drilling products overview catalog

Drilling Products OverviewTotal Rig Package Solutions for Your Drilling Needs

ii

1 - Drilling Overview

Total Rig Package Solutions ............... 1

Total Cost of Ownership ................... 2

Full Life Cycle Support ....................... 3

Benefits Per Customer ...................... 4

Illustrations ....................................... 5

2 - Rig Designs and Rig Kits ................. 9

Offshore Jackup Rigs ...................... 10

Rig Kits ........................................... 13

Well Intervention Packages ............. 14

3 - Pressure Control Equipment......... 15

Blowout Preventers (BOPs) .............. 16

Rams and Ram Packers ................... 20

Connectors ..................................... 22

Riser Systems .................................. 23

Diverters ......................................... 27

BOP Control Systems ...................... 28

Choke and Manifold Systems ..........30

Valves ............................................. 32

Technologies ...................................34

4 - Drilling Equipment ........................ 37

Rotating Systems ............................ 39

Hoisting Systems .............................40

Handling Systems ............................ 42

Rig Control Systems ........................46

Power Systems ................................48

Circulating Systems ......................... 50

Mud Processes ................................ 52

Motion Compensation/ Tensioning Systems .........................54

5- CAMSERV Aftermarket Services ... 55

Training .......................................... 56

Advanced Software and Support .... 57

TRANSACT .....................................58

Aftermarket Services ....................... 59

Global Coverage Map .....................60

DRILLING OVERVIEW | TOTAL RIG PACKAGE SOLUTIONS

TOTAL RIGPACKAGESOLUTIONSCamerons Total Rig Package Solutions bring

Camerons reputation for safety and reliability

to all your equipment and service needs.

This complete suite combines our best-in-

class equipment and comprehensive services,

providing customers with a lower total

cost of ownership. Through our worldwide

network of resources, we present full life

cycle support, from conceptual design to a full

range of aftermarket services. And our global

infrastructure provides service and support

wherever and whenever needed. For reliable

rig equipment and far-reaching service, the

clear choice is Cameron.

1

DRILLING OVERVIEW | TOTAL COST OF OWNERSHIP

TOTAL COST OF OWNERSHIP

Cameron understands that maximizing uptime means lower total cost of ownership and greater

returns for our customers. With growing demands for rig efficiency, the value of safety and

reliability cannot be overstated. Through a comprehensive approach that impacts every aspect of

our business, Cameron is dedicated to ever-increasing rig efficiency.

Quality and Performance

Cameron invests in state-of-the-

art engineering and unrelenting

quality control processes throughout

the design, engineering, project

management and manufacturing of

your equipment. This has garnered a

reputation in the industry for high-

performance, quality products.

Service and Support

Providing technical expertise and

extensive training programs, Camerons

aftermarket services are available

to help you meet your objectives

throughout the life cycle of your project.

With your return on investment in mind,

our network of technical specialists

spans the globe so theres no waiting

for support.

Integrated Solutions

Camerons Total Rig Package Solutions

ensure your entire system incorporates

a high level of product integrity.

By leveraging a cohesive package

thats built to withstand the specific

challenges of your project, you assure

more reliable long-term performance

and lower aftermarket costs.

2

Conceptual Design

Conducting FEED studies and utilizing

modeling packages that maximize the

rigs capabilities.

Detailed Engineering

Creating the right customized solution

based on specific project requirements.

Project Management

Using the latest technology to address

key areas of project implementation and

planning, including systems engineering,

safety procedures, documentation and

risk management, combined with an

integrated, closely coordinated

technical team.

Manufacturing

Providing industry-leading drilling

equipment to meet the demanding

requirements for rigs today.

Installation and Commissioning

Delivering and testing your system on

time to achieve operational goals in the

most efficient and economic manner while

meeting budgetary and logistical concerns.

CAMSERV Services

Comprehensive support of CAMSERV

Aftermarket Services, as well as the training

to provide a better understanding of the

equipment and systems on board a

specific rig.

DRILLING OVERVIEW | FULL LIFE CYCLE SUPPORT

FULL LIFE CYCLE SUPPORT

At every stage in the process, Cameron offers expertise across the

full scope of a projects life cycle. We combine proven industry

technology with practical operational experience gained from

projects around the globe.

M A N U F A C T U R I N G

DE TA

I L ED

EN

GI N

EE

RI N

G

C O NC E P T U A L D E S I G N

FULL

LIFE

CYCLE SUPPORT

FULL LIFE CYCLE SU

PPO

RT

INS

TA

LL

AT

I ON

& C

OM

MI S S I O

N I N G

P R

OJ E

CT

MA

NA

GE

ME

NT

CA

MS

ER

V S

ER

VI C

E S

At Cameron, we provide

Total Rig Package Solutions

backed by full life cycle

support to ensure efficient

and reliable results

throughout the life of every

project. With rig solution

packages that include world-

class products, technology,

services and support,

Cameron is the trusted,

single-source supplier for all

your drilling needs.

3

DRILLING OVERVIEW | BENEFITS PER CUSTOMER

4

BENEFITS PER CUSTOMER

No matter the size and scope of your project, Cameron has employed proven processes to meet

customer needs and requirements. With a dedication to quality and a commitment to delivering

reliable products and service, Cameron has built long-standing relationships with customers that

illustrate our reputation as a trusted rig solutions supplier.

Contractors

Cameron provides safe, reliable rig equipment

that is proven to perform long term, ultimately

reducing total cost of ownership for our

customers. Through our CAMSERV Aftermarket

Services, we provide global and timely support for

all your equipment and solutions.

Shipyards

With a comprehensive range of products,

Cameron offers shipyards turnkey solutions and

full life cycle support to ensure projects meet

customer requirements and are delivered on time

within budgetary requirements.

Operators

Camerons drilling products and solutions provide

superior rig efficiency and reliability, resulting in

more productivity, more uptime and operational

savings for operators. Camerons OEM-designed,

quality products ensure the best potential for safe

and reliable operations.

1 Derrick 2 Fingerboard 3 Travel Blocks 4 Top Drives 5 Column Racker 6 Drawworks 7 Drilling Control Rooms 8 Choke and Manifold System 9 Hydraulic Roughneck 10 Rotary Table 11 Diverter 12 BOP Controls 13 BOP Stack 14 BOP Handling 15 Legs 16 Pedestal Deck Cranes 17 Elevating System 18 Hull 19 Pipe Deck Crane 20 Catwalk Machine 21 Mud Pumps 22 Mud Mixing Equipment 23 Drilling VFD 24 Solids Controls Equipment 25 Production Riser

Tensioning System

DRILLING OVERVIEW | JACKUP RIG ILLUSTRATION

JACKUP RIG

5

Cameron offers customized jackup rig kit packages based on one of five LETOURNEAU designs.

Built for shallow draft to ultra-harsh environments, these rigs are engineered for reliability and fit all

of Camerons high-performance drilling equipment. Additionally, Camerons worldwide fabrication

license provides more shipyard options for customers.

232221

10

9

8

7

6

15

16

19

18

17

1412

13

20

24

5

4

3

2

1

11

25

DRILLING OVERVIEW | DRILLSHIP ILLUSTRATION

DRILLSHIP

From conceptual design to detailed engineering, project management, manufacturing

and installation and commissioning, Cameron offers Total Rig Package Solutions for

drillships, backed by the expert support of CAMSERV Aftermarket Services. From high-

performance pressure control and drilling equipment to automated control systems,

our products demonstrate our commitment to deliver next-generation solutions. Our

technology allows the entire operation to be remote controlled, making our products

safer, more reliable and easier to use.

