drucklufttechnik otto nemec · input: m16 x 1,5 ag output: g 5/8 ´´ ig, din 300 bar d- 04- 06...

DON-Drucklufttechnik s.r.o.

Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: [email protected]

- 1 -

Catalogue Spare parts illustrated in catalogue can be ordered through e-Mail adress [email protected] and with former price offer. By ordering a filling ramps, compressors and HP reservoirs the firma DON reserve yourself a delivery period up to 28 calender days. Installing and putting the facility into operation is ussualy icluded in delivery, but it will be a part of writting contract. Delivery period for all others parts is 10 working days. The physical functionality of planned facilities we can present them (not binding) by visiting our work-room after former agreement.

Used shortcut: EL Electronics GK Large conic KK Short conic LP Low press HP High press PL Pressed air TPA Technical pressure revision IG Internal thread AG External thread

mailto:[email protected]



- 2 -

D- 01- 01 Valve RGS GK Input: G ¾ ´´ AG Output: G 5/8 ´´ IG DIN 200 / 300 bar

D- 01- 02 Valve RGS KK Output: G 5/8 ´ IG DIN 200 / 300 bar

D- 01- 03 Protection valve Input: without / with sinter filter A B

D- 01- 04 Valve RGS Input: M18 x 1,5 AG Output: G 5/8 ´´ IG DIN 200 / 300 bar



- 3 -

D- 01- 05 Valve for composit tank 6,8 L Input: M18 x 1,5 AG Output: G 5/8 ´´ IG DIN 300 bar

D- 01- 06 Round Valve for 50 L PL tank Input: G ¾ ´´ AG Output: G ¼ ´´ IG DIN 350 bar

D- 01- 07 Round filling valve for panel Input: G ¼ ´´ IG Output: G ¼ ´´ IG Mounting: M32 x 1,5 AG



- 4 -

D- 01- 08 Filling valve for hose Input:, with deaerating (without gauge)

D- 01- 09 Flip filling valve with deaerating DIN 200 / 300 bar

D- 01- 10 Ball valve - rustless – 2 way Mounting hole Ø 20,4, Ø 6 / 8 mm tube

D- 01- 11 Ball valve - rustless – 3 way Mounting hole Ø 20,4

Ø 6 / 8 mm tube



- 5 -

D- 01- 12 Deaerat valve - swiveling Mounting hole Ø 20,4 Input: M14 x 1,5 IG Output: hose Ø6 mm (inside thread)

D- 01- 13 Seat for deaerat valve

D- 01- 14 Repair set for filling valve (belong to D0-1-06)

D- 01- 15 Repair set for Flip filling valve



- 6 -

D- 01- 16 Wrench for repair set of Flip filling valve

D- 01- 17 Sealing screw for Valve

A B C

M14 x 1,25 M16 x 1,5 M12 x 1,5 Length 15 mm Length 19 mm Length 14 mm



- 7 -

D- 02- 01 Filling tube for the filling ramp Input: M16 x 1,5

Output: DIN 200 bar

D- 02- 02 Filling tube for the filling ramp Input: M16 x 1,5

Output: DIN 300 bar

D- 02- 03 Filling tube Input: M16 x 1,5 – 60° for hose

Output: DIN 200 bar

D- 02- 04 Filling tube with Flow-Stop Input: M16 x 1,5 – 60° for hose

Output: DIN 200 bar

D- 02- 05 Filling tube short with Flow-Stop Input: M16 x 1,5 – 60° for hose

Output: DIN 200 bar



- 8 -

D- 02- 06 Filling tube with Flow-Stop Input: M16 x 1,5 – 60° for hose

Output: DIN 300 bar



- 9 -

D- 03- 01 Metal hand-ring for sealing Ø 50 DIN 300 bar

D- 03- 02 Metal hand-ring Ø 42 DIN 300 bar





- 10 -

D- 03- 05 Rubber- metal hand-ring Ø 42 DIN 200 bar

D- 03- 06 Metal hand-ring Ø 75 DIN 300 bar, AG 5/8“



- 11 -

D- 04- 01 Backlash valve A B C Input: EO Ø6S EO Ø8S G ¼ ´´ IG Output: G ¼ ´´ IG G ¼ ´´ IG G ¼ ´´ IG A B C

