 39 700


Pump tube set Type

F 430 S-41/37 Z

F 430 S-41/38

F 430 S-50/38

F 430 S-50/45 Z

F 424 S-43/38

F 424 S-43/37 Z

F 424 S-50/45 Z

F 430 PP/PVDF-50/43 Z

F 430 PP/PVDF-50/38

F 430 PP/PVDF-40/33 Z

F 430 PP/PVDF-40/33

F 430 HC-40/38

F 430 AL-50/38

F 430 AL-41/37 Z

F 430 AL-41/38

F 427 S3-43/38

F 426 S-41/38

F 425 S-41/34

F 426 PP-50/33

F 425 PP-50/34

F 424 PP-50/43 Z

F 424 PP/PVDF-50/38

F 424 PP/PVDF-41/35 Z

F 424 PP/PVDF-41/36

FBM 4000 Ex F 458 F 460 ExF 458 EL F 460 Ex EL F 458-1 F 460-1 Ex

CAPACITY RANGE

3333

Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosityrate* head** max. rate* head** max. rate* head** max. rate* head** max.GPM ft cP GPM ft cP GPM ft cP GPM ft cP

30 39 1000 32 79 1200 25 39 800 32 66 1000

49 36 900 63 43 1000 48 25 600 58 39 800

49 36 900 63 43 1000 48 25 600 58 39 800

42 69 1000 38 98 1200 30 56 800 40 85 900

49 36 900 63 43 1000 48 25 600 58 39 800

30 39 1000 32 79 1200 25 39 800 32 66 1000

26 23 1000 34 43 1200 26 20 800 32 36 900

42 69 1000 38 98 1200 30 56 800 40 85 900

49 36 900 63 43 1000 48 25 600 58 39 800

49 36 900 63 43 1000 48 25 600 58 39 800

49 36 900 63 43 1000 48 25 600 58 39 800

30 39 1000 32 79 1200 25 39 800 32 66 1000

49 36 900 63 43 1000 48 25 600 58 39 800

24 36 1000 26 79 1200 21 39 800 24 66 1000

38 33 1000 54 43 1200 40 25 800 50 39 800

24 26 1000 29 39 1200 21 20 800 32 36 1000

49 36 900 63 43 1000 48 25 600 58 39 800

28 69 1000 28 98 1200 21 56 800 29 98 900

24 36 1000 26 79 1200 21 39 800 24 66 1000

38 33 1000 54 43 1200 40 25 800 50 39 800

49 36 900 63 43 1000 48 25 600 58 39 800

28 69 1000 28 98 1200 21 56 800 29 98 900

38 33 900 54 43 1200 40 25 800 50 39 800

49 36 900 63 43 1000 48 25 600 58 39 800

* Maximum delivery rate with free outlet; obtained on the outlet connection.** Maximum delivery head with closed outlet; obtained on the outlet connection.

F 414 F 416 Ex F 416-1 ExF 416-2 Ex F 417 F 417 EL F 457 F 457 EL

3434

It is not merely the pump that makes the FLUX solution a perfect equipment. On this page you will find a general view on theexplosion-proof FLUX drum pump together with all accessories for transfering high flammability liquids. With all items in boldprinting you will have a ready to use pump assembly, which may be completed by other accessories shown on this page.

1

2

3

4

5

6

7

8

Drive Motor

Drum Pump (pump tube set)

FLUX-Clip

Suction strainer

Compression gland

Fume gland

Flexible hose*

Swaged hose fittings*

Quick action tap9

10

11

12

13

14

15

16

17

Discharge spout

Liquid meter

Connecting piece FMC 100

Carrying handle

Earth (ground) wire

Explosion-proof plug

Explosion-proof socket

Wall bracket

* On request also available completely mounted

and tested for electrical conductivity.

GENERAL VIEW FLUX DRUM AND CONTAINER PUMP WITH ACCESSORIESFOR HIGH FLAMMABILITY LIQUIDS (EXPLOSION-PROOF VERSION)

1

2

3

4

56

78

9

10

11

12

13 14

16

15

8

17

3535

It is not merely the pump that makes the FLUX solution a perfect equipment. On this page you will find a general view on theFLUX drum pump together with all accessories for transfering non-flammable liquids. With all items in bold printing you willhave a ready to use pump assembly, which may be completed by other accessories shown on this page.

1

2

3

4

5

6

7

8

Drive Motor

Drum Pump (pump tube set)

FLUX-Clip

Suction strainer

Compression gland

Fume gland

Hose connection

Flexible hose*

9

10

11

12

13

14

15

16

Hose clip

Quick action tap

Discharge spout

Liquid meter

Carrying handle

Quick action coupling Type SSK 400

Attachment clamp

Wall bracket

GENERAL VIEW FLUX DRUM AND CONTAINER PUMPWITH ACCESSORIES FOR NON-FLAMMABLE LIQUIDS

1

2

3

4

56

7

910

11

12

13

14

1615

89

36

DIMENSIONS

F 417/F 417 EL F 458/F 458 EL/F 458-1/F 460 Ex/F 460 Ex EL/F 460-1 Ex/FBM 4000 Ex

F 416 Ex

F 457/F 457 EL

F 416-2 ExF 416-1 Ex

4”2 11/16”

4 11/16”11

1 /2”

8 5/16”

4 11/16”9”

7”

4 11/1

6”

2 11/16”

4”

8 1/2”6 11/16”

7 11/1

6”

8 7 /

8”

F 414

with motor and pumpassembled, the total lengthreduces by 5/8”.

