Welcome to the latest edition of the Ace Manufacturing product catalogue.
It features several product groups including commercial 3R enclosures, type 4/12
enclosures, splitters, gutters, data product and power pedestals.
This catalogue is a sampling of product available as we also specialize in custom product.
If you don’t see the product you require contact us and we will assist you in designing a
product that fits your needs.
Ace Manufacturing’s regional sales reps and agents are available for product information
and technical support. For information on local support contact us at 1-866-352-7145 or
visit us at www.acemfg.com.
We look forward to serving you!
Weatherproof Enclosures Type 3R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1Control Cabinets Type 3R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 2Control Cabinets Type 3R (No Backpan) . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3Meter Cabinets Type 3R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4Telephone Cabinets Type 3R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4Splitters Boxes Type 3R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5Splitter Troughs Type 3R (3 Wire) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6Splitter Troughs Type 3R (4 Wire) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7Continuous Buss Gutter Type 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8Continuous Buss Gutter (3 Wire w/Lugs) Type 1 . . . . . . . . . . . . . .Page 9Continuous Buss Gutter (4 Wire w/Lugs) Type 1 . . . . . . . . . . . . . .Page 10Wireways Type 3R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 11Aluminum Wireways Type 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 11Ground Wells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12Main and Secondary Lugs (Cu-Al) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12Main and Secondary Double Lugs (Cu-Al) . . . . . . . . . . . . . . . . . . . . . . . . .Page 13Standard Splitter Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 13Accessory Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 14Freedom Series Type 4/12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 15Series 1000 Type 4/12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 16Series 3000 Type 4/12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 17Current Transformer Cabinets Type 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 18B.C. Phone/Cable Distribution Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 19, 20Low Voltage Distribution Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 20APB Parking Lot Outlet Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 21AP Series Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 22AP-S Short Series Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 23Series 3 Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 24Series 3 (MB) Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 25PAR Parkside Series Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 26APR Series Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 27APR Series (Split) Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 28APR Marine Grade Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 29APR Low Voltage Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 30APR Wide and Extra Wide Body Power Pedestals . . . . . . . . . . . .Page 31APR Hose Bib Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 32APR Top Light Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 33APR Side Light Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 34APR Back to Back Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 35Splitter Blocks For Power Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 36ACE Data Products - 19” EIA Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 37ACE Data Products - 19” EIA RacksRack-mount Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 38
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Gasketed lift-off cover- No backpan- Wall-mounting ears top and bottom- Galvanized steel construction- Industry standard ASA-61 grey industrial powder coat finish- Also available in stainless steel (consult factory)- Custom sizes available (consult factory)
Model # Description
WP 664 6"H x 6"W x 4"D
WP 884 8"H x 8"W x 4"D
WP 886 8"H x 8"W x 6"D
WP 10104 10"H x 10"W x 4"D
WP 10106 10"H x 10"W x 6"D
WP 12124 12"H x 12"W x 4"D
WP 12126 12"H x 12"W x 6"D
WP 16166 16"H x 16"W x 6"D
WP 18186 18"H x 18"W x 6"D
WP 24246 24"H x 24"W x 6"D
ALUMINUM WEATHERPROOFENCLOSURES
- Same as above except aluminum construction andnon-painted finish
Model # Description
WPA 664 6"H x 6"W x 4"D
WPA 884 8"H x 8"W x 4"D
WPA 886 8"H x 8"W x 6"D
WPA 10104 10"H x 10"W x 4"D
WPA 10106 10"H x 10"W x 6"D
WPA 12124 12"H x 12"W x 4"D
WPA 12126 12"H x 12"W x 6"D
1
WEATHERPROOF ENCLOSURE TYPE 3RWEATHERPROOF ENCLOSURE TYPE 3R
QUALITY IS OUR STRENGTH
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Gasketed hinged cover c/w padlockable hasp- White steel backpan- Wall-mounting ears top and bottom- Galvanized steel construction- Industry standard ASA-61 grey industrial powder coat finish- Also available in stainless steel (consult factory)- Custom sizes available (consult factory)
Model # Description
WPHH 864 8"H x 6"W x 4"D
WPHH 1084 10"H x 8"W x 4"D
WPHH 1086 10"H x 8"W x 6"D
WPHH 12104 12"H x 10"W x 4"D
WPHH 12106 12"H x 10"W x 6"D
WPHH 12126 12"H x 12"W x 6"D
WPHH 14126 14"H x 12"W x 6"D
WPHH 16146 16"H x 14"W x 6"D
WPHH 18166 18"H x 16"W x 6"D
WPHH 24186 24"H x 18"W x 6"D
ALUMINUM CONTROL CABINETS- Same as above except aluminum construction and
non-painted finish
Model # Description
W PHHA 864 8"H x 6"W x 4"D
W PHHA 1084 10"H x 8"W x 4"D
W PHHA 12106 12"H x 10"W x 6"D
W PHHA 14126 14"H x 12"W x 6"D
W PHHA 16146 16"H x 14"W x 6"D
W PHHA 18166 18"H x 16"W x 6"D
W PHHA 24186 24"H x 18"W x 6"D
2
CONTROL CABINETS TYPE 3RCONTROL CABINETS TYPE 3R
QUALITY IS OUR STRENGTH
