DP DIGITAL PRECISION METROLOGY INC.

May 2013

ABOU

T DIGITAL PRECISION

WHO WE ARE….

Digital Precision is a 3rd party portable CMM (Coordinate Measuring Machine) service provider. Based out of the greater Vancouver Area of British Columbia. Every piece of equipment that Digital Precision uses will capture data digitally and provide 3D information on the target object(s). Once that data is captured it can be analyzed in various formats using GD&T, point clouds, or export to CAD.

We use the most current equipment and software out on the market today provided by leading manufacturers.

All our equipment is completely portable so wherever the job is we can get to it.

There isn’t anything out there that Digital Precision cannot measure, and measure accurately.

EQUIPMENT

Laser Tracker - Accurate to 0.0004” over 24’ - Range is 320’ from one setup

Focus 3D - Accurate to +/- 2mm over 25m- Colour Scanning capability- Capture rate: 976,000 pts/sec

CONTACT INFO

Warren Wagstaff – ConsultantBC: 778-833-3276AB: 587-889-6495

Email: warren@digitalprecision.cawww.digitalprecision.ca

APPLICATION

SSome applications:

• Installations• Reverse engineering• Alignment• Field Machining (pump base levelling/alignment, sole plate levelling, boring bar alignment)• Inspection• Interference fits• Jig/Fixture and Tooling building/verification• GD&T Inspection (Flatness, concentricity, parallelism, etc.)• Drift surveying• Volumetric Measurements (using an imager)• 3D Mapping/plant layout/as-built (using an imager)

Examples:• Motor & Gen Sets Alignment/inspection• Crane Rail Mapping• Sheave alignment• Gear box verification/alignment• Interference fits between mating parts• Track movement in real time (lift gates)

INSTALLATIO

N

Ensure precision by measuring critical machine parts and guiding their assembly and installation

REVERSE ENGIN

EERING

ALIGNM

ENT

FIELD MACHIN

ING

INSPECTIO

N

INSPECTIO

N

INSPECTIO

N

GD&T IN

SPECTION

(FLATNESS, PARALLELISM

, ETC.)

INTERFEREN

CE FITS

JIG/FIXTURE/TO

OL BU

ILDING

VOLU

METRIC M

EASUREM

ENTS

3D MAPPIN

G/PLANT LAYO

UT

These pictures are screen shots of point clouds; dimensions/coordinates can be extracted from everything in these point clouds.

3D MAPPIN

G CON

T’D

SOM

E CUSTO

MERS

• Aerospace Machining & Toolmaking• Andritz Pulp & Paper• BC Hydro• Bekaert• Eagle Copters• Endurance Wind Power• Imperial Metals• Interfor• Oceanworks• Rolls-Royce• Suncor (sub-contracted by Canadian Dewatering)• Taseko Mines• Teck