INSPECTION & INTEGRITY CLEANING SURFACE PREPARATION COATINGS COMPLETE SERVICE SOLUTIONS CORROSION CONSULTANCY

DRIVING INNOVATION IN THE OIL AND GAS FABRIC MAINTENANCE

INDUSTRY TO ENSURE ASSET INTEGRITY

Corrosion Coatings (CCLTD) was formed in May 2014 by to provide UNIQUE technological corrosion, cleaning & inspections products and services to the Oil & Gas (Onshore & Offshore), Petro-chemical, Marine, Mining, Power & Manufacturing Industries here in Trinidad & Tobago, Suriname, Guyana &

Greater Caribbean.

CCLTD provides leading technical and quality related services and products to develop, manage, engineer, build, operate and maintain plant and equipment to the requirements of our customers.

CCLTD Technologies provide an alternative to “It’s been done this way for so long so why change and to

provide a solution where others have tried and failed.

Our technologies provide benefits such as being faster, cleaner, safer, less waste, In-Situ, online, easier surface preparation and coating application etc to reduce project downtime & cost to approx 30-50%.

Unique Services Offered:

• Robotic Inspection, Cleaning, Blasting & Painting solutions • Piping • Hot and Cold Insulation • Cathodic Protection • Structural Fireproofing • Mechanical Services • Cold seal-bonded solutions for reinforcement, repair and fastening solutions • Magnetic Anchoring Solutions • Flare stack repairs • Heat Exchanger Cleaning • Tank, vessel & sump cleaning • High Pressure Water Blasting • Conventional Blasting (wet & dry) and Painting • Dustless vacuum blasting and power tool services • ATEX (spark proof) Blasting and power tool services • Specialized Coatings Installation • Commercial Painting • Equipment Rental – 40k UHP Pumps, Compressors etc • The provision of specialized scaffold access, containment and MEWPS • Manpower services including rope access teams (LV 1, 2, & 3) • Supply of protective products / coatings e.g epoxy, polyurethane, 1 part moisture cure poly urea,

ceramic-epoxy, rubber, water based, VOC free coatings, bitumen tapes, composite wraps etc

COMPANY

.

Corrosion Coatings Ltd (CCLTD) is not a traditional, cleaning, inspection or coating contractor / supplier.

We are here to not just make a big difference but a “spectacular” difference compared with what everyone has done or which product was used before with added cost & time savings and highest safety standard.

CCLTD welcomes inquiries when other service providers or surface protection products or inspection

techniques have tried and failed or where clients struggle to achieve good results from traditional methods and are looking for real added value combined with latest technology.

Strategic Partners:

1) Cyberhawk – CVI inspection using ROAV’s (drones) 2) Tube Tech – Robotic furnace and shell side jet cleaning 3) Gecko Robotics – Robotic UT Inspections for tanks, pipes, boilers etc 4) Inspector Systems – Robotic pipe internal inspection, NDT, coating & machining 5) Cold Pad – Cold seal bonded solutions for reinforcement, repair & fastening 6) McNetiq – Magnetic anchoring solutions 7) Nexxis – Magneto Inspection Robot for complex structures. 8) Vertidrive – ATEX Magnetic crawling robots for cleaning, UHP, wet / dry blasting & painting 9) IAS Group – Robotic cleaning and inspection of risers, conductors, caissons, legs & piles. 10) Voliro – ROAV (drone) spray painting 11) Q Layers – Robotic magnetic crawler for spray painting 12) Washington Mills – Aluminum oxide blasting media 13) Bellemare – Sandblasting abrasives & speciality minerals. 14) Sapeg – Pneumatic sparkless surface treatment grinding tool 15) Pentek – Dustless paint / rust removal power tools 16) Pinovo – Dust free ATEX pneumatic abrasive closed loop vacuum blasting 17) Jetstream – Innovative water blasting solutions 18) CleanWirx – Water treatment to eliminate salts, flash rusting, grease, iron sulfides etc 19) MetaLine – Seamless cartridge spray rubber like coating 20) MCU Coating – Single component moisture cure polyurea coatings 21) RD Coatings – Single coat Industrial waterborne coatings

R & D Led, Technological Surface Preparation, Surface Protection, Cleaning & Inspection Solutions to the

Oil & Gas, Power, Petro-Chemical, Refinery, Mining, Manufacturing, Water / Sewage & Marine

PROJECT SUCCESS IN THE OIL AND GAS INDUSTRY IS MEASURED

BY PERFORMANCE, SAFETY AND SAVINGS.

