Page 1 of 11
WELL EQUIPPED
760 HP IDECO SBS H-44 DRILLING RIG
FOR SALE
Page 2 of 11
GENERAL SPECIFICATIONS
RIG TYPE: SBS IDECO H-44 CD Single Drum, 6-Axle drive-in
WORKING DEPTH:
• 8530' / 2600m with 5" Drill Pipe
DRAW WORKS:
• IDECO SBS: H-44 CD, Single Drum
• Drum Dimensions: Diameter 18" / 0.46m. Length 35.5"/0.9 m.
• Auxiliary Brake: Parkersburg V-80
• Nominal Input Power: 600 - 950 HP
• Drilling Line Diameter: 1-1/8"
RIG EQUIPMENT
MAST:
• Type: KM 111-268 AGH
• Free Height: 111ft
• Max. Hook Load: 268,000 lbs
• Serial Number: 460 (installed in February 1981)
• Hydraulic Catworks: Make-up / Brake-down (Certified by Derrick Services Limited, August 2009)
• Racking Capacity: 8530'/2,600 mtr, 5" DP W/10 stds 6-1/2" DCs
• Drill Depth / Capacity: 8530'/2600 mtr, 5" DP
• Wind Load Capacity: 100 Km/hr
• API Spec: 4F Quick Life telescoping mast type
• Integral Ladder c/w safety climbing devices to Monkey Board and Crown
• Mast Raising Cylinder assembly
• One (1) set of stairs from Drilling module to ground level
• One (1) set of stairs from Drillers Platform to Drilling Module c/w handrails
• New Bridal Line Installed August 20, 2010
• New Drill Line including 350m spare on spool installed August 20, 2010
* Derrick inspected and passed by Derrick Services Limited, Great Yarmouth, August 2009. * Re-inspected and passed by Practical Engineering, Brisbane, September 2012.
Page 3 of 11
Page 4 of 11
SUBSTRUCTURE:
• Work Floor Height: 4.17m
• Rotary Load: 130 mt.
• Set Back Load: Set back capacity total 95 tons with simultaneously 130 tons rotary load
* Inspected and passed by Derrick Services Limited, August 2009. * Re-inspected and passed by Practical Engineering, Brisbane, September 2012.
RIG RAMP:
• Quantity: One (1) Unit
• Rig Ramp: 800mm
• Unit is made of heavy duty aluminum construction for lightweight transport and handling.
ROTARY TABLE:
• Quantity: One (1) Unit
• Manufacturer: IDECO SBS
• Serial Number: 213
• Model: LR 20-1/2"
• Opening: 20-1/2" and 17-1/2"
• Solid Master Bushing: MSPC
• Static Capacity: 408 tons (maximum)
DRAW WORKS:
• Quantity: One (1) Unit
• Manufacturer: IDECO SBS
• Model: H-44 CD, Single Drum
• Drum Dimensions: Diameter 18" / 0.46m: Length 351 / 2" / 0.9m
• Auxiliary Brake: Parkersburg V-80
• Nominal Input Power: 600 - 950 HP
• Drilling Line Diameter: 1-1/8"
HOOK - BLOCK:
• Quantity: One (1) Unit
• Manufacturer: IDECO -SBS
• Model: UTB 160-4-30
• Load Capacity: 160 Tons
• Sheaves: 4 x 1-1/8"
* Recertified by Kestrel Engineering, Aberdeen, October 2009
* Recertified by Practical Engineering, September 2012
Page 5 of 11
CROWN BLOCK:
• Quantity: One (1) Unit
• Manufacturer: IDECO
• Sheaves: 5 Sheaves x 1-1/8" Drill Line
• Sheaves Diameters: 1 Unit 36", 4 Units 30" for 1-1/8" cable diameter
* Fast line Sheave and bearing assembly replaced with new in line with Derrick Services Limited recommendations October 2009. * Inspected by Practical Engineering, Brisbane, Sept 2012.
