![Page 1: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/1.jpg)
#DWwebinar
![Page 2: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/2.jpg)
#DWwebinar
q This webinar will be available afterwards at www.designworldonline.com & email
q Q&A at the end of the presentation q Hashtag for this webinar: #DWwebinar
Before We Start
![Page 3: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/3.jpg)
#DWwebinar
Meet your Speakers
MODERATOR
FEATURED SPEAKER Derek Roedel Advanced Tooling Program Manager FATHOM
Leslie Langnua Managing Editor Design World
Ryan Sybrant Director, Manufacturing Channel Enablement Stratasys
FEATURED SPEAKER
![Page 4: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/4.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
CHANGING THE WAY PRODUCTS ARE DESIGNED & MANUFACTURED
studiofathom.com // Oakland 510.281.9000 // Seattle 206.582.1062 Kemeera DBA FATHOM Proprietary and Confidential Information.
All Rights Reserved.
![Page 5: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/5.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
3D PRINTED TOOLING Overview of Capabilities
• Very short lead-times − Many molds 3D printed in less than a day
• Quick iterations during development • First article inside of a week after kickoff • Injection production-grade thermoplastics • Ideal for up to 50 parts
Overview of Limitations • Biggest limitations: texture and color • Tool action “slides and lifters” are possible—
hand loads • Thin walls and undercuts • Living hinges are debatable—
stringent on design and location of gate
![Page 6: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/6.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
DMLS TOOLING INSERTS Fits Early Prototyping and Bridge-to-Production Needs
• Build an insert in 48 hours • Post-production is minimal compared to machining • 20k+ parts (geometry and molding resin dependent) • Blend additive with traditional technologies • Material Options: − Inserts can be made from MS-1 maraging steel
(heat treated mid 50HRC for best results) − Aluminum is ideal for very quick turn short-run tooling − Can be plated/coated to address abrasion/erosion
• Inserts can be EDM textured and/or hand polished after heat treatment (replicate final product texture)
• Design inserts with features for weight savings, heat evacuation, and conformal cooling lines
![Page 7: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/7.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
COMPARISON
ITEM 3D PRINTED TOOLING CONVENTIONAL TOOLING
Mold Base MUD (Master Unit Die) MUD Or Dedicated
Mold Fitting / Build Up Hand & Machine Hand & Machine
Cooling Lines None – Done With Cold Air Water Cooling Lines
Ejection Minimal – Large Blocks Or None At All – No Sleeves Or Lifters Standard Pins – Sleeves – Lifters
Tool Action - Slides Done With Hand Loads Built Into The Tool
Resin Choices Limited To Low Melt Point – High Melt Flow Index Any Resin
Tool Material Plastic Metal
![Page 8: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/8.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
VOLUME & TIMEFRAME ITEM 3D PRINTED TOOLS 3D PRINTED
DMLS INSERTS BRIDGE TOOL /
QUICK TURN TOOLS PRODUCTION
TOOLS
Lead Time* 2-6 Days *Geometry Dependent 1-2 Weeks 3-5 Weeks 6-10 Weeks
Mold Material 3D Printed Resin MS-1 Maraging Steel, Aluminum, Or Stainless Steel Aluminum Or P20 Steel Hardened Steel
Cooling None - Air Complex Cooling Lines Simple Cooling Lines Complex Cooling Lines
Cycle Times Part-to-part 5 Minutes - 10 Minutes 10 Seconds - 2 Minutes 1 Minute - 2 Minutes 10 Seconds - 2 Minutes
Tool Life 20-100 Parts Some Rework On Later Parts (Flash) >20K ~ 20K to 100K ~ 2MM
Part Price $$$ $$ $$ $
Changes – Time & Cost
1-2 Days, CAD Time And Print A New Tool ($600 - $1,500)
1-2 Weeks Or Print Another Tool 1-2 Weeks, $1,500 - $5,000 Several Weeks And
Thousands Of Dollars
* From Time of Kickoff—DFM finalized, CMF finalized, CAD finalized, material on hand or arranged.
![Page 9: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/9.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
STEPS & TIMEFRAME
![Page 10: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/10.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
![Page 11: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/11.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
DECISION MAKING PROCESS What Tooling Is Best For My Application?
