Download - Westernex Drilling Supplies
[email protected] Page 11 Drilling Supplies
Westernex is a leading supplier to the Mining & Exploration Industry both in Australia and globally with an extensive range of consumables, equipment, tools and support products.
Drilling SuppliesDrilling SuppliesDrilling Supplies
CatalogueCatalogueCatalogue
Westernex Pty Ltd operates a quality management system which is certified by ISO 9001:2008
for the following scope; Procurement, Warehousing and Distribution of consumables, support
equipment, products and accessories and tools for the Exploration & Mining Industry.
[email protected] Page 22 Drilling Supplies
Collar Cutter Drilling Supplies
Diamond Blades to suite Petrol Collar Cutters
SKU Colour Size
COLLARCUTBLADE2 2"
COLLARBLADE3" 3"
COLLARCUTBLADE4 4"
Collar Cutter Blade
Collar Cutter - Bent Shaft
SKU Colour Size
1903-00102 Bent Shaft
Collar Cutter Petrol Makita
Petrol Collar Cutters - Straight Shaft This Collar Cutter is available with or without the Blade Guard
SKU Colour Size
1903-01000 Straight Shaft
1903-01001 Straight Shaft with Blade Guard
Collar Cutter Petrol Stihl
2 Stroke Petrol collar Cutters are available in either Bent or Straight shaft s. Straight Shaft units available with or without a Shroud. Please note that the Bent Shaft version does not have a Shroud.
[email protected] Page 33 Drilling Supplies
The PVC Casing Cutters have been designed and manufactured for the mining and drilling industries. They are manually operated and used for cutting PVC bore casings from the inside with casing wall thicknesses of up to 9mm and up to 1500mm below the top level of the casing. Typically the PVC Casing Cutters are used in the rehabilitation of drilling sites where casings are protruding above the ground and need to be cut below ground level and plugged. Two types of PVC Casing Cutters are available, one with twin cutting wheels (TWC) and the other with a single cutting wheel (SCW) and opposing rollers. The PVC Casing Cutters are supplied with a depth stop plus handle guide and carry case. They are held in stock.
SKU Colour Size
COLLARCUTTER RAB Size: 100-125
COLLARCUTTER-RC RC Size: 125-150-175
PVC Casing Cutter
Collar Cutter Drilling Supplies
Select either a 6mm or 8mm PVC Cutting Wheel
SKU Colour Size
PVCCOLARCUTT6MM 6mm
PVCCOLARCUTT8MMB 8mm
PVC Casing Cutter Blade
[email protected] Page 44 Drilling Supplies
Hole Plugs Drilling Supplies
Colour Coded, Non Lock Stacking, Light Weight with Hand Grip.
SKU Colour Size
1136-00300 Red Top: 60mm x Base: 195mm x 400mmH
1136-00301 Orange Top: 75mm x Base: 190mm x 410mmH
1136-00302 Yellow Top: 160mm x Base: 330mm x 800mmH
1136-00303 Black Top: 200mm x Base: 450mm x 800mmH
1136-00304 Pink Top: 250mm x Base: 480mm x 800mmH
Blast Hole Saver
Retention Springs are designed to plug core and explosive holes in the mining and exploration industry
SKU Colour Size
B63-kel A:25mm x B:34.5mm x C: 90mm x D: 54mm
B34-kel A:32mm x B:42.5mm x C: 90mm x D: 58mm
B64-kel A:45mm x B:54.5mm x C: 105mm x D: 62mm
B87-kel A:50mm x B:60mm x C: 110mm x D: 58mm
B35-kel A:72mm x B:88mm x C: 150mm x D: 68mm
Bore Hole Plugs
Westernex manufacturers their own Concrete Hole Plugs, these are available ex Stock for RAB or RC Holes. WC2-120mm Top x 55mm Base x 160mm Height WC4-180mm Top x 90mm Base x 160mm Height
SKU Colour Size
1136-00001 RAB - PVC,Wire,Ally Tag,Perma Tag
1136-00002 RAB - Wire,Ally Tag,Perma Tag
1136-00003 RC - PVC,Wire,Ally Tag,Perma Tag
1136-00004 RC - Wire,Ally Tag,Perma Tag
Concrete Hole Plug
Westernex can cut any size Foam Block required to fill your Drill Hole, this is our Standard Size which fits most jobs
SKU Colour Size
FOAMBLOCK150X140 150mm x 150mm x 140mm
Foam Block
Octoplugs have been used for decades to seal your drill hole, made of UV Stabilised material they will last.