GENERATE GREATER PROJECT EFFICIENCIES

YOUR PARTNER FOR SUCCESS IN

THE OIL AND GAS INDUSTRY.

.

• Some Local Customers

Atlantic, BP, SHELL, Massy Woodgroup, PPGPL, YARA, NGC, Petrotrin, NP, PowerGen, Methanex, IPSL, PLNL, TCL, Readymix, TTEC, TGU, Tanks-A-Lot, THA, Bermudez, Caribbean Packaging,

ANSA Polymer, UDeCOTT, Stork Technical Services, Laing Sandblasting, TOSL, Damus, Paratech, Trinjet, Massy Energy Fabric Maintenance, ARONCO, ANSA Technologies, Qualitech Machining

Services, Trinidad Inspection Services - TIS, T & T Pilots Association, Chute D'eau Marine Ltd, Best Marine etc

• Some Caribbean Customers

• Guyana Logistics and Support Services, St Vincent International Airport, NSG West Indies, DAMEN, SOL Petroleum, Barbados Airport Authority,

Barbados Power, Barbados Defense Force / Coast Guard, Structural Systems, St Lucia Power, Dominica Ministry of Works & Port, etc

AS MARGINS CONTINUE TO TIGHTEN, WASTE IS NOT AN OPTION.

Some Successful Trinidad first -

• Robotic cleaning system for fired heaters convection banks • Robotic tank surface preparation using 40,000 psi water • ROAV (Drone) to inspect online vent stacks offshore, onshore flares & power transmission AC tower • Dustless abrasive spot blasting with vacuum and recycling features • In-Situ unblocking & inspection of fired heater U-Bend ID coils using bespoke mechanical / flexible drilling system • Unique Hi density ICE non-abrasive blasting for corrosion, coating, cleaning, • Use of dart/scrappers to clean heat exchangers ID safer & faster using low water pressure - 300psi • Applying one part Moisture Cure PolyUrea Miozinc primer & topcoat on wet blasted surface with flash rusting • Applying one part Moisture Cure PolyUrea Miozinc primer & topcoat on damp surface in the night • Applying cold applied cartridge spray rubber-like elastomeric coating for extreme wear & tear on pumps,

impellers, bowls etc

ZENITH

Zenith specializes in delivering innovative structural access and repair solutions to the world’s leading power, petrochemical, process and pharmaceutical companies Zenith has developed an offshore division which provides experienced personnel able to safely carry out a wide range of activities including:

» Flare Tip Replacement without the use of helicopters or cranes » Specialist Engineering & Maintenance » Inspection Services » Condition Surveys » Structural Analysis » Lifting Management

Zenith is a development member of LEEA and we possess a wealth of experience in providing turnkey solutions for the most complex lifting problems. We have pioneered the design of a purpose-built davit to improve the process of replacing flare tips. » Replacement pilot lines » Comprehensive guy wire service » Magnetic flaw detection (guy wires) » Steam line repair/replacement » Full refurbishment throughout full height of flare stack Zenith has its own Rope Access division providing safe, reliable and cost effective rope access solutions to the meet the exacting demands of working at height. Zenith is IRATA registered and all of Zenith’s personnel are IRATA registered to levels I, II & III.

INSPECTION, ACCESS & SPECIALIST WORKS

Cold Seal-bonded Solutions Reinforcement - Repair - Fastening

Cold Pad provides innovative, permanent repair and fastening solutions for hull & deck through cold work techniques. We have developed two

main solutions, ColdShield TM and C-Claw TM, both specially designed for onshore & offshore environment.