RIG/CARRIER POWER:
• Quantity: Two (2) Units
• Manufacturer: Caterpillar
• Model: 2 x D 343 TA-A
• Output: 380 x 380 HP Dual
• Transmission: Allison CLBT 586
• Gear Type: Compound angular gear, 5 forward and 1 reverse gear
• Power Distributor: Switchable for travel through Universal shafts to the rear axle or to the
Drawworks and Turntable
• Safety Device: Safety shutdown, mufflers & air intake emergency shutdown valve
GENERATOR SET:
• Quantity: 2 Units
• Type: 333 kVA Hitzinger three-phase synchronous generators
• Model: SGS 6C 40T
• Powered By: D 3406 Caterpillar diesel engine
• Switching Cabinet: Included
• All contained within a 40' / 12m sound-proof container
*All electrical work reinstalled to Australian Standards Sept 2012
CAT WALK & PIPE RACKS
• Cat Walk: Length: 45', Width: 5'5", Working Height: 3'
• Pipe Racks: Pipe Racks built specifically for the cat walk
INSTRUMENTATION:
• Weight Indicator: Martin Decker FS
• Torque Indicator: Martin Decker, Analog - Hydro Mechanical
Page 6 of 11
MUD PUMP:
• Quantity: One (1) Unit
• Manufacturer: EMSCO
• Model: F-800
• Engine: Caterpillar DT399
SHALE SHAKERS:
Quantity: Two (2) Units
Manufacturer: DERRICK FLC
Model: DUAL 530
MUD SYSTEM:
• Size: 810bbl
• Skid mounted: Yes
• Number of tanks: 3 + trip
Page 7 of 11
CASING & ACCESSORIES; TUBING
ITEM QTY DESCRIPTION
1 10 13 3/8" x 54.5 ppf BTC - K 55
2 2 Pup Joints 13 3/8" x 54.5 ppf BTC - K 55
3 5 Threaded box 13 3/8" BTC
4 18 10 3/4" x 40.5 ppf BTC - K 55
5 4 Pup Joints 10 3/4" x 40.5 ppf BTC - K 55
6 5 Threaded box 10 3/4" BTC
7 124 7 5/8" x 26.4 ppf BTC - L 80
8 4 Pup Joints 7 5/8" x 26.4 ppf BTC - L 80
9 5 Threaded box 7 5/8" BTC
10 194 5 1/2" x 17 ppf BTC - L 80
11 6 Pup Joints 5 1/2" x 17 ppf BTC - L 80
12 5 Threaded box 5 1/2" BTC
13 3 10 3/4 " Float shoe & float collar (set)
14 15 10 3/4" Centralizers
15 15 10 3/4" Stop collar
16 4 7 5/8" Float shoe & float collar (set)
17 25 7 5/8" Centralizers
18 25 7 5/8" Stop collar
19 4 5 1/2" Float shoe & float collar (set)
20 90 5 1/2" Centralizers
21 90 5 1/2" Stop collar
22 3 10 3/4" Top & Bottom cementing plugs (set)
23 4 7 5/8" Top & Bottom cementing plugs (set)
24 4 5 1/2" Top & Bottom cementing plugs (set)
25 1 10 3/4" Casing drift
26 1 7 5/8" Casing drift
27 1 5 1/2" Casing drift
28 136 2 7/8" Tubing 6.7 ppf EUE J 55
29 4 Pup joints 2 7/8" 6.7 ppf EUE J 55
30 3 Threaded box 2 7/8" EUE
SHAKER SCREENS
ITEM QTY DESCRIPTION
1 6 API 100
2 8 API 140
3 16 API 170
4 20 API 200
5 6 API 270
Page 8 of 11
HANDLING TOOLS
ITEM QTY DESCRIPTION
1 1 VARCO 6" SLX 150T BJ ELEVATOR (CASING)
2 1 VARCO 7 5/8" SLX 150T BJ ELEVATOR (CASING)
3 1 VARCO 10 3/4" SLX 150T BJ ELEVATOR (CASING)
4 1 SINGLE JOINT ELEVATOR 5-5 3/4"
5 1 SINGLE JOINT ELEVATOR 7-7 3/4"
6 1 SINGLE JOINT ELEVATOR 9 7/8-10 3/4"
7 1 DC SAFETY CLAMP AOT 12-116
8 1 DC SLIPS
9 1 DCS-L-SLIPS 8-9 1/2"
10 2 CMS-XL-SLIPS
11 1 LDC CON 77 SLIPS
DRILLING BITS (REED)
ITEM QTY DESCRIPTION
1 1 17 1/2" T 11
2 1 12 1/4" TC 11 CP
3 1 12 1/4" R 12 AP
4 1 9 7/8" TD 43 AP
5 1 9 7/8" TC 11 CP
6 1 PDC 6 3/4" DSH 416 S
7 1 6 3/4" R 30 AP
8 3 6 3/4" R 22 AP
9 1 Bit breaker 6 1/2" - 6 3/4" - REED
10 1 Bit breaker 17.5" - REED
11 1 Bit breaker 12 1/4" - REED
12 1 Bit Breaker 9 7/8" - REED
13 1 NO-GO Gauge 12 1/4"
14 2 NO-GO Gauge 9 7/8"
15 1 NO-GO Gauge 6 3/4"
Page 9 of 11
FLOAT VALVES & TOTCO RINGS
ITEM QTY DESCRIPTION