SKU Colour Size
OSHP Upto 250mm Diameter
Octoplug
[email protected] Page 55 Drilling Supplies
Hole Plugs Drilling Supplies
There are a number of various RC & RAB Hole Plugs on the Market today, we stock them all!!
SKU Colour Size
1136-00051 Black RAB Plug
HOLEPLUGRAB Black RC Plug
1136-00050 Black RC Plug Lid
HOLEPLUGRC Orange RC Plug
HOLEPLUGRCLID Orange RC Plug Lid
Plastic Hole Plug
DWV Solvent Cement Joint Cap
SKU Colour Size
PVC50MMENDCAP 50mm NB
1905-00018 65mm NB
1904-00013 80mm NB
1904-00016 100mm NB
1904-00012 150mm NB
1904-00017 225mm NB
1904-00020 300mm NB
PVC End Cap - DWV
SC series sleeve caps are a parallel moulded cap to protect the outside diameter of tubing, shafts, threaded and non-threaded rod. They make excellent masks for painting or sand blasting etc. Available in over 53 sizes up to 280mm diameter.
SKU Colour Size
SC0603 60.3mm - 2 3/8" ID
SC1016 101.6mm - 4" ID
SC1143 114.3mm - 4 1/2" ID
SC1270 127.0mm - 5" ID
SC1397 139.7mm - 5 1/2" ID
SC1524 152.4mm - 6" ID
SC1651 165.1mm - 6 1/2" ID
SC1682 1682mm - 6 5/8" ID
Sleeve Cap
[email protected] Page 66 Drilling Supplies
SKU Colour Size
1506-02025 15kg
Muds Drilling Supplies
AUS-BEN XTRA is a premium grade Wyoming sodium bentonite which meets or surpasses the API 13A test specifications for drilling grade bentonite.
SKU Colour Size
1506-02002 25kg
Aus-Ben Xtra
AUS-DET XTRA is a concentrated blend of non-ionic surface wetting agents (surfactants), specially formulated to improve the drilling characteristics of low solids water based muds.
SKU Colour Size
1506-02008 25 Litre
Aus-Det Xtra
AUS-GEL is a modified high quality grade sodium Bentonite formulated to ensure ease of mixing with superior mud making qualities in fresh water.
SKU Colour Size
1506-02012 25kg
Aus-Gel
AUS-GEL XTRA® is a modified premium grade Wyoming sodium Bentonite formulated to ensure ease of mixing with superior mud making qualities in fresh water.
SKU Colour Size
1506-02013 25kg
Aus-Gel Xtra
AUS-GRIP (ECO) A & B is a dual component, low density rigid foaming system specifically designed for plugging applications.
SKU Colour Size
1506-02014 Part A 0.87kg
1506-02015 Part B 1.13kg
Aus-Grip 2 Part
AUS-PLUG is a hydrophilic polymer in granular form that absorbs up to 500 times its original volume in water. AUS-PLUG is ideal for sealing zones of lost circulation and can also be used to reduce rod vibration in holes where lost returns are a problem.
SKU Colour Size
1506-02023 8kg
Aus-Plug
AUS-TROL® is white granular organic polymer that forms a clear, colloidal solution in fresh or salty water.
