drafting & layout - derusha supply · 14020121 30” x 100 yd 20# perf. gerber 14020122 24” x...
TRANSCRIPT
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
Drafting & Layout
SECTION 11
Measuring Tapes, Rulers & Triangles 11.2
Curves, Squares & Patterns 11.5
Scotchkut Diecutting Letters 11.6
Paper, Knives & Marking Accessories 11.7
Monument Stencil Cutter 11.10
Template & Vinyl Cutter 11.12
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 1
PDF Page: DS.p0231.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
11.2
center-FinD rulerSFairgate rulers and scales are manufactured from thehighest quality hard, tempered aluminum to provideyears of reliable service. Zero-point in center of rulerwith increments to left and right. Allows quick location of center between any two points. Especially useful inlayouts of lettering on stencil press machines. Bottomedge is a Standard ruler.
engliSh rulerSFairgate rulers and scales are manufactured from thehighest quality hard, tempered aluminum to provideyears of reliable service. Standard English ruler, calibrated two edges, one side; in 1/8ths, 1/16ths;Opposite directions, left to right.
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
Measuring Tapes, Rulers & Triangles
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
DS item # length & Width calibrations
14011328 12” x 1-3/4” 16ths, 32nds.
14011329 18 x 1-3/4” 16ths, 32nds.
14011330 24” x 1-3/4” 16ths, 32nds.
14011331 36” x 1-3/4” 16ths, 32nds.
14011332 48” x 1-3/4” 16ths, 32nds.
DS item # length & Width calibrations
14011322 30” x 1-1/2” 8th, 16ths
14011325 36” x 1-1/2” 8th, 16ths
14011326 48” x 2” 8th, 16ths
14011321 24” x 1-1/4” 8th, 16ths
DS item #
29912302
16’ StainleSS engliShmeaSuring tape
Description : 16’ x 1’’ NylonCoated Stainless Steel Blade.Dual side printing on non glaresilver blade. Durable rubberizedcase. English.
DS item #
29912303
25’ StainleSS engliShmeaSuring tape
25’ x 1’’ Nylon Coated StainlessSteel Blade. Dual side printing onnon glare silver blade. Durablerubberized case. English.
DS item #
29912304
5m/16’ StainleSSmetric/engliShmeaSuring tape
5 m/16’ x 1’’ Nylon Coated StainlessSteel Blade. Single side printing onnon glare silver blade. Durable rub-berized case. Metric and English.
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.2
PDF Page: DS.p0232.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
11.3
emBOSSeD engliSh rulerSFairgate rulers and scales are manufactured from thehighest quality hard, tempered aluminum to provide yearsof reliable service. This ruler is of a heavier gauge steelrather than aluminum; The graduation is deeper in thesteel and is designed for rough service.
engliSh & metric cOmBinatiOn
Fairgate rulers and scales are manufactured from thehighest quality hard, tempered aluminum to provide yearsof reliable service. English increments on bottom edge,metric increments on top edge. Calibrated twoedges, one side.
metric rulerSFairgate rulers and scales are manufactured from thehighest quality hard, tempered aluminum to provide yearsof reliable service. Calibrated two edges, one side in.,mm and cm. Opposite edges; left to right.
preSS Stamp rulerSFairgate rulers and scales are manufactured from thehighest quality hard, tempered aluminum to provide yearsof reliable service. Fairgate Rule Company is America'slargest manufac-turer of press-engraved black anodizedaluminum rules. These rules are designed primarilyfor use in factories, machine shops, cutting tableoperations, storage tanks or wherever ademanding environment" exists.