Our cold works are revolutionary in the marine world, inspired by

composite techniques that have been used for decades in aeronautics.

Cold Pad optimized its process for extreme marine conditions, especially FPSO environments, where hot works generate a string of

constraints, shutdowns and risks. Our solutions offer permanent structural repairs that change the game of reinforcement, repair and

fastening challenges.

Our teams are made of seasoned Oil & Gas specialists with Structural, Naval architecture, Materials and Material surface engineering

background.

"Unique cold process composite solutions with no hot works" • • No hot works

• No welding or grinding – safe installation with no downtime

• Permanent status

• Extreme durability even under harsh environment

• Fast & qualified installation procedure for all weather conditions

COLD PAD

COLD SEAL-BONDED SOLUTIONS

SPECIALIST WORKS

McNetiq offers ATEX magnetic anchoring solutions.

Safe magnet anchoring as an alternative to temporary welds

Main applications: connecting scaffolds with steel walls, suspended scaffolds, tie downs, fall protection for rope access purposes, bunker systems, temporary lifting eyes, piping, Hoisting eyes, ladders, Lashing eyes fixing sea freight,

temporary gates etc.

McNetiq's Controlock system checks every magnet installed on its performance, this way working with magnets is safer than all alternative connection methods.

THE PRO’S OF CONTROLOCK®

The McNetiq Controlock® anchor is the first magnet anchor with force measurement. This technology has a certainty of 100% on the exact capacity of

the magnet anchor, before the final load.

1. Accurate position of magnet 2. Measurement of tensile and shear force

3. safe loading

This technology has a certainty of 100% on the exact capacity of the magnet anchor

Scaffolding

With McNetiq Controlock® anchor points a scaffold can indeed be securely anchored: lean and mean, only where required and many buttresses can be

omitted. The result: savings of 40% on lead time and 70% on materials.

Fall Protection: Fall Restraints With McNetiq Controlock® magnetic anchors, fall restraining positioning lines

can be safely secured. This technique is especially applicable in situations where permanent fixing points cannot be used.

In circumstances where, for example, handrailings cannot or may not be

installed, then McNetiq Controlock® magnets can be attached to lines to form a safe and secure basis for fall restraint purposes. The magnet will be connected to a lanyard with harness, to prevents the worker from reaching unsafe areas.

McNetiq

MAGNETIC ANCHORING SOLUTIONS

SPECIALIST WORKS

TUBE TECH

ENGINEERED CLEANING PIONEERS

Unplanned or extended unit shutdowns can be very costly for operators. Over the past two decades, Tube Tech has helped to minimise downtime and solve some of the most difficult cleaning

problems at oil and gas facilities around the world.

Robotic Fired Heater / Furnace Cleaning

Efficiently cleaning Fired Heater and Furnaces using innovative cleaning techniques

90% improvement over traditional cleaning technologies

Shell Side Jet

1. While controlled by two people, the system is smart enough to complete the cleaning on its own.

2. A precision knife penetrates between 6mm tube rows.

3.Intelligent lance technology moves with the shape of the tube and the system detects blockages, broken tubes and incorrectly

positioned baffles.

4. Detailed digital reports are provided to the client including the distance of baffle plates, location of damaged or broken tubes,

volume of fouling, photos of before, during and after the clean, and an intuitive heat map.

CLEANING

Cyberhawk offers close visual, geospatial, ROW (beyond line of sight), 3D, thermal inspection & surveys of high, live and difficult to reach

assets e.g. flare stacks & tips, vents, under platform deck, jetty, chimeys, tank internals, cooling towers, structural & emergency plant

inspections etc using ROAV’s unmanned aerial vehicles (UAV).