6

1

2

3

4

65

7 8 9 10 11

1413

2615

Drillship des

ign courtes

y of Bassoe

Technolog

y.

12

DRILLING OVERVIEW | DRILLSHIP ILLUSTRATION

7

1 Top-Mounted Compensator

2 Derrick 3 Column Racker 4 Fingerboard 5 Travel Blocks 6 Top Drives 7 Drilling Control Rooms 8 Hydraulic Roughneck

9 Choke and Manifold System

10 Rotary Table 11 Drawworks 12 Riser Gantry Crane 13 Riser Catwalk Machine 14 BOP Handling 15 Riser Systems 16 Connectors 17 BOP Stack

18 BOP Controls 19 Riser Tensioner System 20 Solids Control

Equipment

21 Mud Pumps 22 Mud Mixing Equipment 23 Pipe Catwalk Machine 24 Pipe Deck Crane 25 Drilling VFD 26 STiCS

22 25

181716

1920

21

24

23

RIG DESIGNS AND RIG KITS | RIG KITS

Camerons Super 116E Jackup Rig

8

9RIG DESIGNS AND RIG KITS

Cameron offers offshore and onshore rig designs and rig kit packages with integrated drilling equipment to deliver advanced technology in demanding drilling applications.

2.1 | Offshore Jackup Rigs

2.2 | Rig Kits

2.3 | Well Intervention Packages

2.1 | OFFSHORE JACKUP RIGS

Leveraging more than 50 years of experience and knowledge in rig building, Cameron offers proven

LETOURNEAU offshore rig designs and kits to meet todays drilling demands.

Super 116E Class Rig

The Super 116E rig is built on the strengths of the original design,

the LETOURNEAU 116C rig, while expanding the capability of its

predecessor, the Super 116 rig. This rig is proven as a versatile and

cost-effective tool for exploration and development drilling, with

workover capabilities in moderate storm locations in water depths

to 350 ft (107 m).

WORKHORSE Class Rig

The WORKHORSE jackup rig is engineered to drill in water depths to

400 ft (122 m) in moderate storm locations, while holding more than

10,000 kips of drilling variable load with advanced cantilever capacities.

This rig utilizes the LETOURNEAU 440-kip opposed-pinion elevating

unit and guide system, along with strong leg structures to handle

seabed uncertainties.

10

RIG DESIGNS AND RIG KITS | OFFSHORE JACKUP RIGS

Super Gorilla XL Class Rig

Designed to drill in ultra-harsh locations in

water depths to 550 ft (168 m), the Super

Gorilla XL rig is a high-performance rig used

in challenging tropical storm regions. Similar

to the Super Gorilla design, the Super Gorilla

XL rig is built to perform in many locations

around the world, including Norway and the

Eastern Canadian seaboard.

RIG DESIGNS AND RIG KITS | OFFSHORE JACKUP RIGS

11

Camerons Super 116E Jackup Rig


12

Leg Structures

To meet high demands of rack, chord and bracing, Camerons LETOURNEAU legs are

manufactured from ABS-approved, high-strength alloys.

Elevating Systems and Controls

Camerons LETOURNEAU elevating systems are designed to meet a wide range of

offshore requirements, including in the harshest environments. These systems offer a

range of normal elevating and preload jacking ratings and storm holding capabilities

as great as 1800 kips per pinion, with a product line of 150-, 375-, 440- and

1000-kip units.

Cantilever Skidder Systems

Camerons LETOURNEAU skidders deliver 263,000 lb of thrust at 6 ft/min (2 m/min).

Featuring a LETOURNEAU gearbox, motor and brake assembly, these systems have

proven their ability to move large substructures on more than 200 installations.

Pedestal Deck Cranes

Camerons LETOURNEAU PCM-series pedestal deck cranes respond faster, reduce

downtime and maintenance, lower operating costs and are environmentally friendly.

2.2 | RIG KITS

Cameron offers a full line of rig components for jackup rigs,

including leg structures, elevating systems, cranes and skidder

units. Our expert technicians, inspectors and project managers

possess the necessary skills to deliver the components you

require on spec, on time and on budget.

Elevating Systems

Pedestal Deck Crane

Leg Structures


13

14

RIG DESIGNS AND RIG KITS | WELL INTERVENTION PACKAGES

Cameron combines extensive knowledge in drilling, subsea handling and active heave-

compensation equipment to deliver efficient well intervention systems. Together with our

customers, we develop well intervention packages that can be optimized for special tasks, or

designed as multipurpose solutions, making the vessels attractive in many market segments.

2.3 | WELL INTERVENTION PACKAGES

16

3.1 | BLOWOUT PREVENTERS (BOPs)

Focused on reliability and safety, Cameron continues to innovate in response

to your drilling BOP needs. With the worlds largest installed base of BOPs,

Cameron has provided a legacy of technology leadership, from the industrys

first BOP in 1922 to the worlds first 13-5/8 25,000 psi BOP. With Cameron,

reliability begins in the design phase and continues through the use of

proprietary products, including high-performance elastomers.

PRESSURE CONTROL EQUIPMENT | BLOWOUT PREVENTERS

Ram-Type

EVO BOP

TL BOP

U BOP

UM BOP

T-81 BOP

T-82 BOP

EVO BOP

Application: Offshore (subsea and surface) and onshore

Bore Sizes and Working Pressures: 18-3/4 15,000, 20,000 psi

Body Styles: Single, double, triple

Pressure-energized Rams: Yes

Hydromechanical Lock: EVO-Loc and motors

Bonnet Studs Instead of Bolts: Yes

Tandem booster bonnets available for increased shearing and sealing capabilities. Super shear bonnets available for shearing casing.

TL BOP


Bore Sizes and Working Pressures: 18-3/4 5000, 10,000, 15,000, 20,000 psi



Hydromechanical Lock: RamLocks (5000, 10,000, 15,000 psi working pressure); ST lock (10,000, 15,000, 20,000, 25,000 psi working pressure); Wedgelocks (5000 psi working pressure)


Tandem booster bonnets available for increased shearing and sealing capabilities. Super shear bonnets available for shearing casing.

RAM-TYPE BOPs

Cameron offers an extensive product line of ram-type BOPs with features that help to reduce rig

maintenance and downtime.


17

T-82 BOP

Application: Onshore

Bore Sizes and Working Pressures: 7-1/16 3000, 5000 psi; 11 3000, 5000 psi; 13-5/8 3000, 5000 psi

Body Styles: Single, double


Hydromechanical Lock: No; manual locks only

Hydraulically Opening Bonnets: Yes

Bonnet Studs Instead of Bolts: No

UM BOP


Bore Sizes and Working Pressures: 7-1/16 and 11 3000 to 15,000 psi; 13-5/8 10,000 psi

Body Styles: Single, double, triple, quad


Hydromechanical Lock: Optional; manual locks standard



Large bore bonnets and FXT bonnets available for increased shearing and sealing capabilities.

