Transcript
Page 1: Wall-Mounted Cutoff Mini Area Lighter, Wall-Paks ... · PDF filePolycarbonate Refractor, Lamp Included Use for entrances, ... injection-molded polycarbonate, ... (TT, DTT) or electronic

Wall-Mounted Cutoff Mini Area Lighter,Polycarbonate Refractor, Lamp Included

Use for entrances, stairwells, corridors and other pedestrian areas.

Wall-Paks

Catalog Number

Designation

HIGH PRESSURE SODIUM35W TWAC 35S1

BOW TWAC 60S2

70W TWAC 70S100W TWAC 100S

METAL HALIDEBOW TWAC BOM70W TWAC 70M

100W TWAC 100M

COMPACT FLUORESCENT

Example: TWAC 100M 120 LPI

I IVoltage Options/Accessories

LPI is standard on all TWA fixtures(not available with incandescent)For options and accessories, see

page 312

1202084

2404

277347TB3

22W26W28W32W42W

TWAC 22DTTTWAC 26DTTTWAC 28DTTTWAC 32TRTTWAC 42TRT

STANDARD PACKAGINGFixtures ship complete in unit cartonsonly Example

(Qty 13) TWAC 100M 120 LPI(13 cartons of 1 fixture)

Accessor ies ship separately

All dimensions are inches (centimeters)unless otherwise specified

NOTES1 120Vonly2 120Vor277Vonly3 Optionalmulti-tapballast(120,208,240,277V)

(120,277,347VmCanada)4 Consult factory for availability in Canada

CANADIAN SHIPMENTS Add CSA as suffix tocatalog numberHID and fluorescent lamps included with lumi-naire

1 11 1

Lamp/Fixture/Ballast DataWeight

Wattage Ballast Lbs Kg______

HIGH PRESSURE SODIUM (Med/Clear)35 RNP50 RNP50 XHP70 RNP100 RNP

METAL HALIDE50 XHP70 XHP100 XHP

1 1 51 1 51 1 5

1 4 6 41 4 6 414 6.4

DIMENSIONSHeight 1 0 ( 2 5 4 )Width 11 1/2 (292)Depth 8 1 5 / 1 6 (52)

V

/

1

X^ ° _S

^ _____ ,., _____ ̂

1-

1 1

•c ——

•'International.

:Dark Sky"•.•Member .;,'

TWACContour Series®

FeaturesHousing: Rear housing is rugged, corro-sion-resistant, die-cast aluminum. Frontcover is one-piece, UV-resistant, injection-molded polycarbonate, internally painted.Captive external hardware is treated furcorrosion resistance and included slottedhex-head and tamperproof fasteners.

Optics: One-piece, die-formed reflector is dif-fused aluminum. Refractor is clear polycar-bonate, providing IBS cutoff distribution andmaximum lateral light output. Front cover issealed and gasketed to inhibit the entranceof outside contaminants.

Lamp: Medium-base HPS, MH or two/four-pm fluorescent lamps included.

Ballast: MH: high-reactance, high-powerfactor standard. HPS: Reactor normal powerfactor standard, HPF available. UL listed.Electrical components are mounted to thecast-aluminum housing, promoting maximumheat dissipation. (For 50 hertz availability,consult factory). Fluorescent ballasts aremagnetic NPF (TT, DTT) or electronic HPF(TRT). Encased and potted solid-state igm-tors (HPS). HID ballasts are 100% factorytested and UL listed. Fluorescent ballasts areUL listed. Components are heat-smked di-rectly to the cast housing for maximum heatdissipation. (For 50 hertz availability, consultfactory.)

Installation: Mount to any vertical surfaceor to a A" round or A" equaro outlot box Dockaccess through gasketed slot. Top wiringaccess Xhrought A/2" thveaded conduit en-try. (Through-wiring requires use of a con-duit tee.) Photocells are field-installable.

Socket: HID is porcelain, horizontally ori-ented medium-base socket with copperalloy, nickel-plated screw shell and centercontact. UL listed 660W, 600V and 4kVpulse rated. Fluorescent socket is two-pin(DTT) or four-pin (TRT), positive latchingthermoplast ic .

Listings: UL, listed suitable for wet loca-tions. IP65 rated in accordance with IECStandard 529. Listed and labeled to complywith Canadian Standards.

fA L/THtJN/A UBHT/NB PSG6 269

Page 2: Wall-Mounted Cutoff Mini Area Lighter, Wall-Paks ... · PDF filePolycarbonate Refractor, Lamp Included Use for entrances, ... injection-molded polycarbonate, ... (TT, DTT) or electronic

Rough Service Lighting

VR3CVR4C

VR4C

FeaturesLens: Clear prismatic polycarbonate, UV-stabilized, nominal thickness .125". Prism op-tics provide uniformity with maximum spac-ing-to-mounting height ratios. Lens securedby tamper-resistant Torx®-head TX20 orstandard slotted hex-head screws (foureach included). One-piece silicone perime-ter gasket seals out moisture and contami-nants. ;

Housing: One-piece, die-castaluminum, lowcopper alloy, finished in dark bronze polyes-ter powder coat. 1

Lamps: Included unless L/LP is specified.MH: reduced-UV lamp is standard.