Founded in 2008 & started this unique service with the worlds FIRST UAV flare inspection and over 25 worlds first, have now become THE

world leader in UAV inspection company with over 25,000 safely executed flights for the oil & gas industry. Cyberhawk plays key role in

development of UK drone guidelines for offshore Oil & Gas.

Our qualified and experienced inspection engineers (CSWIP, ASME, API, CAA, ex air force pilots) will provide detail reports which allow you

to make operationally critical maintenance decisions. Our offshore pilots undertake 4 levels of training and have a minimum of 18 months’ experience and 500 flights.We minimize the risk of costly delays during

planned TAR and the need for people working at heights.

CYBERHAWK

CVI, HD, 3D, VIDEO, THERMAL, SURVEY USING REMOTELY OPERATED AERIAL VEHCILES (ROAVs)

INSPECTION

Pipe Internal Crawler

Pipe robots from INSPECTOR SYSTEMS have been especially developed for the inspection and maintenance of the interior of pipe

systems.

Their construction allows the robots to work in long lengths of pipes, which include many bends, and vertical sections of piping.

Inspector Systems is a specialist in manufacturing of self-propelled, tethered and remote controlled pipe robots for internal inspection,

non-destructive testing and machining as well as to provide worldwide services, especially for so called „challenging pipelines“ or buried-, difficult to access- and complex pipe structures of any kind.

The robots are made up of multiple drive units and a head module

(i.e. inspections or grinding elements), all of which are joined together with flexible, folding bellows. The wheels of the drive units can be

pneumatically pressed to perfectly grip the interior walls of the pipe. This means that even vertical sections of pipe can be travelled.

INTERNAL PIPE ROBOTS for:

Video / Laser Inspection

HD Pictures Ultrasonic

Eddy Current Radiography

Rubber pipe inspection Suction / Vacuum Cleaning

Milling Grinding / Polishing

Coating

INSPECTOR SYSTEMS

ROBOTIC CLEANING / INSPECTION

INSPECTION

Wall climbing robots perform non-destructive testing on tanks, boilers, scrubbers, piping and more. Using different inspection

payloads, the robots can inspect wall thickness, cracking, pitting, and other forms of degradation. With continuous data

capture, robots can collect 1,000x more information while also performing the inspection on average 10x faster than previous

methods

25x Faster Than AUT 100% Inspection Coverage

1000x More Data Highest Safety Cost savings

Assets Boilers, Scrubbers, Tanks, Silos, Pipe, Digesters, Pressure

Vessels, .

INSPECTION

GECKO ROBOTICS

ROBOTIC INSPECTION

SURFACE PREPARATION / CLEANING

ATEX MINI ROBOTS

Toensurethemaximumefficiencyanddurabilityofbigsiloscontainingfluids,effluent,gasesanddusts,pipesetcitisnecessarytoconstantlyandaccuratelymaintainthemwithminirobotsthatcanworkinverynarrowspacesorin

environmentswithdangerousemissions.

Foreverykindoftank,GerottohasdesignedandproducedspecificMiniRobotExcavators,thatallowoperatorsto

workatasafedistance:

TankCleaners(LombricoATEXandGattoATEX),suitableforcleaningstoragetanksinexplosionriskareas;

DozerRC,aremotecontrolledminiloaderthatconveysmuddydepositstowardsasuctionmachine(Suction

Excavator,VacuumTruck,ecc.);

FTC-NME(FuelTankCleaning-NoManEntry),ATEXcertifiedmachinecreatedforwashingtheinnersurfacesof

cylindricalfueltanks.

ATEX Certified, Fully Pneumatic Dustless Abrasive blasting

Our closed loop grit blasting technology (also known as vacuum blasting or dustless / dust free blasting), provides a dust free alternative, low noise emission and superior surface quality.