D- 04- 02 Reduction Input: G ¼ ´´ AG Output: G 5/8 ´´ IG, DIN 200 bar

D- 04- 03 Reduction Input: G ¼ ´´ AG Output: G 5/8 ´´ IG, DIN 300 bar

D- 04- 04 Reduction for hose inlet Input: M16 x 1,5 AG Output: G 5/8 ´´ IG, DIN 200 bar



- 12 -

D- 04- 05 Reduction for hose inlet Input: M16 x 1,5 AG Output: G 5/8 ´´ IG, DIN 300 bar

D- 04- 06 Reduction Input: G ¼ ´´ AG 1. Output: G 5/8 ´´ IG, DIN 300 bar 2. Output: SV 225

D- 04- 07 Adapter Input: G ¾ ´´ IG Output: G 5/8 ´´ IG

D- 04- 08 Adapter Input: G ¾ ´´ AG Output: M22 x 1,5 AG



- 13 -

D- 04- 09 Oxygen adapter for Nitrox Input: G 5/8 ´´ IG Output: G 5/8 ´´ IG DIN 200 bar

D- 04- 10 Cover cap G 5/8 ´´ IG, without chain

D- 04- 11 Cover cap anchoring

D- 04- 12 Cover cap for oxygen G ¾ ´´, without chain



- 14 -

D- 04- 13 Connection 90° DIN 300 bar Input: G 5/8 ´´ IG Output: G 5/8 ´´ AG DIN 300 bar

D- 04- 14 Double connection Input: 2 x G 5/8 ´´ IG Output: 1 x G 5/8 ´´ AG DIN 200 bar

D- 04- 15 Double connection for oxygen Input: 2 x G ¾ ´´ AG Output: 1 x G ¾ ´´ IG DIN 200 bar



- 15 -

D- 04- 16 Adapter Input: M22 x 1,5 AG Output: G 5/8 ´´ IG DIN 200 bar

D- 04- 17 Adapter Input: M22 x 1,5 AG Output: G 5/8 ´´ IG DIN 300 bar



- 16 -

D- 05- 01 HP Press reducer– steepless, adjustable DIN 0 – 350 bar

D- 05- 02 Fixing ring for HP Press reducer (D-05-01)

D- 05- 03 HP Press reducer – fix adjusted Adjust range up to 300 bar

D- 05- 04 LP Press reducer 0 – 16 bar

Input: 5/8 ´´ , 200 bar Otput: ¼ ´´



- 17 -

D- 05- 05 LP Press reducer 0 – 20 bar Input: G 5/8 ´´ AG Output: Quick coupling

D- 05- 06 Safety valve without ( TÜV ) PN 225 / 350 bar, DN 5

D- 05- 07 Safety valve holder A B

D- 05- 08 Safety valve ( without TÜV ) PN 225 bar



- 18 -

D- 05- 09 Pneumatic swivel with 2 way valve



- 19 -

D- 06- 01 Check gauge with deaerating Input: G 5/8 ´´

D- 06- 02 Check gauge for oxygen with deaerating Input: G 3/4 ´´ DIN 400 bar

D- 06- 03 Check gauge Ø 100 Inlet: in the rear DIN 400 bar, with glycerine



- 20 -



D- 06- 06 Check gauge Ø 63 Inlet: below DIN 100 bar, with glycerine

D- 06- 07 Check gauge Ø 63 Inlet: below DIN 100 bar



- 21 -

D- 06- 08 Check gauge Ø 100 Inlet: below DIN 400 bar, with glycerine

D- 06- 09 Rubber cap for Check gauge Ø 63



- 22 -

D- 07- 01 Press switch 30 – 500 bar, 240V / 1,5 A

D- 07- 02 Timer 0,05 Sec – 300 Hr. 24V, 42 – 48 V, 110 – 240 V

D- 07- 03 Magnetic valve 330 bar, 220V / 50 Hz, 7,7 W

D- 07- 04 Magnetic valve 230V / 50 Hz



- 23 -

D- 07- 05 Condense automatic

D- 07- 06 Piston for magentic valves for D-07-04

D- 07- 07 Collecting strip for condensate 2 – way

D- 07- 08 Deaerating Valve with check gauge 400 bar Without armature screw



- 24 -

D- 07- 09 Air filter Ø 65 x 70 – N 260 (Bauer, Poseidon, Coltri, Nemec )