T-81 BOP


Bore Sizes and Working Pressures: 7-1/16 3000, 5000 psi; 9 3000, 5000 psi



Hydromechanical Lock: No; mechanical locks only


Bonnet Studs Instead of Bolts: Yes; also studs on the door

U BOP

Application: Offshore (surface) and onshore

Bore Sizes and Working Pressures: 7-1/16, 11, 13-5/8 3000 to 15,000 psi; 16-3/4 3000 to 10,000 psi; 20-3/4 3000 psi; 21-1/4 2000, 5000, 10,000 psi; 26-3/4 3000 psi

Body Styles: Single, double, triple, quad


Hydromechanical Lock: Optional; manual locks standard


Large bore bonnets and FXT bonnets available for increased shearing and sealing capabilities.


18

Camerons EVO BOP


19

DL BOP


Bore Sizes and Working Pressures: 7-1/16 to 21-1/4 and 2000 to 15,000 psi

Body Styles: Single, dual

Packer: High-performance CAMULAR

T-84 BOP


Bore Sizes and Working Pressures: 7-1/16 3000, 5000 psi; 9 3000 psi;

11 3000, 5000 psi; 13-5/8 3000 psi

Body Styles: Single

Packer: Synthetic rubber

Annular

DL BOP

T-84 BOP

T-90 BOP

ANNULAR BOPs

Cameron offers a variety of field-proven annular BOPs to fit your desired drilling applications. Our

portfolio includes models that feature a quick-release top for prompt packer changeout and, when

vertical space is limited, reliable solutions in a compact design.

T-90 BOP


Bore Sizes and Working Pressures: 7-1/16 3000, 5000, 10,000 psi;

9 3000 psi; 11 3000, 5000 psi; 13-5/8 3000, 5000 psi

Body Styles: Single

Packer: Synthetic rubber

PRESSURE CONTROL EQUIPMENT | RAMS AND RAM PACKERS

3.2 | RAMS AND RAM PACKERS

Cameron offers the most comprehensive

line of rams and ram packers in the industry.

Our rams cover a wide range of drilling

requirements, including shearing high-

strength casing and drill collars. Cameron

also offers a choice of rams for variable bore

sealing and high-temperature applications.

Cameron is known as a pioneer in variable

bore sealing technology. The name variable

bore ram (VBR) is synonymous with the

CAMERON VBR. In addition, Cameron

offers the FLEXPACKER, FLEXPACKER NR

and the dual bore FLEXPACKER, which

provide sealing on specific bore sizes.

CDVS Ram

VBR

Pipe Ram

20

PRESSURE CONTROL EQUIPMENT | RAMS AND RAM PACKERS

ELASTOMER TECHNOLOGY

One of the many ways to differentiate Camerons drilling products from those of other manufacturers is the elastomers used in

critical sealing areas, such as ram packers and top seals.

Camerons drilling products exclusively feature proprietary elastomers designed and manufactured by our facility in Katy, Texas.

Cameron provides engineered solutions to elastomeric material problems, and for drilling applications, we have developed

CAMRAM, CAMRAM 350, CAMULAR, CAMLAST and DUROCAM elastomer products to meet the rigorous demands of the oil

field. These products, when used in Camerons ram-type BOPs and annular BOPs, help to improve performance, extend service life,

reduce downtime and lower operating costs. Elastomer components are in-house engineered products with required API testing as

with all other pressure control equipment.

21

Shearing

Shearing Blind Ram (SBR) 4 4** 4 4

Double V Shear (DVS) Ram 4 4** 4** 4**

Super Shear Ram* (SSR) 4 4 4 4**

H2S Shearing Blind Ram (H2S SBR) 4 4 4 4

Dual String (DS) Shear Ram 4** 4**

Interlocking Shear Ram (ISR) 4** 4**

Dual String Interlocking (DSI) Shear Ram 4** 4

Cable Double V Shear (CDVS) Ram 4 4

Variable Bore

VBR-II (Variable Bore Ram) 4** 4** 4** 4**

FLEXPACKER 4** 4** 4** 4**

FLEXPACKER-NR 4** 4** 4** 4** 4**

Dual Bore FLEXPACKER 4** 4** 4** 4**

PipeStandard Service 4 4 4 4 4 4

High Temp Service 4 4 4 4 4

RAM DESCRIPTION

RAM-TYPE BOP MODELS

EVO TL U UM T-81 T-82

RAM SELECTION CHART

* Non-sealing ram; does not contain elastomeric material.** Contact your local Cameron representative to learn more about specific sizes.

3.3 | CONNECTORS

PRESSURE CONTROL EQUIPMENT | CONNECTORS

As drilling depths have increased, Cameron has expanded its product

offerings to include a full range of collet connectors able to secure your

subsea BOP stack connections from shallow to ultra-deepwater environments.

The Model 70 is offered in sizes and

pressure ratings for a wide variety of

applications.

Model 70

HCH4DWHC

HC

EVO-Con

The DWHC is a high-strength

drilling and completion collet

connector, engineered for the

high loads encountered in ultra-

deepwater applications.

The HCH4 connector locks

onto an H4 wellhead.

The HC is similar to the Model 70, but is

designed to provide greater preload to

withstand higher separating forces.

The EVO-Con connector works on

various wellheads, giving you increased

versatility and capacity, and is made with

only one hydraulic unit.

Model 70 Collet Connector

HC Collet Connector

DWHC Collet Connector

HCH4 Collet Connector

EVO-Con Collet Connector

Choke and Kill Mini-Connectors

22

PRESSURE CONTROL EQUIPMENT | RISER SYSTEMS

23

3.4 | RISER SYSTEMS

Cameron offers drilling riser systems that accommodate the stringent

conditions encountered in deepwater drilling, including high-tension loads,

multiple control lines and the need to respond to changes in surface

weather conditions. Riser sections are available in varying lengths, wall

thicknesses and with preps for buoyancy materials as required. Camerons

risers are supplied with integral choke and kill lines. Our hydraulic or

manual running tools are available for risers.

Riser Systems

Risers

RF

LoadKing

Spider

Telescoping Joint

FlexKing Flexible Joint

Robo-Spider

Gimbal

Termination Spool

Fill-up Valve

Riser Running Tools

RF Riser

LoadKing Riser

RF Riser

The RF riser connector is designed to meet API 16R requirements with fewer

components and a higher capacity than other flanged riser connectors. It also

is designed to meet the needs of the drilling industry for a deepwater riser

system that is less costly and quicker to operate than conventional systems.

RF riser connectors are available with tension ratings up to 2.0 MMlb.

LoadKing Riser

Camerons LoadKing family of riser connectors is designed to

meet the demands of ultra-deepwater drilling in water depths of

7000 ft (2134 m) or more. LoadKing riser connectors are available

with tension ratings of 2.5 MMlb through 4.5 MMlb. LoadKing

riser connectors incorporate many of the features of the RF riser

connector while holding the weight of the riser joints to less than

2% heavier than a comparably equipped RF riser joint.


24

Camerons LoadKing Riser


25

Spider

Gimbal

Telescoping Joint

Riser Joint

Riser Joint

Riser Joint with Buoyancy

Fill-up Valve

Termination Spool

CAMERONS RISER SYSTEM SCOPE OF SUPPLY


26

FlexKing Flexible Joint

Camerons drilling risers FlexKing flexible joint is intended to permit relative angular

displacement of the riser elements without excessive bending stresses. The flexible

joint assembly, with connections on opposite ends, has concentric axial center lines

180 degrees apart when not in service. An internal flexible element permits the

flexible joint omni-directional flexure, which is limited to plus or minus 10 degrees,

such that the top and bottom connector axial center lines may be at a maximum of

170 degrees relative to each other.