• 3D Printed Tooling (Fast) − Feature discovery such as living hinge or snaps − Real plastic part prototyping, fastest iteration (new tool) − Material performance for available resins (regulatory or drop test)
• DMLS Insert Tooling − Part performance testing − Material performance for any resin (regulatory or drop test) − SPC data collection: gating/ejection, venting, cycle-time
• Bridge Tooling − Closest to production for short-run applications − Production resin choices − SPC data collection: gating/ejection, venting, cycle-time
![Page 12: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/12.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
WHEN TO USE 3DP IM When Prototype In Final Material Is Needed For Design Decision
• Durometer of a TPE—Is it 30 or 90 Shore A? • Impact testing • A crucial snap • Fluid / air flow • A flexure • Sonic weld testing, or adhesive bonding
When You Need 50 Parts For Functional Testing With Clients • Fastest / cheapest way to 50 parts of production material • Regulatory test units
Fast Part Design Iteration • If parts don’t work as anticipated, we can adjust CAD in the afternoon,
3D print new tool parts overnight, and mold new parts the next day
![Page 13: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/13.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
MATERIAL OPTIONS FATHOM Stocks Several Materials
• Polypropylene (PP), Polyethylene (PE), Thermoplastic Elastomer (TPE) Shore A 60, ABS, ABS/PC, Nylon (PA – Polyamide)
Always Consider Lead-time In Selecting Your Materials • Some materials can take months to get, especially in small
quantities • Just because it is listed on a website, doesn’t mean that small
quantity orders are available Lower melt points are better
• Heat degrades the tool Higher Melt Flows Are Better
• Thinner when molten
![Page 14: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/14.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
IDEAL SITUATION Part Was Designed For Injection Molding From The Beginning
• Drafted to 2-3+ degrees • Parting line defined • Gate was considered • Consistent wall thickness • Tool action is defined (slides, no lifters, etc.) • No thin standing steel (think in the inverse of part design)
Open And Shut Tool Design • Minimum amount of tool action (hand loads)
Simple Resins Minimal Part Finish Requirements Natural Colored Resin
![Page 15: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/15.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
FATHOM’S BEST PRACTICES Well Designed Parts Get Made Much Faster
• New ideas are great, but new methods of manufacturing take longer to see the light of day—FATHOM can help, but invention on a timeline is a dangerous game
Decide On What It Is That This Model Needs To Answer • What are the objectives of the build?
Do Design Reviews Early and Often • Like voting in Chicago • Don’t hesitate to give FATHOM a call to review your design
Design With The End In Mind • If you are going to injection molding in the end, start your design that way • Don’t fall in love with a bad design
Think Of How The Tool Will Be Built To Make The Part • Where will the gates be? And the knit lines? • Where are parting lines? And the draft? • How will tool action be implemented?
− If you have a hole in the side of your part, consider the size of the hand load to make it
![Page 16: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/16.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
FUTURE OF 3DPT New & Better Mold Materials • Better finishes • Longer part runs • Higher mold pressures
Shorter Lead-times Influence Future Machine Design
![Page 17: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/17.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
![Page 18: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/18.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
EXAMPLE Phone Case (PolyJet)
• 3D printed tool in 7 hours and molded parts within 24 hours
• Tool Material: ABS-Like (PolyJet) • Part Material: TPE Shore 60A − Grade offers soft/tactile feel, adhesion
to Polypropylene, good weatherability • Up to 50 Parts • Dimensions: − A-Side: 4.75” x 4.75” x 1.5” − B-Side: 4.75” x 4.75” x 1”
• Shot Size: 27cm³
![Page 19: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/19.jpg)
Kemeera DBA FATHOM Proprietary and Confidential Information. All Rights Reserved. #DWwebinar
EXAMPLE Infrared Transmitting (DMLS)
• Inserts printed with MS-1 Steel in 2 days • CNC machine surfacing and polish in 1 day • Tool Material: MS-1 Steel − SPC data collection for production specification
• Part Material: Acrylite IR specific resin − Grade offers infrared transmitting capabilities
• Up to 50k Parts (heat treated insert) • Dimensions: − Insert: 3” x 4” − Shot size: 2cm³
![Page 20: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/20.jpg)
#DWwebinar
CONTACT INFORMATION
OAKLAND OFFICE (510) 281-9000
329 Jefferson Street Oakland, CA 94607
OAKLAND PRODUCTION CENTER
315 Jefferson Street Oakland, CA 94607
www.studiofathom.com [email protected]
SEATTLE OFFICE + PRODUCTION CENTER
(206) 582-1062 4302 Stone Way North
Seattle, WA 98103
![Page 21: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/21.jpg)
21 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY #DWwebinar
Efficiency and Productivity with 3D Printed Manufacturing Aids
March 24th, 2016
![Page 22: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/22.jpg)
#DWwebinar
Transforming the Manufacturing Floor
![Page 23: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/23.jpg)
#DWwebinar
Jigs, Fixtures and Tools Streamline production floor workflows
A means to optimize manufacturing by reducing cost and cycle time, while increasing product quality and repeatability
![Page 24: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/24.jpg)
#DWwebinar
Jigs, Fixtures and Tools Most important considerations
• Accuracy
• Rigidity
• Ease of Use
• Economy in production
• Workforce safety
![Page 25: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/25.jpg)