Cost reduction up to 70% due to high quality repair, no spill and safe

execution

Typical advantages with the Pinovo-solution –

• Longer lifetime on maintenance and paint • Reduced health hazard for operators • No disturbance of other work disciplines (multiple discipline

work) • No harm to nearby equipment (ideal for control rooms and

areas with sensitive equipment) • Zero spill to the environment • Up to 90 % reduced carbon footprint • Recycled blast media (reduced blast media consumption) • The ability to work in explosive areas (ATEX certified) • Work radius up to 50 m (depending on the conditions) • Feathered edges ensures a permanent repair between existing

coat system and new coat on blasted area • Less requirement for barriers, scaffolding and masking • No clean up or sheeting

Perfect for everyday FM, SIMOPS, sensitive / confined

environments, maintain newly coated substrate, spot repairs, welding seams, flanges and rope access

SURFACE PREPARATION

PINOVO

DUSTLESS ABRASIVE BLASTING

Innovations that stick

VertiDrive, established in 2008, is an innovative company that designs safe, environmentally friendly ATEX zone 1 & 2 and cost-effective

robotic solutions.

We develop and produce robotic solutions that re-invent the way of work at impossible places. Starting from attraction, we look at safety, accessibility and efficiency from every perspective, in 360 degrees.

Ready for the challenges of tomorrow.

Robots stick to vertical, horizontal and overhead steel surfaces

Easily application switch in just a few minutes; you will be able to change from Dry-blasting to Washing without wasting any time. Easy

to use UHP water jetting, wet blasting, camera inspection, NDT, induction or any other desired application

M2 Handy – hand held magnetic robot for UHP blasting

M3 – washing, cleaning, grit blasting, wet abrasive blasting or hydro blasting

M4 – 40 K Hydro-blasting with vacuum system

M8 – Cargo hull inspection robot

SURFACE PREPARATION

VERTIDRIVE

ATEX MAGNETIC ROBOTS

SURFACE PROTECTION

AUTONOMOUS FLYING & CRAWLING ROBOTS

SPRAYING

C O R R O S I O N C O A T I N G S L T D A N D A F F L I A T E S P R O V I D E S

A U T O N O M O U S A E R I A L A N D C R A W L I N G S P R A Y I N G R O B O T I C

S O L U T I O N S .

Using our specially design aerial & magnetic crawling robots and proprietary algorithms for accurate localisation and navigation, we can achieve high quality spraying and ensure full

coverage of treated surfaces.

R E L I A B L E C O N T A C T - B A S E D I N S P E C T I O N

U T ( U L T R A S O N I C T E S T I N G )

A N D D F T ( D R Y F I L M T H I C K N E S S )

SURFACE PREPARATION

IAS GROUP

ROBOTIC BLASTING / CLEANING

iasgroup leads innovation in the integrity, preservation and decommissioning of production and distribution

critical assets.

iasgroup is the leading provider of automation for inspection, maintenance and repair solutions. Through

automation, we are able to deliver market leading technologies to site, with significantly improved process

safety and efficiency.

ACIT Genius - Remotely Operated Simultaneous

Cleaning & Inspection Tool

ACIT Genius is a fully automated, remotely operated tooling system, capable of simultaneous high quality

cleaning and inspection on risers, conductors, caissons, legs and piles.

The ACIT Genius can work above or below the waterline, and through the splash zone in most sea states without

divers.

Bellemare Abrasives & Minerals is one of the largest manufacturer and distributor of iron silicate abrasives for surface preparation and high-pressure sandblasting. MAXIBLAST® holds a solid place in the North

American market because of its unparalleled quality.

USE

Recommended for cleaning rust, paint or scale on steel.

FEATURES & BENEFITS

• Most effective product in its category

• Low dust emission

• Cleans faster requiring less product

• Contains less than 0.1% free silica

• Compliant with SSPC-AB1 and MIL-A-22262B (SH) standard

PRODUCT DATA

• Particle shape: Angular

• Hardness: 7.0 – 7.5 MOHS

• Density: 112 lb/ft³ – 1794 kg/m³

• Specific gravity: 3.5

Other Products – Steel grit, Steel shot, Garnet, Glass, Aluminium Oxide,

BELLEMARE

ABRASIVE & SPECIALITY MINERALS

SURFACE PREPARATION

CleanWirx 207 is a surface preparation product guaranteed to improve coating adhesion and mitigate

under-film corrosion.