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Gasketed hinged cover c/w padlockable hasp- No backpan- Wall-mounting ears top and bottom- Galvanized steel construction- Industry standard ASA-61 grey industrial powder coat finish- Also available in stainless steel (consult factory)- Custom sizes available (consult factory)
Model # Description
W PHH 664-NB 6"H x 6"W x 4"D
W PHH 884-NB 8"H x 8"W x 4"D
W PHH 10104-NB 10"H x 10"W x 4"D
W PHH 10106-NB 10"H x 10"W x 6"D
W PHH 12124-NB 12"H x 12"W x 4"D
W PHH 16168-NB 16"H x 16"W x 8"D
W PHH 18168-NB 18"H x 16"W x 8"D
W PHH 24168-NB 24"H x 16"W x 8"D
W PHH 24246-NB 24"H x 24"W x 6"D
W PHH 24248-NB 24"H x 24"W x 8"D
W PHH 242410-NB 24"H x 24"W x 10"D
W PHH 30248-NB 30"H x 24"W x 8"D
W PHH 302410-NB 30"H x 24"W x 10"D
W PHH 30306-NB 30"H x 30"W x 6"D
W PHH 30308-NB 30"H x 30"W x 8"D
W PHH 303010-NB 30"H x 30"W x 10"D
W PHH 362410-NB 36"H x 24"W x 10"D
W PHH 363610-NB 36"H x 36"W x 10"D
W PHH 363612-NB 36"H x 36"W x 12"D
ALUMINUM CONTROL CABINETS- Same as above except aluminum construction and
non-painted finish
Model # Description
WPHHA 664-NB 6"H x 6"W x 4"D
WPHHA 666-NB 6"H x 6"W x 6"D
WPHHA 884-NB 8"H x 8"W x 4"D
WPHHA 886-NB 8"H x 8"W x 6"D
WPHHA 10104-NB 10"H x 10"W x 4"D
WPHHA 10106-NB 10"H x 10"W x 6"D
WPHHA 12124-NB 12"H x 12"W x 4"D
WPHHA 12126-NB 12"H x 12"W x 6"D
3
CONTROL CABINETS TYPE 3R (NO BACKPAN)CONTROL CABINETS TYPE 3R (NO BACKPAN)
QUALITY IS OUR STRENGTH
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Gasketed hinged cover c/w padlockable hasps- Driphood- White steel backpan- Wall-mounting ears top and bottom- Galvanized steel construction- Industry standard ASA-61 grey industrial powder coat finish
Model # Description
WMC 27 27"H x 13"W x 10"D Single Door
WMC 30 30"H x 30"W x 10"D Single Door
WMC 36 36"H x 36"W x 12"D Single Door
WMC 48 48"H x 48"W x 12"D Double Door
c/w Three Point Lock
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Gasketed hinged cover c/w keyed L-Handle- Dripshield- Plywood backpan- Wall-mounting ears top and bottom- Mild steel construction- Industry standard ASA-61 grey industrial powder coat finish
Model # Description
WPT 18124 18"H x 12"W x 4"D
WPT 18126 18"H x 12"W x 6"D
WPT 24184 24"H x 18"W x 4"D
WPT 24186 24"H x 18"W x 6"D
WPT 24244 24"H x 24"W x 4"D
WPT 24246 24"H x 24"W x 6"D
WPT 36244 36"H x 24"W x 4"D
WPT 36246 36"H x 24"W x 6"D
TELEPHONE CABINETS TYPE 3RTELEPHONE CABINETS TYPE 3R
4
METER CABINETS TYPE 3RMETER CABINETS TYPE 3R
QUALITY IS OUR STRENGTH
TRAILER SPLITTER BOXES- same as above except padlockable
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Lift-off cover- Cu/Al lugging with main and six secondaries- Designed for pole or wall mounting- Rural service box- Galvanized steel construction- N
- Custom sizes available
on-painted finish- Higher amperage available
(consult factory)
Model # Amp Mains Secondaries Description
APS 100 125 (1) #14 to 1/0 #14 to #2 14"H x 9"W x 3 1/2"D
APS 100-4W 125 (1) #14 to 1/0 #14 to #2 18 1/4"H x 9"W x 3 1/2"D
APS 200 225 (1) #6 to 300 MCM #14 to 2/0 14"H x 11"W x 5 1/2"D
APS 200-4W 225 (1) #6 to 300 MCM #14 to 2/0 18 1/4"H x 11"W x 5 1/2"D
APS 200M 225 (2) #6 to 300 MCM #14 to 2/0 14"H x 11"W x 5 1/2"D
APS 200-OS 225 (1) #6 to 300 MCM #14 to 2/0 18 1/4"H x 11"W x 5 1/2"D
Model # Amp Mains Secondaries Description
APST 125 125 (1) #14 to 1/0 #14 to #2 14"H x 9"W x 3 1/2"D
APST 225 225 (1) #6 to 300 MCM #14 to 2/0 14"H x 11"W x 5 1/2"D
ALUMINUM TRAILER SPLITTER BOXES- same as above except aluminum construction and non-painted finish
Model # Amp Mains Secondaries Description
APSTA 125 125 (1) #14 to 1/0 #14 to #2 14"H x 9"W x 3 1/2"D
APSTA 225 225 (1) #6 to 300 MCM #14 to 2/0 14"H x 11"W x 5 1/2"D
5
SPLITTER BOXES TYPE 3RSPLITTER BOXES TYPE 3R
QUALITY IS OUR STRENGTH
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Gasketed lift-off cover- Cu/Al lugging with main and six secondaries- Wall mounting- Mild steel construction- Industry standard ASA-61 grey industrial powder coat finish- Custom sizes available (consult factory)
Model # Amp Mains Secondaries Description
3S-100-24-3W 125 #14 to 1/0 #14 to #2 24"H x 9"W x 6"D
3S-100-36-3W 125 #14 to 1/0 #14 to #2 36"H x 10"W x 6"D
3S-100-48-3W 125 #14 to 1/0 #14 to #2 48"H x 10"W x 6"D
3S-225-24-3W 225 #6 to 300 MCM #14 to 2/0 24"H x 9"W x 6"D
3S-225-36-3W 225 #6 to 300 MCM #14 to 2/0 36"H x 10"W x 6"D
3S-225-48-3W 225 #6 to 300 MCM #14 to 2/0 48"H x 10"W x 6"D
3S-400-24-3W 400
(1) #4 to 600 MCM or
(2) 1/0 to 250 MCM #6 to 3/0 24"H x 10"W x 6"D
3S-400-36-3W 400
(1) #4 to 600 MCM or
(2) 1/0 to 250 MCM #6 to 3/0 36"H x 10"W x 6"D
3S-400-48-3W 400
(1) #4 to 600 MCM or
(2) 1/0 to 250 MCM #6 to 3/0 48"H x 10"W x 6"D
3S-400-60-3W 400
(1) #4 to 600 MCM or
(2) 1/0 to 250 MCM #6 to 3/0 60"H x 10"W x 6"D
3S-400-72-3W 400
(1) #4 to 600 MCM or
(2) 1/0 to 250 MCM #6 to 3/0 72"H x 10"W x 6"D
3S-600-48-3W 600 (2) #6 to 600 MCM #6 to 3/0 48"H x 12"W x 7"D
3S-600-60-3W 600 (2) #6 to 600 MCM #6 to 3/0 60"H x 12"W x 7"D
125 - 225A 400 - 600A400 - 600A
(60”W & UP)
6
SPLITTER TROUGHS TYPE 3R (3 WIRE)SPLITTER TROUGHS TYPE 3R (3 WIRE)
QUALITY IS OUR STRENGTH
FEATURES AND BENEFITS- EEMAC/CEMA 3R Type Enclosure (Weatherproof)- Gasketed lift-off cover- Cu/Al lugging with main and six secondaries- Wall mounting- Mild steel construction- Industry standard ASA-61 grey industrial powder coat finish- Custom sizes available (consult factory)
Model # Amp Mains Secondaries Description
3S-100-36-4W 125 #14 to 1/0 #14 to #2 36"H x 10"W x 6"D
3S-100-48-4W 125 #14 to 1/0 #14 to #2 48"H x 10"W x 6"D
3S-125-60-4W 125 #14 to 1/0 #14 to #2 60"H x 10"W x 6"D
3S-100-72-4W 125 #14 to 1/0 #14 to #2 72"H x 10"W x 6"D
3S-225-36-4W 225 #14 to 1/0 #6 to 3/0 36"H x 10"W x 6"D
3S-225-48-4W 225 #6 to 300 MCM #6 to 3/0 48"H x 10"W x 6"D
3S-225-60-4W 225 #6 to 300 MCM #6 to 3/0 60"H x 10"W x 6"D
3S-225-72-4W 225 #6 to 300 MCM #6 to 3/0 72"H x 10"W x 6"D
3S-400-48-4W 400
(1) #4 to 600 MCM or
(2) 1/0 to 250 MCM #6 to 3/0 48"H x 10"W x 6"D
3S-400-60-4W 400
(1) #4 to 600 MCM or
(2) 1/0 to 250 MCM #6 to 3/0 60"H x 10"W x 6"D
3S-400-72-4W 400
(1) #4 to 600 MCM or
(2) 1/0 to 250 MCM #6 to 3/0 72"H x 10"W x 6"D
3S-600-48-4W 600 (2) #4 to 600 MCM #6 to 3/0 48"H x 12"W x 7"D
3S-600-60-4W 600 (2) #4 to 600 MCM #6 to 3/0 60"H x 12"W x 7"D