#DWwebinar
Jigs, Fixtures and Tools Objective
• Ensure interchangeability and accuracy of parts manufactured,
• Minimize the possibility of human error
• Permit the use of medium skilled labor
• Reduce the manufacturing time
• Allow production of repeat orders without retooling
![Page 26: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/26.jpg)
#DWwebinar
Moving up the Value Chain
![Page 27: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/27.jpg)
#DWwebinar
Moving up the Value Chain
Prototyping Func.onalTes.ng
JigsandFixtures Tooling Produc.on
Parts
Product Development • Prototype • Review • Refine
Application Verification • Performance testing • Integration validation • Acceptance testing
Process Facilitators • Molds • Patterns • Mandrels
Efficiency Tools • Work holders • Gauges • Guides
Final Components • Covers • Brackets • Ducts
![Page 28: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/28.jpg)
#DWwebinar
Challenges & Opportunities
![Page 29: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/29.jpg)
#DWwebinar 29 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
Today’s Challenges
• Long machine set-ups • Variation during assembly and fitting • Complicated part holding requirements • Ease of handling and transportation • Defects caught too far down production line • Employee safety and ergonomics • Cost, time, wait and storage prevents manufacturers from
producing needed efficiency tools
![Page 30: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/30.jpg)
#DWwebinar
Addressing Today’s Challenges
• Complex geometries no longer a barrier
• Design flexibility
• Shorten set-up times
• Part consolidation
• Integrated features
• Ergonomics
• Simple duplication
![Page 31: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/31.jpg)
#DWwebinar
Justification for AM
Key Success Factors • Efficient; path of least resistance • Allows for more on the floor • Translates to operational savings • Reduced burdened rate • Change in design and manufacturing mindset • Will impact multiple departments
![Page 32: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/32.jpg)
#DWwebinar
Customer Success Stories
![Page 33: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/33.jpg)
#DWwebinar
Triumph Composite Systems
Why Triumph adopted Additive Manufacturing: To lower tooling component costs, decrease schedule (lead-time) and reduce dependence on external tool suppliers
![Page 34: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/34.jpg)
#DWwebinar
Creating worker friendly factories • Focus on ergonomics • Light-weighting tools • Increasing tools performance • Customizing tools to the assembler • Reduced automobile rework
BMW
![Page 35: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/35.jpg)
#DWwebinar
Rethinking traditional processes • Transforming test fixtures • Reduced part count • Reduce cost and lead-time • User friendly
Wair Products
![Page 36: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/36.jpg)
#DWwebinar
Opel
Changing the Approach to Process Tooling • Brings the line worker into the design process • Allows them to adapt tools much better to the
worker and automobile • Makes it possible to find and implement the most
appropriate solution
![Page 37: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/37.jpg)
#DWwebinar
Genesis Systems Group
Investment in Innovation • Optimized robotic end-of-arm tooling • Reduced part count • Reduce cost and lead-time
![Page 38: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/38.jpg)
#DWwebinar
Solaxis
Reducing tool footprint and weight while increasing accuracy • Removed 100lbs from previous tool • Agility increased flexibility of design • Solved compliance issues for supplier
![Page 39: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/39.jpg)
#DWwebinar
Taking the First Steps
![Page 40: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/40.jpg)
#DWwebinar
Successful Implementation
• Connect cross-functional teams to seek out opportunities where 3D printed tools can make an impact
• Interview the workforce that is involved in day to day production
• Don’t forget about operational efficiency programs such as 5S
• Focus on one area or department and duplicate success to others
![Page 41: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/41.jpg)
#DWwebinar
Re-Engineer your Vision
![Page 42: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/42.jpg)
#DWwebinar
Initiate for results
Reduce Production Time and Cost
Maximize Efficiency
Maintain Consistent Quality
Improve Functionality
Enhance Safety
![Page 43: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/43.jpg)
#DWwebinar
Thank You
Ryan Sybrant Director, Manufacturing
![Page 44: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/44.jpg)
#DWwebinar
Questions?
MODERATOR
Leslie Langnua Managing Editor Design World
Ryan Sybrant Director, Manufacturing Channel Enablement Stratasys
FEATURED SPEAKER
FEATURED SPEAKER Derek Roedel Advanced Tooling Program Manager FATHOM
![Page 45: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/45.jpg)
#DWwebinar
q This webinar will be available at designworldonline.com & email
q Tweet with hashtag #DWwebinar
q Connect with Design World
q Discuss this on EngineeringExchange.com
Don’t Forget!
![Page 46: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/46.jpg)
#DWwebinar
![Page 47: Why should you make tooling with 3D printing?](https://reader031.vdocuments.us/reader031/viewer/2022030312/58ee24211a28aba1718b4591/html5/thumbnails/47.jpg)
#DWwebinar
THIS DOCUMENT IS PROPRIETARY TO STRATASYS, INC. AND/OR STRATASYS LTD., AND SHALL NOT BE REPRODUCED OR DISCLOSED IN WHOLE OR IN PART OR USED FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT WRITTEN AUTHORIZATION BY STRATASYS, INC. AND/OR STRATASYS LTD. STRATASYS, INC MAKES NO CLAIM, PROMISE, OR GUARENTEE OF ANY KIND ABOUT THE ACCURACY, COMPLETENESS, OR ADEQUACY OF THE CONTENT OF THIS PRESENTATION AND EXPRESSLY DISCLAIMS LIABILITY FOR ERRORS AND OMISSIONS IN SUCH CONTENT.