Measuring Tapes, Rulers & Triangles
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
DS item # length & Width calibrations
14011356 English / 36” x 1” 16 ths, 32 nds.
14011355 Center Find / 36” x 1” 16 ths, 32 nds.
DS item # length & Width calibrations
14011336 36” X 1” 8 th, 16 ths
DS item # length & Width calibrations
14011371 45 cm X 35 mm cm/mm
14011364 1,5 m X 35 mm cm/mm
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
DS item # length & Width calibrations
14011372 150 cm x 3,81 cm 16 ths/cm
14011359 100 cm X 3,49 cm 16 ths/cm
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.3
PDF Page: DS.p0233.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
11.4
clear acrYlic triangleSTriangles are precision made, moulded from the highestquality plastics. They are extremely durable and dimensionally stable.
triangleSFairgate triangles are precision made of rugged yet lightweight aluminum that resistsbreaking, chipping and gouging, even with heavy use or under severe conditions,such as found in the shop or at jobs sites. They will provide a life-time of service.Fairgate triangles are essential tools for commercial artists, draftsmen, architects,engineers, framers, craftspeople and hobbyists. Each triangle serves multiple dutieswith its incremented edge and built-in circle template.
45° / 45° / 90°triangleSMulti-purpose tool with incremented edge and built-incircle template. Excellent for both ruling and cutting.Calibrated one edge on side.
30° / 60° / 90° triangleSMulti-purpose tool with incremented edge and built-incircle template. Excellent for both ruling and cutting.Calibrated one edge on side.
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
DS item # Size14011459 6”14011460 8”14011455 10”14011476 12”14011461 14”14011304 16”14011477 18”
DS item # length calibrations circle templateSize range (number)
14011345 6” 1/16 th 1/32” - 31/32” (20)
14011346 8” 1/16 th 1/32” - 31/32” (20)
14011347 10” 1/16 th 1/16” - 1-3/8” (20)
14011348 12” 1/16 th 1/16” - 1-3/8” (20)
14011349 14” 1/16 th 1/16” - 1-3/8” (20)
14011350 16” 1/16 th 1/16” - 1-3/8” (20)
DS item # Size14011463 6”14011462 8”14011475 10”14011300 12”14011301 14”14011302 16”14011303 18”
30°/60° 45°/90°
DS item # length calibrations circle templateSize range (number)
14011340 8” 1-16 th 1/32” - 31/32” (20)
14011341 10” 1-16 th 1/32” - 31/32” (20)
14011342 12” 1-16 th 1/16” - 1-3/8” (26)
14011343 14” 1-16 th 1/16” - 1-3/8” (26)
14011344 16” 1-16 th 1/16” - 1-3/8” (26)
DS TECH TIPThe size of standard triangles are determined by the length of the side that joins the hypotenuse to the base. This is also the edge that is calibrated.
Measuring Tapes, Rulers & Triangles
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.4
PDF Page: DS.p0234.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
11.5
l SQuareFairgate L-squares are essential instruments for fashion designers, picture framers, and artists. These sturdy aluminum tools will provide a lifetime of services, yet they are lightweight and easy to handle. Precision incrimination and clear, easy to read numerals help assure consistent, accurate results.
t-SQuareS ( 9” heaD )Fairgate manufactures quality T-squares in lengths from 12" to 96". All feature hard, tempered aluminum blades that ensure accuracy and long life. The result is a precision tool that is lightweight, yet tough enough for the rigors
of daily use.
Curves, Squares & Patterns
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
DS item # length & Width calibrations
14011351 24” x 1-1/2” 8 th, 16 ths
14011352 36” x 1-1/2” 8 th, 16 ths
clear acrYlic Straight eDge2" wide x 3/16" thick non-calibrated clear acrylic with planned edges for trueness.Transparent, to see through for better line plotting.
DS item # length & Width calibrations
14011337 24” none
14011338 36” none
14011339 48” none
curveS - irregular curveSIrregular curves are made of gray-tinted plastic. They have inking edges on both sides, which permit use of the curveeither side up. COLLEGE irregular curves in the most popular configurations are available as a set.
OmnigraphMulti-function template.
