Download - win7-64 (1)
-
8/13/2019 win7-64 (1)
1/14
Installing Synapse on Windows 7 64-Bit
This tutorial will guide you through the steps of setting up Synapse on Windows 764-Bit by
utilizing Windows XP Mode.
1. Download Required FilesWindows XP Mode:
http://download.microsoft.com/download/7/2/C/72C7BAB7-2F32-4530-878A-
292C20E1845A/WindowsXPMode_en-us.exe
VirtualPC (64-Bit):
http://download.microsoft.com/download/0/5/5/0554AE99-785F-45CB-B1F2-
0E3ED1E6117D/Windows6.1-KB958559-x64-RefreshPkg.msu
Windows Patch if you are NOT running Service Pack 1 of Windows 7:http://download.microsoft.com/download/0/A/3/0A326AC6-2F94-423F-B760-
C61CB8439182/Windows6.1-KB977206-x64.msu
2. Installing Windows XP ModeOnce the files are downloaded, launch WindowsXPMode_en-us.exe.
Follow the steps of this installer and it should install the Windows XP Mode virtual hard disk.
This virtual hard disk file is installed to C:\Program Files\Windows XP Mode by default.
http://download.microsoft.com/download/7/2/C/72C7BAB7-2F32-4530-878A-292C20E1845A/WindowsXPMode_en-us.exehttp://download.microsoft.com/download/7/2/C/72C7BAB7-2F32-4530-878A-292C20E1845A/WindowsXPMode_en-us.exehttp://download.microsoft.com/download/7/2/C/72C7BAB7-2F32-4530-878A-292C20E1845A/WindowsXPMode_en-us.exehttp://download.microsoft.com/download/0/5/5/0554AE99-785F-45CB-B1F2-0E3ED1E6117D/Windows6.1-KB958559-x64-RefreshPkg.msuhttp://download.microsoft.com/download/0/5/5/0554AE99-785F-45CB-B1F2-0E3ED1E6117D/Windows6.1-KB958559-x64-RefreshPkg.msuhttp://download.microsoft.com/download/0/5/5/0554AE99-785F-45CB-B1F2-0E3ED1E6117D/Windows6.1-KB958559-x64-RefreshPkg.msuhttp://download.microsoft.com/download/0/A/3/0A326AC6-2F94-423F-B760-C61CB8439182/Windows6.1-KB977206-x64.msuhttp://download.microsoft.com/download/0/A/3/0A326AC6-2F94-423F-B760-C61CB8439182/Windows6.1-KB977206-x64.msuhttp://download.microsoft.com/download/0/A/3/0A326AC6-2F94-423F-B760-C61CB8439182/Windows6.1-KB977206-x64.msuhttp://download.microsoft.com/download/0/A/3/0A326AC6-2F94-423F-B760-C61CB8439182/Windows6.1-KB977206-x64.msuhttp://download.microsoft.com/download/0/A/3/0A326AC6-2F94-423F-B760-C61CB8439182/Windows6.1-KB977206-x64.msuhttp://download.microsoft.com/download/0/5/5/0554AE99-785F-45CB-B1F2-0E3ED1E6117D/Windows6.1-KB958559-x64-RefreshPkg.msuhttp://download.microsoft.com/download/0/5/5/0554AE99-785F-45CB-B1F2-0E3ED1E6117D/Windows6.1-KB958559-x64-RefreshPkg.msuhttp://download.microsoft.com/download/7/2/C/72C7BAB7-2F32-4530-878A-292C20E1845A/WindowsXPMode_en-us.exehttp://download.microsoft.com/download/7/2/C/72C7BAB7-2F32-4530-878A-292C20E1845A/WindowsXPMode_en-us.exe -
8/13/2019 win7-64 (1)
2/14
3. Installing VirtualPCExecute the VirtualPC installer, 'Windows6.1-KB958559-x64-RefreshPkg.msu
(Optional) This next step is only required if you are not running Service Pack 1 of Windows 7:
Launch Windows6.1-KB977206-x64.msu (64-bit). Follow the instructions of the update. It
may ask you to reboot again after it completes.
-
8/13/2019 win7-64 (1)
3/14
4. Configure Windows XP ModeLaunch Windows XP Mode from the Start Menu under 'Windows Virtual PC'
The first time you launch Windows XP Mode it will run you through the steps of setting up.
