drc-10-a - nordic drill · la foreuse tout-en-un the all in one drilling rig (819) 758-6468...
TRANSCRIPT
LA FOREUSE TOUT-EN-UN
THE ALL IN ONE DRILLING RIG
(819) 758-6468 [email protected]
DRC-10-ANORDIC DRILL
DOUBLE ROTATION CHENILLE JUSQU’À 10 POUCES GLISSAGE À ANGLE
DUAL ROTARY CRAWLER UP TO 10 INCHES ANGLE SLIDE
390 Ste-Hélène, St-Samuel Québec Canada G0Z 1G0
DOUBLE ROTATIONDUAL ROTATION
Précision en mort-terrain Accuracy in overburden
Meilleur performance en mort-terrain difficile Better performance in tough overburden conditions
Permet un bon échantillonnage Allows good sampling
Permet l’installation de crépine Allows screen intallations
Facilite le retrait du tubage Facilitates the extraction of the casing
Facile d’opération Easy operations
Offre une propreté en chantier Allows cleanliness on sites
SÉCURITÉ SAFETY
Offre des méthodes de forage sécuritaires Offers safe drilling methods
Munie d’un système d’Anti-Rotation Provided of an Anti-Rotation system
7912mm
311”
3172mm
125”
12814mm
504”
AVANTAGES DE LA DRC-10-A EN COMPARAISON À UNE FOREUSE « ROTARY » CONVENTIONNELLE
ADVANTAGES OF THE DRC-10-A COMPARED TO A CONVENTIONAL AIR ROTARY DRILL
457mm
18 457mm
18”
2541mm
100”
AVANTAGES DE LA DRC-10-A EN COMPARAISON À UNE FOREUSE « ROTARY » CONVENTIONNELLE
ADVANTAGES OF THE DRC-10-A COMPARED TO A CONVENTIONAL AIR ROTARY DRILL
CHENILLECRAWLER
Facilite la mise en chantier sur terrains à accès difficiles Facilitates set-up on difficult access sites
Endommage moins les sites de forage Less damage on drilling sites
Nécessite moins de préparation des accès Needs less preparation to job sites
Plus petit format Smaller rig
Plus légère lighter rig
ANGLE ANGLE
Utile au forage spécialisé Useful for specialized drilling applications
Utile aux applications minières Useful for mining applications
Permet le forage à circulation inversée Allows Reverce circulation drilling
Permet le forage pour encrage Allows drilling for anchors
Permet le forage pour pieux Allows piles drilling
8080mm
318”
2855mm
112”
5663mm
223”
2210mm
87”
90°
526mm
21”
4890mm
193”
1888mm
74”
Imprimé au Canada / Printed in Canada
(819) 758-6468 [email protected] Ste-Hélène, St-Samuel Québec Canada G0Z 1G0
Métrique English
Tête de forage / Top drive
Course / stroke 4,9 m 16 ft
Levage / hoist 14061 Kg. 31000 lbs
Vitesse de levage / hoist speed 16,15 m./min. 53 pi./min.
Descente / pull down 10660 Kg. 23500 lbs
Vitesse de descente / Pull down speed 21,65 m./min. 71 pi./min.
Torque / torque 8130 Nm 6000 ft x pds
Vitesse de rotation / rotation spped 0 - 90 RPM 0 - 90 RPM
Table d’entrainement / Lower drive
Course / stroke 3,1 m 10 ft
Levage / hoist 18575 Kg. 35000 lbs
Vitesse de levage / hoist speed 14,3 m./min. 47 pi./min.
Descente / pull down 12000 Kg. 26500 lbs
Vitesse de descente / Pull down speed 19,2 m./min. 63 pi./min.
Torque / torque 29150 Nm 21500 ft x pds
Vitesse de rotation / rotation spped 0 - 9 RPM 0 - 9 RPM
Ouverture maximum / maximum opening 30,5 cm 12 inches
Autres caractéristiques / other caracteristics
Moteur / engine Cat.C 6.6 (210 hp) Cat.C 6.6 (210 hp)
Course glissade du mat / slidind mast stroke 91,4 cm. 36 po.
Soudeuse / welding machine Hydraulique 225 Amp Hydraulic 225 Amp
Pompe à eau / water pump Quad Bean 68 lpm Quad Bean 18 gpm
Pompe hydrofrac / Hydrofrac pump 98,5 lts, 124 bars-
49 lts, 199 bars
26 gpm, 1800 psi -
13 gpm, 2900 psi
Treuil de levage / service winch 910 Kg. 2000 pds
Treuil frontal / front winch M12 5455 Kg. M12 12000 pds
Cuve à tige / Pipe tub 40 tiges de 8,9 cm 40 pipes of 3½ inches
Sécurité / Safety Anti-Rotation tête Anti-rotation top drive
Vitesse maximale / maximum speed 5 Km/hrs 3,1 M/hrs
Poids/Weight 13 410 Kg. approx. 29 500 pds approx.
DRC-10-A