Aus-Trol
[email protected] Page 77 Drilling Supplies
Muds Drilling Supplies
BACKFILL B3 is a mixture of premium bentonite, gypsum and sodium sulphate.
SKU Colour Size
1506-02027 25kg
Backfill
BARITE or Bartyes is a high quality barium sulphate (BaSO4) micronized to meet API 13A specifica-tions used to increase mud density in all types of drilling fluid systems, oil or water based.
SKU Colour Size
1506-02028 25kg
Baryte / Barite
BENTONITE CHIPS are pure Wyoming bentonite designed for use as sealants for hole abandon-ment, casing seals or any vertical seal to prevent water movement up or down a bore hole.
SKU Colour Size
1506-02030 3/8”- ¾” x 50 LB
Bentonite Chips Coarse
BENTONITE CHIPS are pure Wyoming bentonite designed for use as sealants for hole abandon-ment, casing seals or any vertical seal to prevent water movement up or down a bore hole.
SKU Colour Size
1506-02031 1/4”- 3/8’’ x 50LB
Bentonite Chips Medium
BENTONITE PELLETS R30 are a highly compressed pellet made from premium sodium bentonite. BENTONITE PELLETS R30 will swell approximately 10 – 15 times their dry state when hydrated in fresh water.
SKU Colour Size
1506-02035 50 LB
Bentonite Pellets R30
BIOCIDE G is a biodegradable and environmentally friendly quick acting concentrated biocide used to control bacterial activity as a preventative or for system treatment in water-based drilling fluids such as drilling fluids, injection water systems, packer fluids, completion and work fluids.
SKU Colour Size
1506-02036 25 Litre
Biocide G
AMC BIODEGRADABLE HAMMER OIL is a vegetable oil based hammer lubricant supplied in three grades, 150, 320 and 460 centipoises.
SKU Colour Size
1506-02043 Grade 320 - 25 Litre
1506-02044 Grade 460 - 25 Litre
Biodegradable Hammer Oil
[email protected] Page 88 Drilling Supplies
SKU Colour Size
1506-02069 25 Litre
Muds Drilling Supplies
BIO-VIS is a high viscosity natural polymer specifically formulated for mixing a low solids biode-gradable drilling fluid for use in waterwells. BIO-VIS is a non-toxic free flowing powder that is completely biodegradable.
SKU Colour Size
1506-02045 15kg
Bio-Vis
BIO-VIS XTRA is a premium grade, high viscosity, modified natural polymer specifically formulated for mixing a low solids biodegradable drilling fluid for use in waterwells.
SKU Colour Size
1506-02047 15kg
Bio-Vis Xtra
CALCIUM CHLORIDE can be used to prepare a solids free drilling fluid with a density to 11.7 pounds per gallon (SG 1.40) maximum.
SKU Colour Size
1506-02049 25kg
Calcium Chloride
CEMENT FONDU is a specialized cement often used within a variety of different drilling methods and applications.
SKU Colour Size
1506-02051 25kg
Cement Fondu
CR-650® is a high molecular weight, powdered polymer which has been developed to improve core recovery, particularly in broken and sandy formations.
SKU Colour Size
1506-02060 15kg
1506-02061 15kg
CR-650
AMC DEFOAMER (S) is a silicone based all purpose defoamer and anti-foamer for use in water based drilling fluids. It is designed to reduce surface tension and break foam bubbles over a wide variety of conditions.
SKU Colour Size
1506-02063 25 Litre
Defoamer
EP BIT LUBE is vegetable based soluble oil which was developed specifically for the diamond drilling industry. Its extreme pressure lubrication properties were designed for the operating parameters at the face of an impregnated diamond bit giving improved penetration rates and extended bit life.
EP Bit Lube
[email protected] Page 99 Drilling Supplies
Muds Drilling Supplies
EZEE-PAC R® is a new generation highly dispersive high quality polyanionic cellulose polymer used for viscosity and water loss control in most water based drilling fluid systems.
