Summary
This is all the nuts, bolts and dowels (Sleeves) required for the Minifig TPHolder found here:
http://www.thingiverse.com/thing:1277045
Edit: 12 June 2017
Experience has taught me the following:
1. Use the 140 mm long sleeve I have just uploaded. 145 mm is slightlytoo long. Print this at 1.01 times the size of the .STL here
Dowel, nuts andbolts for Minifig TPHolder
VIEW IN BROWSER
updated 4. 11. 2019 | published 4. 11. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
4.3 MBupdated 3. 11. 2019
6.6 MBupdated 3. 11. 2019
1.4 MBupdated 3. 11. 2019
1.3 MBupdated 3. 11. 2019
2. Use the 45 mm long bolts and size/print them at 0.99 times the sizeof the .STL files here
3. If at all possible, use PETG or ABS for the 45 mm bolts as thy needmore strength than PLA prints I leave all the other files here in caseanyone wants to use them instead. Enjoy. All created as customisedversions of Nut Job http://www.thingiverse.com/thing:193647
Household > Bathroom
toiletpaperholder minifig lego
Category: Bathroom Print Settings
Printer: Velleman K8200
Rafts: No
Supports: No
bolt_75mm_long_24mm_dia.stl
rod_130mm_long_24mm_wide.stl
wingnut_25mm_dia.stl
nut_246mm_diameter.stl
8.1 MBupdated 3. 11. 2019
120.2 KBupdated 3. 11. 2019
2.8 MBupdated 3. 11. 2019
8.1 MBupdated 3. 11. 2019
Find source .stl files on Thingiverse.com
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
sleeve_145mm_long.stl
washer_2mm_thick_38mm_external_dia_25mm_internal_.st
bolt_45mm_long_head_30mm_wide_10mm_deep.stl
140mm_25mm_35mm_60_facets_sleeve.stl