Telescoping Joint

Camerons telescoping joint consists primarily of two pieces, an inner barrel and an

outer barrel. To compensate for changes in rig-to-stack distance, the CAMERON

telescoping joint is extended by securing the inner barrel to the diverter and the

outer barrel to the riser, thus allowing the inner barrel to stroke. The loops in the

connection fluid lines are then extended to meet the changing vertical distance. The

lower ends of these lines are attached to external goosenecks on the outer barrel of

the telescoping joint or on the RST ring.

Spider

Camerons spider is used to run riser sections through rotary tables up to 75.5 in

diameter. Retractable dogs are hydraulically activated to support the riser string.

The spider is operated through the drillers panel, eliminating the need to manually

retract and extend the six dogs.

PRESSURE CONTROL EQUIPMENT | DIVERTERS

3.5 | DIVERTERS

Camerons diverter systems consist of housing,

outlet valves, running tools, a controls system,

a diverter assembly, overshot packers and

storage skids. Offered in CF-A and CF-B

models, our diverters all are fully customizable

and designed to provide easy running and

retrieval of the diverter assembly. Corrosion-

resistant alloys are applied to sealing surfaces

to reduce wear and prolong service life.

Housings are available for 49.5, 60.5, 75.5

and 78 rotary tables with hangoff capacities

of up to 2.5 MMlb. The CF-A model features

a single annular packing element capable of

sealing around various pipe sizes, along with an integrated running and test

tool with a high-load rating of 1.5 MMlb to 2.5 MMlb. The CF-B model

features insert packers for virtually every size of pipe or casing available, with

pressure ratings up to 2000 psi.

CF-A Diverter

CF-A Diverter Running and Test Tool

CF-B Diverter

CF-B Diverter Running and Test Tool

Diverter Housing CF-A Diverter CF-A Running Tool

CF-B Diverter

27

Land and Platform Hydraulic

Subsea Direct- and Piloted-Hydraulic

Subsea Electro- Hydraulic Multiplex (EH MUX) Systems

MUX Mark III Control System

PRESSURE CONTROL EQUIPMENT | BOP CONTROL SYSTEMS

As a leading supplier of BOPs, Cameron is uniquely qualified to design,

manufacture, install and service drilling control systems tailored to the

specific requirements of Camerons BOPs. By providing superior design,

dependable performance and excellent field service, Cameron is an

industry leader in the supply of drilling control systems for land, platform

and subsea applications. Available controls range from simple-hydraulic to

all-electric systems.

BOP control systems from Cameron feature a

modular design using pre-engineered, field-

proven components. The unique modular design

allows simple installation and retrieval of the

control pod utilized in our multiplex (MUX)

systems, which leads to reduced maintenance

time and costs. Camerons control systems

feature the latest technology with new advances

in safety and functionality, providing for

operational efficiency.

3.6 | BOP CONTROL SYSTEMS

Land and Platform Hydraulic

Camerons hydraulic control systems for land

and platform BOPs supply hydraulic fluid used

to operate the stack and associated equipment.

These systems feature field-proven and reliable

components designed for dependability and

field serviceability. The valves use sliding

CAMERON metal-to-metal shear seals for

maximum tolerance of fluid contamination.

28

PRESSURE CONTROL EQUIPMENT | BOP CONTROL SYSTEMS

Subsea Electro-Hydraulic Multiplex (EH MUX) Systems

Camerons compact, lightweight subsea EH MUX drilling control

systems combine modular, field-proven components with dual-

redundant electronics to provide the rapid actuation required of

BOPs operating in deep water.

For operating equipment in shallower water depths, Cameron

offers direct-hydraulic and piloted-hydraulic drilling control

systems to deliver superior BOP control at an economical cost.

Like the EH MUX systems, the piloted systems offer robust, field-

proven components, but are controlled via electric connections

between the surface controls and subsea control pod.

29

PRESSURE CONTROL EQUIPMENT | CHOKE AND MANIFOLD SYSTEMS

Camerons choke and manifold systems manage well pressure fluctuations

encountered during drilling by diverting flow through a series of valves and

chokes. Service applications range from non-corrosive to extreme sour oil

and gas applications. Camerons drilling chokes, manual or hydraulic, allow

maximum operational flexibility and control in working pressures from 5000

psi to 20,000 psi, and field-replaceable components simplify maintenance.

All manifolds can be controlled remotely or via a local control panel.

3.7 | CHOKE AND MANIFOLD SYSTEMS

Drilling Chokes

Choke Manifolds

Drilling Choke

Offshore Manifold Onshore Manifold

30

PRESSURE CONTROL EQUIPMENT | CHOKE AND MANIFOLD SYSTEMS

Offshore Manifold System

31

Cameron offers a wide range of valves to control and direct the flow of oil

and gas from the drillfloor to the end user, with designs that include slab

gate valves, check valves and butterfly valves.

3.8 | VALVES

MCS Gate Valves

MS Check Valves

FLS Gate Valves

FLS-R Gate Valves

PRESSURE CONTROL EQUIPMENT | VALVES

32

MCS Gate Valves

Camerons MCS gate valves one-piece seat design, featuring exclusive spring

barrier seals, prevents valve body erosion, provides consistently reliable low-

pressure sealing and reduces gate and seat wear. The MCS also incorporates

many of the popular features from Camerons portfolio of gate valve designs,

including one-piece gate design and a minimal number of cavity parts for easier

service.

Available in 3 10,000 psi and 15,000 psi working pressures and featuring

field-proven, metal-to-metal sealing, the MCS gate valves detachable actuator

requires only 5 clearance and can be removed without removing the valve from

the line. The valve is available for normal-close and normal-open applications, and

its body styles include dual-block, straight and target configurations.

FLS-R, FLS Actuated

FLS

Working Pressure (psi)

Bo

re S

ize

(in

.)

11

9

7-1/16

6-3/8

5-1/8

4-1/16

3-1/16

2-9/16

2-1/16

1-13/16

0

0 2000 3000 5000 10,000 15,000 20,000

PRESSURE CONTROL EQUIPMENT | VALVES

33

FLS Gate Valves

Camerons FLS gate valve is a full-bore, through-conduit valve available in standard

double-flange, threaded-end and special block body configurations. It is a forged valve

available in pressure ratings from 2000 psi to 20,000 psi and bore sizes from 1-13/16 to

9. As Camerons standard valve, the FLS gate valve can be fitted with a wide range of

Camerons actuators.

The FLS gate valves bi-directional design provides flow direction versatility and

maximum service life. Featuring metal-to-metal sealing (gate-to-seat and seat-to-body),

the valves simple, reliable gate and seat design promotes ease of field service and

minimal spare parts inventory. Two spring-loaded, pressure energized, non-elastomeric

lip-seals between each seat and body assist in low-pressure sealing. They also protect

against intrusion of particle contaminants into the body cavity and seal areas.

The valves stem seal design covers a full range of pressures, temperatures and fluids

encountered in wellhead and manifold service. The stem can be back seated to allow

stem seal replacement with the valve under pressure.

GATE VALVE APPLICATION GUIDE

PRESSURE CONTROL EQUIPMENT | TECHNOLOGIES

3.9 | TECHNOLOGIES

Cognition

Camerons Cognition Stack Instrumentation Infrastructure

Package provides a data and power infrastructure for

sensors fitted to the lower stack and LMRP of new

or existing subsea BOP assemblies. The infrastructure

features multiple redundant techniques and access points

for powering sensors and reading data. Innovations

include redundant subsea BOP black box data recorders

which log all BOP operator, control, feedback and sensor

information for several weeks of operation and can be

recovered by ROV for forensic analysis.