SKU Colour Size
1506-02072 15kg
Ezee Pac R
EZEE-TROL® is a new generation highly dispersive versatile blend of cellulosic and organic poly-mers which forms a high viscosity fluid that exhibits good hole stabilising characteristics in all types of drilling applications.
SKU Colour Size
1506-02073 15kg
Ezee Trol 12 x 1kg
FR100L is a liquid super plasticiser (Friction Reducing Compound) in concentrated form which allows high density cement slurries to be more pumpable without significantly compromising setting times or strength.
SKU Colour Size
1506-02074 25 Litre
FR-100L
GROUND STABILISER is a specially formulated blend of resins that coats out on the hole wall to form a hard surface. It is designed for use in RC drilling operations where broken/unstable ground is problematic.
SKU Colour Size
1506-02080 25 Litre
Ground-Stabiliser
GYP-SET is a low strength gypsum based cement to provide the user with a grout having a prede-termined set time.
SKU Colour Size
1506-02082 20kg
Gyp-Set 15 20Kg
AMC HAMMER OIL is a specially formulated mineral-oil based heavy duty hammer lubricant supplied in three ISO grades, 150, 320 and 460 centipoises with or without Molylube additive Molybdenum disulfide.
SKU Colour Size
1506-02090 Grade 320 - 25 Litre
1506-02093 Grade 460 - 25 Litre
Hammer Oil
HARD-SET is a specially formulated fast setting, high strength cement.
SKU Colour Size
1506-02095 15kg
Hard-Set
[email protected] Page 1010 Drilling Supplies
Muds Drilling Supplies
INHIBI-SWELL P is a uniquely formulated, one sack system for drilling of difficult geological for-mations.
SKU Colour Size
1506-02101 20kg
Inhibi-Swell (P)
LIQUID ROD GREASE (LRG) has the ability to adhere to the formation and the steel rods to dra-matically improve lubrication, reduce rotational pressure and torque. LRG is non-toxic, environ-mental acceptable and easy to apply.
SKU Colour Size
1506-02109 25 Litre
Liquid Rod Grease
LIQUI-POL is a liquid anionic polymer viscosifier with high molecular weight providing rapid viscosity without the problems associated with mixing, as is the case with most powdered poly-mers.
SKU Colour Size
1506-02113 25 Litre
Liqui-Pol
LIQUI-SPERSE is a polymeric thinner designed to effectively deflocculate bentonite muds.
SKU Colour Size
1506-02115 25kg
Liqui-Sperse
The density or weight of a give volume of liquid is determined by using a mud balance.
SKU Colour Size
1506-02117
Mud Balance
AMC PAC L is a polyanionic cellulose polymer, which is an extremely effective filtrate reducer in fresh or salty water.
SKU Colour Size
1506-02118 15kg
1506-02119 25kg
Pac L
[email protected] Page 1111 Drilling Supplies
SKU Colour Size
1506-02138 25kg
Muds Drilling Supplies
AMC PAC R is a high molecular weight purified polyanionic cellulose polymer that is an extremely effective viscosifier with minor filtration control and clay encapsulator properties in fresh, hard and saline waters.
SKU Colour Size
1506-02120 15kg
1506-02121 25kg
Pac R
PENETROL XTRA is vegetable based soluble oil that has been developed as a surface-acting rate-of-penetration (ROP) enhancer and it is designed for use in water-based drilling fluid systems.
SKU Colour Size
1506-02125 25 Litre
Penetrol Xtra
POTASSIUM CHLORIDE (KCL) is a soluble salt that is an extremely efficient shale stabilizer when drilling hydro sensitive clays and shales.
SKU Colour Size
1506-02128 25kg
Potassium Chloride (Tech)
ROD GREASE XTRA TACKY is a specially formulated tenacious barium-based grease recommended for use on diamond drill rods to reduce vibration and friction between the rod and casing or rock strata.