-
8/13/2019 win7-64 (1)
4/14
Create password for 'XPMUser'
-
8/13/2019 win7-64 (1)
5/14
Configure Automatic Updates:
Select Not right now. For your Automatic Updates options and continue by clicking Next.
Press Start Setup on the next screen to start the install process. This process will take a few
minutes depending on your computer specifications so please be patient while it completes.
-
8/13/2019 win7-64 (1)
6/14
Complete the Windows XP Mode Setup:
Once the process completes, you should have a fully functional Windows XP environment
running in a window on you Windows 7 operating system.
-
8/13/2019 win7-64 (1)
7/14
5. Install Synapse WorkstationAccessing the MH External PACS website:
Launch Internet Explorer from within XP Mode.
Navigate to:https://pacs.mh.org.au
A pop-up will be displayed. Please use your Melbourne Health domain (Windows) username
and password. Please also make sure you have the domain in your username, i.e.
WHCN\[username here]
Once authenticated, you may proceed to download and install the Synapse client by clicking
on the Synapse logo Workstation Code Download
https://pacs.mh.org.au/https://pacs.mh.org.au/https://pacs.mh.org.au/https://pacs.mh.org.au/ -
8/13/2019 win7-64 (1)
8/14
Bypass Internet Explorer Security Checks:
If an Information Bar dialog screen pops up, it means that Internet Explorer has blocked the
Synapse client from running. Click 'OK' on the 'Information Bar' to unblock.
Click on the top of the Internet Explorer window just below the Address Bar that is saying
This site might require the following
Click on Install ActiveX Control
-
8/13/2019 win7-64 (1)
9/14
Installing the Synapse Workstation Client:
Another Security Warning dialog will pop up asking whether you wish to install the Synapse
software. Press Install
Another warning may pop up, please also press Install
Make a note of the difference in the names of the packages it is trying to install, make sure
you install both.
After accepting to install all the packages, please wait while the Synapse client is
downloaded and installed.
-
8/13/2019 win7-64 (1)
10/14
Installation Completed:
Once the installation process is complete you will get confirmation in the webpage advising
whether the installation was successful or not.
There should now be a 'Synapse' icon on the desktop of the Windows XP Mode.
-
8/13/2019 win7-64 (1)
11/14
Edit Synapse Properties:
Right click on Synapse on the Windows XP Mode desktop and go to Properties
In the Synapse Properties dialog, make sure Synapse is highlighted in the drop down box
Make sure the address is https://pacs.mh.org.au and 'Use encrypted communication(https) for images' are ticked.
-
8/13/2019 win7-64 (1)
12/14
Adjust Colour Depth for Windows XP Mode:
Click on the Start Button of Windows XP Mode NOTyour Windows 7 Start Button.
- Go to 'Run...'
- In the 'Run' dialog box, type in 'gpedit.msc' and press 'OK'
- The 'Group Policy' management dialog should open
Within the 'Group Policy' expand (clicking on the + icon) the Administrative Templates
folder under the Computer Configuration heading.
- Expand 'Windows Components' and then click on 'Terminal Services'
- Double click on the 'Limit maximum color depth' option on the right pane
- Another dialog will open, change the configuration to 'Enabled'
- From the drop-down box choose '24 bit' as 'Color Depth'
- Press 'OK' and close 'Group Policy' window
Restart the Windows XP Virtual Machine when this is done.
-
8/13/2019 win7-64 (1)
13/14
6. Create Synapse Shortcut Directly From Windows 7Create shortcut:
While Windows XP Mode is open, right click on the Synapse icon on the desktop and go to
Create Shortcut
A new shortcut to Synapse should be on the desktop labeled Shortcut to Synapse
Right click on this shortcut and Cut
Paste Shortcut in correct location:
Right click on the Start Menu (of Windows XP Mode)and go to Open All Users
Double click on the Programs folder
Right click and Paste the cut shortcut from earlier into this folder
You can also right click on Shortcut to Synapse shortcut and rename it to Synapse if
desired
-
8/13/2019 win7-64 (1)
14/14
Result:
Once this is done correctly a new Start Menu icon should appear on your Windows 7 Start
Menu under the Windows Virtual PC folder
From there you should be able to launch Synapse directly from Windows 7 without having to
run Windows XP Mode first.