3S-600-72-4W 600 (2) #4 to 600 MCM #6 to 3/0 72"H x 12"W x 7"D
125 - 225A 400 - 600A400 - 600A
(60”W & UP)
7
SPLITTER TROUGHS TYPE 3R (4 WIRE)SPLITTER TROUGHS TYPE 3R (4 WIRE)
QUALITY IS OUR STRENGTH
FEATURES AND BENEFITS- EEMAC/CEMA Type 1 Enclosure (General Purpose)- Cover c/w screws- Aluminum bussing- Wall mounting ears top and bottom- Mild steel construction- Industry standard ASA-61 grey industrial powder coat finish- Also available in
(consult factory)- Custom sizes available
EEMAC/CEMA Type 3R, 4 and 12 ratings
(consult factory)
Model # Amps Description
800-6-4 800 29"H x 72"W x 10"D
800-8-4 800 29"H x 96"W x 10"D
800-10-4 800 29"H x 120"W x 10"D
800-12-4 800 29"H x 144"W x 10"D
1000-6-4 1000 29"H x 72"W x 10"D
1000-8-4 1000 29"H x 96"W x 10"D
1000-10-4 1000 29"H x 120"W x 10"D
1000-12-4 1000 29"H x 144"W x 10"D
1200-6-4 1200 29"H x 72"W x 10"D
1200-8-4 1200 29"H x 96"W x 10"D
1200-10-4 1200 29"H x 120"W x 10"D
1200-12-4 1200 29"H x 144"W x 10"D
1600-6-4 1600 29"H x 72"W x 10"D
1600-8-4 1600 29"H x 96"W x 10"D
1600-10-4 1600 29"H x 120"W x 10"D
1600-12-4 1600 29"H x 120"W x 10"D
FEATURES AND BENEFITS- Same as above except 3 wire configuraiton
Model # Amps Description
800-6-3 800 29"H x 72"W x 10"D
800-8-3 800 29"H x 96"W x 10"D
800-10-3 800 29"H x 120"W x 10"D
800-12-3 800 29"H x 144"W x 10"D
1000-6-3 1000 29"H x 72"W x 10"D
1000-8-3 1000 29"H x 96"W x 10"D
1000-10-3 1000 29"H x 120"W x 10"D
1000-12-3 1000 29"H x 144"W x 10"D
1200-6-3 1200 29"H x 72"W x 10"D
1200-8-3 1200 29"H x 96"W x 10"D
1200-10-3 1200 29"H x 120"W x 10"D
1200-12-3 1200 29"H x 144"W x 10"D
1600-6-3 1600 29"H x 72"W x 10"D
1600-8-3 1600 29"H x 96"W x 10"D
1600-10-3 1600 29"H x 120"W x 10"D
1600-12-3 1600 29"H x 120"W x 10"D
8
CONTINUOUS BUSS GUTTER TYPE 1CONTINUOUS BUSS GUTTER TYPE 1
QUALITY IS OUR STRENGTH
FEATURES AND BENEFITS- EEMAC/CEMA Type 1 Enclosure (General Purpose)- Cover c/w screws- Aluminum bussing- Pre-installed lugs for convenience- Wall mounting ears top and bottom- Mild steel construction- Industry standard ASA-61 grey industrial powder coat finish- Also available in (consult factory)- Custom sizes available
EEMAC/CEMA Type 3R, 4 and 12 ratings(consult factory)
Model # Amps Description Main Branch
800-6-3-L 800 29"H x 72"W x 10"D (2) 600 MCM (2) #6 to 300 MCM + (6) #14 to 2/0
800-8-3-L 800 29"H x 96"W x 10"D (2) 600 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
800-10-3-L 800 29"H x 120"W x 10"D (2) 600 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
800-12-3-L 800 29"H x 144"W x 10"D (2) 600 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
1000-6-3-L 1000 29"H x 72"W x 10"D (2) 800 MCM (2) #6 to 300 MCM + (6) #14 to 2/0
1000-8-3-L 1000 29"H x 96"W x 10"D (2) 800 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
1000-10-3-L 1000 29"H x 120"W x 10"D (2) 800 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
1000-12-3-L 1000 29"H x 144"W x 10"D (2) 800 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
1200-6-3-L 1200 29"H x 72"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (6) #14 to 2/0
1200-8-3-L 1200 29"H x 96"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
1200-10-3-L 1200 29"H x 120"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
1200-12-3-L 1200 29"H x 144"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
1600-6-3-L 1600 29"H x 72"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (6) #14 to 2/0
1600-8-3-L 1600 29"H x 96"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
1600-10-3-L 1600 29"H x 120"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
1600-12-3-L 1600 29"H x 144"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
CONTINUOUS BUSS GUTTER
TYPE 1 (3 WIRE)WITH LUGS
CONTINUOUS BUSS GUTTER
WITH LUGS TYPE 1 (3 WIRE)
QUALITY IS OUR STRENGTH
9
FEATURES AND BENEFITS- EEMAC/CEMA Type 1 Enclosure (General Purpose)- Cover c/w screws- Aluminum bussing- Pre-installed lugs for convenience- Wall mounting ears top and bottom- Mild steel construction- Industry standard ASA-61 grey industrial powder coat finish- Also available in (consult factory)- Custom sizes available
EEMAC/CEMA Type 3R, 4 and 12 ratings(consult factory)
Model # Amps Description Main Branch
800-6-4-L 800 29"H x 72"W x 10"D (2) 600 MCM (2) #6 to 300 MCM + (6) #14 to 2/0
800-8-4-L 800 29"H x 96"W x 10"D (2) 600 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
800-10-4-L 800 29"H x 120"W x 10"D (2) 600 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
800-12-4-L 800 29"H x 144"W x 10"D (2) 600 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
1000-6-4-L 1000 29"H x 72"W x 10"D (2) 800 MCM (2) #6 to 300 MCM + (6) #14 to 2/0
1000-8-4-L 1000 29"H x 96"W x 10"D (2) 800 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
1000-10-4-L 1000 29"H x 120"W x 10"D (2) 800 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
1000-12-4-L 1000 29"H x 144"W x 10"D (2) 800 MCM (4) #6 to 300 MCM + (12) #14 to 2/0
1200-6-4-L 1200 29"H x 72"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (6) #14 to 2/0
1200-8-4-L 1200 29"H x 96"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
1200-10-4-L 1200 29"H x 120"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
1200-12-4-L 1200 29"H x 144"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
1600-6-4-L 1600 29"H x 72"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (6) #14 to 2/0
1600-8-4-L 1600 29"H x 96"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
1600-10-4-L 1600 29"H x 120"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
1600-12-4-L 1600 29"H x 144"W x 10"D (2) 1000 MCM (2) #6 to 300 MCM + (12) #14 to 2/0
CONTINUOUS BUSS GUTTER
WITH LUGS TYPE 1 (4 WIRE)
CONTINUOUS BUSS GUTTER
WITH LUGS TYPE 1 (4 WIRE)
QUALITY IS OUR STRENGTH
10
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Screw-on cover- Empty splitter trough- Wall mounting ears left and right- Mild steel construction- Industry standard ASA-61 grey industrial powder coat finish- Also available in aluminum and stainless steel (consult factory)- Custom sizes available (consult factory)
Model # Description
WP 240906 24"H x 9"W x 6"D