NOTE

Capacity X Y Øz

0,55 kW 8” 11” 5 19/32”

0,75 kW 8 1/2” 12” 6 3/16”

1,1 kW 8 1/2” 12” 6 3/16”

Type F 414

37

DIMENSIONS

F 424 S/PP/PVDFF 427 S3

F 425 PP-50/34F 425 S-41/34

F 426 S-41/38 F 430 S/AL/HC/PP/PVDFF 426 PP-50/33

For example: Type F 430 S-41/38 with an immersion length of 39”has a total length (shown as dimension „b“) of 42 1/2”.The total length of the pump including motor type F 460 Ex is 42 1/2” + 11 1/2” = 54”.

IL: Immersion length

Type F 424 S/PP/PVDF and F 427 S3 F 425 S-41/34 F 425 PP-50/34

Dimensions Ø a b a b c a b c

Immersion length 27” 28” 31” 32” 35” 29” 32” 35” 28 1/2”

Immersion length 39” 40” 43” 44” 47” 41” 44” 47” 40 1/2”

Immersion length 47” 48” 51” 52” 55” 49” 52” 55” 481/2”

on models PP/PVDF-41/35 Z, dimen- with open valve dimensions with open valve dimensionssions a and b are reduced by 3/16”. a and b are increased by 17/64”. a and b are increased by 3/16”.

S: 111/16” or 2”

PP/PVDF:

119/32” or 2”

Type F 426 S-41/38 F 426 PP-50/33 F 430 S/AL/HC/PP/PVDF

Dimensions a b c d e a b c Ø a b

Immersion length 27” – – – – – – – – 28” 31”

Immersion length 39” 43 1/2” 46 1/2” 40” 14” 8” 43 1/2” 46 1/2” 40” 40” 42 1/2”

Immersion length 47” 51 1/2” 54 1/2” 48” 14” 8” 511/2” 54 13/32” 48” 47 1/2” 50 1/2”

S/AL: 119/32” or 2”

HC: 19/16”

PP/PVDF: 19/16” or 2”

(use

able

IL)

(use

able

IL)

(use

able

IL)

Posi

tion:

pum

ping

2 3/16”–21/2” 2 3/16” 2 1/2”

2 3/16” 2 1/2”

113 /32”

113 /32”

13”

2 3/16”–2 1/2”

3838

FLUX ACCESSORIES & COMPLEMENTS

It is not merely the pump that makes the FLUX solutiona perfect equipment. FLUX Pump Kits include everythingfor that quick start required by todays busy engineersand buyers: a ready to work, straight out of the box pump.All component parts – pump, motor and accessories –are carfully selected to complement each other.FLUX Pump Kits are available for:- acids and alkalis- concentrated acids and alkalis- petroleum products- high flammability liquids- universal applications- 99,98% barrel emptyingSelect the most suitable combinationand see the advantages of buyinga FLUX Pump Kit, the newall-inclusive service!

If you want to keep your liquids under control,FLUX drum and container pumps can becompleted by a Liquid Meter Type FMC 100.Various models are available in PP, ETFE orstainless steel for flowrates of 10 – 100 l/min.An easy-to-read 7-digit LCD unit togetherwith multifunctional keys ensures a simplecalibration and input, everything for easyuse by the operator.All models are explosion-proof toII 2 G EEx ia IIB T6 according toDirective 94/9/EC-ATEX 100a.

For detailed information on FLUX Pump Kits, FLUX Liquid Meters and other FLUX products please ask for our sales brochures.Just fill in the form on the following page and return it by FAX.

3939

THE GREAT RANGE OF FLUX PUMPS

YES! I am interested in top class pump technology.Please send the following catalogues:

FLUX JUNIORFLUX

FLUX PUMP KITS

FLUX LIQUID METERS

FLUX HIGH VISCOSITY LIQUID PUMPS

FLUX CENTRIFUGAL IMMERSION PUMPS

FLUX AIR-OPERATED DIAPHRAGM PUMPS

Mr / Mrs

Company

Address

Telephone Fax

e-mail

Please mark with a cross, complete the address and then sent us a fax. Fax number see on the back side!

INNOVATORS

IN FLOW TECHNOLOGY

All around the globe, FLUX is synonymous with top standards in pump technology. Whether it is barrel pumps, high viscosityliquid pumps, vertical centrifugal immersionpumps, air-operated diaphragm pumps, liquidmeters, mixers or top class accessories –FLUX with its complete and comprehensiverange is always the one to address to.Benefit from our competence.We look forward to hearing from you!

FLUX PUMPS CORPORATION4330 Commerce Circle, Atlanta, GA 30336Phone: (404) 691-6010 · Fax (404) 691-6314

1-800-for-FLUXwww.flux-pumps.com

F400

076

/7 U

SA

Distributed by

drum and container pumps - oliver m. dean, inc. home page

Documents