Achieve the ultimate visual and microscopically clean metal in minutes, stop flash rust and prevent corrosion under

coatings well into the future.

CleanWirx 207 removes strongly bonded microscopic

traces of:

• Visible and nonvisible corrosion generators • Ionically-bonded iron chlorides, sulfates, and nitrates • Metabolic byproducts of sulfate-reducing bacteria that

create Microbiologically Influenced Corrosion (aka iron sulfide)

• Chemical and biological contaminants

CleanWirx 207 Features: • The original 1-step application

• Leaves pH neutral surface • Fast-drying

• NOT AN INHIBITOR • NOT A FILM FORMER

• NO RESIDUE • Biodegradable

• 100:1 ratio

SURFACE PREPARATION

CLEANWIRX

METAL SURFACE PREPARATION PRODUCT

SURFACE PREPARATION

PENTEK

DUSTLESS PAINT REMOVAL

Pentek’s vacuum products form an integrated system which minimizes worker exposure to hazardous materials

and maximizes productive up-time.

All of our tools are vacuum-shrouded for dustless operation. In most applications, no respirators

or containment structures are required!

The operation generates no additional chemical waste since it is 100% mechanical, greatly reducing

disposal costs.

There is no costly containment to setup before starting the job or additional cleanup after it’s done, because our

shrouded power tools capture dust before it’s emitted. Our powerful HEPA vacuum deposits hazardous waste directly into a 55-gallon drum, safely sealed and ready for transport

when full.

RUST™ ATEX Grinding Tools

Will efficiently remove: rust, coating (paint, chartex, silicone/rubber, bitumen etc.), salt and other contamination on the

surface.

Grinds away welding seams and weld spatter.

RUST are safe and easy to operate..

Disc can last from months to years

You can connect water on the angle grinder.

RUST™ ATEX Grinding Tools

Dnv certified for Zone 1 & 2, cat. 2 equipment for use in explosive atmospheres.

Approved according: ATEX 2014/34/EU directive

Health, Safety and Enviroment ! Cold work certified tools

! Low vibration 2.5 ms! ! Low noise <85dB ! Low temperature

! No hot sparks ! No explosion danger

! Little or no dust.

Interchangable tools

The interchangable high efficiency studs in grinding disc are made of high

quality tungsten carbide. You don`t have to change the disc when studs are

worn out or refract, they can be replaced one by one.

SURFACE PREPARATION

SAPEG – R.U.S.T

ROTATING UIVERSAL SPARKLESS TOOL FOR SURFACE TREATMEN

MOISTURE CURE POLYUREAS

LONG LIFE PROTECTION PERFORMANCE WITH MINIMAL APPLICATIONS RESTRICTIONS

Allow the coatings applicators to do their painting job in ALL WEATHER

conditions and with much LESS RESTRICTIONS

Save application time and material cost from 20 to 50%

COT Approved: Class ISO 12944 version 6, C5 VH (“Very High” 25+ year durability) on corroded surfaces, only with St3 (power tool) surface preparation.

Advantages over traditional coatings

1) 2 or 3 coat system 2) 1 part – No mixing 3) No pot life 4) No dew point or Humidity restrictions 5) Surface tolerant to tightly adhered rust, flash rust, damp / sweating

surfaces 6) High salt / chloride tolerance to 55 ppm 7) Resistant to rain / dew in minutes 8) Topcoat with biocide to prevent algea growth 9) Cures even at – 15 deg C 10) No over coating restrictions 11) Highly flexible – No mud cracking up to 14 mils dft 12) Non porous zinc primer which will not form zinc salts 13) No chalking – higher UV resistance and colour rentention 14) Low anchor profile – 1 to 2 mils 15) No near white blasting needed – power tool acceptable 16) 1 thinner of all products 17) No induction time 18) Moisture absorption deep in pits & pores – Better wetting out 19) Ready to spray, roll or brush 20) Anti Algae additives in Topcoat