Cognition provides a network infrastructure where there

are neither power nor data channels normally available.

Installers choose what sensors to add as Cognition accepts

all common industry sensor signals. The infrastructure

can also be leveraged to provide access to invaluable

diagnostic data to minimize BOP downtime and proactively

manage maintenance.

In addition to conventional ROV stab access points, ROV-

based inductive data and power connections are offered

for reliable, high-capacity connectivity. A fourth means

of powering and communicating with the network is via

acoustic systems which can also provide local power. Each

connection is capable of energizing sensors and reading

data from local subsea data historians independently of

the native BOP control system. Multiple access points are

distributed around the LMRP and lower stack to maximize

the likelihood of one being accessible following damage or

interference by debris. Any one connection point provides

access to all Cognition sensor data, thus providing

unprecedented redundancy.

LMRP ROV Wireless Data and Power Connection Point and ROV Retrievable Black Box Recorder

Lower Stack ROV Wireless Data and Power Connection Point and ROV Retrievable Black Box Recorder

Sensor Interface Box and Acoustic Communication Unit

34


The two main components of the ESG system: surface BOP stack (left) and ESG subsea module (right).

ESG (Environmental Safe Guard) System

Camerons ESG system is a safe, reliable and cost-effective

alternative to traditional subsea drilling practices, combining field-

proven equipment into an evolutionary new system.

Camerons ESG system, evolving traditional methods one step further,

utilizes a floating vessel equipped with a combination of subsea and

surface modules. The subsea portion, at only a fraction of the size

and weight of a traditional subsea stack, is used to shear, seal and

disconnect from the seabed while the traditional surface BOP stack

handles all the well control functions.

The subsea stack consists of upper and lower wellhead connectors, a

ram-type BOP with shearing blind rams and a mini (acoustic, electric,

ROV-actuated or hydraulic) control system. The subsea portion is

connected to a traditional surface BOP stack via a high-pressure riser

system, Camerons exclusive triple-barrel telescoping joint and a

motion compensation system.

In the event of an emergency, the control system is used to signal the

subsea BOP to shear the pipe. Once the shearing blind rams shear

and seal off the bore, the control system is used to signal the upper

connector to disconnect, allowing the rig to be moved safely off

location with minimal loss of drilling or well fluids.

Three-barrelTelescoping

Joint

Tensioning System

Surface BOP Stack

Casing/Riser

Wellhead

Collet Connector

Collet Connector

BOP with Shearing Blind

Rams

35


18-3/4 15K SSSS BOP

New to the industry, the Super Shear Sealing System (SSSS) BOP offers increased

safety and environmental protection while drilling deeper, more complex wells in

harsh environments. The 18-3/4 SSSS BOP features a working pressure of 15,000

psi and tandem booster bonnet configuration. The SSSS is an evolution from proven

technologies to meet requirements beyond what is required in the industry. Combining

multiple features and technologies from existing BOP models, the system is designed to

cut the pipe and seal the wellbore effectively with the push of a button. The SSSS Ram,

built exclusively for the SSSS BOP, features a compound V-shaped blade configuration

and is capable of shearing and sealing full wellbore pressure after shearing 6-5/8

HWDP and 13-3/8 casing. The BOP is considered temperature class XX per API 16A.

Capping Stack

Building on a legacy of innovative BOP products, Cameron now designs and

manufactures capping stacks. These stacks provide an additional method for safely

shutting in a well or diverting the flow to a containment system. These small,

lightweight stacks, varying in size and working pressure, are designed to fit on top of a

subsea BOP stack or wellhead and can be configured per customers request.

36

DRILLING EQUIPMENT | ROTATING SYSTEMS

Camerons Top Drive

38

Built tough to withstand demanding drilling applications, Camerons top drives

and rotary tables are manufactured for high performance and reliability.

4.1 | ROTATING SYSTEMS

DRILLING EQUIPMENT | ROTATING SYSTEMS

Top Drives

Rotary Tables

Top Drives

Cameron offers a range of 500-ton to

1250-ton AC-driven top drive systems for

demanding drilling applications. We offer

reliable gearbox designs with helical-cut gears

as well as gearbox-free DirectDrive designs.

Rotary Tables

Camerons rotary tables, ranging from 27-1/2

to 60-1/2, feature a large oil capacity that

adds to the units durability. The rotary tables

include a forged-steel fabricated housing and a

heat-treated forged-steel turntable. Each rotary

table is supplied with spiral-bevel, induction-

hardened gears and two independent ratchet-

type locks, with lever access from the top, to

lock the table in position.

39

Cameron provides a range of high-performance hoisting equipment

designed to enhance safety and reduce maintenance.

4.2 | HOISTING SYSTEMS

Drawworks

Traveling Blocks

Derricks

Deadline Storage Reels

Utility Winches

Deadline Anchors

Wireline Units

Drawworks

Cameron offers AC gear-driven

drawworks concepts for onshore and

offshore applications. A wide range of

models are available in single-speed or

three-speed designs with up to 6000-

hp ratings. Cameron offers technically

advanced gear-driven, active-heave

drawworks systems with up to 11,200-hp ratings that are capable

of compensating movements on large floaters and drillships.

DRILLING EQUIPMENT | HOISTING SYSTEMS

AC Gear-driven

UltraHoist

UltraHoist AHC

UltraHoistAC Gear-driven

40

Traveling Blocks

Cameron offers a range of traveling blocks, from 275-ton

to 1250-ton models. Precise weighting of our traveling

blocks ensures fast free-fall, while their streamlined,

compact design eliminates interference with mast or

derrick components. The long service life of our traveling

blocks is enhanced through quality fabrication and the

advanced metallurgy of sheaves, beckets and components.

Camerons traveling blocks feature low-inertia sheaves for

high performance and reliability.

Derricks

Cameron delivers a variety of drilling derricks, purpose-

built to meet our customers preferences with respect

to loading and operational conditions. We design and

fabricate to comply with all industry standards using

the latest 3D design tools, focusing on low weight and

life cycle cost, easy fabrication, quick quayside erection

and complete interfaces with drilling and third-party

equipment. Derrick structures are available in various

configurations for fixed or floating platforms, to handle

triples and quads, and ratings up to 1250 ton at the

top drive stem, and are supplied to a number of vessel

specifications. API monogramming is also available.

DRILLING EQUIPMENT | HOISTING SYSTEMS

500-ton 1000-ton

41

4242

Cameron delivers a full range of high-performance handling systems for

a variety of applications. Our designs can be customized to accommodate

customer specifications. Our BOP handling equipment is designed and built

with a focus on easy maintenance, durability and the ability to withstand

the harshest environments. For vertical and horizontal pipe handling

solutions, Cameron delivers tailor-made, standalone equipment as well as

complete systems.