WP 361006 36"H x 10"W x 6"D
WP 481006 48"H x 10"W x 6"D
WP 481207 48"H x 12"W x 7"D
WP 601006 60"H x 10"W x 6"D
WP 601207 60"H x 12"W x 7"D
WP 721006 72"H x 10"W x 6"D
WP 721207 72"H x 12"W x 7"D
11
WIREWAYS TYPE 3RWIREWAYS TYPE 3R
QUALITY IS OUR STRENGTH
FEATURES AND BENEFITS- EEMAC/CEMA Type 1 Enclosure (General Purpose)- Cover c/w screws- Empty splitter trough- Wall mounting ears left and right- Aluminum construction- Non-painted finish
Model # Description
GPA 120404 12"H x 4"W x 4"D
GPA 240404 24"H x 4"W x 4"D
GPA 360404 36"H x 4"W x 4"D
GPA 480404 48"H x 4"W x 4"D
ALUMINUM WIREWAYS TYPE 1ALUMINUM WIREWAYS TYPE 1
SL-2
SL-300
FEATURES AND BENEFITS- Single lugs- Installation extra
Model # Wire Size
SL - 2 #14 to 2
SL - 1/0 #14 to 1/0
SL - 2/0 #6 to 2/0
SL - 300 #6 to 300 MCM
SL - 350 #6 to 350 MCM
SL - 600 #2 to 600 MCM
SL - 800 300 MCMto 800 MCM
MAIN AND SECONDARY LUGS (CU-AL)MAIN AND SECONDARY LUGS (CU-AL)
GROUND WELLSGROUND WELLS
QUALITY IS OUR STRENGTH
SL-2/0
SL-800
SL-350
SL-1/0
SL-600
FEATURES AND BENEFITS- 22 ga. galvanized steel construction- Lift-off cover
Model # Description
AGW 12 1/4"H x 10"DIA
12
FEATURES AND BENEFITS- Double lugs- Installation extra
FEATURES AND BENEFITS- Each block has six secondaries- 600V Cu/Al rated- Installation extra
Model # Wire Size
DL - 250 2 X #6 to 250 MCM
DL - 350 2 X #6 to 350 MCM
DL - 600 2 X #2 to 600 MCM
DL - 800 2 X 350 MCM to 800 MCM
DL - 1000 2 X 500 MCM to 1000 MCM
STANDARD SPLITTER BLOCKSSTANDARD SPLITTER BLOCKS
Model # Amp Primary Wire Size Branch Amps Branch Wire Size
P - 125 125 #14 to 1/0 70 #14 to #2
P - 225 225 #6 to 300 MCM 125 #14 to 2/0
P - 225M 225 (2) #6 to 300 MCM 125 #14 to 2/0
P - 400 400
#4 to 600 MCM or
(2) 250 MCM to 1/0 125 #5 to 3/0
P - 600 600 (2) #4 to 600 MCM 125 #14 to 3/0
MAIN AND SECONDARY DOUBLE LUGS (CU-AL)MAIN AND SECONDARY DOUBLE LUGS (CU-AL)
QUALITY IS OUR STRENGTH
DL-800 DL-1000
DL-350
DL-600
DL-250
P-225 P-225M
P-600P-400
P-125
13
FEATURES AND BENEFITS- CSA approved latching mechanisms- Installation extra- Additional accessories available (consult factory)
Model # Description
L-101 Finger Hasp
L-102 Plated Keyed Flush Lock
L-103 Keyed L-Handle & Cam
L-104 Keyed 3 Pt. Roller Lock Set
L-105 Padlockable Handle
WQTNL201 Winged Quarter-Turn & Cam
WQTL201 Winged Locking Quarter-Turn & Cam
QTNL202 Flush Quarter-Turn & Cam
QTL202 Flush Locking Quarter-Turn & Cam
PQT203 Padlockable Quarter-Turn & Cam
FINGER HASP(L-101)
QUARTER-TURN FASTENER(QTNL202)
PADLOCKABLEQUARTER-TURN FASTENER
(PQT203)
PADLOCKABLE HANDLE(L-105)
STAINLESS STEELPADLOCKABLE HANDLE
(L-105 CUSTOM)
KEYED L-HANDLE AND CAM(L-103)
WINGEDQUARTER-TURN FASTENER
(WQTNL201)
ACCESSORY LOCKSACCESSORY LOCKS
QUALITY IS OUR STRENGTH
14
FEATURES AND BENEFITS- Elimination of cumbersome clamps or clips- Designed exclusively for electrical enclosures- completely memory-free- Manufactured to both Canadian and US electrical standards- All components can be recycled at the completion of product ilfecycle- Freedom Series not only meets but significantlyexceeds minimum Nema/Cema/EEMAC standards- Consult factory for sizes and pricing
MODERN DESIGN:DEDICATED HINGE AND LOCKING ASSEMBLY:EXTRUDED EDPM RUBBER COMPOSITE GASKETING:DUAL RATED CERTIFICATION:ENVIRONMENTALLY FRIENDLY:
MANUFACTURED TO EXCEED STANDARD:
TECHNICAL SPECIFICATIONS- FREEDOM SERIES 1: 24”H to 87”H; Multi-point rod latch locking mechanism; bolted or welded hinge- FREEDOM SERIES 2: 24”H to 90”H; Quarter-turn locking mechanism; bolted or welded hinge- FREEDOM SERIES 3: 4” to 24”H; Quarter-turn locking mechanism; welded hinge- Unlimited width range- Available in mild steel, stainless steel and aluminum
FREEDOM SERIES TYPE 4/12FREEDOM SERIES TYPE 4/12
QUALITY IS OUR STRENGTH
15
FEATURES AND BENEFITS- EEMAC/CEMA Type 4/12 Enclosure (Water & Dust-tight)- Hinged g cover- Stainless steel clip fasteners- White steel backpan- Wall mounting ears top and bottom- 16 ga. mild steel construction- Industry standard ASA-61 grey industrial powder coat finish
asketed
Model # Description
664 - 1000 6"H x 6"W x 4"D
864 - 1000 8"H x 6"W x 4"D
1084 - 1000 10"H x 8"W x 4"D
12105 - 1000 12"H x 10"W x 5"D
14126 - 1000 14"H x 12"W x 6"D
16146 - 1000 16"H x 14"W x 6"D
STAINLESS STEEL SERIES 1000ENCLOSURES
- Same as above except 304 #4 finish stainless steelconstruction
Model # Description
664 - 1000SS 6"H x 6"W x 4"D
864 - 1000SS 8"H x 6"W x 4"D
1084 - 1000SS 10"H x 8"W x 4"D
12105 - 1000SS 12"H x 10"W x 5"D
14126 - 1000SS 14"H x 12"W x 6"D
16146 - 1000SS 16"H x 14"W x 6"D
ALUMINUM SERIES 1000ENCLOSURES- Same as above except aluminum construction and
non-painted finish
Model # Description
664 - 1000A 6"H x 6"W x 4"D
864 - 1000A 8"H x 6"W x 4"D
1084 - 1000A 10"H x 8"W x 4"D
12105 - 1000A 12"H x 10"W x 5"D
14126 - 1000A 14"H x 12"W x 6"D
16146 - 1000A 16"H x 14"W x 6"D
SERIES 1000 TYPE 4/12SERIES 1000 TYPE 4/12
QUALITY IS OUR STRENGTH
16
FEATURES AND BENEFITS- EEMAC/CEMA Type 4/12 Enclosure (Water & Dust-tight)- Hinged g cover- Stainless steel clamp fasteners- White steel backpan- Wall mounting ears top and bottom- 12 or 14 ga. mild steel construction- Industry standard ASA-61 grey industrial powder coat finish
asketed
Model # Description
16126 - 3000 16"H x 12"W x 6"D
16166 - 3000 16"H x 16"W x 6"D
20166 - 3000 20"H x 16"W x 6"D
20168 - 3000 20"H x 16"W x 8"D
20206 - 3000 20"H x 20"W x 6"D
20208 - 3000 20"H x 20"W x 8"D
24166 - 3000 24"H x 16"W x 6"D
24208 - 3000 24"H x 20"W x 8"D
24246 - 3000 24"H x 24"W x 6"D
24248 - 3000 24"H x 24"W x 8"D
30206 - 3000 30"H x 20"W x 6"D
30208 - 3000 30"H x 20"W x 8"D
30246 - 3000 30"H x 24"W x 6"D
30248 - 3000 30"H x 24"W x 8"D
36246 - 3000 36"H x 24"W x 6"D
36248 - 3000 36"H x 24"W x 8"D
36308 - 3000 36"H x 30"W x 8"D
42308 - 3000 42"H x 30"W x 8"D
42368 - 3000 42"H x 36"W x 8"D
48368 - 3000 48"H x 36"W x 8"D
60368 - 3000 60"H x 36"W x 8"D
242010 - 3000 24"H x 20"W x 10"D
302412 - 3000 30"H x 24"W x 12"D
363010 - 3000 36"H x 30"W x 10"D
363012 - 3000 36"H x 30"W x 12"D
483010 - 3000 48"H x 30"W x 10"D
483612 - 3000 48"H x 36"W x 12"D
603610 - 3000 60"H x 36"W x 10"D
603612 - 3000 60"H x 36"W x 12"D
