dress 166
DESCRIPTION
DRESSTRANSCRIPT
![Page 1: Dress 166](https://reader036.vdocuments.us/reader036/viewer/2022083018/577c77a21a28abe0548ce55c/html5/thumbnails/1.jpg)
DRESS-155 PROCESSINGTRANSFORMATION DRESS CASTDraw the base mold, sleeve, front and back.
Draw a curved line on the chest to the rotation of the clamp / pence.
Copy paper part of the rotation of the clamp / pence.
Cole close the clamp / pence shoulder and open the cava.
Draw the neckline on the fronts and backs.
Draw dress mold height.
Draw lines and widen the dress skirt side.
Draw and extend the medium back to the hem / . male
Draw the height of the sleeve.
Note: the dress base mold has not Sewing value has to be added. This dress model is well with
cloth / fabric in silk, lace, mesh, velvet, sable, satin, organza and all tissues that have good
fit. Clearance 5% (example 5 cm in a subway off) to confecionar this model, are necessary, fabric
1.80 meters. It takes two or a tissue height as the width of the part. Click on the link's below to
make your mold