4.3 | HANDLING SYSTEMS

Cellar Deck Equipment

Monorail Hoist

Overhead Crane

BOP Fork Crane

BOP Forklift Carrier

BOP Moonpool Trolley

BOP Trolley

BOP Hoist

Trip Saver Trolley

BOP Skids

Subsea Tree Skids

Subsea Tree Handling Cranes

Stab in Connection System (STiCS)

Casing Guide

DRILLING EQUIPMENT | HANDLING SYSTEMS

CELLAR DECK EQUIPMENT

Stab in Connection System (STiCS)

Camerons STiCS (patent pending) is a

remote-operated system for connectors

on the telescoping joint. The design of the

STiCS reduces time and hazards ordinarily

occurring during connecting choke, kill

and other connectors.

BOP Handling Equipment

Camerons BOP handling equipment

is developed to fit a range of

operations, from small jackups to large

semisubmersibles and drillships. Our BOP

handling systems are designed to minimize

the risk of disposal to sea, delivered

according to recognized standards and

tailored to fit customer needs.

SmartRacker

Camerons SmartRacker products fulfill any pipe

handling functions on a modern drillfloor. With

their main functions driven by AC technology, our

SmartRackers perform tripping and standbuilding

safely and efficiently. The design includes advanced

features, but is simple to use and produces smooth

and accurate movements.

X-Racker

With a six-tonne lifting capacity and availability

in doubles or triples, Camerons X-Racker column

racker comes in several variations. The design can be

automated or remotely controlled and includes the

option of an HTV or standbuilding.

BridgeRacker

Camerons innovative, geometric BridgeRacker design

is suitable for floaters or jackups. The BridgeRacker

features a 10-tonne lifting capacity and offers manual

or remote control.

Two-arm Racking System

Camerons two-arm racking system is a cutting-edge

design built for floaters. With a 10-tonne lifting

capacity, this design offers manual or remote control.

Fingerboards

Cameron delivers three main types of fingerboards:

straight fingers and latches, straight fingers with

spears and circular fingerboards. All fingerboards are

tailor-made with respect to storage capacity, dynamic

considerations, interfaces, options and choice of

remote control or automated functionality.


Vertical Pipe Handling Equipment

Column Rackers

SmartRacker

X-Racker

BridgeRacker

2-arm Racking System

Fingerboards

Standbuilding Machine

VERTICAL PIPE HANDLING EQUIPMENT

SmartRacker

Fingerboard

43

44

Horizontal Pipe Handling Equipment

SmartCat Catwalk

Pipe Deck Crane

Pipe Deck Machine

Riser Handling Machine

Riser SmartCat

Riser Chute


HORIZONTAL PIPE HANDLING EQUIPMENT

SmartCat Catwalk

Camerons SmartCat catwalk moves multiple joints to and

from the drillfloor at one time, reducing catwalk running

time. The catwalk controls horizontal handling of tubulars,

and is safe and easy to work with. The design is fully

automated and interfaces with pipe handling, standbuilding

and top drive movements. In addition, the use of a skate

reduces friction and damage compared with pulling the

tubular on a ramp. The optional tail-in arm guides the pin

end of tubulars when moving from a horizontal to a vertical

position. Camerons catwalk is available in several versions for

jackups and floaters, with capacities from 45 36 OD casing

to 75 or 94 54 OD risers.

Pipe Deck Crane

Camerons pipe deck cranes come in a variety of

sizes for jackups and floaters. Each crane features a

direct connection to the load. The design includes

an operator-friendly cabin and onboard hydraulic

power unit (HPU).

Catwalk


Drillfloor Pipe Handling Equipment

Hydraulic Roughnecks

JiM 10

JiM 20

Cathead

Mousehole

Dual-skidding Mousehole

Rathole

Casing Stabbing Arm

Manipulator Arm

V-door Machine

Tail-in Arm

Tigerhead

Raised Back-up Stabber

Workbasket

Mud Bucket

Dolly

DRILLFLOOR PIPE HANDLING EQUIPMENT

JiM 10 Hydraulic Roughneck

Camerons JiM 10 hydraulic roughneck is an

advanced system for make up and break out of

drillpipe and drill collars, engineered for a tubular

range of 3-1/2 to 10. The JiM 10 roughneck

features a torque wrench in an articulated arm,

allowing the torque wrench and spinner assembly

to travel from parked position to well center. The

elevation system ensures that the JiM 10 roughneck

is capable of handling a wide range of stickups

with ease and high precision. The design of the

JiM 10 roughneck delivers a cost-effective, modern

hydraulic roughneck in a compact format. Featuring

an advanced control system, the JiM 10 keeps

safety in mind and is a sensible choice for todays

demanding drilling needs. Additionally, casing

modems are available for the JiM 10.

JiM 20 Hydraulic Roughneck

Camerons JiM 20 hydraulic roughneck embraces

a complete equipment package to perform

jointing operations on all tubular pipes used for

drilling, casing and completing the well. The JiM

20 handles spinning, make up and break out of

all drillpipes, drill collars, casing and tubing from

2-3/8 drillpipe to 20 casings by changing jaw

inserts. Roughneck tubing tongs and casing tongs

are replaced with the JiM 20 roughneck. The mud

bucket function on the JiM 20 roughneck eliminates

the need for traditional mud bucket operation.

Automatic high-pressure thread cleaning and

doping also is included in the JiM 20 roughneck

to eliminate manual intervention. The JiM 20

roughneck package includes instruments and

controls adaptable to most rig control systems.

Floor rails or a column can be provided to suit the

drillfloor arrangement, and a torque/turn system is

included.

45

DRILLING EQUIPMENT | RIG CONTROL SYSTEMS

Cameron delivers a complete range of drilling control rooms, advanced

operator chairs, drilling instrumentation systems and monitoring systems

for multiple types of onshore and offshore drilling applications. Our systems

feature high-quality software and easy-to-use screen graphics, and our

secure and efficient network is capable of interfacing with equipment from

third-party vendors.

4.4 | RIG CONTROL SYSTEMS

Drilling Control Rooms

Operator Chairs

Drilling Instrumentation Systems

Drilling Control Systems

Tool Joint Assist

Torque/Turn System

Conventional Drillers Console

46

Drilling Control Rooms

Camerons drilling control rooms are

tailored to the customers drillfloor

layout. Each unit is ergonomically

designed to the highest standards and

features large windows with excellent

views and a purpose-designed

washer/wiper system. The design

provides insulation against noise and

vibration and includes wall space

for BOP/auxiliary panels. Cameron

offers a range of additional options to

meet customer requirements. Rooms

designed for one to five X-COM chairs

are available.

DRILLING EQUIPMENT | RIG CONTROL SYSTEMS

X-COM Operator Chairs

Camerons X-COM operator chairs

are ergonomically designed for 24/7

operation. The innovative, user-friendly

human-machine interface (HMI) makes

the X-COM very simple to operate. The

software is tested prior to installation

and customers receive a reduced

commissioning cost. The X-COM is also

an ideal option for crew training as

simulation software can be loaded into

the control system.

Drilling Control Systems

Camerons drilling control systems

provide the full range of control needed

to integrate drilling equipment and

drilling processes. Our systems offer

the driller and assistant driller optimal

monitoring and controls with key

decision-making information.

47

DRILLING EQUIPMENT | POWER SYSTEMS

Cameron delivers leading power systems and products through innovative

thinking, a commitment to advanced technology and a dedication to

meeting customers needs. We offer technologically advanced equipment,

customized to meet customer requirements and rig specifications. Cameron

manufactures a range of AC and DC electrical equipment to provide

solutions that enhance control, safety and performance. In addition,

Cameron offers a line of hydraulic power units (HPUs), available in three-,

four- and five-pump models, designed to the highest standard, with a focus

on low noise, easy maintenance and low life cycle cost.