SERIES 3000 TYPE 4/12SERIES 3000 TYPE 4/12
QUALITY IS OUR STRENGTH
17
FEATURES AND BENEFITS- EEMAC/CEMA Type 1 Enclosure (General Purpose)- Formed screw-on cover (sealable)- 14 ga. galvanized steel backpan- 14 ga. galvanized steel construction- Non-painted finish
Model # Single Phase Service Three Phase Service Description
CT 165308-STL up to 600A up to 400A & Below 300V 16 1/2"H x 30"W x 8"D
CT 184216-STL 625A and above 425A & Above and Above 300V 18"H x 42"W x 16"D
CT 184295-STL 625A and above 425A & Above and Above 300V 18"H x 42"W x 9 1/2"D
CT 302010-STL up to 600A up to 400A & Below 300V 30"H x 20"W x 10"D
CT 364224-STL up to 600A up to 400A & Below 300V 36"H x 42"W x 24"D
ALUMINUM CURRENT TRANSFORMER CABINETS- same as above except aluminum construction
Model # Single Phase Service Three Phase Service Description
CT 165308-AL up to 600A up to 400A & Below 300V 16 1/2"H x 30"W x 8"D
CT 184216-AL 625A and above 425A & Above and Above 300V 18"H x 42"W x 16"D
CT 302010-AL up to 600A up to 400A & Below 300V 30"H x 20"W x 10"D
CT 364224-AL up to 600A up to 400A & Below 300V 36"H x 42"W x 24"D
CURRENT TRANSFORMER CABINETS TYPE 1CURRENT TRANSFORMER CABINETS TYPE 1
QUALITY IS OUR STRENGTH
18
FEATURES AND BENEFITS- For installation in townhouses- B.C. Tel/Rogers Cable approved design-- Flush mount- 12 ga. aluminum construction- Non-painted finish except cover
Lift-off cover with almond industrial powder coat finish
Model # Description
ACB 9 10 3/16"H x 9"W x 5 5/8"D
B.C. PHONE/CABLE DISTRIBUTION BOXESB.C. PHONE/CABLE DISTRIBUTION BOXES
QUALITY IS OUR STRENGTH
FEATURES AND BENEFITS
- B.C. Tel/Rogers Cable approved design- Cover not supplied- Flush mount- 12 ga. aluminum construction- Non-painted finish
- For installation in single family dwelling units
Model # Description
ACB 10 10 3/16"H x 7"W x 5 1/8"D
19
FEATURES AND BENEFITS- For installation in multi-unit apartments and high-rises- B.C. Tel/Rogers Cable approved design- Lift-off 14 ga. mild steel cover with almond industrial powder coat
finish- Flush mount- 16 ga. galvanized steel construction except cover- Non-painted finish except cover
B.C. PHONE/CABLE DISTRIBUTION BOXESB.C. PHONE/CABLE DISTRIBUTION BOXES
QUALITY IS OUR STRENGTH
Model # Description
ACB 8 6 11/16"Hx 8 5/16"W x 3 3/8"D
FEATURES AND BENEFITS- For installation in single family dwelling units- Hinged gasketed cover- Flush mount ears left and right (removable)- 16 ga. wipecoat steel construction- Industry standard ASA-61 grey industrial powder coat finish
Model # Description
LV 100 7 3/16"H x 6 5/16"W x 4 9/16"D
20
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Replaceable hinged head- Optional mini-breaker protection- Weatherproof Lexan covers for receptacles- Industry standard ASA-61 grey industrial powder coat finish- Custom colors available (consult factory)- Standard template and anchor bolts supplied
TECHNICAL INFORMATION- 8” x 8” baseplate constructed of ¼”THK mild steel- 29 ½”H x 4”W x 4”D body constructed of 1/4” mild steel; other heights
available- Qty. 1 grounding lug- Fully welded base
Receptacles Breakers
Model # Qty. Type Qty. Type
AP 1 2 15A Duplex 4 15A Mini
AP 1M 2 15A Duplex 2 15A Mini
AP 2 1 15A Duplex 2 15A Mini
AP 2M 1 15A Duplex 1 15A Mini
AP 3 2 15A Duplex 0 None
AP 4 1 15A Duplex 0 None
AP SERIES POWER PEDESTALSAP SERIES POWER PEDESTALS
QUALITY IS OUR STRENGTH
21
FEATURES AND BENEFITS- EEMAC/CEMA 3R Enclosure (Weatherproof)- Heavy duty construction- Replaceable hinged head- Optional mini-breaker protection- Weatherproof Lexan covers for receptacles- Industry standard ASA-61 grey industrial powder coat finish- Custom colors available (consult factory)- Standard template and bolts supplied
Type
anchor
TECHNICAL INFORMATION- 8” x 8” baseplate constructed of ¼”THK mild steel- 12”H x 4”W x 4”D body constructed of 1/4” mild steel; other heightsavailable
- Qty. 1 grounding lug- Fully welded base
Receptacles Breakers
Model # Qty. Type Qty. Type
AP 1-S 2 15A Duplex 4 15A Mini
AP 1M-S 2 15A Duplex 2 15A Mini
AP 2-S 1 15A Duplex 2 15A Mini
AP 2M-S 1 15A Duplex 1 15A Mini
AP 3-S 2 15A Duplex 0 None
AP 4-S 1 15A Duplex 0 None
AP-S SHORT SERIES POWER PEDESTALSAP-S SHORT SERIES POWER PEDESTALS
QUALITY IS OUR STRENGTH
NOTE: CONCRETE BY OTHERS
22
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Weatherproof Lexan- Models with breakers include mini-breakers- Industry standard ASA-61 grey industrial powder coat finish- Custom colors available (consult factory)- Standard template and bolts supplied
covers for receptacles
anchor
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of ¼”THK mild steel- 30½”H x 6”W x 4”D body constructed of 12 ga. mild steel- 14¼”H x 5 ¾”W backpan constructed of 14 ga. mild steel- Qty. 1 grounding lug- Fully welded base
Receptacles Breakers
Model # Qty. Type Qty. Type
S3-AP1 2 15A Duplex 4 15A Mini
S3-AP1M 2 15A Duplex 2 15A Mini
S3-AP2 1 15A Duplex 2 15A Mini
S3-AP2M 1 15A Duplex 1 15A Mini
S3-AP3 2 15A Duplex 0 None
S3-AP4 1 15A Duplex 0 None
S3-AP5 3 15A Duplex 0 None
S3-AP6 4 15A Duplex 0 None
S3-AP7 3 15A Duplex 3 15A Mini
S3-AP8 4 15A Duplex 4 15A Mini
SERIES 3 POWER PEDESTALSSERIES 3 POWER PEDESTALS
QUALITY IS OUR STRENGTH
23
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Weatherproof Lexan- Models with breakers include magnetic breakers- Includes 2 line lugs, 1 neutral lug and 1 ground lug (other splitter configurations
available - consult factory for requirements)- Industry standard ASA-61 grey industrial powder coat finish- Custom colors available (consult factory)- Standard template and anchor bolts supplied
covers for receptacles
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of ¼”THK mild steel- 30½”H x 6”W x 4”D body constructed of 12 ga. mild steel- 14¼”H x 5 ¾”W Backpan constructed of 14 ga. mild steel- Standard Qty. 3 B125 splitter bars (125A primary; 70A branch);Higher amperage blocks available
- Qty. 1 grounding lug- Fully welded base
Receptacles Breakers
Model # Qty. Type Qty. Type
S3MB-AP1 2 15A Duplex 4 15A Single Pole
S3MB-AP1M 2 15A Duplex 2 15A Single Pole
S3MB-AP2 1 15A Duplex 2 15A Single Pole
S3MB-AP2M 1 15A Duplex 1 15A Single Pole