SKU Colour Size
1506-02132 17kg
Rod Grease Xtra Tacky
SHUR SEAL is a blend of variable sized particles of ground paper that is applicable for use in all water based drilling fluid systems.
SKU Colour Size
1506-02135 10kg
Shur-Seal
SODA ASH is a free flowing, white, hygroscopic, granular form of sodium carbonate, which is used to treat out calcium hardness and/or to raise pH.
SKU Colour Size
1506-02136 25kg
Soda Ash
SODIUM BICARBONATE is a white free flowing powder.
SKU Colour Size
1506-02137 25kg
Sodium Bicarbonate
SODIUM CHLORIDE can be used as a weighting agent to increase fluid density to 10.0 pounds per gallon (SG 1.20) maximum.
Sodium Chloride
[email protected] Page 1212 Drilling Supplies
Muds Drilling Supplies
SUPER FOAM is a biodegradable mixture of anionic surfactants which has been formulated for use in the mineral and water well drilling industries.
SKU Colour Size
1506-02142 25 Litre
Super-Foam 25Ltr
SUPERLUBE is truly a unique product. It is a new generation high performance extreme pressure lubricant / cutting oil made specifically for the mineral exploration industry.
SKU Colour Size
1506-02145 25 Litre
Super-Lube 25Ltr
AMC UNIVERSAL is vegetable oil-based cutting oil for diamond drilling, which is suitable in all types of make up water for both surface and underground application.
SKU Colour Size
1506-02159 25 Litre
Universal
Viscosity is a measurement relating to the flow properties of fluids. The funnel viscosity test can indicate changes in fluid properties, with measurements taken and recorded regularly.
SKU Colour Size
1506-02160 Marsh Cup
1506-02161 Marsh Funnel
Viscosity Cup and Funnel
VIS-GEL is a blend of sodium bentonite and co-polymers, finely ground and processed to ensure ease of mixing, superior plastering qualities and high gel strengths when horizontal boring.
SKU Colour Size
1506-02162 20kg
Vis-Gel
WATER CONDITIONER is a blend of water treating agents. It is used for the treatment of recycled mine water or extremely hard water.
SKU Colour Size
1506-02163 15kg
Water Conditioner
WELLCLEAN is used in the development and clean up of water wells where bentonite based mud has been used.
SKU Colour Size
1506-02164 15kg
Wellclean
XAN-BORE is a premium quality biopolymer powder designed to provide maximum solids suspen-sion and hole cleaning in vertical and highly deviated wells as well as horizontal directional drilling applications.
SKU Colour Size
1506-02166 5kg
1506-02165 25kg
Xan-Bore
[email protected] Page 1313 Drilling Supplies
Poly Pipe Drilling Supplies
MEDIUM DENSITY PE OR PE80B has been mostly superceeded by PE100 but it is still available in some sizes and diameters used for gas reticulation.
SKU Colour Size
1902-00114 20mm PN 12.5
1902-00105 20mm PN 12.5
1902-00113 25mm PN 12.5
1901-60051 25mm PN 12.5
1902-00115 32mm PN 12.5
1902-00102 40mm PN 12.5
1901-60029 50mm PN 12.5
1902-00103 63mm PN 10
1902-00117 63mm PN 16
1902-00107 100mm PN 10
Poly Pipe
Plasson Ltd provides a comprehensive polyethylene pipe joining system for sizes 16 to 500 mm. Mechanical and electrofusion (heat welded) fittings and equipment systems are available.
SKU Colour Size
1901-60023 25mm
1901-60024 32mm
1901-60025 40mm
1901-60026 50mm
1901-60027 63mm
1901-60028 110mm
Poly Pipe Coupling
Plasson Ltd provides a comprehensive polyethylene pipe joining system for sizes 16 to 500 mm. Mechanical and electrofusion (heat welded) fittings and equipment systems are available.