DS item # length & Width calibrations
14011360 12” x 6” 1/8 ths, 16 ths, 24 ths
14011362 24” x 14” 1/8 ths, 16 ths, 24 ths
14011369 12” x 6” 1/8 ths, 16 ths, 24 ths
DS item # (571 40 Wp)14011445 Set of 3
DS item #14011365
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.5
PDF Page: DS.p0235.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
11.6
Scotchkut Diecutting Letters
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
A
B
C
D
E
Font type Sizes SO (Single Outline)
DO (Double Outline)
ShO(Shadow Outline)
A Common Gothic 3/4” to 2-1/2” X
B Government 1/2” to 1-1/2” X
C Classic Roman 3/4” to 1-1/2” X
D Vermarco 5/8” to 3-1/2” X
E Shadow Outline 2” to 3-1/2” X
F Raised Modified Roman 3/4” to 3-1/2” X
G Modified Roman 3/4” to 3-1/2” X
H Double Outline 1” to 4” X
I Old English 3/4” to 2” X
J Polished Edge 3/4” to 3” X
K Vermarco 1” to 3” X
L Hebrew 3/4” to 1-1/2” X
M Modern Roman 3/4” to 3” X
N Condensed Roman 3/4” to 3-1/2” X
F
G
H
I
J
K
L
M
N
call uS tO DiScuSS YOur ScOtchkut lettering neeDS!
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.6
PDF Page: DS.p0236.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
11.7
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
tracing paper
cOmputer DraFt paperComputer paper for full size drawing: 20# white paper, perforated ornon-perforated, various standard widths x 100 yards per rolls. Availablein perforated format for IBM (1/2” center) or Gerber (slot feed) andnon-perforated format for Friction Feed or Flat Bed plotters.
DS item # Size Description14011449 36” X 50 yd 13 lb natural swallow
DS item # Size Description14020120 15” X 100 yd 20# perf. Gerber
14020121 30” X 100 yd 20# perf. Gerber
14020122 24” X 100 yd 20# perf. IBM 1/2”
14020123 30” X 100 yd 20# perf. IBM 1/2”
14020124 20” X 100 yd Non-perforated
14020125 36” X 100 yd Non-perforated4 - ½” center - iBm
4
3
21
3 - gerber - Original2 - gerber - Slot Feed1 - Friction Feed
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
Paper, Knives & Marking Accessories
DS item # Quantity
14011442 12 sheets (26” X 39”)
DS item # color
14011439 Blue
carBOFF paperA rubbing paper placed over letters or designs andrubbed with a flat hard object. Available in blue only.
carBOn paperUsed to transfer Spacerite lettering onto tracing paperand then the stencil. Available in black only.
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.7
PDF Page: DS.p0237.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
11.8
Stencil kniveS5" Stencil Knife (silver or gold iodized aluminum cylinder) with knurled grip. Include constant sharpblade. Also available in a doubled blade knife for borders.
replacement BlaDeSReplacement Constant Sharp knife blade for stencilknifes. Available in packages of 12 or individually.
Paper, Knives & Marking Accessories
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
DS item # Size
14020200 2 lb Rubber Mallet
DS item # length & Width type
14013384 1” X 2” Steel
14013385 1” X 4” Steel
item # Description
14011430 Constant sharp blade (only)
14011429 Contant sharp blade (dozen)
item # Description
14011431 5” Silver Redicut
14011424 5” Constant Sharp Gold
14011426 5” Double blade knife
DS item # color
14011456 1/8 lbs Black
Flat heaD ruBBer malletRubber mallet with
2 flat surfaces16’’ handle
Stencil rOllerS2” and 4” available.
ruBBing cakeBlack rubbing cakes for transfering images from stone to tracing paper an old favorite to the industry
ruBBer malletRubber mallet with
1 flat surfaceRound surface
DS item # Description
14013679 1-3/4 lb Rubber Mallet
autO hammerThis Auto Hammer has interchangeable hammer tips depending on your application. It is very useful to applystencil on stone.
FeaturesSize : Palm sizeOperating pressure : between 60 and 125 psiAir requirement : 2 – 4 CFMDelivers over 1 000 blows per minuteWeight : 2 lbs
item # Description
14020201 Auto Hammer (comes with Soft Plastic Tip)
14020204 Medium Plastic Tip (Black)
14020203 Super-Soft Plastic Tip (Red)
14020202 Soft Plastic Tip (Blue)
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.8
PDF Page: DS.p0238.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
prOFeSSiOnal markerSMade of durable brass material, with useful clip. Allwriter lead marks on almost any surface, no matterif it is dry or wet. Refills available. Set includes: 2Markers and 5 Refills of each color.