1 4 5F6R - Float valve
2 2 Repair kit for 6R
3 2 4R - Float valve
4 2 Repair kit for 4R
5 2 2F - 3R Float Valve
6 2 Repair kit for 3R
7 1 Totco Ring 6R - Tube down
8 4 Totco Ring 6R
9 2 Totco Ring 4R
10 2 Totco Ring 3R
11 2 Totco Ring 2R
MISCELLANEOUS
ITEM QTY DESCRIPTION
1 1 Maintenance & repair kit for drilling tongs
2 36 Diamond tong Dies - for tongs
3 50 Varco Circular buttons
4 50 Varco Circular buttons for DC slips
5 24 Varco Pyramid Tooth Tong Die
6 1 Set of drilling tongs with jaws
7 1 Repair kit for 4" Gate Valve
8 2 4" DMS SEAT
9 1 3" DMS SEAT
10 1 Repair kit for HCR - 4"x5K
11 2 Repair kit for 2 1/16" manual gate valve
12 1 Repair kit for 3 1/8" x 5k manual gate valve
13 3 Repair kit 4.0 Cylinder
14 25 Finger Stabilizer 3 1/2"
15 4 4" Hose socks
16 1 Pipe wrench 24"
17 4 Pipe wrench 36"
18 3 Pipe wrench 48"
19 1 Small chain tong
20 1 300mm Shifter
21 1 60" Stilson
22 1 Small crowbar
23 2 Large crowbar
Page 10 of 11
PRESSURE CONTROL
ITEM QTY DESCRIPTION
1 2 Ring gasket RX 24
2 1 Ring gasket RX 35
3 6 Ring gasket R 54
4 6 Ring gasket RX 54
5 5 2" T-part WECO 1502
6 1 2" 1502 WECO BOX - BOX (short)
7 1 2" T-part WECO 1502 - one end 2" NPT
8 1 2" Chicksan WECO 1502
9 20 4" 1502 WECO Gasket
10 32 2" 1502 WECO Gasket
11 2 Ring gasket RX 46
MUD PUMP EQUIPMENT
ITEM QTY DESCRIPTION
1 3 6 1/2" Liner
2 6 6" Liner
3 3 5 1/2" Liner
4 1 Liner cage
5 3 Piston rod
6 1 6 1/2" Piston assembly
7 12 6" Piston assembly
8 3 5 1/2" Piston assembly
9 6 5 1/2" Piston rubber kits
10 0 Seats
11 0 Valve insert
12 18 Liner seal
13 12 Valve cap seal
14 7 Valve springs
15 13 Booster springs
16 1 Hydraulic valve seat puller kit
17 1 Pulsation Dampener Gasket
18 1 0-6000 psi Pressure Gauge
19 3 J Stein Gasket + Seats (set)
20 6 Valve + Seat + Valve inserts (complete)
Page 11 of 11
BOP STACK & WELL COMPLETION
ITEM QTY DESCRIPTION
1 1 MUD CROSS 11" - 11" 5M C/W 2 SIDE OUTLETS
2 1 DSA 11" - 11" X 5M
3 3 CASING HEAD 11" X 5M - 10 3/4" C/W STUDS & NUTS
4 1 CASING SPOOL 11" - 11" X 5M - 5 1/2" C/W STUDS & NUTS
5 1 BACK PRESSURE VALVE
6 1 TWO WAY CHECK VALVE
7 1 RUNNING TOOL
8 1 T-ROD
9 1 HCR 3 1/8" X 5M
10 1 CHOKE MANIFOLD 2 1/16" X 10M + CHOKE PANEL
11 1 2" COFLEX HOSE FOR CHOKE MANIFOLD
12 1 11" WEAR BUSHING (10" ID) + TEST PLUG
13 1 7 1/16" WEAR BUSHING (6" ID) + TEST PLUG
14 4 1" X 10m BOP HOSE
15 2 1" X 6m BOP HOSE
16 1 Energise pump - seal assembly (kit)
17 1 4" COFLEX HOSE
CROSS OVERS, KELLY COCK, IBOP
ITEM QTY DESCRIPTION
1 1 3 1/2 REG (B) X 3 1/2 IF (B)
2 2 4 1/2 IF (B) X 3 1/2 IF (P)
3 1 3 1/2 IF (B) X 3 1/2 IF (P)
4 1 4 1/2 IF (B) X 4 1/2 IF (P)
5 1 3 1/2 IF (B) X 3 1/2 IF (P) X 2" 1502
6 1 3 1/2 IF (B) X 3 1/2 REG (B)
7 1 6 5/8 REG (P) X 6 5/8 REG (B)
8 1 SAVER SUB 6 5/8 REG (P) X 4" IF (P)
9 1 6 5/8 REG (P) X 6 5/8 REG (B)
10 1 6 5/8 REG (P) LH X 6 5/8 REG (B) LH
11 1 IBOP 3 1/2" IF
12 1 10 3/4" BTC (P) X 2" 1502
13 1 7 5/8" BTC (P) X 2" 1502
14 1 5 1/2" BTC (P) X 2" 1502
15 1 2 7/8" EUE X 2" 1502
16 1 LIFTING CAP 2 7/8" EUE
17 2 4 1/2" IF PUP JOINT
Page 12 of 11
OTHER TOOLS
ITEM QTY DESCRIPTION
1 1 POWER TONG
2 1 MUD SAVER (KELLY KAN + SPARE INSERT KIT)
3 1 KELLY SPINNER C/W LIFTING CAP
4 2 5T CHAIN HOIST
5 1 PIPE SPINNER
6 1 ELEVATOR LINKS
7 1 ELEVATOR LINKS 72" LONG 250 T
8 1 MD TOTCO SURVEY TOOL
9 1 USED 12 1/4 BIT (W/O NOZZLES)
10 5 WIRE ROPE REELS (FOR RIG)
VARIOUS TOOLS AND EQUIPMENT