SKU Colour Size
1901-60017 25mm
1901-60018 32mm
1901-60019 40mm
1901-60020 50mm
1901-60021 63mm
1901-60022 110mm
Poly Pipe Elbow
Plasson Ltd provides a comprehensive polyethylene pipe joining system for sizes 16 to 500 mm. Mechanical and electrofusion (heat welded) fittings and equipment systems are available.
SKU Colour Size
1901-60011 25mm
1901-60012 32mm
1901-60013 40mm
1901-60014 50mm
1901-60015 63mm
1901-60016 110mm
Poly Pipe Tee
Butt fusion technology is the safe, reliable and favorable jointing for a wide dimension range. GF Piping Systems offers mechanical, hydraulic and CNC-guided fusion machines for on site constructions and the workshop. The fusion areas of the pipes and fittings are heated to fusion temperature and joined by means of mechanical pressure, without using additional materials. A homogeneous joint results. Portable butt fusion machine for use in the workshop and on job sites. For fusion jointing of PP and PE pipes and fittings as well as prefabrication of segments in the size range d 20 - 110 mm and up to SDR 11. Machine MC 110 complete includes: machine mounting, base machine, 2 base clamping plates (wide), base clamping plate (left narrow), electrically operated planer, electronic controlled heater, table clamp and transport box. Including transport packaging, without accessories
Westernex have Butt Weld Poly Welders!!
[email protected] Page 1414 Drilling Supplies
PVC Pipe Drilling Supplies
Rapid Weld PVC Priming Fluid cleans and primes PVC pipes, fittings and sheeting before the application of Rapid Weld PVC pipe cement.
SKU Colour Size
PVC-PRIMER 500ml
PVC Cement Primer
A fast setting, high bond strength PVC pipe cement
SKU Colour Size
PVC CEMENT TYP N 500ml
PVC Cement Type N - Blue
Rapid Weld PVC Pipe Cement Type P is high bond strength PVC pipe cement designed for installa-tion of pipes and fittings subject to high pressure.
SKU Colour Size
PVCGLUE 500ml
PVC Cement Type P - Green
We can offer all types of Pipe from Solvent Weld to Rubber Ring Joint Pressure Pipe, DWV Pipe.
SKU Colour Size
1905-10101 6 meter x 20mm Class 12
1905-10102 6 meter x 20mm Class 18
1905-10134 6 meter x 225mm Class 12
1905-10135 6 meter x 250mm Class 12
1905-10104 6 meter x 25mm Class 12
1905-10105 6 meter x 25mm Class 18
1905-10103 6 meter x 25mm Class 9
1905-10136 6 meter x 300mm Class 12
1905-10107 6 meter x 32mm Class 12
1905-10108 6 meter x 32mm Class 18
1905-10106 6 meter x 32mm Class 9
1905-10111 6 meter x 40mm Class 12
1905-10112 6 meter x 40mm Class 18
1905-10109 6 meter x 40mm Class 6
1905-10110 6 meter x 40mm Class 9
1905-10115 6 meter x 50mm Class 12
1905-10116 6 meter x 50mm Class 18
1905-10113 6 meter x 50mm Class 6
1905-10114 6 meter x 50mm Class 9
1905-10120 6 meter x 80mm Class 12
1905-10118 6 meter x 80mm Class 6
1905-10119 6 meter x 80mm Class 9
1905-10124 6 meter x 100mm Class 12
1905-10122 6 meter x 100mm Class 6
1905-10123 6 meter x 100mm Class 9
1905-10127 6 meter x 125mm Class 12
1905-10126 6 meter x 125mm Class 9
1905-10130 6 meter x 150mm Class 12
1905-10128 6 meter x 150mm Class 6
1905-10129 6 meter x 150mm Class 9
1905-10100 6 meter x 15mm Class 18
1905-10133 6 meter x 200mm Class 12
1905-10131 6 meter x 200mm Class 6
1905-10132 6 meter x 200mm Class 9
PVC Pressure Pipe
[email protected] Page 1515 Drilling Supplies
Wrenches Drilling Supplies
Straight Pipe Wrenches have a sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws. Heavy-duty pipe wrenches comply with federal specifications GGG-W65IE, Type II, Class A.