4.5 | POWER SYSTEMS

Switchgear and Engine Generator Controls

AC Motors

HVAC System

VFDs

SCR Systems

Fabricated Power Control Room

HPUs

HVAC System

Camerons HVAC system is designed for continuous

operation, with 100% redundancy in the supply fans.

The HVAC system consists of a supply fan skid with two

redundant fans, a condenser unit for outdoor mounting

in hazardous areas, internal fan coils and space for free-

issued items. The HVAC system is a pressurization system,

which classifies the drilling control room as a pressurized

room, according to IEC 60079-13.

AC Motors

Camerons AC-electric motors are engineered

to improve the performance of customers mud

pumps, drawworks or rotary tables. Custom

configuration is available, and ATEX, ABS and DNV

certification can be provided for new motors. Our

flexible design offers customers a choice between

a tapered shaft or BullShaft to meet specific

application requirements.

48

DRILLING EQUIPMENT | POWER SYSTEMS

Hydraulic Power Units (HPUs)

Camerons HPUs deliver steady hydraulic pressure and

flow to all hydraulic consumers. The design of the HPU

focuses on providing easy operation and maintenance.

It also features remote supply-pressure readout, an

integrated inspection hatch, a local tank level/temperature

readout, and is fabricated with top-quality components

and materials. Camerons HPUs have an onboard oil

cooling system, which includes a titanium plate cooler

for seawater service, local pressure gauges and shut-off

valves for easy maintenance of the cooler.

Variable Frequency Drives (VFDs)

Cameron VFDs are available in air-cooled and liquid-

cooled models designed to control the speed and torque

of AC motors. The VFD are compact in size and designed

for efficiency, productivity and reliability. This high power

factor combined with a low-maintenance modular

composition results in greater fuel economy, minimal

maintenance costs, easy servicing and reduced spares.

Cameron can provide VFD configured as single units or

arranged into a common DC bus. If your system requires

harmonic mitigation, then the VFD can be supplied

with phase shifted rectifiers or active harmonic filtering.

Motor regenerative energy is effectively managed

through dynamic braking resistors. Cubicles are front

accessible and easily integrated into switchgear or

installed into fabricated power control rooms.

Cameron VFD feature programmable, digital controls

that interface with many standard communications

protocols. Factory load testing and functional routines

are conducted for quality assurance and maximum

performance.

49

DRILLING EQUIPMENT | CIRCULATING SYSTEMS

Cameron offers a comprehensive range of circulating systems equipment.

Our products are designed to streamline many essential, yet time-

consuming, operation and maintenance procedures while improving

operator safety and productivity.

4.6 | CIRCULATING SYSTEMS

Mud Pumps

Mud Control Systems

Mixing and Additive Systems

Caustic Mixing Units

Sack Dosing Units

Big Bag Units

Liquid Additive Skids

Mud Mixing Hoppers

High-rate Mixers

Bulk Storage and Transfer Systems

Bulk Mud and Cement Storage Silos

Surge Tanks

Dust Cyclone and Collector Units

Loading Stations

Loading Hoses

Rock Catchers

Sampling Units

Mud Pumps

Cameron manufactures high-performance, robust mud pumps for onshore and offshore oil and

gas drilling applications. Each mud pump features a one-piece, forged and fabricated alloy-steel

crankshaft for smooth operation and enhanced longevity. In addition, our mud pumps include

a welded-steel power frame, forged alloy-steel pinions and gears, and triple-redundant power-

end lubrication. Prior to delivery, our mud pumps are tested in our quality control facility to verify

performance expectations. Camerons mud pumps can be furnished with fluid-end modules to

match customers existing inventory and can be purchased as part of Camerons integrated pump

packages, along with electric drives, controls, manifolds, piping and accessories.

Cameron offers two series of mud pumps: the WH and W models. The WH-Series mud pumps,

developed for increased mobility, deliver high performance in a compact design. These pumps

are available from a 1300-hp to 2000-hp rating and feature a smaller footprint and less weight,

making them ideal for applications where space is limited.

The W-Series mud pumps, available from a 1600-hp to 3000-hp rating, are built for durability,

longevity and are designed with a welded power-steel frame that features supplementary steel for

operational efficiency. The W-Series line includes robust, high-pressure, low-maintenance pumps

to increase drilling performance.

WH-Series W-Series

50

DRILLING EQUIPMENT | CIRCULATING SYSTEMS

Mud Control Systems

Camerons mud control system includes operator menus that utilize the latest in

HMI application development to provide optimal overview, safety and productivity.

Our products offer enhanced visualization, providing better insight into the drilling

fluid process operation, real-time monitoring of drilling fluids equipment from local

and remote locations and logical control and monitoring of individual equipment

and complete systems to reduce the risk for human error. Our control systems can

be engineered as standalone systems or for integration with other control systems,

such as Camerons OnTrack drilling control system.

51

WELL INJECTION WELL FROM WELL (Mud)

SLOPSMUD SYSTEM 1

MUD SYSTEM 2 BULK SYSTEM

CUTTINGS

HPSYSTEM

MUD CONTROLSYSTEM

LPSYSTEM

LOADINGSTATION

ACTIVETANKS

MUDTREATMENT

SLOP SYSTEM

CUTTINGSHANDLING

WELLCONTROL

MIXSYSTEM

BULK(Barite)

BULK(Cement)

CEMENTING UNITSTANDPIPE MANIFOLD

ACTIVE SYSTEM RESERVE/MIX SYSTEM

DRILLING EQUIPMENT | MUD PROCESSES

52

WELL INJECTION WELL FROM WELL (Mud)

SLOPSMUD SYSTEM 1

MUD SYSTEM 2 BULK SYSTEM

CUTTINGS

HPSYSTEM

MUD CONTROLSYSTEM

LPSYSTEM

LOADINGSTATION

ACTIVETANKS

MUDTREATMENT

SLOP SYSTEM

CUTTINGSHANDLING

WELLCONTROL

MIXSYSTEM

BULK(Barite)

BULK(Cement)

CEMENTING UNITSTANDPIPE MANIFOLD

ACTIVE SYSTEM RESERVE/MIX SYSTEM

DRILLING EQUIPMENT | MUD PROCESSES

53

DRILLING EQUIPMENT | MOTION COMPENSATION/TENSIONING SYSTEMS

Cameron delivers motion compensation equipment for the drillstring

and riser, enabling floaters to operate in the harshest environments. Our

equipment is designed and fabricated to the highest quality standards to

offer years of accurate and reliable operation. We have incorporated many

novel ideas to achieve easier operation and reduce maintenance than

competing products.

4.7 | MOTION COMPENSATION/ TENSIONING SYSTEMS

Top-mounted Compensators

Camerons top-mounted compensator systems are used to

compensate for the relative movement between the drilling

vessel and seabed. The compensator is highly accurate, with a

25-ft (8-m) stroke and optional active cylinder, and is supplied

with an accumulator, valve block skids, APVs, control system

and optional air compressors. Two versions are available,

either 1000 kips or 1500 kips, and are delivered as a unit.

Production Riser Tensioner Systems

Camerons production riser tensioner system includes the

production riser tensioner units and the production riser

tensioner control panel. The production riser tensioner unit is

designed to maintain the production riser system in tension to

prevent buckling under compressive loading from self-weight

and to compensate for ocean currents, waves and relative

movements between the platform and the riser.