Ballast: Fluorescent: electronic, high pow-er factor, starting temperature 0°F (-18°C).Exception: 22DTT and 28DTT are electro-magnetic, 120V only. HID: high-reactance,high power factor (175M is constant-watt-age autotransformer).

Socket: Fluorescent: horizontally-mountedthermoplastic. HID: medium-base porcelainwith copper alloy, nickel-plated screw shelland center contact. UL listed 660W, 600V,4KV pulse rated.

Installation: Wall- or cei l ing-mountedas indicated. For maximum vandal resis-tance, use four-hole mounting pattern.

Listings: UL listed for damp locations (wetlocations in covered ceiling applicationsonly). Incandescent: U L 1 5 7 1 listed. Fluores-cent: UL 1570 listed. Listed and labeled tocomply with Canadian Standards.466

Clear Polycarbonate LensCompact Fluorescent/HID

Catalog Number Example: VR3C 32TRT 120 GLR LPI

SeriesVR3C 9"x9"

VR4C 1 2 " x 1 2 "

Lamp type4

VR3C VR4CFluorescent

2/7TT6

2/9TT

twin-tube(s)2/7TT6

2/9TT13TT6

2/13TT

Voltage1201 , 2088,

2408, 27718 , 347,4808, TB2'8

Lamps23

LPI Lamp(s)included(standard)

L/LP Less lamp(s)

Options

Double twin-tube(s)18DTT

2/18DTT22DTT56

2/22DTT56

26DTT2/26DTT28DTT56

18DTT2/18DTT22DTT56

2/22DTT56

26DTT2/26DTT28DTT56

2/28DTT56

Triple-tube(s)26TRT 26TRT

2/26TRT 2/26TRT32TRT 32TRT

— 2/32TRT42TRT 42TRT

— 2/42TRT

High Pressure Sodium

35S 35SSOS SOS70S6 70S6

100S 100S— 150S

Metal HalideBOM 50M

70M10 70M10

100M1 100M— 150M7

— 1 7 5 M 7 1 2

L/LP Less lamp4

SF Single fuse (120 - 277)8

DF Double fuse (208 - 240)8

QRS Quartz restrike system (incandes-cent: 7W max.)8

EC Emergency circuit (DC bayonetbase, 15T7DC)8

ML Night-light8

PE PhotocellIR Internal shield Reflector3

GLR Internal fast-blow fusing9

GMF Internal slow-blow fusing9

WP White polycarbonate lensCSA Listed and labeled to comply with

Canadian StandardsNOM Listed and labeled to comply with

Mexican Standards

NOTES:1 Provided with dual tap (120/277V) ballast when ordered

as120Vor277V HIDonly2 Multi-tapballast(120,208,240, 277V) HIDonly.3 Wall mounted units require IR option.4 Lamp(s) included unless specified L/LP5 2-Pin 15mm lamp6 120voltonly.7 Ceiling mount only.8 Available only on HID units9 Compact fluorescent only

10 Notavailablem480V11 Must specify voltage for dual or multi-tap ballast.12 Notavailablein208V,240VorTB.

Lamp/Fixture DataWeight

Wattage Ballast Lbs Lamp BaseFLUORESCENT

13W18W22W26W28W32W42W

Electromagnetic, NPFElectronic, HPFElectromagnetic, HPFElectronic, HPFElectromagnetic, HPFElectronic, HPFElectronic, HPF

8.508.509.008509.308.508.55

GX23G24q-2

GX32d-2G/GX24q-3

GX32d-3GX24q-3GX24q-4

HIGH PRESSURE SODIUM35W50W70W100W150W

R-HPFHX-HPFHX-HPFHX-HPFHX-HPF

13.6516.3012.8014.6011.45

Med.Med.MedMed.Med.

METALHALIDE50W70W100W150W175W

HX-HPFHX-HPFHX-HPFHX-HPFCWA

11.4012.8014.9515.8515.40

Med.Med.Med.Med.Med.

(A)

(B)

(0 I

DIMENSIONSAll dimensions are inches (centimeters)

A. HeightB. Width:C. Overall Depth:D.Housing Depth:

VR3C9(229)9(22.9)7 *4 (19 1 )3% (9.5)

VR4C12(30.5)12(30.5)9'/2(24.1)4 (10.2)

PSG6 f* L/THON/A L/BHT/NB

VR3C


Top Related