S3MB-AP3 2 15A Duplex 0 None
S3MB-AP4 1 15A Duplex 0 None
S3MB-AP5 3 15A Duplex 0 None
S3MB-AP6 4 15A Duplex 0 None
S3MB-AP7 3 15A Duplex 3 15A Single Pole
S3MB-AP8 4 15A Duplex 4 15A Single Pole
SERIES 3 (MB) POWER PEDESTALSSERIES 3 (MB) POWER PEDESTALS
QUALITY IS OUR STRENGTH
24
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Padlockable cover for maximum security- Customizable design (see options below)- Industry standard ASA-61 grey industrial powder coat finish- Standard template and anchor bolts supplied- Standard configuration comes with pad-mount base; direct burial option is
available- Break-away base configuration available
PAR PARKSIDE SERIES POWER PEDESTALSPAR PARKSIDE SERIES POWER PEDESTALS
QUALITY IS OUR STRENGTH
Receptacles Breakers
Model # Qty. Type Qty. Type
PAR 1 1 15A Duplex 1 15A Single Pole
PAR 2 2 15A Duplex 2 15A Single Pole
PAR 3 1 15A Duplex 1 15A Single Pole
1 30A 125V RV 1 30A Single Pole
PAR 3-20 1 15/20A Duplex 1 20A Single Pole
1 30A 125V RV 1 30A Single Pole
PAR 3G 1 15A GFI Duplex 1 15A Single Pole
1 30A 125V RV 1 30A Single Pole
PAR 4 1 30A 125V RV 1 30A Single Pole
PAR 5 1 20A 125V TL 1 20A Single Pole
PAR 6 1 50A 125/250V 1 50A Two Pole
PAR 7 2 30A 125V RV 2 30A Single Pole
PAR 8 1 15A Duplex 1 15A Single Pole
1 50A 125/250V 1 50A Two Pole
PAR 8-20 1 15/20A Duplex 1 20A Single Pole
1 50A 125/250V 1 50A Two Pole
PAR 8G 1 15A GFI Duplex 1 15A Single Pole
1 50A 125/250V 1 50A Two Pole
PAR 9 1 30A 125V RV 1 30A Single Pole
1 50A 125/250V 1 50A Two Pole
PAR 10 1 15A Duplex 1 15A Single Pole
1 30A 125V RV 1 30A Single Pole
1 50A 125/250V 1 50A Two Pole
PAR 10-20 1 15/20A Duplex 1 20A Single Pole
1 30A 125V RV 1 30A Single Pole
1 50A 125/250V 1 50A Two Pole
PAR 10G 1 15A GFI Duplex 1 15A Single Pole
1 30A 125V RV 1 30A Single Pole
1 50A 125/250V 1 50A Two Pole
PAR 1M 1 15A Duplex 2 15A Single Pole
PAR 2M 2 15A Duplex 4 15A Single Pole
PAR 3M 1 15A Duplex 2 15A Single Pole
1 30A 125V RV 1 30A Single Pole
25
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of 10 ga. mild steel or 28 “H
(26” below grade) 14 ga. galvanized steel spade- 34 ½”H x 8”W x 4”D body constructed of 14 ga. wipecoat steel- 14 ¼”H x 5 ¾”W backpan constructed of 14 ga. wipecoat steel- Standard Qty. 3 B125 splitter bars (125A primary; 70A branch)- Qty. 1 grounding lug- Bolted base
PAR PARKSIDE SERIES POWER PEDESTALSPAR PARKSIDE SERIES POWER PEDESTALS
QUALITY IS OUR STRENGTH
Custom Pedestal Ordering
PAR-CXYYY-ZZZ
X = # of receptacles
(3 max.)
Y = receptacle type
Z = Option Group
NOTE: For Further options use APR Series Pedestals
RECEPTACLE
TYPES (Y) OPTION GROUPS (Z)
1 15A Duplex M Metered
A 15A TL HB1 Hose Bib (1)
2 15/20A Duplex HB2 Hose Bib (2)
B 20A TL DB Direct Burial
3 30A BR Break-away Base
C 30A TL
5 50A
G 15A GFI Duplex
26
3 - 30A, 125V RV (#WD6)
C - 30A TL, 125V (#L5-30)
5 - 50A, 125/250V (#5-50)
G - 15A GFI, 125V (#5-15R)
c/w GFI
1 - 15A, 125V (#5-15R)
2 - 20A, 125V (#5-20A)
B - 20A TL, 125V (#L5-20R)
A - 15A TL, 125V (#L5-15R)
RECEPTACLE TYPES (Y)
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Padlockable cover for maximum security- Various splitter configurations available to suit your specific application- Fully customizable design (see options below)- Industry standard ASA-61 grey industrial powder coat finish- Custom colors available (consult factory)- Standard template and anchor bolts supplied
Receptacles Breakers
Model # Qty. Type Qty. Type
APR 1 1 15A Duplex 1 15A Single Pole
APR 2 2 15A Duplex 2 15A Single Pole
APR 3 1 15A Duplex 1 15A Single Pole
1 30A 125V RV 1 30A Single Pole
APR 3-20 1 15/20A Duplex 1 20A Single Pole
1 30A 125V RV 1 30A Single Pole
APR 3G 1 15A GFI Duplex 1 15A Single Pole
1 30A 125V RV 1 30A Single Pole
APR 4 1 30A 125V RV 1 30A Single Pole
APR 5 1 20A 125V TL 1 20A Single Pole
APR 6 1 50A 125/250V 1 50A Two Pole
APR 7 2 30A 125V RV 2 30A Single Pole
APR 8 1 15A Duplex 1 15A Single Pole
1 50A 125/250V 1 50A Two Pole
APR 8-20 1 15/20A Duplex 1 20A Single Pole
1 50A 125/250V 1 50A Two Pole
APR 8G 1 15A GFI Duplex 1 15A Single Pole
1 50A 125/250V 1 50A Two Pole
APR 9 1 30A 125V RV 1 30A Single Pole
1 50A 125/250V 1 50A Two Pole
APR 10 1 15A Duplex 1 15A Single Pole
1 30A 125V RV 1 30A Single Pole
1 50A 125/250V 1 50A Two Pole
APR 10-20 1 15/20A Duplex 1 20A Single Pole
1 30A 125V RV 1 30A Single Pole
1 50A 125/250V 1 50A Two Pole
APR 10G 1 15A GFI Duplex 1 15A Single Pole
1 30A 125V RV 1 30A Single Pole
1 50A 125/250V 1 50A Two Pole
APR 1M 1 15A Duplex 2 15A Single Pole
APR 2M 2 15A Duplex 4 15A Single Pole
APR 3M 1 15A Duplex 2 15A Single Pole
1 30A 125V RV 1 30A Single Pole
APR SERIES POWER PEDESTALSAPR SERIES POWER PEDESTALS
QUALITY IS OUR STRENGTH
27
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of ¼”THK mild steel- 34 ½”H x 6”W x 4”D body constructed of 12 ga. mild steel- 14 ¼”H x 5 ¾”W backpan constructed of 14 ga. mild steel- Standard Qty. 3 B125 splitter bars (125A primary; 70A branch);Higher amperage blocks available
- Qty. 1 grounding lug- Fully welded base
Custom Pedestal Ordering
APR-CXYYYY-ZZZOPTION GROUPS (Z)
X = # of receptacles LVS
Low Voltage Section
(Side)
(4 max.) M Metered
Y = receptacle type SL Side Light
Z = Option Group TL Top Light
BB Back to Back
RECEPTACLE HB1 Hose Bib (1)
TYPES (Y) HB2 Hose Bib (2)
1 15A Duplex WB Wide Body
A 15A TL EWB Extra Wide Body
2 15/20A Duplex TP Telephone
B 20A TL CA Cable
3 30A DC DataComm
C 30A TL MAR Marine Grade
5 50A DB Direct Burial
G 15A GFI Duplex PH Photocell
APR SERIES POWER PEDESTALSAPR SERIES POWER PEDESTALS
QUALITY IS OUR STRENGTH
3 - 30A, 125V RV (#WD6)
C - 30A TL, 125V (#L5-30)
5 - 50A, 125/250V (#5-50)
G - 15A GFI, 125V (#5-15R)
c/w GFI
1 - 15A, 125V (#5-15R)
2 - 20A, 125V (#5-20A)
B - 20A TL, 125V (#L5-20R)
A - 15A TL, 125V (#L5-15R)
RECEPTACLE TYPES (Y)
28
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Padlockable cover for maximum security- Various Splitter configurations available to suit your specific application- Fully customizable design (see options below)- Industry standard ASA-61 grey industrial powder coat finish- Custom colors available (consult factory)- Standard template and bolts suppliedanchor