D- 07- 10 Air filter Ø 160 x 76 N500

D- 07- 11 Noise silencer Input: ½´´ IG

D- 07- 12 Silencer for oil separator Input: 5/8´´



- 25 -

D- 07- 13 Oil level gauge, 1 Block

D- 07- 14 Oil level gauge, 2 Blocks

D- 07- 15 Kompressor oil 1 L. Mineral 1 L. Synthetic

D- 07- 16 Silicone vaseline 200 Gr.



- 26 -

D- 07- 17 Silentblock Ø 50 x 50

D- 07- 18 Rubber foot

D- 07- 19 Suck hosepipe Ø 30 mm (inner)

D- 07- 20 Digital wet measurement



- 27 -

D- 08- 01 Filter cartridge D 45-200 length: 200 mm, rechargeable



D- 08- 04 Filter cartridge D 70-500 EL length: 500 mm, rechargeable


D- 08- 06 Filter cartridge D 70-700 EL length: 700 mm, rechargeable



- 28 -

D- 08- 07 Oil separator N 280-A length: 280 mm with / without TÜV

D- 08- 08 Filter corpus complete N 620 F length: 500 mm, 300 bar, volume 2,1 L. with / without TÜV N EL



- 29 -

D- 08- 09 Filter corpus complete N 835 F length: 700 mm, 300 bar, volume 2,85 L. with / without TÜV N EL

D- 08- 10 Head of filter cartridge for D 70 EL

D- 08- 11 Head of filter cartridge for D 70



- 30 -

D- 08- 12 Filter spring for D 45

D- 08- 13 Filter spring for D 70

D- 08- 14 Filter separator plate for D 45

D- 08- 15 Filter separator plate for D 70

D- 08- 16 Filter separator felt for D 70 Ø 67 mm

D- 08- 17 Filter separator foamy material for D 70 EL Ø 67 mm



- 31 -

D- 08- 18 Filter separator felt for D 70 EL Ø 63 mm

D- 08- 19 Filter separator felt for D 45 Ø 42 mm

D- 08- 20 Steel bracket for filter D 70

D- 08- 21 Plate for filter D 70

D- 08- 22 Molecular sieve 1 – 1,5 mm



- 32 -

D- 08- 23 Active charcoal

D- 08- 24 Transmitting hose for air 200 / 300 bar

Input: 5/8´´ IG Output: 5/8´´ AG

D- 08- 25 Transmitting hose for air without tightening screw 200 / 300 bar Input: M16 x 1,5 IG Output: M16 x 1,5 IG

D- 08- 26 Steel bracket for 50 L. reservoirs tanks, complete



- 33 -

D- 09- 01 Fill ramp to build in

2x 300 bar, 2x 200 bar

D- 09- 02 Extern fill ramp

2x 300 bar, 4x 200 bar

D- 09- 03 Compressor N 260 Booster

E – Motor, 380 V, 50 Hz, 5,5 Kw condensing automatic, air output: 260 – 1200 l / min, ...



- 34 -

D- 09- 04 Compressor N 260 Booster - silenced

E – Motor, 380 V, 50 Hz, 5,5 kW air output: 260 – 1200 l / min, condensing automatic with timer and also after turn off , ...

D- 09- 05 Reservoirs steel tanks N SS 100 N SS 200 2 x 50 L/ 360 bar 4 x 50 L/ 360 bar

drucklufttechnik otto nemec · input: m16 x 1,5 ag output: g 5/8 ´´ ig, din 300 bar d- 04- 06...

Documents