MCU COATINGS

BEST IN CORROSION PROTECTION

SURFACE PROTECTION

Elastomeric repair coatings using novel spray cartridge system

Combining the wear / tear resistance of vulcanized rubber linings, durability of steel with the simple processing of a coating with

extreme lifetime improvements offering duplex steel protection

Energy Absorption – soft substrate that absorb energy, store it, and give it back after the impact has ended e.g. rubber, polyurethene or metaline

• Up to 2-2000 times more erosion resistant compared to leading epoxy ceramic repair compounds, teflon & rubber linings

• Up to 25 % more erosion resistant than AISI 316 (1.4401 / X5CrNiMo17-12-2)

• Ultra lightweight coating structure (Ρ = 1,05 g/cm³) • Applicable in any required thickness up to 25 mm (1 IN) • High end duplex salt-water corrosion properties (20,000 salt

spray test) • Bonds to metal, rubber, brass, wood, concrete, GRP & most

plastics • NON POROUS • Any colours • Ultra smooth or anti skid

SURFACE PROTECTION

METALINE

CARTRIDGE SPRAY RUBBER COATING

SURFACE PROTECTION

RD COATINGS

WATERBORNE PROTECTIVE COATINGS

INDUSTRIAL WATER BASED SINGLE COAT SYSTEM

eco-friendly – fast drying – outstanding performances – single component - easy application

New Generation Anti-Corrosion Coating

Take advantage of all the benefits from RD Coatings – SCS – Single Coat System – products. Each can be used separately or

together to protect in an easy and highly effective way for metallic substrates.

Single coat systems are specially designed to be applied as a two coat system of the same product.

Developed for harsh industrial and marine environments Very good adhesion to steel, zinc, stainless steel, etc. Extremely fast

drying time

Primer and top coat in one, UV and weathering resistant

Application by brush, roller or spray

High Performance coating formulated with a mix of new generation acrylic resins and innovative anti-corrosion additives.

Enables the achievement of long-term protection against corrosion with less thickness compared to classic systems. A film

of 200 μm will prevent the development of corrosion on steel exposed to harsh industrial and marine conditions (C5i/C5m).

Welcome to PowerWrap, your complete source for fast, easy and cost effective solutions to remedial needs on and offshore utilizing high strength composite repair solutions and anti-corrosive coatings and

adhesives.

PowerWrap has serviced and supplied products for close to 20 years all over the world for Oil and Gas Companies, US Military, State and City

Municipalities, and Water and Waste Treatment Plants. PowerWrap has been a leader in the Energy Industry in utilizing ASME PCC-2 and ISO

24817 standards in accordance with a variety of pipe standards of composite repair systems for high and low pressures.

Our products service everything from pipeline integrity solutions, tank wall

and floor repair or replacement, mechanical reinforcement, piling repair restoration, and leak repair. We have specialized formulations for high

temperatures, high chemical resistance, underwater applications and even a system that can be applied in the presence of hydrocarbons.

PowerWrap will provide detailed project planning, contractor training and approval, written specifications, on-site quality control and technical

oversight.

Powewrap provides fiberglass & carbon composite systems for Pipeline, Piling, and Infrastructure repair. PowerWrap’s repair products include Polyurethane impregnated fiberglass s wraps as well as hand lay-up

fiberglass and carbon fiber epoxy composite systems. We have specialized formulations for high temperatures, high chemical resistance,

underwater applications and even a system that can be applied in the presence of hydrocarbons.

POWERWRAP

COMPOSITE REPAIR SOLUTIONS

SURFACE PROTECTION

#1 Bhagwantee Road, Torrib Trace, New Grant, Princes Town, Trinidad, W.I.

868-655-9145 sales@ccltdtt.com www.ccltdtt.com

Smart Fabric Maintenance plans, products & services designed to extend asset life expectancy while

providing the best cost effective solution with highest safety standards.