TECHNICAL INFORMATION- Split configuration to allow lower amperage feeds- 10” x 10” baseplate constructed of ¼”THK mild steel- 34 ½”H x 6”W x 4”D body constructed of 12 ga. mild steel- 14 ¼”H x 5 ¾”W backpan constructed of 14 ga. mild steel- Standard Qty. 3 B125 splitter bars (125A primary; 70A branch);Higher amperage blocks available
- Qty. 1 grounding lug- Fully welded base
Receptacles Breakers
Model # Qty. Type Qty. Type
APRS 3 1 15A Duplex 1 15A Single Pole
1 30A 125V RV 1 30A Single Pole
APRS 8 1 15A Duplex 1 15A Single Pole
1 50A 125/250V 1 50A 2 Pole
APRS 9 1 30A 125V RV 1 30A Single Pole
1 50A 125/250V 1 50A 2 Pole
APRS 10 1 15A Duplex 1 15A Single Pole
1 30A 125V RV 1 30A Single Pole
1 50A 125/250V 1 50A 2 Pole
Custom Pedestal Ordering
APR-CXYYYY-ZZZOPTION GROUPS (Z)
X = # of receptacles LVS
Low Voltage Section
(Side)
Y = receptacle type M Metered
(4 max.) SL Side Light
Z = Option Group TL Top Light
BB Back to Back
RECEPTACLE HB1 Hose Bib (1)
TYPES (Y) HB2 Hose Bib (2)
1 15A Duplex WB Wide Body
A 15A TL EWB Extra Wide Body
2 15/20A Duplex TP Telephone
B 20A TL CA Cable
3 30A DC DataComm
C 30A TL MAR Marine Grade
5 50A DB Direct Burial
G 15A GFI Duplex PH Photocell
APR SERIES (SPLIT) POWER PEDESTALSAPR SERIES (SPLIT) POWER PEDESTALS
QUALITY IS OUR STRENGTH
APRS-3 WIRING APRS-8 WIRING
APRS-9 WIRING APRS-10 WIRING
29
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty aluminum construction- Padlockable cover for maximum security- Optional built in docking light feature c/w light control (photocell) for efficient
illumination--- Marine- C
Various splitter configurations available to suit your specific applicationFully customizable design (see options below)
standard white industrial powder coat finishustom colors available (consult factory)
Standard template and anchor bolts suppliedngled entry
-- A receptacles
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of 1/4”THK aluminum- 34 ½”H x 6”W x 4”D body constructed of 10 ga. aluminum- 14 ¼”H x 5 ¾”W backpan constructed of 12 ga. aluminum- Standard Qty. 3 B125 splitter bars (125A primary; 70A
branch); Higher amperage blocks available- Qty. 1 grounding lug- Fully welded base- Durable high impact housing on photocell
Custom Pedestal Ordering
APR-CXYYYY-ZZZOPTION GROUP (Z)
MAR Marine Grade
PH Photocell
RECEPTACLE
TYPES (Y)
1 15A Duplex X = # of receptacles
A 15A TL Y = receptacle type
2 15/20A Duplex (4 max.)
B 20A TL Z = Option Group
3 30A
C 30A TL
5 50A
G 15A GFI Duplex
APR MARINE GRADE POWER PEDESTALSAPR MARINE GRADE POWER PEDESTALS
QUALITY IS OUR STRENGTH
30
Custom Pedestal Ordering
APR-CXYYYY-ZZZOPTION GROUP (Z)
LVSLow Voltage Section
RECEPTACLE
TYPES (Y)
1 15A Duplex X = # of receptacles
A 15A TL Y = receptacle type
2 15/20A Duplex (4 max.)
B 20A TL Z = Option Group
3 30A
C 30A TL
5 50A
G 15A GFI Duplex
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Padlockable cover for maximum security- Side fed low voltage section for maximum wiring space (removable plate)--- Industry standard ASA-61 grey i- C
Various splitter configurations available to suit your specific applicationFully customizable design (see options below)
ndustrial powder coat finishustom colors available (consult factory)
Standard template and anchor bolts supplied-
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of 1/4”THK mild steel- 34 ½”H x 8”W x 6”D body constructed of 12 ga. mild steel- 14 ¼”H x 5 ¾”W backpan constructed of 14 ga. mild steel- Standard Qty. 3 B125 splitter bars (125A primary; 70A branch);Higher amperage blocks available
- Qty. 1 grounding lug- Fully welded base
APR LOW VOLTAGE POWER PEDESTALSAPR LOW VOLTAGE POWER PEDESTALS
QUALITY IS OUR STRENGTH
31
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Padlockable cover for maximum security--- Industry standard ASA-61 grey i- C
Various splitter configurations available to suit your specific applicationFully customizable design (see options below)
ndustrial powder coat finishustom colors available (consult factory)
Standard template and anchor bolts supplied-
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of 1/4”THK mild steel- 34 ½”H x 8”W x 6”D body constructed of 12 ga. mild steel (WB)- 34 ½”H x 10”W x 8”D body constructed of 12 ga. mild steel (EWB)- 14 ¼”H x 5 ¾”W backpan constructed of 14 ga. mild steel- Standard Qty. 3 B125 splitter bars (125A primary; 70A branch);Higher amperage blocks available
- Qty. 1 grounding lug- Fully welded base
Custom Pedestal Ordering
APR-CXYYYY-ZZZOPTION GROUP (Z)
WB Wide Body
EWB Extra Wide Body
RECEPTACLE
TYPES (Y)
1 15A Duplex X = # of receptacles
A 15A TL Y = receptacle type
2 15/20A Duplex (4 max.)
B 20A TL Z = Option Group
3 30A
C 30A TL
5 50A
G 15A GFI Duplex
Wide Body (WB)
Extra Wide Body (EWB)
APR WIDE & EXTRA WIDE BODY
POWER PEDESTALS
APR WIDE & EXTRA WIDE BODY
POWER PEDESTALS
QUALITY IS OUR STRENGTH
32
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Padlockable cover for maximum security- Industry standard copper manifolds, piping and faucets
--- Industry standard ASA-61 grey i- C
- Steel bib for complete isolation of water feed from electrical components- Available in single or back-to-back head applications
Various splitter configurations available to suit your specific applicationFully customizable design (see options below)
ndustrial powder coat finishustom colors available (consult factory)
Standard template and anchor bolts supplied-
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of 1/4”THK mild steel- 34 ½”H x 6”W x 4”D body constructed of 12 ga. mild steel- 34 ½”H x 6”W x 7 ½ ”D body constructed of 12 ga. mild steel- 14 ¼”H x 5 ¾”W backpan constructed of 14 ga. mild steel- manifold, pipe and faucet constructed of plumbing grade Copper- Standard Qty. 3 B125 splitter bars (125A primary; 70A branch);Higher amperage blocks available
- Qty. 1 grounding lug- Fully welded base
Custom Pedestal Ordering
APR-CXYYYY-ZZZOPTION GROUP (Z)
HB1 Hose Bib (1)
HB2 Hose Bib (2)
RECEPTACLE
TYPES (Y)
1 15A Duplex X = # of receptacles
A 15A TL Y = receptacle type
2 15/20A Duplex (4 max.)