11.9
Paper, Knives & Marking Accessories
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
DS item # color
29916226 White
29916221 Yellow
29916222 Red
29916223 Blue
29916225 Black
DS item # color
29966003 White
29966004 Blue
29966005 Red
29966006 Yellow
29966007 Black
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
DS item # Quantity
29912565 individual
29912566 Box (144 pcs)
OmnichrOm pencilSOil chalk colored pencils non-permanent that will actually write through water onto any smooth surface. One dozen per box.
DS item # color
29912558 Red
29912559 White
29912560 Yellow
DS item # no
29916280 Marker set
29916281 Black Graphite refill
29926282 Red refill
29916283 Yellow refill
hanDY markerSHandy Marker crayons for markingon stone, rubber or other smoothsurfaces. One dozen per box.
SOapStOne craYOnSThe old standard in the stone industry. Available individually or in boxes of 144 pieces. Guarantees a consistent even line on polished stone surfaces.
china markerSTraditional China Markers for marking stone. Paperwrapped pencils with tear string for marking on drysmooth surfaces. One dozen per box.
Marker Set
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.9
PDF Page: DS.p0239.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
11.10
Monument Stencil Cutter
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
DS item # Description mFg
12013120 I-536 Monument Stencil Cutter
12013123 ADSI 60˚ Cutter Blade H20-008
12013117 ADSI 45˚ Cutter Blade
12013133 ADSI 30˚ Cutter Blade
12013127 Felt Tip H20-013
12013129 Blade Holder PL-00-02-865
25014301 APC 700 Power Back Up Pro
Fast, amazing cut qualityand small footprint
DeruSha SupplY highlY recOmmenDSthe uSe OF an apc BatterY Backup unitFOr prOtectiOn OF YOur eQuipmentanD cOmputer SYStemS. thiS SaFe-guarDS YOur eQuipment FrOm Damag-ing SurgeS anD SpikeS that canaFFect QualitY perFOrmance OF YOumachinerY.
allen Datagraph i-536 Stencil cutterThe dual drive system is an ADSI exclusive! The sprocket drives are engineered especially for processing sand-blast stencil. They assure precision tracking, registration and cutting. Switch to the friction mode to cut, draw orpounce your other media! Load the stencil size you prefer… the superb sprocket capability lets you easily adjustfor 15 inch to 30 inch material. In the friction mode, the material range is 5 inches to 36 inches! All cutting parame-ters are easily set up using a simple 2 to 3 key sequence. There’s no compromise with the 536’s full function con-trol panel. Speed and Force adjust on the fly! “Tangential Emulation” is a cutter software feature, that allows the536 to cut perfectly square corners in the heaviest of materials. V-lines and corners are sharp and accurate. The536 is compatible with the industry’s leading design and layout software programs. The 536 has the Gold Touchcutting head, 100 steps of digitally-controlled force, delivering a whopping 550 grams of force. Cut, draw orpounce, it’s not only a cutter. It’s also a pen plotter and full-size pattern maker.
Features:Includes convenient stand with stencil rollersMedia Width-A: 15” to 30”Media Width-B: 5” to 36” Maximum frame size: 36 in. x 250 ft.Media handling: Adjustable sprocket feed - Microgrit Friction Feed Media punch patterns accepted: UniformMedia types: Sandblast, Paper, Vinyl, RubylithDrive technology: Digital service
Warranty: 2 yearsCompatible with industry software
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.10
PDF Page: DS.p0240.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
11.11
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
Monument Stencil Cutter
FOr BeSt reSultS, uSe With 154-15’’ Stencil
Great for CemeteryLettering
DS item # Description
12013121 315 GTS Monument Stencil Cutter
12013123 ADSI 60˚ Cutter Blade
12013117 ADSI 45˚ Cutter Blade
12013133 ADSI 30˚ Cutter Blade
DS item # Description
12013122 315 OS Stencil Cutter
12013123 ADSI 60˚ Cutter Blade
12013117 ADSI 45˚ Cutter Blade
12013133 ADSI 30˚ Cutter Blade
allen Datagraph 315 gtS Stencil cutterAn economical alternative to larger cutter which provides excellent reliability and performance:
It assures Un-attended productivity. With 16 pins engaging the material at all times, material handling is fast, smooth and faultless. And, the 315 will process all 15” punched media regardless of punch pattern (three-hole; slotted and uniform (IBM)). No material choice restrictions… with Speeds up to 37 ips
Operation is simple, fast and anxiety free! All settings are fingertip controlled. Cut force and speed are adjustable “on-the-fly”. There are no exasperating menus and sub-menus to work through. With cutting speeds up to 37 ips and acceleration up to 4 Gs, productivity is maximized… Cut, Draw and Pounce!