SKU Colour Size
1209-04000 18 Inch - 450mm
1209-04001 24 Inch - 600mm
1209-04002 36 Inch - 900mm
1209-04003 48 Inch - 1200mm
1209-04004 60 Inch - 1500mm
H/Duty Straight Pipe Wrench
Straight Pipe Wrenches have a sturdy, aluminium housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws. Heavy-duty pipe wrenches comply with federal specifications GGG-W65IE, Type II, Class A.
SKU Colour Size
1209-04005 18 Inch - 450mm
1209-04006 24 Inch - 600mm
1209-04007 36 Inch - 900mm
1209-04008 48 Inch - 1200mm
Aluminium Straight Pipe Wrench
Relaceable Parts to suit your Ridgid Wrench Heavy-duty pipe wrenches comply with federal specifications GGG-W65IE, Type II, Class A.
SKU Colour Size
1209-04009 18 Inch - 450mm
1209-04010 24 Inch - 600mm
1209-04011 36 Inch - 900mm
1209-04012 48 Inch - 1200mm
1209-04013 60 Inch - 1500mm
Hook Jaw
Relaceable Parts to suit your Ridgid Wrench Heavy-duty pipe wrenches comply with federal specifications GGG-W65IE, Type II, Class A.
SKU Colour Size
1209-04014 18 Inch - 450mm
1209-04015 24 Inch - 600mm
1209-04016 36 Inch - 900mm
1209-04017 48 Inch - 1200mm
1209-04018 60 Inch - 1500mm
Heel Jaw and Pin Assy
Relaceable Parts to suit your Ridgid Wrench Heavy-duty pipe wrenches comply with federal specifications GGG-W65IE, Type II, Class A.
SKU Colour Size
1209-04019 18 Inch - 450mm
1209-04020 24 Inch - 600mm
1209-04021 36 Inch - 900mm
1209-04022 48 Inch - 1200mm
1209-04023 60 Inch - 1500mm
Heel Jaw Pin
Relaceable Parts to suit your Ridgid Wrench Heavy-duty pipe wrenches comply with federal specifications GGG-W65IE, Type II, Class A.
SKU Colour Size
1209-04024 18 Inch - 450mm
1209-04025 24 Inch - 600mm
1209-04026 36 Inch - 900mm
1209-04027 48 Inch - 1200mm
1209-04028 60 Inch - 1500mm
Coil & Flat Spring
[email protected] Page 1616 Drilling Supplies
Wrenches Drilling Supplies
Relaceable Parts to suit your Ridgid Wrench Heavy-duty pipe wrenches comply with federal specifications GGG-W65IE, Type II, Class A.
SKU Colour Size
1209-04029 18 Inch - 450mm
Nut
[email protected] Page 1717 Drilling Supplies
www.westernex.com.au
AUSTRALIA
Perth Head Office
66 Truganina Road
Malaga, 6090
Western Australia
P: +61 (0) 8 9209 8500
F: +61 (0) 8 9209 2426
Kalgoorlie
5 Williams Street
West Kalgoorlie, 6430
Western Australia
P: +61 (0) 8 9091 1152
F: +61 (0) 8 9091 1936
Queensland
14 Hasp Street Seventeen Mile Rocks, QLD 4073 Telephone: +61 (0) 7 3376 2422 Fax: +61 (0) 8 9209 2467 Email: [email protected] Email: [email protected] SOUTH AFRICA
Capetown
12 Julian Way, Somerset West
Business Park, Cape Town, 7129
South Africa
P/F: +27 (0) 28 313 2845
M: +27 (0) 73 234 2845
WEST AFRICA
Ghana
Ghana - Office
Spintex Road, Greater Accra
M: +233 (0) 24 4213 496
www.westernex.com.au