B 20A TL Z = Option Group
3 30A
C 30A TL
5 50A
G 15A GFI Duplex
Back-To-Back
Single
APR HOSE BIB POWER PEDESTALSAPR HOSE BIB POWER PEDESTALS
QUALITY IS OUR STRENGTH
33
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Padlockable cover for maximum security- Built in docking light feature c/w light control (photocell) for efficient illumination--- Industry standard ASA-61 grey i- C
Various splitter configurations available to suit your specific applicationFully customizable design (see options below)
ndustrial powder coat finishustom colors available (consult factory)
Standard template and anchor bolts supplied-
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of 1/4”THK mild steel- 34 ½”H x 6”W x 4”D body constructed of 12 ga. mild steel- 14 ¼”H x 5 ¾”W backpan constructed of 14 ga. mild steel- Standard Qty. 3 B125 splitter bars (125A primary; 70A branch);Higher amperage blocks available
- Qty. 1 grounding lug- Fully welded base- Durable high impact housing on photocell- 75 Watt Top Light fixture
Custom Pedestal Ordering
APR-CXYYYY-ZZZOPTION GROUP (Z)
TL Top Light
PH Photocell
RECEPTACLE
TYPES (Y)
1 15A Duplex X = # of receptacles
A 15A TL Y = receptacle type
2 15/20A Duplex (4 max.)
B 20A TL Z = Option Group
3 30A
C 30A TL
5 50A
G 15A GFI Duplex
APR TOP LIGHT POWER PEDESTALSAPR TOP LIGHT POWER PEDESTALS
QUALITY IS OUR STRENGTH
34
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Padlockable cover for maximum security- Built in docking light feature c/w light control (photocell) for efficient illumination--- Industry standard ASA-61 grey i- C
Various splitter configurations available to suit your specific applicationFully customizable design (see options below)
ndustrial powder coat finishustom colors available (consult factory)
Standard template and anchor bolts supplied-
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of 1/4”THK mild steel- 34 ½”H x 6”W x 4”D body constructed of 12 ga. mild steel- 14 ¼”H x 5 ¾”W backpan constructed of 14 ga. mild steel- Standard Qty. 3 B125 splitter bars (125A primary; 70A branch);Higher amperage blocks available
- Qty. 1 grounding lug- Fully welded base- Durable high impact housing on photocell- 60 Watt Side Light fixture
Custom Pedestal Ordering
APR-CXYYYY-ZZZOPTION GROUP (Z)
SL Side Light
PH Photocell
RECEPTACLE
TYPES (Y)
1 15A Duplex X = # of receptacles
A 15A TL Y = receptacle type
2 15/20A Duplex (4 max.)
B 20A TL Z = Option Group
3 30A
C 30A TL
5 50A
G 15A GFI Duplex
APR SIDE LIGHT POWER PEDESTALSAPR SIDE LIGHT POWER PEDESTALS
QUALITY IS OUR STRENGTH
35
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Heavy duty construction- Padlockable cover for maximum security- Built in docking light feature c/w light control (photocell) for efficient illumination--- Industry- C
Various splitter configurations available to suit your specific applicationFully customizable design (see options below)
standard ASA-61 grey industrial powder coat finishustom colors available (consult factory)
Standard template and anchor bolts supplied-- Back to back design for easy access
TECHNICAL INFORMATION- 10” x 10” baseplate constructed of 1/4”THK mild steel construction- 34 ½”H x 6 ¼”W x 7 ¼”D body constructed of 12 ga. mild steel- 14 ¼”H x 5 ¾”W backpan constructed of 14 ga. mild steel- Standard Qty. 3 B125 splitter bars (125A primary; 70A branch);Higher amperage blocks available
- Qty. 1 grounding lug- Fully welded base
Custom Pedestal Ordering
APR-CXYYYY-ZZZOPTION GROUP (Z)
BB Back to Back
RECEPTACLE
TYPES (Y)
1 15A Duplex X = # of receptacles
A 15A TL Y = receptacle type
2 15/20A Duplex (4 max.)
B 20A TL Z = Option Group
3 30A
C 30A TL
5 50A
G 15A GFI Duplex
APR BACK TO BACK POWER PEDESTALSAPR BACK TO BACK POWER PEDESTALS
QUALITY IS OUR STRENGTH
36
FEATURES AND BENEFITS- EEMAC/CEMA Type 3R Enclosure (Weatherproof)- Galvanized steel construction- Wall or fence mounting- Models with breakers include mini breakers- Weatherproof Lexan covers for receptacles- 15A duplex receptacles- Custom configurations available (consult factory)
TECHNICAL INFORMATION- 6”H x 6”W x 4”D body constructed of 16 ga. galvanized steel- Qty. 1 grounding lug
APB PARKING LOT OUTLET BOXESAPB PARKING LOT OUTLET BOXES
QUALITY IS OUR STRENGTH
Receptacles Breakers
Model # Qty. Type Qty. Type
APB 11 1 15A Duplex 0 none
APB 12 1 15A Duplex 1 15A Mini
APB 13 1 15A Duplex 2 15A Mini
37
Model #
Primary
Amps Primary Wire Size
Branch
Amps
Branch
Wire Size
P - 125 125 #14 to 1/O 70 #14 to #2
P - 225 225 #6 to 300 MCM 125 #14 to 2/O
P - 225M 225 (2) #6 to 300 MCM 125 #14 to 2/O
P - 400 400 #4 to 600 MCM or 125 #6 to 3/O
(2) 250 MCM to 1/O
P - 600 600 (2) #4 to 600 MCM 125 #14 to 3/O
FEATURES AND BENEFITS- Each block has one main and six secondaries
TECHNICAL INFORMATION- Electro-tin plated lugs- 600V Cu/Al rated- All lugs mounted on CYCOLAC or POCAN 4225 Glastic insulators
SPLITTER BLOCKS FOR POWER PEDESTALSSPLITTER BLOCKS FOR POWER PEDESTALS
QUALITY IS OUR STRENGTH
P-225 P-225M
P-600P-400
P-125
38
MODULAR RACK (MRS)
HUB SHELF (HB)WALL-MOUNT BRACKET (WB)
SMARTRAK (ASR)
WALL-MOUNT RACK (AWMR)
ACE DATA PRODUCTS - 19” EIA RACKSACE DATA PRODUCTS - 19” EIA RACKS
QUALITY IS OUR STRENGTH
39
CENTER-MOUNT SHELF (ACM) CANTILEVER SHELF (ACS)
EQUIPMENT SHELF (AES) SLIDING EQUIPMENT SHELF (ASE)
BLANK PANEL (PBK) RING WIRE MANAGEMENT (PRW)
ACE DATA PRODUCTS -
19” EIA RACK-MOUNT ACCESSORIES
ACE DATA PRODUCTS -
19” EIA RACK-MOUNT ACCESSORIES
QUALITY IS OUR STRENGTH
40
Ace has been manufacturing quality electrical, electronic and
data enclosures since 1977. Our philosophy has always
been to design and build product for you, our customer.
Therefore, custom manufacturing is our specialty. Whether
you are looking for a few or plenty we have the capabilities to
provide you with the quality product you deserve. We are able to
assist you from inception in the prototype stage with qualified
designers and drafters through production to the completed product.
You can rely on us to provide you with the full turn-key solution for all your metal needs including
manufacturing and fabrication of precision metal enclosures, consoles, power pedestals, chassis,
modular cabinets, data racks and customer specified products. We work with various substrates
including mild, galvanized and stainless steel, and aluminums. Finishes include powder coating, zinc
plating, cadmium plating, hot dipped galvanizing, anodizing, and industrial silk-screening.
ISO 9002
ACE MANUFACTURING METALS LTD.
Box 500, Bittern Lake, Alberta T0C 0L0 Canada
Toll Free: (866) 352-7145 • Tel. (780) 352-7145
Fax (780) 352-7147 • www.acemfg.com