Wireline Riser Tensioners

Camerons wireline riser tensioners are designed to maintain

the riser string in tension on floating vessels. Two versions

are currently available. The 200 or 250 kips double wire

rope tensioners include idler sheaves, wire, rotating deadline

drum, valve block skids, APVs, control system, anti-recoil and

optional air compressors.

54

Production Riser Tensioner Systems

Top-mounted Compensators

Wireline Riser Tensioners

CAMSERV | TRAINING

Camerons Drilling Systems divisions training department is your complete source of knowledge and

training for you and your workforce. Raising the awareness and knowledge of your employees can

be the difference between smooth operations and days of downtime. Cameron offers two different

five-day instructor-led courses (electrical training and hydraulics training topics) for control systems,

as well as mechanical courses for land and/or subsea systems and Camerons BOPs. Our instructor-

led classroom training covers fundamental concepts and can include specific component-level

operations and real-world scenarios. Small class sizes allow for in-depth Q&A time, and additional

attention can be spent focusing on your systems needs.

5.1 | TRAINING

56

CAMSERV | ADVANCED SOFTWARE AND SUPPORT

Remote Access Center

Our remote access center offers direct online support to rigs and vessels,

which enables our experts to provide support for troubleshooting equipment

and identifying faulty components, as well as problem-solving guidance.

The remote access center often can solve a problem without sending a

technician to the work site.

Laboratory

Camerons software is developed in a dynamic 3D HIL test simulator

environment. Furthermore, test activities normally carried out during

commissioning are verified at equipment delivery. All software is developed in

accordance with DNV-RP-D201.

Simulation

Camerons drilling simulator is used to train the rigs operational and

maintenance crews by providing familiarization of the machinery and

control stations, sequences collaboration, manual operation and unexpected

scenarios. In addition, the simulator also aids in internal training to ensure

that our service personnel are continually updated with the latest features

and equipment.

Utilizing 3D models, Camerons drilling simulator is based on the equipment

and machine software that is used on the rig, which reduces variability

between real life and simulator operations. The operator is able to reverse,

stop or change the operation at any time. The simulator training is suitable for

those participants who have previously taken Camerons operational training.

Camerons Drilling Simulator Main Components:

X-COM Operator Stations

Instruction Station Computer

PLC Simulator Computer

3D Model Simulator Computer

3D Visualization System

Audio System

5.2 | ADVANCED SOFTWARE AND SUPPORT

57

Camerons focus on technology extends

across traditional product boundaries. By

integrating TRANSACT, Camerons advanced

and interactive online system, into our

website, our customers have access to:

Technical Library engineering bulletins,

technical manuals, data and information

sheets, etc.

Document Ordering flyers, brochures

and catalogs

Shear Calculation Tool

5.3 | TRANSACT

58

CAMSERV | TRANSACT

59

5.4 | AFTERMARKET SERVICES

With Camerons CAMSERV Aftermarket Services, you

have a world of resources at your command around the

clock and around the globe. Dedicated to optimizing your

operations and reducing your total cost of ownership, we

have the most locations worldwide, staffed with qualified

people who are accessible 24/7, so you are never without

service when you need it. Whats more, our integrated

systems and advanced processes enable us to provide faster

turnaround. And, as the OEM, we know our products

better than anyone and know how to best service them.

Comprehensive Services Expertly Delivered

As the market leader in aftermarket services, we provide flexible solutions

through five main areas that lower the total cost of ownership of your

equipment:

Parts Immediate delivery of genuine OEM replacement parts for many

Cameron products.

Field Services Field service technicians are available around the world 24/7

to provide a wide variety of services that range from field repairs to preventive

maintenance, technical support and training.

Repairs Service centers offer a full range of equipment repair services,

including disassembly, inspection, reassembly, testing and parts replacement.

Remanufacturing Provides remanufacturing of oilfield equipment to

return products to first-class, fit-for-function or working-condition

performance standards.

Asset Management Provides a range of asset management services,

including storage/warehousing, utilization, brokering, buy-back and exchange.

CAMSERV | AFTERMARKET SERVICES

CURRENT CAMSERV LOCATIONS

NEW & EXPANDING CAMSERV LOCATIONS

GRANDE PRAIRIE, ALBERTA

MINOT, NORTH DAKOTA

ODESSA, TEXASBASRA, IRAQ

GAOMI, CHINA

ABERDEEN, SCOTLAND

LUANDA, ANGOLA

YUZHNO-SAKHALINSK, RUSSIA

OSLO, NORWAY

TAKORADI, GHANA

MARCELLUS SHALE

RUGBY, ENGLAND

BOGOT, COLOMBIA

KRISTIANSAND, NORWAY

PERTH, AUSTRALIA

SINGAPORE

CAMSERV | GLOBAL COVERAGE MAP

5.5 | GLOBAL COVERAGE MAP

60

CURRENT CAMSERV LOCATIONS

NEW & EXPANDING CAMSERV LOCATIONS

GRANDE PRAIRIE, ALBERTA

MINOT, NORTH DAKOTA

ODESSA, TEXASBASRA, IRAQ

GAOMI, CHINA

ABERDEEN, SCOTLAND

LUANDA, ANGOLA

YUZHNO-SAKHALINSK, RUSSIA

OSLO, NORWAY

TAKORADI, GHANA

MARCELLUS SHALE

RUGBY, ENGLAND

BOGOT, COLOMBIA

KRISTIANSAND, NORWAY

PERTH, AUSTRALIA

SINGAPORE

CAMSERV | GLOBAL COVERAGE MAP

Cameron operates around the world from

more than 300 locations that reach virtually

all of the worlds oil and gas operating

basins. Our global network of sales,

service and strategically located in-house

manufacturing centers means customers

benefit from faster ordering times, quicker

deliveries and easier access to Cameron

professionals, no matter where your

operations are located. Count on Cameron

to be there, anywhere we are needed.

61

2014 Cameron | CAMERON, EVO and WORKHORSE are registered trademarks of Cameron. AGGRESSOR, BridgeRacker, BullShaft, CAMLAST, CAMRAM, CAMRAM 350, CAMSERV, CAMULAR, DirectDrive, DUROCAM, ESG, EVO-Con, EVO-Loc, Finder, FLEXPACKER, FLEXPACKER NR, FLS, FLS-R, JiM 20, LETOURNEAU, LoadKing, OnTrack, RF, SmartCat, SmartRacker, TL, U, UltraHoist, UM, VBR, VBR-II, X-COM and X-Racker are trademarks of Cameron. | 03/14 AD01344DRL

4601 Westway Park Blvd.

Houston, TX 77041

USA

Tel +1 713 939 2211

Andyfaret 3

N-4623 Kristiansand S.

Norway

Tel +47 380 00 570

No. 100 Tuas South Ave 8

Offshore Marine Centre

Singapore 637424

Singapore

Tel +65 6577 1400

P.O. Box 127424

Abu Dhabi,

United Arab Emirates

Tel. +971 0 2 699 6300

5 The Heights, Brooklands

Weybridge, Surrey

KT13 0NY

United Kingdom

Tel +44 1932 452124

Learn more about Camerons drilling solutions at:

www.c-a-m.com or email [email protected]

HEA

LTH

SA

FETY

A

ND ENV

IRONMENTAL EX

CELLEN

CE

CAMERON

HSE Policy StatementAt Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed.

drilling products overview catalog

Documents