The 315 GTS uses Allen’s exclusive Gold Touch cutting head providing a selectable cut force range of 10 grams to 550 grams. With the optional Pounce Kit you’ll have control over hole size and spacing… another Allen exclusive!
The 315 GTS is compatible with all leading sign making software design programs. Its on track with how you like to work… and it gets it done faster!
Features:Material width: 15’’Active cutting width: 13.25’’Media, maximum thickness: 045’’Media handling: Engineered Sprocket-TrakMedia punch patterns accepted: Three hole, slotted, uniform (IBM)Drive technology: Digital serviceCutting technology: Swivel KnifeMaterial handling: Sprocket-Feed
allen Datagraph 315 OS Stencil cutterSame features as 315 GTS but includes ultra durable case and inverter 12V to 110 for added portability
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.11
PDF Page: DS.p0241.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______
allen Datagraph Digital template cutter itech tm SerieSAllen Datagraph iTech TM Series of versatile, high-performance digital template cutter systems are equipped withADSI’s exclusive Gold Touch II cutting head, featuring an extraordinary 100 steps of digitally controlled force,adjustable from 5 grams up to 550 grams – the most versatile in the industry. Another unique feature is theindustry exclusive “long tracking guide system”, which insures accurate tracking of media up to 150 feet.Seamlessly integrated with the iTech TM Series is AllenCAD Pro V7.2. This full featured CAD software is a complete 2D computer aided design program featuring the ultimate productivity tool for countertop fabricators –Allen DirectCUT Tiling. Now, producing tiled templates is as easy as clicking a button. This user friendly onestep operation saves time and minimizes waste. No other commercially available CAD program has this uniquecapability. All iTech TM Series digital template cutting systems come with a 2-year warranty.
Features:Media, maximum thickness: less than 1 inch (2.5cm)Cutting Technology: Swivel Knife; Tangential EmulationMaterial Handling: Friction-FeedMedia Types/Processed: Vinyl, Screen Print Film, Reflective, Mask, Magnetic, Window Tint, etc.Media Width:
• 30” Cutter 2.5 to 30 inches • 36” Cutter 2.5 to 36 inches• 48” Cutter 4.5 to 48 inches• 60” Cutter 4.5 to 60 inches
template material FOr allenDatagraph Digital template cutter
11.12
FAX 1.888.876.5973 WWW.DERUSHA.COM TOLL FREE 1.800.567.2778
Template & Vinyl Cutter
SE
CT
ION
11.
DR
AF
TIN
G &
LA
YO
UT
DS item # Description
12013126 ADSI 30” Template Cutter
Call us ADSI 36” Template Cutter
Call us ADSI 48” Template Cutter
Call us ADSI 60° Cutter Blade
12013123 ADSI 60° Cutter Blade
12013117 ADSI 45° Cutter Blade
12013133 ADSI 30° Cutter Blade
DS item # Description
12013124 30” x 150’ template material
12013162 36” x 150’ template material
for more sizes, please call us.
11-Drafting & Layout_Layout 1 17-04-25 5:23 PM Page 11.12
PDF Page: DS.p0242.pdfProcess Template:PDF_proofs_HI
Date: 17-04-27Time: 09:48:38Color: YellowMagentaCyanBlack
Operator: ____________________________
PageMark-Color-Comp
❏ OK to proceed❏ Make corrections and proceed❏ Make corrections and show another proof
Signed: ___________________ Date: ______